* [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
@ 2020-08-05 13:02 Patrick Riphagen
2020-08-06 8:24 ` Frans Klaver
0 siblings, 1 reply; 6+ messages in thread
From: Patrick Riphagen @ 2020-08-05 13:02 UTC (permalink / raw)
To: Johan Hovold, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: patrick.riphagen
The device added has an FTDI chip inside.
The device is used to connect Xsens USB Motion Trackers.
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ad44a96dfe3..2c08cad32f1d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e8373528264c..b5ca17a5967a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -160,6 +160,7 @@
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
2020-08-05 13:02 [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter Patrick Riphagen
@ 2020-08-06 8:24 ` Frans Klaver
0 siblings, 0 replies; 6+ messages in thread
From: Frans Klaver @ 2020-08-06 8:24 UTC (permalink / raw)
To: Patrick Riphagen
Cc: Johan Hovold, Greg Kroah-Hartman, linux-usb, linux-kernel,
Patrick Riphagen
Hi Patrick,
On Wed, Aug 5, 2020 at 9:57 PM Patrick Riphagen <ppriphagen@gmail.com> wrote:
>
> The device added has an FTDI chip inside.
> The device is used to connect Xsens USB Motion Trackers.
>
> Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Now you've dropped the backport to stable. Just put
Cc: stable@vger.kernel.org
just before your sign-off. Everything will be taken care of
automatically once the patch is merged.
Frans
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
2020-08-06 9:02 Patrick Riphagen
@ 2020-08-06 11:42 ` Johan Hovold
0 siblings, 0 replies; 6+ messages in thread
From: Johan Hovold @ 2020-08-06 11:42 UTC (permalink / raw)
To: Patrick Riphagen
Cc: Johan Hovold, Greg Kroah-Hartman, linux-usb, linux-kernel,
patrick.riphagen, stable
On Thu, Aug 06, 2020 at 11:02:34AM +0200, Patrick Riphagen wrote:
> The device added has an FTDI chip inside.
> The device is used to connect Xsens USB Motion Trackers.
>
> Cc: stable@vger.kernel.org
> Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
> ---
Almost there; would you mind resending with an added From: line before
the commit message so that the authorship matches the SoB?
Also, whenever you update a patch, please add a version number in the
Subject line (e.g. "[PATCH v2]: USB: serial: ...") so we can keep track
of which version is the latest one. You should also include a short
changelog here under the "---" line so we know what changed.
Thanks,
Johan
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
@ 2020-08-06 9:02 Patrick Riphagen
2020-08-06 11:42 ` Johan Hovold
0 siblings, 1 reply; 6+ messages in thread
From: Patrick Riphagen @ 2020-08-06 9:02 UTC (permalink / raw)
To: Johan Hovold, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: patrick.riphagen, stable
The device added has an FTDI chip inside.
The device is used to connect Xsens USB Motion Trackers.
Cc: stable@vger.kernel.org
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ad44a96dfe3..2c08cad32f1d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e8373528264c..b5ca17a5967a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -160,6 +160,7 @@
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
2020-08-05 10:05 Patrick Riphagen
@ 2020-08-05 10:12 ` Greg Kroah-Hartman
0 siblings, 0 replies; 6+ messages in thread
From: Greg Kroah-Hartman @ 2020-08-05 10:12 UTC (permalink / raw)
To: Patrick Riphagen
Cc: stable, patrick.riphagen, Johan Hovold, linux-usb, linux-kernel
On Wed, Aug 05, 2020 at 12:05:57PM +0200, Patrick Riphagen wrote:
> The device added has an FTDI chip inside.
> The device is used to connect Xsens USB Motion Trackers.
>
> Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
> ---
> drivers/usb/serial/ftdi_sio.c | 1 +
> drivers/usb/serial/ftdi_sio_ids.h | 1 +
> 2 files changed, 2 insertions(+)
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
@ 2020-08-05 10:05 Patrick Riphagen
2020-08-05 10:12 ` Greg Kroah-Hartman
0 siblings, 1 reply; 6+ messages in thread
From: Patrick Riphagen @ 2020-08-05 10:05 UTC (permalink / raw)
To: stable
Cc: patrick.riphagen, Johan Hovold, Greg Kroah-Hartman, linux-usb,
linux-kernel
The device added has an FTDI chip inside.
The device is used to connect Xsens USB Motion Trackers.
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9ad44a96dfe3..2c08cad32f1d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e8373528264c..b5ca17a5967a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -160,6 +160,7 @@
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-08-06 17:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-05 13:02 [PATCH] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter Patrick Riphagen
2020-08-06 8:24 ` Frans Klaver
-- strict thread matches above, loose matches on Subject: below --
2020-08-06 9:02 Patrick Riphagen
2020-08-06 11:42 ` Johan Hovold
2020-08-05 10:05 Patrick Riphagen
2020-08-05 10:12 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).