[PATCH 00/14] mips: bmips: include dt-bindings headers

[PATCH 00/14] mips: bmips: include dt-bindings headers

[Álvaro Fernández Rojas]

Allow including dt-bindings header files and use them for bcm63xx.

Álvaro Fernández Rojas (14):
  mips: dts: brcm: allow including header files
  mips: bmips: add BCM3368 irq definitions
  mips: bmips: add BCM6318 irq definitions
  mips: bmips: add BCM6328 irq definitions
  mips: bmips: add BCM6358 irq definitions
  mips: bmips: add BCM6362 irq definitions
  mips: bmips: add BCM6368 irq definitions
  mips: bmips: add BCM63268 irq definitions
  mips: bmips: bcm3368: include and use dt-bindings
  mips: bmips: bcm6328: include and use dt-bindings
  mips: bmips: bcm6358: include and use dt-bindings
  mips: bmips: bcm6362: include and use dt-bindings
  mips: bmips: bcm6368: include and use dt-bindings
  mips: bmips: bcm63268: include and use dt-bindings

 .../boot/dts/brcm/bcm3368-netgear-cvg834g.dts |  2 +-
 arch/mips/boot/dts/brcm/bcm3368.dtsi          |  8 +-
 .../dts/brcm/bcm63268-comtrend-vr-3032u.dts   |  2 +-
 arch/mips/boot/dts/brcm/bcm63268.dtsi         | 12 ++-
 arch/mips/boot/dts/brcm/bcm6328.dtsi          | 12 ++-
 .../dts/brcm/bcm6358-neufbox4-sercomm.dts     |  2 +-
 arch/mips/boot/dts/brcm/bcm6358.dtsi          | 12 ++-
 .../dts/brcm/bcm6362-neufbox6-sercomm.dts     |  2 +-
 arch/mips/boot/dts/brcm/bcm6362.dtsi          | 12 ++-
 arch/mips/boot/dts/brcm/bcm6368.dtsi          | 12 ++-
 arch/mips/boot/dts/brcm/bcm93384wvg.dts       |  2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts |  2 +-
 arch/mips/boot/dts/brcm/bcm96368mvwg.dts      |  2 +-
 arch/mips/boot/dts/brcm/bcm97125cbmb.dts      |  2 +-
 arch/mips/boot/dts/brcm/bcm97346dbsmb.dts     |  4 +-
 arch/mips/boot/dts/brcm/bcm97358svmb.dts      |  4 +-
 arch/mips/boot/dts/brcm/bcm97360svmb.dts      |  2 +-
 arch/mips/boot/dts/brcm/bcm97362svmb.dts      |  4 +-
 arch/mips/boot/dts/brcm/bcm97420c.dts         |  2 +-
 arch/mips/boot/dts/brcm/bcm97425svmb.dts      |  4 +-
 arch/mips/boot/dts/brcm/bcm97435svmb.dts      |  4 +-
 arch/mips/boot/dts/brcm/bcm9ejtagprb.dts      |  2 +-
 .../bcm3368-interrupt-controller.h            | 19 ++++
 .../bcm6318-interrupt-controller.h            | 84 ++++++++++++++++++
 .../bcm63268-interrupt-controller.h           | 86 +++++++++++++++++++
 .../bcm6328-interrupt-controller.h            | 68 +++++++++++++++
 .../bcm6358-interrupt-controller.h            | 38 ++++++++
 .../bcm6362-interrupt-controller.h            | 71 +++++++++++++++
 .../bcm6368-interrupt-controller.h            | 71 +++++++++++++++
 29 files changed, 504 insertions(+), 43 deletions(-)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h

-- 
2.28.0

[PATCH 01/14] mips: dts: brcm: allow including header files

[Álvaro Fernández Rojas]

Change /include/ with #include in order to be able to include header files
from dt-bindings.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts    | 2 +-
 arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts | 2 +-
 arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg.dts                | 2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts          | 2 +-
 arch/mips/boot/dts/brcm/bcm96368mvwg.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97125cbmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97346dbsmb.dts              | 4 ++--
 arch/mips/boot/dts/brcm/bcm97358svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97360svmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97362svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97420c.dts                  | 2 +-
 arch/mips/boot/dts/brcm/bcm97425svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97435svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm9ejtagprb.dts               | 2 +-
 16 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
index ed6023a91763..d702a843c74a 100644
--- a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3368.dtsi"
+#include "bcm3368.dtsi"
 
 / {
 	compatible = "netgear,cvg834g", "brcm,bcm3368";
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
index 8d010b919de2..b511bc7125d5 100644
--- a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm63268.dtsi"
+#include "bcm63268.dtsi"
 
 / {
 	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
diff --git a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
index 53e57cc29291..c646690ee3df 100644
--- a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6358.dtsi"
+#include "bcm6358.dtsi"
 
 / {
 	compatible = "sfr,nb4-ser", "brcm,bcm6358";
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
index 3e83bee5b91e..f83d95ca0514 100644
--- a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6362.dtsi"
+#include "bcm6362.dtsi"
 
 / {
 	compatible = "sfr,nb6-ser", "brcm,bcm6362";
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
index 601e4d9293ab..7d3f181b8980 100644
--- a/arch/mips/boot/dts/brcm/bcm93384wvg.dts
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3384_zephyr.dtsi"
+#include "bcm3384_zephyr.dtsi"
 
 / {
 	compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
index 938a8e66128c..f845faa0d682 100644
--- a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3384_viper.dtsi"
+#include "bcm3384_viper.dtsi"
 
 / {
 	compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper";
diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
index 6d772c394e41..f5e955085308 100644
--- a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
+++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6368.dtsi"
+#include "bcm6368.dtsi"
 
 / {
 	compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index 79e9769f7e00..bda5f796251a 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7125.dtsi"
+#include "bcm7125.dtsi"
 
 / {
 	compatible = "brcm,bcm97125cbmb", "brcm,bcm7125";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 28370ff77eeb..9f73735e815c 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7346.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7346.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 41c1b510c230..522f2c40d6e6 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7358.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+#include "bcm7358.dtsi"
+#include "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 9f6c6c9b7ea7..01f215b08dba 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7360.dtsi"
+#include "bcm7360.dtsi"
 
 / {
 	compatible = "brcm,bcm97360svmb", "brcm,bcm7360";
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index df8b755c390f..97aeb51b6831 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7362.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+#include "bcm7362.dtsi"
+#include "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 086faeaa384a..cc70c2dd4d85 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7420.dtsi"
+#include "bcm7420.dtsi"
 
