[PATCH v7 00/10] Add MMC and DMA support for Actions S700

[PATCH v7 00/10] Add MMC and DMA support for Actions S700

[Amit Singh Tomar]

This Series(v7) brought back the uSD regulator to model it correctly
in DT, and for that patch 10/10 has changed.

------------------------------------------------------------------

Series(v6) addressed the review comments from Rob and Mani,
changes are made in patch 01/10 and 10/10.

Rob's bot reported an error for patch 01/10, and now it has been
fixed by adjusting the reg property in example section.

For patch 10/10 unnecessary regulators are removed as suggested by
Mani. 

Serie is rebased on top of:
https://github.com/torvalds/linux/commit/6a70f89cc58f2368efa055cbcbd8b37384f6c588

--------------------------------------------------------------------

Series(v5) addressed the review comments provided by Vinod, and
patch 05/10 is moved to 01/10 so that documentation patch comes before
driver.

Apart from it, changes are made in patch 03/10(earlier it was 02/10)
to replace of_match_device() with of_device_get_match_data() and
removed uintptr_t from type-cast.

This Series is rebased on top of 5.8.0-rc3.

---------------------------------------------------------------------

Series(v4) addressed the review comments provided by Mani, and
there are changes in patch 1/10, 2/10 and 6/10 for it.

For first couple of patches , old comments are preserved and more
details about how DMA descriptors fields are programmed is added.

Apart from it, Typo is fixed patch 6/10 and placed the header file
in alphabetical order.

Also, this series fixes one compilation warning (reported by Kbuild)
introduced by patch 2/10 using clang compiler.
------------------------------------------------------------------------

Series(v3) addressed the review comments provided by Rob, and 
there are changes in patch 5/10 for it.

Also, one of the important change for this series(v3) is about the way we 
we handle address range conflict between pinctrl and sps node.

In the last Series(v2), patch 4/10 was sent as *do not merge* but while
discussing about some proper solution for it, we have come up with
idea of limiting pinctrl address range(to 0x100) to avoid this conflict.
This is safe to do as current pinctrl driver uses address range only
up to 0x100 (even less than that?), and this would let sps to work properly.

Since sps block is now enabled , we have to provide power-domain bit
for dma to work properly and patch 6/10 has that change now.

Looking forward have some comments for this series.

---------------------------------------------------------------------------

Series(v2) addressed the review comments provided by Andre, and
there are changes in patch 1/10, 2/10, 5/10 and 9/10.

* Accessor function (to get the frame lenght) has moved from
  patch 2/9 to patch 1/9 with inline removed.
* Removed the unnecessary line break.
* Added comments about the way DMA descriptor differs between S700
  and S900.
* Added a macro to define fcnt value.
* Updated dma DT bindings.
* Used SoC secific compatible string for MMC.

Apart from it, a new patch 8/10 is added in this series to
update mmc DT bindings.

Series is rebased on 5.7.0-rc6.

-----------------------------------------------------------------------------

Series(v1) have following changes from the previous series.

New patch(5/8) has been introduced that converts dma dt-binding
for Actions OWL SoC from text format to yaml file.

For patch(2/8) new accessor function is added to get the frame
lenght which is common to both S900 and S700. Apart from it
SoC check is removed from irq routine as it is not needed.

Patch(4/8) which is an hack to prove our DMA and MMC works
for S700 is now sent as *do not merge* patch.
 
DMA is tested using dmatest with follwoing result:

root@ubuntu:~# echo dma0chan1 > /sys/module/dmatest/parameters/channel
root@ubuntu:~# echo 2000 > /sys/module/dmatest/parameters/timeout
root@ubuntu:~# echo 1 > /sys/module/dmatest/parameters/iterations
root@ubuntu:~# echo 1 > /sys/module/dmatest/parameters/run

root@ubuntu:~# dmesg | tail
[  303.362586] dmatest: Added 1 threads using dma0chan1
[  317.258658] dmatest: Started 1 threads using dma0chan1
[  317.259397] dmatest: dma0chan1-copy0: summary 1 tests, 0 failures 16129.03 iops 32258 KB/s (0)

-------------------------------------------------------------------------------

The intention of RFC series is to enable uSD and DMA support for
Cubieboard7 based on Actions S700 SoC, and on the way we found that
it requires changes in dmaengine present on S700 as its different
from what is present on S900.

Patch(1/8) does provide a new way to describe DMA descriptor, idea is
to remove the bit-fields as its less maintainable. It is only build
tested and it would be great if this can be tested on S900 based
hardware.

Patch(2/8) adds S700 DMA engine support, there is new compatible
string added for it, which means a changed bindings needed to submitted
for this. I would plan to send it later the converted "owl-dma.yaml".

Patch(4/8) disables the sps node as its memory range is conflicting
pinctrl node and results in pinctrl proble failure.

Rest of patches in the series adds DMA/MMC nodes for S700
alone with binding constants and enables the uSD for Cubieboard7.

This whole series is tested, by building/compiling Kernel on
Cubieboard7-lite which was *almost* successful (OOM kicked in,
while Linking due to less RAM present on hardware).

Following is the mmc speed :

ubuntu@ubuntu:~$ sudo hdparm -tT /dev/mmcblk0

/dev/mmcblk0:
 Timing cached reads:   1310 MB in  2.00 seconds = 655.15 MB/sec
 Timing buffered disk reads:  62 MB in  3.05 seconds =  20.30 MB/sec

Amit Singh Tomar (10):
  dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
  dmaengine: Actions: get rid of bit fields from dma descriptor
  dmaengine: Actions: Add support for S700 DMA engine
  clk: actions: Add MMC clock-register reset bits
  arm64: dts: actions: limit address range for pinctrl node
  arm64: dts: actions: Add DMA Controller for S700
  dt-bindings: reset: s700: Add binding constants for mmc
  dt-bindings: mmc: owl: add compatible string actions,s700-mmc
  arm64: dts: actions: Add MMC controller support for S700
  arm64: dts: actions: Add uSD support for Cubieboard7

 Documentation/devicetree/bindings/dma/owl-dma.txt  |  47 -------
 Documentation/devicetree/bindings/dma/owl-dma.yaml |  79 ++++++++++++
 Documentation/devicetree/bindings/mmc/owl-mmc.yaml |   6 +-
 arch/arm64/boot/dts/actions/s700-cubieboard7.dts   |  33 +++++
 arch/arm64/boot/dts/actions/s700.dtsi              |  51 +++++++-
 drivers/clk/actions/owl-s700.c                     |   3 +
 drivers/dma/owl-dma.c                              | 139 +++++++++++++--------
 include/dt-bindings/reset/actions,s700-reset.h     |   3 +
 8 files changed, 263 insertions(+), 98 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml

-- 
2.7.4

[PATCH v7 01/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml

[Amit Singh Tomar]

Converts the device tree bindings for the Actions Semi Owl SoCs DMA
Controller over to YAML schemas.

