linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
To: Michael Ellerman <michaele@au1.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Ingo Molnar <mingo@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Valentin Schneider <valentin.schneider@arm.com>,
	Nick Piggin <npiggin@au1.ibm.com>,
	Oliver OHalloran <oliveroh@au1.ibm.com>,
	Nathan Lynch <nathanl@linux.ibm.com>,
	Michael Neuling <mikey@linux.ibm.com>,
	Anton Blanchard <anton@au1.ibm.com>,
	Gautham R Shenoy <ego@linux.vnet.ibm.com>,
	Vaidyanathan Srinivasan <svaidy@linux.ibm.com>,
	Jordan Niethe <jniethe5@gmail.com>
Subject: [PATCH v2 02/10] powerpc/smp: Merge Power9 topology with Power topology
Date: Tue, 21 Jul 2020 17:08:06 +0530	[thread overview]
Message-ID: <20200721113814.32284-3-srikar@linux.vnet.ibm.com> (raw)
In-Reply-To: <20200721113814.32284-1-srikar@linux.vnet.ibm.com>

A new sched_domain_topology_level was added just for Power9. However the
same can be achieved by merging powerpc_topology with power9_topology
and makes the code more simpler especially when adding a new sched
domain.

Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Nick Piggin <npiggin@au1.ibm.com>
Cc: Oliver OHalloran <oliveroh@au1.ibm.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Michael Neuling <mikey@linux.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Cc: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
---
Changelog v1 -> v2:
powerpc/smp: Merge Power9 topology with Power topology
	Replaced a reference to cpu_smt_mask with per_cpu(cpu_sibling_map, cpu)
	since cpu_smt_mask is only defined under CONFIG_SCHED_SMT

 arch/powerpc/kernel/smp.c | 33 ++++++++++-----------------------
 1 file changed, 10 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 680c0edcc59d..0e0b118d9b6e 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1315,7 +1315,7 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_SCHED_SMT
-/* cpumask of CPUs with asymetric SMT dependancy */
+/* cpumask of CPUs with asymmetric SMT dependency */
 static int powerpc_smt_flags(void)
 {
 	int flags = SD_SHARE_CPUCAPACITY | SD_SHARE_PKG_RESOURCES;
@@ -1328,14 +1328,6 @@ static int powerpc_smt_flags(void)
 }
 #endif
 
-static struct sched_domain_topology_level powerpc_topology[] = {
-#ifdef CONFIG_SCHED_SMT
-	{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
-#endif
-	{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
-	{ NULL, },
-};
-
 /*
  * P9 has a slightly odd architecture where pairs of cores share an L2 cache.
  * This topology makes it *much* cheaper to migrate tasks between adjacent cores
@@ -1353,7 +1345,13 @@ static int powerpc_shared_cache_flags(void)
  */
 static const struct cpumask *shared_cache_mask(int cpu)
 {
-	return cpu_l2_cache_mask(cpu);
+	if (shared_caches)
+		return cpu_l2_cache_mask(cpu);
+
+	if (has_big_cores)
+		return cpu_smallcore_mask(cpu);
+
+	return per_cpu(cpu_sibling_map, cpu);
 }
 
 #ifdef CONFIG_SCHED_SMT
@@ -1363,7 +1361,7 @@ static const struct cpumask *smallcore_smt_mask(int cpu)
 }
 #endif
 
-static struct sched_domain_topology_level power9_topology[] = {
+static struct sched_domain_topology_level powerpc_topology[] = {
 #ifdef CONFIG_SCHED_SMT
 	{ cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) },
 #endif
@@ -1388,21 +1386,10 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_SCHED_SMT
 	if (has_big_cores) {
 		pr_info("Big cores detected but using small core scheduling\n");
-		power9_topology[0].mask = smallcore_smt_mask;
 		powerpc_topology[0].mask = smallcore_smt_mask;
 	}
 #endif
-	/*
-	 * If any CPU detects that it's sharing a cache with another CPU then
-	 * use the deeper topology that is aware of this sharing.
-	 */
-	if (shared_caches) {
-		pr_info("Using shared cache scheduler topology\n");
-		set_sched_topology(power9_topology);
-	} else {
-		pr_info("Using standard scheduler topology\n");
-		set_sched_topology(powerpc_topology);
-	}
+	set_sched_topology(powerpc_topology);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-- 
2.17.1


  parent reply	other threads:[~2020-07-21 11:39 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 11:38 [PATCH v2 00/10] Coregroup support on Powerpc Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 01/10] powerpc/smp: Cache node for reuse Srikar Dronamraju
2020-07-22  7:41   ` Michael Ellerman
2020-07-22  8:04     ` Srikar Dronamraju
2020-07-21 11:38 ` Srikar Dronamraju [this message]
2020-07-22  5:48   ` [PATCH v2 02/10] powerpc/smp: Merge Power9 topology with Power topology Gautham R Shenoy
2020-07-21 11:38 ` [PATCH v2 03/10] powerpc/smp: Move powerpc_topology above Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 04/10] powerpc/smp: Enable small core scheduling sooner Srikar Dronamraju
2020-07-22  5:59   ` Gautham R Shenoy
2020-07-22  6:59     ` Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 05/10] powerpc/smp: Dont assume l2-cache to be superset of sibling Srikar Dronamraju
2020-07-22  6:21   ` Gautham R Shenoy
2020-07-22  6:57     ` Srikar Dronamraju
2020-07-24  7:10       ` Gautham R Shenoy
2020-07-21 11:38 ` [PATCH v2 06/10] powerpc/smp: Generalize 2nd sched domain Srikar Dronamraju
2020-07-22  6:56   ` Gautham R Shenoy
2020-07-22  7:39     ` Srikar Dronamraju
2020-07-22  7:46   ` peterz
2020-07-22  8:18     ` Srikar Dronamraju
2020-07-22  8:48       ` Peter Zijlstra
2020-07-22  8:54         ` peterz
2020-07-21 11:38 ` [PATCH v2 07/10] Powerpc/numa: Detect support for coregroup Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 08/10] powerpc/smp: Allocate cpumask only after searching thread group Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 09/10] Powerpc/smp: Create coregroup domain Srikar Dronamraju
2020-07-22  7:04   ` Gautham R Shenoy
2020-07-22  7:29     ` Srikar Dronamraju
2020-07-21 11:38 ` [PATCH v2 10/10] powerpc/smp: Implement cpu_to_coregroup_id Srikar Dronamraju
2020-07-22  7:06   ` Gautham R Shenoy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721113814.32284-3-srikar@linux.vnet.ibm.com \
    --to=srikar@linux.vnet.ibm.com \
    --cc=anton@au1.ibm.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=jniethe5@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=michaele@au1.ibm.com \
    --cc=mikey@linux.ibm.com \
    --cc=mingo@kernel.org \
    --cc=nathanl@linux.ibm.com \
    --cc=npiggin@au1.ibm.com \
    --cc=oliveroh@au1.ibm.com \
    --cc=peterz@infradead.org \
    --cc=svaidy@linux.ibm.com \
    --cc=valentin.schneider@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).