* [PATCH v1] mfd: dln2: Run event handler loop under spinlock
@ 2020-07-23 13:02 Andy Shevchenko
2020-07-27 14:03 ` Lee Jones
0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2020-07-23 13:02 UTC (permalink / raw)
To: Lee Jones, linux-kernel; +Cc: Andy Shevchenko
The event handler loop must be run with interrupts disabled.
Otherwise we will have a warning:
[ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
[ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
[ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
...
[ 1970.946994] Call Trace:
[ 1970.949446] <IRQ>
[ 1970.951471] handle_irq_event_percpu+0x2c/0x80
[ 1970.955921] handle_irq_event+0x23/0x43
[ 1970.959766] handle_simple_irq+0x57/0x70
[ 1970.963695] generic_handle_irq+0x42/0x50
[ 1970.967717] dln2_rx+0xc1/0x210 [dln2]
[ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
[ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0
[ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0
[ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0
...
Recently xHCI driver switched to tasklets in the commit 36dc01657b49
("usb: host: xhci: Support running urb giveback in tasklet context").
The handle_irq_event_* functions are expected to be called with interrupts
disabled and they rightfully complain here because we run in tasklet context
with interrupts enabled.
Use a event spinlock to protect event handler from being interrupted.
Note, that there are only two users of this GPIO and ADC drivers and both of
them are using generic_handle_irq() which makes above happen.
Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mfd/dln2.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 39276fa626d2..83e676a096dc 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -287,7 +287,11 @@ static void dln2_rx(struct urb *urb)
len = urb->actual_length - sizeof(struct dln2_header);
if (handle == DLN2_HANDLE_EVENT) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
dln2_run_event_callbacks(dln2, id, echo, data, len);
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
} else {
/* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
if (dln2_transfer_complete(dln2, urb, handle, echo))
--
2.27.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1] mfd: dln2: Run event handler loop under spinlock
2020-07-23 13:02 [PATCH v1] mfd: dln2: Run event handler loop under spinlock Andy Shevchenko
@ 2020-07-27 14:03 ` Lee Jones
0 siblings, 0 replies; 2+ messages in thread
From: Lee Jones @ 2020-07-27 14:03 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: linux-kernel
On Thu, 23 Jul 2020, Andy Shevchenko wrote:
> The event handler loop must be run with interrupts disabled.
> Otherwise we will have a warning:
>
> [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
> [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
> [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
> ...
> [ 1970.946994] Call Trace:
> [ 1970.949446] <IRQ>
> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80
> [ 1970.955921] handle_irq_event+0x23/0x43
> [ 1970.959766] handle_simple_irq+0x57/0x70
> [ 1970.963695] generic_handle_irq+0x42/0x50
> [ 1970.967717] dln2_rx+0xc1/0x210 [dln2]
> [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
> [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0
> [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0
> [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0
> ...
>
> Recently xHCI driver switched to tasklets in the commit 36dc01657b49
> ("usb: host: xhci: Support running urb giveback in tasklet context").
>
> The handle_irq_event_* functions are expected to be called with interrupts
> disabled and they rightfully complain here because we run in tasklet context
> with interrupts enabled.
>
> Use a event spinlock to protect event handler from being interrupted.
>
> Note, that there are only two users of this GPIO and ADC drivers and both of
> them are using generic_handle_irq() which makes above happen.
>
> Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/mfd/dln2.c | 4 ++++
> 1 file changed, 4 insertions(+)
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-27 14:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-23 13:02 [PATCH v1] mfd: dln2: Run event handler loop under spinlock Andy Shevchenko
2020-07-27 14:03 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).