[PATCH 5.4 000/107] 5.4.61-rc1 review

[PATCH 5.4 000/107] 5.4.61-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.61 release.
There are 107 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 Aug 2020 08:23:34 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.61-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.61-rc1

Juergen Gross <jgross@suse.com>
    xen: don't reschedule in preemption off sections

Peter Xu <peterx@redhat.com>
    mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

Al Viro <viro@zeniv.linux.org.uk>
    do_epoll_ctl(): clean the failure exits up a bit

Marc Zyngier <maz@kernel.org>
    epoll: Keep a reference on files added to the check list

Li Heng <liheng40@huawei.com>
    efi: add missed destroy_workqueue when efisubsys_init fails

Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
    powerpc/pseries: Do not initiate shutdown when system is running on UPS

Tom Rix <trix@redhat.com>
    net: dsa: b53: check for timeout

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

Wang Hai <wanghai38@huawei.com>
    net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()

Shay Agroskin <shayagr@amazon.com>
    net: ena: Prevent reset after device destruction

Jiri Wiesner <jwiesner@suse.com>
    bonding: fix active-backup failover for current ARP slave

Stephen Boyd <swboyd@chromium.org>
    ARM64: vdso32: Install vdso32 from vdso_install

David Howells <dhowells@redhat.com>
    afs: Fix NULL deref in afs_dynroot_depopulate()

Selvin Xavier <selvin.xavier@broadcom.com>
    RDMA/bnxt_re: Do not add user qps to flushlist

Randy Dunlap <rdunlap@infradead.org>
    Fix build error when CONFIG_ACPI is not set/enabled:

Juergen Gross <jgross@suse.com>
    efi: avoid error message when booting under Xen

Masahiro Yamada <masahiroy@kernel.org>
    kconfig: qconf: fix signal connection to invalid slots

Masahiro Yamada <masahiroy@kernel.org>
    kconfig: qconf: do not limit the pop-up menu to the first row

Quinn Tran <qutran@marvell.com>
    Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"

Jim Mattson <jmattson@google.com>
    kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode

Jim Mattson <jmattson@google.com>
    kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode

Alex Williamson <alex.williamson@redhat.com>
    vfio/type1: Add proper error unwind for vfio_iommu_replay()

Dinghao Liu <dinghao.liu@zju.edu.cn>
    ASoC: intel: Fix memleak in sst_media_open

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ASoC: msm8916-wcd-analog: fix register Interrupt offset

Heiko Carstens <hca@linux.ibm.com>
    s390/ptrace: fix storage key handling

Heiko Carstens <hca@linux.ibm.com>
    s390/runtime_instrumentation: fix storage key handling

Cong Wang <xiyou.wangcong@gmail.com>
    bonding: fix a potential double-unregister

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: add rxtimer for multipacket broadcast session

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: abort multipacket broadcast session when timeout occurs

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: cancel rxtimer on multipacket broadcast session complete

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: fix support for multipacket broadcast message

Jarod Wilson <jarod@redhat.com>
    bonding: show saner speed for broadcast mode

Fugang Duan <fugang.duan@nxp.com>
    net: fec: correct the error path for regulator disable in probe

Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
    i40e: Fix crash during removing i40e driver

Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
    i40e: Set RX_ONLY mode for unicast promiscuous on VLAN

Oleksij Rempel <linux@rempel-privat.de>
    can: j1939: transport: add j1939_session_skb_find_by_offset() function

Oleksij Rempel <linux@rempel-privat.de>
    can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack

Eric Dumazet <edumazet@google.com>
    can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()

John Fastabend <john.fastabend@gmail.com>
    bpf: sock_ops sk access may stomp registers when dst_reg = src_reg

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ASoC: q6routing: add dummy register read/write function

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM

Amelie Delaunay <amelie.delaunay@st.com>
    spi: stm32: fixes suspend/resume management

Stephen Suryaputra <ssuryaextr@gmail.com>
    netfilter: nf_tables: nft_exthdr: the presence return value should be little-endian

Jan Kara <jack@suse.cz>
    ext4: don't allow overlapping system zones

Eric Sandeen <sandeen@redhat.com>
    ext4: fix potential negative array index in do_split()

Helge Deller <deller@gmx.de>
    fs/signalfd.c: fix inconsistent return codes for signalfd4

Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
    alpha: fix annotation of io{read,write}{16,32}be()

Eiichi Tsukata <devel@etsukata.com>
    xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init

Gaurav Singh <gaurav1086@gmail.com>
    tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null pointer dereference

Evgeny Novikov <novikov@ispras.ru>
    media: camss: fix memory leaks on error handling paths in probe

Mao Wenan <wenan.mao@linux.alibaba.com>
    virtio_ring: Avoid loop when vq is broken in virtqueue_poll

Javed Hasan <jhasan@marvell.com>
    scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
    cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0

Boris Ostrovsky <boris.ostrovsky@oracle.com>
    swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses

Xiubo Li <xiubli@redhat.com>
    ceph: fix use-after-free for fsc->mdsc

Zhe Li <lizhe67@huawei.com>
    jffs2: fix UAF problem

Felix Kuehling <Felix.Kuehling@amd.com>
    drm/ttm: fix offset in VMAs with a pg_offs in ttm_bo_vm_access

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: fix inode quota reservation checks

Chuck Lever <chuck.lever@oracle.com>
    svcrdma: Fix another Receive buffer leak

Greg Ungerer <gerg@linux-m68k.org>
    m68knommu: fix overwriting of bits in ColdFire V3 cache control

Jinyang He <hejinyang@loongson.cn>
    MIPS: Fix unable to reserve memory for Crash kernel

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    Input: psmouse - add a newline when printing 'proto' by sysfs

Evgeny Novikov <novikov@ispras.ru>
    media: vpss: clean up resources in init

Huacai Chen <chenhc@lemote.com>
    rtc: goldfish: Enable interrupt in set_alarm() when necessary

Chuhong Yuan <hslester96@gmail.com>
    media: budget-core: Improve exception handling in budget_register()

Bodo Stroesser <bstroesser@ts.fujitsu.com>
    scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

Stanley Chu <stanley.chu@mediatek.com>
    scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

Rajendra Nayak <rnayak@codeaurora.org>
    opp: Enable resources again if they were disabled earlier

Liang Chen <cl@rock-chips.com>
    kthread: Do not preempt current task if it is going to call schedule()

Krunoslav Kovac <Krunoslav.Kovac@amd.com>
    drm/amd/display: fix pow() crashing when given base 0

Stylon Wang <stylon.wang@amd.com>
    drm/amd/display: Fix EDID parsing after resume from suspend

Daniel Kolesa <daniel@octaforge.org>
    drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal

Yang Shi <shy828301@gmail.com>
    mm/memory.c: skip spurious TLB flush for retried page fault

Steffen Maier <maier@linux.ibm.com>
    scsi: zfcp: Fix use-after-free in request timeout handlers

zhangyi (F) <yi.zhang@huawei.com>
    jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()

Jan Kara <jack@suse.cz>
    ext4: fix checking of directory entry validity for inline directories

Kaike Wan <kaike.wan@intel.com>
    RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request

Charan Teja Reddy <charante@codeaurora.org>
    mm, page_alloc: fix core hung in free_pcppages_bulk()

Doug Berger <opendmb@gmail.com>
    mm: include CMA pages in lowmem_reserve at boot

Hugh Dickins <hughd@google.com>
    uprobes: __replace_page() avoid BUG in munlock_vma_page()

Wei Yongjun <weiyongjun1@huawei.com>
    kernel/relay.c: fix memleak on destroy relay channel

Jann Horn <jannh@google.com>
    romfs: fix uninitialized memory leak in romfs_dev_read()

Lukas Wunner <lukas@wunner.de>
    spi: Prevent adding devices below an unregistering controller

Oleksij Rempel <linux@rempel-privat.de>
    can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocated

Oleksij Rempel <linux@rempel-privat.de>
    can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in j1939_tp_txtimer()

Mike Pozulp <pozulp.kernel@gmail.com>
    ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion

Mike Pozulp <pozulp.kernel@gmail.com>
    ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book

David Sterba <dsterba@suse.com>
    btrfs: add wrapper for transaction abort predicate

Josef Bacik <josef@toxicpanda.com>
    btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases

Josef Bacik <josef@toxicpanda.com>
    btrfs: don't show full path of bind mounts in subvol=

Marcos Paulo de Souza <mpdesouza@suse.com>
    btrfs: export helpers for subvolume name/id resolution

Coly Li <colyli@suse.de>
    bcache: avoid nr_stripes overflow in bcache_device_init()

Hugh Dickins <hughd@google.com>
    khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

Hugh Dickins <hughd@google.com>
    khugepaged: khugepaged_test_exit() check mmget_still_valid()

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Fix memory leakage when the probe point is not found

Bob Peterson <rpeterso@redhat.com>
    gfs2: Never call gfs2_block_zero_range with an open transaction

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Improve mmap write vs. punch_hole consistency

Chris Wilson <chris@chris-wilson.co.uk>
    drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: support LLVM=1 to switch the default tools to Clang/LLVM

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: replace AS=clang with LLVM_IAS=1

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: remove AS variable

Masahiro Yamada <masahiroy@kernel.org>
    kbuild: remove PYTHON2 variable

Dmitry Golovin <dima@golovin.in>
    x86/boot: kbuild: allow readelf executable to be specified

Masahiro Yamada <masahiroy@kernel.org>
    net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware

Masahiro Yamada <masahiroy@kernel.org>
    net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware

Fangrui Song <maskray@google.com>
    Documentation/llvm: fix the name of llvm-size

Nick Desaulniers <ndesaulniers@google.com>
    Documentation/llvm: add documentation on building w/ Clang/LLVM


-------------

Diffstat:

 Documentation/kbuild/index.rst                     |   1 +
 Documentation/kbuild/kbuild.rst                    |   5 +
 Documentation/kbuild/llvm.rst                      |  87 +++++++++
 MAINTAINERS                                        |   1 +
 Makefile                                           |  42 +++--
 arch/alpha/include/asm/io.h                        |   8 +-
 arch/arm64/Makefile                                |   1 +
 arch/arm64/kernel/vdso32/Makefile                  |   2 +-
 arch/m68k/include/asm/m53xxacr.h                   |   6 +-
 arch/mips/kernel/setup.c                           |   2 +-
 arch/powerpc/platforms/pseries/ras.c               |   1 -
 arch/s390/kernel/ptrace.c                          |   7 +-
 arch/s390/kernel/runtime_instr.c                   |   2 +-
 arch/x86/boot/compressed/Makefile                  |   2 +-
 arch/x86/kvm/x86.c                                 |   2 +-
 arch/x86/pci/xen.c                                 |   1 +
 drivers/cpufreq/intel_pstate.c                     |   1 +
 drivers/firmware/efi/efi.c                         |   2 +
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   1 +
 .../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c  |   2 +-
 drivers/gpu/drm/amd/display/include/fixed31_32.h   |   3 +
 drivers/gpu/drm/ttm/ttm_bo_vm.c                    |   4 +-
 drivers/gpu/drm/vgem/vgem_drv.c                    |  27 ---
 drivers/infiniband/hw/bnxt_re/main.c               |   3 +-
 drivers/infiniband/hw/hfi1/tid_rdma.c              |   1 +
 drivers/input/mouse/psmouse-base.c                 |   2 +-
 drivers/md/bcache/super.c                          |  12 +-
 drivers/media/pci/ttpci/budget-core.c              |  11 +-
 drivers/media/platform/davinci/vpss.c              |  20 +-
 drivers/media/platform/qcom/camss/camss.c          |  30 ++-
 drivers/net/bonding/bond_main.c                    |  42 ++++-
 drivers/net/dsa/b53/b53_common.c                   |   2 +
 drivers/net/ethernet/amazon/ena/ena_netdev.c       |  19 +-
 drivers/net/ethernet/cortina/gemini.c              |   4 +-
 drivers/net/ethernet/freescale/fec_main.c          |   4 +-
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h  |   2 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c      |  35 +++-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   3 +
 drivers/net/hyperv/netvsc_drv.c                    |   2 +-
 drivers/net/wan/Kconfig                            |   2 +-
 drivers/net/wan/Makefile                           |  12 +-
 drivers/opp/core.c                                 |  10 +-
 drivers/rtc/rtc-goldfish.c                         |   1 +
 drivers/s390/scsi/zfcp_fsf.c                       |   4 +-
 drivers/scsi/libfc/fc_disc.c                       |  12 +-
 drivers/scsi/qla2xxx/qla_os.c                      |   4 -
 drivers/scsi/ufs/ufs_quirks.h                      |   1 +
 drivers/scsi/ufs/ufshcd.c                          |   2 +
 drivers/spi/Kconfig                                |   3 +
 drivers/spi/spi-stm32.c                            |  27 ++-
 drivers/spi/spi.c                                  |  21 ++-
 drivers/target/target_core_user.c                  |   2 +-
 drivers/vfio/vfio_iommu_type1.c                    |  71 ++++++-
 drivers/video/fbdev/efifb.c                        |   2 +-
 drivers/virtio/virtio_ring.c                       |   3 +
 drivers/xen/preempt.c                              |   2 +-
 drivers/xen/swiotlb-xen.c                          |   8 +-
 fs/afs/dynroot.c                                   |  20 +-
 fs/btrfs/block-group.c                             |   2 +-
 fs/btrfs/ctree.h                                   |   2 +
 fs/btrfs/delayed-inode.c                           |   2 +-
 fs/btrfs/export.c                                  |   8 +-
 fs/btrfs/export.h                                  |   5 +
 fs/btrfs/extent-tree.c                             |  10 +-
 fs/btrfs/extent_io.c                               |   2 +-
 fs/btrfs/scrub.c                                   |   2 +-
 fs/btrfs/super.c                                   |  20 +-
 fs/btrfs/transaction.c                             |  30 +--
 fs/btrfs/transaction.h                             |  12 ++
 fs/ceph/mds_client.c                               |   3 +-
 fs/eventpoll.c                                     |  19 +-
 fs/ext4/block_validity.c                           |  36 ++--
 fs/ext4/namei.c                                    |  22 ++-
 fs/gfs2/bmap.c                                     |  68 ++++---
 fs/jbd2/journal.c                                  |   4 +-
 fs/jffs2/dir.c                                     |   6 +-
 fs/romfs/storage.c                                 |   4 +-
 fs/signalfd.c                                      |  10 +-
 fs/xfs/xfs_sysfs.h                                 |   6 +-
 fs/xfs/xfs_trans_dquot.c                           |   2 +-
 kernel/events/uprobes.c                            |   2 +-
 kernel/kthread.c                                   |  17 +-
 kernel/relay.c                                     |   1 +
 mm/hugetlb.c                                       |  24 +--
 mm/khugepaged.c                                    |   7 +-
 mm/memory.c                                        |   3 +
 mm/page_alloc.c                                    |   7 +-
 net/can/j1939/socket.c                             |  14 ++
 net/can/j1939/transport.c                          |  89 +++++++--
 net/core/filter.c                                  |  49 +++--
 net/netfilter/nft_exthdr.c                         |   4 +-
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c            |   2 +
 scripts/kconfig/qconf.cc                           |  70 +++----
 sound/pci/hda/patch_realtek.c                      |   2 +
 sound/soc/codecs/msm8916-wcd-analog.c              |   4 +-
 sound/soc/intel/atom/sst-mfld-platform-pcm.c       |   5 +-
 sound/soc/qcom/qdsp6/q6afe-dai.c                   | 210 ++++++++++-----------
 sound/soc/qcom/qdsp6/q6routing.c                   |  16 ++
 tools/objtool/Makefile                             |   6 +
 tools/perf/util/probe-finder.c                     |   2 +-
 tools/testing/selftests/cgroup/cgroup_util.c       |   2 +-
 101 files changed, 956 insertions(+), 464 deletions(-)

[PATCH 5.4 001/107] Documentation/llvm: add documentation on building w/ Clang/LLVM

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

commit fcf1b6a35c16ac500fa908a4022238e5d666eabf upstream.

added to kbuild documentation. Provides more official info on building
kernels with Clang and LLVM than our wiki.

Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/kbuild/index.rst |    1 
 Documentation/kbuild/llvm.rst  |   80 +++++++++++++++++++++++++++++++++++++++++
 MAINTAINERS                    |    1 
 3 files changed, 82 insertions(+)
 create mode 100644 Documentation/kbuild/llvm.rst

--- a/Documentation/kbuild/index.rst
+++ b/Documentation/kbuild/index.rst
@@ -19,6 +19,7 @@ Kernel Build System
 
     issues
     reproducible-builds
+    llvm
 
 .. only::  subproject and html
 
--- /dev/null
+++ b/Documentation/kbuild/llvm.rst
@@ -0,0 +1,80 @@
+==============================
+Building Linux with Clang/LLVM
+==============================
+
+This document covers how to build the Linux kernel with Clang and LLVM
+utilities.
+
+About
+-----
+
+The Linux kernel has always traditionally been compiled with GNU toolchains
+such as GCC and binutils. Ongoing work has allowed for `Clang
+<https://clang.llvm.org/>`_ and `LLVM <https://llvm.org/>`_ utilities to be
+used as viable substitutes. Distributions such as `Android
+<https://www.android.com/>`_, `ChromeOS
+<https://www.chromium.org/chromium-os>`_, and `OpenMandriva
+<https://www.openmandriva.org/>`_ use Clang built kernels.  `LLVM is a
+collection of toolchain components implemented in terms of C++ objects
+<https://www.aosabook.org/en/llvm.html>`_. Clang is a front-end to LLVM that
+supports C and the GNU C extensions required by the kernel, and is pronounced
+"klang," not "see-lang."
+
+Clang
+-----
+
+The compiler used can be swapped out via `CC=` command line argument to `make`.
+`CC=` should be set when selecting a config and during a build.
+
+	make CC=clang defconfig
+
+	make CC=clang
+
+Cross Compiling
+---------------
+
+A single Clang compiler binary will typically contain all supported backends,
+which can help simplify cross compiling.
+
+	ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
+
+`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
+`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
+example:
+
+	clang --target aarch64-linux-gnu foo.c
+
+LLVM Utilities
+--------------
+
+LLVM has substitutes for GNU binutils utilities. These can be invoked as
+additional parameters to `make`.
+
+	make CC=clang AS=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-objsize \\
+	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
+	  HOSTLD=ld.lld
+
+Getting Help
+------------
+
+- `Website <https://clangbuiltlinux.github.io/>`_
+- `Mailing List <https://groups.google.com/forum/#!forum/clang-built-linux>`_: <clang-built-linux@googlegroups.com>
+- `Issue Tracker <https://github.com/ClangBuiltLinux/linux/issues>`_
+- IRC: #clangbuiltlinux on chat.freenode.net
+- `Telegram <https://t.me/ClangBuiltLinux>`_: @ClangBuiltLinux
+- `Wiki <https://github.com/ClangBuiltLinux/linux/wiki>`_
+- `Beginner Bugs <https://github.com/ClangBuiltLinux/linux/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22>`_
+
+Getting LLVM
+-------------
+
+- http://releases.llvm.org/download.html
+- https://github.com/llvm/llvm-project
+- https://llvm.org/docs/GettingStarted.html
+- https://llvm.org/docs/CMake.html
+- https://apt.llvm.org/
+- https://www.archlinux.org/packages/extra/x86_64/llvm/
+- https://github.com/ClangBuiltLinux/tc-build
+- https://github.com/ClangBuiltLinux/linux/wiki/Building-Clang-from-source
+- https://android.googlesource.com/platform/prebuilts/clang/host/linux-x86/
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4028,6 +4028,7 @@ B:	https://github.com/ClangBuiltLinux/li
 C:	irc://chat.freenode.net/clangbuiltlinux
 S:	Supported
 K:	\b(?i:clang|llvm)\b
+F:	Documentation/kbuild/llvm.rst
 
 CLEANCACHE API
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

[PATCH 5.4 002/107] Documentation/llvm: fix the name of llvm-size

[Greg Kroah-Hartman]

From: Fangrui Song <maskray@google.com>

commit 0f44fbc162b737ff6251ae248184390ae2279fee upstream.

The tool is called llvm-size, not llvm-objsize.

Fixes: fcf1b6a35c16 ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/kbuild/llvm.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -51,7 +51,7 @@ LLVM has substitutes for GNU binutils ut
 additional parameters to `make`.
 
 	make CC=clang AS=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
-	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-objsize \\
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
 	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
 	  HOSTLD=ld.lld
 

[PATCH 5.4 003/107] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d upstream.

As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.

wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.

I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.

Instead, the kernel.org m68k GCC [1] successfully built it.

Allowing a user to pass in CROSS_COMPILE_M68K= is handier.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/Kconfig  |    2 +-
 drivers/net/wan/Makefile |   12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -200,7 +200,7 @@ config WANXL_BUILD_FIRMWARE
 	depends on WANXL && !PREVENT_FIRMWARE_BUILD
 	help
 	  Allows you to rebuild firmware run by the QUICC processor.
-	  It requires as68k, ld68k and hexdump programs.
+	  It requires m68k toolchains and hexdump programs.
 
 	  You should never need this option, say N.
 
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,17 +40,17 @@ $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
 
 ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
 ifeq ($(ARCH),m68k)
-  AS68K = $(AS)
-  LD68K = $(LD)
+  M68KAS = $(AS)
+  M68KLD = $(LD)
 else
-  AS68K = as68k
-  LD68K = ld68k
+  M68KAS = $(CROSS_COMPILE_M68K)as
+  M68KLD = $(CROSS_COMPILE_M68K)ld
 endif
 
 quiet_cmd_build_wanxlfw = BLD FW  $@
       cmd_build_wanxlfw = \
-	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
-	$(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+	$(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
 	hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x  ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
 	rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
 

[PATCH 5.4 004/107] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 734f3719d3438f9cc181d674c33ca9762e9148a1 upstream.

The firmware source, wanxlfw.S, is currently compiled by the combo of
$(CPP) and $(M68KAS). This is not what we usually do for compiling *.S
files. In fact, this Makefile is the only user of $(AS) in the kernel
build.

Instead of combining $(CPP) and (AS) from different tool sets, using
$(M68KCC) as an assembler driver is simpler, and saner.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/Makefile |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,16 +40,16 @@ $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
 
 ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
 ifeq ($(ARCH),m68k)
-  M68KAS = $(AS)
+  M68KCC = $(CC)
   M68KLD = $(LD)
 else
-  M68KAS = $(CROSS_COMPILE_M68K)as
+  M68KCC = $(CROSS_COMPILE_M68K)gcc
   M68KLD = $(CROSS_COMPILE_M68K)ld
 endif
 
 quiet_cmd_build_wanxlfw = BLD FW  $@
       cmd_build_wanxlfw = \
-	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+	$(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $(obj)/wanxlfw.o $<; \
 	$(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
 	hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x  ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
 	rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o

[PATCH 5.4 005/107] x86/boot: kbuild: allow readelf executable to be specified

[Greg Kroah-Hartman]

From: Dmitry Golovin <dima@golovin.in>

commit eefb8c124fd969e9a174ff2bedff86aa305a7438 upstream.

Introduce a new READELF variable to top-level Makefile, so the name of
readelf binary can be specified.

Before this change the name of the binary was hardcoded to
"$(CROSS_COMPILE)readelf" which might not be present for every
toolchain.

This allows to build with LLVM Object Reader by using make parameter
READELF=llvm-readelf.

