[PATCH] arch/arm: use simple i2c probe function

[PATCH] arch/arm: use simple i2c probe function

[Stephen Kitt]

The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.

This avoids scanning the identifier tables during probes.

Signed-off-by: Stephen Kitt <steve@sk2.org>
---
 arch/arm/mach-davinci/board-dm644x-evm.c     |  5 ++---
 arch/arm/mach-davinci/board-dm646x-evm.c     | 10 ++++------
 arch/arm/mach-s3c64xx/mach-crag6410-module.c |  5 ++---
 3 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a5d3708fedf6..d0dcf69cc76d 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -548,8 +548,7 @@ static const struct property_entry eeprom_properties[] = {
  */
 static struct i2c_client *dm6446evm_msp;
 
-static int dm6446evm_msp_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
+static int dm6446evm_msp_probe(struct i2c_client *client)
 {
 	dm6446evm_msp = client;
 	return 0;
@@ -569,7 +568,7 @@ static const struct i2c_device_id dm6446evm_msp_ids[] = {
 static struct i2c_driver dm6446evm_msp_driver = {
 	.driver.name	= "dm6446evm_msp",
 	.id_table	= dm6446evm_msp_ids,
-	.probe		= dm6446evm_msp_probe,
+	.probe_new	= dm6446evm_msp_probe,
 	.remove		= dm6446evm_msp_remove,
 };
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..2dce16fff77e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -160,8 +160,7 @@ static struct platform_device davinci_aemif_device = {
 #define DM646X_EVM_ATA_PWD		BIT(1)
 
 /* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
+static int cpld_reg0_probe(struct i2c_client *client)
 {
 	if (HAS_ATA) {
 		u8 data;
@@ -197,7 +196,7 @@ static const struct i2c_device_id cpld_reg_ids[] = {
 static struct i2c_driver dm6467evm_cpld_driver = {
 	.driver.name	= "cpld_reg0",
 	.id_table	= cpld_reg_ids,
-	.probe		= cpld_reg0_probe,
+	.probe_new	= cpld_reg0_probe,
 };
 
 /* LEDS */
@@ -402,8 +401,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 #ifdef CONFIG_I2C
 static struct i2c_client *cpld_client;
 
-static int cpld_video_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int cpld_video_probe(struct i2c_client *client)
 {
 	cpld_client = client;
 	return 0;
@@ -424,7 +422,7 @@ static struct i2c_driver cpld_video_driver = {
 	.driver = {
 		.name	= "cpld_video",
 	},
-	.probe		= cpld_video_probe,
+	.probe_new	= cpld_video_probe,
 	.remove		= cpld_video_remove,
 	.id_table	= cpld_video_id,
 };
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 34f1baa10c54..43b587e79d21 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -378,8 +378,7 @@ static const struct {
 	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
 };
 
-static int wlf_gf_module_probe(struct i2c_client *i2c,
-			       const struct i2c_device_id *i2c_id)
+static int wlf_gf_module_probe(struct i2c_client *i2c)
 {
 	int ret, i, j, id, rev;
 
@@ -432,7 +431,7 @@ static struct i2c_driver wlf_gf_module_driver = {
 	.driver = {
 		.name = "wlf-gf-module"
 	},
-	.probe = wlf_gf_module_probe,
+	.probe_new = wlf_gf_module_probe,
 	.id_table = wlf_gf_module_id,
 };
 
-- 
2.25.4

Re: [PATCH] arch/arm: use simple i2c probe function

[Krzysztof Kozlowski]

On Fri, Aug 07, 2020 at 05:31:00PM +0200, Stephen Kitt wrote:
> The i2c probe functions here don't use the id information provided in
> their second argument, so the single-parameter i2c probe function
> ("probe_new") can be used instead.
> 
> This avoids scanning the identifier tables during probes.
> 
> Signed-off-by: Stephen Kitt <steve@sk2.org>
> ---
>  arch/arm/mach-davinci/board-dm644x-evm.c     |  5 ++---
>  arch/arm/mach-davinci/board-dm646x-evm.c     | 10 ++++------
>  arch/arm/mach-s3c64xx/mach-crag6410-module.c |  5 ++---
>  3 files changed, 8 insertions(+), 12 deletions(-)
> 

Hi,

You need to split it per sub architecture maintainers.  The subject
prefix is then for example: "ARM: s3c64xx: ".

Best regards,
Krzysztof

Re: [PATCH] arch/arm: use simple i2c probe function

[Stephen Kitt]

[-- Attachment #1: Type: text/plain, Size: 887 bytes --]

Hi,

On Sun, 9 Aug 2020 10:38:58 +0200, Krzysztof Kozlowski <krzk@kernel.org>
wrote:
> On Fri, Aug 07, 2020 at 05:31:00PM +0200, Stephen Kitt wrote:
> > The i2c probe functions here don't use the id information provided in
> > their second argument, so the single-parameter i2c probe function
> > ("probe_new") can be used instead.
> > 
> > This avoids scanning the identifier tables during probes.
> > 
> > Signed-off-by: Stephen Kitt <steve@sk2.org>
> > ---
> >  arch/arm/mach-davinci/board-dm644x-evm.c     |  5 ++---
> >  arch/arm/mach-davinci/board-dm646x-evm.c     | 10 ++++------
> >  arch/arm/mach-s3c64xx/mach-crag6410-module.c |  5 ++---
> >  3 files changed, 8 insertions(+), 12 deletions(-)
> 
> You need to split it per sub architecture maintainers.  The subject
> prefix is then for example: "ARM: s3c64xx: ".

Thanks, will do!

Regards,

Stephen

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]