It also adds new compatible string "actions,s700-dma".

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Removed Rob's Reviewed-by tag as his bot found errors
          running 'make dt_binding_check'.
        * Fixed the errore reported by Rob's bot, adjusting the reg
          property in example.
Changes since v4:
        * Added Rob's Reviewed-by tag.
        * Re-order it from 05/10 to 01/10.
Changes since v3:
        * No change.
Changes since v2:
        * Addressed Rob's comments:
           - removed unnecessary description.
           - added unevaluatedProperties
           - added relevant information about
             dma-channels and dma-request
        * Added power-domain property.
Change since v1:
        * Updated the description field to reflect
          only the necessary information.
        * replaced the maxItems field with description for each
          controller attribute(except interrupts).
        * Replaced the clock macro with number to keep the example
          as independent as possible.
---
 Documentation/devicetree/bindings/dma/owl-dma.txt  | 47 -------------
 Documentation/devicetree/bindings/dma/owl-dma.yaml | 79 ++++++++++++++++++++++
 2 files changed, 79 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml

diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
deleted file mode 100644
index 03e9bb12b75f..000000000000
--- a/Documentation/devicetree/bindings/dma/owl-dma.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Actions Semi Owl SoCs DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "actions,s900-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain 4 interrupts shared by all channel.
-- #dma-cells: Must be <1>. Used to represent the number of integer
-              cells in the dmas property of client device.
-- dma-channels: Physical channels supported.
-- dma-requests: Number of DMA request signals supported by the controller.
-                Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks: Phandle and Specifier of the clock feeding the DMA controller.
-
-Example:
-
-Controller:
-                dma: dma-controller@e0260000 {
-                        compatible = "actions,s900-dma";
-                        reg = <0x0 0xe0260000 0x0 0x1000>;
-                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-                        #dma-cells = <1>;
-                        dma-channels = <12>;
-                        dma-requests = <46>;
-                        clocks = <&clock CLK_DMAC>;
-                };
-
-Client:
-
-DMA clients connected to the Actions Semi Owl SoCs DMA controller must
-use the format described in the dma.txt file, using a two-cell specifier
-for each channel.
-
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The channel id.
-
-uart5: serial@e012a000 {
-        ...
-        dma-names = "tx", "rx";
-        dmas = <&dma 26>, <&dma 27>;
-        ...
-};
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 000000000000..256d62af2c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+  The OWL DMA is a general-purpose direct memory access controller capable of
+  supporting 10 and 12 independent DMA channels for S700 and S900 SoCs
+  respectively.
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - actions,s900-dma
+      - actions,s700-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      controller supports 4 interrupts, which are freely assignable to the
+      DMA channels.
+    maxItems: 4
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    maximum: 12
+
+  dma-requests:
+    maximum: 46
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle and Specifier of the clock feeding the DMA controller.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+  - dma-requests
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    dma: dma-controller@e0260000 {
+        compatible = "actions,s900-dma";
+        reg = <0xe0260000 0x1000>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        dma-channels = <12>;
+        dma-requests = <46>;
+        clocks = <&clock 22>;
+    };
+
+...
-- 
2.7.4

[PATCH v7 02/10] dmaengine: Actions: get rid of bit fields from dma descriptor

[Amit Singh Tomar]

At the moment, Driver uses bit fields to describe registers of the DMA
descriptor structure that makes it less portable and maintainable, and
Andre suugested(and even sketched important bits for it) to make use of
array to describe this DMA descriptors instead. It gives the flexibility
while extending support for other platform such as Actions S700.

This commit removes the "owl_dma_lli_hw" (that includes bit-fields) and
uses array to describe DMA descriptor.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * Reordered it from 01/10 to 02/10.
Changes since v3:
        * Added description for enum fields.
        * Restored the old comment.
        * Added detailed comment about, the way FLEN
          and FCNT values are filled.
Changes since v2:
        * No change.
Changes since v1:
        * Defined macro for frame count value.
        * Introduced llc_hw_flen() from patch 2/9.
        * Removed the unnecessary line break.
Changes since rfc:
        * No change.
---
 drivers/dma/owl-dma.c | 98 +++++++++++++++++++++++++++++----------------------
 1 file changed, 56 insertions(+), 42 deletions(-)

diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
index 66ef70b00ec0..948d1bead860 100644
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -120,30 +120,33 @@
 #define BIT_FIELD(val, width, shift, newshift)	\
 		((((val) >> (shift)) & ((BIT(width)) - 1)) << (newshift))
 
+/* Frame count value is fixed as 1 */
+#define FCNT_VAL				0x1
+
 /**
- * struct owl_dma_lli_hw - Hardware link list for dma transfer
- * @next_lli: physical address of the next link list
- * @saddr: source physical address
- * @daddr: destination physical address
- * @flen: frame length
- * @fcnt: frame count
- * @src_stride: source stride
- * @dst_stride: destination stride
- * @ctrla: dma_mode and linklist ctrl config
- * @ctrlb: interrupt config
- * @const_num: data for constant fill
+ * owl_dmadesc_offsets - Describe DMA descriptor, hardware link
+ * list for dma transfer
+ * @OWL_DMADESC_NEXT_LLI: physical address of the next link list
+ * @OWL_DMADESC_SADDR: source physical address
+ * @OWL_DMADESC_DADDR: destination physical address
+ * @OWL_DMADESC_FLEN: frame length
+ * @OWL_DMADESC_SRC_STRIDE: source stride
+ * @OWL_DMADESC_DST_STRIDE: destination stride
+ * @OWL_DMADESC_CTRLA: dma_mode and linklist ctrl config
+ * @OWL_DMADESC_CTRLB: interrupt config
+ * @OWL_DMADESC_CONST_NUM: data for constant fill
  */
-struct owl_dma_lli_hw {
-	u32	next_lli;
-	u32	saddr;
-	u32	daddr;
-	u32	flen:20;
-	u32	fcnt:12;
-	u32	src_stride;
-	u32	dst_stride;
-	u32	ctrla;
-	u32	ctrlb;
-	u32	const_num;
+enum owl_dmadesc_offsets {
+	OWL_DMADESC_NEXT_LLI = 0,
+	OWL_DMADESC_SADDR,
+	OWL_DMADESC_DADDR,
+	OWL_DMADESC_FLEN,
+	OWL_DMADESC_SRC_STRIDE,
+	OWL_DMADESC_DST_STRIDE,
+	OWL_DMADESC_CTRLA,
+	OWL_DMADESC_CTRLB,
+	OWL_DMADESC_CONST_NUM,
+	OWL_DMADESC_SIZE
 };
 
