LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] shtc1: add support for device tree bindings
@ 2020-07-05  3:47 Chris Ruehl
  2020-07-05  3:47 ` [PATCH v2 1/2] hwmon: " Chris Ruehl
  2020-07-05  3:47 ` [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl
  0 siblings, 2 replies; 6+ messages in thread
From: Chris Ruehl @ 2020-07-05  3:47 UTC (permalink / raw)
  To: Chris Ruehl
  Cc: Jack Lo, devicetree, Jean Delvare, Guenter Roeck, linux-hwmon,
	linux-kernel

Add support for DTS bindings to the shtc driver
The patches add the compatible table and of_property_read_bool to the
shtc1.c. Newly created Yaml document has been released to the
Documentation/devicetree/hwmon/sensirion,shtc1.yaml

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 Version 2
	remove the #ifdef CONFIG_OF
	ignore platform data if dev->of_node is valid
	use boolean only therefor use sensirion,low_precise to fit the logic
	add missing driver.of_match_table entry
 Version 1
	initial version

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  2020-07-05  3:47 [PATCH v2 0/2] shtc1: add support for device tree bindings Chris Ruehl
@ 2020-07-05  3:47 ` Chris Ruehl
  2020-07-07  3:53   ` Guenter Roeck
  2020-07-05  3:47 ` [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl
  1 sibling, 1 reply; 6+ messages in thread
From: Chris Ruehl @ 2020-07-05  3:47 UTC (permalink / raw)
  To: Chris Ruehl
  Cc: Jack Lo, devicetree, Jean Delvare, Guenter Roeck, linux-hwmon,
	linux-kernel

Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 drivers/hwmon/shtc1.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
index a0078ccede03..61e9275eb666 100644
--- a/drivers/hwmon/shtc1.c
+++ b/drivers/hwmon/shtc1.c
@@ -14,6 +14,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/platform_data/shtc1.h>
+#include <linux/of.h>
 
 /* commands (high precision mode) */
 static const unsigned char shtc1_cmd_measure_blocking_hpm[]    = { 0x7C, 0xA2 };
@@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
 	enum shtcx_chips chip = id->driver_data;
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
 
 	if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
 		dev_err(dev, "plain i2c transactions not supported\n");
@@ -233,8 +235,13 @@ static int shtc1_probe(struct i2c_client *client,
 	data->client = client;
 	data->chip = chip;
 
-	if (client->dev.platform_data)
+	if (np) {
+		data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking_io");
+		data->setup.high_precision = of_property_read_bool(np, "sensicon,low_precision");
+	}
+	else if (client->dev.platform_data)
 		data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+
 	shtc1_select_command(data);
 	mutex_init(&data->update_lock);
 
@@ -257,8 +264,19 @@ static const struct i2c_device_id shtc1_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, shtc1_id);
 
+static const struct of_device_id shtc1_of_match[] = {
+	{ .compatible = "sensirion,shtc1" },
+	{ .compatible = "sensirion,shtw1" },
+	{ .compatible = "sensirion,shtc3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, shtc1_of_match);
+
 static struct i2c_driver shtc1_i2c_driver = {
-	.driver.name  = "shtc1",
+	.driver = {
+		.name = "shtc1",
+		.of_match_table = shtc1_of_match,
+	},
 	.probe        = shtc1_probe,
 	.id_table     = shtc1_id,
 };
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  2020-07-05  3:47 [PATCH v2 0/2] shtc1: add support for device tree bindings Chris Ruehl
  2020-07-05  3:47 ` [PATCH v2 1/2] hwmon: " Chris Ruehl
@ 2020-07-05  3:47 ` Chris Ruehl
  2020-07-07 20:15   ` Rob Herring
  1 sibling, 1 reply; 6+ messages in thread
From: Chris Ruehl @ 2020-07-05  3:47 UTC (permalink / raw)
  To: Chris Ruehl
  Cc: Jack Lo, devicetree, Jean Delvare, Guenter Roeck, Rob Herring,
	linux-hwmon, linux-kernel

Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low_precision is used to switch to low precision.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 .../bindings/hwmon/sensirion,shtc1.yaml       | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..bcccdcadd86b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - jdelvare@suse.com
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refere to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg: I2C address 0x70
+
+Optional properties:
+  sensirion,blocking_io: |
+    bool, if set the i2c bus hold until measure finished
+  sensirion,low_precision: |
+    bool, if set aquire data with low precision (not recommend)
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+Example:
+  &i2c1 {
+    status = "okay";
+    clock-frequency = <400000>;
+
+    shtc3@70 {
+      compatible = "sensirion,shtc3";
+      reg = <0x70>
+      sensirion,blocking_io;
+      status = "okay";
+    };
+  };
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 1/2] hwmon: shtc1: add support for device tree bindings
  2020-07-05  3:47 ` [PATCH v2 1/2] hwmon: " Chris Ruehl
@ 2020-07-07  3:53   ` Guenter Roeck
  0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2020-07-07  3:53 UTC (permalink / raw)
  To: Chris Ruehl; +Cc: Jack Lo, devicetree, Jean Delvare, linux-hwmon, linux-kernel