 / {
 	compatible = "brcm,bcm97420c", "brcm,bcm7420";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 0ed22217bf3a..9efecfe1e05c 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7425.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7425.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 2c145a883aef..b653c6ff74b5 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7435.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7435.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
index 8d58c1971b30..615d2b97770e 100644
--- a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
+++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6328.dtsi"
+#include "bcm6328.dtsi"
 
 / {
 	compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328";
-- 
2.28.0

[PATCH 02/14] mips: bmips: add BCM3368 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM3368 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm3368-interrupt-controller.h            | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h
new file mode 100644
index 000000000000..e269c1bb93ea
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM3368_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM3368_H
+
+#define BCM3368_IRQ_TIMER		0
+#define BCM3368_IRQ_SPI			1
+#define BCM3368_IRQ_UART0		2
+#define BCM3368_IRQ_UART1		3
+#define BCM3368_IRQ_ENET1		6
+#define BCM3368_IRQ_ENET0		8
+#define BCM3368_IRQ_ENET_PHY		9
+#define BCM3368_IRQ_ENET0_RX_DMA	15
+#define BCM3368_IRQ_ENET0_TX_DMA	16
+#define BCM3368_IRQ_ENET1_RX_DMA	17
+#define BCM3368_IRQ_ENET1_TX_DMA	18
+#define BCM3368_IRQ_PCI			31
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM3368_H */
-- 
2.28.0

[PATCH 03/14] mips: bmips: add BCM6318 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM6318 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm6318-interrupt-controller.h            | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h
new file mode 100644
index 000000000000..7882dcb279c4
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm6318-interrupt-controller.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6318_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6318_H
+
+#define BCM6318_IRQ_TIMER0		0
+#define BCM6318_IRQ_TIMER1		1
+#define BCM6318_IRQ_TIMER2		2
+#define BCM6318_IRQ_TIMER3		3
+#define BCM6318_IRQ_USBS		4
+#define BCM6318_IRQ_USB_CTL_RX_DMA	5
+#define BCM6318_IRQ_USB_CTL_TX_DMA	6
+#define BCM6318_IRQ_USB_BULK_RX_DMA	7
+#define BCM6318_IRQ_USB_BULK_TX_DMA	8
+#define BCM6318_IRQ_USB_ISO_RX_DMA	9
+#define BCM6318_IRQ_USB_ISO_TX_DMA	10
+#define BCM6318_IRQ_DG			11
+#define BCM6318_IRQ_EPHY		12
+#define BCM6318_IRQ_EPHY_EN0N		13
+#define BCM6318_IRQ_EPHY_EN1N		14
+#define BCM6318_IRQ_EPHY_EN2N		15
+#define BCM6318_IRQ_EPHY_EN3N		16
+#define BCM6318_IRQ_EPHY_EN0		17
+#define BCM6318_IRQ_EPHY_EN1		18
+#define BCM6318_IRQ_EPHY_EN2		19
+#define BCM6318_IRQ_EPHY_EN3		20
+#define BCM6318_IRQ_XDSL		21
+#define BCM6318_IRQ_SDR			22
+#define BCM6318_IRQ_PCIE_RC		23
+#define BCM6318_IRQ_EXT0		24
+#define BCM6318_IRQ_EXT1		25
+#define BCM6318_IRQ_EXT2		26
+#define BCM6318_IRQ_EXT3		27
+#define BCM6318_IRQ_UART0		28
+#define BCM6318_IRQ_HSSPI		29
+#define BCM6318_IRQ_WAKE_ON_IRQ		30
+#define BCM6318_IRQ_TIMER		31
+#define BCM6318_IRQ_ENETSW_RX_DMA0	32
+#define BCM6318_IRQ_ENETSW_RX_DMA1	33
+#define BCM6318_IRQ_ENETSW_RX_DMA2	34
+#define BCM6318_IRQ_ENETSW_RX_DMA3	35
+#define BCM6318_IRQ_WDTIMER		37
+#define BCM6318_IRQ_ENETSW		40
+#define BCM6318_IRQ_OHCI		41
+#define BCM6318_IRQ_EHCI		42
+#define BCM6318_IRQ_ATM_DMA0		43
+#define BCM6318_IRQ_ATM_DMA1		44
+#define BCM6318_IRQ_ATM_DMA2		45
+#define BCM6318_IRQ_ATM_DMA3		46
+#define BCM6318_IRQ_ATM_DMA4		47
+#define BCM6318_IRQ_ATM_DMA5		48
+#define BCM6318_IRQ_ATM_DMA6		49
+#define BCM6318_IRQ_ATM_DMA7		50
+#define BCM6318_IRQ_ATM_DMA8		51
+#define BCM6318_IRQ_ATM_DMA9		52
+#define BCM6318_IRQ_ATM_DMA10		53
+#define BCM6318_IRQ_ATM_DMA11		54
+#define BCM6318_IRQ_ATM_DMA12		55
+#define BCM6318_IRQ_ATM_DMA13		56
+#define BCM6318_IRQ_ATM_DMA14		57
+#define BCM6318_IRQ_ATM_DMA15		58
+#define BCM6318_IRQ_ATM_DMA16		59
+#define BCM6318_IRQ_ATM_DMA17		60
+#define BCM6318_IRQ_ATM_DMA18		61
+#define BCM6318_IRQ_ATM_DMA19		62
+#define BCM6318_IRQ_SAR			63
+#define BCM6318_IRQ_ADSL_ENERGY		64
+#define BCM6318_IRQ_ADSL_ENERGY_N	65
+#define BCM6318_IRQ_USB_ENERGY_ON	66
+#define BCM6318_IRQ_USB_ENERGY_OFF	67
+#define BCM6318_IRQ_PVTMON_TEMP		68
+#define BCM6318_IRQ_SYSPLL_LOCK		69
+#define BCM6318_IRQ_LCPLL_LOCK		70
+#define BCM6318_IRQ_PMU_STABLE		71
+#define BCM6318_IRQ_ENETSW_TX_DMA0	72
+#define BCM6318_IRQ_ENETSW_TX_DMA1	73
+#define BCM6318_IRQ_ENETSW_TX_DMA2	74
+#define BCM6318_IRQ_ENETSW_TX_DMA3	75
+#define BCM6318_IRQ_EPHY0_IDDQ_ENERGY	76
+#define BCM6318_IRQ_EPHY1_IDDQ_ENERGY	77
+#define BCM6318_IRQ_EPHY2_IDDQ_ENERGY	78
+#define BCM6318_IRQ_EPHY3_IDDQ_ENERGY	79
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6318_H */
-- 
2.28.0