Link: https://github.com/ClangBuiltLinux/linux/issues/771
Signed-off-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile                          |    3 ++-
 arch/x86/boot/compressed/Makefile |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -414,6 +414,7 @@ STRIP		= $(CROSS_COMPILE)strip
 OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 OBJSIZE		= $(CROSS_COMPILE)size
+READELF		= $(CROSS_COMPILE)readelf
 PAHOLE		= pahole
 LEX		= flex
 YACC		= bison
@@ -472,7 +473,7 @@ GCC_PLUGINS_CFLAGS :=
 CLANG_FLAGS :=
 
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE PAHOLE LEX YACC AWK INSTALLKERNEL
+export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -102,7 +102,7 @@ vmlinux-objs-$(CONFIG_EFI_MIXED) += $(ob
 quiet_cmd_check_data_rel = DATAREL $@
 define cmd_check_data_rel
 	for obj in $(filter %.o,$^); do \
-		${CROSS_COMPILE}readelf -S $$obj | grep -qF .rel.local && { \
+		$(READELF) -S $$obj | grep -qF .rel.local && { \
 			echo "error: $$obj has data relocations!" >&2; \
 			exit 1; \
 		} || true; \

[PATCH 5.4 006/107] kbuild: remove PYTHON2 variable

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 94f7345b712405b79647a6a4bf8ccbd0d78fa69d upstream.

Python 2 has retired. There is no user of this variable.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -423,7 +423,6 @@ INSTALLKERNEL  := installkernel
 DEPMOD		= /sbin/depmod
 PERL		= perl
 PYTHON		= python
-PYTHON2		= python2
 PYTHON3		= python3
 CHECK		= sparse
 BASH		= bash
@@ -474,7 +473,7 @@ CLANG_FLAGS :=
 
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
-export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
+export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS

[PATCH 5.4 007/107] kbuild: remove AS variable

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit aa824e0c962b532d5073cbb41b2efcd6f5e72bae upstream.

As commit 5ef872636ca7 ("kbuild: get rid of misleading $(AS) from
documents") noted, we rarely use $(AS) directly in the kernel build.

Now that the only/last user of $(AS) in drivers/net/wan/Makefile was
converted to $(CC), $(AS) is no longer used in the build process.

You can still pass in AS=clang, which is just a switch to turn on
the LLVM integrated assembler.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -404,7 +404,6 @@ KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAG
 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 
 # Make variables (CC, etc...)
-AS		= $(CROSS_COMPILE)as
 LD		= $(CROSS_COMPILE)ld
 CC		= $(CROSS_COMPILE)gcc
 CPP		= $(CC) -E
@@ -471,7 +470,7 @@ KBUILD_LDFLAGS :=
 GCC_PLUGINS_CFLAGS :=
 CLANG_FLAGS :=
 
-export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
+export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
@@ -534,7 +533,7 @@ endif
 ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
-ifeq ($(shell $(AS) --version 2>&1 | head -n 1 | grep clang),)
+ifeq ($(if $(AS),$(shell $(AS) --version 2>&1 | head -n 1 | grep clang)),)
 CLANG_FLAGS	+= -no-integrated-as
 endif
 CLANG_FLAGS	+= -Werror=unknown-warning-option

[PATCH 5.4 008/107] kbuild: replace AS=clang with LLVM_IAS=1

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit 7e20e47c70f810d678d02941fa3c671209c4ca97 upstream.

The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.

AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/kbuild/llvm.rst |    5 ++++-
 Makefile                      |    2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -50,11 +50,14 @@ LLVM Utilities
 LLVM has substitutes for GNU binutils utilities. These can be invoked as
 additional parameters to `make`.
 
-	make CC=clang AS=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
+	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
 	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
 	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
 	  HOSTLD=ld.lld
 
+Currently, the integrated assembler is disabled by default. You can pass
+`LLVM_IAS=1` to enable it.
+
 Getting Help
 ------------
 
--- a/Makefile
+++ b/Makefile
@@ -533,7 +533,7 @@ endif
 ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
-ifeq ($(if $(AS),$(shell $(AS) --version 2>&1 | head -n 1 | grep clang)),)
+ifneq ($(LLVM_IAS),1)
 CLANG_FLAGS	+= -no-integrated-as
 endif
 CLANG_FLAGS	+= -Werror=unknown-warning-option

[PATCH 5.4 009/107] kbuild: support LLVM=1 to switch the default tools to Clang/LLVM

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

commit a0d1c951ef08ed24f35129267e3595d86f57f5d3 upstream.

As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.

Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.

Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.

We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:

  https://lkml.org/lkml/2020/3/28/494
  https://lkml.org/lkml/2020/4/3/43

Some items discussed, but not adopted:

- LLVM_DIR

  When multiple versions of LLVM are installed, I just thought supporting
  LLVM_DIR=/path/to/my/llvm/bin/ might be useful.

  CC      = $(LLVM_DIR)clang
  LD      = $(LLVM_DIR)ld.lld
    ...

  However, we can handle this by modifying PATH. So, we decided to not do
  this.

- LLVM_SUFFIX

  Some distributions (e.g. Debian) package specific versions of LLVM with
  naming conventions that use the version as a suffix.

  CC      = clang$(LLVM_SUFFIX)
  LD      = ld.lld(LLVM_SUFFIX)
    ...

  will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
  but the suffixed versions in /usr/bin/ are symlinks to binaries in
  /usr/lib/llvm-#/bin/, so this can also be handled by PATH.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/kbuild/kbuild.rst |    5 +++++
 Documentation/kbuild/llvm.rst   |    8 ++++++--
 Makefile                        |   29 +++++++++++++++++++++++------
 tools/objtool/Makefile          |    6 ++++++
 4 files changed, 40 insertions(+), 8 deletions(-)

--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -262,3 +262,8 @@ KBUILD_BUILD_USER, KBUILD_BUILD_HOST
 These two variables allow to override the user@host string displayed during
 boot and in /proc/version. The default value is the output of the commands
 whoami and host, respectively.
+
+LLVM
+----
+If this variable is set to 1, Kbuild will use Clang and LLVM utilities instead
+of GCC and GNU binutils to build the kernel.
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -47,8 +47,12 @@ example:
 LLVM Utilities
 --------------
 
-LLVM has substitutes for GNU binutils utilities. These can be invoked as
-additional parameters to `make`.
+LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
+to enable them.
+
+	make LLVM=1
+
+They can be enabled individually. The full list of the parameters:
 
 	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
 	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
--- a/Makefile
+++ b/Makefile
@@ -394,8 +394,13 @@ HOST_LFS_CFLAGS := $(shell getconf LFS_C
 HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
 HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
 
-HOSTCC       = gcc
-HOSTCXX      = g++
+ifneq ($(LLVM),)
+HOSTCC	= clang
+HOSTCXX	= clang++
+else
+HOSTCC	= gcc
+HOSTCXX	= g++
+endif
 KBUILD_HOSTCFLAGS   := -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 \
 		-fomit-frame-pointer -std=gnu89 $(HOST_LFS_CFLAGS) \
 		$(HOSTCFLAGS)
@@ -404,16 +409,28 @@ KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAG
 KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 
 # Make variables (CC, etc...)
-LD		= $(CROSS_COMPILE)ld
-CC		= $(CROSS_COMPILE)gcc
 CPP		= $(CC) -E
+ifneq ($(LLVM),)
+CC		= clang
+LD		= ld.lld
+AR		= llvm-ar
+NM		= llvm-nm
+OBJCOPY		= llvm-objcopy
+OBJDUMP		= llvm-objdump
+READELF		= llvm-readelf
+OBJSIZE		= llvm-size
+STRIP		= llvm-strip
+else
+CC		= $(CROSS_COMPILE)gcc
+LD		= $(CROSS_COMPILE)ld
 AR		= $(CROSS_COMPILE)ar
 NM		= $(CROSS_COMPILE)nm
-STRIP		= $(CROSS_COMPILE)strip
 OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
-OBJSIZE		= $(CROSS_COMPILE)size
 READELF		= $(CROSS_COMPILE)readelf
+OBJSIZE		= $(CROSS_COMPILE)size
+STRIP		= $(CROSS_COMPILE)strip
+endif
 PAHOLE		= pahole
 LEX		= flex
 YACC		= bison
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -3,9 +3,15 @@ include ../scripts/Makefile.include
 include ../scripts/Makefile.arch
 
 # always use the host compiler
+ifneq ($(LLVM),)
+HOSTAR	?= llvm-ar
+HOSTCC	?= clang
+HOSTLD	?= ld.lld
+else
 HOSTAR	?= ar
 HOSTCC	?= gcc
 HOSTLD	?= ld
+endif
 AR	 = $(HOSTAR)
 CC	 = $(HOSTCC)
 LD	 = $(HOSTLD)

[PATCH 5.4 010/107] drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()

[Greg Kroah-Hartman]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 119c53d2d4044c59c450c4f5a568d80b9d861856 ]

drm_gem_dumb_map_offset() now exists and does everything
vgem_gem_dump_map does and *ought* to do.

In particular, vgem_gem_dumb_map() was trying to reject mmapping an
imported dmabuf by checking the existence of obj->filp. Unfortunately,
we always allocated an obj->filp, even if unused for an imported dmabuf.
Instead, the drm_gem_dumb_map_offset(), since commit 90378e589192
("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the
obj->import_attach to reject such invalid mmaps.

This prevents vgem from allowing userspace mmapping the dumb handle and
attempting to incorrectly fault in remote pages belonging to another
device, where there may not even be a struct page.

v2: Use the default drm_gem_dumb_map_offset() callback

Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.13+
Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vgem/vgem_drv.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c
index 909eba43664a2..204d1df5a21d1 100644
--- a/drivers/gpu/drm/vgem/vgem_drv.c
+++ b/drivers/gpu/drm/vgem/vgem_drv.c
@@ -229,32 +229,6 @@ static int vgem_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
 	return 0;
 }
 
-static int vgem_gem_dumb_map(struct drm_file *file, struct drm_device *dev,
-			     uint32_t handle, uint64_t *offset)
-{
-	struct drm_gem_object *obj;
-	int ret;
-
-	obj = drm_gem_object_lookup(file, handle);
-	if (!obj)
-		return -ENOENT;
-
-	if (!obj->filp) {
-		ret = -EINVAL;
-		goto unref;
-	}
-
-	ret = drm_gem_create_mmap_offset(obj);
-	if (ret)
-		goto unref;
-
-	*offset = drm_vma_node_offset_addr(&obj->vma_node);
-unref:
-	drm_gem_object_put_unlocked(obj);
-
-	return ret;
-}
-
 static struct drm_ioctl_desc vgem_ioctls[] = {
 	DRM_IOCTL_DEF_DRV(VGEM_FENCE_ATTACH, vgem_fence_attach_ioctl, DRM_RENDER_ALLOW),
 	DRM_IOCTL_DEF_DRV(VGEM_FENCE_SIGNAL, vgem_fence_signal_ioctl, DRM_RENDER_ALLOW),
@@ -448,7 +422,6 @@ static struct drm_driver vgem_driver = {
 	.fops				= &vgem_driver_fops,
 
 	.dumb_create			= vgem_gem_dumb_create,
-	.dumb_map_offset		= vgem_gem_dumb_map,
 
 	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
 	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
-- 
2.25.1

[PATCH 5.4 011/107] gfs2: Improve mmap write vs. punch_hole consistency

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 39c3a948ecf6e7b8f55f0e91a5febc924fede4d7 ]

When punching a hole in a file, use filemap_write_and_wait_range to
write back any dirty pages in the range of the hole.  As a side effect,
if the hole isn't page aligned, this marks unaligned pages at the
beginning and the end of the hole read-only.  This is required when the
block size is smaller than the page size: when those pages are written
to again after the hole punching, we must make sure that page_mkwrite is
called for those pages so that the page will be fully allocated and any
blocks turned into holes from the hole punching will be reallocated.
(If a page is writably mapped, page_mkwrite won't be called.)

Fixes xfstest generic/567.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index adbb8fef22162..4846e0c47e6af 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -2442,8 +2442,16 @@ int __gfs2_punch_hole(struct file *file, loff_t offset, loff_t length)
 	struct inode *inode = file_inode(file);
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	unsigned int blocksize = i_blocksize(inode);
+	loff_t start, end;
 	int error;
 
+	start = round_down(offset, blocksize);
+	end = round_up(offset + length, blocksize) - 1;
+	error = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	if (error)
+		return error;
+
 	if (gfs2_is_jdata(ip))
 		error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_JDATA,
 					 GFS2_JTRUNC_REVOKES);
@@ -2457,9 +2465,8 @@ int __gfs2_punch_hole(struct file *file, loff_t offset, loff_t length)
 		if (error)
 			goto out;
 	} else {
-		unsigned int start_off, end_len, blocksize;
+		unsigned int start_off, end_len;
 
-		blocksize = i_blocksize(inode);
 		start_off = offset & (blocksize - 1);
 		end_len = (offset + length) & (blocksize - 1);
 		if (start_off) {
-- 
2.25.1

[PATCH 5.4 012/107] gfs2: Never call gfs2_block_zero_range with an open transaction

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 70499cdfeb3625c87eebe4f7a7ea06fa7447e5df ]

Before this patch, some functions started transactions then they called
gfs2_block_zero_range. However, gfs2_block_zero_range, like writes, can
start transactions, which results in a recursive transaction error.
For example:

do_shrink
   trunc_start
      gfs2_trans_begin <------------------------------------------------
         gfs2_block_zero_range
            iomap_zero_range(inode, from, length, NULL, &gfs2_iomap_ops);
               iomap_apply ... iomap_zero_range_actor
                  iomap_begin
                     gfs2_iomap_begin
                        gfs2_iomap_begin_write
                  actor (iomap_zero_range_actor)
		     iomap_zero
			iomap_write_begin
			   gfs2_iomap_page_prepare
			      gfs2_trans_begin <------------------------

This patch reorders the callers of gfs2_block_zero_range so that they
only start their transactions after the call. It also adds a BUG_ON to
ensure this doesn't happen again.

Fixes: 2257e468a63b ("gfs2: implement gfs2_block_zero_range using iomap_zero_range")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 69 ++++++++++++++++++++++++++++----------------------
 1 file changed, 39 insertions(+), 30 deletions(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 4846e0c47e6af..50fa3e08c02f3 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1350,9 +1350,15 @@ int gfs2_extent_map(struct inode *inode, u64 lblock, int *new, u64 *dblock, unsi
 	return ret;
 }
 
+/*
+ * NOTE: Never call gfs2_block_zero_range with an open transaction because it
+ * uses iomap write to perform its actions, which begin their own transactions
+ * (iomap_begin, page_prepare, etc.)
+ */
 static int gfs2_block_zero_range(struct inode *inode, loff_t from,
 				 unsigned int length)
 {
+	BUG_ON(current->journal_info);
 	return iomap_zero_range(inode, from, length, NULL, &gfs2_iomap_ops);
 }
 
@@ -1413,6 +1419,16 @@ static int trunc_start(struct inode *inode, u64 newsize)
 	u64 oldsize = inode->i_size;
 	int error;
 
+	if (!gfs2_is_stuffed(ip)) {
+		unsigned int blocksize = i_blocksize(inode);
+		unsigned int offs = newsize & (blocksize - 1);
+		if (offs) {
+			error = gfs2_block_zero_range(inode, newsize,
+						      blocksize - offs);
+			if (error)
+				return error;
+		}
+	}
 	if (journaled)
 		error = gfs2_trans_begin(sdp, RES_DINODE + RES_JDATA, GFS2_JTRUNC_REVOKES);
 	else
@@ -1426,19 +1442,10 @@ static int trunc_start(struct inode *inode, u64 newsize)
 
 	gfs2_trans_add_meta(ip->i_gl, dibh);
 
-	if (gfs2_is_stuffed(ip)) {
+	if (gfs2_is_stuffed(ip))
 		gfs2_buffer_clear_tail(dibh, sizeof(struct gfs2_dinode) + newsize);
-	} else {
-		unsigned int blocksize = i_blocksize(inode);
-		unsigned int offs = newsize & (blocksize - 1);
-		if (offs) {
-			error = gfs2_block_zero_range(inode, newsize,
-						      blocksize - offs);
-			if (error)
-				goto out;
-		}
+	else
 		ip->i_diskflags |= GFS2_DIF_TRUNC_IN_PROG;
-	}
 
 	i_size_write(inode, newsize);
 	ip->i_inode.i_mtime = ip->i_inode.i_ctime = current_time(&ip->i_inode);
@@ -2446,25 +2453,7 @@ int __gfs2_punch_hole(struct file *file, loff_t offset, loff_t length)
 	loff_t start, end;
 	int error;
 
-	start = round_down(offset, blocksize);
-	end = round_up(offset + length, blocksize) - 1;
-	error = filemap_write_and_wait_range(inode->i_mapping, start, end);
-	if (error)
-		return error;
-
-	if (gfs2_is_jdata(ip))
-		error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_JDATA,
-					 GFS2_JTRUNC_REVOKES);
-	else
-		error = gfs2_trans_begin(sdp, RES_DINODE, 0);
-	if (error)
-		return error;
-
-	if (gfs2_is_stuffed(ip)) {
-		error = stuffed_zero_range(inode, offset, length);
-		if (error)
-			goto out;
-	} else {
+	if (!gfs2_is_stuffed(ip)) {
 		unsigned int start_off, end_len;
 
 		start_off = offset & (blocksize - 1);
@@ -2487,6 +2476,26 @@ int __gfs2_punch_hole(struct file *file, loff_t offset, loff_t length)
 		}
 	}
 
+	start = round_down(offset, blocksize);
+	end = round_up(offset + length, blocksize) - 1;
+	error = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	if (error)
+		return error;
+
+	if (gfs2_is_jdata(ip))
+		error = gfs2_trans_begin(sdp, RES_DINODE + 2 * RES_JDATA,
+					 GFS2_JTRUNC_REVOKES);
+	else
+		error = gfs2_trans_begin(sdp, RES_DINODE, 0);
+	if (error)
+		return error;
+
+	if (gfs2_is_stuffed(ip)) {
+		error = stuffed_zero_range(inode, offset, length);
+		if (error)
+			goto out;
+	}
+
 	if (gfs2_is_jdata(ip)) {
 		BUG_ON(!current->journal_info);
 		gfs2_journaled_truncate_range(inode, offset, length);
-- 
2.25.1

[PATCH 5.4 013/107] perf probe: Fix memory leakage when the probe point is not found

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 12d572e785b15bc764e956caaa8a4c846fd15694 ]

Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.

Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.

The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.

This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.

Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-finder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index dc9d495e3d6ab..849d8d2e5976b 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1362,7 +1362,7 @@ int debuginfo__find_trace_events(struct debuginfo *dbg,
 	tf.ntevs = 0;
 
 	ret = debuginfo__find_probes(dbg, &tf.pf);
-	if (ret < 0) {
+	if (ret < 0 || tf.ntevs == 0) {
 		for (i = 0; i < tf.ntevs; i++)
 			clear_probe_trace_event(&tf.tevs[i]);
 		zfree(tevs);
-- 
2.25.1

[PATCH 5.4 014/107] khugepaged: khugepaged_test_exit() check mmget_still_valid()

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

[ Upstream commit bbe98f9cadff58cdd6a4acaeba0efa8565dabe65 ]

Move collapse_huge_page()'s mmget_still_valid() check into
khugepaged_test_exit() itself.  collapse_huge_page() is used for anon THP
only, and earned its mmget_still_valid() check because it inserts a huge
pmd entry in place of the page table's pmd entry; whereas
collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp()
merely clears the page table's pmd entry.  But core dumping without mmap
lock must have been as open to mistaking a racily cleared pmd entry for a
page table at physical page 0, as exit_mmap() was.  And we certainly have
no interest in mapping as a THP once dumping core.

Fixes: 59ea6d06cfa9 ("coredump: fix race condition between collapse_huge_page() and core dumping")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021217020.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/khugepaged.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 719f49d1fba2f..76e3e90dbc16e 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -401,7 +401,7 @@ static void insert_to_mm_slots_hash(struct mm_struct *mm,
 
 static inline int khugepaged_test_exit(struct mm_struct *mm)
 {
-	return atomic_read(&mm->mm_users) == 0;
+	return atomic_read(&mm->mm_users) == 0 || !mmget_still_valid(mm);
 }
 
 static bool hugepage_vma_check(struct vm_area_struct *vma,
@@ -1019,9 +1019,6 @@ static void collapse_huge_page(struct mm_struct *mm,
 	 * handled by the anon_vma lock + PG_lock.
 	 */
 	down_write(&mm->mmap_sem);
-	result = SCAN_ANY_PROCESS;
-	if (!mmget_still_valid(mm))
-		goto out;
 	result = hugepage_vma_revalidate(mm, address, &vma);
 	if (result)
 		goto out;
-- 
2.25.1

[PATCH 5.4 015/107] khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

[ Upstream commit f3f99d63a8156c7a4a6b20aac22b53c5579c7dc1 ]

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit().  I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().

Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/khugepaged.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 76e3e90dbc16e..3623d1c5343f2 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -438,7 +438,7 @@ int __khugepaged_enter(struct mm_struct *mm)
 		return -ENOMEM;
 
 	/* __khugepaged_exit() must not run from under us */
-	VM_BUG_ON_MM(khugepaged_test_exit(mm), mm);
+	VM_BUG_ON_MM(atomic_read(&mm->mm_users) == 0, mm);
 	if (unlikely(test_and_set_bit(MMF_VM_HUGEPAGE, &mm->flags))) {
 		free_mm_slot(mm_slot);
 		return 0;
-- 
2.25.1

[PATCH 5.4 016/107] bcache: avoid nr_stripes overflow in bcache_device_init()

[Greg Kroah-Hartman]

From: Coly Li <colyli@suse.de>

[ Upstream commit 65f0f017e7be8c70330372df23bcb2a407ecf02d ]

For some block devices which large capacity (e.g. 8TB) but small io_opt
size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu-
lated by,
	DIV_ROUND_UP_ULL(sectors, d->stripe_size);
might be overflow to the unsigned int bcache_device->nr_stripes.

This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL()
and after the value is checked to be available in unsigned int range,
sets it to bache_device->nr_stripes. Then the overflow is avoided.

Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 25ad64a3919f6..2cbfcd99b7ee7 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -816,19 +816,19 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
 	struct request_queue *q;
 	const size_t max_stripes = min_t(size_t, INT_MAX,
 					 SIZE_MAX / sizeof(atomic_t));
-	size_t n;
+	uint64_t n;
 	int idx;
 
 	if (!d->stripe_size)
 		d->stripe_size = 1 << 31;
 
-	d->nr_stripes = DIV_ROUND_UP_ULL(sectors, d->stripe_size);
-
-	if (!d->nr_stripes || d->nr_stripes > max_stripes) {
-		pr_err("nr_stripes too large or invalid: %u (start sector beyond end of disk?)",
-			(unsigned int)d->nr_stripes);
+	n = DIV_ROUND_UP_ULL(sectors, d->stripe_size);
+	if (!n || n > max_stripes) {
+		pr_err("nr_stripes too large or invalid: %llu (start sector beyond end of disk?)\n",
+			n);
 		return -ENOMEM;
 	}
+	d->nr_stripes = n;
 
 	n = d->nr_stripes * sizeof(atomic_t);
 	d->stripe_sectors_dirty = kvzalloc(n, GFP_KERNEL);
-- 
2.25.1

[PATCH 5.4 017/107] btrfs: export helpers for subvolume name/id resolution

[Greg Kroah-Hartman]

From: Marcos Paulo de Souza <mpdesouza@suse.com>

[ Upstream commit c0c907a47dccf2cf26251a8fb4a8e7a3bf79ce84 ]

The functions will be used outside of export.c and super.c to allow
resolving subvolume name from a given id, eg. for subvolume deletion by
id ioctl.

Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ split from the next patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ctree.h  | 2 ++
 fs/btrfs/export.c | 8 ++++----
 fs/btrfs/export.h | 5 +++++
 fs/btrfs/super.c  | 8 ++++----
 4 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 2374f3f6f3b70..18357b054a91e 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2965,6 +2965,8 @@ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
 int btrfs_parse_options(struct btrfs_fs_info *info, char *options,
 			unsigned long new_flags);
 int btrfs_sync_fs(struct super_block *sb, int wait);
+char *btrfs_get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
+					  u64 subvol_objectid);
 
 static inline __printf(2, 3) __cold
 void btrfs_no_printk(const struct btrfs_fs_info *fs_info, const char *fmt, ...)
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index ddf28ecf17f93..93cceeba484cc 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -57,9 +57,9 @@ static int btrfs_encode_fh(struct inode *inode, u32 *fh, int *max_len,
 	return type;
 }
 
-static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
-				       u64 root_objectid, u32 generation,
-				       int check_generation)
+struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
+				u64 root_objectid, u32 generation,
+				int check_generation)
 {
 	struct btrfs_fs_info *fs_info = btrfs_sb(sb);
 	struct btrfs_root *root;
@@ -152,7 +152,7 @@ static struct dentry *btrfs_fh_to_dentry(struct super_block *sb, struct fid *fh,
 	return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
 }
 
-static struct dentry *btrfs_get_parent(struct dentry *child)
+struct dentry *btrfs_get_parent(struct dentry *child)
 {
 	struct inode *dir = d_inode(child);
 	struct btrfs_fs_info *fs_info = btrfs_sb(dir->i_sb);
diff --git a/fs/btrfs/export.h b/fs/btrfs/export.h
index 57488ecd7d4ef..f32f4113c976a 100644
--- a/fs/btrfs/export.h
+++ b/fs/btrfs/export.h
@@ -18,4 +18,9 @@ struct btrfs_fid {
 	u64 parent_root_objectid;
 } __attribute__ ((packed));
 
+struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
+				u64 root_objectid, u32 generation,
+				int check_generation);
+struct dentry *btrfs_get_parent(struct dentry *child);
+
 #endif
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 4b0ee34aa65d5..32c36821cc7b4 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1009,8 +1009,8 @@ out:
 	return error;
 }
 
-static char *get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
-					   u64 subvol_objectid)
+char *btrfs_get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
+					  u64 subvol_objectid)
 {
 	struct btrfs_root *root = fs_info->tree_root;
 	struct btrfs_root *fs_root;
@@ -1421,8 +1421,8 @@ static struct dentry *mount_subvol(const char *subvol_name, u64 subvol_objectid,
 				goto out;
 			}
 		}
-		subvol_name = get_subvol_name_from_objectid(btrfs_sb(mnt->mnt_sb),
-							    subvol_objectid);
+		subvol_name = btrfs_get_subvol_name_from_objectid(
+					btrfs_sb(mnt->mnt_sb), subvol_objectid);
 		if (IS_ERR(subvol_name)) {
 			root = ERR_CAST(subvol_name);
 			subvol_name = NULL;
-- 
2.25.1

[PATCH 5.4 018/107] btrfs: dont show full path of bind mounts in subvol=

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

[ Upstream commit 3ef3959b29c4a5bd65526ab310a1a18ae533172a ]

Chris Murphy reported a problem where rpm ostree will bind mount a bunch
of things for whatever voodoo it's doing.  But when it does this
/proc/mounts shows something like

  /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
  /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0

Despite subvolid=256 being subvol=/foo.  This is because we're just
spitting out the dentry of the mount point, which in the case of bind
mounts is the source path for the mountpoint.  Instead we should spit
out the path to the actual subvol.  Fix this by looking up the name for
the subvolid we have mounted.  With this fix the same test looks like
this

  /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
  /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0

Reported-by: Chris Murphy <chris@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/super.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 32c36821cc7b4..e21cae80c6d58 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1291,6 +1291,7 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry)
 {
 	struct btrfs_fs_info *info = btrfs_sb(dentry->d_sb);
 	const char *compress_type;
+	const char *subvol_name;
 
 	if (btrfs_test_opt(info, DEGRADED))
 		seq_puts(seq, ",degraded");
@@ -1375,8 +1376,13 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry)
 		seq_puts(seq, ",ref_verify");
 	seq_printf(seq, ",subvolid=%llu",
 		  BTRFS_I(d_inode(dentry))->root->root_key.objectid);
-	seq_puts(seq, ",subvol=");
-	seq_dentry(seq, dentry, " \t\n\\");
+	subvol_name = btrfs_get_subvol_name_from_objectid(info,
+			BTRFS_I(d_inode(dentry))->root->root_key.objectid);
+	if (!IS_ERR(subvol_name)) {
+		seq_puts(seq, ",subvol=");
+		seq_escape(seq, subvol_name, " \t\n\\");
+		kfree(subvol_name);
+	}
 	return 0;
 }
 
-- 
2.25.1

[PATCH 5.4 019/107] btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

Eric reported seeing this message while running generic/475

  BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted

Full stack trace:

  BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction)
  BTRFS info (device dm-0): forced readonly
  BTRFS warning (device dm-0): Skipping commit of aborted transaction.
  ------------[ cut here ]------------
  BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure
  BTRFS: Transaction aborted (error -117)
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10
  WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs]
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10
  BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10
  CPU: 3 PID: 23985 Comm: fsstress Tainted: G        W    L    5.8.0-rc4-default+ #1181
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs]
  RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
  RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7
  RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000
  R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70
  FS:  00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0
  Call Trace:
   ? finish_wait+0x90/0x90
   ? __mutex_unlock_slowpath+0x45/0x2a0
   ? lock_acquire+0xa3/0x440
   ? lockref_put_or_lock+0x9/0x30
   ? dput+0x20/0x4a0
   ? dput+0x20/0x4a0
   ? do_raw_spin_unlock+0x4b/0xc0
   ? _raw_spin_unlock+0x1f/0x30
   btrfs_sync_file+0x335/0x490 [btrfs]
   do_fsync+0x38/0x70
   __x64_sys_fsync+0x10/0x20
   do_syscall_64+0x50/0xe0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f6a6ef1b6e3
  Code: Bad RIP value.
  RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
  RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3
  RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c
  R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f
  R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  irq event stamp: 0
  hardirqs last  enabled at (0): [<0000000000000000>] 0x0
  hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
  softirqs last  enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
  softirqs last disabled at (0): [<0000000000000000>] 0x0
  ---[ end trace af146e0e38433456 ]---
  BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted

This ret came from btrfs_write_marked_extents().  If we get an aborted
transaction via EIO before, we'll see it in btree_write_cache_pages()
and return EUCLEAN, which gets printed as "Filesystem corrupted".

Except we shouldn't be returning EUCLEAN here, we need to be returning
EROFS because EUCLEAN is reserved for actual corruption, not IO errors.

We are inconsistent about our handling of BTRFS_FS_STATE_ERROR
elsewhere, but we want to use EROFS for this particular case.  The
original transaction abort has the real error code for why we ended up
with an aborted transaction, all subsequent actions just need to return
EROFS because they may not have a trans handle and have no idea about
the original cause of the abort.

After patch "btrfs: don't WARN if we abort a transaction with EROFS" the
stacktrace will not be dumped either.

Reported-by: Eric Sandeen <esandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add full test stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
---
 fs/btrfs/extent_io.c   | 2 +-
 fs/btrfs/scrub.c       | 2 +-
 fs/btrfs/transaction.c | 5 ++++-
 3 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 035ea5bc692ad..5707bf0575d43 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4073,7 +4073,7 @@ retry:
 	if (!test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
 		ret = flush_write_bio(&epd);
 	} else {
-		ret = -EUCLEAN;
+		ret = -EROFS;
 		end_write_bio(&epd, ret);
 	}
 	return ret;
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index a7b043fd7a572..498b824148187 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -3717,7 +3717,7 @@ static noinline_for_stack int scrub_supers(struct scrub_ctx *sctx,
 	struct btrfs_fs_info *fs_info = sctx->fs_info;
 
 	if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state))
-		return -EIO;
+		return -EROFS;
 
 	/* Seed devices of a new filesystem has their own generation. */
 	if (scrub_dev->fs_devices != fs_info->fs_devices)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 54589e940f9af..465ddb297c381 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -873,7 +873,10 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 	if (trans->aborted ||
 	    test_bit(BTRFS_FS_STATE_ERROR, &info->fs_state)) {
 		wake_up_process(info->transaction_kthread);
-		err = -EIO;
+		if (TRANS_ABORTED(trans))
+			err = trans->aborted;
+		else
+			err = -EROFS;
 	}
 
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
-- 
2.25.1

[PATCH 5.4 020/107] btrfs: add wrapper for transaction abort predicate

[Greg Kroah-Hartman]

From: David Sterba <dsterba@suse.com>

[ Upstream commit bf31f87f71cc7a89871ab0a451c047a0c0144bf1 ]

The status of aborted transaction can change between calls and it needs
to be accessed by READ_ONCE. Add a helper that also wraps the unlikely
hint.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/block-group.c   |  2 +-
 fs/btrfs/delayed-inode.c |  2 +-
 fs/btrfs/extent-tree.c   | 10 +++++-----
 fs/btrfs/super.c         |  2 +-
 fs/btrfs/transaction.c   | 25 +++++++++++++------------
 fs/btrfs/transaction.h   | 12 ++++++++++++
 6 files changed, 33 insertions(+), 20 deletions(-)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 42d69e77f89d9..b167649f5f5de 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -2168,7 +2168,7 @@ static int cache_save_setup(struct btrfs_block_group_cache *block_group,
 		return 0;
 	}
 
-	if (trans->aborted)
+	if (TRANS_ABORTED(trans))
 		return 0;
 again:
 	inode = lookup_free_space_inode(block_group, path);
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 5bcccfbcc7c15..a34ee9c2f3151 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1151,7 +1151,7 @@ static int __btrfs_run_delayed_items(struct btrfs_trans_handle *trans, int nr)
 	int ret = 0;
 	bool count = (nr > 0);
 
-	if (trans->aborted)
+	if (TRANS_ABORTED(trans))
 		return -EIO;
 
 	path = btrfs_alloc_path();
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 739332b462059..a36bd4507bacd 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1561,7 +1561,7 @@ static int run_delayed_extent_op(struct btrfs_trans_handle *trans,
 	int err = 0;
 	int metadata = !extent_op->is_data;
 
-	if (trans->aborted)
+	if (TRANS_ABORTED(trans))
 		return 0;
 
 	if (metadata && !btrfs_fs_incompat(fs_info, SKINNY_METADATA))
@@ -1681,7 +1681,7 @@ static int run_one_delayed_ref(struct btrfs_trans_handle *trans,
 {
 	int ret = 0;
 
-	if (trans->aborted) {
+	if (TRANS_ABORTED(trans)) {
 		if (insert_reserved)
 			btrfs_pin_extent(trans->fs_info, node->bytenr,
 					 node->num_bytes, 1);
@@ -2169,7 +2169,7 @@ int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
 	int run_all = count == (unsigned long)-1;
 
 	/* We'll clean this up in btrfs_cleanup_transaction */
-	if (trans->aborted)
+	if (TRANS_ABORTED(trans))
 		return 0;
 
 	if (test_bit(BTRFS_FS_CREATING_FREE_SPACE_TREE, &fs_info->flags))
@@ -2892,7 +2892,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans)
 	else
 		unpin = &fs_info->freed_extents[0];
 
-	while (!trans->aborted) {
+	while (!TRANS_ABORTED(trans)) {
 		struct extent_state *cached_state = NULL;
 
 		mutex_lock(&fs_info->unused_bg_unpin_mutex);
@@ -2924,7 +2924,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans)
 		u64 trimmed = 0;
 
 		ret = -EROFS;
-		if (!trans->aborted)
+		if (!TRANS_ABORTED(trans))
 			ret = btrfs_discard_extent(fs_info,
 						   block_group->key.objectid,
 						   block_group->key.offset,
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index e21cae80c6d58..a1498df419b4f 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -241,7 +241,7 @@ void __btrfs_abort_transaction(struct btrfs_trans_handle *trans,
 {
 	struct btrfs_fs_info *fs_info = trans->fs_info;
 
-	trans->aborted = errno;
+	WRITE_ONCE(trans->aborted, errno);
 	/* Nothing used. The other threads that have joined this
 	 * transaction may be able to continue. */
 	if (!trans->dirty && list_empty(&trans->new_bgs)) {
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 465ddb297c381..c346ee7ec18d4 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -174,7 +174,7 @@ loop:
 
 	cur_trans = fs_info->running_transaction;
 	if (cur_trans) {
-		if (cur_trans->aborted) {
+		if (TRANS_ABORTED(cur_trans)) {
 			spin_unlock(&fs_info->trans_lock);
 			return cur_trans->aborted;
 		}
@@ -390,7 +390,7 @@ static inline int is_transaction_blocked(struct btrfs_transaction *trans)
 {
 	return (trans->state >= TRANS_STATE_BLOCKED &&
 		trans->state < TRANS_STATE_UNBLOCKED &&
-		!trans->aborted);
+		!TRANS_ABORTED(trans));
 }
 
 /* wait for commit against the current transaction to become unblocked
@@ -409,7 +409,7 @@ static void wait_current_trans(struct btrfs_fs_info *fs_info)
 
 		wait_event(fs_info->transaction_wait,
 			   cur_trans->state >= TRANS_STATE_UNBLOCKED ||
-			   cur_trans->aborted);
+			   TRANS_ABORTED(cur_trans));
 		btrfs_put_transaction(cur_trans);
 	} else {
 		spin_unlock(&fs_info->trans_lock);
@@ -870,7 +870,7 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans,
 	if (throttle)
 		btrfs_run_delayed_iputs(info);
 
-	if (trans->aborted ||
+	if (TRANS_ABORTED(trans) ||
 	    test_bit(BTRFS_FS_STATE_ERROR, &info->fs_state)) {
 		wake_up_process(info->transaction_kthread);
 		if (TRANS_ABORTED(trans))
@@ -1730,7 +1730,8 @@ static void wait_current_trans_commit_start(struct btrfs_fs_info *fs_info,
 					    struct btrfs_transaction *trans)
 {
 	wait_event(fs_info->transaction_blocked_wait,
-		   trans->state >= TRANS_STATE_COMMIT_START || trans->aborted);
+		   trans->state >= TRANS_STATE_COMMIT_START ||
+		   TRANS_ABORTED(trans));
 }
 
 /*
@@ -1742,7 +1743,8 @@ static void wait_current_trans_commit_start_and_unblock(
 					struct btrfs_transaction *trans)
 {
 	wait_event(fs_info->transaction_wait,
-		   trans->state >= TRANS_STATE_UNBLOCKED || trans->aborted);
+		   trans->state >= TRANS_STATE_UNBLOCKED ||
+		   TRANS_ABORTED(trans));
 }
 
 /*
@@ -1960,7 +1962,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 	trans->dirty = true;
 
 	/* Stop the commit early if ->aborted is set */
-	if (unlikely(READ_ONCE(cur_trans->aborted))) {
+	if (TRANS_ABORTED(cur_trans)) {
 		ret = cur_trans->aborted;
 		btrfs_end_transaction(trans);
 		return ret;
@@ -2034,7 +2036,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 
 		wait_for_commit(cur_trans);
 
-		if (unlikely(cur_trans->aborted))
+		if (TRANS_ABORTED(cur_trans))
 			ret = cur_trans->aborted;
 
 		btrfs_put_transaction(cur_trans);
@@ -2053,7 +2055,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 			spin_unlock(&fs_info->trans_lock);
 
 			wait_for_commit(prev_trans);
-			ret = prev_trans->aborted;
+			ret = READ_ONCE(prev_trans->aborted);
 
 			btrfs_put_transaction(prev_trans);
 			if (ret)
@@ -2107,8 +2109,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 	wait_event(cur_trans->writer_wait,
 		   atomic_read(&cur_trans->num_writers) == 1);
 
-	/* ->aborted might be set after the previous check, so check it */
-	if (unlikely(READ_ONCE(cur_trans->aborted))) {
+	if (TRANS_ABORTED(cur_trans)) {
 		ret = cur_trans->aborted;
 		goto scrub_continue;
 	}
@@ -2226,7 +2227,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans)
 	 * The tasks which save the space cache and inode cache may also
 	 * update ->aborted, check it.
 	 */
-	if (unlikely(READ_ONCE(cur_trans->aborted))) {
+	if (TRANS_ABORTED(cur_trans)) {
 		ret = cur_trans->aborted;
 		mutex_unlock(&fs_info->tree_log_mutex);
 		mutex_unlock(&fs_info->reloc_mutex);
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index b15c31d231488..7291a2a930751 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -116,6 +116,10 @@ struct btrfs_trans_handle {
 	struct btrfs_block_rsv *orig_rsv;
 	refcount_t use_count;
 	unsigned int type;
+	/*
+	 * Error code of transaction abort, set outside of locks and must use
+	 * the READ_ONCE/WRITE_ONCE access
+	 */
 	short aborted;
 	bool adding_csums;
 	bool allocating_chunk;
@@ -127,6 +131,14 @@ struct btrfs_trans_handle {
 	struct list_head new_bgs;
 };
 
+/*
+ * The abort status can be changed between calls and is not protected by locks.
+ * This accepts btrfs_transaction and btrfs_trans_handle as types. Once it's
+ * set to a non-zero value it does not change, so the macro should be in checks
+ * but is not necessary for further reads of the value.
+ */
+#define TRANS_ABORTED(trans)		(unlikely(READ_ONCE((trans)->aborted)))
+
 struct btrfs_pending_snapshot {
 	struct dentry *dentry;
 	struct inode *dir;
-- 
2.25.1

[PATCH 5.4 021/107] ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book

[Greg Kroah-Hartman]

From: Mike Pozulp <pozulp.kernel@gmail.com>

commit f70fff83cda63bbf596f99edc131b9daaba07458 upstream.

The Flex Book uses the same ALC298 codec as other Samsung laptops which
have the no headphone sound bug, like my Samsung Notebook. The Flex Book
owner used Early Patching to confirm that this quirk fixes the bug.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200814045346.645367-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7666,6 +7666,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),
 	SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+	SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
 	SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),

[PATCH 5.4 022/107] ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion

[Greg Kroah-Hartman]

From: Mike Pozulp <pozulp.kernel@gmail.com>

commit e17f02d0559c174cf1f6435e45134490111eaa37 upstream.

The Galaxy Book Ion uses the same ALC298 codec as other Samsung laptops
which have the no headphone sound bug, like my Samsung Notebook. The
Galaxy Book owner confirmed that this patch fixes the bug.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200818165446.499821-1-pozulp.kernel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7667,6 +7667,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+	SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
 	SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),

[PATCH 5.4 023/107] can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in j1939_tp_txtimer()

[Greg Kroah-Hartman]

From: Oleksij Rempel <o.rempel@pengutronix.de>

commit cd3b3636c99fcac52c598b64061f3fe4413c6a12 upstream.

The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.

If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).

Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.

This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.

Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/can/j1939/transport.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -787,6 +787,18 @@ static int j1939_session_tx_dat(struct j
 		if (len > 7)
 			len = 7;
 
+		if (offset + len > se_skb->len) {
+			netdev_err_once(priv->ndev,
+					"%s: 0x%p: requested data outside of queued buffer: offset %i, len %i, pkt.tx: %i\n",
+					__func__, session, skcb->offset, se_skb->len , session->pkt.tx);
+			return -EOVERFLOW;
+		}
+
+		if (!len) {
+			ret = -ENOBUFS;
+			break;
+		}
+
 		memcpy(&dat[1], &tpdat[offset], len);
 		ret = j1939_tp_tx_dat(session, dat, len + 1);
 		if (ret < 0) {
@@ -1120,6 +1132,9 @@ static enum hrtimer_restart j1939_tp_txt
 		 * cleanup including propagation of the error to user space.
 		 */
 		break;
+	case -EOVERFLOW:
+		j1939_session_cancel(session, J1939_XTP_ABORT_ECTS_TOO_BIG);
+		break;
 	case 0:
 		session->tx_retry = 0;
 		break;

[PATCH 5.4 024/107] can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocated

[Greg Kroah-Hartman]

From: Oleksij Rempel <o.rempel@pengutronix.de>

commit af804b7826350d5af728dca4715e473338fbd7e5 upstream.

This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.

The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.

Bail out if no ml_priv is allocated.

Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/can/j1939/socket.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c
@@ -466,6 +466,14 @@ static int j1939_sk_bind(struct socket *
 			goto out_release_sock;
 		}
 
+		if (!ndev->ml_priv) {
+			netdev_warn_once(ndev,
+					 "No CAN mid layer private allocated, please fix your driver and use alloc_candev()!\n");
+			dev_put(ndev);
+			ret = -ENODEV;
+			goto out_release_sock;
+		}
+
 		priv = j1939_netdev_start(ndev);
 		dev_put(ndev);
 		if (IS_ERR(priv)) {

[PATCH 5.4 025/107] spi: Prevent adding devices below an unregistering controller

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit ddf75be47ca748f8b12d28ac64d624354fddf189 upstream.

CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch.  CONFIG_SPI_SLAVE allows the
same via sysfs.

But there are no precautions to prevent adding a device below a
controller that's being removed.  Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down.  E.g. it is then impossible to quiesce
the device's interrupt.

of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().

Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.

Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.19+
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/Kconfig |    3 +++
 drivers/spi/spi.c   |   21 ++++++++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -944,4 +944,7 @@ config SPI_SLAVE_SYSTEM_CONTROL
 
 endif # SPI_SLAVE
 
+config SPI_DYNAMIC
+	def_bool ACPI || OF_DYNAMIC || SPI_SLAVE
+
 endif # SPI
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -475,6 +475,12 @@ static LIST_HEAD(spi_controller_list);
  */
 static DEFINE_MUTEX(board_lock);
 
+/*
+ * Prevents addition of devices with same chip select and
+ * addition of devices below an unregistering controller.
+ */
+static DEFINE_MUTEX(spi_add_lock);
+
 /**
  * spi_alloc_device - Allocate a new SPI device
  * @ctlr: Controller to which device is connected
@@ -553,7 +559,6 @@ static int spi_dev_check(struct device *
  */
 int spi_add_device(struct spi_device *spi)
 {
-	static DEFINE_MUTEX(spi_add_lock);
 	struct spi_controller *ctlr = spi->controller;
 	struct device *dev = ctlr->dev.parent;
 	int status;
@@ -581,6 +586,13 @@ int spi_add_device(struct spi_device *sp
 		goto done;
 	}
 
+	/* Controller may unregister concurrently */
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
+	    !device_is_registered(&ctlr->dev)) {
+		status = -ENODEV;
+		goto done;
+	}
+
 	/* Descriptors take precedence */
 	if (ctlr->cs_gpiods)
 		spi->cs_gpiod = ctlr->cs_gpiods[spi->chip_select];
@@ -2582,6 +2594,10 @@ void spi_unregister_controller(struct sp
 	struct spi_controller *found;
 	int id = ctlr->bus_num;
 
+	/* Prevent addition of new devices, unregister existing ones */
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+		mutex_lock(&spi_add_lock);
+
 	device_for_each_child(&ctlr->dev, NULL, __unregister);
 
 	/* First make sure that this controller was ever added */
@@ -2602,6 +2618,9 @@ void spi_unregister_controller(struct sp
 	if (found == ctlr)
 		idr_remove(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
+
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+		mutex_unlock(&spi_add_lock);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_controller);
 

[PATCH 5.4 026/107] romfs: fix uninitialized memory leak in romfs_dev_read()

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit bcf85fcedfdd17911982a3e3564fcfec7b01eebd upstream.

romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device.  It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes.  This e.g.  means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.

Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.

Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/romfs/storage.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/romfs/storage.c
+++ b/fs/romfs/storage.c
@@ -217,10 +217,8 @@ int romfs_dev_read(struct super_block *s
 	size_t limit;
 
 	limit = romfs_maxsize(sb);
-	if (pos >= limit)
+	if (pos >= limit || buflen > limit - pos)
 		return -EIO;
-	if (buflen > limit - pos)
-		buflen = limit - pos;
 
 #ifdef CONFIG_ROMFS_ON_MTD
 	if (sb->s_mtd)

[PATCH 5.4 027/107] kernel/relay.c: fix memleak on destroy relay channel

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 71e843295c680898959b22dc877ae3839cc22470 upstream.

kmemleak report memory leak as follows:

  unreferenced object 0x607ee4e5f948 (size 8):
  comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s)
  hex dump (first 8 bytes):
  00 00 00 00 00 00 00 00 ........
  backtrace:
     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel.  Fix it by adding free_percpu() before
return from relay_destroy_channel().