 /**
@@ -153,7 +156,7 @@ struct owl_dma_lli_hw {
  * @node: node for txd's lli_list
  */
 struct owl_dma_lli {
-	struct  owl_dma_lli_hw	hw;
+	u32			hw[OWL_DMADESC_SIZE];
 	dma_addr_t		phys;
 	struct list_head	node;
 };
@@ -318,6 +321,11 @@ static inline u32 llc_hw_ctrlb(u32 int_ctl)
 	return ctl;
 }
 
+static u32 llc_hw_flen(struct owl_dma_lli *lli)
+{
+	return lli->hw[OWL_DMADESC_FLEN] & GENMASK(19, 0);
+}
+
 static void owl_dma_free_lli(struct owl_dma *od,
 			     struct owl_dma_lli *lli)
 {
@@ -349,8 +357,9 @@ static struct owl_dma_lli *owl_dma_add_lli(struct owl_dma_txd *txd,
 		list_add_tail(&next->node, &txd->lli_list);
 
 	if (prev) {
-		prev->hw.next_lli = next->phys;
-		prev->hw.ctrla |= llc_hw_ctrla(OWL_DMA_MODE_LME, 0);
+		prev->hw[OWL_DMADESC_NEXT_LLI] = next->phys;
+		prev->hw[OWL_DMADESC_CTRLA] |=
+					llc_hw_ctrla(OWL_DMA_MODE_LME, 0);
 	}
 
 	return next;
@@ -363,8 +372,7 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 				  struct dma_slave_config *sconfig,
 				  bool is_cyclic)
 {
-	struct owl_dma_lli_hw *hw = &lli->hw;
-	u32 mode;
+	u32 mode, ctrlb;
 
 	mode = OWL_DMA_MODE_PW(0);
 
@@ -405,22 +413,28 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 		return -EINVAL;
 	}
 
-	hw->next_lli = 0; /* One link list by default */
-	hw->saddr = src;
-	hw->daddr = dst;
-
-	hw->fcnt = 1; /* Frame count fixed as 1 */
-	hw->flen = len; /* Max frame length is 1MB */
-	hw->src_stride = 0;
-	hw->dst_stride = 0;
-	hw->ctrla = llc_hw_ctrla(mode,
-				 OWL_DMA_LLC_SAV_LOAD_NEXT |
-				 OWL_DMA_LLC_DAV_LOAD_NEXT);
+	lli->hw[OWL_DMADESC_CTRLA] = llc_hw_ctrla(mode,
+						  OWL_DMA_LLC_SAV_LOAD_NEXT |
+						  OWL_DMA_LLC_DAV_LOAD_NEXT);
 
 	if (is_cyclic)
-		hw->ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_BLOCK);
+		ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_BLOCK);
 	else
-		hw->ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_SUPER_BLOCK);
+		ctrlb = llc_hw_ctrlb(OWL_DMA_INTCTL_SUPER_BLOCK);
+
+	lli->hw[OWL_DMADESC_NEXT_LLI] = 0; /* One link list by default */
+	lli->hw[OWL_DMADESC_SADDR] = src;
+	lli->hw[OWL_DMADESC_DADDR] = dst;
+	lli->hw[OWL_DMADESC_SRC_STRIDE] = 0;
+	lli->hw[OWL_DMADESC_DST_STRIDE] = 0;
+	/*
+	 * Word starts from offset 0xC is shared between frame length
+	 * (max frame length is 1MB) and frame count, where first 20
+	 * bits are for frame length and rest of 12 bits are for frame
+	 * count.
+	 */
+	lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
+	lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
 
 	return 0;
 }
@@ -752,7 +766,7 @@ static u32 owl_dma_getbytes_chan(struct owl_dma_vchan *vchan)
 			/* Start from the next active node */
 			if (lli->phys == next_lli_phy) {
 				list_for_each_entry(lli, &txd->lli_list, node)
-					bytes += lli->hw.flen;
+					bytes += llc_hw_flen(lli);
 				break;
 			}
 		}
@@ -783,7 +797,7 @@ static enum dma_status owl_dma_tx_status(struct dma_chan *chan,
 	if (vd) {
 		txd = to_owl_txd(&vd->tx);
 		list_for_each_entry(lli, &txd->lli_list, node)
-			bytes += lli->hw.flen;
+			bytes += llc_hw_flen(lli);
 	} else {
 		bytes = owl_dma_getbytes_chan(vchan);
 	}
-- 
2.7.4

[PATCH v7 03/10] dmaengine: Actions: Add support for S700 DMA engine

[Amit Singh Tomar]

DMA controller present on S700 SoC is compatible with the one on S900
(as most of registers are same), but it has different DMA descriptor
structure where registers "fcnt" and "ctrlb" uses different encoding.

For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.

This commit adds support for DMA controller present on S700.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* NO change.
Changes since v5:
        * No change.
Changes since v4:
        * Reordered it from 02/10 to 03/10.
        * Used of_device_get_match_data() instead of
          of_match_device().
        * Removed the uintptr_t used for typecast.
Changes since v3:
        * Added description for enum fields.
        * Restored the old comment.
        * Added detailed comment about, the way FLEN
          and FCNT values are filled.
Changes since v2:
        * No change.
Changes since v1:
        * Defined macro for frame count value.
        * Introduced llc_hw_flen() from patch 2/9.
        * Removed the unnecessary line break.
Changes since rfc:
        * No change.
---
 drivers/dma/owl-dma.c | 57 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/owl-dma.c b/drivers/dma/owl-dma.c
index 948d1bead860..331c8d8b10a3 100644
--- a/drivers/dma/owl-dma.c
+++ b/drivers/dma/owl-dma.c
@@ -149,6 +149,11 @@ enum owl_dmadesc_offsets {
 	OWL_DMADESC_SIZE
 };
 
+enum owl_dma_id {
+	S900_DMA,
+	S700_DMA,
+};
+
 /**
  * struct owl_dma_lli - Link list for dma transfer
  * @hw: hardware link list
@@ -213,6 +218,7 @@ struct owl_dma_vchan {
  * @pchans: array of data for the physical channels
  * @nr_vchans: the number of physical channels
  * @vchans: array of data for the physical channels
+ * @devid: device id based on OWL SoC
  */
 struct owl_dma {
 	struct dma_device	dma;
@@ -227,6 +233,7 @@ struct owl_dma {
 
 	unsigned int		nr_vchans;
 	struct owl_dma_vchan	*vchans;
+	enum owl_dma_id		devid;
 };
 
 static void pchan_update(struct owl_dma_pchan *pchan, u32 reg,
@@ -316,6 +323,10 @@ static inline u32 llc_hw_ctrlb(u32 int_ctl)
 {
 	u32 ctl;
 
