[PATCH v4 00/19] Clean H264 stateless uAPI

[PATCH v4 00/19] Clean H264 stateless uAPI

[Ezequiel Garcia]

New round for the H.264 uAPI cleanup, which as discussed
aims at being stabilized and promoted as a first-class public uAPI soon.

Changelog:

v3->v4:
* Convert enum v4l2_h264_field_reference to a __u8,
  as suggested by Hans. This reduces v4l2_ctrl_h264_slice_params
  from 536 bytes down to 152 bytes, and doesn't really change
  the uAPI. This also removes a hole in struct v4l2_h264_reference
  is removed.
* Drop 'mandatory' requirement on DECODE_MODE and START_MODE,
  in rkvdec driver.

v2->v3:
* Clarify SCALING_MATRIX present flag.
* Implement optional scaling matrix on hantro, rkvdec and cedrus.
* Make prediction weight table properly optional on cedrus.
* Rename field reference types.

v1->v2:
* Clean SLICE_PARAMS documentation, which we don't
  expect to be part of an array anymore. 
* Clarify how frame-based and slice-based modes
  are expected to work.
* Add Cedrus patches to fix field references,
  as requested by Jernej.
* Fix wrongly removed SPS in rkvdec.
* Fix rkvdec DPB reference implementation.
* Fix missing Cedrus and missing control member,
  for prediction weight table control.
* Say "raster scan" instead of "matrix" in the docs.
* Drop duplicated macros and use v4l2_h264_dpb_reference
  for the DPB reference signalling.

RFC->v1: 
* Split prediction weight table to a separate control.
* Increase size of first_mb_in_slice field.
* Cleanup DPB entry interface, to support field coding.
* Increase of DPB entry pic_num field.
* Move slice invariant fields to the per-frame control.

Ezequiel Garcia (15):
  media: uapi: h264: Further clarify scaling lists order
  media: uapi: h264: Split prediction weight parameters
  media: uapi: h264: Increase size of 'first_mb_in_slice' field
  media: uapi: h264: Clean DPB entry interface
  media: uapi: h264: Increase size of DPB entry pic_num
  media: uapi: h264: Drop SLICE_PARAMS 'size' field
  media: uapi: h264: Clarify SLICE_BASED mode
  media: uapi: h264: Clean slice invariants syntax elements
  media: uapi: h264: Rename and clarify PPS_FLAG_SCALING_MATRIX_PRESENT
  media: hantro: Don't require unneeded H264_SLICE_PARAMS
  media: rkvdec: Don't require unneeded H264_SLICE_PARAMS
  media: rkvdec: Drop unneeded per_request driver-specific control flag
  media: rkvdec: Use H264_SCALING_MATRIX only when required
  media: hantro: Use H264_SCALING_MATRIX only when required
  media: cedrus: Use H264_SCALING_MATRIX only when required

Jernej Skrabec (3):
  media: uapi: h264: Update reference lists
  media: cedrus: h264: Properly configure reference field
  media: cedrus: h264: Fix frame list construction

Philipp Zabel (1):
  media: uapi: h264: Clarify pic_order_cnt_bit_size field

 .../media/v4l/ext-ctrls-codec.rst             | 233 ++++++++++--------
 drivers/media/v4l2-core/v4l2-ctrls.c          |  28 +++
 drivers/media/v4l2-core/v4l2-h264.c           |  12 +-
 drivers/staging/media/hantro/hantro_drv.c     |   5 -
 .../staging/media/hantro/hantro_g1_h264_dec.c |  26 +-
 drivers/staging/media/hantro/hantro_h264.c    |  12 +-
 drivers/staging/media/hantro/hantro_hw.h      |   2 -
 drivers/staging/media/rkvdec/rkvdec-h264.c    |  37 ++-
 drivers/staging/media/rkvdec/rkvdec.c         |  14 +-
 drivers/staging/media/rkvdec/rkvdec.h         |   1 -
 drivers/staging/media/sunxi/cedrus/cedrus.c   |   9 +-
 drivers/staging/media/sunxi/cedrus/cedrus.h   |   1 +
 .../staging/media/sunxi/cedrus/cedrus_dec.c   |   2 +
 .../staging/media/sunxi/cedrus/cedrus_h264.c  |  61 +++--
 include/media/h264-ctrls.h                    |  87 ++++---
 include/media/v4l2-ctrls.h                    |   2 +
 include/media/v4l2-h264.h                     |   3 +-
 17 files changed, 290 insertions(+), 245 deletions(-)

-- 
2.27.0

[PATCH v4 01/19] media: uapi: h264: Update reference lists

[Ezequiel Garcia]

From: Jernej Skrabec <jernej.skrabec@siol.net>

When dealing with interlaced frames, reference lists must tell if
each particular reference is meant for top or bottom field. This info
is currently not provided at all in the H264 related controls.

Change reference lists to hold a structure, which specifies
an index into the DPB array and the field/frame specification
for the picture.

Currently the only user of these lists is Cedrus which is just compile
fixed here. Actual usage of will come in a following commit.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v4:
* As suggested by Hans, reduce the footprint
  and solve the holes by converting the enum to a simple char.
v3:
* Rename to avoid mentioning the DPB.
v2:
* As pointed out by Jonas, enum v4l2_h264_dpb_reference here.
---
 .../media/v4l/ext-ctrls-codec.rst             | 44 ++++++++++++++++++-
 .../staging/media/sunxi/cedrus/cedrus_h264.c  |  6 +--
 include/media/h264-ctrls.h                    | 21 ++++++---
 3 files changed, 60 insertions(+), 11 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index d0d506a444b1..df1c4fc5cb48 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1843,10 +1843,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - __u32
       - ``slice_group_change_cycle``
       -
-    * - __u8
+    * - struct :c:type:`v4l2_h264_reference`
       - ``ref_pic_list0[32]``
       - Reference picture list after applying the per-slice modifications
-    * - __u8
+    * - struct :c:type:`v4l2_h264_reference`
       - ``ref_pic_list1[32]``
       - Reference picture list after applying the per-slice modifications
     * - __u32
@@ -1926,6 +1926,46 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - ``chroma_offset[32][2]``
       -
 
+``Picture Reference``
+
+.. c:type:: v4l2_h264_reference
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_reference
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``fields``
+      - Specifies how the picture is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+    * - __u8
+      - ``index``
+      - Index into the :c:type:`v4l2_ctrl_h264_decode_params`.dpb array.
+
+.. _h264_ref_fields:
+
+``Reference Fields``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_TOP_FIELD_REF``
+      - 0x1
+      - The top field in field pair is used for short-term reference.
+    * - ``V4L2_H264_BOTTOM_FIELD_REF``
+      - 0x2
+      - The bottom field in field pair is used for short-term reference.
+    * - ``V4L2_H264_FRAME_REF``
+      - 0x3
+      - The frame (or the top/bottom fields, if it's a field pair)
+        is used for short-term reference.
+
 ``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
     Specifies the decode parameters (as extracted from the bitstream)
     for the associated H264 slice data. This includes the necessary
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index 54ee2aa423e2..cce527bbdf86 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -166,8 +166,8 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 
 static void _cedrus_write_ref_list(struct cedrus_ctx *ctx,
 				   struct cedrus_run *run,
-				   const u8 *ref_list, u8 num_ref,
-				   enum cedrus_h264_sram_off sram)
+				   const struct v4l2_h264_reference *ref_list,
+				   u8 num_ref, enum cedrus_h264_sram_off sram)
 {
 	const struct v4l2_ctrl_h264_decode_params *decode = run->h264.decode_params;
 	struct vb2_queue *cap_q;
@@ -188,7 +188,7 @@ static void _cedrus_write_ref_list(struct cedrus_ctx *ctx,
 		int buf_idx;
 		u8 dpb_idx;
 
-		dpb_idx = ref_list[i];
+		dpb_idx = ref_list[i].index;
 		dpb = &decode->dpb[dpb_idx];
 
 		if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 080fd1293c42..3c613b84e5ae 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -19,6 +19,8 @@
  */
 #define V4L2_H264_NUM_DPB_ENTRIES 16
 
+#define V4L2_H264_REF_LIST_LEN (2 * V4L2_H264_NUM_DPB_ENTRIES)
+
 /* Our pixel format isn't stable at the moment */
 #define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */
 
@@ -140,6 +142,17 @@ struct v4l2_h264_pred_weight_table {
 #define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED	0x04
 #define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH		0x08
 
+#define V4L2_H264_TOP_FIELD_REF				0x1
+#define V4L2_H264_BOTTOM_FIELD_REF			0x2
+#define V4L2_H264_FRAME_REF				0x3
+
+struct v4l2_h264_reference {
+	__u8 fields;
+
+	/* Index into v4l2_ctrl_h264_decode_params.dpb[] */
+	__u8 index;
+};
+
 struct v4l2_ctrl_h264_slice_params {
 	/* Size in bytes, including header */
 	__u32 size;
@@ -178,12 +191,8 @@ struct v4l2_ctrl_h264_slice_params {
 	__u8 num_ref_idx_l1_active_minus1;
 	__u32 slice_group_change_cycle;
 
-	/*
-	 * Entries on each list are indices into
-	 * v4l2_ctrl_h264_decode_params.dpb[].
-	 */
-	__u8 ref_pic_list0[32];
-	__u8 ref_pic_list1[32];
+	struct v4l2_h264_reference ref_pic_list0[V4L2_H264_REF_LIST_LEN];
+	struct v4l2_h264_reference ref_pic_list1[V4L2_H264_REF_LIST_LEN];
 
 	__u32 flags;
 };
-- 
2.27.0

[PATCH v4 02/19] media: uapi: h264: Further clarify scaling lists order

[Ezequiel Garcia]

Commit 0b0393d59eb4a ("media: uapi: h264: clarify
expected scaling_list_4x4/8x8 order") improved the
documentation on H264 scaling lists order.

