[PATCH v5 0/4] Qualcomm labibb regulator driver

[PATCH v5 0/4] Qualcomm labibb regulator driver

[Sumit Semwal]

This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs.
These regulators provide positive and/or negative boost power supplies
for LCD/LED display panels connected to the SoC.

This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs.

Changes from v4:
- v4 Review comments incorporated
  - simplified the driver: removed of_get_child_by_name(); use ENABLE_CTL
    register and switch over to use the regulator_*_regmap helpers
  - improved kerneldoc
  - From the dt-bindings, removed interrupt-names, changed to dual license,
    added unevaluatedProperties: false, removed interrupt-names, since there
    is only one interrupt per node
  - Since the Short Circuit handling needs more details from QC engineers,
    drop the SC handling patch from this series, to submit it later

Changes from v3:
- Handled review comments from v3
- In core, swapped the meaning of enable_time and poll_enabled_time; so we
   wait for total enable_time delay, and poll in-between at poll_enabled_time
   interval now.
- fixed dt_bindings_check issues in dt-bindings patch.
- Cleanup of register_labibb_regulator(), and adapted to updated meaning of
   poll_enabled_time.

Changes from v2:
- Review comments from v2
- Moved the poll-to-check-enabled functionality to regulator core.
- Used more core features to simplify enable/disable functions.
- Moved the devicetree binding to yaml.
- Updated interrupt-names and simplified handling.

Changes from v1:
- Incorporated review comments from v1
- Changed from virtual-regulator based handling to individual regulator based
  handling.
- Reworked the core to merge most of enable/disable functions, combine the
  regulator_ops into one and allow for future variations.
- is_enabled() is now _really_ is_enabled()
- Simplified the SC interrupt handling - use regmap_read_poll_timeout,
  REGULATOR_EVENT_OVER_CURRENT handling and notification to clients.

Nisha Kumari (3):
  dt-bindings: regulator: Add labibb regulator
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  regulator: qcom: Add labibb driver

Sumit Semwal (1):
  regulator: Allow regulators to verify enabled during enable()

 .../regulator/qcom-labibb-regulator.yaml      |  70 +++++++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi         |  12 ++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/core.c                      |  63 ++++++-
 drivers/regulator/qcom-labibb-regulator.c     | 175 ++++++++++++++++++
 include/linux/regulator/driver.h              |   5 +
 7 files changed, 335 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c

-- 
2.27.0

[PATCH v5 1/4] regulator: Allow regulators to verify enabled during enable()

[Sumit Semwal]

Some regulators might need to verify that they have indeed been enabled
after the enable() call is made and enable_time delay has passed.

This is implemented by repeatedly checking is_enabled() upto
poll_enabled_time, waiting for the already calculated enable delay in
each iteration.

Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

---
v3: addressed minor review comments, improved kernel doc
v2: Address review comments, including swapping enable_time and poll_enabled_time.
---
 drivers/regulator/core.c         | 63 +++++++++++++++++++++++++++++++-
 include/linux/regulator/driver.h |  5 +++
 2 files changed, 67 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 03154f5b939f..538a2779986a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2347,6 +2347,37 @@ static void _regulator_enable_delay(unsigned int delay)
 		udelay(us);
 }
 
+/**
+ * _regulator_check_status_enabled
+ *
+ * A helper function to check if the regulator status can be interpreted
+ * as 'regulator is enabled'.
+ * @rdev: the regulator device to check
+ *
+ * Return:
+ * * 1			- if status shows regulator is in enabled state
+ * * 0			- if not enabled state
+ * * Error Value	- as received from ops->get_status()
+ */
+static inline int _regulator_check_status_enabled(struct regulator_dev *rdev)
+{
+	int ret = rdev->desc->ops->get_status(rdev);
+
+	if (ret < 0) {
+		rdev_info(rdev, "get_status returned error: %d\n", ret);
+		return ret;
+	}
+
+	switch (ret) {
+	case REGULATOR_STATUS_OFF:
+	case REGULATOR_STATUS_ERROR:
+	case REGULATOR_STATUS_UNDEFINED:
+		return 0;
+	default:
+		return 1;
+	}
+}
+
 static int _regulator_do_enable(struct regulator_dev *rdev)
 {
 	int ret, delay;
@@ -2407,7 +2438,37 @@ static int _regulator_do_enable(struct regulator_dev *rdev)
 	 * together.  */
 	trace_regulator_enable_delay(rdev_get_name(rdev));
 