+	/*
+	 * Irrespective of the SoC, ctrlb value starts filling from
+	 * bit 18.
+	 */
 	ctl = BIT_FIELD(int_ctl, 7, 0, 18);
 
 	return ctl;
@@ -372,6 +383,7 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 				  struct dma_slave_config *sconfig,
 				  bool is_cyclic)
 {
+	struct owl_dma *od = to_owl_dma(vchan->vc.chan.device);
 	u32 mode, ctrlb;
 
 	mode = OWL_DMA_MODE_PW(0);
@@ -427,14 +439,26 @@ static inline int owl_dma_cfg_lli(struct owl_dma_vchan *vchan,
 	lli->hw[OWL_DMADESC_DADDR] = dst;
 	lli->hw[OWL_DMADESC_SRC_STRIDE] = 0;
 	lli->hw[OWL_DMADESC_DST_STRIDE] = 0;
-	/*
-	 * Word starts from offset 0xC is shared between frame length
-	 * (max frame length is 1MB) and frame count, where first 20
-	 * bits are for frame length and rest of 12 bits are for frame
-	 * count.
-	 */
-	lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
-	lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+
+	if (od->devid == S700_DMA) {
+		/* Max frame length is 1MB */
+		lli->hw[OWL_DMADESC_FLEN] = len;
+		/*
+		 * On S700, word starts from offset 0x1C is shared between
+		 * frame count and ctrlb, where first 12 bits are for frame
+		 * count and rest of 20 bits are for ctrlb.
+		 */
+		lli->hw[OWL_DMADESC_CTRLB] = FCNT_VAL | ctrlb;
+	} else {
+		/*
+		 * On S900, word starts from offset 0xC is shared between
+		 * frame length (max frame length is 1MB) and frame count,
+		 * where first 20 bits are for frame length and rest of
+		 * 12 bits are for frame count.
+		 */
+		lli->hw[OWL_DMADESC_FLEN] = len | FCNT_VAL << 20;
+		lli->hw[OWL_DMADESC_CTRLB] = ctrlb;
+	}
 
 	return 0;
 }
@@ -596,7 +620,7 @@ static irqreturn_t owl_dma_interrupt(int irq, void *dev_id)
 
 		global_irq_pending = dma_readl(od, OWL_DMA_IRQ_PD0);
 
-		if (chan_irq_pending && !(global_irq_pending & BIT(i)))	{
+		if (chan_irq_pending && !(global_irq_pending & BIT(i))) {
 			dev_dbg(od->dma.dev,
 				"global and channel IRQ pending match err\n");
 
@@ -1054,6 +1078,13 @@ static struct dma_chan *owl_dma_of_xlate(struct of_phandle_args *dma_spec,
 	return chan;
 }
 
+static const struct of_device_id owl_dma_match[] = {
+	{ .compatible = "actions,s900-dma", .data = (void *)S900_DMA,},
+	{ .compatible = "actions,s700-dma", .data = (void *)S700_DMA,},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, owl_dma_match);
+
 static int owl_dma_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1083,6 +1114,8 @@ static int owl_dma_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "dma-channels %d, dma-requests %d\n",
 		 nr_channels, nr_requests);
 
+	od->devid = (enum owl_dma_id)of_device_get_match_data(&pdev->dev);
+
 	od->nr_pchans = nr_channels;
 	od->nr_vchans = nr_requests;
 
@@ -1215,12 +1248,6 @@ static int owl_dma_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id owl_dma_match[] = {
-	{ .compatible = "actions,s900-dma", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, owl_dma_match);
-
 static struct platform_driver owl_dma_driver = {
 	.probe	= owl_dma_probe,
 	.remove	= owl_dma_remove,
-- 
2.7.4

[PATCH v7 04/10] clk: actions: Add MMC clock-register reset bits

[Amit Singh Tomar]

This commit adds reset bits needed for MMC clock registers present
on Actions S700 SoC.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes from v4:
        * Reordered it from 03/10 to 04/10.
Changes from v3:
        * NO change.
Changes from v2:
        * No change.
Changes from v1:
        * No change.
Changes from RFC:
        * No change.
---
 drivers/clk/actions/owl-s700.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
index a2f34d13fb54..cd60eca7727d 100644
--- a/drivers/clk/actions/owl-s700.c
+++ b/drivers/clk/actions/owl-s700.c
@@ -577,6 +577,9 @@ static const struct owl_reset_map s700_resets[] = {
 	[RESET_DSI]	= { CMU_DEVRST0, BIT(2) },
 	[RESET_CSI]	= { CMU_DEVRST0, BIT(13) },
 	[RESET_SI]	= { CMU_DEVRST0, BIT(14) },
+	[RESET_SD0]     = { CMU_DEVRST0, BIT(22) },
+	[RESET_SD1]     = { CMU_DEVRST0, BIT(23) },
+	[RESET_SD2]     = { CMU_DEVRST0, BIT(24) },
 	[RESET_I2C0]	= { CMU_DEVRST1, BIT(0) },
 	[RESET_I2C1]	= { CMU_DEVRST1, BIT(1) },
 	[RESET_I2C2]	= { CMU_DEVRST1, BIT(2) },
-- 
2.7.4

[PATCH v7 05/10] arm64: dts: actions: limit address range for pinctrl node

[Amit Singh Tomar]

After commit 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for
Actions Semi S700") following error has been observed while booting
Linux on Cubieboard7-lite(based on S700 SoC).

[    0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
resource [mem 0xe01b0000-0xe01b0fff]
[    0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16

This is due to the fact that memory range for "sps" power domain controller
clashes with pinctrl.

One way to fix it, is to limit pinctrl address range which is safe
to do as current pinctrl driver uses address range only up to 0x100.

This commit limits the pinctrl address range to 0x100 so that it doesn't
conflict with sps range.

