* [PATCH v6 0/2] Add support for Tianma nt36672a video mode panel
@ 2020-08-31 13:02 Sumit Semwal
2020-08-31 13:02 ` [PATCH v6 1/2] dt-bindings: display: panel: Add bindings for Novatek nt36672a Sumit Semwal
2020-08-31 13:02 ` [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver Sumit Semwal
0 siblings, 2 replies; 4+ messages in thread
From: Sumit Semwal @ 2020-08-31 13:02 UTC (permalink / raw)
To: Thierry Reding, Sam Ravnborg
Cc: David Airlie, Daniel Vetter, Mauro Carvalho Chehab,
David S . Miller, Rob Herring, linux-kernel, dri-devel,
devicetree, Bjorn Andersson, Sumit Semwal
Some Poco F1 phones from Xiaomi have a FHD+ video mode panel based on the
Novatek NT36672A display controller; Add support for the same.
Most of the panel data is taken from downstream panel dts, and is converted to
drm-panel based driver by me.
It has been validated with v5.9-rc1 based drm-misc-next on Poco F1 phone; my tree with other
dependent patches is here [1]
[1]: https://git.linaro.org/people/sumit.semwal/linux-dev.git/log/?h=dev/poco-panel-upstreaming
---
v2: In dt-binding, removed ports node, making port@0 directly under panel@0 node.
Also updated the panel_on delay to a safer 200ms as needed for latest Android.
v3: Replaced port@0 with just port in panel@0 node.
v4: Since "0425662fdf05: drm: Nuke mode->vrefresh", we have to calculate
vrefresh on demand. Update for it.
v5: Fixed review comments from Sam:
- rebased on top of drm-misc-next
remove return of drm_panel_add()
remove drm_panel_detach()
- renamed the panel driver file to reflect that this is a novatek
nt36672a display driver and not only for tianma panels.
Adjusted some internal names also to reflect the same.
- corrected changelog to add info about the generic Novatek DSI IC
- corrected compatible string accordingly
- removed pinctrl
- used drm_panel* API for prepare/unprepare/disable/remove
v6: Fixed few review comments on v5 from Sam:
- add dev_err_probe() support
- move DRM_* error printing to dev_err()
- removed a few unnecessary bits
Sumit Semwal (2):
dt-bindings: display: panel: Add bindings for Novatek nt36672a
drm: panel: Add novatek nt36672a panel driver
.../display/panel/novatek,nt36672a.yaml | 87 ++
MAINTAINERS | 7 +
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-novatek-nt36672a.c | 740 ++++++++++++++++++
5 files changed, 845 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36672a.c
--
2.28.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v6 1/2] dt-bindings: display: panel: Add bindings for Novatek nt36672a 2020-08-31 13:02 [PATCH v6 0/2] Add support for Tianma nt36672a video mode panel Sumit Semwal @ 2020-08-31 13:02 ` Sumit Semwal 2020-08-31 13:02 ` [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver Sumit Semwal 1 sibling, 0 replies; 4+ messages in thread From: Sumit Semwal @ 2020-08-31 13:02 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg Cc: David Airlie, Daniel Vetter, Mauro Carvalho Chehab, David S . Miller, Rob Herring, linux-kernel, dri-devel, devicetree, Bjorn Andersson, Sumit Semwal Novatek nt36672a is a display driver IC that can drive DSI panel. It is also present in the Tianma video mode panel, which is a FHD+ panel with a resolution of 1080x2246 and 6.18 inches size. It is found in some of the Poco F1 phones. This patch adds the display driver for the IC, with support added for this tianma fhd video mode panel. Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> --- v2: remove ports node, making port@0 directly under panel@0 node. v3: updated to replace port@0 to just 'port'. v5: renamed to novatek,nt36672a, since the binding is for the IC and not the panel. v6: v5 review comments incorporated. - added enum for the compatible part, since it can be extended in future. - few cosmetic updates. --- .../display/panel/novatek,nt36672a.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml new file mode 100644 index 000000000000..d2170de6b723 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT36672A based DSI display Panels + +maintainers: + - Sumit Semwal <sumit.semwal@linaro.org> + +description: | + The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi + panels. + Right now, support is added only for a Tianma FHD+ LCD display panel with a + resolution of 1080x2246. It is a video mode DSI panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,fhd-video + - const: novatek,nt36672a + description: This indicates the panel manufacturer of the panel that is + in turn using the NT36672A panel driver. This compatible string + determines how the NT36672A panel driver is configured for the indicated + panel. The novatek,nt36672a compatible shall always be provided as a fallback. + + reset-gpios: + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + vddio-supply: + description: phandle of the regulator that provides the supply voltage + Power IC supply + + vddpos-supply: + description: phandle of the positive boost supply regulator + + vddneg-supply: + description: phandle of the negative boost supply regulator + + reg: true + port: true + +required: + - compatible + - reg + - vddi0-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,fhd-video", "novatek,nt36672a"; + reg = <0>; + vddi0-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + port { + tianma_nt36672a_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... -- 2.28.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver 2020-08-31 13:02 [PATCH v6 0/2] Add support for Tianma nt36672a video mode panel Sumit Semwal 2020-08-31 13:02 ` [PATCH v6 1/2] dt-bindings: display: panel: Add bindings for Novatek nt36672a Sumit Semwal @ 2020-08-31 13:02 ` Sumit Semwal 2020-08-31 19:15 ` Bjorn Andersson 1 sibling, 1 reply; 4+ messages in thread From: Sumit Semwal @ 2020-08-31 13:02 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg Cc: David Airlie, Daniel Vetter, Mauro Carvalho Chehab, David S . Miller, Rob Herring, linux-kernel, dri-devel, devicetree, Bjorn Andersson, Sumit Semwal, Benni Steini Novatek NT36672a is a generic DSI IC that drives command and video mode panels. Add the driver for it. Right now adding support for some Poco F1 phones that have an LCD panel from Tianma connected with this IC, with a resolution of 1080x2246 that operates in DSI video mode. During testing, Benni Steini <bennisteinir@gmail.com> helped us fix the reset sequence timing (from 10ms to 20ms), to get the bootanimation to work on Android. With current AOSP, we need to increase it to 200ms - this seems to be a safe high value to avoid a white screen occasionally. Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benni Steini <bennisteinir@gmail.com> --- v2: increase reset sequence timing to a safe 200ms v4: Since "0425662fdf05: drm: Nuke mode->vrefresh", we have to calculate vrefresh on demand. Update for it. v5: Fixed review comments from Sam: - rebased on top of drm-misc-next remove return of drm_panel_add() remove drm_panel_detach() - renamed the panel driver file to reflect that this is a novatek nt36672a display driver and not only for tianma panels. Adjusted some internal names also to reflect the same. - corrected changelog to add info about the generic Novatek DSI IC - corrected compatible string accordingly - removed pinctrl - used drm_panel* API for prepare/unprepare/disable/remove v6: Fixed few review comments on v5 from Sam: - add dev_err_probe() support - move DRM_* error printing to dev_err() - removed a few unnecessary bits --- MAINTAINERS | 7 + drivers/gpu/drm/panel/Kconfig | 10 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-novatek-nt36672a.c | 740 ++++++++++++++++++ 4 files changed, 758 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36672a.c diff --git a/MAINTAINERS b/MAINTAINERS index 01fb9ee6b951..aeecade2d65f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5619,6 +5619,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/ste,mcde.txt F: drivers/gpu/drm/mcde/ +DRM DRIVER FOR TIANMA NT36672A PANELS +M: Sumit Semwal <sumit.semwal@linaro.org> +S: Maintained +T: git git://anongit.freedesktop.org/drm/drm-misc +F: Documentation/devicetree/bindings/display/panel/tianma,nt36672a-panel.yaml +F: drivers/gpu/drm/panel/panel-tianma-nt36672a.c + DRM DRIVER FOR TDFX VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/tdfx/ diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 8d97d07c5871..02600f12a063 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -208,6 +208,16 @@ config DRM_PANEL_NOVATEK_NT35510 around the Novatek NT35510 display controller, such as some Hydis panels. +config DRM_PANEL_NOVATEK_NT36672A + tristate "Novatek NT36672A DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the panels built + around the Novatek NT36672A display controller, such as some + Tianma panels used in a few Xiaomi Poco F1 mobile phone. + config DRM_PANEL_NOVATEK_NT39016 tristate "Novatek NT39016 RGB/SPI panel" depends on OF && SPI diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 15a4e7752951..4a36eb45f670 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o +obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c new file mode 100644 index 000000000000..675e9d52f3c4 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c @@ -0,0 +1,740 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Linaro Ltd + * Author: Sumit Semwal <sumit.semwal@linaro.org> + * + * This driver is for the DSI interface to panels using the NT36672A display driver IC + * from Novatek. + * Currently supported are the Tianma FHD+ panels found in some Xiaomi phones, including + * some variants of the Poco F1 phone. + * + * Panels using the Novatek NT37762A IC should add appropriate configuration per-panel and + * use this driver. + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include <linux/gpio/consumer.h> +#include <linux/pinctrl/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_device.