From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 03/10] bus: mhi: core: Use helper API to trigger a non-blocking host resume
Date: Fri, 24 Jul 2020 11:39:22 +0530 [thread overview]
Message-ID: <20200724060922.GA19688@Mani-XPS-13-9360> (raw)
In-Reply-To: <1595543802-17859-4-git-send-email-bbhatt@codeaurora.org>
On Thu, Jul 23, 2020 at 03:36:35PM -0700, Bhaumik Bhatt wrote:
> Autonomous low power mode support requires the MHI host to resume from
> multiple places and post a wakeup source to exit system suspend. This
> needs to be done in a non-blocking manner. Introduce a helper API to
> trigger the host resume for data transfers and other non-blocking use
> cases while supporting implementation of autonomous low power modes.
>
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> drivers/bus/mhi/core/internal.h | 7 +++++++
> drivers/bus/mhi/core/main.c | 21 +++++++--------------
> drivers/bus/mhi/core/pm.c | 13 ++++---------
> 3 files changed, 18 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index bcfa7b6..1bbd6e9 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -599,6 +599,13 @@ int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl);
> int mhi_send_cmd(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
> enum mhi_cmd_type cmd);
>
> +static inline void mhi_trigger_resume(struct mhi_controller *mhi_cntrl)
> +{
> + pm_wakeup_event(&mhi_cntrl->mhi_dev->dev, 0);
> + mhi_cntrl->runtime_get(mhi_cntrl);
> + mhi_cntrl->runtime_put(mhi_cntrl);
> +}
> +
> /* Register access methods */
> void mhi_db_brstmode(struct mhi_controller *mhi_cntrl, struct db_cfg *db_cfg,
> void __iomem *db_addr, dma_addr_t db_val);
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 1f622ce..79be18e 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -909,8 +909,7 @@ void mhi_ctrl_ev_task(unsigned long data)
> * process it since we are probably in a suspended state,
> * so trigger a resume.
> */
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> + mhi_trigger_resume(mhi_cntrl);
>
> return;
> }
> @@ -971,10 +970,8 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
> }
>
> /* we're in M3 or transitioning to M3 */
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> - }
> + if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> + mhi_trigger_resume(mhi_cntrl);
>
> /* Toggle wake to exit out of M2 */
> mhi_cntrl->wake_toggle(mhi_cntrl);
> @@ -1032,10 +1029,8 @@ int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
> }
>
> /* we're in M3 or transitioning to M3 */
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> - }
> + if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> + mhi_trigger_resume(mhi_cntrl);
>
> /* Toggle wake to exit out of M2 */
> mhi_cntrl->wake_toggle(mhi_cntrl);
> @@ -1147,10 +1142,8 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
> read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>
> /* we're in M3 or transitioning to M3 */
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> - }
> + if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> + mhi_trigger_resume(mhi_cntrl);
>
> /* Toggle wake to exit out of M2 */
> mhi_cntrl->wake_toggle(mhi_cntrl);
> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
> index 661d704..b227d41 100644
> --- a/drivers/bus/mhi/core/pm.c
> +++ b/drivers/bus/mhi/core/pm.c
> @@ -824,11 +824,8 @@ int __mhi_device_get_sync(struct mhi_controller *mhi_cntrl)
> /* Wake up the device */
> read_lock_bh(&mhi_cntrl->pm_lock);
> mhi_cntrl->wake_get(mhi_cntrl, true);
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
> - pm_wakeup_event(&mhi_cntrl->mhi_dev->dev, 0);
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> - }
> + if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> + mhi_trigger_resume(mhi_cntrl);
> read_unlock_bh(&mhi_cntrl->pm_lock);
>
> ret = wait_event_timeout(mhi_cntrl->state_event,
> @@ -1139,10 +1136,8 @@ void mhi_device_put(struct mhi_device *mhi_dev)
>
> mhi_dev->dev_wake--;
> read_lock_bh(&mhi_cntrl->pm_lock);
> - if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state)) {
> - mhi_cntrl->runtime_get(mhi_cntrl);
> - mhi_cntrl->runtime_put(mhi_cntrl);
> - }
> + if (MHI_PM_IN_SUSPEND_STATE(mhi_cntrl->pm_state))
> + mhi_trigger_resume(mhi_cntrl);
>
> mhi_cntrl->wake_put(mhi_cntrl, false);
> read_unlock_bh(&mhi_cntrl->pm_lock);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
next prev parent reply other threads:[~2020-07-24 6:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 22:36 [PATCH v5 00/10] Introduce features and debugfs/sysfs entries for MHI Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 01/10] bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declaration Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 02/10] bus: mhi: core: Abort suspends due to outgoing pending packets Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 03/10] bus: mhi: core: Use helper API to trigger a non-blocking host resume Bhaumik Bhatt
2020-07-24 6:09 ` Manivannan Sadhasivam [this message]
2020-07-23 22:36 ` [PATCH v5 04/10] bus: mhi: core: Trigger host resume if suspended during mhi_device_get() Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 05/10] bus: mhi: core: Use generic name field for an MHI device Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 06/10] bus: mhi: core: Introduce helper function to check device state Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 07/10] bus: mhi: core: Introduce debugfs entries for MHI Bhaumik Bhatt
2020-07-24 4:11 ` kernel test robot
2020-07-24 23:46 ` kernel test robot
2020-07-23 22:36 ` [PATCH v5 08/10] bus: mhi: core: Use counters to track MHI device state transitions Bhaumik Bhatt
2020-07-24 5:24 ` Manivannan Sadhasivam
2020-07-23 22:36 ` [PATCH v5 09/10] bus: mhi: core: Read and save device hardware information from BHI Bhaumik Bhatt
2020-07-23 22:36 ` [PATCH v5 10/10] bus: mhi: core: Introduce sysfs entries for MHI Bhaumik Bhatt
2020-07-24 5:42 ` Manivannan Sadhasivam
2020-07-28 0:29 ` bbhatt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200724060922.GA19688@Mani-XPS-13-9360 \
--to=manivannan.sadhasivam@linaro.org \
--cc=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).