* [PATCHv2 1/2] speakup: Fix wait_for_xmitr for ttyio case
@ 2020-08-04 16:06 Samuel Thibault
2020-08-04 16:06 ` [PATCHv2 2/2] speakup: only build serialio when ISA is enabled Samuel Thibault
0 siblings, 1 reply; 2+ messages in thread
From: Samuel Thibault @ 2020-08-04 16:06 UTC (permalink / raw)
To: gregkh; +Cc: linux-kernel, speakup
This was missed while introducing the tty-based serial access.
The only remaining use of wait_for_xmitr with tty-based access is in
spk_synth_is_alive_restart to check whether the synth can be restarted.
With tty-based this is up to the tty layer to cope with the buffering
etc. so we can just say yes.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Index: linux-2.6/drivers/accessibility/speakup/serialio.c
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/serialio.c
+++ linux-2.6/drivers/accessibility/speakup/serialio.c
@@ -32,6 +32,7 @@ static void spk_serial_tiocmset(unsigned
static unsigned char spk_serial_in(void);
static unsigned char spk_serial_in_nowait(void);
static void spk_serial_flush_buffer(void);
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth);
struct spk_io_ops spk_serial_io_ops = {
.synth_out = spk_serial_out,
@@ -40,6 +41,7 @@ struct spk_io_ops spk_serial_io_ops = {
.synth_in = spk_serial_in,
.synth_in_nowait = spk_serial_in_nowait,
.flush_buffer = spk_serial_flush_buffer,
+ .wait_for_xmitr = spk_serial_wait_for_xmitr,
};
EXPORT_SYMBOL_GPL(spk_serial_io_ops);
@@ -211,7 +213,7 @@ void spk_stop_serial_interrupt(void)
}
EXPORT_SYMBOL_GPL(spk_stop_serial_interrupt);
-int spk_wait_for_xmitr(struct spk_synth *in_synth)
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth)
{
int tmout = SPK_XMITR_TIMEOUT;
@@ -280,7 +282,7 @@ static void spk_serial_flush_buffer(void
static int spk_serial_out(struct spk_synth *in_synth, const char ch)
{
- if (in_synth->alive && spk_wait_for_xmitr(in_synth)) {
+ if (in_synth->alive && spk_serial_wait_for_xmitr(in_synth)) {
outb_p(ch, speakup_info.port_tts);
return 1;
}
@@ -295,7 +297,7 @@ const char *spk_serial_synth_immediate(s
while ((ch = *buff)) {
if (ch == '\n')
ch = synth->procspeech;
- if (spk_wait_for_xmitr(synth))
+ if (spk_serial_wait_for_xmitr(synth))
outb(ch, speakup_info.port_tts);
else
return buff;
Index: linux-2.6/drivers/accessibility/speakup/spk_priv.h
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/spk_priv.h
+++ linux-2.6/drivers/accessibility/speakup/spk_priv.h
@@ -34,7 +34,6 @@
const struct old_serial_port *spk_serial_init(int index);
void spk_stop_serial_interrupt(void);
-int spk_wait_for_xmitr(struct spk_synth *in_synth);
void spk_serial_release(void);
void spk_ttyio_release(void);
void spk_ttyio_register_ldisc(void);
Index: linux-2.6/drivers/accessibility/speakup/spk_ttyio.c
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/spk_ttyio.c
+++ linux-2.6/drivers/accessibility/speakup/spk_ttyio.c
@@ -116,6 +116,7 @@ static void spk_ttyio_tiocmset(unsigned
static unsigned char spk_ttyio_in(void);
static unsigned char spk_ttyio_in_nowait(void);
static void spk_ttyio_flush_buffer(void);
+static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth);
struct spk_io_ops spk_ttyio_ops = {
.synth_out = spk_ttyio_out,
@@ -125,6 +126,7 @@ struct spk_io_ops spk_ttyio_ops = {
.synth_in = spk_ttyio_in,
.synth_in_nowait = spk_ttyio_in_nowait,
.flush_buffer = spk_ttyio_flush_buffer,
+ .wait_for_xmitr = spk_ttyio_wait_for_xmitr,
};
EXPORT_SYMBOL_GPL(spk_ttyio_ops);
@@ -286,6 +288,11 @@ static void spk_ttyio_tiocmset(unsigned
mutex_unlock(&speakup_tty_mutex);
}
+static int spk_ttyio_wait_for_xmitr(struct spk_synth *in_synth)
+{
+ return 1;