[PATCH 04/14] mips: bmips: add BCM6328 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM6328 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm6328-interrupt-controller.h            | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h
new file mode 100644
index 000000000000..def2a21efc77
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6328_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6328_H
+
+#define BCM6328_IRQ_NAND		0
+#define BCM6328_IRQ_PCM			1
+#define BCM6328_IRQ_PCM_DMA0		2
+#define BCM6328_IRQ_PCM_DMA1		3
+#define BCM6328_IRQ_USBS		4
+#define BCM6328_IRQ_USB_CTL_RX_DMA	5
+#define BCM6328_IRQ_USB_CTL_TX_DMA	6
+#define BCM6328_IRQ_USB_BULK_RX_DMA	7
+#define BCM6328_IRQ_USB_BULK_TX_DMA	8
+#define BCM6328_IRQ_USB_ISO_RX_DMA	9
+#define BCM6328_IRQ_USB_ISO_TX_DMA	10
+#define BCM6328_IRQ_DG			11
+#define BCM6328_IRQ_EPHY		12
+#define BCM6328_IRQ_EPHY_EN0N		13
+#define BCM6328_IRQ_EPHY_EN1N		14
+#define BCM6328_IRQ_EPHY_EN2N		15
+#define BCM6328_IRQ_EPHY_EN3N		16
+#define BCM6328_IRQ_EPHY_EN0		17
+#define BCM6328_IRQ_EPHY_EN1		18
+#define BCM6328_IRQ_EPHY_EN2		19
+#define BCM6328_IRQ_EPHY_EN3		20
+#define BCM6328_IRQ_XDSL		21
+#define BCM6328_IRQ_PCIE_EP		22
+#define BCM6328_IRQ_PCIE_RC		23
+#define BCM6328_IRQ_EXTO		24
+#define BCM6328_IRQ_EXT1		25
+#define BCM6328_IRQ_EXT2		26
+#define BCM6328_IRQ_EXT3		27
+#define BCM6328_IRQ_UART0		28
+#define BCM6328_IRQ_HSSPI		29
+#define BCM6328_IRQ_WAKE_ON_IRQ		30
+#define BCM6328_IRQ_TIMER		31
+#define BCM6328_IRQ_ENETSW_RX_DMA0	32
+#define BCM6328_IRQ_ENETSW_RX_DMA1	33
+#define BCM6328_IRQ_ENETSW_TX_DMA0	34
+#define BCM6328_IRQ_ENETSW_TX_DMA1	35
+#define BCM6328_IRQ_UART1		39
+#define BCM6328_IRQ_ENETSW		40
+#define BCM6328_IRQ_OHCI		41
+#define BCM6328_IRQ_EHCI		42
+#define BCM6328_IRQ_ATM_DMA0		43
+#define BCM6328_IRQ_ATM_DMA1		44
+#define BCM6328_IRQ_ATM_DMA2		45
+#define BCM6328_IRQ_ATM_DMA3		46
+#define BCM6328_IRQ_ATM_DMA4		47
+#define BCM6328_IRQ_ATM_DMA5		48
+#define BCM6328_IRQ_ATM_DMA6		49
+#define BCM6328_IRQ_ATM_DMA7		50
+#define BCM6328_IRQ_ATM_DMA8		51
+#define BCM6328_IRQ_ATM_DMA9		52
+#define BCM6328_IRQ_ATM_DMA10		53
+#define BCM6328_IRQ_ATM_DMA11		54
+#define BCM6328_IRQ_ATM_DMA12		55
+#define BCM6328_IRQ_ATM_DMA13		56
+#define BCM6328_IRQ_ATM_DMA14		57
+#define BCM6328_IRQ_ATM_DMA15		58
+#define BCM6328_IRQ_ATM_DMA16		59
+#define BCM6328_IRQ_ATM_DMA17		60
+#define BCM6328_IRQ_ATM_DMA18		61
+#define BCM6328_IRQ_ATM_DMA19		62
+#define BCM6328_IRQ_SAR			63
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6328_H */
-- 
2.28.0

[PATCH 05/14] mips: bmips: add BCM6358 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM6358 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm6358-interrupt-controller.h            | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h
new file mode 100644
index 000000000000..a098639dbe4e
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6358_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6358_H
+
+#define BCM6358_IRQ_TIMER		0
+#define BCM6358_IRQ_SPI			1
+#define BCM6358_IRQ_UART0		2
+#define BCM6358_IRQ_UART1		3
+#define BCM6358_IRQ_OHCI		5
+#define BCM6358_IRQ_EMAC1		6
+#define BCM6358_IRQ_USBS		7
+#define BCM6358_IRQ_EMAC0		8
+#define BCM6358_IRQ_EPHY		9
+#define BCM6358_IRQ_EHCI		10
+#define BCM6358_IRQ_USB_CTL_RX_DMA	11
+#define BCM6358_IRQ_USB_CTL_TX_DMA	12
+#define BCM6358_IRQ_USB_BULK_RX_DMA	13
+#define BCM6358_IRQ_USB_BULK_TX_DMA	14
+#define BCM6358_IRQ_EMAC0_RX_DMA	15
+#define BCM6358_IRQ_EMAC0_TX_DMA	16
+#define BCM6358_IRQ_EMAC1_RX_DMA	17
+#define BCM6358_IRQ_EMAC1_TX_DMA	18
+#define BCM6358_IRQ_ATM		        19
+#define BCM6358_IRQ_EXT4		20
+#define BCM6358_IRQ_EXT5		21
+#define BCM6358_IRQ_PCM			22
+#define BCM6358_IRQ_PCM_RX_DMA		23
+#define BCM6358_IRQ_PCM_TX_DMA		24
+#define BCM6358_IRQ_EXT0		25
+#define BCM6358_IRQ_EXT1		26
+#define BCM6358_IRQ_EXT2		27
+#define BCM6358_IRQ_EXT3		28
+#define BCM6358_IRQ_ADSL		29
+#define BCM6358_IRQ_DG			30
+#define BCM6358_IRQ_MPI			31
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6358_H */
-- 
2.28.0