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct panel_cmd { + size_t len; + const char *data; +}; + +#define _INIT_CMD(...) { \ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +static const char * const regulator_names[] = { + "vddio", + "vddpos", + "vddneg", +}; + +static unsigned long const regulator_enable_loads[] = { + 62000, + 100000, + 100000 +}; + +static unsigned long const regulator_disable_loads[] = { + 80, + 100, + 100 +}; + +struct panel_desc { + const struct drm_display_mode *display_mode; + const char *panel_name; + + unsigned int width_mm; + unsigned int height_mm; + + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + unsigned int lanes; + + const struct panel_cmd *on_cmds_1; + const struct panel_cmd *on_cmds_2; + + const struct panel_cmd *off_cmds; +}; + +struct panel_info { + struct drm_panel base; + struct mipi_dsi_device *link; + const struct panel_desc *desc; + + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; + + struct gpio_desc *reset_gpio; + + bool prepared; +}; + +static inline struct panel_info *to_panel_info(struct drm_panel *panel) +{ + return container_of(panel, struct panel_info, base); +} + +static int send_mipi_cmds(struct drm_panel *panel, const struct panel_cmd *cmds) +{ + struct panel_info *pinfo = to_panel_info(panel); + unsigned int i = 0; + int err; + + if (!cmds) + return -EFAULT; + + for (i = 0; cmds[i].len != 0; i++) { + const struct panel_cmd *cmd = &cmds[i]; + + if (cmd->len == 2) + err = mipi_dsi_dcs_write(pinfo->link, + cmd->data[1], NULL, 0); + else + err = mipi_dsi_dcs_write(pinfo->link, + cmd->data[1], cmd->data + 2, + cmd->len - 2); + + if (err < 0) + return err; + } + + return 0; +} + +static int novatek_panel_power_off(struct drm_panel *panel) +{ + struct panel_info *pinfo = to_panel_info(panel); + int i, ret = 0; + + gpiod_set_value(pinfo->reset_gpio, 0); + + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) { + ret = regulator_set_load(pinfo->supplies[i].consumer, + regulator_disable_loads[i]); + if (ret) { + dev_err(panel->dev, "regulator_set_load failed %d\n", ret); + return ret; + } + } + + ret = regulator_bulk_disable(ARRAY_SIZE(pinfo->supplies), pinfo->supplies); + if (ret) + dev_err(panel->dev, "regulator_bulk_disable failed %d\n", ret); + + return ret; +} + +static int nt36672a_panel_unprepare(struct drm_panel *panel) +{ + struct panel_info *pinfo = to_panel_info(panel); + int ret; + + if (!pinfo->prepared) + return 0; + + /* send off cmds */ + ret = send_mipi_cmds(panel, pinfo->desc->off_cmds); + + if (ret < 0) + dev_err(panel->dev, "failed to send DCS off cmds: %d\n", ret); + + ret = mipi_dsi_dcs_set_display_off(pinfo->link); + if (ret < 0) + dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret); + + /* 120ms delay required here as per DCS spec */ + msleep(120); + + ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->link); + if (ret < 0) + dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret); + + /* 0x3C = 60ms delay */ + msleep(60); + + ret = novatek_panel_power_off(panel); + if (ret < 0) + dev_err(panel->dev, "power_off failed ret = %d\n", ret); + + pinfo->prepared = false; + + return ret; +} + +static int novatek_panel_power_on(struct panel_info *pinfo) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) { + ret = regulator_set_load(pinfo->supplies[i].consumer, + regulator_enable_loads[i]); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(pinfo->supplies), pinfo->supplies); + if (ret < 0) + return ret; + + /* + * As per downstream kernel, Reset sequence of Tianma FHD panel requires the panel to + * be out of reset for 10ms, followed by being held in reset for 10ms. But for Android + * AOSP, we needed to bump it upto 200ms otherwise we get white screen sometimes. + * FIXME: Try to reduce this 200ms to a lesser value. + */ + gpiod_set_value(pinfo->reset_gpio, 0); + msleep(200); + gpiod_set_value(pinfo->reset_gpio, 1); + msleep(200); + + return 0; +} + +static int nt36672a_panel_prepare(struct drm_panel *panel) +{ + struct panel_info *pinfo = to_panel_info(panel); + int err; + + if (pinfo->prepared) + return 0; + + err = novatek_panel_power_on(pinfo); + if (err < 0) + goto poweroff; + + /* send first part of init cmds */ + err = send_mipi_cmds(panel, pinfo->desc->on_cmds_1); + + if (err < 0) { + dev_err(panel->dev, "failed to send DCS Init 1st Code: %d\n", err); + goto poweroff; + } + + err = mipi_dsi_dcs_exit_sleep_mode(pinfo->link); + if (err < 0) { + dev_err(panel->dev, "failed to exit sleep mode: %d\n", err); + goto poweroff; + } + + /* 0x46 = 70 ms delay */ + msleep(70); + + err = mipi_dsi_dcs_set_display_on(pinfo->link); + if (err < 0) { + dev_err(panel->dev, "failed to Set Display ON: %d\n", err); + goto poweroff; + } + + /* Send rest of the init cmds */ + err = send_mipi_cmds(panel, pinfo->desc->on_cmds_2); + + if (err < 0) { + dev_err(panel->dev, "failed to send DCS Init 2nd Code: %d\n", err); + goto poweroff; + } + + msleep(120); + + pinfo->prepared = true; + + return 0; + +poweroff: + gpiod_set_value(pinfo->reset_gpio, 1); + return err; +} + +static int nt36672a_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct panel_info *pinfo = to_panel_info(panel); + const struct drm_display_mode *m = pinfo->desc->display_mode; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, m); + if (!mode) { + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", m->hdisplay, + m->vdisplay, drm_mode_vrefresh(m)); + return -ENOMEM; + } + + connector->display_info.width_mm = pinfo->desc->width_mm; + connector->display_info.height_mm = pinfo->desc->height_mm; + + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs panel_funcs = { + .unprepare = nt36672a_panel_unprepare, + .prepare = nt36672a_panel_prepare, + .get_modes = nt36672a_panel_get_modes, +}; + +static const struct panel_cmd tianma_fhd_video_on_cmds_1[] = { + /* skin enhancement mode */ + _INIT_CMD(0x00, 0xFF, 0x22), + _INIT_CMD(0x00, 0x00, 0x40), + _INIT_CMD(0x00, 0x01, 0xC0), + _INIT_CMD(0x00, 0x02, 0x40), + _INIT_CMD(0x00, 0x03, 0x40), + _INIT_CMD(0x00, 0x04, 0x40), + _INIT_CMD(0x00, 0x05, 0x40), + _INIT_CMD(0x00, 0x06, 0x40), + _INIT_CMD(0x00, 0x07, 0x40), + _INIT_CMD(0x00, 0x08, 0x40), + _INIT_CMD(0x00, 0x09, 0x40), + _INIT_CMD(0x00, 0x0A, 0x40), + _INIT_CMD(0x00, 0x0B, 0x40), + _INIT_CMD(0x00, 0x0C, 0x40), + _INIT_CMD(0x00, 0x0D, 0x40), + _INIT_CMD(0x00, 0x0E, 0x40), + _INIT_CMD(0x00, 0x0F, 0x40), + _INIT_CMD(0x00, 0x10, 0x40), + _INIT_CMD(0x00, 0x11, 0x50), + _INIT_CMD(0x00, 0x12, 0x60), + _INIT_CMD(0x00, 0x13, 0x70), + _INIT_CMD(0x00, 0x14, 0x58), + _INIT_CMD(0x00, 0x15, 0x68), + _INIT_CMD(0x00, 0x16, 0x78), + _INIT_CMD(0x00, 0x17, 0x77), + _INIT_CMD(0x00, 0x18, 0x39), + _INIT_CMD(0x00, 0x19, 0x2D), + _INIT_CMD(0x00, 0x1A, 