-	_regulator_enable_delay(delay);
+	/* If poll_enabled_time is set, poll upto the delay calculated
+	 * above, delaying poll_enabled_time uS to check if the regulator
+	 * actually got enabled.
+	 * If the regulator isn't enabled after enable_delay has
+	 * expired, return -ETIMEDOUT.
+	 */
+	if (rdev->desc->poll_enabled_time) {
+		unsigned int time_remaining = delay;
+
+		while (time_remaining > 0) {
+			_regulator_enable_delay(rdev->desc->poll_enabled_time);
+
+			if (rdev->desc->ops->get_status) {
+				ret = _regulator_check_status_enabled(rdev);
+				if (ret < 0)
+					return ret;
+				else if (ret)
+					break;
+			} else if (rdev->desc->ops->is_enabled(rdev))
+				break;
+
+			time_remaining -= rdev->desc->poll_enabled_time;
+		}
+
+		if (time_remaining <= 0) {
+			rdev_err(rdev, "Enabled check timed out\n");
+			return -ETIMEDOUT;
+		}
+	} else {
+		_regulator_enable_delay(delay);
+	}
 
 	trace_regulator_enable_complete(rdev_get_name(rdev));
 
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 7eb9fea8e482..436df3ba0b2a 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -305,6 +305,9 @@ enum regulator_type {
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
  *
+ * @poll_enabled_time: The polling interval (in uS) to use while checking that
+ *                     the regulator was actually enabled. Max upto enable_time.
+ *
  * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
  */
 struct regulator_desc {
@@ -372,6 +375,8 @@ struct regulator_desc {
 
 	unsigned int off_on_delay;
 
+	unsigned int poll_enabled_time;
+
 	unsigned int (*of_map_mode)(unsigned int mode);
 };
 
-- 
2.27.0

[PATCH v5 2/4] dt-bindings: regulator: Add labibb regulator

[Sumit Semwal]

From: Nisha Kumari <nishakumari@codeaurora.org>

Adding the devicetree binding for labibb regulator.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: cleanup as per review comments and update to yaml]

---
v5: Addressed review comments - removed interrupt-names, changed to
     dual license, added unevaluatedProperties: false
v4: fixed dt_binding_check issues
v3: moved to yaml
v2: updated for better compatible string and names.
---
 .../regulator/qcom-labibb-regulator.yaml      | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
new file mode 100644
index 000000000000..085cbd1ad8d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description:
+  LAB can be used as a positive boost power supply and IBB can be used as a
+  negative boost power supply for display panels. Currently implemented for
+  pmi8998.
+
+properties:
+  compatible:
+    const: qcom,pmi8998-lab-ibb
+
+  lab:
+    type: object
+
+    properties:
+
+      interrupts:
+        maxItems: 1
+        description:
+          Short-circuit interrupt for lab.
+
+    required:
+    - interrupts
+
+  ibb:
+    type: object
+
+    properties:
+
+      interrupts:
+        maxItems: 1
+        description:
+          Short-circuit interrupt for lab.
+
+    required:
+    - interrupts
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    labibb {
+      compatible = "qcom,pmi8998-lab-ibb";
+
+      lab {
+        interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "sc-err";
+      };
+
+      ibb {
+        interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "sc-err";
+      };
+    };
+
+...
-- 
2.27.0

Re: [PATCH v5 2/4] dt-bindings: regulator: Add labibb regulator

[Rob Herring]

On Mon, 22 Jun 2020 18:11:08 +0530, Sumit Semwal wrote:
> From: Nisha Kumari <nishakumari@codeaurora.org>
> 
> Adding the devicetree binding for labibb regulator.
> 
> Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
>  [sumits: cleanup as per review comments and update to yaml]
> 
> ---
> v5: Addressed review comments - removed interrupt-names, changed to
>      dual license, added unevaluatedProperties: false
> v4: fixed dt_binding_check issues
> v3: moved to yaml
> v2: updated for better compatible string and names.
> ---
>  .../regulator/qcom-labibb-regulator.yaml      | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v5 3/4] arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators

[Sumit Semwal]

From: Nisha Kumari <nishakumari@codeaurora.org>

This patch adds devicetree nodes for LAB and IBB regulators.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: Updated for better compatible strings and names]

---
v5: sumits: removed interrupt-names, since there is only one
            interrupt per node
v4: sumits: removed labibb label which is not needed
v3: sumits: updated interrupt-names as per review comments
v2: sumits: updated for better compatible string and names
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..d016b12967eb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,17 @@ pmi8998_lsid1: pmic@3 {
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
 	};
 };
-- 
2.27.0

[PATCH v5 4/4] regulator: qcom: Add labibb driver

[Sumit Semwal]

From: Nisha Kumari <nishakumari@codeaurora.org>

Qualcomm platforms have LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost)
regulators, labibb for short, which are used as power supply for
LCD Mode displays.