This commit improves the documentation by clarifying
that the lists themselves are expected in raster scan order.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v2:
* Use "raster scan order" instead of "matrix order"
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index df1c4fc5cb48..2cce412f5be1 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1725,12 +1725,14 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - ``scaling_list_4x4[6][16]``
       - Scaling matrix after applying the inverse scanning process.
         Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y,
-        Inter Cb, Inter Cr.
+        Inter Cb, Inter Cr. The values on each scaling list are
+        expected in raster scan order.
     * - __u8
       - ``scaling_list_8x8[6][64]``
       - Scaling matrix after applying the inverse scanning process.
         Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb,
-        Intra Cr, Inter Cr.
+        Intra Cr, Inter Cr. The values on each scaling list are
+        expected in raster scan order.
 
 ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
     Specifies the slice parameters (as extracted from the bitstream)
-- 
2.27.0

[PATCH v4 03/19] media: uapi: h264: Split prediction weight parameters

[Ezequiel Garcia]

The prediction weight parameters are only required under
certain conditions, which depend on slice header parameters.

As specified in section 7.3.3 Slice header syntax, the prediction
weight table is present if:

((weighted_pred_flag && (slice_type == P || slice_type == SP)) || \
(weighted_bipred_idc == 1 && slice_type == B))

Given its size, it makes sense to move this table to its control,
so applications can avoid passing it if the slice doesn't specify it.

Before this change struct v4l2_ctrl_h264_slice_params was 960 bytes.
With this change, it's 188 bytes and struct v4l2_ctrl_h264_pred_weight
is 772 bytes.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v3:
* As suggested by Jonas, add a macro for the prediction
  weight table condition and make the control optional
  in cedrus.
v2:
* Fix missing Cedrus changes and mssing control declaration,
  as noted by Hans and Jernej.
---
 .../media/v4l/ext-ctrls-codec.rst             | 19 ++++++++++++-------
 drivers/media/v4l2-core/v4l2-ctrls.c          |  8 ++++++++
 drivers/staging/media/sunxi/cedrus/cedrus.c   |  7 +++++++
 drivers/staging/media/sunxi/cedrus/cedrus.h   |  1 +
 .../staging/media/sunxi/cedrus/cedrus_dec.c   |  2 ++
 .../staging/media/sunxi/cedrus/cedrus_h264.c  | 12 +++---------
 include/media/h264-ctrls.h                    | 12 ++++++++++--
 include/media/v4l2-ctrls.h                    |  2 ++
 8 files changed, 45 insertions(+), 18 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 2cce412f5be1..9e4421a7c6a6 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1879,18 +1879,23 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - 0x00000008
       -
 
-``Prediction Weight Table``
+``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)``
+    Prediction weight table defined according to :ref:`h264`,
+    section 7.4.3.2 "Prediction Weight Table Semantics".
+    The prediction weight table must be passed by applications
+    under the conditions explained in section 7.3.3 "Slice header
+    syntax".
 
-    The bitstream parameters are defined according to :ref:`h264`,
-    section 7.4.3.2 "Prediction Weight Table Semantics". For further
-    documentation, refer to the above specification, unless there is
-    an explicit comment stating otherwise.
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
 
-.. c:type:: v4l2_h264_pred_weight_table
+.. c:type:: v4l2_ctrl_h264_pred_weights
 
 .. cssclass:: longtable
 
-.. flat-table:: struct v4l2_h264_pred_weight_table
+.. flat-table:: struct v4l2_ctrl_h264_pred_weights
     :header-rows:  0
     :stub-columns: 0
     :widths:       1 1 2
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 3f3fbcd60cc6..76c8dc8fb31c 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -897,6 +897,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:		return "H264 Decode Parameters";
 	case V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE:		return "H264 Decode Mode";
 	case V4L2_CID_MPEG_VIDEO_H264_START_CODE:		return "H264 Start Code";
+	case V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS:		return "H264 Prediction Weight Table";
 	case V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL:			return "MPEG2 Level";
 	case V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE:			return "MPEG2 Profile";
 	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:		return "MPEG4 I-Frame QP Value";
@@ -1412,6 +1413,9 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:
 		*type = V4L2_CTRL_TYPE_H264_DECODE_PARAMS;
 		break;
+	case V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS:
+		*type = V4L2_CTRL_TYPE_H264_PRED_WEIGHTS;
+		break;
 	case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER:
 		*type = V4L2_CTRL_TYPE_VP8_FRAME_HEADER;
 		break;
@@ -1790,6 +1794,7 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_H264_SPS:
 	case V4L2_CTRL_TYPE_H264_PPS:
 	case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
+	case V4L2_CTRL_TYPE_H264_PRED_WEIGHTS:
 	case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
 	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
 		break;
@@ -2553,6 +2558,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
 		elem_size = sizeof(struct v4l2_ctrl_h264_decode_params);
 		break;
+	case V4L2_CTRL_TYPE_H264_PRED_WEIGHTS:
+		elem_size = sizeof(struct v4l2_ctrl_h264_pred_weights);
+		break;
 	case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
 		elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header);
 		break;
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index bc27f9430eeb..826324faad7e 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -78,6 +78,13 @@ static const struct cedrus_control cedrus_controls[] = {
 		.codec		= CEDRUS_CODEC_H264,
 		.required	= true,
 	},
+	{
+		.cfg = {
+			.id	= V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS,
+		},
+		.codec		= CEDRUS_CODEC_H264,
+		.required	= false,
+	},
 	{
 		.cfg = {
 			.id	= V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE,
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.h b/drivers/staging/media/sunxi/cedrus/cedrus.h
index 96765555ab8a..93c843ae14bb 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.h
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.h
@@ -62,6 +62,7 @@ struct cedrus_h264_run {
 	const struct v4l2_ctrl_h264_scaling_matrix	*scaling_matrix;
 	const struct v4l2_ctrl_h264_slice_params	*slice_params;
 	const struct v4l2_ctrl_h264_sps			*sps;
+	const struct v4l2_ctrl_h264_pred_weights	*pred_weights;
 };
 
 struct cedrus_mpeg2_run {
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
index 58c48e4fdfe9..6385026d1b6b 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_dec.c
@@ -57,6 +57,8 @@ void cedrus_device_run(void *priv)
 			V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS);
 		run.h264.sps = cedrus_find_control_data(ctx,
 			V4L2_CID_MPEG_VIDEO_H264_SPS);
+		run.h264.pred_weights = cedrus_find_control_data(ctx,
+			V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS);
 		break;
 
 	case V4L2_PIX_FMT_HEVC_SLICE:
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index cce527bbdf86..d5636dbbb622 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -256,10 +256,8 @@ static void cedrus_write_scaling_lists(struct cedrus_ctx *ctx,
 static void cedrus_write_pred_weight_table(struct cedrus_ctx *ctx,
 					   struct cedrus_run *run)
 {
-	const struct v4l2_ctrl_h264_slice_params *slice =
-		run->h264.slice_params;
-	const struct v4l2_h264_pred_weight_table *pred_weight =
-		&slice->pred_weight_table;
+	const struct v4l2_ctrl_h264_pred_weights *pred_weight =
+		run->h264.pred_weights;
 	struct cedrus_dev *dev = ctx->dev;
 	int i, j, k;
 
@@ -367,11 +365,7 @@ static void cedrus_set_params(struct cedrus_ctx *ctx,
 
 	cedrus_skip_bits(dev, slice->header_bit_size);
 
-	if (((pps->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED) &&
-	     (slice->slice_type == V4L2_H264_SLICE_TYPE_P ||
-	      slice->slice_type == V4L2_H264_SLICE_TYPE_SP)) ||
-	    (pps->weighted_bipred_idc == 1 &&
-	     slice->slice_type == V4L2_H264_SLICE_TYPE_B))
+	if (V4L2_H264_CTRL_PRED_WEIGHTS_REQUIRED(pps, slice))
 		cedrus_write_pred_weight_table(ctx, run);
 
 	if ((slice->slice_type == V4L2_H264_SLICE_TYPE_P) ||
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 3c613b84e5ae..31c6f4c5963b 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -36,6 +36,7 @@
 #define V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS	(V4L2_CID_MPEG_BASE+1004)
 #define V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE	(V4L2_CID_MPEG_BASE+1005)
 #define V4L2_CID_MPEG_VIDEO_H264_START_CODE	(V4L2_CID_MPEG_BASE+1006)
+#define V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS	(V4L2_CID_MPEG_BASE+1007)
 
 /* enum v4l2_ctrl_type type values */
 #define V4L2_CTRL_TYPE_H264_SPS			0x0110
@@ -43,6 +44,7 @@
 #define V4L2_CTRL_TYPE_H264_SCALING_MATRIX	0x0112
 #define V4L2_CTRL_TYPE_H264_SLICE_PARAMS	0x0113
 #define V4L2_CTRL_TYPE_H264_DECODE_PARAMS	0x0114
+#define V4L2_CTRL_TYPE_H264_PRED_WEIGHTS	0x0115
 
 enum v4l2_mpeg_video_h264_decode_mode {
 	V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED,
@@ -125,7 +127,14 @@ struct v4l2_h264_weight_factors {
 	__s16 chroma_offset[32][2];
 };
 
-struct v4l2_h264_pred_weight_table {
+#define V4L2_H264_CTRL_PRED_WEIGHTS_REQUIRED(pps, slice) \
+	((((pps)->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED) && \
+	 ((slice)->slice_type == V4L2_H264_SLICE_TYPE_P || \
+	  (slice)->slice_type == V4L2_H264_SLICE_TYPE_SP)) || \
+	 ((pps)->weighted_bipred_idc == 1 && \
+	  (slice)->slice_type == V4L2_H264_SLICE_TYPE_B))
+
+struct v4l2_ctrl_h264_pred_weights {
 	__u16 luma_log2_weight_denom;
 	__u16 chroma_log2_weight_denom;
 	struct v4l2_h264_weight_factors weight_factors[2];
@@ -175,7 +184,6 @@ struct v4l2_ctrl_h264_slice_params {
 	__s32 delta_pic_order_cnt0;
 	__s32 delta_pic_order_cnt1;
 
