From: Samuel Thibault <samuel.thibault@ens-lyon.org> To: gregkh@linuxfoundation.org Cc: linux-kernel@vger.kernel.org, speakup@linux-speakup.org Subject: [PATCHv2 1/2] speakup: Fix wait_for_xmitr for ttyio case Date: Tue, 4 Aug 2020 18:06:37 +0200 Message-ID: <20200804160637.x3iycau5izywbgzl@function> (raw) This was missed while introducing the tty-based serial access. The only remaining use of wait_for_xmitr with tty-based access is in spk_synth_is_alive_restart to check whether the synth can be restarted. With tty-based this is up to the tty layer to cope with the buffering etc. so we can just say yes. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Index: linux-2.6/drivers/accessibility/speakup/serialio.c =================================================================== --- linux-2.6.orig/drivers/accessibility/speakup/serialio.c +++ linux-2.6/drivers/accessibility/speakup/serialio.c @@ -32,6 +32,7 @@ static void spk_serial_tiocmset(unsigned static unsigned char spk_serial_in(void); static unsigned char spk_serial_in_nowait(void); static void spk_serial_flush_buffer(void); +static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth); struct spk_io_ops spk_serial_io_ops = { .synth_out = spk_serial_out, @@ -40,6 +41,7 @@ struct spk_io_ops spk_serial_io_ops = { .synth_in = spk_serial_in, .synth_in_nowait = spk_serial_in_nowait, .flush_buffer = spk_serial_flush_buffer, + .wait_for_xmitr = spk_serial_wait_for_xmitr, }; EXPORT_SYMBOL_GPL(spk_serial_io_ops); @@ -211,7 +213,7 @@ void spk_stop_serial_interrupt(void) } EXPORT_SYMBOL_GPL(spk_stop_serial_interrupt); -int spk_wait_for_xmitr(struct spk_synth *in_synth) +static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth) { int tmout = SPK_XMITR_TIMEOUT; @@ -280,7 +282,7 @@ static void spk_serial_flush_buffer(void static int spk_serial_out(struct spk_synth *in_synth, const char ch) { - if (in_synth->alive && spk_wait_for_xmitr(in_synth)) { + if (in_synth->alive && spk_serial_wait_for_xmitr(in_synth)) { outb_p(ch, speakup_info.port_tts); return 1; } @@ -295,7 +297,7 @@ const char *spk_serial_synth_immediate(s while ((ch = *buff)) { if (ch == '\n') ch = synth->procspeech; - if (spk_wait_for_xmitr(synth)) + if (spk_serial_wait_for_xmitr(synth)) outb(ch, speakup_info.port_tts); else return buff; Index: linux-2.6/drivers/accessibility/speakup/spk_priv.h =================================================================== --- linux-2.6.orig/drivers/accessibility/speakup/spk_priv.h +++ linux-2.6/drivers/accessibility/speakup/spk_priv.h @@ -34,7 +34,6 @@ const struct old_serial_port *spk_serial_init(int index); void spk_stop_serial_interrupt(void); -int spk_wait_for_xmitr(struct spk_synth *in_synth); void spk_serial_release(void); void spk_ttyio_release(void); void spk_ttyio_register_ldisc(void); Index: linux-2.6/drivers/accessibility/speakup/spk_ttyio.c =================================================================== --- linux-2.6.orig/drivers/accessibility/speakup/spk_ttyio.c +++ linux-2.6/drivers/accessibility/speakup/spk_ttyio.c @@ -116,6 +116,7 @@ static void spk_ttyio_tiocmset(unsigned static unsigned char spk_ttyio_in(void); static unsigned char spk_ttyio_in_nowait(void); static void spk_ttyio_flush_buffer(void); +static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth); struct spk_io_ops spk_ttyio_ops = { .synth_out = spk_ttyio_out, @@ -125,6 +126,7 @@ struct spk_io_ops spk_ttyio_ops = { .synth_in = spk_ttyio_in, .synth_in_nowait = spk_ttyio_in_nowait, .flush_buffer = spk_ttyio_flush_buffer, + .wait_for_xmitr = spk_ttyio_wait_for_xmitr, }; EXPORT_SYMBOL_GPL(spk_ttyio_ops); @@ -286,6 +288,11 @@ static void spk_ttyio_tiocmset(unsigned mutex_unlock(&speakup_tty_mutex); } +static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth) +{ + return 1; +} + static unsigned char ttyio_in(int timeout) { struct spk_ldisc_data *ldisc_data = speakup_tty->disc_data; Index: linux-2.6/drivers/accessibility/speakup/spk_types.h =================================================================== --- linux-2.6.orig/drivers/accessibility/speakup/spk_types.h +++ linux-2.6/drivers/accessibility/speakup/spk_types.h @@ -158,6 +158,7 @@ struct spk_io_ops { unsigned char (*synth_in)(void); unsigned char (*synth_in_nowait)(void); void (*flush_buffer)(void); + int (*wait_for_xmitr)(struct spk_synth *synth); }; struct spk_synth { Index: linux-2.6/drivers/accessibility/speakup/synth.c =================================================================== --- linux-2.6.orig/drivers/accessibility/speakup/synth.c +++ linux-2.6/drivers/accessibility/speakup/synth.c @@ -159,7 +159,7 @@ int spk_synth_is_alive_restart(struct sp { if (synth->alive) return 1; - if (spk_wait_for_xmitr(synth) > 0) { + if (synth->io_ops->wait_for_xmitr(synth) > 0) { /* restart */ synth->alive = 1; synth_printf("%s", synth->init);
next reply index Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-04 16:06 Samuel Thibault [this message] 2020-08-04 16:06 ` [PATCHv2 2/2] speakup: only build serialio when ISA is enabled Samuel Thibault
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200804160637.x3iycau5izywbgzl@function \ --to=samuel.thibault@ens-lyon.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-kernel@vger.kernel.org \ --cc=speakup@linux-speakup.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git