Fixes: 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for Actions
Semi S700")

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * Reordered it from 04/10 to 05/10.
Changes since v3:
        * No change.
Changes since v2:
        * this is no more don't merge and fixed
          the broken S700 boot by limiting pinctrl
          address range.
        * Modified the subject to reflect the changes.
Changes since v1:
        * No change.
Changes since RFC:
        * kept as do not merge.
---
 arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2006ad5424fa..f8eb72bb4125 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -231,7 +231,7 @@
 
 		pinctrl: pinctrl@e01b0000 {
 			compatible = "actions,s700-pinctrl";
-			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			reg = <0x0 0xe01b0000 0x0 0x100>;
 			clocks = <&cmu CLK_GPIO>;
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 136>;
-- 
2.7.4

[PATCH v7 06/10] arm64: dts: actions: Add DMA Controller for S700

[Amit Singh Tomar]

This commit adds DMA controller present on Actions S700, it differs from
S900 in terms of number of dma channels and requests.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * Fixed typo in commit message.
        * Placed owl-s700-powergate.h in alphabetical order.
Changes since v2:
        * added power-domain property as sps
          is enabled now and DMA needs it.
Changes since v1:
        * No Change.
Changes since RFC:
        * No Change.
---
 arch/arm64/boot/dts/actions/s700.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index f8eb72bb4125..2c78caebf515 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/actions,s700-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
 #include <dt-bindings/reset/actions,s700-reset.h>
 
 / {
@@ -244,5 +245,19 @@
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		dma: dma-controller@e0230000 {
+			compatible = "actions,s700-dma";
+			reg = <0x0 0xe0230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <10>;
+			dma-requests = <44>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S700_PD_DMA>;
+		};
 	};
 };
-- 
2.7.4

[PATCH v7 07/10] dt-bindings: reset: s700: Add binding constants for mmc

[Amit Singh Tomar]

This commit adds device tree binding reset constants for mmc controller
present on Actions S700 Soc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * No change.
Changes since RFC:
        * added Rob's acked-by tag
---
 include/dt-bindings/reset/actions,s700-reset.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h
index 5e3b16b8ef53..a3118de6d7aa 100644
--- a/include/dt-bindings/reset/actions,s700-reset.h
+++ b/include/dt-bindings/reset/actions,s700-reset.h
@@ -30,5 +30,8 @@
 #define RESET_UART4				20
 #define RESET_UART5				21
 #define RESET_UART6				22
+#define RESET_SD0				23
+#define RESET_SD1				24
+#define RESET_SD2				25
 
 #endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
-- 
2.7.4

[PATCH v7 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc

[Amit Singh Tomar]

The commit adds a new SoC specific compatible string "actions,s700-mmc"
in combination with more generic string "actions,owl-mmc".

Placement order of these strings should abide by the principle of
"from most specific to most general".

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * Added Rob's Reviewed-by tag
---
 Documentation/devicetree/bindings/mmc/owl-mmc.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 1380501fb8f0..5eab25ccf7ae 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    const: actions,owl-mmc
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - const: actions,s700-mmc
+          - const: actions,owl-mmc
 
   reg:
     maxItems: 1
-- 
2.7.4

[PATCH v7 09/10] arm64: dts: actions: Add MMC controller support for S700

[Amit Singh Tomar]

This commits adds support for MMC controllers present on Actions S700 SoC,
there are 3 MMC controllers in this SoC which can be used for accessing
SD/EMMC/SDIO cards.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * Added SoC specific compatibe string.
Changes since RFC:
        * No change.
---
 arch/arm64/boot/dts/actions/s700.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2c78caebf515..9ed88aafc2da 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -259,5 +259,38 @@
 			clocks = <&cmu CLK_DMAC>;
 			power-domains = <&sps S700_PD_DMA>;
 		};
+
+		mmc0: mmc@e0210000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0210000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0214000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0214000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0218000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0218000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
 	};
 };
-- 
2.7.4

[PATCH v7 10/10] arm64: dts: actions: Add uSD support for Cubieboard7

[Amit Singh Tomar]

This commit adds uSD support for Cubieboard7 board based on Actions Semi
S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
added yet, fixed regulator has been used as a regulator node.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* Brought back the uSD fixed regulator.
Changes since v5:
        * Removed the Fixed regulators as these are
          not needed.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * No change.
Changes since RFC:
        * No change.
---
 arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 33 ++++++++++++++++++++++++
 arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
 2 files changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..f81d63261ba2 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -13,6 +13,7 @@
 
 	aliases {
 		serial3 = &uart3;
+		mmc0 = &mmc0;
 	};
 
 	chosen {
@@ -28,6 +29,15 @@
 		device_type = "memory";
 		reg = <0x1 0xe0000000 0x0 0x0>;
 	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	sd_vcc: sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
 };
 
 &i2c0 {
@@ -81,6 +91,14 @@
 			bias-pull-up;
 		};
 	};
+
+	mmc0_default: mmc0_default {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+	};
 };
 
 &timer {
@@ -90,3 +108,18 @@
 &uart3 {
 	status = "okay";
 };
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_default>;
+	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 9ed88aafc2da..ba498cf9217d 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/owl-s700-powergate.h>
 #include <dt-bindings/reset/actions,s700-reset.h>
-- 
2.7.4

Re: [PATCH v7 10/10] arm64: dts: actions: Add uSD support for Cubieboard7

[Manivannan Sadhasivam]

On Sun, Jul 19, 2020 at 11:12:07PM +0530, Amit Singh Tomar wrote:
> This commit adds uSD support for Cubieboard7 board based on Actions Semi
> S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
> added yet, fixed regulator has been used as a regulator node.
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> Changes since v6:
> 	* Brought back the uSD fixed regulator.
> Changes since v5:
>         * Removed the Fixed regulators as these are
>           not needed.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * No change.
> ---
>  arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 33 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
>  2 files changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index 63e375cd9eb4..f81d63261ba2 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -13,6 +13,7 @@
>  
>  	aliases {
>  		serial3 = &uart3;
> +		mmc0 = &mmc0;
>  	};
>  
>  	chosen {
> @@ -28,6 +29,15 @@
>  		device_type = "memory";
>  		reg = <0x1 0xe0000000 0x0 0x0>;
>  	};
> +
> +	/* Fixed regulator used in the absence of PMIC */
> +	sd_vcc: sd-vcc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.1V";
> +		regulator-min-microvolt = <3100000>;
> +		regulator-max-microvolt = <3100000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &i2c0 {
> @@ -81,6 +91,14 @@
>  			bias-pull-up;
>  		};
>  	};
> +
> +	mmc0_default: mmc0_default {
> +		pinmux {
> +			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> +				 "sd0_cmd_mfp", "sd0_clk_mfp";
> +			function = "sd0";
> +		};
> +	};
>  };
>  
>  &timer {
> @@ -90,3 +108,18 @@
>  &uart3 {
>  	status = "okay";
>  };
> +
> +/* uSD */
> +&mmc0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_default>;
> +	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
> +	no-sdio;
> +	no-mmc;
> +	no-1-8-v;
> +	bus-width = <4>;
> +	vmmc-supply = <&sd_vcc>;
> +	vqmmc-supply = <&sd_vcc>;
> +};
> +
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 9ed88aafc2da..ba498cf9217d 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/clock/actions,s700-cmu.h>
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/owl-s700-powergate.h>
>  #include <dt-bindings/reset/actions,s700-reset.h>
> -- 
> 2.7.4
> 

