* [PATCH 1/2] ASoC: bindings: fsl_spdif: Add new compatible string for imx6sx @ 2020-06-16 6:42 Shengjiu Wang 2020-06-16 6:42 ` [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform Shengjiu Wang 0 siblings, 1 reply; 4+ messages in thread From: Shengjiu Wang @ 2020-06-16 6:42 UTC (permalink / raw) To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai, alsa-devel, lgirdwood, robh+dt, devicetree Cc: linuxppc-dev, linux-kernel Add new compatible string "fsl,imx6sx-spdif" in the binding document. And add compatible string "fsl,vf610-spdif" which was missed before. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- Documentation/devicetree/bindings/sound/fsl,spdif.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 8b324f82a782..e1365b0ee1e9 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -6,7 +6,11 @@ a fibre cable. Required properties: - - compatible : Compatible list, must contain "fsl,imx35-spdif". + - compatible : Compatible list, should contain one of the following + compatibles: + "fsl,imx35-spdif", + "fsl,vf610-spdif", + "fsl,imx6sx-spdif", - reg : Offset and length of the register set for the device. -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform 2020-06-16 6:42 [PATCH 1/2] ASoC: bindings: fsl_spdif: Add new compatible string for imx6sx Shengjiu Wang @ 2020-06-16 6:42 ` Shengjiu Wang 2020-06-16 23:28 ` Nicolin Chen 0 siblings, 1 reply; 4+ messages in thread From: Shengjiu Wang @ 2020-06-16 6:42 UTC (permalink / raw) To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai, alsa-devel, lgirdwood, robh+dt, devicetree Cc: linuxppc-dev, linux-kernel The one difference on imx6sx platform is that the root clock is shared with ASRC module, so we add a new flags "ind_root_clk" which means the root clock is independent, then we will not do the clk_set_rate and clk_round_rate to avoid impact ASRC module usage. As add a new flags, we include the soc specific data struct. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- sound/soc/fsl/fsl_spdif.c | 43 +++++++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 1b2e516f9162..00e06803d32f 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -42,6 +42,17 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; #define DEFAULT_RXCLK_SRC 1 +/** + * struct fsl_spdif_soc_data: soc specific data + * + * @imx: for imx platform + * @ind_root_clk: flag for round clk rate + */ +struct fsl_spdif_soc_data { + bool imx; + bool ind_root_clk; +}; + /* * SPDIF control structure * Defines channel status, subcode and Q sub @@ -93,6 +104,7 @@ struct fsl_spdif_priv { struct snd_soc_dai_driver cpu_dai_drv; struct platform_device *pdev; struct regmap *regmap; + const struct fsl_spdif_soc_data *soc; bool dpll_locked; u32 txrate[SPDIF_TXRATE_MAX]; u8 txclk_df[SPDIF_TXRATE_MAX]; @@ -110,6 +122,21 @@ struct fsl_spdif_priv { u32 regcache_srpc; }; +static struct fsl_spdif_soc_data fsl_spdif_vf610 = { + .imx = false, + .ind_root_clk = true, +}; + +static struct fsl_spdif_soc_data fsl_spdif_imx35 = { + .imx = true, + .ind_root_clk = true, +}; + +static struct fsl_spdif_soc_data fsl_spdif_imx6sx = { + .imx = true, + .ind_root_clk = false, +}; + /* DPLL locked and lock loss interrupt handler */ static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv) { @@ -421,7 +448,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream, sysclk_df = spdif_priv->sysclk_df[rate]; /* Don't mess up the clocks from other modules */ - if (clk != STC_TXCLK_SPDIF_ROOT) + if (clk != STC_TXCLK_SPDIF_ROOT || !spdif_priv->soc->ind_root_clk) goto clk_set_bypass; /* The S/PDIF block needs a clock of 64 * fs * txclk_df */ @@ -1186,7 +1213,8 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, continue; ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index, - i == STC_TXCLK_SPDIF_ROOT); + i == STC_TXCLK_SPDIF_ROOT && + spdif_priv->soc->ind_root_clk); if (savesub == ret) continue; @@ -1230,6 +1258,12 @@ static int fsl_spdif_probe(struct platform_device *pdev) spdif_priv->pdev = pdev; + spdif_priv->soc = of_device_get_match_data(&pdev->dev); + if (!spdif_priv->soc) { + dev_err(&pdev->dev, "failed to get soc data\n"); + return -ENODEV; + } + /* Initialize this copy of the CPU DAI driver structure */ memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai)); spdif_priv->cpu_dai_drv.name = dev_name(&pdev->dev); @@ -1359,8 +1393,9 @@ static const struct dev_pm_ops fsl_spdif_pm = { }; static const struct of_device_id fsl_spdif_dt_ids[] = { - { .compatible = "fsl,imx35-spdif", }, - { .compatible = "fsl,vf610-spdif", }, + { .compatible = "fsl,imx35-spdif", .data = &fsl_spdif_imx35, }, + { .compatible = "fsl,vf610-spdif", .data = &fsl_spdif_vf610, }, + { .compatible = "fsl,imx6sx-spdif", .data = &fsl_spdif_imx6sx, }, {} }; MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids); -- 2.21.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform 2020-06-16 6:42 ` [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform Shengjiu Wang @ 2020-06-16 23:28 ` Nicolin Chen 2020-06-17 3:43 ` Shengjiu Wang 0 siblings, 1 reply; 4+ messages in thread From: Nicolin Chen @ 2020-06-16 23:28 UTC (permalink / raw) To: Shengjiu Wang Cc: timur, Xiubo.Lee, festevam, broonie, perex, tiwai, alsa-devel, lgirdwood, robh+dt, devicetree, linuxppc-dev, linux-kernel On Tue, Jun 16, 2020 at 02:42:41PM +0800, Shengjiu Wang wrote: > The one difference on imx6sx platform is that the root clock > is shared with ASRC module, so we add a new flags "ind_root_clk" > which means the root clock is independent, then we will not > do the clk_set_rate and clk_round_rate to avoid impact ASRC > module usage. > > As add a new flags, we include the soc specific data struct. > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > --- > sound/soc/fsl/fsl_spdif.c | 43 +++++++++++++++++++++++++++++++++++---- > 1 file changed, 39 insertions(+), 4 deletions(-) > > diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c > index 1b2e516f9162..00e06803d32f 100644 > --- a/sound/soc/fsl/fsl_spdif.c > +++ b/sound/soc/fsl/fsl_spdif.c > @@ -42,6 +42,17 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; > > #define DEFAULT_RXCLK_SRC 1 > > +/** > + * struct fsl_spdif_soc_data: soc specific data > + * > + * @imx: for imx platform > + * @ind_root_clk: flag for round clk rate > + */ > +struct fsl_spdif_soc_data { > + bool imx; > + bool ind_root_clk; "ind" doesn't look very straightforward; maybe "shared_root_clock"? And for its comments: * @shared_root_clock: flag of sharing a clock source with others; * so the driver shouldn't set root clock rate > +}; > + > /* > * SPDIF control structure > * Defines channel status, subcode and Q sub > @@ -93,6 +104,7 @@ struct fsl_spdif_priv { > struct snd_soc_dai_driver cpu_dai_drv; > struct platform_device *pdev; > struct regmap *regmap; > + const struct fsl_spdif_soc_data *soc; Looks better if we move it to the top of the list :) > @@ -421,7 +448,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream, > sysclk_df = spdif_priv->sysclk_df[rate]; > > /* Don't mess up the clocks from other modules */ > - if (clk != STC_TXCLK_SPDIF_ROOT) > + if (clk != STC_TXCLK_SPDIF_ROOT || !spdif_priv->soc->ind_root_clk) > goto clk_set_bypass; > > /* The S/PDIF block needs a clock of 64 * fs * txclk_df */ > @@ -1186,7 +1213,8 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, > continue; > > ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index, > - i == STC_TXCLK_SPDIF_ROOT); > + i == STC_TXCLK_SPDIF_ROOT && > + spdif_priv->soc->ind_root_clk); Having more than one place that checks the condition, we can add: /* Check if clk is a root clock that does not share clock source with others */ static inline bool