linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Atish Patra <atish.patra@wdc.com>
To: kvm-riscv@lists.infradead.org, linux-riscv@lists.infradead.org
Cc: Atish Patra <atish.patra@wdc.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Anup Patel <anup.patel@wdc.com>,
	Kefeng Wang <wangkefeng.wang@huawei.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Alexander Graf <graf@amazon.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Alistair Francis <Alistair.Francis@wdc.com>
Subject: [PATCH 5/6] RISC-V: Add v0.1 replacement SBI extensions defined in v02
Date: Mon,  3 Aug 2020 10:58:45 -0700	[thread overview]
Message-ID: <20200803175846.26272-6-atish.patra@wdc.com> (raw)
In-Reply-To: <20200803175846.26272-1-atish.patra@wdc.com>

The SBI v0.2 contains some of the improved versions of required v0.1
extensions such as remote fence, timer and IPI.

This patch implements those extensions.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 arch/riscv/kvm/Makefile           |   2 +-
 arch/riscv/kvm/vcpu_sbi.c         |   6 ++
 arch/riscv/kvm/vcpu_sbi_replace.c | 136 ++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/kvm/vcpu_sbi_replace.c

diff --git a/arch/riscv/kvm/Makefile b/arch/riscv/kvm/Makefile
index a95c91ba9a51..b0e8b760fda0 100644
--- a/arch/riscv/kvm/Makefile
+++ b/arch/riscv/kvm/Makefile
@@ -10,5 +10,5 @@ kvm-objs := $(common-objs-y)
 
 kvm-objs += main.o vm.o vmid.o tlb.o mmu.o
 kvm-objs += vcpu.o vcpu_exit.o vcpu_switch.o vcpu_timer.o
-kvm-objs += vcpu_sbi.o vcpu_sbi_base.o vcpu_sbi_legacy.o
+kvm-objs += vcpu_sbi.o vcpu_sbi_base.o vcpu_sbi_legacy.o vcpu_sbi_replace.o
 obj-$(CONFIG_KVM)	+= kvm.o
diff --git a/arch/riscv/kvm/vcpu_sbi.c b/arch/riscv/kvm/vcpu_sbi.c
index bb50d63f78e7..8c3ca522dddb 100644
--- a/arch/riscv/kvm/vcpu_sbi.c
+++ b/arch/riscv/kvm/vcpu_sbi.c
@@ -32,10 +32,16 @@ static int kvm_linux_err_map_sbi(int err)
 
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_legacy;
 extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_base;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_time;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_ipi;
+extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence;
 
 static const struct kvm_vcpu_sbi_extension *sbi_ext[] = {
 	&vcpu_sbi_ext_legacy,
 	&vcpu_sbi_ext_base,
+	&vcpu_sbi_ext_time,
+	&vcpu_sbi_ext_ipi,
+	&vcpu_sbi_ext_rfence,
 };
 