Re: [PATCH v7 01/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml

[Rob Herring]

On Sun, 19 Jul 2020 23:11:58 +0530, Amit Singh Tomar wrote:
> Converts the device tree bindings for the Actions Semi Owl SoCs DMA
> Controller over to YAML schemas.
> 
> It also adds new compatible string "actions,s700-dma".
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Removed Rob's Reviewed-by tag as his bot found errors
>           running 'make dt_binding_check'.
>         * Fixed the errore reported by Rob's bot, adjusting the reg
>           property in example.
> Changes since v4:
>         * Added Rob's Reviewed-by tag.
>         * Re-order it from 05/10 to 01/10.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * Addressed Rob's comments:
>            - removed unnecessary description.
>            - added unevaluatedProperties
>            - added relevant information about
>              dma-channels and dma-request
>         * Added power-domain property.
> Change since v1:
>         * Updated the description field to reflect
>           only the necessary information.
>         * replaced the maxItems field with description for each
>           controller attribute(except interrupts).
>         * Replaced the clock macro with number to keep the example
>           as independent as possible.
> ---
>  Documentation/devicetree/bindings/dma/owl-dma.txt  | 47 -------------
>  Documentation/devicetree/bindings/dma/owl-dma.yaml | 79 ++++++++++++++++++++++
>  2 files changed, 79 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v7 01/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml

[Vinod Koul]

On 19-07-20, 23:11, Amit Singh Tomar wrote:
> Converts the device tree bindings for the Actions Semi Owl SoCs DMA
> Controller over to YAML schemas.
> 
> It also adds new compatible string "actions,s700-dma".

Applied, thanks

-- 
~Vinod

Re: [PATCH v7 02/10] dmaengine: Actions: get rid of bit fields from dma descriptor

[Vinod Koul]

On 19-07-20, 23:11, Amit Singh Tomar wrote:
> At the moment, Driver uses bit fields to describe registers of the DMA
> descriptor structure that makes it less portable and maintainable, and
> Andre suugested(and even sketched important bits for it) to make use of
> array to describe this DMA descriptors instead. It gives the flexibility
> while extending support for other platform such as Actions S700.
> 
> This commit removes the "owl_dma_lli_hw" (that includes bit-fields) and
> uses array to describe DMA descriptor.

Applied, thanks

-- 
~Vinod

Re: [PATCH v7 03/10] dmaengine: Actions: Add support for S700 DMA engine

[Vinod Koul]

On 19-07-20, 23:12, Amit Singh Tomar wrote:
> DMA controller present on S700 SoC is compatible with the one on S900
> (as most of registers are same), but it has different DMA descriptor
> structure where registers "fcnt" and "ctrlb" uses different encoding.
> 
> For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
> bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.
> 
> This commit adds support for DMA controller present on S700.

Applied, thanks

-- 
~Vinod

Re: [PATCH v7 04/10] clk: actions: Add MMC clock-register reset bits

[Manivannan Sadhasivam]

On 0719, Amit Singh Tomar wrote:
> This commit adds reset bits needed for MMC clock registers present
> on Actions S700 SoC.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Stephen, can you please apply this patch? I'll queue the dts bits for v5.10.

Andreas: Let me know if you want to do the PR! These patches are waiting to be
queued for a while...

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes from v4:
>         * Reordered it from 03/10 to 04/10.
> Changes from v3:
>         * NO change.
> Changes from v2:
>         * No change.
> Changes from v1:
>         * No change.
> Changes from RFC:
>         * No change.
> ---
>  drivers/clk/actions/owl-s700.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
> index a2f34d13fb54..cd60eca7727d 100644
> --- a/drivers/clk/actions/owl-s700.c
> +++ b/drivers/clk/actions/owl-s700.c
> @@ -577,6 +577,9 @@ static const struct owl_reset_map s700_resets[] = {
>  	[RESET_DSI]	= { CMU_DEVRST0, BIT(2) },
>  	[RESET_CSI]	= { CMU_DEVRST0, BIT(13) },
>  	[RESET_SI]	= { CMU_DEVRST0, BIT(14) },
> +	[RESET_SD0]     = { CMU_DEVRST0, BIT(22) },
> +	[RESET_SD1]     = { CMU_DEVRST0, BIT(23) },
> +	[RESET_SD2]     = { CMU_DEVRST0, BIT(24) },
>  	[RESET_I2C0]	= { CMU_DEVRST1, BIT(0) },
>  	[RESET_I2C1]	= { CMU_DEVRST1, BIT(1) },
>  	[RESET_I2C2]	= { CMU_DEVRST1, BIT(2) },
> -- 
> 2.7.4
> 

Re: [PATCH v7 07/10] dt-bindings: reset: s700: Add binding constants for mmc

[Manivannan Sadhasivam]

On 0719, Amit Singh Tomar wrote:
> This commit adds device tree binding reset constants for mmc controller
> present on Actions S700 Soc.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

I think Stephen should queue this one too but he is not in CC. Can you please
resend it?

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * added Rob's acked-by tag
> ---
>  include/dt-bindings/reset/actions,s700-reset.h | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h
> index 5e3b16b8ef53..a3118de6d7aa 100644
> --- a/include/dt-bindings/reset/actions,s700-reset.h
> +++ b/include/dt-bindings/reset/actions,s700-reset.h
> @@ -30,5 +30,8 @@
>  #define RESET_UART4				20
>  #define RESET_UART5				21
>  #define RESET_UART6				22
> +#define RESET_SD0				23
> +#define RESET_SD1				24
> +#define RESET_SD2				25
>  
>  #endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
> -- 
> 2.7.4
> 

Re: [PATCH v7 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc

[Manivannan Sadhasivam]

On 0719, Amit Singh Tomar wrote:
> The commit adds a new SoC specific compatible string "actions,s700-mmc"
> in combination with more generic string "actions,owl-mmc".
> 
> Placement order of these strings should abide by the principle of
> "from most specific to most general".
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Here also, neither Ulf nor mmc list is kept in CC. Please resend!

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * Added Rob's Reviewed-by tag
> ---
>  Documentation/devicetree/bindings/mmc/owl-mmc.yaml | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> index 1380501fb8f0..5eab25ccf7ae 100644
> --- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> @@ -14,7 +14,11 @@ maintainers:
>  
>  properties:
>    compatible:
> -    const: actions,owl-mmc
> +    oneOf:
> +      - const: actions,owl-mmc
> +      - items:
> +          - const: actions,s700-mmc
> +          - const: actions,owl-mmc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.7.4
> 

Re: [PATCH v7 04/10] clk: actions: Add MMC clock-register reset bits

[Manivannan Sadhasivam]

On 0828, Manivannan Sadhasivam wrote:
> On 0719, Amit Singh Tomar wrote:
> > This commit adds reset bits needed for MMC clock registers present
> > on Actions S700 SoC.
> > 
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> 
> Stephen, can you please apply this patch? I'll queue the dts bits for v5.10.
> 

Just realized that you'd need to have the bindings patch also. I've asked Amit
to resend with you in CC for that patch.

Thanks,
Mani

> Andreas: Let me know if you want to do the PR! These patches are waiting to be
> queued for a while...
> 
> Thanks,
> Mani
> 
> > ---
> > Changes since v6:
> > 	* No change.
> > Changes since v5:
> >         * Added Mani's Reviewed-by: tag.
> > Changes from v4:
> >         * Reordered it from 03/10 to 04/10.
> > Changes from v3:
> >         * NO change.
> > Changes from v2:
> >         * No change.
> > Changes from v1:
> >         * No change.
> > Changes from RFC:
> >         * No change.
> > ---
> >  drivers/clk/actions/owl-s700.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
> > index a2f34d13fb54..cd60eca7727d 100644
> > --- a/drivers/clk/actions/owl-s700.c
> > +++ b/drivers/clk/actions/owl-s700.c
> > @@ -577,6 +577,9 @@ static const struct owl_reset_map s700_resets[] = {
> >  	[RESET_DSI]	= { CMU_DEVRST0, BIT(2) },
> >  	[RESET_CSI]	= { CMU_DEVRST0, BIT(13) },
> >  	[RESET_SI]	= { CMU_DEVRST0, BIT(14) },
> > +	[RESET_SD0]     = { CMU_DEVRST0, BIT(22) },
> > +	[RESET_SD1]     = { CMU_DEVRST0, BIT(23) },
> > +	[RESET_SD2]     = { CMU_DEVRST0, BIT(24) },
> >  	[RESET_I2C0]	= { CMU_DEVRST1, BIT(0) },
> >  	[RESET_I2C1]	= { CMU_DEVRST1, BIT(1) },
> >  	[RESET_I2C2]	= { CMU_DEVRST1, BIT(2) },
> > -- 
> > 2.7.4
> > 

[PATCH v7 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc

[Amit Singh Tomar]

The commit adds a new SoC specific compatible string "actions,s700-mmc"
in combination with more generic string "actions,owl-mmc".

Placement order of these strings should abide by the principle of
"from most specific to most general".

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * Added Rob's Reviewed-by tag
---
 Documentation/devicetree/bindings/mmc/owl-mmc.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 1380501fb8f0..5eab25ccf7ae 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    const: actions,owl-mmc
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - const: actions,s700-mmc
+          - const: actions,owl-mmc
 
   reg:
     maxItems: 1
-- 
2.7.4

[PATCH v7 07/10] dt-bindings: reset: s700: Add binding constants for mmc

[Amit Singh Tomar]

This commit adds device tree binding reset constants for mmc controller
present on Actions S700 Soc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v6:
	* No change.
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * No change.
Changes since RFC:
        * added Rob's acked-by tag
---
 include/dt-bindings/reset/actions,s700-reset.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h
index 5e3b16b8ef53..a3118de6d7aa 100644
--- a/include/dt-bindings/reset/actions,s700-reset.h
+++ b/include/dt-bindings/reset/actions,s700-reset.h
@@ -30,5 +30,8 @@
 #define RESET_UART4				20
 #define RESET_UART5				21
 #define RESET_UART6				22
+#define RESET_SD0				23
+#define RESET_SD1				24
+#define RESET_SD2				25
 
 #endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
-- 
2.7.4

Re: [PATCH v7 05/10] arm64: dts: actions: limit address range for pinctrl node

[Manivannan Sadhasivam]

On Sun, Jul 19, 2020 at 11:12:02PM +0530, Amit Singh Tomar wrote:
> After commit 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for
> Actions Semi S700") following error has been observed while booting
> Linux on Cubieboard7-lite(based on S700 SoC).
> 
> [    0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
> resource [mem 0xe01b0000-0xe01b0fff]
> [    0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16
> 
> This is due to the fact that memory range for "sps" power domain controller
> clashes with pinctrl.
> 
> One way to fix it, is to limit pinctrl address range which is safe
> to do as current pinctrl driver uses address range only up to 0x100.
> 
> This commit limits the pinctrl address range to 0x100 so that it doesn't
> conflict with sps range.
> 
> Fixes: 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for Actions
> Semi S700")
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Suggested-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Applied for v5.10!

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * Reordered it from 04/10 to 05/10.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * this is no more don't merge and fixed
>           the broken S700 boot by limiting pinctrl
>           address range.
>         * Modified the subject to reflect the changes.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * kept as do not merge.
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 2006ad5424fa..f8eb72bb4125 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -231,7 +231,7 @@
>  
>  		pinctrl: pinctrl@e01b0000 {
>  			compatible = "actions,s700-pinctrl";
> -			reg = <0x0 0xe01b0000 0x0 0x1000>;
> +			reg = <0x0 0xe01b0000 0x0 0x100>;
>  			clocks = <&cmu CLK_GPIO>;
>  			gpio-controller;
>  			gpio-ranges = <&pinctrl 0 0 136>;
> -- 
> 2.7.4
> 

Re: [PATCH v7 06/10] arm64: dts: actions: Add DMA Controller for S700

[Manivannan Sadhasivam]

On Sun, Jul 19, 2020 at 11:12:03PM +0530, Amit Singh Tomar wrote:
> This commit adds DMA controller present on Actions S700, it differs from
> S900 in terms of number of dma channels and requests.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Applied for v5.10!

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * Fixed typo in commit message.
>         * Placed owl-s700-powergate.h in alphabetical order.
> Changes since v2:
>         * added power-domain property as sps
>           is enabled now and DMA needs it.
> Changes since v1:
>         * No Change.
> Changes since RFC:
>         * No Change.
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index f8eb72bb4125..2c78caebf515 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/clock/actions,s700-cmu.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/owl-s700-powergate.h>
>  #include <dt-bindings/reset/actions,s700-reset.h>
>  
>  / {
> @@ -244,5 +245,19 @@
>  				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
>  				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> +
> +		dma: dma-controller@e0230000 {
> +			compatible = "actions,s700-dma";
> +			reg = <0x0 0xe0230000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			dma-channels = <10>;
> +			dma-requests = <44>;
> +			clocks = <&cmu CLK_DMAC>;
> +			power-domains = <&sps S700_PD_DMA>;
> +		};
>  	};
>  };
> -- 
> 2.7.4
> 

Re: [PATCH v7 09/10] arm64: dts: actions: Add MMC controller support for S700

[Manivannan Sadhasivam]

On Sun, Jul 19, 2020 at 11:12:06PM +0530, Amit Singh Tomar wrote:
> This commits adds support for MMC controllers present on Actions S700 SoC,
> there are 3 MMC controllers in this SoC which can be used for accessing
> SD/EMMC/SDIO cards.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Not applying this one as the bindings patch is not merged yet! Please post
it in next revision.

