[PATCH net-next v8 0/5] RGMII Internal delay common property

[PATCH net-next v8 0/5] RGMII Internal delay common property

[Dan Murphy]

Hello

The RGMII internal delay is a common setting found in most RGMII capable PHY
devices.  It was found that many vendor specific device tree properties exist
to do the same function. This creates a common property to be used for PHY's
that have internal delays for the Rx and Tx paths.

If the internal delay is tunable then the caller needs to pass the internal
delay array and the return will be the index in the array that was found in
the firmware node.

If the internal delay is fixed then the caller only needs to indicate which
delay to return.  There is no need for a fixed delay to add device properties
since the value is not configurable. Per the ethernet-controller.yaml the
interface type indicates that the PHY should provide the delay.

This series contains examples of both a configurable delay and a fixed delay.

Dan Murphy (5):
  dt-bindings: net: Add tx and rx internal delays
  net: phy: Add a helper to return the index for of the internal delay
  dt-bindings: net: Add RGMII internal delay for DP83869
  net: dp83869: Add RGMII internal delay configuration
  net: phy: DP83822: Add setting the fixed internal delay

 .../devicetree/bindings/net/ethernet-phy.yaml |  13 +++
 .../devicetree/bindings/net/ti,dp83869.yaml   |  16 ++-
 drivers/net/phy/dp83822.c                     |  78 ++++++++++++--
 drivers/net/phy/dp83869.c                     |  53 +++++++++-
 drivers/net/phy/phy_device.c                  | 100 ++++++++++++++++++
 include/linux/phy.h                           |   4 +
 6 files changed, 250 insertions(+), 14 deletions(-)

-- 
2.26.2

[PATCH net-next v8 1/5] dt-bindings: net: Add tx and rx internal delays

[Dan Murphy]

tx-internal-delays and rx-internal-delays are a common setting for RGMII
capable devices.

These properties are used when the phy-mode or phy-controller is set to
rgmii-id, rgmii-rxid or rgmii-txid.  These modes indicate to the
controller that the PHY will add the internal delay for the connection.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/net/ethernet-phy.yaml       | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 9b1f1147ca36..7d8265eb49d6 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -162,6 +162,19 @@ properties:
     description:
       Specifies a reference to a node representing a SFP cage.
 
+
+  rx-internal-delay-ps:
+    description: |
+      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable RX internal delays.  If this property is
+      present then the PHY applies the RX delay.
+
+  tx-internal-delay-ps:
+    description: |
+      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable TX internal delays. If this property is
+      present then the PHY applies the TX delay.
+
 required:
   - reg
 
-- 
2.26.2

[PATCH net-next v8 2/5] net: phy: Add a helper to return the index for of the internal delay

[Dan Murphy]

Add a helper function that will return the index in the array for the
passed in internal delay value.  The helper requires the array, size and
delay value.

The helper will then return the index for the exact match or return the
index for the index to the closest smaller value.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v8 - I did a considerable amount of rework on this patch.  First the device_property
calls needed to be wrapped in IS_ENABLED (CONFIG_OF_MDIO).  Next if the PHY has
a fixed delay like the DP83822 with a bit to turn the delay on and off then
having a device tree property was a bit to much.  The device property should be
used for configurable delays.  If the PHY had a fixed delay then the PHY
interface type was good enough to tell the PHY to turn on the delay for the path.
This helper was tested on both the DP83869 and DP83822 devices.

 drivers/net/phy/phy_device.c | 100 +++++++++++++++++++++++++++++++++++
 include/linux/phy.h          |   4 ++
 2 files changed, 104 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 04946de74fa0..55f9953bcd1d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -31,6 +31,7 @@
 #include <linux/mdio.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/property.h>
 
 MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
@@ -2657,6 +2658,105 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
 }
 EXPORT_SYMBOL(phy_get_pause);
 