[PATCH 06/14] mips: bmips: add BCM6362 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM6362 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm6362-interrupt-controller.h            | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h
new file mode 100644
index 000000000000..7a13046f0d81
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6362_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6362_H
+
+#define BCM6362_IRQ_TIMER		0
+#define BCM6362_IRQ_RING_OSC		1
+#define BCM6362_IRQ_LSSPI		2
+#define BCM6362_IRQ_UART0		3
+#define BCM6362_IRQ_UART1		4
+#define BCM6362_IRQ_HSSPI		5
+#define BCM6362_IRQ_WLAN_GPIO		6
+#define BCM6362_IRQ_WLAN		7
+#define BCM6362_IRQ_IPSEC		8
+#define BCM6362_IRQ_OHCI		9
+#define BCM6362_IRQ_EHCI		10
+#define BCM6362_IRQ_USBS		11
+#define BCM6362_IRQ_NAND		12
+#define BCM6362_IRQ_PCM			13
+#define BCM6362_IRQ_EPHY		14
+#define BCM6362_IRQ_DF			15
+#define BCM6362_IRQ_EPHY_EN0		16
+#define BCM6362_IRQ_EPHY_EN1		17
+#define BCM6362_IRQ_EPHY_EN2		18
+#define BCM6362_IRQ_EPHY_EN3		19
+#define BCM6362_IRQ_USB_CTL_RX_DMA	20
+#define BCM6362_IRQ_USB_CTL_TX_DMA	21
+#define BCM6362_IRQ_USB_BULK_RX_DMA	22
+#define BCM6362_IRQ_USB_BULK_TX_DMA	23
+#define BCM6362_IRQ_USB_ISO_RX_DMA	24
+#define BCM6362_IRQ_USB_ISO_TX_DMA	25
+#define BCM6362_IRQ_IPSEC_DMA0		26
+#define BCM6362_IRQ_IPSEC_DMA1		27
+#define BCM6362_IRQ_XDSL		28
+#define BCM6362_IRQ_FAP			29
+#define BCM6362_IRQ_PCIE_RC		30
+#define BCM6362_IRQ_PCIE_EP		31
+#define BCM6362_IRQ_ENETSW_RX_DMA0	32
+#define BCM6362_IRQ_ENETSW_RX_DMA1	33
+#define BCM6362_IRQ_ENETSW_RX_DMA2	34
+#define BCM6362_IRQ_ENETSW_RX_DMA3	35
+#define BCM6362_IRQ_PCM_DMA0		36
+#define BCM6362_IRQ_PCM_DMA1		37
+#define BCM6362_IRQ_DECT0		38
+#define BCM6362_IRQ_DECT1		39
+#define BCM6362_IRQ_EXT0		40
+#define BCM6362_IRQ_EXT1		41
+#define BCM6362_IRQ_EXT2		42
+#define BCM6362_IRQ_EXT3		43
+#define BCM6362_IRQ_ATM_DMA0		44
+#define BCM6362_IRQ_ATM_DMA1		45
+#define BCM6362_IRQ_ATM_DMA2		46
+#define BCM6362_IRQ_ATM_DMA3		47
+#define BCM6362_IRQ_ATM_DMA4		48
+#define BCM6362_IRQ_ATM_DMA5		49
+#define BCM6362_IRQ_ATM_DMA6		50
+#define BCM6362_IRQ_ATM_DMA7		51
+#define BCM6362_IRQ_ATM_DMA8		52
+#define BCM6362_IRQ_ATM_DMA9		53
+#define BCM6362_IRQ_ATM_DMA10		54
+#define BCM6362_IRQ_ATM_DMA11		55
+#define BCM6362_IRQ_ATM_DMA12		56
+#define BCM6362_IRQ_ATM_DMA13		57
+#define BCM6362_IRQ_ATM_DMA14		58
+#define BCM6362_IRQ_ATM_DMA15		59
+#define BCM6362_IRQ_ATM_DMA16		60
+#define BCM6362_IRQ_ATM_DMA17		61
+#define BCM6362_IRQ_ATM_DMA18		62		
+#define BCM6362_IRQ_ATM_DMA19		63
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6362_H */
-- 
2.28.0

[PATCH 07/14] mips: bmips: add BCM6368 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM6368 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm6368-interrupt-controller.h            | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h
new file mode 100644
index 000000000000..988e368cc156
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6368_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6368_H
+
+#define BCM6368_IRQ_TIMER		0
+#define BCM6368_IRQ_SPI			1
+#define BCM6368_IRQ_UART0		2
+#define BCM6368_IRQ_UART1		3
+#define BCM6368_IRQ_XDSL		4
+#define BCM6368_IRQ_OHCI		5
+#define BCM6368_IRQ_IPSEC		6
+#define BCM6368_IRQ_EHCI		7
+#define BCM6368_IRQ_USBS		8
+#define BCM6368_IRQ_RING_OSC		9
+#define BCM6368_IRQ_NAND		10
+#define BCM6368_IRQ_ATM			11
+#define BCM6368_IRQ_PCM			12
+#define BCM6368_IRQ_MPI			13
+#define BCM6368_IRQ_DG			14
+#define BCM6368_IRQ_EPHY		15
+#define BCM6368_IRQ_EPHY_EN0		16
+#define BCM6368_IRQ_EPHY_EN1		17
+#define BCM6368_IRQ_EPHY_EN2		18
+#define BCM6368_IRQ_EPHY_EN3		19
+#define BCM6368_IRQ_EXT0		20
+#define BCM6368_IRQ_EXT1		21
+#define BCM6368_IRQ_EXT2		22
+#define BCM6368_IRQ_EXT3		23
+#define BCM6368_IRQ_EXT4		24
+#define BCM6368_IRQ_EXT5		25
+#define BCM6368_IRQ_USB_CTL_RX_DMA	26
+#define BCM6368_IRQ_USB_CTL_TX_DMA	27
+#define BCM6368_IRQ_USB_BULK_RX_DMA	28
+#define BCM6368_IRQ_USB_BULK_TX_DMA	29
+#define BCM6368_IRQ_USB_ISO_RX_DMA	30
+#define BCM6368_IRQ_USB_ISO_TX_DMA	31
+#define BCM6368_IRQ_ENETSW_RX_DMA0	32	
+#define BCM6368_IRQ_ENETSW_RX_DMA1	33	
+#define BCM6368_IRQ_ENETSW_RX_DMA2	34	
+#define BCM6368_IRQ_ENETSW_RX_DMA3	35	
+#define BCM6368_IRQ_ENETSW_TX_DMA0	36	
+#define BCM6368_IRQ_ENETSW_TX_DMA1	37	
+#define BCM6368_IRQ_ENETSW_TX_DMA2	38	
+#define BCM6368_IRQ_ENETSW_TX_DMA3	39	
+#define BCM6368_IRQ_ATM_DMA0		40
+#define BCM6368_IRQ_ATM_DMA1		41
+#define BCM6368_IRQ_ATM_DMA2		42
+#define BCM6368_IRQ_ATM_DMA3		43
+#define BCM6368_IRQ_ATM_DMA4		44
+#define BCM6368_IRQ_ATM_DMA5		45
+#define BCM6368_IRQ_ATM_DMA6		46
+#define BCM6368_IRQ_ATM_DMA7		47
+#define BCM6368_IRQ_ATM_DMA8		48
+#define BCM6368_IRQ_ATM_DMA9		49
+#define BCM6368_IRQ_ATM_DMA10		50
+#define BCM6368_IRQ_ATM_DMA11		51
+#define BCM6368_IRQ_ATM_DMA12		52
+#define BCM6368_IRQ_ATM_DMA13		53
+#define BCM6368_IRQ_ATM_DMA14		54
+#define BCM6368_IRQ_ATM_DMA15		55
+#define BCM6368_IRQ_ATM_DMA16		56
+#define BCM6368_IRQ_ATM_DMA17		57
+#define BCM6368_IRQ_ATM_DMA18		58
+#define BCM6368_IRQ_ATM_DMA19		59
+#define BCM6368_IRQ_IPSEC_DMA0		60
+#define BCM6368_IRQ_IPSEC_DMA1		61
+#define BCM6368_IRQ_PCM_DMA0		62
+#define BCM6368_IRQ_PCM_DMA1		63
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM6368_H */
-- 
2.28.0