Thanks,
Mani

> ---
> Changes since v6:
> 	* No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * Added SoC specific compatibe string.
> Changes since RFC:
>         * No change.
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 2c78caebf515..9ed88aafc2da 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -259,5 +259,38 @@
>  			clocks = <&cmu CLK_DMAC>;
>  			power-domains = <&sps S700_PD_DMA>;
>  		};
> +
> +		mmc0: mmc@e0210000 {
> +			compatible = "actions,s700-mmc", "actions,owl-mmc";
> +			reg = <0x0 0xe0210000 0x0 0x4000>;
> +			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cmu CLK_SD0>;
> +			resets = <&cmu RESET_SD0>;
> +			dmas = <&dma 2>;
> +			dma-names = "mmc";
> +			status = "disabled";
> +		};
> +
> +		mmc1: mmc@e0214000 {
> +			compatible = "actions,s700-mmc", "actions,owl-mmc";
> +			reg = <0x0 0xe0214000 0x0 0x4000>;
> +			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cmu CLK_SD1>;
> +			resets = <&cmu RESET_SD1>;
> +			dmas = <&dma 3>;
> +			dma-names = "mmc";
> +			status = "disabled";
> +		};
> +
> +		mmc2: mmc@e0218000 {
> +			compatible = "actions,s700-mmc", "actions,owl-mmc";
> +			reg = <0x0 0xe0218000 0x0 0x4000>;
> +			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cmu CLK_SD2>;
> +			resets = <&cmu RESET_SD2>;
> +			dmas = <&dma 4>;
> +			dma-names = "mmc";
> +			status = "disabled";
> +		};
>  	};
>  };
> -- 
> 2.7.4
> 

Re: [PATCH v7 10/10] arm64: dts: actions: Add uSD support for Cubieboard7

[Manivannan Sadhasivam]

On Sun, Jul 19, 2020 at 11:12:07PM +0530, Amit Singh Tomar wrote:
> This commit adds uSD support for Cubieboard7 board based on Actions Semi
> S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
> added yet, fixed regulator has been used as a regulator node.
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Not applying this one! Please post it in next revision.

Thanks,
Mani

> ---
> Changes since v6:
> 	* Brought back the uSD fixed regulator.
> Changes since v5:
>         * Removed the Fixed regulators as these are
>           not needed.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * No change.
> ---
>  arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 33 ++++++++++++++++++++++++
>  arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
>  2 files changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index 63e375cd9eb4..f81d63261ba2 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -13,6 +13,7 @@
>  
>  	aliases {
>  		serial3 = &uart3;
> +		mmc0 = &mmc0;
>  	};
>  
>  	chosen {
> @@ -28,6 +29,15 @@
>  		device_type = "memory";
>  		reg = <0x1 0xe0000000 0x0 0x0>;
>  	};
> +
> +	/* Fixed regulator used in the absence of PMIC */
> +	sd_vcc: sd-vcc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.1V";
> +		regulator-min-microvolt = <3100000>;
> +		regulator-max-microvolt = <3100000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &i2c0 {
> @@ -81,6 +91,14 @@
>  			bias-pull-up;
>  		};
>  	};
> +
> +	mmc0_default: mmc0_default {
> +		pinmux {
> +			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> +				 "sd0_cmd_mfp", "sd0_clk_mfp";
> +			function = "sd0";
> +		};
> +	};
>  };
>  
>  &timer {
> @@ -90,3 +108,18 @@
>  &uart3 {
>  	status = "okay";
>  };
> +
> +/* uSD */
> +&mmc0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_default>;
> +	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
> +	no-sdio;
> +	no-mmc;
> +	no-1-8-v;
> +	bus-width = <4>;
> +	vmmc-supply = <&sd_vcc>;
> +	vqmmc-supply = <&sd_vcc>;
> +};
> +
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 9ed88aafc2da..ba498cf9217d 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/clock/actions,s700-cmu.h>
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/owl-s700-powergate.h>
>  #include <dt-bindings/reset/actions,s700-reset.h>
> -- 
> 2.7.4
> 

Re: [PATCH v7 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc

[Ulf Hansson]

On Fri, 11 Sep 2020 at 07:24, Amit Singh Tomar <amittomer25@gmail.com> wrote:
>
> The commit adds a new SoC specific compatible string "actions,s700-mmc"
> in combination with more generic string "actions,owl-mmc".
>
> Placement order of these strings should abide by the principle of
> "from most specific to most general".
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> Changes since v6:
>         * No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * Added Rob's Reviewed-by tag
> ---
>  Documentation/devicetree/bindings/mmc/owl-mmc.yaml | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> index 1380501fb8f0..5eab25ccf7ae 100644
> --- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
> @@ -14,7 +14,11 @@ maintainers:
>
>  properties:
>    compatible:
> -    const: actions,owl-mmc
> +    oneOf:
> +      - const: actions,owl-mmc
> +      - items:
> +          - const: actions,s700-mmc
> +          - const: actions,owl-mmc
>
>    reg:
>      maxItems: 1
> --
> 2.7.4
>

Re: [PATCH v7 07/10] dt-bindings: reset: s700: Add binding constants for mmc

[Amit Tomer]

Hi Stephen ,

Could you please help get this merged ?

Thanks
-Amit

On Fri, Sep 11, 2020 at 10:59 AM Amit Singh Tomar <amittomer25@gmail.com> wrote:
>
> This commit adds device tree binding reset constants for mmc controller
> present on Actions S700 Soc.
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> ---
> Changes since v6:
>         * No change.
> Changes since v5:
>         * Added Mani's Reviewed-by: tag.
> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * added Rob's acked-by tag
> ---
>  include/dt-bindings/reset/actions,s700-reset.h | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h
> index 5e3b16b8ef53..a3118de6d7aa 100644
> --- a/include/dt-bindings/reset/actions,s700-reset.h
> +++ b/include/dt-bindings/reset/actions,s700-reset.h
> @@ -30,5 +30,8 @@
>  #define RESET_UART4                            20
>  #define RESET_UART5                            21
>  #define RESET_UART6                            22
> +#define RESET_SD0                              23
> +#define RESET_SD1                              24
> +#define RESET_SD2                              25
>
>  #endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
> --
> 2.7.4
>