+#if IS_ENABLED(CONFIG_OF_MDIO)
+static int phy_get_int_delay_property(struct device *dev, const char *name)
+{
+	s32 int_delay;
+	int ret;
+
+	ret = device_property_read_u32(dev, name, &int_delay);
+	if (ret)
+		return ret;
+
+	return int_delay;
+}
+#else
+static inline int phy_get_int_delay_property(struct device *dev,
+					     const char *name)
+{
+	return -EINVAL
+}
+#endif
+
+/**
+ * phy_get_delay_index - returns the index of the internal delay
+ * @phydev: phy_device struct
+ * @dev: pointer to the devices device struct
+ * @delay_values: array of delays the PHY supports
+ * @size: the size of the delay array
+ * @is_rx: boolean to indicate to get the rx internal delay
+ *
+ * Returns the index within the array of internal delay passed in.
+ * If the device property is not present then the interface type is checked
+ * if the interface defines use of internal delay then a 1 is returned otherwise
+ * a 0 is returned.
+ * The array must be in ascending order. If PHY does not have an ascending order
+ * array then size = 0 and the value of the delay property is returned.
+ * Return -EINVAL if the delay is invalid or cannot be found.
+ */
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+			   const int *delay_values, int size, bool is_rx)
+{
+	int i;
+	s32 delay;
+
+	if (is_rx) {
+		delay = phy_get_int_delay_property(dev, "rx-internal-delay-ps");
+		if (delay < 0 && size == 0) {
+			if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+				return 1;
+			else
+				return 0;
+		}
+
+	} else {
+		delay = phy_get_int_delay_property(dev, "tx-internal-delay-ps");
+		if (delay < 0 && size == 0) {
+			if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+				return 1;
+			else
+				return 0;
+		}
+	}
+
+	if (delay < 0)
+		return delay;
+
+	if (delay && size == 0)
+		return delay;
+
+	if (delay < delay_values[0] || delay > delay_values[size - 1]) {
+		phydev_err(phydev, "Delay %d is out of range\n", delay);
+		return -EINVAL;
+	}
+
+	if (delay == delay_values[0])
+		return 0;
+
+	for (i = 1; i < size; i++) {
+		if (delay == delay_values[i])
+			return i;
+
+		/* Find an approximate index by looking up the table */
+		if (delay > delay_values[i - 1] &&
+		    delay < delay_values[i]) {
+			if (delay - delay_values[i - 1] <
+			    delay_values[i] - delay)
+				return i - 1;
+			else
+				return i;
+		}
+	}
+
+	phydev_err(phydev, "error finding internal delay index for %d\n",
+		   delay);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(phy_get_internal_delay);
+
 static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 {
 	return phydrv->config_intr && phydrv->ack_interrupt;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..917bfd422e06 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1430,6 +1430,10 @@ void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
 bool phy_validate_pause(struct phy_device *phydev,
 			struct ethtool_pauseparam *pp);
 void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
+
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+			   const int *delay_values, int size, bool is_rx);
+
 void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv,
 		       bool *tx_pause, bool *rx_pause);
 
-- 
2.26.2

Re: [PATCH net-next v8 2/5] net: phy: Add a helper to return the index for of the internal delay

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1526 bytes --]

Hi Dan,

I love your patch! Yet something to improve:

[auto build test ERROR on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
config: i386-defconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
reproduce (this is a W=1 build):
        # save the attached .config to linux build tree
        make W=1 ARCH=i386 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/net/phy/phy_device.c: In function 'phy_get_int_delay_property':
>> drivers/net/phy/phy_device.c:2678:1: error: expected ';' before '}' token
    2678 | }
         | ^

vim +2678 drivers/net/phy/phy_device.c

  2660	
  2661	#if IS_ENABLED(CONFIG_OF_MDIO)
  2662	static int phy_get_int_delay_property(struct device *dev, const char *name)
  2663	{
  2664		s32 int_delay;
  2665		int ret;
  2666	
  2667		ret = device_property_read_u32(dev, name, &int_delay);
  2668		if (ret)
  2669			return ret;
  2670	
  2671		return int_delay;
  2672	}
  2673	#else
  2674	static inline int phy_get_int_delay_property(struct device *dev,
  2675						     const char *name)
  2676	{
  2677		return -EINVAL
> 2678	}
  2679	#endif
  2680	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28707 bytes --]

Re: [PATCH net-next v8 2/5] net: phy: Add a helper to return the index for of the internal delay

[Dan Murphy]

