* [PATCH 0/4] MIPS: BCM63xx: board improvements
@ 2020-08-07 9:38 Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 1/4] MIPS: BCM63xx: remove duplicated new lines Álvaro Fernández Rojas
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Álvaro Fernández Rojas @ 2020-08-07 9:38 UTC (permalink / raw)
To: tsbogend, f.fainelli, jonas.gorski, bcm-kernel-feedback-list,
linux-mips, linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
Theses patches improve BCM63xx board declarations and source code.
Álvaro Fernández Rojas (4):
MIPS: BCM63xx: remove duplicated new lines
MIPS: BCM63xx: remove EHCI from BCM6348 boards
MIPS: BCM63xx: enable EHCI for DWV-S0 board
MIPS: BCM63xx: refactor board declarations
arch/mips/bcm63xx/boards/board_bcm963xx.c | 622 +++++++++++-----------
1 file changed, 306 insertions(+), 316 deletions(-)
--
2.27.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/4] MIPS: BCM63xx: remove duplicated new lines
2020-08-07 9:38 [PATCH 0/4] MIPS: BCM63xx: board improvements Álvaro Fernández Rojas
@ 2020-08-07 9:38 ` Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 2/4] MIPS: BCM63xx: remove EHCI from BCM6348 boards Álvaro Fernández Rojas
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Álvaro Fernández Rojas @ 2020-08-07 9:38 UTC (permalink / raw)
To: tsbogend, f.fainelli, jonas.gorski, bcm-kernel-feedback-list,
linux-mips, linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
There are 3 duplicated new lines, let's remove them.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 230bf27c1fb8..744aa16bab12 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -32,7 +32,6 @@
#include <uapi/linux/bcm933xx_hcs.h>
-
#define HCS_OFFSET_128K 0x20000
static struct board_info board;
@@ -337,7 +336,6 @@ static struct board_info __initdata board_96348gw_11 = {
.force_duplex_full = 1,
},
-
.has_ohci0 = 1,
.has_pccard = 1,
.has_ehci0 = 1,
@@ -580,7 +578,6 @@ static struct board_info __initdata board_96358vw2 = {
.force_duplex_full = 1,
},
-
.has_ohci0 = 1,
.has_pccard = 1,
.has_ehci0 = 1,
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/4] MIPS: BCM63xx: remove EHCI from BCM6348 boards
2020-08-07 9:38 [PATCH 0/4] MIPS: BCM63xx: board improvements Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 1/4] MIPS: BCM63xx: remove duplicated new lines Álvaro Fernández Rojas
@ 2020-08-07 9:38 ` Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 3/4] MIPS: BCM63xx: enable EHCI for DWV-S0 board Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 4/4] MIPS: BCM63xx: refactor board declarations Álvaro Fernández Rojas
3 siblings, 0 replies; 6+ messages in thread
From: Álvaro Fernández Rojas @ 2020-08-07 9:38 UTC (permalink / raw)
To: tsbogend, f.fainelli, jonas.gorski, bcm-kernel-feedback-list,
linux-mips, linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
There's no EHCI controller on BCM6348.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 744aa16bab12..45f1bc437245 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -285,7 +285,6 @@ static struct board_info __initdata board_96348gw_10 = {
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
.leds = {
{
@@ -338,7 +337,6 @@ static struct board_info __initdata board_96348gw_11 = {
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
.leds = {
{
@@ -441,7 +439,6 @@ static struct board_info __initdata board_FAST2404 = {
.has_ohci0 = 1,
.has_pccard = 1,
- .has_ehci0 = 1,
};
static struct board_info __initdata board_rta1025w_16 = {
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] MIPS: BCM63xx: enable EHCI for DWV-S0 board
2020-08-07 9:38 [PATCH 0/4] MIPS: BCM63xx: board improvements Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 1/4] MIPS: BCM63xx: remove duplicated new lines Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 2/4] MIPS: BCM63xx: remove EHCI from BCM6348 boards Álvaro Fernández Rojas
@ 2020-08-07 9:38 ` Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 4/4] MIPS: BCM63xx: refactor board declarations Álvaro Fernández Rojas
3 siblings, 0 replies; 6+ messages in thread
From: Álvaro Fernández Rojas @ 2020-08-07 9:38 UTC (permalink / raw)
To: tsbogend, f.fainelli, jonas.gorski, bcm-kernel-feedback-list,
linux-mips, linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
EHCI and OHCI share the same USB ports. Therefore, if the board has OHCI
it should also have EHCI.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 45f1bc437245..ac9570b66f37 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -645,6 +645,7 @@ static struct board_info __initdata board_DWVS0 = {
},
.has_ohci0 = 1,
+ .has_ehci0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6358 */
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/4] MIPS: BCM63xx: refactor board declarations
2020-08-07 9:38 [PATCH 0/4] MIPS: BCM63xx: board improvements Álvaro Fernández Rojas
` (2 preceding siblings ...)
