* [PATCH] iio: light: stk3310: add chip id for STK3311-X variant @ 2020-07-03 19:44 Ondrej Jirman 2020-07-04 16:29 ` Jonathan Cameron 0 siblings, 1 reply; 6+ messages in thread From: Ondrej Jirman @ 2020-07-03 19:44 UTC (permalink / raw) To: linux-kernel Cc: Icenowy Zheng, Ondrej Jirman, Jonathan Cameron, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS From: Icenowy Zheng <icenowy@aosc.io> The STK3311 chip has a variant called STK3311-X, which has a different chip id of 0x12. Add the chip id to the driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Ondrej Jirman <megous@megous.com> --- drivers/iio/light/stk3310.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index 185c24a75ae6..1a8401d198a4 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -37,6 +37,7 @@ #define STK3310_CHIP_ID_VAL 0x13 #define STK3311_CHIP_ID_VAL 0x1D +#define STK3311X_CHIP_ID_VAL 0x12 #define STK3335_CHIP_ID_VAL 0x51 #define STK3310_PSINT_EN 0x01 #define STK3310_PS_MAX_VAL 0xFFFF @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev *indio_dev) if (chipid != STK3310_CHIP_ID_VAL && chipid != STK3311_CHIP_ID_VAL && + chipid != STK3311X_CHIP_ID_VAL && chipid != STK3335_CHIP_ID_VAL) { dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid); return -ENODEV; -- 2.27.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] iio: light: stk3310: add chip id for STK3311-X variant 2020-07-03 19:44 [PATCH] iio: light: stk3310: add chip id for STK3311-X variant Ondrej Jirman @ 2020-07-04 16:29 ` Jonathan Cameron 2020-07-04 17:09 ` Icenowy Zheng 2020-07-14 10:44 ` Ondřej Jirman 0 siblings, 2 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-07-04 16:29 UTC (permalink / raw) To: Ondrej Jirman Cc: linux-kernel, Icenowy Zheng, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS On Fri, 3 Jul 2020 21:44:05 +0200 Ondrej Jirman <megous@megous.com> wrote: > From: Icenowy Zheng <icenowy@aosc.io> > > The STK3311 chip has a variant called STK3311-X, which has a different > chip id of 0x12. > > Add the chip id to the driver. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > Signed-off-by: Ondrej Jirman <megous@megous.com> Given this is clearly not quite compatible with the stk3311 probably best to also add a an id to the of id table. Any idea what else is different? Thanks, Jonathan > --- > drivers/iio/light/stk3310.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c > index 185c24a75ae6..1a8401d198a4 100644 > --- a/drivers/iio/light/stk3310.c > +++ b/drivers/iio/light/stk3310.c > @@ -37,6 +37,7 @@ > > #define STK3310_CHIP_ID_VAL 0x13 > #define STK3311_CHIP_ID_VAL 0x1D > +#define STK3311X_CHIP_ID_VAL 0x12 > #define STK3335_CHIP_ID_VAL 0x51 > #define STK3310_PSINT_EN 0x01 > #define STK3310_PS_MAX_VAL 0xFFFF > @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev *indio_dev) > > if (chipid != STK3310_CHIP_ID_VAL && > chipid != STK3311_CHIP_ID_VAL && > + chipid != STK3311X_CHIP_ID_VAL && > chipid != STK3335_CHIP_ID_VAL) { > dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid); > return -ENODEV; ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] iio: light: stk3310: add chip id for STK3311-X variant 2020-07-04 16:29 ` Jonathan Cameron @ 2020-07-04 17:09 ` Icenowy Zheng 2020-07-04 17:49 ` Ondřej Jirman 2020-07-14 10:44 ` Ondřej Jirman 1 sibling, 1 reply; 6+ messages in thread From: Icenowy Zheng @ 2020-07-04 17:09 UTC (permalink / raw) To: Jonathan Cameron, Ondrej Jirman Cc: linux-kernel, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS 在 2020-07-04星期六的 17:29 +0100,Jonathan Cameron写道: > On Fri, 3 Jul 2020 21:44:05 +0200 > Ondrej Jirman <megous@megous.com> wrote: > > > From: Icenowy Zheng <icenowy@aosc.io> > > > > The STK3311 chip has a variant called STK3311-X, which has a > > different > > chip id of 0x12. > > > > Add the chip id to the driver. > > > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > Signed-off-by: Ondrej Jirman <megous@megous.com> > > Given this is clearly not quite compatible with the stk3311 probably > best to also add a an id to the of id table. Any idea what else > is different? By the way, STK3311 seems to have many variants lying around, and all of them have different IDs. The pinouts seem to be different but the registers are compatible. [1] is a datasheet of STK3311-S34 with ID 0x1e. [2] is a datasheet of STK3311-A with ID 0x15. I cannot find the datasheet of STK3311-X, 0x12 is read from the device. The model number itself is mentioned at [3], the official website of sensortek. [1] http://pro0fc108.hkpic1.websiteonline.cn/upload/STK3311-S34Datasheetv1.pdf [2] http://pro0fc108.hkpic1.websiteonline.cn/upload/STK3311-ADatasheetv1.pdf [3] http://www.sensortek.com.tw/index.php/en/products/proximity-sensor-with-als/ > > Thanks, > > Jonathan > > > --- > > drivers/iio/light/stk3310.