[PATCH 08/14] mips: bmips: add BCM63268 irq definitions

[Álvaro Fernández Rojas]

Add header with BCM63268 definitions in order to be able to include it from
device tree files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 .../bcm63268-interrupt-controller.h           | 86 +++++++++++++++++++
 1 file changed, 86 insertions(+)
 create mode 100644 include/dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h

diff --git a/include/dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h b/include/dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h
new file mode 100644
index 000000000000..8589e8686d60
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM63268_H
+#define __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM63268_H
+
+#define BCM63268_IRQ_TIMER		0
+#define BCM63268_IRQ_ENETSW_RX_DMA0	1
+#define BCM63268_IRQ_ENETSW_RX_DMA1	2
+#define BCM63268_IRQ_ENETSW_RX_DMA2	3
+#define BCM63268_IRQ_ENETSW_RX_DMA3	4
+#define BCM63268_IRQ_UART0		5
+#define BCM63268_IRQ_HSSPI		6
+#define BCM63268_IRQ_WLAN		7
+#define BCM63268_IRQ_IPSEC		8
+#define BCM63268_IRQ_OHCI		9
+#define BCM63268_IRQ_EHCI		10
+#define BCM63268_IRQ_USBS		11
+#define BCM63268_IRQ_PCM		12
+#define BCM63268_IRQ_EPHY		13
+#define BCM63268_IRQ_DG			14
+#define BCM63268_IRQ_EPHY0_EN		15
+#define BCM63268_IRQ_EPHY1_EN		16
+#define BCM63268_IRQ_EPHY2_EN		17
+#define BCM63268_IRQ_GPHY_EN		18
+#define BCM63268_IRQ_USB_CTL_RX_DMA	19
+#define BCM63268_IRQ_USB_BULK_RX_DMA	20
+#define BCM63268_IRQ_ISO_RX_DMA		21
+#define BCM63268_IRQ_IPSEC_DMA0		22
+#define BCM63268_IRQ_XDSL		23
+#define BCM63268_IRQ_FAP0		24
+#define BCM63268_IRQ_FAP1		25
+#define BCM63268_IRQ_ATM_DMA0		26
+#define BCM63268_IRQ_ATM_DMA1		27
+#define BCM63268_IRQ_ATM_DMA2		28
+#define BCM63268_IRQ_ATM_DMA3		29
+#define BCM63268_IRQ_WAKE_ON_IRQ	30
+#define BCM63268_IRQ_GPHY		31
+#define BCM63268_IRQ_DECT0              32		
+#define BCM63268_IRQ_DECT1		33
+#define BCM63268_IRQ_UART1              34		
+#define BCM63268_IRQ_WLAN_GPIO		35
+#define BCM63268_IRQ_USB_CTL_TX_DMA	36
+#define BCM63268_IRQ_USB_BULK_TX_DMA	37
+#define BCM63268_IRQ_ISO_TX_DMA		38
+#define BCM63268_IRQ_IPSEC_DMA1		39
+#define BCM63268_IRQ_PCIE_RC		40
+#define BCM63268_IRQ_PCIE_EP		41
+#define BCM63268_IRQ_PCM_DMA0		42
+#define BCM63268_IRQ_PCM_DMA1		43
+#define BCM63268_IRQ_EXT0		44
+#define BCM63268_IRQ_EXT1		45
+#define BCM63268_IRQ_EXT2		46
+#define BCM63268_IRQ_EXT3		47
+#define BCM63268_IRQ_ENETSW		48
+#define BCM63268_IRQ_SAR		49
+#define BCM63268_IRQ_NAND		50
+#define BCM63268_IRQ_RING_OSC		52
+#define BCM63268_IRQ_USB_CONNECT	53
+#define BCM63268_IRQ_USB_DISCONNECT	54
+#define BCM63268_IRQ_PER_MBOX0		55
+#define BCM63268_IRQ_PER_MBOX1		56
+#define BCM63268_IRQ_PER_MBOX2		57
+#define BCM63268_IRQ_PER_MBOX3		58
+#define BCM63268_IRQ_ATM_DMA4		59
+#define BCM63268_IRQ_ATM_DMA5		60
+#define BCM63268_IRQ_ATM_DMA6		61
+#define BCM63268_IRQ_ATM_DMA7		62
+#define BCM63268_IRQ_ENETSW_TX_DMA0	64
+#define BCM63268_IRQ_ENETSW_TX_DMA1	65
+#define BCM63268_IRQ_ENETSW_TX_DMA2	66
+#define BCM63268_IRQ_ENETSW_TX_DMA3	67
+#define BCM63268_IRQ_ATM_DMA8		68
+#define BCM63268_IRQ_ATM_DMA9		69
+#define BCM63268_IRQ_ATM_DMA10		70
+#define BCM63268_IRQ_ATM_DMA11		71
+#define BCM63268_IRQ_ATM_DMA12		72
+#define BCM63268_IRQ_ATM_DMA13		73
+#define BCM63268_IRQ_ATM_DMA14		74
+#define BCM63268_IRQ_ATM_DMA15		75
+#define BCM63268_IRQ_ATM_DMA16		76
+#define BCM63268_IRQ_ATM_DMA17		77
+#define BCM63268_IRQ_ATM_DMA18		78
+#define BCM63268_IRQ_ATM_DMA19		79
+#define BCM63268_IRQ_LSSPI		80
+
+#endif /* __DT_BINDINGS_INTERRUPT_CONTROLLER_BCM63268_H */
-- 
2.28.0

[PATCH 09/14] mips: bmips: bcm3368: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm3368.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..63d844601718 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm3368-clock.h"
+#include "dt-bindings/interrupt-controller/bcm3368-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -86,7 +90,7 @@ uart0: serial@fff8c100 {
 			reg = <0xfff8c100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM3368_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -99,7 +103,7 @@ uart1: serial@fff8c120 {
 			reg = <0xfff8c120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM3368_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
-- 
2.28.0