2020-08-07 9:38 ` [PATCH 3/4] MIPS: BCM63xx: enable EHCI for DWV-S0 board Álvaro Fernández Rojas
@ 2020-08-07 9:38 ` Álvaro Fernández Rojas
2020-08-07 9:41 ` Jiaxun Yang
3 siblings, 1 reply; 6+ messages in thread
From: Álvaro Fernández Rojas @ 2020-08-07 9:38 UTC (permalink / raw)
To: tsbogend, f.fainelli, jonas.gorski, bcm-kernel-feedback-list,
linux-mips, linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
Current board declarations are a mess. Let's put some order and make them
follow the same structure.
Also remove board declarations tabs and double whitespace in the header.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 617 +++++++++++-----------
1 file changed, 306 insertions(+), 311 deletions(-)
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index ac9570b66f37..36dd356374b1 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1,6 +1,6 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
+ * License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
@@ -41,30 +41,28 @@ static struct board_info board;
*/
#ifdef CONFIG_BCM63XX_CPU_3368
static struct board_info __initdata board_cvg834g = {
- .name = "CVG834G_E15R3921",
- .expected_cpu_id = 0x3368,
+ .name = "CVG834G_E15R3921",
+ .expected_cpu_id = 0x3368,
- .has_uart0 = 1,
- .has_uart1 = 1,
-
- .has_enet0 = 1,
- .has_pci = 1,
+ .ephy_reset_gpio = 36,
+ .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_uart1 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
.leds = {
{
- .name = "CVG834G:green:power",
- .gpio = 37,
+ .name = "CVG834G:green:power",
+ .gpio = 37,
.default_trigger= "default-on",
},
},
-
- .ephy_reset_gpio = 36,
- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH,
};
#endif /* CONFIG_BCM63XX_CPU_3368 */
@@ -73,44 +71,44 @@ static struct board_info __initdata board_cvg834g = {
*/
#ifdef CONFIG_BCM63XX_CPU_6328
static struct board_info __initdata board_96328avng = {
- .name = "96328avng",
- .expected_cpu_id = 0x6328,
+ .name = "96328avng",
+ .expected_cpu_id = 0x6328,
- .has_uart0 = 1,
- .has_pci = 1,
- .has_usbd = 0,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_usbd = 0,
.usbd = {
- .use_fullspeed = 0,
- .port_no = 0,
+ .use_fullspeed = 0,
+ .port_no = 0,
},
.leds = {
{
- .name = "96328avng::ppp-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "96328avng::ppp-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "96328avng::power",
- .gpio = 4,
- .active_low = 1,
+ .name = "96328avng::power",
+ .gpio = 4,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "96328avng::power-fail",
- .gpio = 8,
- .active_low = 1,
+ .name = "96328avng::power-fail",
+ .gpio = 8,
+ .active_low = 1,
},
{
- .name = "96328avng::wps",
- .gpio = 9,
- .active_low = 1,
+ .name = "96328avng::wps",
+ .gpio = 9,
+ .active_low = 1,
},
{
- .name = "96328avng::ppp",
- .gpio = 11,
- .active_low = 1,
+ .name = "96328avng::ppp",
+ .gpio = 11,
+ .active_low = 1,
},
},
};
@@ -121,85 +119,86 @@ static struct board_info __initdata board_96328avng = {
*/
#ifdef CONFIG_BCM63XX_CPU_6338
static struct board_info __initdata board_96338gw = {
- .name = "96338GW",
- .expected_cpu_id = 0x6338,
+ .name = "96338GW",
+ .expected_cpu_id = 0x6338,
+
+ .has_ohci0 = 1,
+ .has_uart0 = 1,
- .has_uart0 = 1,
- .has_enet0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
-
.leds = {
{
- .name = "adsl",
- .gpio = 3,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ses",
- .gpio = 5,
- .active_low = 1,
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
}
},
};
static struct board_info __initdata board_96338w = {
- .name = "96338W",
- .expected_cpu_id = 0x6338,
+ .name = "96338W",
+ .expected_cpu_id = 0x6338,
+
+ .has_uart0 = 1,
- .has_uart0 = 1,