On Sun, Jul 05, 2020 at 11:47:25AM +0800, Chris Ruehl wrote:
> Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
>  drivers/hwmon/shtc1.c | 22 ++++++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
> index a0078ccede03..61e9275eb666 100644
> --- a/drivers/hwmon/shtc1.c
> +++ b/drivers/hwmon/shtc1.c
> @@ -14,6 +14,7 @@
>  #include <linux/err.h>
>  #include <linux/delay.h>
>  #include <linux/platform_data/shtc1.h>
> +#include <linux/of.h>
>  
>  /* commands (high precision mode) */
>  static const unsigned char shtc1_cmd_measure_blocking_hpm[]    = { 0x7C, 0xA2 };
> @@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
>  	enum shtcx_chips chip = id->driver_data;
>  	struct i2c_adapter *adap = client->adapter;
>  	struct device *dev = &client->dev;
> +	struct device_node *np = dev->of_node;
>  
>  	if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
>  		dev_err(dev, "plain i2c transactions not supported\n");
> @@ -233,8 +235,13 @@ static int shtc1_probe(struct i2c_client *client,
>  	data->client = client;
>  	data->chip = chip;
>  
> -	if (client->dev.platform_data)
> +	if (np) {
> +		data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking_io");
> +		data->setup.high_precision = of_property_read_bool(np, "sensicon,low_precision");

Just noticed. Presumably that would have to be:

		data->setup.high_precision = !of_property_read_bool(np, "sensicon,low_precision");

> +	}
> +	else if (client->dev.platform_data)
>  		data->setup = *(struct shtc1_platform_data *)dev->platform_data;
> +
>  	shtc1_select_command(data);
>  	mutex_init(&data->update_lock);
>  
> @@ -257,8 +264,19 @@ static const struct i2c_device_id shtc1_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, shtc1_id);
>  
> +static const struct of_device_id shtc1_of_match[] = {
> +	{ .compatible = "sensirion,shtc1" },
> +	{ .compatible = "sensirion,shtw1" },
> +	{ .compatible = "sensirion,shtc3" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, shtc1_of_match);
> +
>  static struct i2c_driver shtc1_i2c_driver = {
> -	.driver.name  = "shtc1",
> +	.driver = {
> +		.name = "shtc1",
> +		.of_match_table = shtc1_of_match,
> +	},
>  	.probe        = shtc1_probe,
>  	.id_table     = shtc1_id,
>  };

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  2020-07-05  3:47 ` [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl
@ 2020-07-07 20:15   ` Rob Herring
  2020-07-08  3:27     ` Chris Ruehl
  0 siblings, 1 reply; 6+ messages in thread
From: Rob Herring @ 2020-07-07 20:15 UTC (permalink / raw)
  To: Chris Ruehl
  Cc: Rob Herring, Jack Lo, Jean Delvare, linux-kernel, Guenter Roeck,
	linux-hwmon, devicetree

On Sun, 05 Jul 2020 11:47:26 +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low_precision is used to switch to low precision.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
>  .../bindings/hwmon/sensirion,shtc1.yaml       | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml:  while parsing a flow mapping
  in "<unicode string>", line 43, column 9
did not find expected ',' or '}'
  in "<unicode string>", line 47, column 14
Documentation/devicetree/bindings/Makefile:20: recipe for target 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
Makefile:1347: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1322963

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml
  2020-07-07 20:15   ` Rob Herring
@ 2020-07-08  3:27     ` Chris Ruehl
  0 siblings, 0 replies; 6+ messages in thread
From: Chris Ruehl @ 2020-07-08  3:27 UTC (permalink / raw)
  To: Rob Herring
  Cc: Rob Herring, Jack Lo, Jean Delvare, linux-kernel, Guenter Roeck,
	linux-hwmon, devicetree

On 8/7/2020 4:15 am, Rob Herring wrote:
> On Sun, 05 Jul 2020 11:47:26 +0800, Chris Ruehl wrote:
>> Add documentation for the newly added DTS support in the shtc1 driver.
>> To align with the drivers logic to have high precision by default
>> a boolean sensirion,low_precision is used to switch to low precision.
>>
>> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
>> ---
>>   .../bindings/hwmon/sensirion,shtc1.yaml       | 53 +++++++++++++++++++
>>   1 file changed, 53 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
>>
> 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml:  while parsing a flow mapping
>    in "<unicode string>", line 43, column 9
> did not find expected ',' or '}'
>    in "<unicode string>", line 47, column 14
> Documentation/devicetree/bindings/Makefile:20: recipe for target 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts' failed
> make[1]: *** [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts] Error 1
> make[1]: *** Waiting for unfinished jobs....
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml: ignoring, error parsing file
> warning: no schema found in file: ./Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml: ignoring, error parsing file
> warning: no schema found in file: ./Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> Makefile:1347: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
> 
> 
> See https://patchwork.ozlabs.org/patch/1322963
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> 
> Please check and re-submit.
> 

Rob,

I installed now latest scheme and run dt_binding_check, its clean now.
..
"CHKDT   Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
"CHKDT   Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
..

Will be submit with v4 of the patch set.

Thanks.
Chris

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-05  3:47 [PATCH v2 0/2] shtc1: add support for device tree bindings Chris Ruehl
2020-07-05  3:47 ` [PATCH v2 1/2] hwmon: " Chris Ruehl
2020-07-07  3:53   ` Guenter Roeck
2020-07-05  3:47 ` [PATCH v2 2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml Chris Ruehl
2020-07-07 20:15   ` Rob Herring
2020-07-08  3:27     ` Chris Ruehl

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git