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/relay.c |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -197,6 +197,7 @@ free_buf:
 static void relay_destroy_channel(struct kref *kref)
 {
 	struct rchan *chan = container_of(kref, struct rchan, kref);
+	free_percpu(chan->buf);
 	kfree(chan);
 }
 

[PATCH 5.4 028/107] uprobes: __replace_page() avoid BUG in munlock_vma_page()

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

commit c17c3dc9d08b9aad9a55a1e53f205187972f448e upstream.

syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page().  Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).

Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/uprobes.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -211,7 +211,7 @@ static int __replace_page(struct vm_area
 		try_to_free_swap(old_page);
 	page_vma_mapped_walk_done(&pvmw);
 
-	if (vma->vm_flags & VM_LOCKED)
+	if ((vma->vm_flags & VM_LOCKED) && !PageCompound(old_page))
 		munlock_vma_page(old_page);
 	put_page(old_page);
 

[PATCH 5.4 029/107] mm: include CMA pages in lowmem_reserve at boot

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

commit e08d3fdfe2dafa0331843f70ce1ff6c1c4900bf4 upstream.

The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones.  Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall.  This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order.  With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.

In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout

  cma: Reserved 256 MiB at 0x0000000030000000
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone.  This would allow
userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.

Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7867,7 +7867,7 @@ int __meminit init_per_zone_wmark_min(vo
 
 	return 0;
 }
-core_initcall(init_per_zone_wmark_min)
+postcore_initcall(init_per_zone_wmark_min)
 
 /*
  * min_free_kbytes_sysctl_handler - just a wrapper around proc_dointvec() so

[PATCH 5.4 030/107] mm, page_alloc: fix core hung in free_pcppages_bulk()

[Greg Kroah-Hartman]

From: Charan Teja Reddy <charante@codeaurora.org>

commit 88e8ac11d2ea3acc003cf01bb5a38c8aa76c3cfd upstream.

The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.

P1						P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

					Allocate the pages from the
					movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
					This process is entered into
					the exit path thus it tries
					to release the order-0 pages
					to pcp lists through
					free_unref_page_commit().
					As pcp->high = 0, pcp->count = 1
					proceed to call the function
					free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
					Read the pcp's batch value using
					READ_ONCE() and pass the same to
					free_pcppages_bulk(), pcp values
					passed here are, batch = 63,
					count = 1.

					Since num of pages in the pcp
					lists are less than ->batch,
					then it will stuck in
					while(list_empty(list)) loop
					with interrupts disabled thus
					a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.

The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1256,6 +1256,11 @@ static void free_pcppages_bulk(struct zo
 	struct page *page, *tmp;
 	LIST_HEAD(head);
 
+	/*
+	 * Ensure proper count is passed which otherwise would stuck in the
+	 * below while (list_empty(list)) loop.
+	 */
+	count = min(pcp->count, count);
 	while (count) {
 		struct list_head *list;
 

[PATCH 5.4 031/107] RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request

[Greg Kroah-Hartman]

From: Kaike Wan <kaike.wan@intel.com>

commit b25e8e85e75a61af1ddc88c4798387dd3132dd43 upstream.

The following message occurs when running an AI application with TID RDMA
enabled:

hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084

The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.

When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.

If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.

Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request.  There is
also risk of a write-after-write memory corruption due to the issue.

Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.

Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/tid_rdma.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/hw/hfi1/tid_rdma.c
+++ b/drivers/infiniband/hw/hfi1/tid_rdma.c
@@ -3215,6 +3215,7 @@ bool hfi1_tid_rdma_wqe_interlock(struct
 	case IB_WR_ATOMIC_CMP_AND_SWP:
 	case IB_WR_ATOMIC_FETCH_AND_ADD:
 	case IB_WR_RDMA_WRITE:
+	case IB_WR_RDMA_WRITE_WITH_IMM:
 		switch (prev->wr.opcode) {
 		case IB_WR_TID_RDMA_WRITE:
 			req = wqe_to_tid_req(prev);

[PATCH 5.4 032/107] ext4: fix checking of directory entry validity for inline directories

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 7303cb5bfe845f7d43cd9b2dbd37dbb266efda9b upstream.

ext4_search_dir() and ext4_generic_delete_entry() can be called both for
standard director blocks and for inline directories stored inside inode
or inline xattr space. For the second case we didn't call
ext4_check_dir_entry() with proper constraints that could result in
accepting corrupted directory entry as well as false positive filesystem
errors like:

EXT4-fs error (device dm-0): ext4_search_dir:1395: inode #28320400:
block 113246792: comm dockerd: bad entry in directory: directory entry too
close to block end - offset=0, inode=28320403, rec_len=32, name_len=8,
size=4096

Fix the arguments passed to ext4_check_dir_entry().

Fixes: 109ba779d6cc ("ext4: check for directory entries too close to block end")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200731162135.8080-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/namei.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1392,8 +1392,8 @@ int ext4_search_dir(struct buffer_head *
 		    ext4_match(dir, fname, de)) {
 			/* found a match - just to be sure, do
 			 * a full check */
-			if (ext4_check_dir_entry(dir, NULL, de, bh, bh->b_data,
-						 bh->b_size, offset))
+			if (ext4_check_dir_entry(dir, NULL, de, bh, search_buf,
+						 buf_size, offset))
 				return -1;
 			*res_dir = de;
 			return 1;
@@ -2462,7 +2462,7 @@ int ext4_generic_delete_entry(handle_t *
 	de = (struct ext4_dir_entry_2 *)entry_buf;
 	while (i < buf_size - csum_size) {
 		if (ext4_check_dir_entry(dir, NULL, de, bh,
-					 bh->b_data, bh->b_size, i))
+					 entry_buf, buf_size, i))
 			return -EFSCORRUPTED;
 		if (de == de_del)  {
 			if (pde)

[PATCH 5.4 033/107] jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()

[Greg Kroah-Hartman]

From: zhangyi (F) <yi.zhang@huawei.com>

commit ef3f5830b859604eda8723c26d90ab23edc027a4 upstream.

jbd2_write_superblock() is under the buffer lock of journal superblock
before ending that superblock write, so add a missing unlock_buffer() in
in the error path before submitting buffer.

Fixes: 742b06b5628f ("jbd2: check superblock mapped prior to committing")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200620061948.2049579-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd2/journal.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1348,8 +1348,10 @@ static int jbd2_write_superblock(journal
 	int ret;
 
 	/* Buffer got discarded which means block device got invalidated */
-	if (!buffer_mapped(bh))
+	if (!buffer_mapped(bh)) {
+		unlock_buffer(bh);
 		return -EIO;
+	}
 
 	trace_jbd2_write_superblock(journal, write_flags);
 	if (!(journal->j_flags & JBD2_BARRIER))

[PATCH 5.4 034/107] scsi: zfcp: Fix use-after-free in request timeout handlers

[Greg Kroah-Hartman]

From: Steffen Maier <maier@linux.ibm.com>

commit 2d9a2c5f581be3991ba67fa9e7497c711220ea8e upstream.

Before v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use
timer_setup()"), we intentionally only passed zfcp_adapter as context
argument to zfcp_fsf_request_timeout_handler(). Since we only trigger
adapter recovery, it was unnecessary to sync against races between timeout
and (late) completion.  Likewise, we only passed zfcp_erp_action as context
argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action,
it was unnecessary to sync against races between timeout and (late)
completion.

Meanwhile the timeout handlers get timer_list as context argument and do a
timer-specific container-of to zfcp_fsf_req which can have been freed.

Fix it by making sure that any request timeout handlers, that might just
have started before del_timer(), are completed by using del_timer_sync()
instead. This ensures the request free happens afterwards.

Space time diagram of potential use-after-free:

Basic idea is to have 2 or more pending requests whose timeouts run out at
almost the same time.

req 1 timeout     ERP thread        req 2 timeout
----------------  ----------------  ---------------------------------------
zfcp_fsf_request_timeout_handler
fsf_req = from_timer(fsf_req, t, timer)
adapter = fsf_req->adapter
zfcp_qdio_siosl(adapter)
zfcp_erp_adapter_reopen(adapter,...)
                  zfcp_erp_strategy
                  ...
                  zfcp_fsf_req_dismiss_all
                  list_for_each_entry_safe
                    zfcp_fsf_req_complete 1
                    del_timer 1
                    zfcp_fsf_req_free 1
                    zfcp_fsf_req_complete 2
                                    zfcp_fsf_request_timeout_handler
                    del_timer 2
                                    fsf_req = from_timer(fsf_req, t, timer)
                    zfcp_fsf_req_free 2
                                    adapter = fsf_req->adapter
                                              ^^^^^^^ already freed

Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com
Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/scsi/zfcp_fsf.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -409,7 +409,7 @@ static void zfcp_fsf_req_complete(struct
 		return;
 	}
 
-	del_timer(&req->timer);
+	del_timer_sync(&req->timer);
 	zfcp_fsf_protstatus_eval(req);
 	zfcp_fsf_fsfstatus_eval(req);
 	req->handler(req);
@@ -762,7 +762,7 @@ static int zfcp_fsf_req_send(struct zfcp
 	req->qdio_req.qdio_outb_usage = atomic_read(&qdio->req_q_free);
 	req->issued = get_tod_clock();
 	if (zfcp_qdio_send(qdio, &req->qdio_req)) {
-		del_timer(&req->timer);
+		del_timer_sync(&req->timer);
 		/* lookup request again, list might have changed */
 		zfcp_reqlist_find_rm(adapter->req_list, req_id);
 		zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1");

[PATCH 5.4 035/107] mm/memory.c: skip spurious TLB flush for retried page fault

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit b7333b58f358f38d90d78e00c1ee5dec82df10ad upstream.

Recently we found regression when running will_it_scale/page_fault3 test
on ARM64.  Over 70% down for the multi processes cases and over 20% down
for the multi threads cases.  It turns out the regression is caused by
commit 89b15332af7c ("mm: drop mmap_sem before calling
balance_dirty_pages() in write fault").

The test mmaps a memory size file then write to the mapping, this would
make all memory dirty and trigger dirty pages throttle, that upstream
commit would release mmap_sem then retry the page fault.  The retried
page fault would see correct PTEs installed then just fall through to
spurious TLB flush.  The regression is caused by the excessive spurious
TLB flush.  It is fine on x86 since x86's spurious TLB flush is no-op.

We could just skip the spurious TLB flush to mitigate the regression.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Xu Yu <xuyu@linux.alibaba.com>
Debugged-by: Xu Yu <xuyu@linux.alibaba.com>
Tested-by: Xu Yu <xuyu@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3886,6 +3886,9 @@ static vm_fault_t handle_pte_fault(struc
 				vmf->flags & FAULT_FLAG_WRITE)) {
 		update_mmu_cache(vmf->vma, vmf->address, vmf->pte);
 	} else {
+		/* Skip spurious TLB flush for retried page fault */
+		if (vmf->flags & FAULT_FLAG_TRIED)
+			goto unlock;
 		/*
 		 * This is needed only for protection faults but the arch code
 		 * is not yet telling us if this is a protection fault or not.

[PATCH 5.4 036/107] drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal

[Greg Kroah-Hartman]

From: Daniel Kolesa <daniel@octaforge.org>

commit f41ed88cbd6f025f7a683a11a74f901555fba11c upstream.

GFP_KERNEL may and will sleep, and this is being executed in
a non-preemptible context; this will mess things up since it's
called inbetween DC_FP_START/END, and rescheduling will result
in the DC_FP_END later being called in a different context (or
just crashing if any floating point/vector registers/instructions
are used after the call is resumed in a different context).

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2845,7 +2845,7 @@ static bool dcn20_validate_bandwidth_int
 	int vlevel = 0;
 	int pipe_split_from[MAX_PIPES];
 	int pipe_cnt = 0;
-	display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_KERNEL);
+	display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_ATOMIC);
 	DC_LOGGER_INIT(dc->ctx->logger);
 
 	BW_VAL_TRACE_COUNT();

[PATCH 5.4 037/107] drm/amd/display: Fix EDID parsing after resume from suspend

[Greg Kroah-Hartman]

From: Stylon Wang <stylon.wang@amd.com>

commit b24bdc37d03a0478189e20a50286092840f414fa upstream.

[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.

[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.

Cc: stable@vger.kernel.org
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1434,6 +1434,7 @@ amdgpu_dm_update_connector_after_detect(
 
 			drm_connector_update_edid_property(connector,
 							   aconnector->edid);
+			drm_add_edid_modes(connector, aconnector->edid);
 
 			if (aconnector->dc_link->aux_mode)
 				drm_dp_cec_set_edid(&aconnector->dm_dp_aux.aux,

[PATCH 5.4 038/107] drm/amd/display: fix pow() crashing when given base 0

[Greg Kroah-Hartman]

From: Krunoslav Kovac <Krunoslav.Kovac@amd.com>

commit d2e59d0ff4c44d1f6f8ed884a5bea7d1bb7fd98c upstream.

[Why&How]
pow(a,x) is implemented as exp(x*log(a)). log(0) will crash.
So return 0^x = 0, unless x=0, convention seems to be 0^0 = 1.

Cc: stable@vger.kernel.org
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/display/include/fixed31_32.h |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/amd/display/include/fixed31_32.h
+++ b/drivers/gpu/drm/amd/display/include/fixed31_32.h
@@ -431,6 +431,9 @@ struct fixed31_32 dc_fixpt_log(struct fi
  */
 static inline struct fixed31_32 dc_fixpt_pow(struct fixed31_32 arg1, struct fixed31_32 arg2)
 {
+	if (arg1.value == 0)
+		return arg2.value == 0 ? dc_fixpt_one : dc_fixpt_zero;
+
 	return dc_fixpt_exp(
 		dc_fixpt_mul(
 			dc_fixpt_log(arg1),

[PATCH 5.4 039/107] kthread: Do not preempt current task if it is going to call schedule()

[Greg Kroah-Hartman]

From: Liang Chen <cl@rock-chips.com>

commit 26c7295be0c5e6da3fa45970e9748be983175b1b upstream.

when we create a kthread with ktrhead_create_on_cpu(),the child thread
entry is ktread.c:ktrhead() which will be preempted by the parent after
call complete(done) while schedule() is not called yet,then the parent
will call wait_task_inactive(child) but the child is still on the runqueue,
so the parent will schedule_hrtimeout() for 1 jiffy,it will waste a lot of
time,especially on startup.

  parent                             child
ktrhead_create_on_cpu()
  wait_fo_completion(&done) -----> ktread.c:ktrhead()
                             |----- complete(done);--wakeup and preempted by parent
 kthread_bind() <------------|  |-> schedule();--dequeue here
  wait_task_inactive(child)     |
   schedule_hrtimeout(1 jiffy) -|

So we hope the child just wakeup parent but not preempted by parent, and the
child is going to call schedule() soon,then the parent will not call
schedule_hrtimeout(1 jiffy) as the child is already dequeue.

The same issue for ktrhead_park()&&kthread_parkme().
This patch can save 120ms on rk312x startup with CONFIG_HZ=300.

Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200306070133.18335-2-cl@rock-chips.com
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/kthread.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -199,8 +199,15 @@ static void __kthread_parkme(struct kthr
 		if (!test_bit(KTHREAD_SHOULD_PARK, &self->flags))
 			break;
 
+		/*
+		 * Thread is going to call schedule(), do not preempt it,
+		 * or the caller of kthread_park() may spend more time in
+		 * wait_task_inactive().
+		 */
+		preempt_disable();
 		complete(&self->parked);
-		schedule();
+		schedule_preempt_disabled();
+		preempt_enable();
 	}
 	__set_current_state(TASK_RUNNING);
 }
@@ -245,8 +252,14 @@ static int kthread(void *_create)
 	/* OK, tell user we're spawned, wait for stop or wakeup */
 	__set_current_state(TASK_UNINTERRUPTIBLE);
 	create->result = current;
+	/*
+	 * Thread is going to call schedule(), do not preempt it,
+	 * or the creator may spend more time in wait_task_inactive().
+	 */
+	preempt_disable();
 	complete(done);
-	schedule();
+	schedule_preempt_disabled();
+	preempt_enable();
 
 	ret = -EINTR;
 	if (!test_bit(KTHREAD_SHOULD_STOP, &self->flags)) {

[PATCH 5.4 040/107] opp: Enable resources again if they were disabled earlier

[Greg Kroah-Hartman]

From: Rajendra Nayak <rnayak@codeaurora.org>

[ Upstream commit a4501bac0e553bed117b7e1b166d49731caf7260 ]

dev_pm_opp_set_rate() can now be called with freq = 0 in order
to either drop performance or bandwidth votes or to disable
regulators on platforms which support them.

In such cases, a subsequent call to dev_pm_opp_set_rate() with
the same frequency ends up returning early because 'old_freq == freq'

Instead make it fall through and put back the dropped performance
and bandwidth votes and/or enable back the regulators.

Cc: v5.3+ <stable@vger.kernel.org> # v5.3+
Fixes: cd7ea582866f ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes")
Reported-by: Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Don't skip clk_set_rate() and massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/opp/core.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 9ff0538ee83a0..7b057c32e11b1 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -843,10 +843,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Return early if nothing to do */
 	if (old_freq == freq) {
-		dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
-			__func__, freq);
-		ret = 0;
-		goto put_opp_table;
+		if (!opp_table->required_opp_tables && !opp_table->regulators) {
+			dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n",
+				__func__, freq);
+			ret = 0;
+			goto put_opp_table;
+		}
 	}
 
 	temp_freq = old_freq;
-- 
2.25.1

[PATCH 5.4 041/107] scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

[Greg Kroah-Hartman]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit c0a18ee0ce78d7957ec1a53be35b1b3beba80668 ]

It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a
delay before VCC is powered off. Sdd Micron vendor ID and this quirk for
Micron devices.

Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs_quirks.h | 1 +
 drivers/scsi/ufs/ufshcd.c     | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index fe6cad9b2a0d2..03985919150b9 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -12,6 +12,7 @@
 #define UFS_ANY_VENDOR 0xFFFF
 #define UFS_ANY_MODEL  "ANY_MODEL"
 
+#define UFS_VENDOR_MICRON      0x12C
 #define UFS_VENDOR_TOSHIBA     0x198
 #define UFS_VENDOR_SAMSUNG     0x1CE
 #define UFS_VENDOR_SKHYNIX     0x1AD
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2b6853c7375c9..b41b88bcab3d9 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -217,6 +217,8 @@ ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state,
 
 static struct ufs_dev_fix ufs_fixups[] = {
 	/* UFS cards deviations table */
+	UFS_FIX(UFS_VENDOR_MICRON, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
-- 
2.25.1

[PATCH 5.4 042/107] scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

[Greg Kroah-Hartman]

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 3145550a7f8b08356c8ff29feaa6c56aca12901d ]

This patch fixes the following crash (see
https://bugzilla.kernel.org/show_bug.cgi?id=208045)

 Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a)
 CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic
        #202004230533
 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019
 pstate: 80400005 (Nzcv daif +PAN -UAO)
 pc : flush_dcache_page+0x18/0x40
 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user]
 sp : ffff000015123a80
 x29: ffff000015123a80 x28: 0000000000000000
 x27: 0000000000001000 x26: ffff000023ea5000
 x25: ffffcfa25bbe08b8 x24: 0000000000000078
 x23: ffff7e0000000000 x22: ffff000023ea5001
 x21: ffffcfa24b79c000 x20: 0000000000000fff
 x19: ffff7e00008fa940 x18: 0000000000000000
 x17: 0000000000000000 x16: ffff2d047e709138
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: ffff2d047fbd0a40
 x11: 0000000000000000 x10: 0000000000000030
 x9 : 0000000000000000 x8 : ffffc9a254820a00
 x7 : 00000000000013b0 x6 : 000000000000003f
 x5 : 0000000000000040 x4 : ffffcfa25bbe08e8
 x3 : 0000000000001000 x2 : 0000000000000078
 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18
 Call trace:
  flush_dcache_page+0x18/0x40
  is_ring_space_avail+0x68/0x2f8 [target_core_user]
  queue_cmd_ring+0x1f8/0x680 [target_core_user]
  tcmu_queue_cmd+0xe4/0x158 [target_core_user]
  __target_execute_cmd+0x30/0xf0 [target_core_mod]
  target_execute_cmd+0x294/0x390 [target_core_mod]
  transport_generic_new_cmd+0x1e8/0x358 [target_core_mod]
  transport_handle_cdb_direct+0x50/0xb0 [target_core_mod]
  iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod]
  iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod]
  iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod]
  iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod]
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260)
 ---[ end trace 1e451c73f4266776 ]---

The solution is based on patch:

  "scsi: target: tcmu: Optimize use of flush_dcache_page"

which restricts the use of tcmu_flush_dcache_range() to addresses from
vmalloc'ed areas only.

This patch now replaces the virt_to_page() call in
tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by
vmalloc_to_page().

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

Link: https://lore.kernel.org/r/20200618131632.32748-3-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index a497e7c1f4fcc..d766fb14942b3 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -601,7 +601,7 @@ static inline void tcmu_flush_dcache_range(void *vaddr, size_t size)
 	size = round_up(size+offset, PAGE_SIZE);
 
 	while (size) {
-		flush_dcache_page(virt_to_page(start));
+		flush_dcache_page(vmalloc_to_page(start));
 		start += PAGE_SIZE;
 		size -= PAGE_SIZE;
 	}
-- 
2.25.1

[PATCH 5.4 043/107] media: budget-core: Improve exception handling in budget_register()

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit fc0456458df8b3421dba2a5508cd817fbc20ea71 ]

budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/ttpci/budget-core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/ttpci/budget-core.c b/drivers/media/pci/ttpci/budget-core.c
index fadbdeeb44955..293867b9e7961 100644
--- a/drivers/media/pci/ttpci/budget-core.c
+++ b/drivers/media/pci/ttpci/budget-core.c
@@ -369,20 +369,25 @@ static int budget_register(struct budget *budget)
 	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend);
 
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	budget->mem_frontend.source = DMX_MEMORY_FE;
 	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend);
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend);
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
 
 	return 0;
+
+err_release_dmx:
+	dvb_dmxdev_release(&budget->dmxdev);
+	dvb_dmx_release(&budget->demux);
+	return ret;
 }
 
 static void budget_unregister(struct budget *budget)
-- 
2.25.1

[PATCH 5.4 044/107] rtc: goldfish: Enable interrupt in set_alarm() when necessary

[Greg Kroah-Hartman]

From: Huacai Chen <chenhc@lemote.com>

[ Upstream commit 22f8d5a1bf230cf8567a4121fc3789babb46336d ]

When use goldfish rtc, the "hwclock" command fails with "select() to
/dev/rtc to wait for clock tick timed out". This is because "hwclock"
need the set_alarm() hook to enable interrupt when alrm->enabled is
true. This operation is missing in goldfish rtc (but other rtc drivers,
such as cmos rtc, enable interrupt here), so add it.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1592654683-31314-1-git-send-email-chenhc@lemote.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-goldfish.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-goldfish.c b/drivers/rtc/rtc-goldfish.c
index 1a3420ee6a4d9..d5083b013fbce 100644
--- a/drivers/rtc/rtc-goldfish.c
+++ b/drivers/rtc/rtc-goldfish.c
@@ -73,6 +73,7 @@ static int goldfish_rtc_set_alarm(struct device *dev,
 		rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
 		writel((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
 		writel(rtc_alarm64, base + TIMER_ALARM_LOW);
+		writel(1, base + TIMER_IRQ_ENABLED);
 	} else {
 		/*
 		 * if this function was called with enabled=0
-- 
2.25.1

[PATCH 5.4 045/107] media: vpss: clean up resources in init

[Greg Kroah-Hartman]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 9c487b0b0ea7ff22127fe99a7f67657d8730ff94 ]

If platform_driver_register() fails within vpss_init() resources are not
cleaned up. The patch fixes this issue by introducing the corresponding
error handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpss.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c
index d38d2bbb6f0f8..7000f0bf0b353 100644
--- a/drivers/media/platform/davinci/vpss.c
+++ b/drivers/media/platform/davinci/vpss.c
@@ -505,19 +505,31 @@ static void vpss_exit(void)
 
 static int __init vpss_init(void)
 {
+	int ret;
+
 	if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control"))
 		return -EBUSY;
 
 	oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4);
 	if (unlikely(!oper_cfg.vpss_regs_base2)) {
-		release_mem_region(VPSS_CLK_CTRL, 4);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
 	writel(VPSS_CLK_CTRL_VENCCLKEN |
-		     VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
+	       VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
+
+	ret = platform_driver_register(&vpss_driver);
+	if (ret)
+		goto err_pd_register;
+
+	return 0;
 
-	return platform_driver_register(&vpss_driver);
+err_pd_register:
+	iounmap(oper_cfg.vpss_regs_base2);
+err_ioremap:
+	release_mem_region(VPSS_CLK_CTRL, 4);
+	return ret;
 }
 subsys_initcall(vpss_init);
 module_exit(vpss_exit);
-- 
2.25.1

[PATCH 5.4 046/107] Input: psmouse - add a newline when printing proto by sysfs

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ]

When I cat parameter 'proto' by sysfs, it displays as follows. It's
better to add a newline for easy reading.

root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/psmouse-base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 527ae0b9a191e..0b4a3039f312f 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -2042,7 +2042,7 @@ static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp)
 {
 	int type = *((unsigned int *)kp->arg);
 
-	return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name);
+	return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name);
 }
 
 static int __init psmouse_init(void)
-- 
2.25.1

[PATCH 5.4 047/107] MIPS: Fix unable to reserve memory for Crash kernel

[Greg Kroah-Hartman]

From: Jinyang He <hejinyang@loongson.cn>

[ Upstream commit b1ce9716f3b5ed3b49badf1f003b9e34b7ead0f9 ]

Use 0 as the align parameter in memblock_find_in_range() is
incorrect when we reserve memory for Crash kernel.

