[PATCH AUTOSEL 4.4 1/5] EDAC: Fix reference count leaks

[PATCH AUTOSEL 4.4 1/5] EDAC: Fix reference count leaks

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ]

When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.

Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.

 [ bp: Massage and merge into a single patch. ]

Fixes: b2ed215a3338 ("Kobject: change drivers/edac to use kobject_init_and_add")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu
Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_device_sysfs.c | 1 +
 drivers/edac/edac_pci_sysfs.c    | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index fb68a06ad6837..18991cfec2af4 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -280,6 +280,7 @@ int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev)
 
 	/* Error exit stack */
 err_kobj_reg:
+	kobject_put(&edac_dev->kobj);
 	module_put(edac_dev->owner);
 
 err_mod_get:
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index 24d877f6e5775..c56128402bc67 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -394,7 +394,7 @@ static int edac_pci_main_kobj_setup(void)
 
 	/* Error unwind statck */
 kobject_init_and_add_fail:
-	kfree(edac_pci_top_main_kobj);
+	kobject_put(edac_pci_top_main_kobj);
 
 kzalloc_fail:
 	module_put(THIS_MODULE);
-- 
2.25.1

[PATCH AUTOSEL 4.4 2/5] m68k: mac: Don't send IOP message until channel is idle

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit aeb445bf2194d83e12e85bf5c65baaf1f093bd8f ]

In the following sequence of calls, iop_do_send() gets called when the
"send" channel is not in the IOP_MSG_IDLE state:

	iop_ism_irq()
		iop_handle_send()
			(msg->handler)()
				iop_send_message()
			iop_do_send()

Avoid this by testing the channel state before calling iop_do_send().

When sending, and iop_send_queue is empty, call iop_do_send() because
the channel is idle. If iop_send_queue is not empty, iop_do_send() will
get called later by iop_handle_send().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/6d667c39e53865661fa5a48f16829d18ed8abe54.1590880333.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/mac/iop.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 4d2adfb32a2ab..c89ed66908f91 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -416,7 +416,8 @@ static void iop_handle_send(uint iop_num, uint chan)
 	iop_free_msg(msg2);
 
 	iop_send_queue[iop_num][chan] = msg;
-	if (msg) iop_do_send(msg);
+	if (msg && iop_readb(iop, IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE)
+		iop_do_send(msg);
 }
 
 /*
@@ -497,16 +498,12 @@ int iop_send_message(uint iop_num, uint chan, void *privdata,
 
 	if (!(q = iop_send_queue[iop_num][chan])) {
 		iop_send_queue[iop_num][chan] = msg;
+		iop_do_send(msg);
 	} else {
 		while (q->next) q = q->next;
 		q->next = msg;
 	}
 
-	if (iop_readb(iop_base[iop_num],
-	    IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE) {
-		iop_do_send(msg);
-	}
-
 	return 0;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.4 3/5] m68k: mac: Fix IOP status/control register writes

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit 931fc82a6aaf4e2e4a5490addaa6a090d78c24a7 ]

When writing values to the IOP status/control register make sure those
values do not have any extraneous bits that will clear interrupt flags.

To place the SCC IOP into bypass mode would be desirable but this is not
achieved by writing IOP_DMAINACTIVE | IOP_RUN | IOP_AUTOINC | IOP_BYPASS
to the control register. Drop this ineffective register write.

Remove the flawed and unused iop_bypass() function. Make use of the
unused iop_stop() function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/09bcb7359a1719a18b551ee515da3c4c3cf709e6.1590880333.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/mac/iop.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index c89ed66908f91..358ca965cf824 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -173,7 +173,7 @@ static __inline__ void iop_writeb(volatile struct mac_iop *iop, __u16 addr, __u8
 
 static __inline__ void iop_stop(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl &= ~IOP_RUN;
+	iop->status_ctrl = IOP_AUTOINC;
 }
 
 static __inline__ void iop_start(volatile struct mac_iop *iop)
@@ -181,14 +181,9 @@ static __inline__ void iop_start(volatile struct mac_iop *iop)
 	iop->status_ctrl = IOP_RUN | IOP_AUTOINC;
 }
 
-static __inline__ void iop_bypass(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl |= IOP_BYPASS;
-}
-
 static __inline__ void iop_interrupt(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl |= IOP_IRQ;
+	iop->status_ctrl = IOP_IRQ | IOP_RUN | IOP_AUTOINC;
 }
 
 static int iop_alive(volatile struct mac_iop *iop)
@@ -239,7 +234,6 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_SCC]->status_ctrl = 0x87;
 		iop_scc_present = 1;
 	} else {
 		iop_base[IOP_NUM_SCC] = NULL;
@@ -251,7 +245,7 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_ISM]->status_ctrl = 0;
+		iop_stop(iop_base[IOP_NUM_ISM]);
 		iop_ism_present = 1;
 	} else {
 		iop_base[IOP_NUM_ISM] = NULL;
-- 
2.25.1

[PATCH AUTOSEL 4.4 4/5] ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()

[Sasha Levin]

From: yu kuai <yukuai3@huawei.com>

[ Upstream commit f87a4f022c44e5b87e842a9f3e644fba87e8385f ]

if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have
a corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.

Fixes: d2e467905596 ("ARM: at91: pm: use the mmio-sram pool to access SRAM")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200604123301.3905837-1-yukuai3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-at91/pm.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 84eefbc2b4f93..5923f2ca510be 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -393,13 +393,13 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
@@ -407,12 +407,17 @@ static void __init at91_pm_sram_init(void)
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static void __init at91_pm_init(void)
-- 
2.25.1

[PATCH AUTOSEL 4.4 5/5] ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()

[Sasha Levin]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 3ad7b4e8f89d6bcc9887ca701cf2745a6aedb1a0 ]

if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.

Fixes: 44fd8c7d4005 ("ARM: socfpga: support suspend to ram")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-socfpga/pm.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index c378ab0c24317..93f2245c97750 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -60,14 +60,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -78,7 +78,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -92,6 +92,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 
-- 
2.25.1