[PATCH AUTOSEL 4.4 1/4] regmap: dev_get_regmap_match(): fix string comparison

[PATCH AUTOSEL 4.4 1/4] regmap: dev_get_regmap_match(): fix string comparison

[Sasha Levin]

From: Marc Kleine-Budde <mkl@pengutronix.de>

[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]

This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.

The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.

Fix this by using strcmp() instead.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 77cabde977edd..4a4efc6f54b55 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1106,7 +1106,7 @@ static int dev_get_regmap_match(struct device *dev, void *res, void *data)
 
 	/* If the user didn't specify a name match any */
 	if (data)
-		return (*r)->name == data;
+		return !strcmp((*r)->name, data);
 	else
 		return 1;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.4 2/4] usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]

gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/gr_udc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 594639e5cbf82..78168e1827b5e 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2001,9 +2001,12 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
 
 	if (num == 0) {
 		_req = gr_alloc_request(&ep->ep, GFP_ATOMIC);
+		if (!_req)
+			return -ENOMEM;
+
 		buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC);
-		if (!_req || !buf) {
-			/* possible _req freed by gr_probe via gr_remove */
+		if (!buf) {
+			gr_free_request(&ep->ep, _req);
 			return -ENOMEM;
 		}
 
-- 
2.25.1

[PATCH AUTOSEL 4.4 3/4] arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]

Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/debug-monitors.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 8e7675e5ce4a5..77fbcabcd9e34 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -387,13 +387,13 @@ void user_rewind_single_step(struct task_struct *task)
 	 * If single step is active for this thread, then set SPSR.SS
 	 * to 1 to avoid returning to the active-pending state.
 	 */
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		set_regs_spsr_ss(task_pt_regs(task));
 }
 
 void user_fastforward_single_step(struct task_struct *task)
 {
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		clear_regs_spsr_ss(task_pt_regs(task));
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.4 4/4] x86: math-emu: Fix up 'cmp' insn for clang ias

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]

The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:

arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
 cmp $0xffffffff,-24(%ebp)
 ^

Make this a 32-bit comparison, which it was clearly meant to be.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/math-emu/wm_sqrt.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S
index d258f59564e11..3b40c98bbbd40 100644
--- a/arch/x86/math-emu/wm_sqrt.S
+++ b/arch/x86/math-emu/wm_sqrt.S
@@ -208,7 +208,7 @@ sqrt_stage_2_finish:
 
 #ifdef PARANOID
 /* It should be possible to get here only if the arg is ffff....ffff */
-	cmp	$0xffffffff,FPU_fsqrt_arg_1
+	cmpl	$0xffffffff,FPU_fsqrt_arg_1
 	jnz	sqrt_stage_2_error
 #endif /* PARANOID */
 
-- 
2.25.1