-	struct v4l2_h264_pred_weight_table pred_weight_table;
 	/* Size in bits of dec_ref_pic_marking() syntax element. */
 	__u32 dec_ref_pic_marking_bit_size;
 	/* Size in bits of pic order count syntax. */
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index f40e2cbb21d3..cb25f345e9ad 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -51,6 +51,7 @@ struct video_device;
  * @p_h264_scaling_matrix:	Pointer to a struct v4l2_ctrl_h264_scaling_matrix.
  * @p_h264_slice_params:	Pointer to a struct v4l2_ctrl_h264_slice_params.
  * @p_h264_decode_params:	Pointer to a struct v4l2_ctrl_h264_decode_params.
+ * @p_h264_pred_weights:	Pointer to a struct v4l2_ctrl_h264_pred_weights.
  * @p_vp8_frame_header:		Pointer to a VP8 frame header structure.
  * @p_hevc_sps:			Pointer to an HEVC sequence parameter set structure.
  * @p_hevc_pps:			Pointer to an HEVC picture parameter set structure.
@@ -74,6 +75,7 @@ union v4l2_ctrl_ptr {
 	struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix;
 	struct v4l2_ctrl_h264_slice_params *p_h264_slice_params;
 	struct v4l2_ctrl_h264_decode_params *p_h264_decode_params;
+	struct v4l2_ctrl_h264_pred_weights *p_h264_pred_weights;
 	struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header;
 	struct v4l2_ctrl_hevc_sps *p_hevc_sps;
 	struct v4l2_ctrl_hevc_pps *p_hevc_pps;
-- 
2.27.0

[PATCH v4 04/19] media: uapi: h264: Clarify pic_order_cnt_bit_size field

[Ezequiel Garcia]

From: Philipp Zabel <p.zabel@pengutronix.de>

Since pic_order_cnt_bit_size is not a syntax element itself, explicitly
state that it is the total size in bits of the pic_order_cnt_lsb,
delta_pic_order_cnt_bottom, delta_pic_order_cnt[0], and
delta_pic_order_cnt[1] syntax elements contained in the slice.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[Ezequiel: rebase]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 9e4421a7c6a6..591d3d35c429 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1815,7 +1815,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - Size in bits of the dec_ref_pic_marking() syntax element.
     * - __u32
       - ``pic_order_cnt_bit_size``
-      -
+      - Combined size in bits of the picture order count related syntax
+        elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
+        delta_pic_order_cnt0, and delta_pic_order_cnt1.
     * - __u8
       - ``cabac_init_idc``
       -
-- 
2.27.0

[PATCH v4 05/19] media: uapi: h264: Increase size of 'first_mb_in_slice' field

[Ezequiel Garcia]

Slice header syntax element 'first_mb_in_slice' can point
to the last macroblock, currently the field can only reference
65536 macroblocks which is insufficient for 8K videos.

Although unlikely, a 8192x4320 video (where macroblocks are 16x16),
would contain 138240 macroblocks on a frame.

As per the H264 specification, 'first_mb_in_slice' can be up to
PicSizeInMbs - 1, so increase the size of the field to 32-bits.

Note that v4l2_ctrl_h264_slice_params struct will be modified
in a follow-up commit, and so we defer its 64-bit padding.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 2 +-
 include/media/h264-ctrls.h                                | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 591d3d35c429..a417a1ae50d5 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1774,7 +1774,7 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - __u32
       - ``header_bit_size``
       -
-    * - __u16
+    * - __u32
       - ``first_mb_in_slice``
       -
     * - __u8
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 31c6f4c5963b..9a6722edf004 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -172,7 +172,8 @@ struct v4l2_ctrl_h264_slice_params {
 	/* Offset in bits to slice_data() from the beginning of this slice. */
 	__u32 header_bit_size;
 
-	__u16 first_mb_in_slice;
+	__u32 first_mb_in_slice;
+
 	__u8 slice_type;
 	__u8 pic_parameter_set_id;
 	__u8 colour_plane_id;
-- 
2.27.0

[PATCH v4 06/19] media: uapi: h264: Clean DPB entry interface

[Ezequiel Garcia]

As discussed recently, the current interface for the
Decoded Picture Buffer is not enough to properly
support field coding.

This commit introduces enough semantics to support
frame and field coding, and to signal how DPB entries
are "used for reference".

Reserved fields will be added by a follow-up commit.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v4:
* Port to renamed fields.
v3:
* Port to renamed types.
v2:
* Fix rkvdec usage of fields flags as noted by Jonas.
---
 .../media/v4l/ext-ctrls-codec.rst             | 24 ++++++-------------
 drivers/media/v4l2-core/v4l2-h264.c           |  4 ++--
 drivers/staging/media/rkvdec/rkvdec-h264.c    | 17 ++++++-------
 include/media/h264-ctrls.h                    |  2 +-
 4 files changed, 19 insertions(+), 28 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index a417a1ae50d5..49febae8fd0f 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2057,6 +2057,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - __u16
       - ``pic_num``
       -
+    * - __u8
+      - ``fields``
+      - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>`
     * - __s32
       - ``top_field_order_cnt``
       -
@@ -2080,29 +2083,16 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
 
     * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
       - 0x00000001
-      - The DPB entry is valid and should be considered
+      - The DPB entry is valid (non-empty) and should be considered.
     * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
       - 0x00000002
-      - The DPB entry is currently being used as a reference frame
+      - The DPB entry is used for reference.
     * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
       - 0x00000004
-      - The DPB entry is a long term reference frame
+      - The DPB entry is used for long-term reference.
     * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
       - 0x00000008
-      - The DPB entry is a field reference, which means only one of the field
-        will be used when decoding the new frame/field. When not set the DPB
-        entry is a frame reference (both fields will be used). Note that this
-        flag does not say anything about the number of fields contained in the
-        reference frame, it just describes the one used to decode the new
-        field/frame
-    * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD``
-      - 0x00000010
-      - The DPB entry is a bottom field reference (only the bottom field of the
-        reference frame is needed to decode the new frame/field). Only valid if
-        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When
-        V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but
-        V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the
-        DPB entry is a top field reference
+      - The DPB entry is a single field or a complementary field pair.
 
 ``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
     Specifies the decoding mode to use. Currently exposes slice-based and
diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c
index edf6225f0522..f4742408436b 100644
--- a/drivers/media/v4l2-core/v4l2-h264.c
+++ b/drivers/media/v4l2-core/v4l2-h264.c
@@ -66,10 +66,10 @@ v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
 		else
 			b->refs[i].frame_num = dpb[i].frame_num;
 
-		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
+		if (dpb[i].fields == V4L2_H264_FRAME_REF)
 			pic_order_count = min(dpb[i].top_field_order_cnt,
 					      dpb[i].bottom_field_order_cnt);
-		else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
+		else if (dpb[i].fields & V4L2_H264_BOTTOM_FIELD_REF)
 			pic_order_count = dpb[i].bottom_field_order_cnt;
 		else
 			pic_order_count = dpb[i].top_field_order_cnt;
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 7b66e2743a4f..d1f2715f30ae 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -949,16 +949,17 @@ static void config_registers(struct rkvdec_ctx *ctx,
 	for (i = 0; i < ARRAY_SIZE(dec_params->dpb); i++) {
 		struct vb2_buffer *vb_buf = get_ref_buf(ctx, run, i);
 
-		refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0) |
-			     RKVDEC_COLMV_USED_FLAG_REF;
+		refer_addr = vb2_dma_contig_plane_dma_addr(vb_buf, 0);
 
-		if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
-			refer_addr |= RKVDEC_TOPFIELD_USED_REF |
-				      RKVDEC_BOTFIELD_USED_REF;
-		else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
-			refer_addr |= RKVDEC_BOTFIELD_USED_REF;
-		else
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
+			refer_addr |= RKVDEC_COLMV_USED_FLAG_REF;
+		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD)
+			refer_addr |= RKVDEC_FIELD_REF;
+
+		if (dpb[i].fields & V4L2_H264_TOP_FIELD_REF)
 			refer_addr |= RKVDEC_TOPFIELD_USED_REF;
+		if (dpb[i].fields & V4L2_H264_BOTTOM_FIELD_REF)
+			refer_addr |= RKVDEC_BOTFIELD_USED_REF;
 
 		writel_relaxed(dpb[i].top_field_order_cnt,
 			       rkvdec->regs +  poc_reg_tbl_top_field[i]);
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 9a6722edf004..0529e75cce5f 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -210,12 +210,12 @@ struct v4l2_ctrl_h264_slice_params {
 #define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE		0x02
 #define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM	0x04
 #define V4L2_H264_DPB_ENTRY_FLAG_FIELD		0x08
-#define V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD	0x10
 
 struct v4l2_h264_dpb_entry {
 	__u64 reference_ts;
 	__u16 frame_num;
 	__u16 pic_num;
+	__u8 fields;
 	/* Note that field is indicated by v4l2_buffer.field */
 	__s32 top_field_order_cnt;
 	__s32 bottom_field_order_cnt;
-- 
2.27.0

[PATCH v4 07/19] media: uapi: h264: Increase size of DPB entry pic_num

[Ezequiel Garcia]

DPB entry PicNum maximum value is 2*MaxFrameNum for interlaced
content (field_pic_flag=1).

As specified, MaxFrameNum is 2^(log2_max_frame_num_minus4 + 4)
and log2_max_frame_num_minus4 is in the range of 0 to 12,
which means pic_num should be a 32-bit field.