This patch adds labibb regulator driver for pmi8998 PMIC, found on
SDM845 platforms.

Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org>
  [sumits: reworked the driver design as per upstream review]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>

---
v5: sumits: review comments addressed
     - removed dev_info about registering
     - removed of_get_child_by_name()
     - changed from using STATUS1 register to using ENABLE_CTL; this
       allows us to use the regulator_*_regmap helpers and makes this
       code cleaner. (In limited testing, STATUS1 seemed to report the
       change faster than ENABLE_CTL, but in absence of mechanism to
       validate if the regulator has indeed fully ramped when STATUS1
       starts flagging, broonie suggested to use the slower ENABLE_CTL
       path for safety).
v4: sumits: address review comments from v3, including cleaning up
     register_labibb_regulator(), and adapted to updated meaning of
     poll_enabled_time.
v3: sumits: addressed review comments from v2; moved to use core
     regulator features like enable_time, off_on_delay, and the newly
     added poll_enabled_time. Moved the check_enabled functionality
     to core framework via poll_enabled_time.
v2: sumits: reworked the driver for more common code, and addressed
     review comments from v1
---
 drivers/regulator/Kconfig                 |  10 ++
 drivers/regulator/Makefile                |   1 +
 drivers/regulator/qcom-labibb-regulator.c | 175 ++++++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8f677f5d79b4..c6377df023bc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1178,5 +1178,15 @@ config REGULATOR_WM8994
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
+config REGULATOR_QCOM_LABIBB
+	tristate "QCOM LAB/IBB regulator support"
+	depends on SPMI || COMPILE_TEST
+	help
+	  This driver supports Qualcomm's LAB/IBB regulators present on the
+	  Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
+	  based PMIC implementations. LAB can be used as positive
+	  boost regulator and IBB can be used as a negative boost regulator
+	  for LCD display panel.
+
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index e8f163371071..2c2b0861df76 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
new file mode 100644
index 000000000000..8c7dd1928380
--- /dev/null
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define REG_PERPH_TYPE                  0x04
+
+#define QCOM_LAB_TYPE			0x24
+#define QCOM_IBB_TYPE			0x20
+
+#define PMI8998_LAB_REG_BASE		0xde00
+#define PMI8998_IBB_REG_BASE		0xdc00
+
+#define REG_LABIBB_STATUS1		0x08
+#define REG_LABIBB_ENABLE_CTL		0x46
+#define LABIBB_STATUS1_VREG_OK_BIT	BIT(7)
+#define LABIBB_CONTROL_ENABLE		BIT(7)
+
+#define LAB_ENABLE_CTL_MASK		BIT(7)
+#define IBB_ENABLE_CTL_MASK		(BIT(7) | BIT(6))
+
+#define LABIBB_OFF_ON_DELAY		1000
+#define LAB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 2)
+#define IBB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 10)
+#define LABIBB_POLL_ENABLED_TIME	1000
+
+struct labibb_regulator {
+	struct regulator_desc		desc;
+	struct device			*dev;
+	struct regmap			*regmap;
+	struct regulator_dev		*rdev;
+	u16				base;
+	u8				type;
+};
+
+struct labibb_regulator_data {
+	const char			*name;
+	u8				type;
+	u16				base;
+	struct regulator_desc		*desc;
+};
+
+static struct regulator_ops qcom_labibb_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc pmi8998_lab_desc = {
+	.enable_mask		= LAB_ENABLE_CTL_MASK,
+	.enable_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+	.enable_val		= LABIBB_CONTROL_ENABLE,
+	.enable_time		= LAB_ENABLE_TIME,
+	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.off_on_delay		= LABIBB_OFF_ON_DELAY,
+	.owner			= THIS_MODULE,
+	.type			= REGULATOR_VOLTAGE,
+	.ops			= &qcom_labibb_ops,
+};
+
+static struct regulator_desc pmi8998_ibb_desc = {
+	.enable_mask		= IBB_ENABLE_CTL_MASK,
+	.enable_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
+	.enable_val		= LABIBB_CONTROL_ENABLE,
+	.enable_time		= IBB_ENABLE_TIME,
+	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.off_on_delay		= LABIBB_OFF_ON_DELAY,
+	.owner			= THIS_MODULE,
+	.type			= REGULATOR_VOLTAGE,
+	.ops			= &qcom_labibb_ops,
+};
+
+static const struct labibb_regulator_data pmi8998_labibb_data[] = {
+	{"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
+	{"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
+	{ },
+};
+
+static const struct of_device_id qcom_labibb_match[] = {
+	{ .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_labibb_match);
+
+static int qcom_labibb_regulator_probe(struct platform_device *pdev)
+{
+	struct labibb_regulator *vreg;
+	struct device *dev = &pdev->dev;
+	struct regulator_config cfg = {};
+
+	const struct of_device_id *match;
+	const struct labibb_regulator_data *reg_data;
+	struct regmap *reg_regmap;
+	unsigned int type;
+	int ret;
+
+	reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!reg_regmap) {
+		dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
+		return -ENODEV;
+	}
+
+	match = of_match_device(qcom_labibb_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	for (reg_data = match->data; reg_data->name; reg_data++) {
+
+		/* Validate if the type of regulator is indeed
+		 * what's mentioned in DT.
+		 */
+		ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
+				  &type);
+		if (ret < 0) {
+			dev_err(dev,
+				"Peripheral type read failed ret=%d\n",
+				ret);
+			return -EINVAL;
+		}
+
+		if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
+		    WARN_ON(type != reg_data->type))
+			return -EINVAL;
+
+		vreg  = devm_kzalloc(&pdev->dev, sizeof(*vreg),
+					   GFP_KERNEL);
+		if (!vreg)
+			return -ENOMEM;
+
+		vreg->regmap = reg_regmap;
+		vreg->dev = dev;
+		vreg->base = reg_data->base;
+		vreg->type = reg_data->type;
+
+		memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
+		vreg->desc.of_match = reg_data->name;
+		vreg->desc.name = reg_data->name;
+
+		cfg.dev = vreg->dev;
+		cfg.driver_data = vreg;
+		cfg.regmap = vreg->regmap;
+
+		vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
+							&cfg);
+
+		if (IS_ERR(vreg->rdev)) {
+			dev_err(dev, "qcom_labibb: error registering %s : %d\n",
+					reg_data->name, ret);
+			return PTR_ERR(vreg->rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver qcom_labibb_regulator_driver = {
+	.driver	= {
+		.name = "qcom-lab-ibb-regulator",
+		.of_match_table	= qcom_labibb_match,
+	},
+	.probe = qcom_labibb_regulator_probe,
+};
+module_platform_driver(qcom_labibb_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm labibb driver");
+MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>");
+MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
+MODULE_LICENSE("GPL v2");
-- 
2.27.0