- .has_enet0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
.leds = {
{
- .name = "adsl",
- .gpio = 3,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ses",
- .gpio = 5,
- .active_low = 1,
+ .name = "ses",
+ .gpio = 5,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
@@ -210,10 +209,10 @@ static struct board_info __initdata board_96338w = {
*/
#ifdef CONFIG_BCM63XX_CPU_6345
static struct board_info __initdata board_96345gw2 = {
- .name = "96345GW2",
- .expected_cpu_id = 0x6345,
+ .name = "96345GW2",
+ .expected_cpu_id = 0x6345,
- .has_uart0 = 1,
+ .has_uart0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6345 */
@@ -222,282 +221,282 @@ static struct board_info __initdata board_96345gw2 = {
*/
#ifdef CONFIG_BCM63XX_CPU_6348
static struct board_info __initdata board_96348r = {
- .name = "96348R",
- .expected_cpu_id = 0x6348,
+ .name = "96348R",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_pci = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw_10 = {
- .name = "96348GW-10",
- .expected_cpu_id = 0x6348,
+ .name = "96348GW-10",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
- .has_pccard = 1,
-
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw_11 = {
- .name = "96348GW-11",
- .expected_cpu_id = 0x6348,
+ .name = "96348GW-11",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
- .has_pccard = 1,
-
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
+ .name = "96348GW",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
-
.leds = {
{
- .name = "adsl-fail",
- .gpio = 2,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 2,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 3,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 4,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 0,
- .active_low = 1,
+ .name = "power",
+ .gpio = 0,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 1,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 1,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
+ .name = "F@ST2404",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
- .has_pccard = 1,
};
static struct board_info __initdata board_rta1025w_16 = {
- .name = "RTA1025W_16",
- .expected_cpu_id = 0x6348,
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_pci = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
};
static struct board_info __initdata board_DV201AMR = {
- .name = "DV201AMR",
- .expected_cpu_id = 0x6348,
+ .name = "DV201AMR",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_pci = 1,
- .has_ohci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
};
static struct board_info __initdata board_96348gw_a = {
- .name = "96348GW-A",
- .expected_cpu_id = 0x6348,
+ .name = "96348GW-A",
+ .expected_cpu_id = 0x6348,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6348 */
@@ -506,146 +505,142 @@ static struct board_info __initdata board_96348gw_a = {
*/
#ifdef CONFIG_BCM63XX_CPU_6358
static struct board_info __initdata board_96358vw = {
- .name = "96358VW",
- .expected_cpu_id = 0x6358,
+ .name = "96358VW",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
-
.leds = {
{
- .name = "adsl-fail",
- .gpio = 15,
- .active_low = 1,
+ .name = "adsl-fail",
+ .gpio = 15,
+ .active_low = 1,
},
{
- .name = "ppp",
- .gpio = 22,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 22,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 23,
- .active_low = 1,
+ .name = "ppp-fail",
+ .gpio = 23,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 4,
+ .name = "power",
+ .gpio = 4,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 5,
+ .name = "stop",
+ .gpio = 5,
},
},
};
static struct board_info __initdata board_96358vw2 = {
- .name = "96358VW2",
- .expected_cpu_id = 0x6358,
