[PATCH 1/3] arm64: dts: qcom: sm8150: fix up primary USB nodes

[PATCH 1/3] arm64: dts: qcom: sm8150: fix up primary USB nodes

[Jonathan Marek]

The compatible for hsphy has out of place indentation, and the assigned
clock rate for GCC_USB30_PRIM_MASTER_CLK is incorrect, the clock doesn't
support a rate of 150000000. Use a rate of 200000000 to match downstream.

Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead3006..ab8680c6672e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -767,7 +767,7 @@ glink-edge {
 
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sm8150-usb-hs-phy",
-							"qcom,usb-snps-hs-7nm-phy";
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0 0x088e2000 0 0x400>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -833,7 +833,7 @@ usb_1: usb@a6f8800 {
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
+			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.26.1

[PATCH 2/3] arm64: dts: qcom: use sm8150 gpucc dt-bindings

[Jonathan Marek]

Constants were used to allow merging separately from the dt-bindings,
switch to symbolic names now that dt-bindings have landed.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ab8680c6672e..62d49e81483e 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -621,15 +622,15 @@ gmu: gmu@2c6a000 {
 				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hfi", "gmu";
 
-			clocks = <&gpucc 0>,
-				 <&gpucc 3>,
-				 <&gpucc 6>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
 				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
 			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
 
-			power-domains = <&gpucc 0>,
-					<&gpucc 1>;
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
 			power-domain-names = "cx", "gx";
 
 			iommus = <&adreno_smmu 5 0x400>;
@@ -674,12 +675,12 @@ adreno_smmu: iommu@2ca0000 {
 				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
 				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gpucc 0>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
 			clock-names = "ahb", "bus", "iface";
 
-			power-domains = <&gpucc 0>;
+			power-domains = <&gpucc GPU_CX_GDSC>;
 		};
 
 		tlmm: pinctrl@3100000 {
-- 
2.26.1

[PATCH 3/3] arm64: dts: qcom: use sm8250 gpucc dt-bindings

[Jonathan Marek]

Constants were used to allow merging separately from the dt-bindings,
switch to symbolic names now that dt-bindings have landed.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 377172e8967b..b82d8f40fa42 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -1127,15 +1128,15 @@ gmu: gmu@3d6a000 {
 				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hfi", "gmu";
 
-			clocks = <&gpucc 0>,
-				 <&gpucc 3>,
-				 <&gpucc 6>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
 				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
 			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
 
-			power-domains = <&gpucc 0>,
-					<&gpucc 1>;
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
 			power-domain-names = "cx", "gx";
 
 			iommus = <&adreno_smmu 5 0x400>;
@@ -1181,12 +1182,12 @@ adreno_smmu: iommu@3da0000 {
 				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gpucc 0>,
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
 			clock-names = "ahb", "bus", "iface";
 
-			power-domains = <&gpucc 0>;
+			power-domains = <&gpucc GPU_CX_GDSC>;
 		};
 
 		slpi: remoteproc@5c00000 {
-- 
2.26.1