Hello

On 6/18/20 6:29 PM, kernel test robot wrote:
> Hi Dan,
>
> I love your patch! Yet something to improve:
>
> [auto build test ERROR on net-next/master]
>
> url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
> config: i386-defconfig (attached as .config)
> compiler: gcc-9 (Debian 9.3.0-13) 9.3.0
> reproduce (this is a W=1 build):
>          # save the attached .config to linux build tree
>          make W=1 ARCH=i386
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>     drivers/net/phy/phy_device.c: In function 'phy_get_int_delay_property':
>>> drivers/net/phy/phy_device.c:2678:1: error: expected ';' before '}' token
>      2678 | }
>           | ^
>
> vim +2678 drivers/net/phy/phy_device.c
>
>    2660	
>    2661	#if IS_ENABLED(CONFIG_OF_MDIO)
>    2662	static int phy_get_int_delay_property(struct device *dev, const char *name)
>    2663	{
>    2664		s32 int_delay;
>    2665		int ret;
>    2666	
>    2667		ret = device_property_read_u32(dev, name, &int_delay);
>    2668		if (ret)
>    2669			return ret;
>    2670	
>    2671		return int_delay;
>    2672	}
>    2673	#else
>    2674	static inline int phy_get_int_delay_property(struct device *dev,
>    2675						     const char *name)
>    2676	{
>    2677		return -EINVAL

Ack missed compiling this use case.

Dan

>> 2678	}
>    2679	#endif
>    2680	
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

Re: [PATCH net-next v8 2/5] net: phy: Add a helper to return the index for of the internal delay

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1913 bytes --]

Hi Dan,

I love your patch! Yet something to improve:

[auto build test ERROR on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
config: x86_64-defconfig (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 487ca07fcc75d52755c9fe2ee05bcb3b6eeeec44)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install x86_64 cross compiling tool for clang build
        # apt-get install binutils-x86-64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/net/phy/phy_device.c:2677:16: error: expected ';' after return statement
           return -EINVAL
                         ^
                         ;
   1 error generated.

vim +2677 drivers/net/phy/phy_device.c

  2660	
  2661	#if IS_ENABLED(CONFIG_OF_MDIO)
  2662	static int phy_get_int_delay_property(struct device *dev, const char *name)
  2663	{
  2664		s32 int_delay;
  2665		int ret;
  2666	
  2667		ret = device_property_read_u32(dev, name, &int_delay);
  2668		if (ret)
  2669			return ret;
  2670	
  2671		return int_delay;
  2672	}
  2673	#else
  2674	static inline int phy_get_int_delay_property(struct device *dev,
  2675						     const char *name)
  2676	{
> 2677		return -EINVAL
  2678	}
  2679	#endif
  2680	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 29341 bytes --]

[PATCH net-next v8 3/5] dt-bindings: net: Add RGMII internal delay for DP83869

[Dan Murphy]

Add the internal delay values into the header and update the binding
with the internal delay properties.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 .../devicetree/bindings/net/ti,dp83869.yaml      | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index 5b69ef03bbf7..71e90a3e4652 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: TI DP83869 ethernet PHY
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: "ethernet-phy.yaml#"
 
 maintainers:
   - Dan Murphy <dmurphy@ti.com>
@@ -64,6 +64,18 @@ properties:
        Operational mode for the PHY.  If this is not set then the operational
        mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
 
+  rx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
+  tx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
 required:
   - reg
 
@@ -80,5 +92,7 @@ examples:
         ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
         ti,max-output-impedance = "true";
         ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+        rx-internal-delay-ps = <2000>;
+        tx-internal-delay-ps = <2000>;
       };
     };
-- 
2.26.2

[PATCH net-next v8 4/5] net: dp83869: Add RGMII internal delay configuration

[Dan Murphy]

Add RGMII internal delay configuration for Rx and Tx.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/net/phy/dp83869.c | 53 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index 53ed3abc26c9..21b7d3de14a9 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -64,6 +64,10 @@
 #define DP83869_RGMII_TX_CLK_DELAY_EN		BIT(1)
 #define DP83869_RGMII_RX_CLK_DELAY_EN		BIT(0)
 
+/* RGMIIDCTL */
+#define DP83869_RGMII_CLK_DELAY_SHIFT		4
+#define DP83869_CLK_DELAY_DEF			7
+
 /* STRAP_STS1 bits */
 #define DP83869_STRAP_OP_MODE_MASK		GENMASK(2, 0)
 #define DP83869_STRAP_STS1_RESERVED		BIT(11)
@@ -78,9 +82,6 @@
 #define DP83869_PHYCR_FIFO_DEPTH_MASK	GENMASK(15, 12)
 #define DP83869_PHYCR_RESERVED_MASK	BIT(11)
 
-/* RGMIIDCTL bits */
-#define DP83869_RGMII_TX_CLK_DELAY_SHIFT	4
-
 /* IO_MUX_CFG bits */
 #define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL	0x1f
 
@@ -99,6 +100,10 @@
 #define DP83869_OP_MODE_MII			BIT(5)
 #define DP83869_SGMII_RGMII_BRIDGE		BIT(6)
 