+ .name = "96358VW2",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pccard = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
- .has_ohci0 = 1,
- .has_pccard = 1,
- .has_ehci0 = 1,
-
.leds = {
{
- .name = "adsl",
- .gpio = 22,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 22,
+ .active_low = 1,
},
{
- .name = "ppp-fail",
- .gpio = 23,
+ .name = "ppp-fail",
+ .gpio = 23,
},
{
- .name = "power",
- .gpio = 5,
- .active_low = 1,
+ .name = "power",
+ .gpio = 5,
+ .active_low = 1,
.default_trigger = "default-on",
},
{
- .name = "stop",
- .gpio = 4,
- .active_low = 1,
+ .name = "stop",
+ .gpio = 4,
+ .active_low = 1,
},
},
};
static struct board_info __initdata board_AGPFS0 = {
- .name = "AGPF-S0",
- .expected_cpu_id = 0x6358,
+ .name = "AGPF-S0",
+ .expected_cpu_id = 0x6358,
- .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
- .has_ehci0 = 1,
};
static struct board_info __initdata board_DWVS0 = {
- .name = "DWV-S0",
- .expected_cpu_id = 0x6358,
+ .name = "DWV-S0",
+ .expected_cpu_id = 0x6358,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .has_pci = 1,
+ .has_enet0 = 1,
.enet0 = {
- .has_phy = 1,
- .use_internal_phy = 1,
+ .has_phy = 1,
+ .use_internal_phy = 1,
},
+ .has_enet1 = 1,
.enet1 = {
- .force_speed_100 = 1,
- .force_duplex_full = 1,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
},
-
- .has_ohci0 = 1,
- .has_ehci0 = 1,
};
#endif /* CONFIG_BCM63XX_CPU_6358 */
--
2.27.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 4/4] MIPS: BCM63xx: refactor board declarations
2020-08-07 9:38 ` [PATCH 4/4] MIPS: BCM63xx: refactor board declarations Álvaro Fernández Rojas
@ 2020-08-07 9:41 ` Jiaxun Yang
0 siblings, 0 replies; 6+ messages in thread
From: Jiaxun Yang @ 2020-08-07 9:41 UTC (permalink / raw)
To: Álvaro Fernández Rojas, tsbogend, f.fainelli,
jonas.gorski, bcm-kernel-feedback-list, linux-mips,
linux-arm-kernel, linux-kernel
在 2020/8/7 下午5:38, Álvaro Fernández Rojas 写道:
> Current board declarations are a mess. Let's put some order and make them
> follow the same structure.
> Also remove board declarations tabs and double whitespace in the header.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
> ---
> arch/mips/bcm63xx/boards/board_bcm963xx.c | 617 +++++++++++-----------
> 1 file changed, 306 insertions(+), 311 deletions(-)
>
> diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> index ac9570b66f37..36dd356374b1 100644
> --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
> +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
> @@ -1,6 +1,6 @@
> /*
> * This file is subject to the terms and conditions of the GNU General Public
> - * License. See the file "COPYING" in the main directory of this archive
> + * License. See the file "COPYING" in the main directory of this archive
You'd better replace licenses text with SPDX identifier.
> * for more details.
> *
> * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
> @@ -41,30 +41,28 @@ static struct board_info board;
> */
>
Thanks
- Jiaxun
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-08-07 9:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-07 9:38 [PATCH 0/4] MIPS: BCM63xx: board improvements Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 1/4] MIPS: BCM63xx: remove duplicated new lines Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 2/4] MIPS: BCM63xx: remove EHCI from BCM6348 boards Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 3/4] MIPS: BCM63xx: enable EHCI for DWV-S0 board Álvaro Fernández Rojas
2020-08-07 9:38 ` [PATCH 4/4] MIPS: BCM63xx: refactor board declarations Álvaro Fernández Rojas
2020-08-07 9:41 ` Jiaxun Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).