The environment as follows:
[    0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e
...
[    1.951016]     crashkernel=64M@128M

The warning as follows:
[    0.000000] Invalid memory region reserved for crash kernel

And the iomem as follows:
00200000-0effffff : System RAM
  04000000-0484009f : Kernel code
  048400a0-04ad7fff : Kernel data
  04b40000-05c4c6bf : Kernel bss
1a000000-1bffffff : pci@1a000000
...

The align parameter may be finally used by round_down() or round_up().
Like the following call tree:

mips-next: mm/memblock.c

memblock_find_in_range
└── memblock_find_in_range_node
    ├── __memblock_find_range_bottom_up
    │   └── round_up
    └── __memblock_find_range_top_down
        └── round_down
\#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
\#define round_down(x, y) ((x) & ~__round_mask(x, y))
\#define __round_mask(x, y) ((__typeof__(x))((y)-1))

The round_down(or round_up)'s second parameter must be a power of 2.
If the second parameter is 0, it both will return 0.

Use 1 as the parameter to fix the bug and the iomem as follows:
00200000-0effffff : System RAM
  04000000-0484009f : Kernel code
  048400a0-04ad7fff : Kernel data
  04b40000-05c4c6bf : Kernel bss
  08000000-0bffffff : Crash kernel
1a000000-1bffffff : pci@1a000000
...

Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7b06e6ee6817d..b8884de89c81e 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -494,7 +494,7 @@ static void __init mips_parse_crashkernel(void)
 	if (ret != 0 || crash_size <= 0)
 		return;
 
-	if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 0)) {
+	if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 1)) {
 		pr_warn("Invalid memory region reserved for crash kernel\n");
 		return;
 	}
-- 
2.25.1

[PATCH 5.4 048/107] m68knommu: fix overwriting of bits in ColdFire V3 cache control

[Greg Kroah-Hartman]

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ]

The Cache Control Register (CACR) of the ColdFire V3 has bits that
control high level caching functions, and also enable/disable the use
of the alternate stack pointer register (the EUSP bit) to provide
separate supervisor and user stack pointer registers. The code as
it is today will blindly clear the EUSP bit on cache actions like
invalidation. So it is broken for this case - and that will result
in failed booting (interrupt entry and exit processing will be
completely hosed).

This only affects ColdFire V3 parts that support the alternate stack
register (like the 5329 for example) - generally speaking new parts do,
older parts don't. It has no impact on ColdFire V3 parts with the single
stack pointer, like the 5307 for example.

Fix the cache bit defines used, so they maintain the EUSP bit when
carrying out cache actions through the CACR register.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/m53xxacr.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/include/asm/m53xxacr.h b/arch/m68k/include/asm/m53xxacr.h
index 9138a624c5c81..692f90e7fecc1 100644
--- a/arch/m68k/include/asm/m53xxacr.h
+++ b/arch/m68k/include/asm/m53xxacr.h
@@ -89,9 +89,9 @@
  * coherency though in all cases. And for copyback caches we will need
  * to push cached data as well.
  */
-#define CACHE_INIT	  CACR_CINVA
-#define CACHE_INVALIDATE  CACR_CINVA
-#define CACHE_INVALIDATED CACR_CINVA
+#define CACHE_INIT        (CACHE_MODE + CACR_CINVA - CACR_EC)
+#define CACHE_INVALIDATE  (CACHE_MODE + CACR_CINVA)
+#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINVA)
 
 #define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
 			 (0x000f0000) + \
-- 
2.25.1

[PATCH 5.4 049/107] svcrdma: Fix another Receive buffer leak

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 64d26422516b2e347b32e6d9b1d40b3c19a62aae ]

During a connection tear down, the Receive queue is flushed before
the device resources are freed. Typically, all the Receives flush
with IB_WR_FLUSH_ERR.

However, any pending successful Receives flush with IB_WR_SUCCESS,
and the server automatically posts a fresh Receive to replace the
completing one. This happens even after the connection has closed
and the RQ is drained. Receives that are posted after the RQ is
drained appear never to complete, causing a Receive resource leak.
The leaked Receive buffer is left DMA-mapped.

To prevent these late-posted recv_ctxt's from leaking, block new
Receive posting after XPT_CLOSE is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 0ce4e75b29812..d803d814a03ad 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -265,6 +265,8 @@ static int svc_rdma_post_recv(struct svcxprt_rdma *rdma)
 {
 	struct svc_rdma_recv_ctxt *ctxt;
 
+	if (test_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags))
+		return 0;
 	ctxt = svc_rdma_recv_ctxt_get(rdma);
 	if (!ctxt)
 		return -ENOMEM;
-- 
2.25.1

[PATCH 5.4 050/107] xfs: fix inode quota reservation checks

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit f959b5d037e71a4d69b5bf71faffa065d9269b4a ]

xfs_trans_dqresv is the function that we use to make reservations
against resource quotas.  Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.

For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.

Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.

Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_trans_dquot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c
index 16457465833ba..904780dd74aa3 100644
--- a/fs/xfs/xfs_trans_dquot.c
+++ b/fs/xfs/xfs_trans_dquot.c
@@ -646,7 +646,7 @@ xfs_trans_dqresv(
 			}
 		}
 		if (ninos > 0) {
-			total_count = be64_to_cpu(dqp->q_core.d_icount) + ninos;
+			total_count = dqp->q_res_icount + ninos;
 			timer = be32_to_cpu(dqp->q_core.d_itimer);
 			warns = be16_to_cpu(dqp->q_core.d_iwarns);
 			warnlimit = dqp->q_mount->m_quotainfo->qi_iwarnlimit;
-- 
2.25.1

[PATCH 5.4 051/107] drm/ttm: fix offset in VMAs with a pg_offs in ttm_bo_vm_access

[Greg Kroah-Hartman]

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit c0001213d195d1bac83e0744c06ff06dd5a8ba53 ]

VMAs with a pg_offs that's offset from the start of the vma_node need
to adjust the offset within the BO accordingly. This matches the
offset calculation in ttm_bo_vm_fault_reserved.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/381169/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo_vm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 46dc3de7e81bf..f2bad14ac04ab 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -358,8 +358,10 @@ static int ttm_bo_vm_access_kmap(struct ttm_buffer_object *bo,
 static int ttm_bo_vm_access(struct vm_area_struct *vma, unsigned long addr,
 			    void *buf, int len, int write)
 {
-	unsigned long offset = (addr) - vma->vm_start;
 	struct ttm_buffer_object *bo = vma->vm_private_data;
+	unsigned long offset = (addr) - vma->vm_start +
+		((vma->vm_pgoff - drm_vma_node_start(&bo->base.vma_node))
+		 << PAGE_SHIFT);
 	int ret;
 
 	if (len < 1 || (offset + len) >> PAGE_SHIFT > bo->num_pages)
-- 
2.25.1

[PATCH 5.4 052/107] jffs2: fix UAF problem

[Greg Kroah-Hartman]

From: Zhe Li <lizhe67@huawei.com>

[ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ]

The log of UAF problem is listed below.
BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc
Read of size 4 by task rm/8283
=============================================================================
BUG kmalloc-32 (Tainted: P    B      O   ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0
        0xb0bba6ef
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        __slab_alloc.isra.21.constprop.25+0x2c/0x44
        __kmalloc+0x1dc/0x370
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        jffs2_do_unlink+0x328/0x5fc [jffs2]
        jffs2_rmdir+0x110/0x1cc [jffs2]
        vfs_rmdir+0x180/0x268
        do_rmdir+0x2cc/0x300
        ret_from_syscall+0x0/0x3c
INFO: Freed in 0x205b age=3054364 cpu=0 pid=0
        0x2e9173
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2]
        jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2]
        jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2]
        jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2]
        kthread+0x1a8/0x1b0
        ret_from_kernel_thread+0x5c/0x64
Call Trace:
[c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable)
[c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2]
[c17dddd0] [c026da04] vfs_rmdir+0x180/0x268
[c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300
[c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c

The root cause is that we don't get "jffs2_inode_info.sem" before
we scan list "jffs2_inode_info.dents" in function jffs2_rmdir.
This patch add codes to get "jffs2_inode_info.sem" before we scan
"jffs2_inode_info.dents" to slove the UAF problem.

Signed-off-by: Zhe Li <lizhe67@huawei.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/dir.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index f20cff1194bb6..776493713153f 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -590,10 +590,14 @@ static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
 	int ret;
 	uint32_t now = JFFS2_NOW();
 
+	mutex_lock(&f->sem);
 	for (fd = f->dents ; fd; fd = fd->next) {
-		if (fd->ino)
+		if (fd->ino) {
+			mutex_unlock(&f->sem);
 			return -ENOTEMPTY;
+		}
 	}
+	mutex_unlock(&f->sem);
 
 	ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
 			      dentry->d_name.len, f, now);
-- 
2.25.1

[PATCH 5.4 053/107] ceph: fix use-after-free for fsc->mdsc

[Greg Kroah-Hartman]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit a7caa88f8b72c136f9a401f498471b8a8e35370d ]

If the ceph_mdsc_init() fails, it will free the mdsc already.

Reported-by: syzbot+b57f46d8d6ea51960b8c@syzkaller.appspotmail.com
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/mds_client.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 701bc3f4d4ba1..b0077f5a31688 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -4143,7 +4143,6 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 		return -ENOMEM;
 	}
 
-	fsc->mdsc = mdsc;
 	init_completion(&mdsc->safe_umount_waiters);
 	init_waitqueue_head(&mdsc->session_close_wq);
 	INIT_LIST_HEAD(&mdsc->waiting_for_map);
@@ -4195,6 +4194,8 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 
 	strscpy(mdsc->nodename, utsname()->nodename,
 		sizeof(mdsc->nodename));
+
+	fsc->mdsc = mdsc;
 	return 0;
 }
 
-- 
2.25.1

[PATCH 5.4 054/107] swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses

[Greg Kroah-Hartman]

From: Boris Ostrovsky <boris.ostrovsky@oracle.com>

[ Upstream commit 8b1e868f66076490189a36d984fcce286cdd6295 ]

xen_alloc_coherent_pages might return pages for which virt_to_phys and
virt_to_page don't work, e.g. ioremap'ed pages.

So in xen_swiotlb_free_coherent we can't assume that virt_to_page works.
Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc
virt addresses.

This patch fixes the following crash at boot on RPi4 (the underlying
issue is not RPi4 specific):
https://marc.info/?l=xen-devel&m=158862573216800

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Link: https://lore.kernel.org/r/20200710223427.6897-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/swiotlb-xen.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index bd3a10dfac157..06346422f7432 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -335,6 +335,7 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	int order = get_order(size);
 	phys_addr_t phys;
 	u64 dma_mask = DMA_BIT_MASK(32);
+	struct page *page;
 
 	if (hwdev && hwdev->coherent_dma_mask)
 		dma_mask = hwdev->coherent_dma_mask;
@@ -346,9 +347,14 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
 	/* Convert the size to actually allocated. */
 	size = 1UL << (order + XEN_PAGE_SHIFT);
 
+	if (is_vmalloc_addr(vaddr))
+		page = vmalloc_to_page(vaddr);
+	else
+		page = virt_to_page(vaddr);
+
 	if (!WARN_ON((dev_addr + size - 1 > dma_mask) ||
 		     range_straddles_page_boundary(phys, size)) &&
-	    TestClearPageXenRemapped(virt_to_page(vaddr)))
+	    TestClearPageXenRemapped(page))
 		xen_destroy_contiguous_region(phys, order);
 
 	xen_free_coherent_pages(hwdev, size, vaddr, (dma_addr_t)phys, attrs);
-- 
2.25.1

[PATCH 5.4 055/107] cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0

[Greg Kroah-Hartman]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 4daca379c703ff55edc065e8e5173dcfeecf0148 ]

The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update
this MSR via BIOS settings on some systems or can use msr tools to update.
Also some systems boot with value = 0.

This results in display of cpufreq/cpuinfo_max_freq wrong. This value
will be equal to cpufreq/base_frequency, even though turbo is enabled.

But platform will still function normally in HWP mode as we get max
1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used
to calculate cpu->pstate.turbo_freq, which is used for to set
policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate
is used. For example to set policy->max.

To fix this, also update cpu->pstate.turbo_pstate when updating
cpu->pstate.turbo_freq.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index d3d7c4ef7d045..53dc0fd6f6d3c 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1571,6 +1571,7 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 
 		intel_pstate_get_hwp_max(cpu->cpu, &phy_max, &current_max);
 		cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling;
+		cpu->pstate.turbo_pstate = phy_max;
 	} else {
 		cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
 	}
-- 
2.25.1

[PATCH 5.4 056/107] scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

[Greg Kroah-Hartman]

From: Javed Hasan <jhasan@marvell.com>

[ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ]

In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except
for PTR_ERR. However, in some cases it didn't.

This fix is to call fc_frame_free(fp) before function returns.

Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_disc.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 2b865c6423e29..e00dc4693fcbd 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -581,8 +581,12 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
 		goto out;
-	if (IS_ERR(fp))
-		goto redisc;
+	if (IS_ERR(fp)) {
+		mutex_lock(&disc->disc_mutex);
+		fc_disc_restart(disc);
+		mutex_unlock(&disc->disc_mutex);
+		goto out;
+	}
 
 	cp = fc_frame_payload_get(fp, sizeof(*cp));
 	if (!cp)
@@ -609,7 +613,7 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 				new_rdata->disc_id = disc->disc_id;
 				fc_rport_login(new_rdata);
 			}
-			goto out;
+			goto free_fp;
 		}
 		rdata->disc_id = disc->disc_id;
 		mutex_unlock(&rdata->rp_mutex);
@@ -626,6 +630,8 @@ redisc:
 		fc_disc_restart(disc);
 		mutex_unlock(&disc->disc_mutex);
 	}
+free_fp:
+	fc_frame_free(fp);
 out:
 	kref_put(&rdata->kref, fc_rport_destroy);
 	if (!IS_ERR(fp))
-- 
2.25.1

[PATCH 5.4 057/107] virtio_ring: Avoid loop when vq is broken in virtqueue_poll

[Greg Kroah-Hartman]

From: Mao Wenan <wenan.mao@linux.alibaba.com>

[ Upstream commit 481a0d7422db26fb63e2d64f0652667a5c6d0f3e ]

The loop may exist if vq->broken is true,
virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split
will return NULL, so virtnet_poll will reschedule napi to
receive packet, it will lead cpu usage(si) to 100%.

call trace as below:
virtnet_poll
	virtnet_receive
		virtqueue_get_buf_ctx
			virtqueue_get_buf_ctx_packed
			virtqueue_get_buf_ctx_split
	virtqueue_napi_complete
		virtqueue_poll           //return true
		virtqueue_napi_schedule //it will reschedule napi

to fix this, return false if vq is broken in virtqueue_poll.

Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_ring.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 58b96baa8d488..4f7c73e6052f6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1960,6 +1960,9 @@ bool virtqueue_poll(struct virtqueue *_vq, unsigned last_used_idx)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
+	if (unlikely(vq->broken))
+		return false;
+
 	virtio_mb(vq->weak_barriers);
 	return vq->packed_ring ? virtqueue_poll_packed(_vq, last_used_idx) :
 				 virtqueue_poll_split(_vq, last_used_idx);
-- 
2.25.1

[PATCH 5.4 058/107] media: camss: fix memory leaks on error handling paths in probe

[Greg Kroah-Hartman]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit f45882cfb152f5d3a421fd58f177f227e44843b9 ]

camss_probe() does not free camss on error handling paths. The patch
introduces an additional error label for this purpose. Besides, it
removes call of v4l2_async_notifier_cleanup() from
camss_of_parse_ports() since its caller, camss_probe(), cleans up all
its resources itself.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/camss/camss.c | 30 +++++++++++++++--------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 3fdc9f964a3c6..2483641799dfb 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -504,7 +504,6 @@ static int camss_of_parse_ports(struct camss *camss)
 	return num_subdevs;
 
 err_cleanup:
-	v4l2_async_notifier_cleanup(&camss->notifier);
 	of_node_put(node);
 	return ret;
 }
@@ -835,29 +834,38 @@ static int camss_probe(struct platform_device *pdev)
 		camss->csid_num = 4;
 		camss->vfe_num = 2;
 	} else {
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_free;
 	}
 
 	camss->csiphy = devm_kcalloc(dev, camss->csiphy_num,
 				     sizeof(*camss->csiphy), GFP_KERNEL);
-	if (!camss->csiphy)
-		return -ENOMEM;
+	if (!camss->csiphy) {
+		ret = -ENOMEM;
+		goto err_free;
+	}
 
 	camss->csid = devm_kcalloc(dev, camss->csid_num, sizeof(*camss->csid),
 				   GFP_KERNEL);
-	if (!camss->csid)
-		return -ENOMEM;
+	if (!camss->csid) {
+		ret = -ENOMEM;
+		goto err_free;
+	}
 
 	camss->vfe = devm_kcalloc(dev, camss->vfe_num, sizeof(*camss->vfe),
 				  GFP_KERNEL);
-	if (!camss->vfe)
-		return -ENOMEM;
+	if (!camss->vfe) {
+		ret = -ENOMEM;
+		goto err_free;
+	}
 
 	v4l2_async_notifier_init(&camss->notifier);
 
 	num_subdevs = camss_of_parse_ports(camss);
-	if (num_subdevs < 0)
-		return num_subdevs;
+	if (num_subdevs < 0) {
+		ret = num_subdevs;
+		goto err_cleanup;
+	}
 
 	ret = camss_init_subdevices(camss);
 	if (ret < 0)
@@ -936,6 +944,8 @@ err_register_entities:
 	v4l2_device_unregister(&camss->v4l2_dev);
 err_cleanup:
 	v4l2_async_notifier_cleanup(&camss->notifier);
+err_free:
+	kfree(camss);
 
 	return ret;
 }
-- 
2.25.1

[PATCH 5.4 059/107] tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null pointer dereference

[Greg Kroah-Hartman]

From: Gaurav Singh <gaurav1086@gmail.com>

[ Upstream commit d830020656c5b68ced962ed3cb51a90e0a89d4c4 ]

Haven't reproduced this issue. This PR is does a minor code cleanup.

Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chris Down <chris@chrisdown.name>
Link: http://lkml.kernel.org/r/20200726013808.22242-1-gaurav1086@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/cgroup/cgroup_util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c
index bdb69599c4bdc..5e939ff1e3f95 100644
--- a/tools/testing/selftests/cgroup/cgroup_util.c
+++ b/tools/testing/selftests/cgroup/cgroup_util.c
@@ -105,7 +105,7 @@ int cg_read_strcmp(const char *cgroup, const char *control,
 
 	/* Handle the case of comparing against empty string */
 	if (!expected)
-		size = 32;
+		return -1;
 	else
 		size = strlen(expected) + 1;
 
-- 
2.25.1

[PATCH 5.4 060/107] xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init

[Greg Kroah-Hartman]

From: Eiichi Tsukata <devel@etsukata.com>

[ Upstream commit 96cf2a2c75567ff56195fe3126d497a2e7e4379f ]

If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN
shows the following warning:

  UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23
  member access within null pointer of type 'struct xfs_kobj'
  Call Trace:
   dump_stack+0x10e/0x195
   ubsan_type_mismatch_common+0x241/0x280
   __ubsan_handle_type_mismatch_v1+0x32/0x40
   init_xfs_fs+0x12b/0x28f
   do_one_initcall+0xdd/0x1d0
   do_initcall_level+0x151/0x1b6
   do_initcalls+0x50/0x8f
   do_basic_setup+0x29/0x2b
   kernel_init_freeable+0x19f/0x20b
   kernel_init+0x11/0x1e0
   ret_from_fork+0x22/0x30

Fix it by checking parent_kobj before the code accesses its member.

Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace edits]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_sysfs.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/xfs_sysfs.h b/fs/xfs/xfs_sysfs.h
index e9f810fc67317..43585850f1546 100644
--- a/fs/xfs/xfs_sysfs.h
+++ b/fs/xfs/xfs_sysfs.h
@@ -32,9 +32,11 @@ xfs_sysfs_init(
 	struct xfs_kobj		*parent_kobj,
 	const char		*name)
 {
+	struct kobject		*parent;
+
+	parent = parent_kobj ? &parent_kobj->kobject : NULL;
 	init_completion(&kobj->complete);
-	return kobject_init_and_add(&kobj->kobject, ktype,
-				    &parent_kobj->kobject, "%s", name);
+	return kobject_init_and_add(&kobj->kobject, ktype, parent, "%s", name);
 }
 
 static inline void
-- 
2.25.1

[PATCH 5.4 061/107] alpha: fix annotation of io{read,write}{16,32}be()

[Greg Kroah-Hartman]

From: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>

[ Upstream commit bd72866b8da499e60633ff28f8a4f6e09ca78efe ]

These accessors must be used to read/write a big-endian bus.  The value
returned or written is native-endian.

However, these accessors are defined using be{16,32}_to_cpu() or
cpu_to_be{16,32}() to make the endian conversion but these expect a
__be{16,32} when none is present.  Keeping them would need a force cast
that would solve nothing at all.

So, do the conversion using swab{16,32}, like done in asm-generic for
similar situations.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200622114232.80039-1-luc.vanoostenryck@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/asm/io.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index b771bf1b53523..103270d5a9fc6 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -502,10 +502,10 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 }
 #endif
 
-#define ioread16be(p) be16_to_cpu(ioread16(p))
-#define ioread32be(p) be32_to_cpu(ioread32(p))
-#define iowrite16be(v,p) iowrite16(cpu_to_be16(v), (p))
-#define iowrite32be(v,p) iowrite32(cpu_to_be32(v), (p))
+#define ioread16be(p) swab16(ioread16(p))
+#define ioread32be(p) swab32(ioread32(p))
+#define iowrite16be(v,p) iowrite16(swab16(v), (p))
+#define iowrite32be(v,p) iowrite32(swab32(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
-- 
2.25.1

[PATCH 5.4 062/107] fs/signalfd.c: fix inconsistent return codes for signalfd4

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

[ Upstream commit a089e3fd5a82aea20f3d9ec4caa5f4c65cc2cfcc ]

The kernel signalfd4() syscall returns different error codes when called
either in compat or native mode.  This behaviour makes correct emulation
in qemu and testing programs like LTP more complicated.