fsl_spdif_can_set_clk_rate(struct fsl_spdif_priv *spdif, int clk) { return (clk == STC_TXCLK_SPDIF_ROOT) && !spdif->soc->shared_root_clock; } ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform 2020-06-16 23:28 ` Nicolin Chen @ 2020-06-17 3:43 ` Shengjiu Wang 0 siblings, 0 replies; 4+ messages in thread From: Shengjiu Wang @ 2020-06-17 3:43 UTC (permalink / raw) To: Nicolin Chen Cc: Shengjiu Wang, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux-ALSA, Timur Tabi, Xiubo Li, Liam Girdwood, linuxppc-dev, Takashi Iwai, Rob Herring, Mark Brown, Fabio Estevam, linux-kernel On Wed, Jun 17, 2020 at 7:30 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote: > > On Tue, Jun 16, 2020 at 02:42:41PM +0800, Shengjiu Wang wrote: > > The one difference on imx6sx platform is that the root clock > > is shared with ASRC module, so we add a new flags "ind_root_clk" > > which means the root clock is independent, then we will not > > do the clk_set_rate and clk_round_rate to avoid impact ASRC > > module usage. > > > > As add a new flags, we include the soc specific data struct. > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > > --- > > sound/soc/fsl/fsl_spdif.c | 43 +++++++++++++++++++++++++++++++++++---- > > 1 file changed, 39 insertions(+), 4 deletions(-) > > > > diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c > > index 1b2e516f9162..00e06803d32f 100644 > > --- a/sound/soc/fsl/fsl_spdif.c > > +++ b/sound/soc/fsl/fsl_spdif.c > > @@ -42,6 +42,17 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; > > > > #define DEFAULT_RXCLK_SRC 1 > > > > +/** > > + * struct fsl_spdif_soc_data: soc specific data > > + * > > + * @imx: for imx platform > > + * @ind_root_clk: flag for round clk rate > > + */ > > +struct fsl_spdif_soc_data { > > + bool imx; > > + bool ind_root_clk; > > "ind" doesn't look very straightforward; maybe "shared_root_clock"? > > And for its comments: > * @shared_root_clock: flag of sharing a clock source with others; > * so the driver shouldn't set root clock rate > > > +}; > > + > > /* > > * SPDIF control structure > > * Defines channel status, subcode and Q sub > > @@ -93,6 +104,7 @@ struct fsl_spdif_priv { > > struct snd_soc_dai_driver cpu_dai_drv; > > struct platform_device *pdev; > > struct regmap *regmap; > > + const struct fsl_spdif_soc_data *soc; > > Looks better if we move it to the top of the list :) > > > @@ -421,7 +448,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream, > > sysclk_df = spdif_priv->sysclk_df[rate]; > > > > /* Don't mess up the clocks from other modules */ > > - if (clk != STC_TXCLK_SPDIF_ROOT) > > + if (clk != STC_TXCLK_SPDIF_ROOT || !spdif_priv->soc->ind_root_clk) > > goto clk_set_bypass; > > > > /* The S/PDIF block needs a clock of 64 * fs * txclk_df */ > > @@ -1186,7 +1213,8 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, > > continue; > > > > ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index, > > - i == STC_TXCLK_SPDIF_ROOT); > > + i == STC_TXCLK_SPDIF_ROOT && > > + spdif_priv->soc->ind_root_clk); > > Having more than one place that checks the condition, we can add: > > /* Check if clk is a root clock that does not share clock source with others */ > static inline bool fsl_spdif_can_set_clk_rate(struct fsl_spdif_priv *spdif, int clk) > { > return (clk == STC_TXCLK_SPDIF_ROOT) && !spdif->soc->shared_root_clock; > } will update them in v2 best regards wang shengjiu ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-06-17 3:43 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-06-16 6:42 [PATCH 1/2] ASoC: bindings: fsl_spdif: Add new compatible string for imx6sx Shengjiu Wang 2020-06-16 6:42 ` [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform Shengjiu Wang 2020-06-16 23:28 ` Nicolin Chen 2020-06-17 3:43 ` Shengjiu Wang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).