The v4l2_h264_dpb_entry struct needs to be padded to avoid a hole,
which might be also useful to allow future uAPI extensions.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../userspace-api/media/v4l/ext-ctrls-codec.rst     |  9 ++++++---
 drivers/media/v4l2-core/v4l2-ctrls.c                | 13 +++++++++++++
 include/media/h264-ctrls.h                          |  3 ++-
 include/media/v4l2-h264.h                           |  2 +-
 4 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 49febae8fd0f..3808c46718ad 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2051,15 +2051,18 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
         ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
         :c:func:`v4l2_timeval_to_ns()` function to convert the struct
         :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
-    * - __u16
-      - ``frame_num``
+    * - __u32
+      - ``pic_num``
       -
     * - __u16
-      - ``pic_num``
+      - ``frame_num``
       -
     * - __u8
       - ``fields``
       - Specifies how the DPB entry is referenced. See :ref:`Reference Fields <h264_ref_fields>`
+    * - __u8
+      - ``reserved[5]``
+      - Applications and drivers must set this to zero.
     * - __s32
       - ``top_field_order_cnt``
       -
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 76c8dc8fb31c..b9457789fa55 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -1725,6 +1725,8 @@ static void std_log(const struct v4l2_ctrl *ctrl)
 
 #define zero_padding(s) \
 	memset(&(s).padding, 0, sizeof((s).padding))
+#define zero_reserved(s) \
+	memset(&(s).reserved, 0, sizeof((s).reserved))
 
 /*
  * Compound controls validation requires setting unused fields/flags to zero
@@ -1735,6 +1737,7 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 {
 	struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params;
 	struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header;
+	struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
 	struct v4l2_ctrl_hevc_sps *p_hevc_sps;
 	struct v4l2_ctrl_hevc_pps *p_hevc_pps;
 	struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params;
@@ -1796,7 +1799,17 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
 	case V4L2_CTRL_TYPE_H264_PRED_WEIGHTS:
 	case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
+		break;
+
 	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
+		p_h264_dec_params = p;
+
+		for (i = 0; i < V4L2_H264_NUM_DPB_ENTRIES; i++) {
+			struct v4l2_h264_dpb_entry *dpb_entry =
+				&p_h264_dec_params->dpb[i];
+
+			zero_reserved(*dpb_entry);
+		}
 		break;
 
 	case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 0529e75cce5f..91f6f0d43e11 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -213,9 +213,10 @@ struct v4l2_ctrl_h264_slice_params {
 
 struct v4l2_h264_dpb_entry {
 	__u64 reference_ts;
+	__u32 pic_num;
 	__u16 frame_num;
-	__u16 pic_num;
 	__u8 fields;
+	__u8 reserved[5];
 	/* Note that field is indicated by v4l2_buffer.field */
 	__s32 top_field_order_cnt;
 	__s32 bottom_field_order_cnt;
diff --git a/include/media/v4l2-h264.h b/include/media/v4l2-h264.h
index bc9ebb560ccf..1a5f26fc2a9a 100644
--- a/include/media/v4l2-h264.h
+++ b/include/media/v4l2-h264.h
@@ -33,7 +33,7 @@ struct v4l2_h264_reflist_builder {
 	struct {
 		s32 pic_order_count;
 		int frame_num;
-		u16 pic_num;
+		u32 pic_num;
 		u16 longterm : 1;
 	} refs[V4L2_H264_NUM_DPB_ENTRIES];
 	s32 cur_pic_order_count;
-- 
2.27.0

[PATCH v4 08/19] media: uapi: h264: Drop SLICE_PARAMS 'size' field

[Ezequiel Garcia]

The SLICE_PARAMS control is intended for slice-based
devices. In this mode, the OUTPUT buffer contains
a single slice, and so the buffer's plane payload size
can be used to query the slice size.

To reduce the API surface drop the size from the
SLICE_PARAMS control.

A follow-up change will remove other members in SLICE_PARAMS
so we don't need to add padding fields here.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 3 ---
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c          | 7 +++----
 include/media/h264-ctrls.h                                | 3 ---
 3 files changed, 3 insertions(+), 10 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 3808c46718ad..e74a2531ab67 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1760,9 +1760,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - __u32
-      - ``size``
-      -
     * - __u32
       - ``start_byte_offset``
         Offset (in bytes) from the beginning of the OUTPUT buffer to the start
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index d5636dbbb622..7d9bd5860a1b 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -324,17 +324,16 @@ static void cedrus_set_params(struct cedrus_ctx *ctx,
 	struct vb2_buffer *src_buf = &run->src->vb2_buf;
 	struct cedrus_dev *dev = ctx->dev;
 	dma_addr_t src_buf_addr;
-	u32 len = slice->size * 8;
+	size_t slice_bytes = vb2_get_plane_payload(src_buf, 0);
 	unsigned int pic_width_in_mbs;
 	bool mbaff_pic;
 	u32 reg;
 
-	cedrus_write(dev, VE_H264_VLD_LEN, len);
+	cedrus_write(dev, VE_H264_VLD_LEN, slice_bytes * 8);
 	cedrus_write(dev, VE_H264_VLD_OFFSET, 0);
 
 	src_buf_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
-	cedrus_write(dev, VE_H264_VLD_END,
-		     src_buf_addr + vb2_get_plane_payload(src_buf, 0));
+	cedrus_write(dev, VE_H264_VLD_END, src_buf_addr + slice_bytes);
 	cedrus_write(dev, VE_H264_VLD_ADDR,
 		     VE_H264_VLD_ADDR_VAL(src_buf_addr) |
 		     VE_H264_VLD_ADDR_FIRST | VE_H264_VLD_ADDR_VALID |
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 91f6f0d43e11..77d0ec51ae43 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -163,9 +163,6 @@ struct v4l2_h264_reference {
 };
 
 struct v4l2_ctrl_h264_slice_params {
-	/* Size in bytes, including header */
-	__u32 size;
-
 	/* Offset in bytes to the start of slice in the OUTPUT buffer. */
 	__u32 start_byte_offset;
 
-- 
2.27.0

[PATCH v4 09/19] media: uapi: h264: Clarify SLICE_BASED mode

[Ezequiel Garcia]

Currently, the SLICE_BASED and FRAME_BASED modes documentation
is misleading and not matching the intended use-cases.

Drop non-required fields SLICE_PARAMS 'start_byte_offset' and
DECODE_PARAMS 'num_slices' and clarify the decoding modes in the
documentation.

On SLICE_BASED mode, a single slice is expected per OUTPUT buffer,
and therefore 'start_byte_offset' is not needed (since the offset
to the slice is the start of the buffer).

This mode requires the use of CAPTURE buffer holding, and so
the number of slices shall not be required.

On FRAME_BASED mode, the devices are expected to take care of slice
parsing. Neither SLICE_PARAMS are required (and shouldn't be
exposed by frame-based drivers), nor the number of slices.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../media/v4l/ext-ctrls-codec.rst             | 39 +++++--------------
 include/media/h264-ctrls.h                    |  4 --
 2 files changed, 10 insertions(+), 33 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index e74a2531ab67..304b6012b358 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1748,9 +1748,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
        This compound control is not yet part of the public kernel API
        and it is expected to change.
 
-       This structure is expected to be passed as an array, with one
-       entry for each slice included in the bitstream buffer.
-
 .. c:type:: v4l2_ctrl_h264_slice_params
 
 .. cssclass:: longtable
@@ -1760,17 +1757,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - __u32
-      - ``start_byte_offset``
-        Offset (in bytes) from the beginning of the OUTPUT buffer to the start
-        of the slice. If the slice starts with a start code, then this is the
-        offset to such start code. When operating in slice-based decoding mode
-        (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should
-        be set to 0. When operating in frame-based decoding mode, this field
-        should be 0 for the first slice.
     * - __u32
       - ``header_bit_size``
-      -
+      - Offset in bits to slice_data() from the beginning of this slice.
     * - __u32
       - ``first_mb_in_slice``
       -
@@ -1998,12 +1987,6 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - struct :c:type:`v4l2_h264_dpb_entry`
       - ``dpb[16]``
       -
-    * - __u16
-      - ``num_slices``
-      - Number of slices needed to decode the current frame/field. When
-        operating in slice-based decoding mode (see
-        :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field
-        should always be set to one.
     * - __u16
       - ``nal_ref_idc``
       - NAL reference ID value coming from the NAL Unit header
@@ -2121,22 +2104,20 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED``
       - 0
       - Decoding is done at the slice granularity.
-        In this mode, ``num_slices`` field in struct
-        :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1,
-        and ``start_byte_offset`` in struct
-        :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0.
         The OUTPUT buffer must contain a single slice.
+        When this mode is selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
+        control shall be set. When multiple slices compose a frame,
+        use of ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` flag
+        is required.
     * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED``
       - 1
-      - Decoding is done at the frame granularity.
-        In this mode, ``num_slices`` field in struct
-        :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number
-        of slices in the frame, and ``start_byte_offset`` in struct
-        :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly
-        for each slice. For the first slice, ``start_byte_offset`` should
-        be zero.
+      - Decoding is done at the frame granularity,
         The OUTPUT buffer must contain all slices needed to decode the
         frame. The OUTPUT buffer must also contain both fields.
+        This mode will be supported by devices that
+        parse the slice(s) header(s) in hardware. When this mode is
+        selected, the ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS``
+        control shall not be set.
 
 ``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)``
     Specifies the H264 slice start code expected for each slice.
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 77d0ec51ae43..e4cae02a765f 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -163,9 +163,6 @@ struct v4l2_h264_reference {
 };
 
 struct v4l2_ctrl_h264_slice_params {
-	/* Offset in bytes to the start of slice in the OUTPUT buffer. */
-	__u32 start_byte_offset;
-
 	/* Offset in bits to slice_data() from the beginning of this slice. */
 	__u32 header_bit_size;
 
@@ -224,7 +221,6 @@ struct v4l2_h264_dpb_entry {
 
 struct v4l2_ctrl_h264_decode_params {
 	struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES];
-	__u16 num_slices;
 	__u16 nal_ref_idc;
 	__s32 top_field_order_cnt;
 	__s32 bottom_field_order_cnt;
-- 
2.27.0

[PATCH v4 10/19] media: uapi: h264: Clean slice invariants syntax elements

[Ezequiel Garcia]

The H.264 specification requires in section 7.4.3 "Slice header semantics",
that the following values shall be the same in all slice headers:

  pic_parameter_set_id
  frame_num
  field_pic_flag
  bottom_field_flag
  idr_pic_id
  pic_order_cnt_lsb
  delta_pic_order_cnt_bottom
  delta_pic_order_cnt[ 0 ]
  delta_pic_order_cnt[ 1 ]
  sp_for_switch_flag
  slice_group_change_cycle

These bitstream fields are part of the slice header, and therefore
passed redundantly on each slice. The purpose of the redundancy
is to make the codec fault-tolerant in network scenarios.

This is of course not needed to be reflected in the V4L2 controls,
given the bitstream has already been parsed by applications.
Therefore, move the redundant fields to the per-frame decode
parameters control (DECODE_PARAMS).

Field 'pic_parameter_set_id' is simply removed in this case,
because the PPS control must currently contain the active PPS.

Syntax elements dec_ref_pic_marking() and those related
to pic order count, remain invariant as well, and therefore,
the fields dec_ref_pic_marking_bit_size and pic_order_cnt_bit_size
are also common to all slices.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../media/v4l/ext-ctrls-codec.rst             | 86 +++++++++----------
 drivers/media/v4l2-core/v4l2-ctrls.c          |  7 ++
 drivers/media/v4l2-core/v4l2-h264.c           |  8 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c | 21 +++--
 drivers/staging/media/hantro/hantro_h264.c    |  3 +-
 drivers/staging/media/rkvdec/rkvdec-h264.c    |  6 +-
 .../staging/media/sunxi/cedrus/cedrus_h264.c  |  9 +-
 include/media/h264-ctrls.h                    | 39 +++++----
 include/media/v4l2-h264.h                     |  1 -
 9 files changed, 90 insertions(+), 90 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 304b6012b358..4cd9fd9c5a89 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1766,44 +1766,12 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - __u8
       - ``slice_type``
       -
-    * - __u8
-      - ``pic_parameter_set_id``
-      -
     * - __u8
       - ``colour_plane_id``
       -
     * - __u8
       - ``redundant_pic_cnt``
       -
-    * - __u16
-      - ``frame_num``
-      -
-    * - __u16
-      - ``idr_pic_id``
-      -
-    * - __u16
-      - ``pic_order_cnt_lsb``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt_bottom``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt0``
-      -
-    * - __s32
-      - ``delta_pic_order_cnt1``
-      -
-    * - struct :c:type:`v4l2_h264_pred_weight_table`
-      - ``pred_weight_table``
-      -
-    * - __u32
-      - ``dec_ref_pic_marking_bit_size``
-      - Size in bits of the dec_ref_pic_marking() syntax element.
-    * - __u32
-      - ``pic_order_cnt_bit_size``
-      - Combined size in bits of the picture order count related syntax
-        elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
-        delta_pic_order_cnt0, and delta_pic_order_cnt1.
     * - __u8
       - ``cabac_init_idc``
       -
@@ -1830,9 +1798,9 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - ``num_ref_idx_l1_active_minus1``
       - If num_ref_idx_active_override_flag is not set, this field must be
         set to the value of num_ref_idx_l1_default_active_minus1.
-    * - __u32
-      - ``slice_group_change_cycle``
-      -
+    * - __u8
+      - ``reserved``
+      - Applications and drivers must set this to zero.
     * - struct :c:type:`v4l2_h264_reference`
       - ``ref_pic_list0[32]``
       - Reference picture list after applying the per-slice modifications
@@ -1854,17 +1822,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
-      - 0x00000001
-      -
-    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
-      - 0x00000002
-      -
     * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
-      - 0x00000004
+      - 0x00000001
       -
     * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
-      - 0x00000008
+      - 0x00000002
       -
 
 ``V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (struct)``
@@ -1990,12 +1952,44 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - __u16
       - ``nal_ref_idc``
       - NAL reference ID value coming from the NAL Unit header
+    * - __u16
+      - ``frame_num``
+      -
     * - __s32
       - ``top_field_order_cnt``
       - Picture Order Count for the coded top field
     * - __s32
       - ``bottom_field_order_cnt``
       - Picture Order Count for the coded bottom field
+    * - __u16
+      - ``idr_pic_id``
+      -
+    * - __u16
+      - ``pic_order_cnt_lsb``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt_bottom``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt0``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt1``
+      -
+    * - __u32
+      - ``dec_ref_pic_marking_bit_size``
+      - Size in bits of the dec_ref_pic_marking() syntax element.
+    * - __u32
+      - ``pic_order_cnt_bit_size``
+      - Combined size in bits of the picture order count related syntax
+        elements: pic_order_cnt_lsb, delta_pic_order_cnt_bottom,
+        delta_pic_order_cnt0, and delta_pic_order_cnt1.
+    * - __u32
+      - ``slice_group_change_cycle``
+      -
+    * - __u32
+      - ``reserved``
+      - Applications and drivers must set this to zero.
     * - __u32
       - ``flags``
       - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
@@ -2014,6 +2008,12 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
       - 0x00000001
       - That picture is an IDR picture
+    * - ``V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD``
+      - 0x00000004
+      -
 
 .. c:type:: v4l2_h264_dpb_entry
 
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index b9457789fa55..b846f5b089c9 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -1737,6 +1737,7 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 {
 	struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params;
 	struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header;
+	struct v4l2_ctrl_h264_slice_params *p_h264_slice_params;
 	struct v4l2_ctrl_h264_decode_params *p_h264_dec_params;
 	struct v4l2_ctrl_hevc_sps *p_hevc_sps;
 	struct v4l2_ctrl_hevc_pps *p_hevc_pps;
@@ -1798,7 +1799,12 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_H264_PPS:
 	case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
 	case V4L2_CTRL_TYPE_H264_PRED_WEIGHTS:
+		break;
+
 	case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
+		p_h264_slice_params = p;
+
+		zero_reserved(*p_h264_slice_params);
 		break;
 
 	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
@@ -1810,6 +1816,7 @@ static int std_validate_compound(const struct v4l2_ctrl *ctrl, u32 idx,
 
 			zero_reserved(*dpb_entry);
 		}
+		zero_reserved(*p_h264_dec_params);
 		break;
 
 	case V4L2_CTRL_TYPE_VP8_FRAME_HEADER:
diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c
index f4742408436b..5633a242520a 100644
--- a/drivers/media/v4l2-core/v4l2-h264.c
+++ b/drivers/media/v4l2-core/v4l2-h264.c
@@ -18,14 +18,12 @@
  *
  * @b: the builder context to initialize
  * @dec_params: decode parameters control
- * @slice_params: first slice parameters control
  * @sps: SPS control
  * @dpb: DPB to use when creating the reference list
  */
 void
 v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
 		const struct v4l2_ctrl_h264_decode_params *dec_params,
-		const struct v4l2_ctrl_h264_slice_params *slice_params,
 		const struct v4l2_ctrl_h264_sps *sps,
 		const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES])
 {
@@ -33,13 +31,13 @@ v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
 	unsigned int i;
 
 	max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
-	cur_frame_num = slice_params->frame_num;
+	cur_frame_num = dec_params->frame_num;
 
 	memset(b, 0, sizeof(*b));
-	if (!(slice_params->flags & V4L2_H264_SLICE_FLAG_FIELD_PIC))
+	if (!(dec_params->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC))
 		b->cur_pic_order_count = min(dec_params->bottom_field_order_cnt,
 					     dec_params->top_field_order_cnt);
-	else if (slice_params->flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+	else if (dec_params->flags & V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD)
 		b->cur_pic_order_count = dec_params->bottom_field_order_cnt;
 	else
 		b->cur_pic_order_count = dec_params->top_field_order_cnt;
diff --git a/drivers/staging/media/hantro/hantro_g1_h264_dec.c b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
index 424c648ce9fc..f9839e9c6da5 100644
--- a/drivers/staging/media/hantro/hantro_g1_h264_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
@@ -23,7 +23,6 @@ static void set_params(struct hantro_ctx *ctx)
 {
 	const struct hantro_h264_dec_ctrls *ctrls = &ctx->h264_dec.ctrls;
 	const struct v4l2_ctrl_h264_decode_params *dec_param = ctrls->decode;
-	const struct v4l2_ctrl_h264_slice_params *slices = ctrls->slices;
 	const struct v4l2_ctrl_h264_sps *sps = ctrls->sps;
 	const struct v4l2_ctrl_h264_pps *pps = ctrls->pps;
 	struct vb2_v4l2_buffer *src_buf = hantro_get_src_buf(ctx);
@@ -42,11 +41,11 @@ static void set_params(struct hantro_ctx *ctx)
 
 	if (!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY) &&
 	    (sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD ||
-	     slices[0].flags & V4L2_H264_SLICE_FLAG_FIELD_PIC))
+	     dec_param->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC))
 		reg |= G1_REG_DEC_CTRL0_PIC_INTERLACE_E;
-	if (slices[0].flags & V4L2_H264_SLICE_FLAG_FIELD_PIC)
+	if (dec_param->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC)
 		reg |= G1_REG_DEC_CTRL0_PIC_FIELDMODE_E;
-	if (!(slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD))
+	if (!(dec_param->flags & V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD))
 		reg |= G1_REG_DEC_CTRL0_PIC_TOPFIELD_E;
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL0);
 
@@ -75,7 +74,7 @@ static void set_params(struct hantro_ctx *ctx)
 
 	/* Decoder control register 4. */
 	reg = G1_REG_DEC_CTRL4_FRAMENUM_LEN(sps->log2_max_frame_num_minus4 + 4) |
-	      G1_REG_DEC_CTRL4_FRAMENUM(slices[0].frame_num) |
+	      G1_REG_DEC_CTRL4_FRAMENUM(dec_param->frame_num) |
 	      G1_REG_DEC_CTRL4_WEIGHT_BIPR_IDC(pps->weighted_bipred_idc);
 	if (pps->flags & V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE)
 		reg |= G1_REG_DEC_CTRL4_CABAC_E;
@@ -88,8 +87,8 @@ static void set_params(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL4);
 
 	/* Decoder control register 5. */
-	reg = G1_REG_DEC_CTRL5_REFPIC_MK_LEN(slices[0].dec_ref_pic_marking_bit_size) |
-	      G1_REG_DEC_CTRL5_IDR_PIC_ID(slices[0].idr_pic_id);
+	reg = G1_REG_DEC_CTRL5_REFPIC_MK_LEN(dec_param->dec_ref_pic_marking_bit_size) |
+	      G1_REG_DEC_CTRL5_IDR_PIC_ID(dec_param->idr_pic_id);
 	if (pps->flags & V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED)
 		reg |= G1_REG_DEC_CTRL5_CONST_INTRA_E;
 	if (pps->flags & V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT)
@@ -103,10 +102,10 @@ static void set_params(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL5);
 
 	/* Decoder control register 6. */
-	reg = G1_REG_DEC_CTRL6_PPS_ID(slices[0].pic_parameter_set_id) |
+	reg = G1_REG_DEC_CTRL6_PPS_ID(pps->pic_parameter_set_id) |
 	      G1_REG_DEC_CTRL6_REFIDX0_ACTIVE(pps->num_ref_idx_l0_default_active_minus1 + 1) |
 	      G1_REG_DEC_CTRL6_REFIDX1_ACTIVE(pps->num_ref_idx_l1_default_active_minus1 + 1) |
-	      G1_REG_DEC_CTRL6_POC_LENGTH(slices[0].pic_order_cnt_bit_size);
+	      G1_REG_DEC_CTRL6_POC_LENGTH(dec_param->pic_order_cnt_bit_size);
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL6);
 
 	/* Error concealment register. */
@@ -246,7 +245,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 	/* Destination (decoded frame) buffer. */
 	dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
 	/* Adjust dma addr to start at second line for bottom field */
-	if (ctrls->slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+	if (ctrls->decode->flags & V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD)
 		offset = ALIGN(ctx->src_fmt.width, MB_DIM);
 	vdpu_write_relaxed(vpu, dst_dma + offset, G1_REG_ADDR_DST);
 
@@ -265,7 +264,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 		 * DMV buffer is split in two for field encoded frames,
 		 * adjust offset for bottom field
 		 */
-		if (ctrls->slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+		if (ctrls->decode->flags & V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD)
 			offset += 32 * MB_WIDTH(ctx->src_fmt.width) *
 				  MB_HEIGHT(ctx->src_fmt.height);
 		vdpu_write_relaxed(vpu, dst_dma + offset, G1_REG_ADDR_DIR_MV);
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index 194d05848077..0cbe514dc79a 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -372,8 +372,7 @@ int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx)
 
 	/* Build the P/B{0,1} ref lists. */
 	v4l2_h264_init_reflist_builder(&reflist_builder, ctrls->decode,
-				       &ctrls->slices[0], ctrls->sps,
-				       ctx->h264_dec.dpb);
+				       ctrls->sps, ctx->h264_dec.dpb);
 	v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
 	v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
 				    h264_ctx->reflists.b1);
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index d1f2715f30ae..90f211839be2 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -730,7 +730,6 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 			    struct rkvdec_h264_run *run)
 {
 	const struct v4l2_ctrl_h264_decode_params *dec_params = run->decode_params;
-	const struct v4l2_ctrl_h264_slice_params *sl_params = &run->slices_params[0];
 	const struct v4l2_h264_dpb_entry *dpb = dec_params->dpb;
 	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
 	const struct v4l2_ctrl_h264_sps *sps = run->sps;
@@ -754,7 +753,7 @@ static void assemble_hw_rps(struct rkvdec_ctx *ctx,
 			continue;
 
 		if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM ||
-		    dpb[i].frame_num < sl_params->frame_num) {
+		    dpb[i].frame_num < dec_params->frame_num) {
 			p[i] = dpb[i].frame_num;
 			continue;
 		}
@@ -1094,8 +1093,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
 
 	/* Build the P/B{0,1} ref lists. */
 	v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
-				       &run.slices_params[0], run.sps,
-				       run.decode_params->dpb);
+				       run.sps, run.decode_params->dpb);
 	h264_ctx->reflists.num_valid = reflist_builder.num_valid;
 	v4l2_h264_build_p_ref_list(&reflist_builder, h264_ctx->reflists.p);
 	v4l2_h264_build_b_ref_lists(&reflist_builder, h264_ctx->reflists.b0,
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index 7d9bd5860a1b..c8f626fdd3dd 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -95,7 +95,6 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 {
 	struct cedrus_h264_sram_ref_pic pic_list[CEDRUS_H264_FRAME_NUM];
 	const struct v4l2_ctrl_h264_decode_params *decode = run->h264.decode_params;
-	const struct v4l2_ctrl_h264_slice_params *slice = run->h264.slice_params;
 	const struct v4l2_ctrl_h264_sps *sps = run->h264.sps;
 	struct vb2_queue *cap_q;
 	struct cedrus_buffer *output_buf;
@@ -144,7 +143,7 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 	output_buf = vb2_to_cedrus_buffer(&run->dst->vb2_buf);
 	output_buf->codec.h264.position = position;
 
-	if (slice->flags & V4L2_H264_SLICE_FLAG_FIELD_PIC)
+	if (decode->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC)
 		output_buf->codec.h264.pic_type = CEDRUS_H264_PIC_TYPE_FIELD;
 	else if (sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD)
 		output_buf->codec.h264.pic_type = CEDRUS_H264_PIC_TYPE_MBAFF;
@@ -407,7 +406,7 @@ static void cedrus_set_params(struct cedrus_ctx *ctx,
 		reg |= VE_H264_SPS_DIRECT_8X8_INFERENCE;
 	cedrus_write(dev, VE_H264_SPS, reg);
 
-	mbaff_pic = !(slice->flags & V4L2_H264_SLICE_FLAG_FIELD_PIC) &&
+	mbaff_pic = !(decode->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC) &&
 		    (sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD);
 	pic_width_in_mbs = sps->pic_width_in_mbs_minus1 + 1;
 
@@ -421,9 +420,9 @@ static void cedrus_set_params(struct cedrus_ctx *ctx,
 	reg |= slice->cabac_init_idc & 0x3;
 	if (ctx->fh.m2m_ctx->new_frame)
 		reg |= VE_H264_SHS_FIRST_SLICE_IN_PIC;
-	if (slice->flags & V4L2_H264_SLICE_FLAG_FIELD_PIC)
+	if (decode->flags & V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC)
 		reg |= VE_H264_SHS_FIELD_PIC;
-	if (slice->flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
+	if (decode->flags & V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD)
 		reg |= VE_H264_SHS_BOTTOM_FIELD;
 	if (slice->flags & V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED)
 		reg |= VE_H264_SHS_DIRECT_SPATIAL_MV_PRED;
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index e4cae02a765f..0c15ff938873 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -146,10 +146,8 @@ struct v4l2_ctrl_h264_pred_weights {
 #define V4L2_H264_SLICE_TYPE_SP				3
 #define V4L2_H264_SLICE_TYPE_SI				4
 
-#define V4L2_H264_SLICE_FLAG_FIELD_PIC			0x01
-#define V4L2_H264_SLICE_FLAG_BOTTOM_FIELD		0x02
-#define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED	0x04
-#define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH		0x08
+#define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED	0x01
+#define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH		0x02
 
 #define V4L2_H264_TOP_FIELD_REF				0x1
 #define V4L2_H264_BOTTOM_FIELD_REF			0x2
@@ -169,21 +167,8 @@ struct v4l2_ctrl_h264_slice_params {
 	__u32 first_mb_in_slice;
 
 	__u8 slice_type;
-	__u8 pic_parameter_set_id;
 	__u8 colour_plane_id;
 	__u8 redundant_pic_cnt;
-	__u16 frame_num;
-	__u16 idr_pic_id;
-	__u16 pic_order_cnt_lsb;
-	__s32 delta_pic_order_cnt_bottom;
-	__s32 delta_pic_order_cnt0;
-	__s32 delta_pic_order_cnt1;
-
-	/* Size in bits of dec_ref_pic_marking() syntax element. */
-	__u32 dec_ref_pic_marking_bit_size;
-	/* Size in bits of pic order count syntax. */
-	__u32 pic_order_cnt_bit_size;
-
 	__u8 cabac_init_idc;
 	__s8 slice_qp_delta;
 	__s8 slice_qs_delta;
@@ -192,7 +177,8 @@ struct v4l2_ctrl_h264_slice_params {
 	__s8 slice_beta_offset_div2;
 	__u8 num_ref_idx_l0_active_minus1;
 	__u8 num_ref_idx_l1_active_minus1;
-	__u32 slice_group_change_cycle;
+
+	__u8 reserved;
 
 	struct v4l2_h264_reference ref_pic_list0[V4L2_H264_REF_LIST_LEN];
 	struct v4l2_h264_reference ref_pic_list1[V4L2_H264_REF_LIST_LEN];
@@ -217,13 +203,28 @@ struct v4l2_h264_dpb_entry {
 	__u32 flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */
 };
 
-#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC	0x01
+#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC		0x01
+#define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC		0x02
+#define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD	0x04
 
 struct v4l2_ctrl_h264_decode_params {
 	struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES];
 	__u16 nal_ref_idc;
+	__u16 frame_num;
 	__s32 top_field_order_cnt;
 	__s32 bottom_field_order_cnt;
+	__u16 idr_pic_id;
+	__u16 pic_order_cnt_lsb;
+	__s32 delta_pic_order_cnt_bottom;
+	__s32 delta_pic_order_cnt0;
+	__s32 delta_pic_order_cnt1;
+	/* Size in bits of dec_ref_pic_marking() syntax element. */
+	__u32 dec_ref_pic_marking_bit_size;
+	/* Size in bits of pic order count syntax. */
+	__u32 pic_order_cnt_bit_size;
+	__u32 slice_group_change_cycle;
+
+	__u32 reserved;
 	__u32 flags; /* V4L2_H264_DECODE_PARAM_FLAG_* */
 };
 
diff --git a/include/media/v4l2-h264.h b/include/media/v4l2-h264.h
index 1a5f26fc2a9a..f08ba181263d 100644
--- a/include/media/v4l2-h264.h
+++ b/include/media/v4l2-h264.h
@@ -44,7 +44,6 @@ struct v4l2_h264_reflist_builder {
 void
 v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
 		const struct v4l2_ctrl_h264_decode_params *dec_params,
-		const struct v4l2_ctrl_h264_slice_params *slice_params,
 		const struct v4l2_ctrl_h264_sps *sps,
 		const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]);
 
-- 
2.27.0

[PATCH v4 11/19] media: uapi: h264: Rename and clarify PPS_FLAG_SCALING_MATRIX_PRESENT

[Ezequiel Garcia]

Applications are expected to fill V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX
if a non-flat scaling matrix applies to the picture. This is the case if
SPS scaling_matrix_present_flag or PPS pic_scaling_matrix_present_flag
are set, and should be handled by applications.

On one hand, the PPS bitstream syntax element signals the presence of a
Picture scaling matrix modifying the Sequence (SPS) scaling matrix.
On the other hand, our flag should indicate if the scaling matrix
V4L2 control is applicable to this request.

Rename the flag from PPS_FLAG_PIC_SCALING_MATRIX_PRESENT to
PPS_FLAG_SCALING_MATRIX_PRESENT, to avoid mixing this flag with
bitstream syntax element pic_scaling_matrix_present_flag,
and clarify the meaning of our flag.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 5 +++--
 include/media/h264-ctrls.h                                | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 4cd9fd9c5a89..e2b94b1d0ab0 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1695,9 +1695,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
     * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
       - 0x00000040
       -
-    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+    * - ``V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT``
       - 0x00000080
-      -
+      - Indicates that ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``
+        must be used for this picture.
 
 ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
     Specifies the scaling matrix (as extracted from the bitstream) for
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 0c15ff938873..ec4799154438 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -99,7 +99,7 @@ struct v4l2_ctrl_h264_sps {
 #define V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED			0x0010
 #define V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT			0x0020
 #define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE				0x0040
-#define V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT			0x0080
+#define V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT			0x0080
 
 struct v4l2_ctrl_h264_pps {
 	__u8 pic_parameter_set_id;
-- 
2.27.0

[PATCH v4 12/19] media: hantro: Don't require unneeded H264_SLICE_PARAMS

[Ezequiel Garcia]

Now that slice invariant parameters have been moved,
the driver no longer needs this control, so drop it.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 drivers/staging/media/hantro/hantro_drv.c  | 5 -----
 drivers/staging/media/hantro/hantro_h264.c | 5 -----
 drivers/staging/media/hantro/hantro_hw.h   | 2 --
 3 files changed, 12 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 34797507f214..3cd00cc0a364 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -306,11 +306,6 @@ static const struct hantro_ctrl controls[] = {
 		.cfg = {
 			.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS,
 		},
-	}, {
-		.codec = HANTRO_H264_DECODER,
-		.cfg = {
-			.id = V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS,
-		},
 	}, {
 		.codec = HANTRO_H264_DECODER,
 		.cfg = {
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index 0cbe514dc79a..6887318ed4d8 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -349,11 +349,6 @@ int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx)
 	if (WARN_ON(!ctrls->decode))
 		return -EINVAL;
 
-	ctrls->slices =
-		hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS);
-	if (WARN_ON(!ctrls->slices))
-		return -EINVAL;
-
 	ctrls->sps =
 		hantro_get_ctrl(ctx, V4L2_CID_MPEG_VIDEO_H264_SPS);
 	if (WARN_ON(!ctrls->sps))
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index f066de6b592d..219283a06f52 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -56,14 +56,12 @@ struct hantro_jpeg_enc_hw_ctx {
  * struct hantro_h264_dec_ctrls
  * @decode:	Decode params
  * @scaling:	Scaling info
- * @slice:	Slice params
  * @sps:	SPS info
  * @pps:	PPS info
  */
 struct hantro_h264_dec_ctrls {
 	const struct v4l2_ctrl_h264_decode_params *decode;
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling;
-	const struct v4l2_ctrl_h264_slice_params *slices;
 	const struct v4l2_ctrl_h264_sps *sps;
 	const struct v4l2_ctrl_h264_pps *pps;
 };
-- 
2.27.0

[PATCH v4 13/19] media: rkvdec: Don't require unneeded H264_SLICE_PARAMS

[Ezequiel Garcia]

Now that slice invariant parameters have been moved,
the driver no longer needs this control, so drop it.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v2:
* Fix wrongly removed SPS.
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 4 ----
 drivers/staging/media/rkvdec/rkvdec.c      | 5 -----
 2 files changed, 9 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 90f211839be2..c45cd1617b3b 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -109,7 +109,6 @@ struct rkvdec_h264_reflists {
 struct rkvdec_h264_run {
 	struct rkvdec_run base;
 	const struct v4l2_ctrl_h264_decode_params *decode_params;
-	const struct v4l2_ctrl_h264_slice_params *slices_params;
 	const struct v4l2_ctrl_h264_sps *sps;
 	const struct v4l2_ctrl_h264_pps *pps;
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling_matrix;
@@ -1066,9 +1065,6 @@ static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
 	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
 			      V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS);
 	run->decode_params = ctrl ? ctrl->p_cur.p : NULL;
-	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
-			      V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS);
-	run->slices_params = ctrl ? ctrl->p_cur.p : NULL;
 	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
 			      V4L2_CID_MPEG_VIDEO_H264_SPS);
 	run->sps = ctrl ? ctrl->p_cur.p : NULL;
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index c8151328fb70..7c5129593921 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -59,11 +59,6 @@ static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
 		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS,
 	},
-	{
-		.per_request = true,
-		.mandatory = true,
-		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS,
-	},
 	{
 		.per_request = true,
 		.mandatory = true,
-- 
2.27.0

[PATCH v4 14/19] media: cedrus: h264: Properly configure reference field

[Ezequiel Garcia]

From: Jernej Skrabec <jernej.skrabec@siol.net>

When interlaced H264 content is being decoded, references must indicate
which field is being referenced. Currently this was done by checking
capture buffer flags. However, that is not correct because capture
buffer may hold both fields.

Fix this by checking newly introduced flags in reference lists.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
---
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index c8f626fdd3dd..1e89a8438f36 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -182,7 +182,6 @@ static void _cedrus_write_ref_list(struct cedrus_ctx *ctx,
 	for (i = 0; i < num_ref; i++) {
 		const struct v4l2_h264_dpb_entry *dpb;
 		const struct cedrus_buffer *cedrus_buf;
-		const struct vb2_v4l2_buffer *ref_buf;
 		unsigned int position;
 		int buf_idx;
 		u8 dpb_idx;
@@ -197,12 +196,11 @@ static void _cedrus_write_ref_list(struct cedrus_ctx *ctx,
 		if (buf_idx < 0)
 			continue;
 
-		ref_buf = to_vb2_v4l2_buffer(cap_q->bufs[buf_idx]);
-		cedrus_buf = vb2_v4l2_to_cedrus_buffer(ref_buf);
+		cedrus_buf = vb2_to_cedrus_buffer(cap_q->bufs[buf_idx]);
 		position = cedrus_buf->codec.h264.position;
 
 		sram_array[i] |= position << 1;
-		if (ref_buf->field == V4L2_FIELD_BOTTOM)
+		if (ref_list[i].fields & V4L2_H264_BOTTOM_FIELD_REF)
 			sram_array[i] |= BIT(0);
 	}
 
-- 
2.27.0

[PATCH v4 15/19] media: cedrus: h264: Fix frame list construction

[Ezequiel Garcia]

From: Jernej Skrabec <jernej.skrabec@siol.net>

Current frame list construction algorithm assumes that decoded image
will be output into its own buffer. That is true for progressive content
but not for interlaced where each field is decoded separately into same
buffer.

Fix that by checking if capture buffer is listed in DPB. If it is, reuse
it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index 1e89a8438f36..fe041b444385 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -101,7 +101,7 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 	struct cedrus_dev *dev = ctx->dev;
 	unsigned long used_dpbs = 0;
 	unsigned int position;
-	unsigned int output = 0;
+	int output = -1;
 	unsigned int i;
 
 	cap_q = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
@@ -124,6 +124,11 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 		position = cedrus_buf->codec.h264.position;
 		used_dpbs |= BIT(position);
 
+		if (run->dst->vb2_buf.timestamp == dpb->reference_ts) {
+			output = position;
+			continue;
+		}
+
 		if (!(dpb->flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE))
 			continue;
 
@@ -131,13 +136,11 @@ static void cedrus_write_frame_list(struct cedrus_ctx *ctx,
 				    dpb->top_field_order_cnt,
 				    dpb->bottom_field_order_cnt,
 				    &pic_list[position]);
-
-		output = max(position, output);
 	}
 
-	position = find_next_zero_bit(&used_dpbs, CEDRUS_H264_FRAME_NUM,
-				      output);
-	if (position >= CEDRUS_H264_FRAME_NUM)
+	if (output >= 0)
+		position = output;
+	else
 		position = find_first_zero_bit(&used_dpbs, CEDRUS_H264_FRAME_NUM);
 
 	output_buf = vb2_to_cedrus_buffer(&run->dst->vb2_buf);
-- 
2.27.0

[PATCH v4 16/19] media: rkvdec: Drop unneeded per_request driver-specific control flag

[Ezequiel Garcia]

Currently, the drivers makes no distinction between per_request
and mandatory, as both are used in the same request validate check.

The driver only cares to know if a given control is
required to be part of a request, so only one flag is needed.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
v4:
* Drop 'mandatory' from DECODE_MODE and START_MODE.
---
 drivers/staging/media/rkvdec/rkvdec.c | 8 +-------
 drivers/staging/media/rkvdec/rkvdec.h | 1 -
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index 7c5129593921..9f59dfb62d3f 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -55,35 +55,29 @@ static const struct v4l2_ctrl_ops rkvdec_ctrl_ops = {
 
 static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
 	{
-		.per_request = true,
 		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS,
 	},
 	{
-		.per_request = true,
 		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SPS,
 		.cfg.ops = &rkvdec_ctrl_ops,
 	},
 	{
-		.per_request = true,
 		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_PPS,
 	},
 	{
-		.per_request = true,
 		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX,
 	},
 	{
-		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE,
 		.cfg.min = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
 		.cfg.max = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
 		.cfg.def = V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED,
 	},
 	{
-		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_START_CODE,
 		.cfg.min = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
 		.cfg.def = V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B,
@@ -615,7 +609,7 @@ static int rkvdec_request_validate(struct media_request *req)
 		u32 id = ctrls->ctrls[i].cfg.id;
 		struct v4l2_ctrl *ctrl;
 
-		if (!ctrls->ctrls[i].per_request || !ctrls->ctrls[i].mandatory)
+		if (!ctrls->ctrls[i].mandatory)
 			continue;
 
 		ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl, id);
diff --git a/drivers/staging/media/rkvdec/rkvdec.h b/drivers/staging/media/rkvdec/rkvdec.h
index 2fc9f46b6910..77a137cca88e 100644
--- a/drivers/staging/media/rkvdec/rkvdec.h
+++ b/drivers/staging/media/rkvdec/rkvdec.h
@@ -25,7 +25,6 @@
 struct rkvdec_ctx;
 
 struct rkvdec_ctrl_desc {
-	u32 per_request : 1;
 	u32 mandatory : 1;
 	struct v4l2_ctrl_config cfg;
 };
-- 
2.27.0

[PATCH v4 17/19] media: rkvdec: Use H264_SCALING_MATRIX only when required

[Ezequiel Garcia]

Baseline, Main and Extended profiles are specified to
not support a scaling matrix. Also, High profiles
can optionally specify a scaling matrix, using
SPS and PPS NAL units.

To meet this expectation, applications are required to
set the V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX control
and set the V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT
flag only when a scaling matrix is specified for a picture.

Implement this on rkvdec, which has hardware support for this
case.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 drivers/staging/media/rkvdec/rkvdec-h264.c | 10 +++++++---
 drivers/staging/media/rkvdec/rkvdec.c      |  1 -
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index c45cd1617b3b..7cc3b478a5f4 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -708,9 +708,9 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
 	WRITE_PPS(pps->second_chroma_qp_index_offset,
 		  SECOND_CHROMA_QP_INDEX_OFFSET);
 
-	/* always use the matrix sent from userspace */
-	WRITE_PPS(1, SCALING_LIST_ENABLE_FLAG);
-
+	WRITE_PPS(!!(pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT),
+		  SCALING_LIST_ENABLE_FLAG);
+	/* To be on the safe side, program the scaling matrix address */
 	scaling_distance = offsetof(struct rkvdec_h264_priv_tbl, scaling_list);
 	scaling_list_address = h264_ctx->priv_tbl.dma + scaling_distance;
 	WRITE_PPS(scaling_list_address, SCALING_LIST_ADDRESS);
@@ -792,9 +792,13 @@ static void assemble_hw_scaling_list(struct rkvdec_ctx *ctx,
 				     struct rkvdec_h264_run *run)
 {
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling = run->scaling_matrix;
+	const struct v4l2_ctrl_h264_pps *pps = run->pps;
 	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
 	struct rkvdec_h264_priv_tbl *tbl = h264_ctx->priv_tbl.cpu;
 
+	if (!(pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT))
+		return;
+
 	BUILD_BUG_ON(sizeof(tbl->scaling_list.scaling_list_4x4) !=
 		     sizeof(scaling->scaling_list_4x4));
 	BUILD_BUG_ON(sizeof(tbl->scaling_list.scaling_list_8x8) !=
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index 9f59dfb62d3f..d25c4a37e2af 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -68,7 +68,6 @@ static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_PPS,
 	},
 	{
-		.mandatory = true,
 		.cfg.id = V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX,
 	},
 	{
-- 
2.27.0

[PATCH v4 18/19] media: hantro: Use H264_SCALING_MATRIX only when required

[Ezequiel Garcia]

Baseline, Main and Extended profiles are specified to
not support a scaling matrix. Also, High profiles
can optionally specify a scaling matrix, using
SPS and PPS NAL units.

To meet this expectation, applications are required to
set the V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX control
and set the V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT
flag only when a scaling matrix is specified for a picture.

Implement this on hantro, which has hardware support for this
case.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
---
 drivers/staging/media/hantro/hantro_g1_h264_dec.c | 5 ++---
 drivers/staging/media/hantro/hantro_h264.c        | 4 ++++
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_g1_h264_dec.c b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
index f9839e9c6da5..845bef73d218 100644
--- a/drivers/staging/media/hantro/hantro_g1_h264_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
@@ -59,9 +59,8 @@ static void set_params(struct hantro_ctx *ctx)
 	reg = G1_REG_DEC_CTRL2_CH_QP_OFFSET(pps->chroma_qp_index_offset) |
 	      G1_REG_DEC_CTRL2_CH_QP_OFFSET2(pps->second_chroma_qp_index_offset);
 
-	/* always use the matrix sent from userspace */
-	reg |= G1_REG_DEC_CTRL2_TYPE1_QUANT_E;
-
+	if (pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT)
+		reg |= G1_REG_DEC_CTRL2_TYPE1_QUANT_E;
 	if (!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY))
 		reg |= G1_REG_DEC_CTRL2_FIELDPIC_FLAG_E;
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL2);
diff --git a/drivers/staging/media/hantro/hantro_h264.c b/drivers/staging/media/hantro/hantro_h264.c
index 6887318ed4d8..8af399c8d20e 100644
--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -197,6 +197,7 @@ assemble_scaling_list(struct hantro_ctx *ctx)
 {
 	const struct hantro_h264_dec_ctrls *ctrls = &ctx->h264_dec.ctrls;
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling = ctrls->scaling;
+	const struct v4l2_ctrl_h264_pps *pps = ctrls->pps;
 	const size_t num_list_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4);
 	const size_t list_len_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4[0]);
 	const size_t list_len_8x8 = ARRAY_SIZE(scaling->scaling_list_8x8[0]);
@@ -205,6 +206,9 @@ assemble_scaling_list(struct hantro_ctx *ctx)
 	const u32 *src;
 	int i, j;
 
+	if (!(pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT))
+		return;
+
 	for (i = 0; i < num_list_4x4; i++) {
 		src = (u32 *)&scaling->scaling_list_4x4[i];
 		for (j = 0; j < list_len_4x4 / 4; j++)
-- 
2.27.0

[PATCH v4 19/19] media: cedrus: Use H264_SCALING_MATRIX only when required

[Ezequiel Garcia]

Baseline, Main and Extended profiles are specified to
not support a scaling matrix. Also, High profiles
can optionally specify a scaling matrix, using
SPS and PPS NAL units.

To meet this expectation, applications are required to
set the V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX control
and set the V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT
flag only when a scaling matrix is specified for a picture.

Implement this on cedrus, which has hardware support for this
case.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
 drivers/staging/media/sunxi/cedrus/cedrus.c      | 2 +-
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 826324faad7e..6ebb39e0c0ce 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -76,7 +76,7 @@ static const struct cedrus_control cedrus_controls[] = {
 			.id	= V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX,
 		},
 		.codec		= CEDRUS_CODEC_H264,
-		.required	= true,
+		.required	= false,
 	},
 	{
 		.cfg = {
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index fe041b444385..28319351e909 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -238,8 +238,12 @@ static void cedrus_write_scaling_lists(struct cedrus_ctx *ctx,
 {
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling =
 		run->h264.scaling_matrix;
+	const struct v4l2_ctrl_h264_pps *pps = run->h264.pps;
 	struct cedrus_dev *dev = ctx->dev;
 
+	if (!(pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT))
+		return;
+
 	cedrus_h264_write_sram(dev, CEDRUS_SRAM_H264_SCALING_LIST_8x8_0,
 			       scaling->scaling_list_8x8[0],
 			       sizeof(scaling->scaling_list_8x8[0]));
@@ -442,6 +446,8 @@ static void cedrus_set_params(struct cedrus_ctx *ctx,
 	reg |= (pps->second_chroma_qp_index_offset & 0x3f) << 16;
 	reg |= (pps->chroma_qp_index_offset & 0x3f) << 8;
 	reg |= (pps->pic_init_qp_minus26 + 26 + slice->slice_qp_delta) & 0x3f;
+	if (pps->flags & V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT)
+		reg |= VE_H264_SHS_QP_SCALING_MATRIX_DEFAULT;
 	cedrus_write(dev, VE_H264_SHS_QP, reg);
 
 	// clear status flags
-- 
2.27.0