Fix the code to always return -in both modes- EFAULT for unaccessible user
memory, and EINVAL when called with an invalid signal mask.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Laurent Vivier <laurent@vivier.eu>
Link: http://lkml.kernel.org/r/20200530100707.GA10159@ls3530.fritz.box
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/signalfd.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/signalfd.c b/fs/signalfd.c
index 44b6845b071c3..5b78719be4455 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -314,9 +314,10 @@ SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask,
 {
 	sigset_t mask;
 
-	if (sizemask != sizeof(sigset_t) ||
-	    copy_from_user(&mask, user_mask, sizeof(mask)))
+	if (sizemask != sizeof(sigset_t))
 		return -EINVAL;
+	if (copy_from_user(&mask, user_mask, sizeof(mask)))
+		return -EFAULT;
 	return do_signalfd4(ufd, &mask, flags);
 }
 
@@ -325,9 +326,10 @@ SYSCALL_DEFINE3(signalfd, int, ufd, sigset_t __user *, user_mask,
 {
 	sigset_t mask;
 
-	if (sizemask != sizeof(sigset_t) ||
-	    copy_from_user(&mask, user_mask, sizeof(mask)))
+	if (sizemask != sizeof(sigset_t))
 		return -EINVAL;
+	if (copy_from_user(&mask, user_mask, sizeof(mask)))
+		return -EFAULT;
 	return do_signalfd4(ufd, &mask, 0);
 }
 
-- 
2.25.1

[PATCH 5.4 063/107] ext4: fix potential negative array index in do_split()

[Greg Kroah-Hartman]

From: Eric Sandeen <sandeen@redhat.com>

[ Upstream commit 5872331b3d91820e14716632ebb56b1399b34fe1 ]

If for any reason a directory passed to do_split() does not have enough
active entries to exceed half the size of the block, we can end up
iterating over all "count" entries without finding a split point.

In this case, count == move, and split will be zero, and we will
attempt a negative index into map[].

Guard against this by detecting this case, and falling back to
split-to-half-of-count instead; in this case we will still have
plenty of space (> half blocksize) in each split block.

Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 0218b1407abbb..36a81b57012a5 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1852,7 +1852,7 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
 			     blocksize, hinfo, map);
 	map -= count;
 	dx_sort_map(map, count);
-	/* Split the existing block in the middle, size-wise */
+	/* Ensure that neither split block is over half full */
 	size = 0;
 	move = 0;
 	for (i = count-1; i >= 0; i--) {
@@ -1862,8 +1862,18 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
 		size += map[i].size;
 		move++;
 	}
-	/* map index at which we will split */
-	split = count - move;
+	/*
+	 * map index at which we will split
+	 *
+	 * If the sum of active entries didn't exceed half the block size, just
+	 * split it in half by count; each resulting block will have at least
+	 * half the space free.
+	 */
+	if (i > 0)
+		split = count - move;
+	else
+		split = count/2;
+
 	hash2 = map[split].hash;
 	continued = hash2 == map[split - 1].hash;
 	dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n",
-- 
2.25.1

[PATCH 5.4 064/107] ext4: dont allow overlapping system zones

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

[ Upstream commit bf9a379d0980e7413d94cb18dac73db2bfc5f470 ]

Currently, add_system_zone() just silently merges two added system zones
that overlap. However the overlap should not happen and it generally
suggests that some unrelated metadata overlap which indicates the fs is
corrupted. We should have caught such problems earlier (e.g. in
ext4_check_descriptors()) but add this check as another line of defense.
In later patch we also use this for stricter checking of journal inode
extent tree.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/block_validity.c | 36 +++++++++++++-----------------------
 1 file changed, 13 insertions(+), 23 deletions(-)

diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index ff8e1205127ee..ceb54ccc937e9 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -68,7 +68,7 @@ static int add_system_zone(struct ext4_system_blocks *system_blks,
 			   ext4_fsblk_t start_blk,
 			   unsigned int count)
 {
-	struct ext4_system_zone *new_entry = NULL, *entry;
+	struct ext4_system_zone *new_entry, *entry;
 	struct rb_node **n = &system_blks->root.rb_node, *node;
 	struct rb_node *parent = NULL, *new_node = NULL;
 
@@ -79,30 +79,20 @@ static int add_system_zone(struct ext4_system_blocks *system_blks,
 			n = &(*n)->rb_left;
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = &(*n)->rb_right;
-		else {
-			if (start_blk + count > (entry->start_blk +
-						 entry->count))
-				entry->count = (start_blk + count -
-						entry->start_blk);
-			new_node = *n;
-			new_entry = rb_entry(new_node, struct ext4_system_zone,
-					     node);
-			break;
-		}
+		else	/* Unexpected overlap of system zones. */
+			return -EFSCORRUPTED;
 	}
 
-	if (!new_entry) {
-		new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
-					     GFP_KERNEL);
-		if (!new_entry)
-			return -ENOMEM;
-		new_entry->start_blk = start_blk;
-		new_entry->count = count;
-		new_node = &new_entry->node;
-
-		rb_link_node(new_node, parent, n);
-		rb_insert_color(new_node, &system_blks->root);
-	}
+	new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
+				     GFP_KERNEL);
+	if (!new_entry)
+		return -ENOMEM;
+	new_entry->start_blk = start_blk;
+	new_entry->count = count;
+	new_node = &new_entry->node;
+
+	rb_link_node(new_node, parent, n);
+	rb_insert_color(new_node, &system_blks->root);
 
 	/* Can we merge to the left? */
 	node = rb_prev(new_node);
-- 
2.25.1

[PATCH 5.4 065/107] netfilter: nf_tables: nft_exthdr: the presence return value should be little-endian

[Greg Kroah-Hartman]

From: Stephen Suryaputra <ssuryaextr@gmail.com>

[ Upstream commit b428336676dbca363262cc134b6218205df4f530 ]

On big-endian machine, the returned register data when the exthdr is
present is not being compared correctly because little-endian is
assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval()
and nft_cmp_fast_init(), calls cpu_to_le32().

The following dump also shows that little endian is assumed:

$ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter
ip
  [ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ]
  [ cmp eq reg 1 0x01000000 ]
  [ counter pkts 0 bytes 0 ]

Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when
RR option exists in the packet shows that the comparison fails because
the assumption:

nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0
nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000

v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the
    warnings reported by kernel test robot.

Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_exthdr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index a5e8469859e39..427d77b111b17 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -44,7 +44,7 @@ static void nft_exthdr_ipv6_eval(const struct nft_expr *expr,
 
 	err = ipv6_find_hdr(pkt->skb, &offset, priv->type, NULL, NULL);
 	if (priv->flags & NFT_EXTHDR_F_PRESENT) {
-		*dest = (err >= 0);
+		nft_reg_store8(dest, err >= 0);
 		return;
 	} else if (err < 0) {
 		goto err;
@@ -141,7 +141,7 @@ static void nft_exthdr_ipv4_eval(const struct nft_expr *expr,
 
 	err = ipv4_find_option(nft_net(pkt), skb, &offset, priv->type);
 	if (priv->flags & NFT_EXTHDR_F_PRESENT) {
-		*dest = (err >= 0);
+		nft_reg_store8(dest, err >= 0);
 		return;
 	} else if (err < 0) {
 		goto err;
-- 
2.25.1

[PATCH 5.4 066/107] spi: stm32: fixes suspend/resume management

[Greg Kroah-Hartman]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit db96bf976a4fc65439be0b4524c0d41427d98814 ]

This patch adds pinctrl power management, and reconfigure spi controller
in case of resume.

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-5-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index b222ce8d083ef..7e92ab0cc9920 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -14,6 +14,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
@@ -1986,6 +1987,8 @@ static int stm32_spi_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
+	pinctrl_pm_select_sleep_state(&pdev->dev);
+
 	return 0;
 }
 
@@ -1997,13 +2000,18 @@ static int stm32_spi_runtime_suspend(struct device *dev)
 
 	clk_disable_unprepare(spi->clk);
 
-	return 0;
+	return pinctrl_pm_select_sleep_state(dev);
 }
 
 static int stm32_spi_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct stm32_spi *spi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
 
 	return clk_prepare_enable(spi->clk);
 }
@@ -2033,10 +2041,23 @@ static int stm32_spi_resume(struct device *dev)
 		return ret;
 
 	ret = spi_master_resume(master);
-	if (ret)
+	if (ret) {
 		clk_disable_unprepare(spi->clk);
+		return ret;
+	}
 
-	return ret;
+	ret = pm_runtime_get_sync(dev);
+	if (ret) {
+		dev_err(dev, "Unable to power device:%d\n", ret);
+		return ret;
+	}
+
+	spi->cfg->config(spi);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
 }
 #endif
 
-- 
2.25.1

[PATCH 5.4 067/107] ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 56235e4bc5ae58cb8fcd9314dba4e9ab077ddda8 ]

Looks like the q6afe-dai dapm widget registers are set as "0",
which is a not correct.

As this registers will be read by ASoC core during startup
which will throw up errors, Fix this by making the registers
as SND_SOC_NOPM as these should be never used.

With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.

Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/qdsp6/q6afe-dai.c | 210 +++++++++++++++----------------
 1 file changed, 105 insertions(+), 105 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index 2a5302f1db98a..0168af8492727 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -1150,206 +1150,206 @@ static int q6afe_of_xlate_dai_name(struct snd_soc_component *component,
 }
 
 static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
-	SND_SOC_DAPM_AIF_IN("HDMI_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_0_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_1_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_2_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_3_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_4_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_5_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_IN("SLIMBUS_6_RX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_TX", NULL, 0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_TX", NULL, 0, 0, 0, 0),
+	SND_SOC_DAPM_AIF_IN("HDMI_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_0_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_1_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_2_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_3_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_4_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_5_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_IN("SLIMBUS_6_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_MI2S_RX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_TX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_MI2S_RX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_MI2S_TX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_MI2S_TX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX_SD1",
 			"Secondary MI2S Playback SD1",
-			0, 0, 0, 0),
+			0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRI_MI2S_RX", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRI_MI2S_TX", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_0", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_1", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_2", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_3", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_4", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_5", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_6", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_7", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_0", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_1", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_2", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_3", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_4", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_5", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_6", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_7", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_0", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_1", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_2", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_3", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_4", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_5", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_6", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_7", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_0", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_1", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_2", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_3", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_4", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_5", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_6", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_7", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_0", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_1", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_2", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_3", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_4", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_5", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_6", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_7", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_0", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_1", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_2", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_3", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_4", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_5", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_6", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_7", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_0", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_1", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_2", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_3", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_4", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_5", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_6", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_7", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_0", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_1", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_2", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_3", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_4", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_5", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_6", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_7", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_0", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_1", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_2", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_3", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_4", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_5", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_6", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_7", NULL,
-			     0, 0, 0, 0),
+			     0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_0", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_1", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_2", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_3", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_4", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_5", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_6", NULL,
-						0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_7", NULL,
-						0, 0, 0, 0),
-	SND_SOC_DAPM_AIF_OUT("DISPLAY_PORT_RX", "NULL", 0, 0, 0, 0),
+						0, SND_SOC_NOPM, 0, 0),
+	SND_SOC_DAPM_AIF_OUT("DISPLAY_PORT_RX", "NULL", 0, SND_SOC_NOPM, 0, 0),
 };
 
 static const struct snd_soc_component_driver q6afe_dai_component = {
-- 
2.25.1

[PATCH 5.4 068/107] ASoC: q6routing: add dummy register read/write function

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 796a58fe2b8c9b6668db00d92512ec84be663027 ]

Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.

With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.

To fix this add dummy read/write function to return default value.

Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/qdsp6/q6routing.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index ddcd9978cf57b..745cc9dd14f38 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -996,6 +996,20 @@ static int msm_routing_probe(struct snd_soc_component *c)
 	return 0;
 }
 
+static unsigned int q6routing_reg_read(struct snd_soc_component *component,
+				       unsigned int reg)
+{
+	/* default value */
+	return 0;
+}
+
+static int q6routing_reg_write(struct snd_soc_component *component,
+			       unsigned int reg, unsigned int val)
+{
+	/* dummy */
+	return 0;
+}
+
 static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.ops = &q6pcm_routing_ops,
 	.probe = msm_routing_probe,
@@ -1004,6 +1018,8 @@ static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.num_dapm_widgets = ARRAY_SIZE(msm_qdsp6_widgets),
 	.dapm_routes = intercon,
 	.num_dapm_routes = ARRAY_SIZE(intercon),
+	.read = q6routing_reg_read,
+	.write = q6routing_reg_write,
 };
 
 static int q6pcm_routing_probe(struct platform_device *pdev)
-- 
2.25.1

[PATCH 5.4 069/107] bpf: sock_ops sk access may stomp registers when dst_reg = src_reg

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

[ Upstream commit 84f44df664e9f0e261157e16ee1acd77cc1bb78d ]

Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the
src_reg = dst_reg when reading the sk field of a sock_ops struct we
generate xlated code,

  53: (61) r9 = *(u32 *)(r9 +28)
  54: (15) if r9 == 0x0 goto pc+3
  56: (79) r9 = *(u64 *)(r9 +0)

This stomps on the r9 reg to do the sk_fullsock check and then when
reading the skops->sk field instead of the sk pointer we get the
sk_fullsock. To fix use similar pattern noted in the previous fix
and use the temp field to save/restore a register used to do
sk_fullsock check.

After the fix the generated xlated code reads,

  52: (7b) *(u64 *)(r9 +32) = r8
  53: (61) r8 = *(u32 *)(r9 +28)
  54: (15) if r9 == 0x0 goto pc+3
  55: (79) r8 = *(u64 *)(r9 +32)
  56: (79) r9 = *(u64 *)(r9 +0)
  57: (05) goto pc+1
  58: (79) r8 = *(u64 *)(r9 +32)

Here r9 register was in-use so r8 is chosen as the temporary register.
In line 52 r8 is saved in temp variable and at line 54 restored in case
fullsock != 0. Finally we handle fullsock == 0 case by restoring at
line 58.

This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge
this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a
bit more confusing than just adding a new macro despite a bit of
duplicating code.

Fixes: 1314ef561102e ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/filter.c | 49 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 11 deletions(-)

diff --git a/net/core/filter.c b/net/core/filter.c
index bd1e46d61d8a1..5c490d473df1d 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -8010,6 +8010,43 @@ static u32 sock_ops_convert_ctx_access(enum bpf_access_type type,
 				      offsetof(OBJ, OBJ_FIELD));	      \
 	} while (0)
 
+#define SOCK_OPS_GET_SK()							      \
+	do {								      \
+		int fullsock_reg = si->dst_reg, reg = BPF_REG_9, jmp = 1;     \
+		if (si->dst_reg == reg || si->src_reg == reg)		      \
+			reg--;						      \
+		if (si->dst_reg == reg || si->src_reg == reg)		      \
+			reg--;						      \
+		if (si->dst_reg == si->src_reg) {			      \
+			*insn++ = BPF_STX_MEM(BPF_DW, si->src_reg, reg,	      \
+					  offsetof(struct bpf_sock_ops_kern,  \
+					  temp));			      \
+			fullsock_reg = reg;				      \
+			jmp += 2;					      \
+		}							      \
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(			      \
+						struct bpf_sock_ops_kern,     \
+						is_fullsock),		      \
+				      fullsock_reg, si->src_reg,	      \
+				      offsetof(struct bpf_sock_ops_kern,      \
+					       is_fullsock));		      \
+		*insn++ = BPF_JMP_IMM(BPF_JEQ, fullsock_reg, 0, jmp);	      \
+		if (si->dst_reg == si->src_reg)				      \
+			*insn++ = BPF_LDX_MEM(BPF_DW, reg, si->src_reg,	      \
+				      offsetof(struct bpf_sock_ops_kern,      \
+				      temp));				      \
+		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(			      \
+						struct bpf_sock_ops_kern, sk),\
+				      si->dst_reg, si->src_reg,		      \
+				      offsetof(struct bpf_sock_ops_kern, sk));\
+		if (si->dst_reg == si->src_reg)	{			      \
+			*insn++ = BPF_JMP_A(1);				      \
+			*insn++ = BPF_LDX_MEM(BPF_DW, reg, si->src_reg,	      \
+				      offsetof(struct bpf_sock_ops_kern,      \
+				      temp));				      \
+		}							      \
+	} while (0)
+
 #define SOCK_OPS_GET_TCP_SOCK_FIELD(FIELD) \
 		SOCK_OPS_GET_FIELD(FIELD, FIELD, struct tcp_sock)
 
@@ -8294,17 +8331,7 @@ static u32 sock_ops_convert_ctx_access(enum bpf_access_type type,
 		SOCK_OPS_GET_TCP_SOCK_FIELD(bytes_acked);
 		break;
 	case offsetof(struct bpf_sock_ops, sk):
-		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(
-						struct bpf_sock_ops_kern,
-						is_fullsock),
-				      si->dst_reg, si->src_reg,
-				      offsetof(struct bpf_sock_ops_kern,
-					       is_fullsock));
-		*insn++ = BPF_JMP_IMM(BPF_JEQ, si->dst_reg, 0, 1);
-		*insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(
-						struct bpf_sock_ops_kern, sk),
-				      si->dst_reg, si->src_reg,
-				      offsetof(struct bpf_sock_ops_kern, sk));
+		SOCK_OPS_GET_SK();
 		break;
 	}
 	return insn - insn_buf;
-- 
2.25.1

[PATCH 5.4 070/107] can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 38ba8b9241f5848a49b80fddac9ab5f4692e434e ]

syzbot found that at least 2 bytes of kernel information
were leaked during getsockname() on AF_CAN CAN_J1939 socket.

Since struct sockaddr_can has in fact two holes, simply
clear the whole area before filling it with useful data.

BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253
CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423
 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253
 instrument_copy_to_user include/linux/instrumented.h:91 [inline]
 _copy_to_user+0x18e/0x260 lib/usercopy.c:39
 copy_to_user include/linux/uaccess.h:186 [inline]
 move_addr_to_user+0x3de/0x670 net/socket.c:237
 __sys_getsockname+0x407/0x5e0 net/socket.c:1909
 __do_sys_getsockname net/socket.c:1920 [inline]
 __se_sys_getsockname+0x91/0xb0 net/socket.c:1917
 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917
 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440219
Code: Bad RIP value.
RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219
RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20
R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000

Local variable ----address@__sys_getsockname created at:
 __sys_getsockname+0x91/0x5e0 net/socket.c:1894
 __sys_getsockname+0x91/0x5e0 net/socket.c:1894

Bytes 2-3 of 24 are uninitialized
Memory access of size 24 starts at ffff8880ba2c7de8
Data copied to user address 0000000020000100

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Robin van der Gracht <robin@protonic.nl>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: linux-can@vger.kernel.org
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200813161834.4021638-1-edumazet@google.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/socket.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
index 11d566c70a944..1b7dc1a8547f3 100644
--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c
@@ -561,6 +561,11 @@ static int j1939_sk_connect(struct socket *sock, struct sockaddr *uaddr,
 static void j1939_sk_sock2sockaddr_can(struct sockaddr_can *addr,
 				       const struct j1939_sock *jsk, int peer)
 {
+	/* There are two holes (2 bytes and 3 bytes) to clear to avoid
+	 * leaking kernel information to user space.
+	 */
+	memset(addr, 0, J1939_MIN_NAMELEN);
+
 	addr->can_family = AF_CAN;
 	addr->can_ifindex = jsk->ifindex;
 	addr->can_addr.j1939.pgn = jsk->addr.pgn;
-- 
2.25.1

[PATCH 5.4 071/107] can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send not by J1939 stack

[Greg Kroah-Hartman]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit b43e3a82bc432c1caaed8950e7662c143470c54c ]

In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.

To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123

This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message

With this patch we add additional check to make sure, related skb is own
echo message.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/socket.c    | 1 +
 net/can/j1939/transport.c | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
index 1b7dc1a8547f3..bf9fd6ee88fe0 100644
--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c
@@ -398,6 +398,7 @@ static int j1939_sk_init(struct sock *sk)
 	spin_lock_init(&jsk->sk_session_queue_lock);
 	INIT_LIST_HEAD(&jsk->sk_session_queue);
 	sk->sk_destruct = j1939_sk_sock_destruct;
+	sk->sk_protocol = CAN_J1939;
 
 	return 0;
 }
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 5bfe6bf15a999..30957c9a8eb7a 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -2032,6 +2032,10 @@ void j1939_simple_recv(struct j1939_priv *priv, struct sk_buff *skb)
 	if (!skb->sk)
 		return;
 
+	if (skb->sk->sk_family != AF_CAN ||
+	    skb->sk->sk_protocol != CAN_J1939)
+		return;
+
 	j1939_session_list_lock(priv);
 	session = j1939_session_get_simple(priv, skb);
 	j1939_session_list_unlock(priv);
-- 
2.25.1

[PATCH 5.4 072/107] can: j1939: transport: add j1939_session_skb_find_by_offset() function

[Greg Kroah-Hartman]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 840835c9281215341d84966a8855f267a971e6a3 ]

Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.

After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.

Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 30957c9a8eb7a..90a2baac8a4aa 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -352,17 +352,16 @@ void j1939_session_skb_queue(struct j1939_session *session,
 	skb_queue_tail(&session->skb_queue, skb);
 }
 
-static struct sk_buff *j1939_session_skb_find(struct j1939_session *session)
+static struct
+sk_buff *j1939_session_skb_find_by_offset(struct j1939_session *session,
+					  unsigned int offset_start)
 {
 	struct j1939_priv *priv = session->priv;
+	struct j1939_sk_buff_cb *do_skcb;
 	struct sk_buff *skb = NULL;
 	struct sk_buff *do_skb;
-	struct j1939_sk_buff_cb *do_skcb;
-	unsigned int offset_start;
 	unsigned long flags;
 
-	offset_start = session->pkt.dpo * 7;
-
 	spin_lock_irqsave(&session->skb_queue.lock, flags);
 	skb_queue_walk(&session->skb_queue, do_skb) {
 		do_skcb = j1939_skb_to_cb(do_skb);
@@ -382,6 +381,14 @@ static struct sk_buff *j1939_session_skb_find(struct j1939_session *session)
 	return skb;
 }
 
+static struct sk_buff *j1939_session_skb_find(struct j1939_session *session)
+{
+	unsigned int offset_start;
+
+	offset_start = session->pkt.dpo * 7;
+	return j1939_session_skb_find_by_offset(session, offset_start);
+}
+
 /* see if we are receiver
  * returns 0 for broadcasts, although we will receive them
  */
@@ -766,7 +773,7 @@ static int j1939_session_tx_dat(struct j1939_session *session)
 	int ret = 0;
 	u8 dat[8];
 
-	se_skb = j1939_session_skb_find(session);
+	se_skb = j1939_session_skb_find_by_offset(session, session->pkt.tx * 7);
 	if (!se_skb)
 		return -ENOBUFS;
 
@@ -1765,7 +1772,8 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 			    __func__, session);
 		goto out_session_cancel;
 	}
-	se_skb = j1939_session_skb_find(session);
+
+	se_skb = j1939_session_skb_find_by_offset(session, packet * 7);
 	if (!se_skb) {
 		netdev_warn(priv->ndev, "%s: 0x%p: no skb found\n", __func__,
 			    session);
-- 
2.25.1

[PATCH 5.4 073/107] i40e: Set RX_ONLY mode for unicast promiscuous on VLAN

[Greg Kroah-Hartman]

From: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>

[ Upstream commit 4bd5e02a2ed1575c2f65bd3c557a077dd399f0e8 ]

Trusted VF with unicast promiscuous mode set, could listen to TX
traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN
configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to
I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with
VLAN to the one without VLAN.

Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support")
Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/i40e/i40e_adminq_cmd.h |  2 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c | 35 ++++++++++++++-----
 2 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 69a2daaca5c56..d7684ac2522ef 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1211,7 +1211,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes {
 #define I40E_AQC_SET_VSI_PROMISC_BROADCAST	0x04
 #define I40E_AQC_SET_VSI_DEFAULT		0x08
 #define I40E_AQC_SET_VSI_PROMISC_VLAN		0x10
-#define I40E_AQC_SET_VSI_PROMISC_TX		0x8000
+#define I40E_AQC_SET_VSI_PROMISC_RX_ONLY	0x8000
 	__le16	seid;
 #define I40E_AQC_VSI_PROM_CMD_SEID_MASK		0x3FF
 	__le16	vlan_tag;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 3160b5bbe6728..66f7deaf46ae2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1949,6 +1949,21 @@ i40e_status i40e_aq_set_phy_debug(struct i40e_hw *hw, u8 cmd_flags,
 	return status;
 }
 
+/**
+ * i40e_is_aq_api_ver_ge
+ * @aq: pointer to AdminQ info containing HW API version to compare
+ * @maj: API major value
+ * @min: API minor value
+ *
+ * Assert whether current HW API version is greater/equal than provided.
+ **/
+static bool i40e_is_aq_api_ver_ge(struct i40e_adminq_info *aq, u16 maj,
+				  u16 min)
+{
+	return (aq->api_maj_ver > maj ||
+		(aq->api_maj_ver == maj && aq->api_min_ver >= min));
+}
+
 /**
  * i40e_aq_add_vsi
  * @hw: pointer to the hw struct
@@ -2074,18 +2089,16 @@ i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw,
 
 	if (set) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
-		if (rx_only_promisc &&
-		    (((hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver >= 5)) ||
-		     (hw->aq.api_maj_ver > 1)))
-			flags |= I40E_AQC_SET_VSI_PROMISC_TX;
+		if (rx_only_promisc && i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+			flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY;
 	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
-	if (((hw->aq.api_maj_ver >= 1) && (hw->aq.api_min_ver >= 5)) ||
-	    (hw->aq.api_maj_ver > 1))
-		cmd->valid_flags |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_TX);
+	if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+		cmd->valid_flags |=
+			cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY);
 
 	cmd->seid = cpu_to_le16(seid);
 	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
@@ -2182,11 +2195,17 @@ enum i40e_status_code i40e_aq_set_vsi_uc_promisc_on_vlan(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					  i40e_aqc_opc_set_vsi_promiscuous_modes);
 
-	if (enable)
+	if (enable) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
+		if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+			flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY;
+	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
+	if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+		cmd->valid_flags |=
+			cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY);
 	cmd->seid = cpu_to_le16(seid);
 	cmd->vlan_tag = cpu_to_le16(vid | I40E_AQC_SET_VSI_VLAN_VALID);
 
-- 
2.25.1

[PATCH 5.4 074/107] i40e: Fix crash during removing i40e driver

[Greg Kroah-Hartman]

From: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>

[ Upstream commit 5b6d4a7f20b09c47ca598760f6dafd554af8b6d5 ]

Fix the reason of crashing system by add waiting time to finish reset
recovery process before starting remove driver procedure.
Now VSI is releasing if VSI is not in reset recovery mode.
Without this fix it was possible to start remove driver if other
processing command need reset recovery procedure which resulted in
null pointer dereference. VSI used by the ethtool process has been
cleared by remove driver process.

[ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6731.508668] #PF: supervisor read access in kernel mode
[ 6731.508670] #PF: error_code(0x0000) - not-present page
[ 6731.508671] PGD 0 P4D 0
[ 6731.508674] Oops: 0000 [#1] SMP PTI
[ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017
[ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e]
[ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83
[ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246
[ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007
[ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780
[ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004
[ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000
[ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000
[ 6731.508708] FS:  00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000
[ 6731.508710] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0
[ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6731.508715] Call Trace:
[ 6731.508734]  i40e_vsi_close+0x84/0x90 [i40e]
[ 6731.508742]  i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e]
[ 6731.508749]  i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e]
[ 6731.508757]  i40e_prep_for_reset+0x59/0x130 [i40e]
[ 6731.508765]  i40e_reconfig_rss_queues+0x5a/0x120 [i40e]
[ 6731.508774]  i40e_set_channels+0xda/0x170 [i40e]
[ 6731.508778]  ethtool_set_channels+0xe9/0x150
[ 6731.508781]  dev_ethtool+0x1b94/0x2920
[ 6731.508805]  dev_ioctl+0xc2/0x590
[ 6731.508811]  sock_do_ioctl+0xae/0x150
[ 6731.508813]  sock_ioctl+0x34f/0x3c0
[ 6731.508821]  ksys_ioctl+0x98/0xb0
[ 6731.508828]  __x64_sys_ioctl+0x1a/0x20
[ 6731.508831]  do_syscall_64+0x57/0x1c0
[ 6731.508835]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 095ed81cc0ba4..b3c3911adfc2e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -15342,6 +15342,9 @@ static void i40e_remove(struct pci_dev *pdev)
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), 0);
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), 0);
 
+	while (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+		usleep_range(1000, 2000);
+
 	/* no more scheduling of any task */
 	set_bit(__I40E_SUSPENDED, pf->state);
 	set_bit(__I40E_DOWN, pf->state);
-- 
2.25.1

[PATCH 5.4 075/107] net: fec: correct the error path for regulator disable in probe

[Greg Kroah-Hartman]

From: Fugang Duan <fugang.duan@nxp.com>

[ Upstream commit c6165cf0dbb82ded90163dce3ac183fc7a913dc4 ]

Correct the error path for regulator disable.

Fixes: 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 39c112f1543c1..a0e4b12ac4ea2 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3707,11 +3707,11 @@ fec_probe(struct platform_device *pdev)
 failed_irq:
 failed_init:
 	fec_ptp_stop(pdev);
-	if (fep->reg_phy)
-		regulator_disable(fep->reg_phy);
 failed_reset:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+	if (fep->reg_phy)
+		regulator_disable(fep->reg_phy);
 failed_regulator:
 	clk_disable_unprepare(fep->clk_ahb);
 failed_clk_ahb:
-- 
2.25.1

[PATCH 5.4 076/107] bonding: show saner speed for broadcast mode

[Greg Kroah-Hartman]

From: Jarod Wilson <jarod@redhat.com>

[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ]

Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.

Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.

Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 499845c32b1bc..11c014586d466 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4246,13 +4246,23 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return ret;
 }
 
+static u32 bond_mode_bcast_speed(struct slave *slave, u32 speed)
+{
+	if (speed == 0 || speed == SPEED_UNKNOWN)
+		speed = slave->speed;
+	else
+		speed = min(speed, slave->speed);
+
+	return speed;
+}
+
 static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev,
 					   struct ethtool_link_ksettings *cmd)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	unsigned long speed = 0;
 	struct list_head *iter;
 	struct slave *slave;
+	u32 speed = 0;
 
 	cmd->base.duplex = DUPLEX_UNKNOWN;
 	cmd->base.port = PORT_OTHER;
@@ -4264,8 +4274,13 @@ static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev,
 	 */
 	bond_for_each_slave(bond, slave, iter) {
 		if (bond_slave_can_tx(slave)) {
-			if (slave->speed != SPEED_UNKNOWN)
-				speed += slave->speed;
+			if (slave->speed != SPEED_UNKNOWN) {
+				if (BOND_MODE(bond) == BOND_MODE_BROADCAST)
+					speed = bond_mode_bcast_speed(slave,
+								      speed);
+				else
+					speed += slave->speed;
+			}
 			if (cmd->base.duplex == DUPLEX_UNKNOWN &&
 			    slave->duplex != DUPLEX_UNKNOWN)
 				cmd->base.duplex = slave->duplex;
-- 
2.25.1

[PATCH 5.4 077/107] can: j1939: fix support for multipacket broadcast message

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit f4fd77fd87e9b214c26bb2ebd4f90055eaea5ade ]

Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.

So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 90a2baac8a4aa..67189b4c482c5 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1673,8 +1673,12 @@ static void j1939_xtp_rx_rts(struct j1939_priv *priv, struct sk_buff *skb,
 			return;
 		}
 		session = j1939_xtp_rx_rts_session_new(priv, skb);
-		if (!session)
+		if (!session) {
+			if (cmd == J1939_TP_CMD_BAM && j1939_sk_recv_match(priv, skcb))
+				netdev_info(priv->ndev, "%s: failed to create TP BAM session\n",
+					    __func__);
 			return;
+		}
 	} else {
 		if (j1939_xtp_rx_rts_session_active(session, skb)) {
 			j1939_session_put(session);
@@ -1852,6 +1856,13 @@ static void j1939_xtp_rx_dat(struct j1939_priv *priv, struct sk_buff *skb)
 		else
 			j1939_xtp_rx_dat_one(session, skb);
 	}
+
+	if (j1939_cb_is_broadcast(skcb)) {
+		session = j1939_session_get_by_addr(priv, &skcb->addr, false,
+						    false);
+		if (session)
+			j1939_xtp_rx_dat_one(session, skb);
+	}
 }
 
 /* j1939 main intf */
@@ -1943,7 +1954,7 @@ static void j1939_tp_cmd_recv(struct j1939_priv *priv, struct sk_buff *skb)
 		if (j1939_tp_im_transmitter(skcb))
 			j1939_xtp_rx_rts(priv, skb, true);
 
-		if (j1939_tp_im_receiver(skcb))
+		if (j1939_tp_im_receiver(skcb) || j1939_cb_is_broadcast(skcb))
 			j1939_xtp_rx_rts(priv, skb, false);
 
 		break;
@@ -2007,7 +2018,7 @@ int j1939_tp_recv(struct j1939_priv *priv, struct sk_buff *skb)
 {
 	struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb);
 
-	if (!j1939_tp_im_involved_anydir(skcb))
+	if (!j1939_tp_im_involved_anydir(skcb) && !j1939_cb_is_broadcast(skcb))
 		return 0;
 
 	switch (skcb->addr.pgn) {
-- 
2.25.1

[PATCH 5.4 078/107] can: j1939: cancel rxtimer on multipacket broadcast session complete

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit e8b17653088f28a87c81845fa41a2d295a3b458c ]

If j1939_xtp_rx_dat_one() receive last frame of multipacket broadcast message,
j1939_session_timers_cancel() should be called to cancel rxtimer.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-3-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 67189b4c482c5..d1a9adde677b0 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1811,6 +1811,7 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	}
 
 	if (final) {
+		j1939_session_timers_cancel(session);
 		j1939_session_completed(session);
 	} else if (do_cts_eoma) {
 		j1939_tp_set_rxtimeout(session, 1250);
-- 
2.25.1

[PATCH 5.4 079/107] can: j1939: abort multipacket broadcast session when timeout occurs

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 2b8b2e31555cf55ba3680fb28e2b382e168d7ea1 ]

If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.

But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.

So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index d1a9adde677b0..e3167619b196f 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1074,9 +1074,9 @@ static void __j1939_session_cancel(struct j1939_session *session,
 	lockdep_assert_held(&session->priv->active_session_list_lock);
 
 	session->err = j1939_xtp_abort_to_errno(priv, err);
+	session->state = J1939_SESSION_WAITING_ABORT;
 	/* do not send aborts on incoming broadcasts */
 	if (!j1939_cb_is_broadcast(&session->skcb)) {
-		session->state = J1939_SESSION_WAITING_ABORT;
 		j1939_xtp_tx_abort(priv, &session->skcb,
 				   !session->transmission,
 				   err, session->skcb.addr.pgn);
-- 
2.25.1

[PATCH 5.4 080/107] can: j1939: add rxtimer for multipacket broadcast session

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

[ Upstream commit 0ae18a82686f9b9965a8ce0dd81371871b306ffe ]

According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.

So this patch fix and add rxtimer for multipacket broadcast session.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index e3167619b196f..dbd215cbc53d8 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -723,10 +723,12 @@ static int j1939_session_tx_rts(struct j1939_session *session)
 		return ret;
 
 	session->last_txcmd = dat[0];
-	if (dat[0] == J1939_TP_CMD_BAM)
+	if (dat[0] == J1939_TP_CMD_BAM) {
 		j1939_tp_schedule_txtimer(session, 50);
-
-	j1939_tp_set_rxtimeout(session, 1250);
+		j1939_tp_set_rxtimeout(session, 250);
+	} else {
+		j1939_tp_set_rxtimeout(session, 1250);
+	}
 
 	netdev_dbg(session->priv->ndev, "%s: 0x%p\n", __func__, session);
 
@@ -1687,11 +1689,15 @@ static void j1939_xtp_rx_rts(struct j1939_priv *priv, struct sk_buff *skb,
 	}
 	session->last_cmd = cmd;
 
-	j1939_tp_set_rxtimeout(session, 1250);
-
-	if (cmd != J1939_TP_CMD_BAM && !session->transmission) {
-		j1939_session_txtimer_cancel(session);
-		j1939_tp_schedule_txtimer(session, 0);
+	if (cmd == J1939_TP_CMD_BAM) {
+		if (!session->transmission)
+			j1939_tp_set_rxtimeout(session, 750);
+	} else {
+		if (!session->transmission) {
+			j1939_session_txtimer_cancel(session);
+			j1939_tp_schedule_txtimer(session, 0);
+		}
+		j1939_tp_set_rxtimeout(session, 1250);
 	}
 
 	j1939_session_put(session);
@@ -1742,6 +1748,7 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	int offset;
 	int nbytes;
 	bool final = false;
+	bool remain = false;
 	bool do_cts_eoma = false;
 	int packet;
 
@@ -1804,6 +1811,8 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	    j1939_cb_is_broadcast(&session->skcb)) {
 		if (session->pkt.rx >= session->pkt.total)
 			final = true;
+		else
+			remain = true;
 	} else {
 		/* never final, an EOMA must follow */
 		if (session->pkt.rx >= session->pkt.last)
@@ -1813,6 +1822,9 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	if (final) {
 		j1939_session_timers_cancel(session);
 		j1939_session_completed(session);
+	} else if (remain) {
+		if (!session->transmission)
+			j1939_tp_set_rxtimeout(session, 750);
 	} else if (do_cts_eoma) {
 		j1939_tp_set_rxtimeout(session, 1250);
 		if (!session->transmission)
-- 
2.25.1

[PATCH 5.4 081/107] bonding: fix a potential double-unregister

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ]

When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.

If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.

Workaround this special case by checking reg_state.

Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 11c014586d466..ce829a7a92101 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2037,7 +2037,8 @@ static int bond_release_and_destroy(struct net_device *bond_dev,
 	int ret;
 
 	ret = __bond_release_one(bond_dev, slave_dev, false, true);
-	if (ret == 0 && !bond_has_slaves(bond)) {
+	if (ret == 0 && !bond_has_slaves(bond) &&
+	    bond_dev->reg_state != NETREG_UNREGISTERING) {
 		bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
 		netdev_info(bond_dev, "Destroying bond\n");
 		bond_remove_proc_entry(bond);
-- 
2.25.1

[PATCH 5.4 082/107] s390/runtime_instrumentation: fix storage key handling

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 9eaba29c7985236e16468f4e6a49cc18cf01443e ]

The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.

Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/runtime_instr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/runtime_instr.c b/arch/s390/kernel/runtime_instr.c
index 125c7f6e87150..1788a5454b6fc 100644
--- a/arch/s390/kernel/runtime_instr.c
+++ b/arch/s390/kernel/runtime_instr.c
@@ -57,7 +57,7 @@ static void init_runtime_instr_cb(struct runtime_instr_cb *cb)
 	cb->k = 1;
 	cb->ps = 1;
 	cb->pc = 1;
-	cb->key = PAGE_DEFAULT_KEY;
+	cb->key = PAGE_DEFAULT_KEY >> 4;
 	cb->v = 1;
 }
 
-- 
2.25.1

[PATCH 5.4 083/107] s390/ptrace: fix storage key handling

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit fd78c59446b8d050ecf3e0897c5a486c7de7c595 ]

The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits. Since existing user space does not
necessarily query and set the access key correctly, just ignore the
user space provided key and use the correct one.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.

Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/ptrace.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 5aa786063eb3e..c6aef2ecf2890 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -1283,7 +1283,6 @@ static bool is_ri_cb_valid(struct runtime_instr_cb *cb)
 		cb->pc == 1 &&
 		cb->qc == 0 &&
 		cb->reserved2 == 0 &&
-		cb->key == PAGE_DEFAULT_KEY &&
 		cb->reserved3 == 0 &&
 		cb->reserved4 == 0 &&
 		cb->reserved5 == 0 &&
@@ -1347,7 +1346,11 @@ static int s390_runtime_instr_set(struct task_struct *target,
 		kfree(data);
 		return -EINVAL;
 	}
-
+	/*
+	 * Override access key in any case, since user space should
+	 * not be able to set it, nor should it care about it.
+	 */
+	ri_cb.key = PAGE_DEFAULT_KEY >> 4;
 	preempt_disable();
 	if (!target->thread.ri_cb)
 		target->thread.ri_cb = data;
-- 
2.25.1

[PATCH 5.4 084/107] ASoC: msm8916-wcd-analog: fix register Interrupt offset

[Greg Kroah-Hartman]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit ff69c97ef84c9f7795adb49e9f07c9adcdd0c288 ]

For some reason interrupt set and clear register offsets are
not set correctly.
This patch corrects them!

Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200811103452.20448-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/msm8916-wcd-analog.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 84289ebeae872..337bddb7c2a49 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -19,8 +19,8 @@
 
 #define CDC_D_REVISION1			(0xf000)
 #define CDC_D_PERPH_SUBTYPE		(0xf005)
-#define CDC_D_INT_EN_SET		(0x015)
-#define CDC_D_INT_EN_CLR		(0x016)
+#define CDC_D_INT_EN_SET		(0xf015)
+#define CDC_D_INT_EN_CLR		(0xf016)
 #define MBHC_SWITCH_INT			BIT(7)
 #define MBHC_MIC_ELECTRICAL_INS_REM_DET	BIT(6)
 #define MBHC_BUTTON_PRESS_DET		BIT(5)
-- 
2.25.1

[PATCH 5.4 085/107] ASoC: intel: Fix memleak in sst_media_open

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ]

When power_up_sst() fails, stream needs to be freed
just like when try_module_get() fails. However, current
code is returning directly and ends up leaking memory.

Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/atom/sst-mfld-platform-pcm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index 8cc3cc363eb03..31f1dd6541aa1 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -331,7 +331,7 @@ static int sst_media_open(struct snd_pcm_substream *substream,
 
 	ret_val = power_up_sst(stream);
 	if (ret_val < 0)
-		return ret_val;
+		goto out_power_up;
 
 	/* Make sure, that the period size is always even */
 	snd_pcm_hw_constraint_step(substream->runtime, 0,
@@ -340,8 +340,9 @@ static int sst_media_open(struct snd_pcm_substream *substream,
 	return snd_pcm_hw_constraint_integer(runtime,
 			 SNDRV_PCM_HW_PARAM_PERIODS);
 out_ops:
-	kfree(stream);
 	mutex_unlock(&sst_lock);
+out_power_up:
+	kfree(stream);
 	return ret_val;
 }
 
-- 
2.25.1

[PATCH 5.4 086/107] vfio/type1: Add proper error unwind for vfio_iommu_replay()

[Greg Kroah-Hartman]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit aae7a75a821a793ed6b8ad502a5890fb8e8f172d ]

The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping.  The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later.  For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached.  We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer.  If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.

This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.

To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future.  The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges.  To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.

Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 71 ++++++++++++++++++++++++++++++---
 1 file changed, 66 insertions(+), 5 deletions(-)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index 6cc47af1f06d3..ca8c10aa4a4bc 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -1187,13 +1187,16 @@ static int vfio_bus_type(struct device *dev, void *data)
 static int vfio_iommu_replay(struct vfio_iommu *iommu,
 			     struct vfio_domain *domain)
 {
-	struct vfio_domain *d;
+	struct vfio_domain *d = NULL;
 	struct rb_node *n;
 	unsigned long limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
 	int ret;
 
 	/* Arbitrarily pick the first domain in the list for lookups */
-	d = list_first_entry(&iommu->domain_list, struct vfio_domain, next);
+	if (!list_empty(&iommu->domain_list))
+		d = list_first_entry(&iommu->domain_list,
+				     struct vfio_domain, next);
+
 	n = rb_first(&iommu->dma_list);
 
 	for (; n; n = rb_next(n)) {
@@ -1211,6 +1214,11 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 				phys_addr_t p;
 				dma_addr_t i;
 
+				if (WARN_ON(!d)) { /* mapped w/o a domain?! */
+					ret = -EINVAL;
+					goto unwind;
+				}
+
 				phys = iommu_iova_to_phys(d->domain, iova);
 
 				if (WARN_ON(!phys)) {
@@ -1240,7 +1248,7 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 				if (npage <= 0) {
 					WARN_ON(!npage);
 					ret = (int)npage;
-					return ret;
+					goto unwind;
 				}
 
 				phys = pfn << PAGE_SHIFT;
@@ -1249,14 +1257,67 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 
 			ret = iommu_map(domain->domain, iova, phys,
 					size, dma->prot | domain->prot);
-			if (ret)
-				return ret;
+			if (ret) {
+				if (!dma->iommu_mapped)
+					vfio_unpin_pages_remote(dma, iova,
+							phys >> PAGE_SHIFT,
+							size >> PAGE_SHIFT,
+							true);
+				goto unwind;
+			}
 
 			iova += size;
 		}
+	}
+
+	/* All dmas are now mapped, defer to second tree walk for unwind */
+	for (n = rb_first(&iommu->dma_list); n; n = rb_next(n)) {
+		struct vfio_dma *dma = rb_entry(n, struct vfio_dma, node);
+
 		dma->iommu_mapped = true;
 	}
+
 	return 0;
+
+unwind:
+	for (; n; n = rb_prev(n)) {
+		struct vfio_dma *dma = rb_entry(n, struct vfio_dma, node);
+		dma_addr_t iova;
+
+		if (dma->iommu_mapped) {
+			iommu_unmap(domain->domain, dma->iova, dma->size);
+			continue;
+		}
+
+		iova = dma->iova;
+		while (iova < dma->iova + dma->size) {
+			phys_addr_t phys, p;
+			size_t size;
+			dma_addr_t i;
+
+			phys = iommu_iova_to_phys(domain->domain, iova);
+			if (!phys) {
+				iova += PAGE_SIZE;
+				continue;
+			}
+
+			size = PAGE_SIZE;
+			p = phys + size;
+			i = iova + size;
+			while (i < dma->iova + dma->size &&
+			       p == iommu_iova_to_phys(domain->domain, i)) {
+				size += PAGE_SIZE;
+				p += PAGE_SIZE;
+				i += PAGE_SIZE;
+			}
+
+			iommu_unmap(domain->domain, iova, size);
+			vfio_unpin_pages_remote(dma, iova, phys >> PAGE_SHIFT,
+						size >> PAGE_SHIFT, true);
+		}
+	}
+
+	return ret;
 }
 
 /*
-- 
2.25.1

[PATCH 5.4 087/107] kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit 427890aff8558eb4326e723835e0eae0e6fe3102 ]

See the SDM, volume 3, section 4.4.1:

If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.

Fixes: 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization")
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-2-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 38b2df0e71096..1721a8c8eb26c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -972,7 +972,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE;
+				   X86_CR4_SMEP | X86_CR4_PKE;
 
 	if (kvm_valid_cr4(vcpu, cr4))
 		return 1;
-- 
2.25.1

[PATCH 5.4 088/107] kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode

[Greg Kroah-Hartman]

From: Jim Mattson <jmattson@google.com>

[ Upstream commit cb957adb4ea422bd758568df5b2478ea3bb34f35 ]

See the SDM, volume 3, section 4.4.1:

If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.