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/iio/light/stk3310.c > > b/drivers/iio/light/stk3310.c > > index 185c24a75ae6..1a8401d198a4 100644 > > --- a/drivers/iio/light/stk3310.c > > +++ b/drivers/iio/light/stk3310.c > > @@ -37,6 +37,7 @@ > > > > #define STK3310_CHIP_ID_VAL 0x13 > > #define STK3311_CHIP_ID_VAL 0x1D > > +#define STK3311X_CHIP_ID_VAL 0x12 > > #define STK3335_CHIP_ID_VAL 0x51 > > #define STK3310_PSINT_EN 0x01 > > #define STK3310_PS_MAX_VAL 0xFFFF > > @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev > > *indio_dev) > > > > if (chipid != STK3310_CHIP_ID_VAL && > > chipid != STK3311_CHIP_ID_VAL && > > + chipid != STK3311X_CHIP_ID_VAL && > > chipid != STK3335_CHIP_ID_VAL) { > > dev_err(&client->dev, "invalid chip id: 0x%x\n", > > chipid); > > return -ENODEV; ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] iio: light: stk3310: add chip id for STK3311-X variant 2020-07-04 17:09 ` Icenowy Zheng @ 2020-07-04 17:49 ` Ondřej Jirman 0 siblings, 0 replies; 6+ messages in thread From: Ondřej Jirman @ 2020-07-04 17:49 UTC (permalink / raw) To: Icenowy Zheng Cc: Jonathan Cameron, linux-kernel, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS Hi, On Sun, Jul 05, 2020 at 01:09:37AM +0800, Icenowy Zheng wrote: > 在 2020-07-04星期六的 17:29 +0100,Jonathan Cameron写道: > > On Fri, 3 Jul 2020 21:44:05 +0200 > > Ondrej Jirman <megous@megous.com> wrote: > > > > > From: Icenowy Zheng <icenowy@aosc.io> > > > > > > The STK3311 chip has a variant called STK3311-X, which has a > > > different > > > chip id of 0x12. > > > > > > Add the chip id to the driver. > > > > > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > > Signed-off-by: Ondrej Jirman <megous@megous.com> > > > > Given this is clearly not quite compatible with the stk3311 probably > > best to also add a an id to the of id table. Any idea what else > > is different? > > By the way, STK3311 seems to have many variants lying around, and all > of them have different IDs. The pinouts seem to be different but the > registers are compatible. > > [1] is a datasheet of STK3311-S34 with ID 0x1e. > [2] is a datasheet of STK3311-A with ID 0x15. > > I cannot find the datasheet of STK3311-X, 0x12 is read from the device. > The model number itself is mentioned at [3], the official website of > sensortek. > > [1] > http://pro0fc108.hkpic1.websiteonline.cn/upload/STK3311-S34Datasheetv1.pdf > > [2] > http://pro0fc108.hkpic1.websiteonline.cn/upload/STK3311-ADatasheetv1.pdf > > [3] > http://www.sensortek.com.tw/index.php/en/products/proximity-sensor-with-als/ Yeah, it looks like it's the only one of stk3111-* variants that sensortek lists on their website. I also didn't find the *-x datasheet despite trying really hard. All the functionality seems to work with the current driver and this patch. regards, o. > > > > Thanks, > > > > Jonathan > > > > > --- > > > drivers/iio/light/stk3310.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/iio/light/stk3310.c > > > b/drivers/iio/light/stk3310.c > > > index 185c24a75ae6..1a8401d198a4 100644 > > > --- a/drivers/iio/light/stk3310.c > > > +++ b/drivers/iio/light/stk3310.c > > > @@ -37,6 +37,7 @@ > > > > > > #define STK3310_CHIP_ID_VAL 0x13 > > > #define STK3311_CHIP_ID_VAL 0x1D > > > +#define STK3311X_CHIP_ID_VAL 0x12 > > > #define STK3335_CHIP_ID_VAL 0x51 > > > #define STK3310_PSINT_EN 0x01 > > > #define STK3310_PS_MAX_VAL 0xFFFF > > > @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev > > > *indio_dev) > > > > > > if (chipid != STK3310_CHIP_ID_VAL && > > > chipid != STK3311_CHIP_ID_VAL && > > > + chipid != STK3311X_CHIP_ID_VAL && > > > chipid != STK3335_CHIP_ID_VAL) { > > > dev_err(&client->dev, "invalid chip id: 0x%x\n", > > > chipid); > > > return -ENODEV; ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] iio: light: stk3310: add chip id for STK3311-X variant 2020-07-04 16:29 ` Jonathan Cameron 2020-07-04 17:09 ` Icenowy Zheng @ 2020-07-14 10:44 ` Ondřej Jirman 2020-07-18 16:29 ` Jonathan Cameron 1 sibling, 1 reply; 6+ messages in thread From: Ondřej Jirman @ 2020-07-14 10:44 UTC (permalink / raw) To: Jonathan Cameron Cc: linux-kernel, Icenowy Zheng, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS Hello Jonathan, On Sat, Jul 04, 2020 at 05:29:16PM +0100, Jonathan Cameron wrote: > On Fri, 3 Jul 2020 21:44:05 +0200 > Ondrej Jirman <megous@megous.com> wrote: > > > From: Icenowy Zheng <icenowy@aosc.io> > > > > The STK3311 chip has a variant called STK3311-X, which has a different > > chip id of 0x12. > > > > Add the chip id to the driver. > > > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > Signed-off-by: Ondrej Jirman <megous@megous.com> > > Given this is clearly not quite compatible with the stk3311 probably > best to also add a an id to the of id table. Any idea what else > is different? I've looked at it more, and there's no stk3311 either. It always has some suffix, like -sa -9 -a -wv -x, .... So I don't think a new ID in the table is neccessary. The driver can differentiate based on chip id, in case it will ever become necessary. regards, o. > Thanks, > > Jonathan > > > --- > > drivers/iio/light/stk3310.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c > > index 185c24a75ae6..1a8401d198a4 100644 > > --- a/drivers/iio/light/stk3310.c > > +++ b/drivers/iio/light/stk3310.c > > @@ -37,6 +37,7 @@ > > > > #define STK3310_CHIP_ID_VAL 0x13 > > #define STK3311_CHIP_ID_VAL 0x1D > > +#define STK3311X_CHIP_ID_VAL 0x12 > > #define STK3335_CHIP_ID_VAL 0x51 > > #define STK3310_PSINT_EN 0x01 > > #define STK3310_PS_MAX_VAL 0xFFFF > > @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev *indio_dev) > > > > if (chipid != STK3310_CHIP_ID_VAL && > > chipid != STK3311_CHIP_ID_VAL && > > + chipid != STK3311X_CHIP_ID_VAL && > > chipid != STK3335_CHIP_ID_VAL) { > > dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid); > > return -ENODEV; > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] iio: light: stk3310: add chip id for STK3311-X variant 2020-07-14 10:44 ` Ondřej Jirman @ 2020-07-18 16:29 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-07-18 16:29 UTC (permalink / raw) To: Ondřej Jirman Cc: linux-kernel, Icenowy Zheng, Hartmut Knaack, Lars-Peter Clausen, Peter Meerwald-Stadler, Luca Weiss, open list:IIO SUBSYSTEM AND DRIVERS On Tue, 14 Jul 2020 12:44:41 +0200 Ondřej Jirman <megous@megous.com> wrote: > Hello Jonathan, > > On Sat, Jul 04, 2020 at 05:29:16PM +0100, Jonathan Cameron wrote: > > On Fri, 3 Jul 2020 21:44:05 +0200 > > Ondrej Jirman <megous@megous.com> wrote: > > > > > From: Icenowy Zheng <icenowy@aosc.io> > > > > > > The STK3311 chip has a variant called STK3311-X, which has a different > > > chip id of 0x12. > > > > > > Add the chip id to the driver. > > > > > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > > Signed-off-by: Ondrej Jirman <megous@megous.com> > > > > Given this is clearly not quite compatible with the stk3311 probably > > best to also add a an id to the of id table. Any idea what else > > is different? > > I've looked at it more, and there's no stk3311 either. It always has > some suffix, like -sa -9 -a -wv -x, .... So I don't think a new > ID in the table is neccessary. The driver can differentiate based on > chip id, in case it will ever become necessary. > Thanks for info. In that case, applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it. Thanks, Jonathan > regards, > o. > > > Thanks, > > > > Jonathan > > > > > --- > > > drivers/iio/light/stk3310.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c > > > index 185c24a75ae6..1a8401d198a4 100644 > > > --- a/drivers/iio/light/stk3310.c > > > +++ b/drivers/iio/light/stk3310.c > > > @@ -37,6 +37,7 @@ > > > > > > #define STK3310_CHIP_ID_VAL 0x13 > > > #define STK3311_CHIP_ID_VAL 0x1D > > > +#define STK3311X_CHIP_ID_VAL 0x12 > > > #define STK3335_CHIP_ID_VAL 0x51 > > > #define STK3310_PSINT_EN 0x01 > > > #define STK3310_PS_MAX_VAL 0xFFFF > > > @@ -453,6 +454,7 @@ static int stk3310_init(struct iio_dev *indio_dev) > > > > > > if (chipid != STK3310_CHIP_ID_VAL && > > > chipid != STK3311_CHIP_ID_VAL && > > > + chipid != STK3311X_CHIP_ID_VAL && > > > chipid != STK3335_CHIP_ID_VAL) { > > > dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid); > > > return -ENODEV; > > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-18 16:29 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-03 19:44 [PATCH] iio: light: stk3310: add chip id for STK3311-X variant Ondrej Jirman 2020-07-04 16:29 ` Jonathan Cameron 2020-07-04 17:09 ` Icenowy Zheng 2020-07-04 17:49 ` Ondřej Jirman 2020-07-14 10:44 ` Ondřej Jirman 2020-07-18 16:29 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).