+static const int dp83869_internal_delay[] = {250, 500, 750, 1000, 1250, 1500,
+					     1750, 2000, 2250, 2500, 2750, 3000,
+					     3250, 3500, 3750, 4000};
+
 enum {
 	DP83869_PORT_MIRRORING_KEEP,
 	DP83869_PORT_MIRRORING_EN,
@@ -108,6 +113,8 @@ enum {
 struct dp83869_private {
 	int tx_fifo_depth;
 	int rx_fifo_depth;
+	s32 rx_int_delay;
+	s32 tx_int_delay;
 	int io_impedance;
 	int port_mirroring;
 	bool rxctrl_strap_quirk;
@@ -182,6 +189,7 @@ static int dp83869_of_init(struct phy_device *phydev)
 	struct dp83869_private *dp83869 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
+	int delay_size = ARRAY_SIZE(dp83869_internal_delay);
 	int ret;
 
 	if (!of_node)
@@ -235,6 +243,20 @@ static int dp83869_of_init(struct phy_device *phydev)
 				 &dp83869->tx_fifo_depth))
 		dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
 
+	dp83869->rx_int_delay = phy_get_internal_delay(phydev, dev,
+						       &dp83869_internal_delay[0],
+						       delay_size, true);
+	if (dp83869->rx_int_delay < 0)
+		dp83869->rx_int_delay =
+				dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
+
+	dp83869->tx_int_delay = phy_get_internal_delay(phydev, dev,
+						       &dp83869_internal_delay[0],
+						       delay_size, false);
+	if (dp83869->tx_int_delay < 0)
+		dp83869->tx_int_delay =
+				dp83869_internal_delay[DP83869_CLK_DELAY_DEF];
+
 	return ret;
 }
 #else
@@ -397,6 +419,31 @@ static int dp83869_config_init(struct phy_device *phydev)
 				     dp83869->clk_output_sel <<
 				     DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
 
+	if (phy_interface_is_rgmii(phydev)) {
+		ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIIDCTL,
+				    dp83869->rx_int_delay |
+			dp83869->tx_int_delay << DP83869_RGMII_CLK_DELAY_SHIFT);
+		if (ret)
+			return ret;
+
+		val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL);
+		val &= ~(DP83869_RGMII_TX_CLK_DELAY_EN |
+			 DP83869_RGMII_RX_CLK_DELAY_EN);
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			val |= (DP83869_RGMII_TX_CLK_DELAY_EN |
+				DP83869_RGMII_RX_CLK_DELAY_EN);
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+			val |= DP83869_RGMII_TX_CLK_DELAY_EN;
+
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+			val |= DP83869_RGMII_RX_CLK_DELAY_EN;
+
+		ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_RGMIICTL,
+				    val);
+	}
+
 	return ret;
 }
 
-- 
2.26.2

Re: [PATCH net-next v8 4/5] net: dp83869: Add RGMII internal delay configuration

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 7249 bytes --]

Hi Dan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
config: s390-randconfig-r014-20200618 (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 487ca07fcc75d52755c9fe2ee05bcb3b6eeeec44)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install s390 cross compiling tool for clang build
        # apt-get install binutils-s390-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=s390 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>, old ones prefixed by <<):

#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
^
include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
___constant_swab32(x) :                                               ^
include/uapi/linux/swab.h:20:12: note: expanded from macro '___constant_swab32'
(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |                                 ^
In file included from drivers/net/phy/dp83869.c:6:
In file included from include/linux/ethtool.h:18:
In file included from include/uapi/linux/ethtool.h:19:
In file included from include/linux/if_ether.h:19:
In file included from include/linux/skbuff.h:31:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/s390/include/asm/io.h:72:
include/asm-generic/io.h:492:45: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu(__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
^
include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
___constant_swab32(x) :                                               ^
include/uapi/linux/swab.h:21:12: note: expanded from macro '___constant_swab32'
(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |                                 ^
In file included from drivers/net/phy/dp83869.c:6:
In file included from include/linux/ethtool.h:18:
In file included from include/uapi/linux/ethtool.h:19:
In file included from include/linux/if_ether.h:19:
In file included from include/linux/skbuff.h:31:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/s390/include/asm/io.h:72:
include/asm-generic/io.h:492:45: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu(__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
^
include/uapi/linux/swab.h:119:21: note: expanded from macro '__swab32'
___constant_swab32(x) :                                               ^
include/uapi/linux/swab.h:22:12: note: expanded from macro '___constant_swab32'
(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
^
In file included from drivers/net/phy/dp83869.c:6:
In file included from include/linux/ethtool.h:18:
In file included from include/uapi/linux/ethtool.h:19:
In file included from include/linux/if_ether.h:19:
In file included from include/linux/skbuff.h:31:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/s390/include/asm/io.h:72:
include/asm-generic/io.h:492:45: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
val = __le32_to_cpu(__raw_readl(PCI_IOBASE + addr));
~~~~~~~~~~ ^
include/uapi/linux/byteorder/big_endian.h:34:59: note: expanded from macro '__le32_to_cpu'
#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
^
include/uapi/linux/swab.h:120:12: note: expanded from macro '__swab32'
__fswab32(x))
^
In file included from drivers/net/phy/dp83869.c:6:
In file included from include/linux/ethtool.h:18:
In file included from include/uapi/linux/ethtool.h:19:
In file included from include/linux/if_ether.h:19:
In file included from include/linux/skbuff.h:31:
In file included from include/linux/dma-mapping.h:11:
In file included from include/linux/scatterlist.h:9:
In file included from arch/s390/include/asm/io.h:72:
include/asm-generic/io.h:503:33: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writeb(value, PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:513:46: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writew(cpu_to_le16(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:523:46: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
__raw_writel(cpu_to_le32(value), PCI_IOBASE + addr);
~~~~~~~~~~ ^
include/asm-generic/io.h:585:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsb(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:593:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsw(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:601:20: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
readsl(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:610:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesb(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:619:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesw(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
include/asm-generic/io.h:628:21: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
writesl(PCI_IOBASE + addr, buffer, count);
~~~~~~~~~~ ^
>> drivers/net/phy/dp83869.c:103:18: warning: unused variable 'dp83869_internal_delay' [-Wunused-const-variable]
static const int dp83869_internal_delay[] = {250, 500, 750, 1000, 1250, 1500,
^
21 warnings generated.

vim +/dp83869_internal_delay +103 drivers/net/phy/dp83869.c

   102	
 > 103	static const int dp83869_internal_delay[] = {250, 500, 750, 1000, 1250, 1500,
   104						     1750, 2000, 2250, 2500, 2750, 3000,
   105						     3250, 3500, 3750, 4000};
   106	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 23458 bytes --]

[PATCH net-next v8 5/5] net: phy: DP83822: Add setting the fixed internal delay

[Dan Murphy]

The DP83822 can be configured to use the RGMII interface. There are
independent fixed 3.5ns clock shift (aka internal delay) for the TX and RX
paths. This allow either one to be set if the MII interface is RGMII and
the value is set in the firmware node.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/net/phy/dp83822.c | 78 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 68 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 1dd19d0cb269..0fe91119d57f 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -26,7 +26,9 @@
 #define MII_DP83822_PHYSCR	0x11
 #define MII_DP83822_MISR1	0x12
 #define MII_DP83822_MISR2	0x13
+#define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
+#define MII_DP83822_GENCFG	0x465
 
 #define DP83822_HW_RESET	BIT(15)
 #define DP83822_SW_RESET	BIT(14)
@@ -77,6 +79,10 @@
 #define DP83822_WOL_INDICATION_SEL BIT(8)