[PATCH 10/14] mips: bmips: bcm6328: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm6328.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index af860d06def6..1f84f6b05f88 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6328-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6328-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -73,7 +77,7 @@ uart0: serial@10000100 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x10000100 0x18>;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <28>;
+			interrupts = <BCM6328_IRQ_UART0>;
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
 			status = "disabled";
@@ -83,7 +87,7 @@ uart1: serial@10000120 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x10000120 0x18>;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <39>;
+			interrupts = <BCM6328_IRQ_UART1>;
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
 			status = "disabled";
@@ -115,7 +119,7 @@ ehci: usb@10002500 {
 			reg = <0x10002500 0x100>;
 			big-endian;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <42>;
+			interrupts = <BCM6328_IRQ_EHCI>;
 			status = "disabled";
 		};
 
@@ -125,7 +129,7 @@ ohci: usb@10002600 {
 			big-endian;
 			no-big-frame-no;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <41>;
+			interrupts = <BCM6328_IRQ_OHCI>;
 			status = "disabled";
 		};
 	};
-- 
2.28.0

[PATCH 11/14] mips: bmips: bcm6358: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm6358.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
index f21176cac038..d149d062be80 100644
--- a/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6358-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -96,7 +100,7 @@ uart0: serial@fffe0100 {
 			reg = <0xfffe0100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM6358_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -109,7 +113,7 @@ uart1: serial@fffe0120 {
 			reg = <0xfffe0120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM6358_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -122,7 +126,7 @@ ehci: usb@fffe1300 {
 			reg = <0xfffe1300 0x100>;
 			big-endian;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <10>;
+			interrupts = <BCM6358_IRQ_EHCI>;
 			status = "disabled";
 		};
 
@@ -132,7 +136,7 @@ ohci: usb@fffe1400 {
 			big-endian;
 			no-big-frame-no;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <5>;
+			interrupts = <BCM6358_IRQ_OHCI>;
 			status = "disabled";
 		};
 	};
-- 
2.28.0

[PATCH 12/14] mips: bmips: bcm6362: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm6362.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index 8ae6981735b8..e6ec366818a9 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6362-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -87,7 +91,7 @@ uart0: serial@10000100 {
 			reg = <0x10000100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM6362_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -100,7 +104,7 @@ uart1: serial@10000120 {
 			reg = <0x10000120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <4>;
+			interrupts = <BCM6362_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -123,7 +127,7 @@ ehci: usb@10002500 {
 			big-endian;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <10>;
+			interrupts = <BCM6362_IRQ_EHCI>;
 
 			status = "disabled";
 		};
@@ -135,7 +139,7 @@ ohci: usb@10002600 {
 			no-big-frame-no;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <9>;
+			interrupts = <BCM6362_IRQ_OHCI>;
 
 			status = "disabled";
 		};
-- 
2.28.0

[PATCH 13/14] mips: bmips: bcm6368: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm6368.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 449c167dd892..62599d4e6abe 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6368-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -94,7 +98,7 @@ uart0: serial@10000100 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x10000100 0x18>;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM6368_IRQ_UART0>;
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
 			status = "disabled";
@@ -104,7 +108,7 @@ uart1: serial@10000120 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x10000120 0x18>;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM6368_IRQ_UART1>;
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
 			status = "disabled";
@@ -115,7 +119,7 @@ ehci: usb@10001500 {
 			reg = <0x10001500 0x100>;
 			big-endian;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <7>;
+			interrupts = <BCM6368_IRQ_EHCI>;
 			status = "disabled";
 		};
 
@@ -125,7 +129,7 @@ ohci: usb@10001600 {
 			big-endian;
 			no-big-frame-no;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <5>;
+			interrupts = <BCM6368_IRQ_OHCI>;
 			status = "disabled";
 		};
 	};
-- 
2.28.0

[PATCH 14/14] mips: bmips: bcm63268: include and use dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 arch/mips/boot/dts/brcm/bcm63268.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index beec24145af7..17d744db8211 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm63268-clock.h"
+#include "dt-bindings/interrupt-controller/bcm63268-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -87,7 +91,7 @@ uart0: serial@10000180 {
 			reg = <0x10000180 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <5>;
+			interrupts = <BCM63268_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -100,7 +104,7 @@ uart1: serial@100001a0 {
 			reg = <0x100001a0 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <34>;
+			interrupts = <BCM63268_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -123,7 +127,7 @@ ehci: usb@10002500 {
 			big-endian;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <10>;
+			interrupts = <BCM63268_IRQ_EHCI>;
 
 			status = "disabled";
 		};
@@ -135,7 +139,7 @@ ohci: usb@10002600 {
 			no-big-frame-no;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <9>;
+			interrupts = <BCM63268_IRQ_OHCI>;
 
 			status = "disabled";
 		};
-- 
2.28.0

Re: [PATCH 01/14] mips: dts: brcm: allow including header files

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Change /include/ with #include in order to be able to include header files
> from dt-bindings.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 02/14] mips: bmips: add BCM3368 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM3368 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 03/14] mips: bmips: add BCM6318 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM6318 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 09/14] mips: bmips: bcm3368: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 10/14] mips: bmips: bcm6328: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 11/14] mips: bmips: bcm6358: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 12/14] mips: bmips: bcm6362: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 13/14] mips: bmips: bcm6368: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 14/14] mips: bmips: bcm63268: include and use dt-bindings

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Now that there are proper device tree bindings we can start using them.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 04/14] mips: bmips: add BCM6328 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM6328 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 05/14] mips: bmips: add BCM6358 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM6358 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 06/14] mips: bmips: add BCM6362 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM6362 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 07/14] mips: bmips: add BCM6368 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM6368 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 08/14] mips: bmips: add BCM63268 irq definitions

[Florian Fainelli]

On 8/11/2020 11:31 PM, Álvaro Fernández Rojas wrote:
> Add header with BCM63268 definitions in order to be able to include it from
> device tree files.
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 00/14] mips: bmips: include dt-bindings headers

[Rob Herring]