Re: [PATCH v5 0/4] Qualcomm labibb regulator driver

[Mark Brown]

On Mon, 22 Jun 2020 18:11:06 +0530, Sumit Semwal wrote:
> This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs.
> These regulators provide positive and/or negative boost power supplies
> for LCD/LED display panels connected to the SoC.
> 
> This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs.
> 
> Changes from v4:
> - v4 Review comments incorporated
>   - simplified the driver: removed of_get_child_by_name(); use ENABLE_CTL
>     register and switch over to use the regulator_*_regmap helpers
>   - improved kerneldoc
>   - From the dt-bindings, removed interrupt-names, changed to dual license,
>     added unevaluatedProperties: false, removed interrupt-names, since there
>     is only one interrupt per node
>   - Since the Short Circuit handling needs more details from QC engineers,
>     drop the SC handling patch from this series, to submit it later
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/3] regulator: Allow regulators to verify enabled during enable()
      commit: f7d7ad42a9dc2d63cab6a79fe31e6732a30dacf5
[2/3] regulator: Add labibb regulator binding
      commit: 88c14de2b6786ef503fd1bc2c952159e65fe45cc
[3/3] regulator: qcom: Add labibb driver
      commit: 498ab2fdf8554690c9567c1eee436b858637e3ff

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark