* [PATCH RFC] netlabel: remove unused param from audit_log_format() @ 2020-08-27 16:37 Alex Dewar 2020-08-27 17:00 ` Paul Moore 0 siblings, 1 reply; 8+ messages in thread From: Alex Dewar @ 2020-08-27 16:37 UTC (permalink / raw) Cc: Alex Dewar, Paul Moore, David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") added a check to return an error if ret_val != 0, before ret_val is later used in a log message. Now it will unconditionally print "... res=0". So don't print res anymore. Addresses-Coverity: ("Dead code") Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> --- I wasn't sure whether it was intended that something other than ret_val be printed in the log, so that's why I'm sending this as an RFC. net/netlabel/netlabel_domainhash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index f73a8382c275..526762b2f3a9 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); if (audit_buf != NULL) { audit_log_format(audit_buf, - " nlbl_domain=%s res=%u", - entry->domain ? entry->domain : "(default)", - ret_val == 0 ? 1 : 0); + " nlbl_domain=%s", + entry->domain ? entry->domain : "(default)"); audit_log_end(audit_buf); } -- 2.28.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH RFC] netlabel: remove unused param from audit_log_format() 2020-08-27 16:37 [PATCH RFC] netlabel: remove unused param from audit_log_format() Alex Dewar @ 2020-08-27 17:00 ` Paul Moore 2020-08-27 17:06 ` Alex Dewar 0 siblings, 1 reply; 8+ messages in thread From: Paul Moore @ 2020-08-27 17:00 UTC (permalink / raw) To: Alex Dewar Cc: David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel On Thu, Aug 27, 2020 at 12:39 PM Alex Dewar <alex.dewar90@gmail.com> wrote: > > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > added a check to return an error if ret_val != 0, before ret_val is > later used in a log message. Now it will unconditionally print "... > res=0". So don't print res anymore. > > Addresses-Coverity: ("Dead code") > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > --- > > I wasn't sure whether it was intended that something other than ret_val > be printed in the log, so that's why I'm sending this as an RFC. It's intentional for a couple of reasons: * The people who care about audit logs like to see success/fail (e.g. "res=X") for audit events/records, so printing this out gives them the warm fuzzies. * For a lot of awful reasons that I won't bore you with, we really don't want to add/remove fields in the middle of an audit record so we pretty much need to keep the "res=0" there even if it seems a bit redundant. So NACK from me, but thanks for paying attention just the same :) > net/netlabel/netlabel_domainhash.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c > index f73a8382c275..526762b2f3a9 100644 > --- a/net/netlabel/netlabel_domainhash.c > +++ b/net/netlabel/netlabel_domainhash.c > @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, > audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); > if (audit_buf != NULL) { > audit_log_format(audit_buf, > - " nlbl_domain=%s res=%u", > - entry->domain ? entry->domain : "(default)", > - ret_val == 0 ? 1 : 0); > + " nlbl_domain=%s", > + entry->domain ? entry->domain : "(default)"); > audit_log_end(audit_buf); > } > -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH RFC] netlabel: remove unused param from audit_log_format() 2020-08-27 17:00 ` Paul Moore @ 2020-08-27 17:06 ` Alex Dewar 2020-08-27 17:20 ` Alex Dewar 0 siblings, 1 reply; 8+ messages in thread From: Alex Dewar @ 2020-08-27 17:06 UTC (permalink / raw) To: Paul Moore Cc: Alex Dewar, David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel On Thu, Aug 27, 2020 at 01:00:58PM -0400, Paul Moore wrote: > On Thu, Aug 27, 2020 at 12:39 PM Alex Dewar <alex.dewar90@gmail.com> wrote: > > > > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > > added a check to return an error if ret_val != 0, before ret_val is > > later used in a log message. Now it will unconditionally print "... > > res=0". So don't print res anymore. > > > > Addresses-Coverity: ("Dead code") > > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > > --- > > > > I wasn't sure whether it was intended that something other than ret_val > > be printed in the log, so that's why I'm sending this as an RFC. > > It's intentional for a couple of reasons: > > * The people who care about audit logs like to see success/fail (e.g. > "res=X") for audit events/records, so printing this out gives them the > warm fuzzies. > > * For a lot of awful reasons that I won't bore you with, we really > don't want to add/remove fields in the middle of an audit record so we > pretty much need to keep the "res=0" there even if it seems a bit > redundant. > > So NACK from me, but thanks for paying attention just the same :) Would you rather just have an explicit "res=0" in there, without looking at ret_val? The thing is that ret_val will *always* be zero at this point in the code, because, if not, the function will already have returned. That's why Coverity flagged it up as a redundant check. > > > net/netlabel/netlabel_domainhash.c | 5 ++--- > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c > > index f73a8382c275..526762b2f3a9 100644 > > --- a/net/netlabel/netlabel_domainhash.c > > +++ b/net/netlabel/netlabel_domainhash.c > > @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, > > audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); > > if (audit_buf != NULL) { > > audit_log_format(audit_buf, > > - " nlbl_domain=%s res=%u", > > - entry->domain ? entry->domain : "(default)", > > - ret_val == 0 ? 1 : 0); > > + " nlbl_domain=%s", > > + entry->domain ? entry->domain : "(default)"); > > audit_log_end(audit_buf); > > } > > > > -- > paul moore > www.paul-moore.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH RFC] netlabel: remove unused param from audit_log_format() 2020-08-27 17:06 ` Alex Dewar @ 2020-08-27 17:20 ` Alex Dewar 2020-08-27 20:10 ` Paul Moore 0 siblings, 1 reply; 8+ messages in thread From: Alex Dewar @ 2020-08-27 17:20 UTC (permalink / raw) To: Alex Dewar Cc: Paul Moore, David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel On Thu, Aug 27, 2020 at 06:06:34PM +0100, Alex Dewar wrote: > On Thu, Aug 27, 2020 at 01:00:58PM -0400, Paul Moore wrote: > > On Thu, Aug 27, 2020 at 12:39 PM Alex Dewar <alex.dewar90@gmail.com> wrote: > > > > > > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > > > added a check to return an error if ret_val != 0, before ret_val is > > > later used in a log message. Now it will unconditionally print "... > > > res=0". So don't print res anymore. > > > > > > Addresses-Coverity: ("Dead code") > > > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > > > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > > > --- > > > > > > I wasn't sure whether it was intended that something other than ret_val > > > be printed in the log, so that's why I'm sending this as an RFC. > > > > It's intentional for a couple of reasons: > > > > * The people who care about audit logs like to see success/fail (e.g. > > "res=X") for audit events/records, so printing this out gives them the > > warm fuzzies. > > > > * For a lot of awful reasons that I won't bore you with, we really > > don't want to add/remove fields in the middle of an audit record so we > > pretty much need to keep the "res=0" there even if it seems a bit > > redundant. > > > > So NACK from me, but thanks for paying attention just the same :) > > Would you rather just have an explicit "res=0" in there, without looking > at ret_val? The thing is that ret_val will *always* be zero at this point in > the code, because, if not, the function will already have returned. > That's why Coverity flagged it up as a redundant check. Sorry, I meant "res=1". The code will always print res=1, because ret_val is always 0. > > > > > > net/netlabel/netlabel_domainhash.c | 5 ++--- > > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > > > diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c > > > index f73a8382c275..526762b2f3a9 100644 > > > --- a/net/netlabel/netlabel_domainhash.c > > > +++ b/net/netlabel/netlabel_domainhash.c > > > @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, > > > audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); > > > if (audit_buf != NULL) { > > > audit_log_format(audit_buf, > > > - " nlbl_domain=%s res=%u", > > > - entry->domain ? entry->domain : "(default)", > > > - ret_val == 0 ? 1 : 0); > > > + " nlbl_domain=%s", > > > + entry->domain ? entry->domain : "(default)"); > > > audit_log_end(audit_buf); > > > } > > > > > > > -- > > paul moore > > www.paul-moore.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH RFC] netlabel: remove unused param from audit_log_format() 2020-08-27 17:20 ` Alex Dewar @ 2020-08-27 20:10 ` Paul Moore 2020-08-28 13:55 ` [PATCH v2] " Alex Dewar 0 siblings, 1 reply; 8+ messages in thread From: Paul Moore @ 2020-08-27 20:10 UTC (permalink / raw) To: Alex Dewar Cc: David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel On Thu, Aug 27, 2020 at 1:20 PM Alex Dewar <alex.dewar90@gmail.com> wrote: > On Thu, Aug 27, 2020 at 06:06:34PM +0100, Alex Dewar wrote: > > On Thu, Aug 27, 2020 at 01:00:58PM -0400, Paul Moore wrote: > > > On Thu, Aug 27, 2020 at 12:39 PM Alex Dewar <alex.dewar90@gmail.com> wrote: > > > > > > > > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > > > > added a check to return an error if ret_val != 0, before ret_val is > > > > later used in a log message. Now it will unconditionally print "... > > > > res=0". So don't print res anymore. > > > > > > > > Addresses-Coverity: ("Dead code") > > > > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > > > > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > > > > --- > > > > > > > > I wasn't sure whether it was intended that something other than ret_val > > > > be printed in the log, so that's why I'm sending this as an RFC. > > > > > > It's intentional for a couple of reasons: > > > > > > * The people who care about audit logs like to see success/fail (e.g. > > > "res=X") for audit events/records, so printing this out gives them the > > > warm fuzzies. > > > > > > * For a lot of awful reasons that I won't bore you with, we really > > > don't want to add/remove fields in the middle of an audit record so we > > > pretty much need to keep the "res=0" there even if it seems a bit > > > redundant. > > > > > > So NACK from me, but thanks for paying attention just the same :) > > > > Would you rather just have an explicit "res=0" in there, without looking > > at ret_val? The thing is that ret_val will *always* be zero at this point in > > the code, because, if not, the function will already have returned. > > That's why Coverity flagged it up as a redundant check. > > Sorry, I meant "res=1". The code will always print res=1, because > ret_val is always 0. That's okay, I can't tell you how many times I've made that mistake with "res=" :) Anyway, yes at that point ret_val should always be 0, and "res=X" should always be "res=1", so if you wanted to change it to a fixed value so you could get rid of the ternary statement that would be okay. > > > > net/netlabel/netlabel_domainhash.c | 5 ++--- > > > > 1 file changed, 2 insertions(+), 3 deletions(-) > > > > > > > > diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c > > > > index f73a8382c275..526762b2f3a9 100644 > > > > --- a/net/netlabel/netlabel_domainhash.c > > > > +++ b/net/netlabel/netlabel_domainhash.c > > > > @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, > > > > audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); > > > > if (audit_buf != NULL) { > > > > audit_log_format(audit_buf, > > > > - " nlbl_domain=%s res=%u", > > > > - entry->domain ? entry->domain : "(default)", > > > > - ret_val == 0 ? 1 : 0); > > > > + " nlbl_domain=%s", > > > > + entry->domain ? entry->domain : "(default)"); > > > > audit_log_end(audit_buf); > > > > } > > > > -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] netlabel: remove unused param from audit_log_format() 2020-08-27 20:10 ` Paul Moore @ 2020-08-28 13:55 ` Alex Dewar 2020-08-28 14:35 ` Paul Moore 2020-08-28 16:09 ` David Miller 0 siblings, 2 replies; 8+ messages in thread From: Alex Dewar @ 2020-08-28 13:55 UTC (permalink / raw) Cc: Alex Dewar, Paul Moore, David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") added a check to return an error if ret_val != 0, before ret_val is later used in a log message. Now it will unconditionally print "... res=1". So just drop the check. Addresses-Coverity: ("Dead code") Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> --- v2: Still print the res field, because it's useful (Paul) net/netlabel/netlabel_domainhash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index f73a8382c275e..dc8c39f51f7d3 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); if (audit_buf != NULL) { audit_log_format(audit_buf, - " nlbl_domain=%s res=%u", - entry->domain ? entry->domain : "(default)", - ret_val == 0 ? 1 : 0); + " nlbl_domain=%s res=1", + entry->domain ? entry->domain : "(default)"); audit_log_end(audit_buf); } -- 2.28.0 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2] netlabel: remove unused param from audit_log_format() 2020-08-28 13:55 ` [PATCH v2] " Alex Dewar @ 2020-08-28 14:35 ` Paul Moore 2020-08-28 16:09 ` David Miller 1 sibling, 0 replies; 8+ messages in thread From: Paul Moore @ 2020-08-28 14:35 UTC (permalink / raw) To: Alex Dewar Cc: David S. Miller, Jakub Kicinski, netdev, linux-security-module, linux-kernel On Fri, Aug 28, 2020 at 9:56 AM Alex Dewar <alex.dewar90@gmail.com> wrote: > > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > added a check to return an error if ret_val != 0, before ret_val is > later used in a log message. Now it will unconditionally print "... > res=1". So just drop the check. > > Addresses-Coverity: ("Dead code") > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > --- > v2: Still print the res field, because it's useful (Paul) > > net/netlabel/netlabel_domainhash.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) Thanks Alex. Acked-by: Paul Moore <paul@paul-moore.com> > diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c > index f73a8382c275e..dc8c39f51f7d3 100644 > --- a/net/netlabel/netlabel_domainhash.c > +++ b/net/netlabel/netlabel_domainhash.c > @@ -612,9 +612,8 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry, > audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); > if (audit_buf != NULL) { > audit_log_format(audit_buf, > - " nlbl_domain=%s res=%u", > - entry->domain ? entry->domain : "(default)", > - ret_val == 0 ? 1 : 0); > + " nlbl_domain=%s res=1", > + entry->domain ? entry->domain : "(default)"); > audit_log_end(audit_buf); > } > > -- > 2.28.0 > -- paul moore www.paul-moore.com ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] netlabel: remove unused param from audit_log_format() 2020-08-28 13:55 ` [PATCH v2] " Alex Dewar 2020-08-28 14:35 ` Paul Moore @ 2020-08-28 16:09 ` David Miller 1 sibling, 0 replies; 8+ messages in thread From: David Miller @ 2020-08-28 16:09 UTC (permalink / raw) To: alex.dewar90; +Cc: paul, kuba, netdev, linux-security-module, linux-kernel From: Alex Dewar <alex.dewar90@gmail.com> Date: Fri, 28 Aug 2020 14:55:23 +0100 > Commit d3b990b7f327 ("netlabel: fix problems with mapping removal") > added a check to return an error if ret_val != 0, before ret_val is > later used in a log message. Now it will unconditionally print "... > res=1". So just drop the check. > > Addresses-Coverity: ("Dead code") > Fixes: d3b990b7f327 ("netlabel: fix problems with mapping removal") > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> > --- > v2: Still print the res field, because it's useful (Paul) Applied to net-next, thank you. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-08-28 16:09 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-27 16:37 [PATCH RFC] netlabel: remove unused param from audit_log_format() Alex Dewar 2020-08-27 17:00 ` Paul Moore 2020-08-27 17:06 ` Alex Dewar 2020-08-27 17:20 ` Alex Dewar 2020-08-27 20:10 ` Paul Moore 2020-08-28 13:55 ` [PATCH v2] " Alex Dewar 2020-08-28 14:35 ` Paul Moore 2020-08-28 16:09 ` David Miller
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).