On Wed, Aug 12, 2020 at 08:31:15AM +0200, Álvaro Fernández Rojas wrote:
> Allow including dt-bindings header files and use them for bcm63xx.
> 
> Álvaro Fernández Rojas (14):
>   mips: dts: brcm: allow including header files
>   mips: bmips: add BCM3368 irq definitions
>   mips: bmips: add BCM6318 irq definitions
>   mips: bmips: add BCM6328 irq definitions
>   mips: bmips: add BCM6358 irq definitions
>   mips: bmips: add BCM6362 irq definitions
>   mips: bmips: add BCM6368 irq definitions
>   mips: bmips: add BCM63268 irq definitions
>   mips: bmips: bcm3368: include and use dt-bindings
>   mips: bmips: bcm6328: include and use dt-bindings
>   mips: bmips: bcm6358: include and use dt-bindings
>   mips: bmips: bcm6362: include and use dt-bindings
>   mips: bmips: bcm6368: include and use dt-bindings
>   mips: bmips: bcm63268: include and use dt-bindings
> 
>  .../boot/dts/brcm/bcm3368-netgear-cvg834g.dts |  2 +-
>  arch/mips/boot/dts/brcm/bcm3368.dtsi          |  8 +-
>  .../dts/brcm/bcm63268-comtrend-vr-3032u.dts   |  2 +-
>  arch/mips/boot/dts/brcm/bcm63268.dtsi         | 12 ++-
>  arch/mips/boot/dts/brcm/bcm6328.dtsi          | 12 ++-
>  .../dts/brcm/bcm6358-neufbox4-sercomm.dts     |  2 +-
>  arch/mips/boot/dts/brcm/bcm6358.dtsi          | 12 ++-
>  .../dts/brcm/bcm6362-neufbox6-sercomm.dts     |  2 +-
>  arch/mips/boot/dts/brcm/bcm6362.dtsi          | 12 ++-
>  arch/mips/boot/dts/brcm/bcm6368.dtsi          | 12 ++-
>  arch/mips/boot/dts/brcm/bcm93384wvg.dts       |  2 +-
>  arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts |  2 +-
>  arch/mips/boot/dts/brcm/bcm96368mvwg.dts      |  2 +-
>  arch/mips/boot/dts/brcm/bcm97125cbmb.dts      |  2 +-
>  arch/mips/boot/dts/brcm/bcm97346dbsmb.dts     |  4 +-
>  arch/mips/boot/dts/brcm/bcm97358svmb.dts      |  4 +-
>  arch/mips/boot/dts/brcm/bcm97360svmb.dts      |  2 +-
>  arch/mips/boot/dts/brcm/bcm97362svmb.dts      |  4 +-
>  arch/mips/boot/dts/brcm/bcm97420c.dts         |  2 +-
>  arch/mips/boot/dts/brcm/bcm97425svmb.dts      |  4 +-
>  arch/mips/boot/dts/brcm/bcm97435svmb.dts      |  4 +-
>  arch/mips/boot/dts/brcm/bcm9ejtagprb.dts      |  2 +-
>  .../bcm3368-interrupt-controller.h            | 19 ++++
>  .../bcm6318-interrupt-controller.h            | 84 ++++++++++++++++++
>  .../bcm63268-interrupt-controller.h           | 86 +++++++++++++++++++
>  .../bcm6328-interrupt-controller.h            | 68 +++++++++++++++
>  .../bcm6358-interrupt-controller.h            | 38 ++++++++
>  .../bcm6362-interrupt-controller.h            | 71 +++++++++++++++
>  .../bcm6368-interrupt-controller.h            | 71 +++++++++++++++

You'll notice that there are essentially no other headers with 
SoC interrupt numbers. That's because we don't do defines for them. It's 
pointless obfuscation.

Rob

[PATCH 0/7] mips: bmips: include dt-bindings headers

[Álvaro Fernández Rojas]

Allow including dt-bindings header files for bcm63xx.

 v2: remove irqs header and add more bindings.

Álvaro Fernández Rojas (7):
  mips: dts: brcm: allow including header files
  mips: bmips: bcm3368: include dt-bindings
  mips: bmips: bcm6328: include dt-bindings
  mips: bmips: bcm6358: include dt-bindings
  mips: bmips: bcm6362: include dt-bindings
  mips: bmips: bcm6368: include dt-bindings
  mips: bmips: bcm63268: include dt-bindings

 arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts    | 2 +-
 arch/mips/boot/dts/brcm/bcm3368.dtsi                   | 3 +++
 arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts | 2 +-
 arch/mips/boot/dts/brcm/bcm63268.dtsi                  | 5 +++++
 arch/mips/boot/dts/brcm/bcm6328.dtsi                   | 5 +++++
 arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm6358.dtsi                   | 4 ++++
 arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm6362.dtsi                   | 5 +++++
 arch/mips/boot/dts/brcm/bcm6368.dtsi                   | 4 ++++
 arch/mips/boot/dts/brcm/bcm93384wvg.dts                | 2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts          | 2 +-
 arch/mips/boot/dts/brcm/bcm96368mvwg.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97125cbmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97346dbsmb.dts              | 4 ++--
 arch/mips/boot/dts/brcm/bcm97358svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97360svmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97362svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97420c.dts                  | 2 +-
 arch/mips/boot/dts/brcm/bcm97425svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97435svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm9ejtagprb.dts               | 2 +-
 22 files changed, 47 insertions(+), 21 deletions(-)

-- 
2.20.1

[PATCH 1/7] mips: dts: brcm: allow including header files

[Álvaro Fernández Rojas]

Change /include/ with #include in order to be able to include header files
from dt-bindings.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: no changes.

 arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts    | 2 +-
 arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts | 2 +-
 arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts   | 2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg.dts                | 2 +-
 arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts          | 2 +-
 arch/mips/boot/dts/brcm/bcm96368mvwg.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97125cbmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97346dbsmb.dts              | 4 ++--
 arch/mips/boot/dts/brcm/bcm97358svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97360svmb.dts               | 2 +-
 arch/mips/boot/dts/brcm/bcm97362svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97420c.dts                  | 2 +-
 arch/mips/boot/dts/brcm/bcm97425svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm97435svmb.dts               | 4 ++--
 arch/mips/boot/dts/brcm/bcm9ejtagprb.dts               | 2 +-
 16 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
index ed6023a91763..d702a843c74a 100644
--- a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3368.dtsi"
+#include "bcm3368.dtsi"
 
 / {
 	compatible = "netgear,cvg834g", "brcm,bcm3368";
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
index 8d010b919de2..b511bc7125d5 100644
--- a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm63268.dtsi"
+#include "bcm63268.dtsi"
 
 / {
 	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
diff --git a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
index 53e57cc29291..c646690ee3df 100644
--- a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6358.dtsi"
+#include "bcm6358.dtsi"
 
 / {
 	compatible = "sfr,nb4-ser", "brcm,bcm6358";
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
index 3e83bee5b91e..f83d95ca0514 100644
--- a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6362.dtsi"
+#include "bcm6362.dtsi"
 