Fixes: b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1721a8c8eb26c..8920ee7b28811 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -972,7 +972,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_PKE;
+				   X86_CR4_SMEP;
 
 	if (kvm_valid_cr4(vcpu, cr4))
 		return 1;
-- 
2.25.1

[PATCH 5.4 089/107] Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"

[Greg Kroah-Hartman]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit dca93232b361d260413933903cd4bdbd92ebcc7f ]

FCP T10-PI and NVMe features are independent of each other. This patch
allows both features to co-exist.

This reverts commit 5da05a26b8305a625bc9d537671b981795b46dab.

Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com
Fixes: 5da05a26b830 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d7ec4083a0911..d91c95d9981ac 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2804,10 +2804,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* This may fail but that's ok */
 	pci_enable_pcie_error_reporting(pdev);
 
-	/* Turn off T10-DIF when FC-NVMe is enabled */
-	if (ql2xnvmeenable)
-		ql2xenabledif = 0;
-
 	ha = kzalloc(sizeof(struct qla_hw_data), GFP_KERNEL);
 	if (!ha) {
 		ql_log_pci(ql_log_fatal, pdev, 0x0009,
-- 
2.25.1

[PATCH 5.4 090/107] kconfig: qconf: do not limit the pop-up menu to the first row

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ]

If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:

  if (e->y() <= header()->geometry().bottom()) {

Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.

Since the origin of e->y() starts from the bottom of the header,
this check is odd.

Going forward, you can right-click anywhere in the tree to get the
pop-up menu.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/qconf.cc | 68 ++++++++++++++++++++--------------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 0f8c77f847114..3e7fbfae798c2 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -869,40 +869,40 @@ void ConfigList::focusInEvent(QFocusEvent *e)
 
 void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 {
-	if (e->y() <= header()->geometry().bottom()) {
-		if (!headerPopup) {
-			QAction *action;
-
-			headerPopup = new QMenu(this);
-			action = new QAction("Show Name", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowName(bool)));
-			  connect(parent(), SIGNAL(showNameChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showName);
-			  headerPopup->addAction(action);
-			action = new QAction("Show Range", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowRange(bool)));
-			  connect(parent(), SIGNAL(showRangeChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showRange);
-			  headerPopup->addAction(action);
-			action = new QAction("Show Data", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowData(bool)));
-			  connect(parent(), SIGNAL(showDataChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showData);
-			  headerPopup->addAction(action);
-		}
-		headerPopup->exec(e->globalPos());
-		e->accept();
-	} else
-		e->ignore();
+	if (!headerPopup) {
+		QAction *action;
+
+		headerPopup = new QMenu(this);
+		action = new QAction("Show Name", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowName(bool)));
+		connect(parent(), SIGNAL(showNameChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showName);
+		headerPopup->addAction(action);
+
+		action = new QAction("Show Range", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowRange(bool)));
+		connect(parent(), SIGNAL(showRangeChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showRange);
+		headerPopup->addAction(action);
+
+		action = new QAction("Show Data", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowData(bool)));
+		connect(parent(), SIGNAL(showDataChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showData);
+		headerPopup->addAction(action);
+	}
+
+	headerPopup->exec(e->globalPos());
+	e->accept();
 }
 
 ConfigView*ConfigView::viewList;
-- 
2.25.1

[PATCH 5.4 091/107] kconfig: qconf: fix signal connection to invalid slots

[Greg Kroah-Hartman]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ]

If you right-click in the ConfigList window, you will see the following
messages in the console:

QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect:  (sender name:   'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect:  (sender name:   'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect:  (sender name:   'config')

Right, there is no such slot in QAction. I think this is a typo of
setChecked.

Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.

Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/qconf.cc | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 3e7fbfae798c2..a94909ad9a53a 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -878,7 +878,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowName(bool)));
 		connect(parent(), SIGNAL(showNameChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showName);
 		headerPopup->addAction(action);
 
@@ -887,7 +887,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowRange(bool)));
 		connect(parent(), SIGNAL(showRangeChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showRange);
 		headerPopup->addAction(action);
 
@@ -896,7 +896,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowData(bool)));
 		connect(parent(), SIGNAL(showDataChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showData);
 		headerPopup->addAction(action);
 	}
@@ -1228,7 +1228,7 @@ QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos)
 
 	action->setCheckable(true);
 	connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
-	connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
+	connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setChecked(bool)));
 	action->setChecked(showDebug());
 	popup->addSeparator();
 	popup->addAction(action);
-- 
2.25.1

[PATCH 5.4 092/107] efi: avoid error message when booting under Xen

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 6163a985e50cb19d5bdf73f98e45b8af91a77658 ]

efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.

Fixes: 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/efifb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index 51d97ec4f58f9..e0cbf5b3d2174 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -453,7 +453,7 @@ static int efifb_probe(struct platform_device *dev)
 	info->apertures->ranges[0].base = efifb_fix.smem_start;
 	info->apertures->ranges[0].size = size_remap;
 
-	if (efi_enabled(EFI_BOOT) &&
+	if (efi_enabled(EFI_MEMMAP) &&
 	    !efi_mem_desc_lookup(efifb_fix.smem_start, &md)) {
 		if ((efifb_fix.smem_start + efifb_fix.smem_len) >
 		    (md.phys_addr + (md.num_pages << EFI_PAGE_SHIFT))) {
-- 
2.25.1

[PATCH 5.4 093/107] Fix build error when CONFIG_ACPI is not set/enabled:

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit ee87e1557c42dc9c2da11c38e11b87c311569853 ]

../arch/x86/pci/xen.c: In function ‘pci_xen_init’:
../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
  acpi_noirq_set();

Fixes: 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/pci/xen.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 91220cc258547..5c11ae66b5d8e 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -26,6 +26,7 @@
 #include <asm/xen/pci.h>
 #include <asm/xen/cpuid.h>
 #include <asm/apic.h>
+#include <asm/acpi.h>
 #include <asm/i8259.h>
 
 static int xen_pcifront_enable_irq(struct pci_dev *dev)
-- 
2.25.1

[PATCH 5.4 094/107] RDMA/bnxt_re: Do not add user qps to flushlist

[Greg Kroah-Hartman]

From: Selvin Xavier <selvin.xavier@broadcom.com>

[ Upstream commit a812f2d60a9fb7818f9c81f967180317b52545c0 ]

Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.

Add a check to avoid user qp addition to the flush list.

Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl")
Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/bnxt_re/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 27e2df44d043d..cfe5f47d9890e 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -789,7 +789,8 @@ static int bnxt_re_handle_qp_async_event(struct creq_qp_event *qp_event,
 	struct ib_event event;
 	unsigned int flags;
 
-	if (qp->qplib_qp.state == CMDQ_MODIFY_QP_NEW_STATE_ERR) {
+	if (qp->qplib_qp.state == CMDQ_MODIFY_QP_NEW_STATE_ERR &&
+	    rdma_is_kernel_res(&qp->ib_qp.res)) {
 		flags = bnxt_re_lock_cqs(qp);
 		bnxt_qplib_add_flush_qp(&qp->qplib_qp);
 		bnxt_re_unlock_cqs(qp, flags);
-- 
2.25.1

[PATCH 5.4 095/107] afs: Fix NULL deref in afs_dynroot_depopulate()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 5e0b17b026eb7c6de9baa9b0d45a51b05f05abe1 ]

If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry.  If the superblock has a dynamic root
(ie.  what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.

Fix this by skipping that bit of code if there is no root dentry.

This leads to an oops looking like:

	general protection fault, ...
	KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
	...
	RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
	...
	Call Trace:
	 afs_kill_super+0x13b/0x180 fs/afs/super.c:535
	 deactivate_locked_super+0x94/0x160 fs/super.c:335
	 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
	 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
	 do_new_mount fs/namespace.c:2875 [inline]
	 path_mount+0x1387/0x2070 fs/namespace.c:3192
	 do_mount fs/namespace.c:3205 [inline]
	 __do_sys_mount fs/namespace.c:3413 [inline]
	 __se_sys_mount fs/namespace.c:3390 [inline]
	 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

which is oopsing on this line:

	inode_lock(root->d_inode);

presumably because sb->s_root was NULL.

Fixes: 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/dynroot.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/fs/afs/dynroot.c b/fs/afs/dynroot.c
index 7503899c0a1b5..f07e53ab808e3 100644
--- a/fs/afs/dynroot.c
+++ b/fs/afs/dynroot.c
@@ -289,15 +289,17 @@ void afs_dynroot_depopulate(struct super_block *sb)
 		net->dynroot_sb = NULL;
 	mutex_unlock(&net->proc_cells_lock);
 
-	inode_lock(root->d_inode);
-
-	/* Remove all the pins for dirs created for manually added cells */
-	list_for_each_entry_safe(subdir, tmp, &root->d_subdirs, d_child) {
-		if (subdir->d_fsdata) {
-			subdir->d_fsdata = NULL;
-			dput(subdir);
+	if (root) {
+		inode_lock(root->d_inode);
+
+		/* Remove all the pins for dirs created for manually added cells */
+		list_for_each_entry_safe(subdir, tmp, &root->d_subdirs, d_child) {
+			if (subdir->d_fsdata) {
+				subdir->d_fsdata = NULL;
+				dput(subdir);
+			}
 		}
-	}
 
-	inode_unlock(root->d_inode);
+		inode_unlock(root->d_inode);
+	}
 }
-- 
2.25.1

[PATCH 5.4 096/107] ARM64: vdso32: Install vdso32 from vdso_install

[Greg Kroah-Hartman]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 8d75785a814241587802655cc33e384230744f0c ]

Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.

Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Makefile               | 1 +
 arch/arm64/kernel/vdso32/Makefile | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index d65aef47ece3b..11a7d6208087f 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -146,6 +146,7 @@ zinstall install:
 PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 76b327f88fbb1..40dffe60b8454 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -190,7 +190,7 @@ quiet_cmd_vdsosym = VDSOSYM $@
       cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
 
 # Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
+quiet_cmd_vdso_install = INSTALL32 $@
       cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
 
 vdso.so: $(obj)/vdso.so.dbg
-- 
2.25.1

[PATCH 5.4 097/107] bonding: fix active-backup failover for current ARP slave

[Greg Kroah-Hartman]

From: Jiri Wiesner <jwiesner@suse.com>

[ Upstream commit 0410d07190961ac526f05085765a8d04d926545b ]

When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
   is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
   slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.

I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.

Fixes: b2220cad583c9 ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index ce829a7a92101..0d7a173f8e61c 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2778,6 +2778,9 @@ static int bond_ab_arp_inspect(struct bonding *bond)
 			if (bond_time_in_interval(bond, last_rx, 1)) {
 				bond_propose_link_state(slave, BOND_LINK_UP);
 				commit++;
+			} else if (slave->link == BOND_LINK_BACK) {
+				bond_propose_link_state(slave, BOND_LINK_FAIL);
+				commit++;
 			}
 			continue;
 		}
@@ -2886,6 +2889,19 @@ static void bond_ab_arp_commit(struct bonding *bond)
 
 			continue;
 
+		case BOND_LINK_FAIL:
+			bond_set_slave_link_state(slave, BOND_LINK_FAIL,
+						  BOND_SLAVE_NOTIFY_NOW);
+			bond_set_slave_inactive_flags(slave,
+						      BOND_SLAVE_NOTIFY_NOW);
+
+			/* A slave has just been enslaved and has become
+			 * the current active slave.
+			 */
+			if (rtnl_dereference(bond->curr_active_slave))
+				RCU_INIT_POINTER(bond->current_arp_slave, NULL);
+			continue;
+
 		default:
 			slave_err(bond->dev, slave->dev,
 				  "impossible: link_new_state %d on slave\n",
@@ -2936,8 +2952,6 @@ static bool bond_ab_arp_probe(struct bonding *bond)
 			return should_notify_rtnl;
 	}
 
-	bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER);
-
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		if (!found && !before && bond_slave_is_up(slave))
 			before = slave;
-- 
2.25.1

[PATCH 5.4 098/107] net: ena: Prevent reset after device destruction

[Greg Kroah-Hartman]

From: Shay Agroskin <shayagr@amazon.com>

[ Upstream commit 63d4a4c145cca2e84dc6e62d2ef5cb990c9723c2 ]

The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.

This creates the following bug:
    The driver is suspended and the ena_suspend() function is called
	-> This function calls ena_destroy_device() to free the net device
	   resources
	    -> The driver waits for the timer routine to finish
	    its execution and then cancels it, thus preventing from it
	    to be called again.

    If, in its final execution, the timer routine schedules a reset,
    the reset routine might be called afterwards,and a redundant call to
    ena_restore_device() would be made.

By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.

The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.

Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 26325f7b3c1fa..4d0d13d5d0998 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2835,16 +2835,14 @@ static void ena_fw_reset_device(struct work_struct *work)
 {
 	struct ena_adapter *adapter =
 		container_of(work, struct ena_adapter, reset_task);
-	struct pci_dev *pdev = adapter->pdev;
 
-	if (unlikely(!test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags))) {
-		dev_err(&pdev->dev,
-			"device reset schedule while reset bit is off\n");
-		return;
-	}
 	rtnl_lock();
-	ena_destroy_device(adapter, false);
-	ena_restore_device(adapter);
+
+	if (likely(test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags))) {
+		ena_destroy_device(adapter, false);
+		ena_restore_device(adapter);
+	}
+
 	rtnl_unlock();
 }
 
@@ -3675,8 +3673,11 @@ static void __ena_shutoff(struct pci_dev *pdev, bool shutdown)
 		netdev->rx_cpu_rmap = NULL;
 	}
 #endif /* CONFIG_RFS_ACCEL */
-	del_timer_sync(&adapter->timer_service);
 
+	/* Make sure timer and reset routine won't be called after
+	 * freeing device resources.
+	 */
+	del_timer_sync(&adapter->timer_service);
 	cancel_work_sync(&adapter->reset_task);
 
 	rtnl_lock(); /* lock released inside the below if-else block */
-- 
2.25.1

[PATCH 5.4 099/107] net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit cf96d977381d4a23957bade2ddf1c420b74a26b6 ]

Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.

Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cortina/gemini.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 01ae113f122a0..28d4c54505f9a 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -2388,7 +2388,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 
 	dev_info(dev, "probe %s ID %d\n", dev_name(dev), id);
 
-	netdev = alloc_etherdev_mq(sizeof(*port), TX_QUEUE_NUM);
+	netdev = devm_alloc_etherdev_mqs(dev, sizeof(*port), TX_QUEUE_NUM, TX_QUEUE_NUM);
 	if (!netdev) {
 		dev_err(dev, "Can't allocate ethernet device #%d\n", id);
 		return -ENOMEM;
@@ -2520,7 +2520,6 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	}
 
 	port->netdev = NULL;
-	free_netdev(netdev);
 	return ret;
 }
 
@@ -2529,7 +2528,6 @@ static int gemini_ethernet_port_remove(struct platform_device *pdev)
 	struct gemini_ethernet_port *port = platform_get_drvdata(pdev);
 
 	gemini_port_remove(port);
-	free_netdev(port->netdev);
 	return 0;
 }
 
-- 
2.25.1

[PATCH 5.4 100/107] hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

[Greg Kroah-Hartman]

From: Haiyang Zhang <haiyangz@microsoft.com>

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ]

netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.

Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.

Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/netvsc_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 24bb721a12bc0..42eb7a7ecd96b 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -501,7 +501,7 @@ static int netvsc_vf_xmit(struct net_device *net, struct net_device *vf_netdev,
 	int rc;
 
 	skb->dev = vf_netdev;
-	skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
+	skb_record_rx_queue(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping);
 
 	rc = dev_queue_xmit(skb);
 	if (likely(rc == NET_XMIT_SUCCESS || rc == NET_XMIT_CN)) {
-- 
2.25.1

[PATCH 5.4 101/107] net: dsa: b53: check for timeout

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ]

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/b53/b53_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 14850b7fe6d7f..4bd66ba72c03c 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1523,6 +1523,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 		return ret;
 
 	switch (ret) {
+	case -ETIMEDOUT:
+		return ret;
 	case -ENOSPC:
 		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
 			addr, vid);
-- 
2.25.1

[PATCH 5.4 102/107] powerpc/pseries: Do not initiate shutdown when system is running on UPS

[Greg Kroah-Hartman]

From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>

commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream.

As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.

In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":

  SYSTEM_SHUTDOWN 3

  The system must be shut down. An EPOW-aware OS logs the EPOW error
  log information, then schedules the system to be shut down to begin
  after an OS defined delay internal (default is 10 minutes.)

Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":

  For EPOW sensor value = 3
  0x01 = Normal system shutdown with no additional delay
  0x02 = Loss of utility power, system is running on UPS/Battery
  0x03 = Loss of system critical functions, system should be shutdown
  0x04 = Ambient temperature too high
  All other values = reserved

We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.

Commit 79872e35469b ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.

Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/pseries/ras.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -184,7 +184,6 @@ static void handle_system_shutdown(char
 	case EPOW_SHUTDOWN_ON_UPS:
 		pr_emerg("Loss of system power detected. System is running on"
 			 " UPS/battery. Check RTAS error log for details\n");
-		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS:

[PATCH 5.4 103/107] efi: add missed destroy_workqueue when efisubsys_init fails

[Greg Kroah-Hartman]

From: Li Heng <liheng40@huawei.com>

commit 98086df8b70c06234a8f4290c46064e44dafa0ed upstream.

destroy_workqueue() should be called to destroy efi_rts_wq
when efisubsys_init() init resources fails.

Cc: <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/efi/efi.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -345,6 +345,7 @@ static int __init efisubsys_init(void)
 	efi_kobj = kobject_create_and_add("efi", firmware_kobj);
 	if (!efi_kobj) {
 		pr_err("efi: Firmware registration failed.\n");
+		destroy_workqueue(efi_rts_wq);
 		return -ENOMEM;
 	}
 
@@ -381,6 +382,7 @@ err_unregister:
 	generic_ops_unregister();
 err_put:
 	kobject_put(efi_kobj);
+	destroy_workqueue(efi_rts_wq);
 	return error;
 }
 

[PATCH 5.4 104/107] epoll: Keep a reference on files added to the check list

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 upstream.

When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.

However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/eventpoll.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1991,9 +1991,11 @@ static int ep_loop_check_proc(void *priv
 			 * not already there, and calling reverse_path_check()
 			 * during ep_insert().
 			 */
-			if (list_empty(&epi->ffd.file->f_tfile_llink))
+			if (list_empty(&epi->ffd.file->f_tfile_llink)) {
+				get_file(epi->ffd.file);
 				list_add(&epi->ffd.file->f_tfile_llink,
 					 &tfile_check_list);
+			}
 		}
 	}
 	mutex_unlock(&ep->mtx);
@@ -2037,6 +2039,7 @@ static void clear_tfile_check_list(void)
 		file = list_first_entry(&tfile_check_list, struct file,
 					f_tfile_llink);
 		list_del_init(&file->f_tfile_llink);
+		fput(file);
 	}
 	INIT_LIST_HEAD(&tfile_check_list);
 }
@@ -2196,9 +2199,11 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 					clear_tfile_check_list();
 					goto error_tgt_fput;
 				}
-			} else
+			} else {
+				get_file(tf.file);
 				list_add(&tf.file->f_tfile_llink,
 							&tfile_check_list);
+			}
 			mutex_lock_nested(&ep->mtx, 0);
 			if (is_file_epoll(tf.file)) {
 				tep = tf.file->private_data;

[PATCH 5.4 105/107] do_epoll_ctl(): clean the failure exits up a bit

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 52c479697c9b73f628140dcdfcd39ea302d05482 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/eventpoll.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -2195,10 +2195,8 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 			mutex_lock(&epmutex);
 			if (is_file_epoll(tf.file)) {
 				error = -ELOOP;
-				if (ep_loop_check(ep, tf.file) != 0) {
-					clear_tfile_check_list();
+				if (ep_loop_check(ep, tf.file) != 0)
 					goto error_tgt_fput;
-				}
 			} else {
 				get_file(tf.file);
 				list_add(&tf.file->f_tfile_llink,
@@ -2227,8 +2225,6 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 			error = ep_insert(ep, &epds, tf.file, fd, full_check);
 		} else
 			error = -EEXIST;
-		if (full_check)
-			clear_tfile_check_list();
 		break;
 	case EPOLL_CTL_DEL:
 		if (epi)
@@ -2251,8 +2247,10 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 	mutex_unlock(&ep->mtx);
 
 error_tgt_fput:
-	if (full_check)
+	if (full_check) {
+		clear_tfile_check_list();
 		mutex_unlock(&epmutex);
+	}
 
 	fdput(tf);
 error_fput:

[PATCH 5.4 106/107] mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

[Greg Kroah-Hartman]

From: Peter Xu <peterx@redhat.com>

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream.

This is found by code observation only.

Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing.  The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).

Since at it, remove the loop since it should not be required.  With that,
the new code should be faster too when the invalidating range is huge.

Mike said:

: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable.  The original reason for adjusting the range was to
: prevent data corruption (getting wrong page).  Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.

Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/hugetlb.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -4846,25 +4846,21 @@ static bool vma_shareable(struct vm_area
 void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
 				unsigned long *start, unsigned long *end)
 {
-	unsigned long check_addr = *start;
+	unsigned long a_start, a_end;
 
 	if (!(vma->vm_flags & VM_MAYSHARE))
 		return;
 
-	for (check_addr = *start; check_addr < *end; check_addr += PUD_SIZE) {
-		unsigned long a_start = check_addr & PUD_MASK;
-		unsigned long a_end = a_start + PUD_SIZE;
+	/* Extend the range to be PUD aligned for a worst case scenario */
+	a_start = ALIGN_DOWN(*start, PUD_SIZE);
+	a_end = ALIGN(*end, PUD_SIZE);
 
-		/*
-		 * If sharing is possible, adjust start/end if necessary.
-		 */
-		if (range_in_vma(vma, a_start, a_end)) {
-			if (a_start < *start)
-				*start = a_start;
-			if (a_end > *end)
-				*end = a_end;
-		}
-	}
+	/*
+	 * Intersect the range with the vma range, since pmd sharing won't be
+	 * across vma after all
+	 */
+	*start = max(vma->vm_start, a_start);
+	*end = min(vma->vm_end, a_end);
 }
 
 /*

[PATCH 5.4 107/107] xen: dont reschedule in preemption off sections

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

For support of long running hypercalls xen_maybe_preempt_hcall() is
calling cond_resched() in case a hypercall marked as preemptible has
been interrupted.

Normally this is no problem, as only hypercalls done via some ioctl()s
are marked to be preemptible. In rare cases when during such a
preemptible hypercall an interrupt occurs and any softirq action is
started from irq_exit(), a further hypercall issued by the softirq
handler will be regarded to be preemptible, too. This might lead to
rescheduling in spite of the softirq handler potentially having set
preempt_disable(), leading to splats like:

BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix that by testing preempt_count() before calling cond_resched().

In kernel 5.8 this can't happen any more due to the entry code rework
(more than 100 patches, so not a candidate for backporting).

The issue was introduced in kernel 4.3, so this patch should go into
all stable kernels in [4.3 ... 5.7].

Reported-by: Sarah Newman <srn@prgmr.com>
Fixes: 0fa2f5cb2b0ecd8 ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc: Sarah Newman <srn@prgmr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/preempt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/preempt.c
+++ b/drivers/xen/preempt.c
@@ -27,7 +27,7 @@ EXPORT_SYMBOL_GPL(xen_in_preemptible_hca
 asmlinkage __visible void xen_maybe_preempt_hcall(void)
 {
 	if (unlikely(__this_cpu_read(xen_in_preemptible_hcall)
-		     && need_resched())) {
+		     && need_resched() && !preempt_count())) {
 		/*
 		 * Clear flag as we may be rescheduled on a different
 		 * cpu.