 #define DP83822_WOL_CLR_INDICATION BIT(11)
 
+/* RSCR bits */
+#define DP83822_RX_CLK_SHIFT	BIT(12)
+#define DP83822_TX_CLK_SHIFT	BIT(11)
+
 static int dp83822_ack_interrupt(struct phy_device *phydev)
 {
 	int err;
@@ -255,7 +261,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
 }
 
-static int dp83822_config_init(struct phy_device *phydev)
+static int dp8382x_disable_wol(struct phy_device *phydev)
 {
 	int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
 		    DP83822_WOL_SECURE_ON;
@@ -264,6 +270,45 @@ static int dp83822_config_init(struct phy_device *phydev)
 				  MII_DP83822_WOL_CFG, value);
 }
 
+static int dp83822_config_init(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	int rgmii_delay;
+	s32 rx_int_delay;
+	s32 tx_int_delay;
+	int err = 0;
+
+	if (phy_interface_is_rgmii(phydev)) {
+		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      true);
+		if (rx_int_delay <= 0)
+			rx_int_delay = 0;
+		else
+			rgmii_delay = DP83822_RX_CLK_SHIFT;
+
+		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      false);
+		if (tx_int_delay <= 0)
+			tx_int_delay = 0;
+		else
+			rgmii_delay |= DP83822_TX_CLK_SHIFT;
+
+		if (rgmii_delay) {
+			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					       MII_DP83822_RCSR, rgmii_delay);
+			if (err)
+				return err;
+		}
+	}
+
+	return dp8382x_disable_wol(phydev);
+}
+
+static int dp8382x_config_init(struct phy_device *phydev)
+{
+	return dp8382x_disable_wol(phydev);
+}
+
 static int dp83822_phy_reset(struct phy_device *phydev)
 {
 	int err;
@@ -272,9 +317,7 @@ static int dp83822_phy_reset(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	dp83822_config_init(phydev);
-
-	return 0;
+	return phydev->drv->config_init(phydev);
 }
 
 static int dp83822_suspend(struct phy_device *phydev)
@@ -318,14 +361,29 @@ static int dp83822_resume(struct phy_device *phydev)
 		.resume = dp83822_resume,			\
 	}
 
+#define DP8382X_PHY_DRIVER(_id, _name)				\
+	{							\
+		PHY_ID_MATCH_MODEL(_id),			\
+		.name		= (_name),			\
+		/* PHY_BASIC_FEATURES */			\
+		.soft_reset	= dp83822_phy_reset,		\
+		.config_init	= dp8382x_config_init,		\
+		.get_wol = dp83822_get_wol,			\
+		.set_wol = dp83822_set_wol,			\
+		.ack_interrupt = dp83822_ack_interrupt,		\
+		.config_intr = dp83822_config_intr,		\
+		.suspend = dp83822_suspend,			\
+		.resume = dp83822_resume,			\
+	}
+
 static struct phy_driver dp83822_driver[] = {
 	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
-	DP83822_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
-	DP83822_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
-	DP83822_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
-	DP83822_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
-	DP83822_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
-	DP83822_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
+	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
+	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
+	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
+	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
+	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
+	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
 };
 module_phy_driver(dp83822_driver);
 
-- 
2.26.2

Re: [PATCH net-next v8 5/5] net: phy: DP83822: Add setting the fixed internal delay

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2816 bytes --]

Hi Dan,

I love your patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]

url:    https://github.com/0day-ci/linux/commits/Dan-Murphy/RGMII-Internal-delay-common-property/20200619-051238
base:   https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git cb8e59cc87201af93dfbb6c3dccc8fcad72a09c2
config: x86_64-allyesconfig (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 487ca07fcc75d52755c9fe2ee05bcb3b6eeeec44)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install x86_64 cross compiling tool for clang build
        # apt-get install binutils-x86-64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>, old ones prefixed by <<):

>> drivers/net/phy/dp83822.c:284:7: warning: variable 'rgmii_delay' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (rx_int_delay <= 0)
^~~~~~~~~~~~~~~~~
drivers/net/phy/dp83822.c:296:7: note: uninitialized use occurs here
if (rgmii_delay) {
^~~~~~~~~~~
drivers/net/phy/dp83822.c:284:3: note: remove the 'if' if its condition is always false
if (rx_int_delay <= 0)
^~~~~~~~~~~~~~~~~~~~~~
drivers/net/phy/dp83822.c:276:17: note: initialize the variable 'rgmii_delay' to silence this warning
int rgmii_delay;
^
= 0
1 warning generated.

vim +284 drivers/net/phy/dp83822.c

   272	
   273	static int dp83822_config_init(struct phy_device *phydev)
   274	{
   275		struct device *dev = &phydev->mdio.dev;
   276		int rgmii_delay;
   277		s32 rx_int_delay;
   278		s32 tx_int_delay;
   279		int err = 0;
   280	
   281		if (phy_interface_is_rgmii(phydev)) {
   282			rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
   283							      true);
 > 284			if (rx_int_delay <= 0)
   285				rx_int_delay = 0;
   286			else
   287				rgmii_delay = DP83822_RX_CLK_SHIFT;
   288	
   289			tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
   290							      false);
   291			if (tx_int_delay <= 0)
   292				tx_int_delay = 0;
   293			else
   294				rgmii_delay |= DP83822_TX_CLK_SHIFT;
   295	
   296			if (rgmii_delay) {
   297				err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
   298						       MII_DP83822_RCSR, rgmii_delay);
   299				if (err)
   300					return err;
   301			}
   302		}
   303	
   304		return dp8382x_disable_wol(phydev);
   305	}
   306	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 74440 bytes --]