+}
+
static unsigned char ttyio_in(int timeout)
{
struct spk_ldisc_data *ldisc_data = speakup_tty->disc_data;
Index: linux-2.6/drivers/accessibility/speakup/spk_types.h
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/spk_types.h
+++ linux-2.6/drivers/accessibility/speakup/spk_types.h
@@ -158,6 +158,7 @@ struct spk_io_ops {
unsigned char (*synth_in)(void);
unsigned char (*synth_in_nowait)(void);
void (*flush_buffer)(void);
+ int (*wait_for_xmitr)(struct spk_synth *synth);
};
struct spk_synth {
Index: linux-2.6/drivers/accessibility/speakup/synth.c
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/synth.c
+++ linux-2.6/drivers/accessibility/speakup/synth.c
@@ -159,7 +159,7 @@ int spk_synth_is_alive_restart(struct sp
{
if (synth->alive)
return 1;
- if (spk_wait_for_xmitr(synth) > 0) {
+ if (synth->io_ops->wait_for_xmitr(synth) > 0) {
/* restart */
synth->alive = 1;
synth_printf("%s", synth->init);
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCHv2 2/2] speakup: only build serialio when ISA is enabled
2020-08-04 16:06 [PATCHv2 1/2] speakup: Fix wait_for_xmitr for ttyio case Samuel Thibault
@ 2020-08-04 16:06 ` Samuel Thibault
0 siblings, 0 replies; 2+ messages in thread
From: Samuel Thibault @ 2020-08-04 16:06 UTC (permalink / raw)
To: gregkh; +Cc: linux-kernel, speakup
Drivers using serialio were already made available in Kconfig only under
the ISA condition.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Index: linux-2.6/drivers/accessibility/speakup/Makefile
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/Makefile
+++ linux-2.6/drivers/accessibility/speakup/Makefile
@@ -25,8 +25,8 @@ speakup-y := \
keyhelp.o \
kobjects.o \
selection.o \
- serialio.o \
spk_ttyio.o \
synth.o \
thread.o \
varhandlers.o
+speakup-$(CONFIG_SPEAKUP_SERIALIO) += serialio.o
Index: linux-2.6/drivers/accessibility/speakup/Kconfig
===================================================================
--- linux-2.6.orig/drivers/accessibility/speakup/Kconfig
+++ linux-2.6/drivers/accessibility/speakup/Kconfig
@@ -42,6 +42,11 @@ config SPEAKUP
one of the listed synthesizers, you should say n.
if SPEAKUP
+
+config SPEAKUP_SERIALIO
+ def_bool y
+ depends on ISA || COMPILE_TEST
+
config SPEAKUP_SYNTH_ACNTSA
tristate "Accent SA synthesizer support"
help
@@ -52,7 +57,7 @@ config SPEAKUP_SYNTH_ACNTSA
config SPEAKUP_SYNTH_ACNTPC
tristate "Accent PC synthesizer support"
- depends on ISA || COMPILE_TEST
+ depends on SPEAKUP_SERIALIO
help
This is the Speakup driver for the accent pc
synthesizer. You can say y to build it into the kernel,
@@ -104,7 +109,7 @@ config SPEAKUP_SYNTH_DECEXT
config SPEAKUP_SYNTH_DECPC
depends on m
- depends on ISA || COMPILE_TEST
+ depends on SPEAKUP_SERIALIO
tristate "DECtalk PC (big ISA card) synthesizer support"
help
@@ -127,7 +132,7 @@ config SPEAKUP_SYNTH_DECPC
config SPEAKUP_SYNTH_DTLK
tristate "DoubleTalk PC synthesizer support"
- depends on ISA || COMPILE_TEST
+ depends on SPEAKUP_SERIALIO
help
This is the Speakup driver for the internal DoubleTalk
@@ -138,7 +143,7 @@ config SPEAKUP_SYNTH_DTLK
config SPEAKUP_SYNTH_KEYPC
tristate "Keynote Gold PC synthesizer support"
- depends on ISA || COMPILE_TEST
+ depends on SPEAKUP_SERIALIO
help
This is the Speakup driver for the Keynote Gold
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-08-04 16:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-04 16:06 [PATCHv2 1/2] speakup: Fix wait_for_xmitr for ttyio case Samuel Thibault
2020-08-04 16:06 ` [PATCHv2 2/2] speakup: only build serialio when ISA is enabled Samuel Thibault
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).