 void kvm_riscv_vcpu_sbi_forward(struct kvm_vcpu *vcpu, struct kvm_run *run)
diff --git a/arch/riscv/kvm/vcpu_sbi_replace.c b/arch/riscv/kvm/vcpu_sbi_replace.c
new file mode 100644
index 000000000000..8e6b57fc1622
--- /dev/null
+++ b/arch/riscv/kvm/vcpu_sbi_replace.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *     Atish Patra <atish.patra@wdc.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kvm_host.h>
+#include <asm/csr.h>
+#include <asm/sbi.h>
+#include <asm/kvm_vcpu_timer.h>
+#include <asm/kvm_vcpu_sbi.h>
+
+static int kvm_sbi_ext_time_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
+				    unsigned long *out_val,
+				    struct kvm_cpu_trap *utrap, bool *exit)
+{
+	int ret = 0;
+	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
+	u64 next_cycle;
+
+	if (!cp || (cp->a6 != SBI_EXT_TIME_SET_TIMER))
+		return -EINVAL;
+
+#if __riscv_xlen == 32
+	next_cycle = ((u64)cp->a1 << 32) | (u64)cp->a0;
+#else
+	next_cycle = (u64)cp->a0;
+#endif
+	kvm_riscv_vcpu_timer_next_event(vcpu, next_cycle);
+
+	return ret;
+}
+
+const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_time = {
+	.extid_start = SBI_EXT_TIME,
+	.extid_end = SBI_EXT_TIME,
+	.handler = kvm_sbi_ext_time_handler,
+};
+
+static int kvm_sbi_ext_ipi_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
+				   unsigned long *out_val,
+				   struct kvm_cpu_trap *utrap, bool *exit)
+{
+	int i, ret = 0;
+	struct kvm_vcpu *tmp;
+	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
+	unsigned long hmask = cp->a0;
+	unsigned long hbase = cp->a1;
+
+	if (!cp || (cp->a6 != SBI_EXT_IPI_SEND_IPI))
+		return -EINVAL;
+
+	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
+		if (hbase != -1UL) {
+			if (tmp->vcpu_id < hbase)
+				continue;
+			if (!(hmask & (1UL << (tmp->vcpu_id - hbase))))
+				continue;
+		}
+		ret = kvm_riscv_vcpu_set_interrupt(tmp, IRQ_VS_SOFT);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_ipi = {
+	.extid_start = SBI_EXT_IPI,
+	.extid_end = SBI_EXT_IPI,
+	.handler = kvm_sbi_ext_ipi_handler,
+};
+
+static int kvm_sbi_ext_rfence_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
+				      unsigned long *out_val,
+				      struct kvm_cpu_trap *utrap, bool *exit)
+{
+	int i, ret = 0;
+	struct cpumask cm, hm;
+	struct kvm_vcpu *tmp;
+	struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
+	unsigned long hmask = cp->a0;
+	unsigned long hbase = cp->a1;
+	unsigned long funcid = cp->a6;
+
+	if (!cp)
+		return -EINVAL;
+
+	cpumask_clear(&cm);
+	cpumask_clear(&hm);
+	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
+		if (hbase != -1UL) {
+			if (tmp->vcpu_id < hbase)
+				continue;
+			if (!(hmask & (1UL << (tmp->vcpu_id - hbase))))
+				continue;
+		}
+		if (tmp->cpu < 0)
+			continue;
+		cpumask_set_cpu(tmp->cpu, &cm);
+	}
+
+	riscv_cpuid_to_hartid_mask(&cm, &hm);
+
+	switch (funcid) {
+	case SBI_EXT_RFENCE_REMOTE_FENCE_I:
+		ret = sbi_remote_fence_i(cpumask_bits(&hm));
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA:
+		ret = sbi_remote_hfence_vvma(cpumask_bits(&hm), cp->a2, cp->a3);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID:
+		ret = sbi_remote_hfence_vvma_asid(cpumask_bits(&hm), cp->a2,
+						  cp->a3, cp->a4);
+		break;
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA:
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID:
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA:
+	case SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID:
+	/* TODO: implement for nested hypervisor case */
+	default:
+		ret = -ENOTSUPP;
+	}
+
+	return ret;
+}
+
+const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_rfence = {
+	.extid_start = SBI_EXT_RFENCE,
+	.extid_end = SBI_EXT_RFENCE,
+	.handler = kvm_sbi_ext_rfence_handler,
+};
-- 
2.24.0


  parent reply	other threads:[~2020-08-03 17:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-03 17:58 [PATCH 0/6] Add SBI v0.2 support for KVM Atish Patra
2020-08-03 17:58 ` [PATCH 1/6] RISC-V: Add a non-void return for sbi v02 functions Atish Patra
2020-08-03 17:58 ` [PATCH 2/6] RISC-V: Mark the existing SBI v0.1 implementation as legacy Atish Patra
2020-08-03 17:58 ` [PATCH 3/6] RISC-V: Reorganize SBI code by moving legacy SBI to its own file Atish Patra
2020-08-03 17:58 ` [PATCH 4/6] RISC-V: Add SBI v0.2 base extension Atish Patra
2020-08-03 17:58 ` Atish Patra [this message]
2020-08-03 17:58 ` [PATCH 6/6] RISC-V: Add SBI HSM extension in KVM Atish Patra
2020-11-27  8:14 ` [PATCH 0/6] Add SBI v0.2 support for KVM Anup Patel
2020-12-01  1:06   ` Atish Patra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200803175846.26272-6-atish.patra@wdc.com \
    --to=atish.patra@wdc.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=anup.patel@wdc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=graf@amazon.com \
    --cc=kvm-riscv@lists.infradead.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=pbonzini@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=wangkefeng.wang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).