* [PATCH] drm/bridge/adv7511: set the bridge type properly
@ 2020-07-20 12:42 Laurentiu Palcu
2020-07-22 12:15 ` Laurent Pinchart
2020-07-26 17:08 ` Sam Ravnborg
0 siblings, 2 replies; 4+ messages in thread
From: Laurentiu Palcu @ 2020-07-20 12:42 UTC (permalink / raw)
To: Andrzej Hajda, Neil Armstrong, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, David Airlie, Daniel Vetter
Cc: linux-imx, laurentiu.palcu, dri-devel, linux-kernel
From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
After the drm_bridge_connector_init() helper function has been added, the ADV
driver has been changed accordingly. However, the 'type' field of the bridge
structure was left unset, which makes the helper function always return -EINVAL.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
---
Hi,
I've hit this while trying to use this helper in the new i.MX8MQ DCSS
driver, as suggested by Sam, and I wanted to test it with NWL MIPI_DSI and
ADV since support is already in mainline.
Thanks,
laurentiu
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index f45cdca9cce5..a0d392c338da 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1283,6 +1283,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
| DRM_BRIDGE_OP_HPD;
adv7511->bridge.of_node = dev->of_node;
+ adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
drm_bridge_add(&adv7511->bridge);
--
2.23.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/bridge/adv7511: set the bridge type properly
2020-07-20 12:42 [PATCH] drm/bridge/adv7511: set the bridge type properly Laurentiu Palcu
@ 2020-07-22 12:15 ` Laurent Pinchart
2020-07-24 4:22 ` Vinod Koul
2020-07-26 17:08 ` Sam Ravnborg
1 sibling, 1 reply; 4+ messages in thread
From: Laurent Pinchart @ 2020-07-22 12:15 UTC (permalink / raw)
To: Laurentiu Palcu
Cc: Andrzej Hajda, Neil Armstrong, Jonas Karlman, Jernej Skrabec,
David Airlie, Daniel Vetter, linux-imx, dri-devel, linux-kernel
Hi Laurentiu,
Thank you for the patch.
On Mon, Jul 20, 2020 at 03:42:27PM +0300, Laurentiu Palcu wrote:
> From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
>
> After the drm_bridge_connector_init() helper function has been added, the ADV
> driver has been changed accordingly. However, the 'type' field of the bridge
> structure was left unset, which makes the helper function always return -EINVAL.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Hi,
>
> I've hit this while trying to use this helper in the new i.MX8MQ DCSS
> driver, as suggested by Sam, and I wanted to test it with NWL MIPI_DSI and
> ADV since support is already in mainline.
>
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index f45cdca9cce5..a0d392c338da 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1283,6 +1283,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
> | DRM_BRIDGE_OP_HPD;
> adv7511->bridge.of_node = dev->of_node;
> + adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
>
> drm_bridge_add(&adv7511->bridge);
>
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/bridge/adv7511: set the bridge type properly
2020-07-22 12:15 ` Laurent Pinchart
@ 2020-07-24 4:22 ` Vinod Koul
0 siblings, 0 replies; 4+ messages in thread
From: Vinod Koul @ 2020-07-24 4:22 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Laurentiu Palcu, Jernej Skrabec, Jonas Karlman, David Airlie,
Neil Armstrong, linux-kernel, dri-devel, Andrzej Hajda,
linux-imx
On 22-07-20, 15:15, Laurent Pinchart wrote:
> Hi Laurentiu,
>
> Thank you for the patch.
>
> On Mon, Jul 20, 2020 at 03:42:27PM +0300, Laurentiu Palcu wrote:
> > From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
> >
> > After the drm_bridge_connector_init() helper function has been added, the ADV
> > driver has been changed accordingly. However, the 'type' field of the bridge
> > structure was left unset, which makes the helper function always return -EINVAL.
> >
> > Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Thanks Laurent for pointing me to this.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
I have tested this on DragonBoard 410c:
Tested-by: Vinod Koul <vkoul@kernel.org>
--
~Vinod
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] drm/bridge/adv7511: set the bridge type properly
2020-07-20 12:42 [PATCH] drm/bridge/adv7511: set the bridge type properly Laurentiu Palcu
2020-07-22 12:15 ` Laurent Pinchart
@ 2020-07-26 17:08 ` Sam Ravnborg
1 sibling, 0 replies; 4+ messages in thread
From: Sam Ravnborg @ 2020-07-26 17:08 UTC (permalink / raw)
To: Laurentiu Palcu
Cc: Andrzej Hajda, Neil Armstrong, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, David Airlie, Daniel Vetter, linux-kernel,
linux-imx, dri-devel
On Mon, Jul 20, 2020 at 03:42:27PM +0300, Laurentiu Palcu wrote:
> From: Laurentiu Palcu <laurentiu.palcu@nxp.com>
>
> After the drm_bridge_connector_init() helper function has been added, the ADV
> driver has been changed accordingly. However, the 'type' field of the bridge
> structure was left unset, which makes the helper function always return -EINVAL.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Thanks, applied to drm-misc-fixes.
Sam
> ---
> Hi,
>
> I've hit this while trying to use this helper in the new i.MX8MQ DCSS
> driver, as suggested by Sam, and I wanted to test it with NWL MIPI_DSI and
> ADV since support is already in mainline.
>
> Thanks,
> laurentiu
>
>
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index f45cdca9cce5..a0d392c338da 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1283,6 +1283,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
> | DRM_BRIDGE_OP_HPD;
> adv7511->bridge.of_node = dev->of_node;
> + adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
>
> drm_bridge_add(&adv7511->bridge);
>
> --
> 2.23.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-07-26 17:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-20 12:42 [PATCH] drm/bridge/adv7511: set the bridge type properly Laurentiu Palcu
2020-07-22 12:15 ` Laurent Pinchart
2020-07-24 4:22 ` Vinod Koul
2020-07-26 17:08 ` Sam Ravnborg
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).