 / {
 	compatible = "sfr,nb6-ser", "brcm,bcm6362";
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
index 601e4d9293ab..7d3f181b8980 100644
--- a/arch/mips/boot/dts/brcm/bcm93384wvg.dts
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3384_zephyr.dtsi"
+#include "bcm3384_zephyr.dtsi"
 
 / {
 	compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
index 938a8e66128c..f845faa0d682 100644
--- a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm3384_viper.dtsi"
+#include "bcm3384_viper.dtsi"
 
 / {
 	compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper";
diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
index 6d772c394e41..f5e955085308 100644
--- a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
+++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6368.dtsi"
+#include "bcm6368.dtsi"
 
 / {
 	compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index 79e9769f7e00..bda5f796251a 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7125.dtsi"
+#include "bcm7125.dtsi"
 
 / {
 	compatible = "brcm,bcm97125cbmb", "brcm,bcm7125";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 28370ff77eeb..9f73735e815c 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7346.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7346.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 41c1b510c230..522f2c40d6e6 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7358.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+#include "bcm7358.dtsi"
+#include "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 9f6c6c9b7ea7..01f215b08dba 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7360.dtsi"
+#include "bcm7360.dtsi"
 
 / {
 	compatible = "brcm,bcm97360svmb", "brcm,bcm7360";
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index df8b755c390f..97aeb51b6831 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7362.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+#include "bcm7362.dtsi"
+#include "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 086faeaa384a..cc70c2dd4d85 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7420.dtsi"
+#include "bcm7420.dtsi"
 
 / {
 	compatible = "brcm,bcm97420c", "brcm,bcm7420";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 0ed22217bf3a..9efecfe1e05c 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7425.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7425.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 2c145a883aef..b653c6ff74b5 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm7435.dtsi"
-/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+#include "bcm7435.dtsi"
+#include "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
index 8d58c1971b30..615d2b97770e 100644
--- a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
+++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-/include/ "bcm6328.dtsi"
+#include "bcm6328.dtsi"
 
 / {
 	compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328";
-- 
2.20.1

[PATCH 2/7] mips: bmips: bcm3368: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header.

 arch/mips/boot/dts/brcm/bcm3368.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
index 69cbef472377..db7e801dad55 100644
--- a/arch/mips/boot/dts/brcm/bcm3368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm3368-clock.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

[PATCH 3/7] mips: bmips: bcm6328: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header, add more bindings.

 arch/mips/boot/dts/brcm/bcm6328.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index 9dc558763c46..fe93f2692281 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -1,4 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6328-clock.h"
+#include "dt-bindings/reset/bcm6328-reset.h"
+#include "dt-bindings/soc/bcm6328-pm.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

[PATCH 4/7] mips: bmips: bcm6358: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header, add more bindings.

 arch/mips/boot/dts/brcm/bcm6358.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
index 9d93e7f5e6fc..f8753becc164 100644
--- a/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6358-clock.h"
+#include "dt-bindings/reset/bcm6358-reset.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

[PATCH 5/7] mips: bmips: bcm6362: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header, add more bindings.

 arch/mips/boot/dts/brcm/bcm6362.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index eb10341b75ba..a2dbbf062cd8 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -1,4 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6362-clock.h"
+#include "dt-bindings/reset/bcm6362-reset.h"
+#include "dt-bindings/soc/bcm6362-pm.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

[PATCH 6/7] mips: bmips: bcm6368: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header, add more bindings.

 arch/mips/boot/dts/brcm/bcm6368.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 52c19f40b9cc..c4eb4b67ecbd 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6368-clock.h"
+#include "dt-bindings/reset/bcm6368-reset.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

[PATCH 7/7] mips: bmips: bcm63268: include dt-bindings

[Álvaro Fernández Rojas]

Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 v2: remove irqs header, add more bindings.

 arch/mips/boot/dts/brcm/bcm63268.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
index e0021ff9f144..575c9d3eb4c8 100644
--- a/arch/mips/boot/dts/brcm/bcm63268.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -1,4 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm63268-clock.h"
+#include "dt-bindings/reset/bcm63268-reset.h"
+#include "dt-bindings/soc/bcm63268-pm.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-- 
2.20.1

Re: [PATCH 0/7] mips: bmips: include dt-bindings headers

[Thomas Bogendoerfer]

On Wed, Feb 24, 2021 at 10:38:49AM +0100, Álvaro Fernández Rojas wrote:
> Allow including dt-bindings header files for bcm63xx.
> 
>  v2: remove irqs header and add more bindings.
> 
> Álvaro Fernández Rojas (7):
>   mips: dts: brcm: allow including header files
>   mips: bmips: bcm3368: include dt-bindings
>   mips: bmips: bcm6328: include dt-bindings
>   mips: bmips: bcm6358: include dt-bindings
>   mips: bmips: bcm6362: include dt-bindings
>   mips: bmips: bcm6368: include dt-bindings
>   mips: bmips: bcm63268: include dt-bindings
> 
>  arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts    | 2 +-
>  arch/mips/boot/dts/brcm/bcm3368.dtsi                   | 3 +++
>  arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts | 2 +-
>  arch/mips/boot/dts/brcm/bcm63268.dtsi                  | 5 +++++
>  arch/mips/boot/dts/brcm/bcm6328.dtsi                   | 5 +++++
>  arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts   | 2 +-
>  arch/mips/boot/dts/brcm/bcm6358.dtsi                   | 4 ++++
>  arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts   | 2 +-
>  arch/mips/boot/dts/brcm/bcm6362.dtsi                   | 5 +++++
>  arch/mips/boot/dts/brcm/bcm6368.dtsi                   | 4 ++++
>  arch/mips/boot/dts/brcm/bcm93384wvg.dts                | 2 +-
>  arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts          | 2 +-
>  arch/mips/boot/dts/brcm/bcm96368mvwg.dts               | 2 +-
>  arch/mips/boot/dts/brcm/bcm97125cbmb.dts               | 2 +-
>  arch/mips/boot/dts/brcm/bcm97346dbsmb.dts              | 4 ++--
>  arch/mips/boot/dts/brcm/bcm97358svmb.dts               | 4 ++--
>  arch/mips/boot/dts/brcm/bcm97360svmb.dts               | 2 +-
>  arch/mips/boot/dts/brcm/bcm97362svmb.dts               | 4 ++--
>  arch/mips/boot/dts/brcm/bcm97420c.dts                  | 2 +-
>  arch/mips/boot/dts/brcm/bcm97425svmb.dts               | 4 ++--
>  arch/mips/boot/dts/brcm/bcm97435svmb.dts               | 4 ++--
>  arch/mips/boot/dts/brcm/bcm9ejtagprb.dts               | 2 +-
>  22 files changed, 47 insertions(+), 21 deletions(-)

series applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]