0x2E), + _INIT_CMD(0x00, 0x1B, 0x32), + _INIT_CMD(0x00, 0x1C, 0x37), + _INIT_CMD(0x00, 0x1D, 0x3A), + _INIT_CMD(0x00, 0x1E, 0x40), + _INIT_CMD(0x00, 0x1F, 0x40), + _INIT_CMD(0x00, 0x20, 0x40), + _INIT_CMD(0x00, 0x21, 0x40), + _INIT_CMD(0x00, 0x22, 0x40), + _INIT_CMD(0x00, 0x23, 0x40), + _INIT_CMD(0x00, 0x24, 0x40), + _INIT_CMD(0x00, 0x25, 0x40), + _INIT_CMD(0x00, 0x26, 0x40), + _INIT_CMD(0x00, 0x27, 0x40), + _INIT_CMD(0x00, 0x28, 0x40), + _INIT_CMD(0x00, 0x2D, 0x00), + _INIT_CMD(0x00, 0x2F, 0x40), + _INIT_CMD(0x00, 0x30, 0x40), + _INIT_CMD(0x00, 0x31, 0x40), + _INIT_CMD(0x00, 0x32, 0x40), + _INIT_CMD(0x00, 0x33, 0x40), + _INIT_CMD(0x00, 0x34, 0x40), + _INIT_CMD(0x00, 0x35, 0x40), + _INIT_CMD(0x00, 0x36, 0x40), + _INIT_CMD(0x00, 0x37, 0x40), + _INIT_CMD(0x00, 0x38, 0x40), + _INIT_CMD(0x00, 0x39, 0x40), + _INIT_CMD(0x00, 0x3A, 0x40), + _INIT_CMD(0x00, 0x3B, 0x40), + _INIT_CMD(0x00, 0x3D, 0x40), + _INIT_CMD(0x00, 0x3F, 0x40), + _INIT_CMD(0x00, 0x40, 0x40), + _INIT_CMD(0x00, 0x41, 0x40), + _INIT_CMD(0x00, 0x42, 0x40), + _INIT_CMD(0x00, 0x43, 0x40), + _INIT_CMD(0x00, 0x44, 0x40), + _INIT_CMD(0x00, 0x45, 0x40), + _INIT_CMD(0x00, 0x46, 0x40), + _INIT_CMD(0x00, 0x47, 0x40), + _INIT_CMD(0x00, 0x48, 0x40), + _INIT_CMD(0x00, 0x49, 0x40), + _INIT_CMD(0x00, 0x4A, 0x40), + _INIT_CMD(0x00, 0x4B, 0x40), + _INIT_CMD(0x00, 0x4C, 0x40), + _INIT_CMD(0x00, 0x4D, 0x40), + _INIT_CMD(0x00, 0x4E, 0x40), + _INIT_CMD(0x00, 0x4F, 0x40), + _INIT_CMD(0x00, 0x50, 0x40), + _INIT_CMD(0x00, 0x51, 0x40), + _INIT_CMD(0x00, 0x52, 0x40), + _INIT_CMD(0x00, 0x53, 0x01), + _INIT_CMD(0x00, 0x54, 0x01), + _INIT_CMD(0x00, 0x55, 0xFE), + _INIT_CMD(0x00, 0x56, 0x77), + _INIT_CMD(0x00, 0x58, 0xCD), + _INIT_CMD(0x00, 0x59, 0xD0), + _INIT_CMD(0x00, 0x5A, 0xD0), + _INIT_CMD(0x00, 0x5B, 0x50), + _INIT_CMD(0x00, 0x5C, 0x50), + _INIT_CMD(0x00, 0x5D, 0x50), + _INIT_CMD(0x00, 0x5E, 0x50), + _INIT_CMD(0x00, 0x5F, 0x50), + _INIT_CMD(0x00, 0x60, 0x50), + _INIT_CMD(0x00, 0x61, 0x50), + _INIT_CMD(0x00, 0x62, 0x50), + _INIT_CMD(0x00, 0x63, 0x50), + _INIT_CMD(0x00, 0x64, 0x50), + _INIT_CMD(0x00, 0x65, 0x50), + _INIT_CMD(0x00, 0x66, 0x50), + _INIT_CMD(0x00, 0x67, 0x50), + _INIT_CMD(0x00, 0x68, 0x50), + _INIT_CMD(0x00, 0x69, 0x50), + _INIT_CMD(0x00, 0x6A, 0x50), + _INIT_CMD(0x00, 0x6B, 0x50), + _INIT_CMD(0x00, 0x6C, 0x50), + _INIT_CMD(0x00, 0x6D, 0x50), + _INIT_CMD(0x00, 0x6E, 0x50), + _INIT_CMD(0x00, 0x6F, 0x50), + _INIT_CMD(0x00, 0x70, 0x07), + _INIT_CMD(0x00, 0x71, 0x00), + _INIT_CMD(0x00, 0x72, 0x00), + _INIT_CMD(0x00, 0x73, 0x00), + _INIT_CMD(0x00, 0x74, 0x06), + _INIT_CMD(0x00, 0x75, 0x0C), + _INIT_CMD(0x00, 0x76, 0x03), + _INIT_CMD(0x00, 0x77, 0x09), + _INIT_CMD(0x00, 0x78, 0x0F), + _INIT_CMD(0x00, 0x79, 0x68), + _INIT_CMD(0x00, 0x7A, 0x88), + _INIT_CMD(0x00, 0x7C, 0x80), + _INIT_CMD(0x00, 0x7D, 0x80), + _INIT_CMD(0x00, 0x7E, 0x80), + _INIT_CMD(0x00, 0x7F, 0x00), + _INIT_CMD(0x00, 0x80, 0x00), + _INIT_CMD(0x00, 0x81, 0x00), + _INIT_CMD(0x00, 0x83, 0x01), + _INIT_CMD(0x00, 0x84, 0x00), + _INIT_CMD(0x00, 0x85, 0x80), + _INIT_CMD(0x00, 0x86, 0x80), + _INIT_CMD(0x00, 0x87, 0x80), + _INIT_CMD(0x00, 0x88, 0x40), + _INIT_CMD(0x00, 0x89, 0x91), + _INIT_CMD(0x00, 0x8A, 0x98), + _INIT_CMD(0x00, 0x8B, 0x80), + _INIT_CMD(0x00, 0x8C, 0x80), + _INIT_CMD(0x00, 0x8D, 0x80), + _INIT_CMD(0x00, 0x8E, 0x80), + _INIT_CMD(0x00, 0x8F, 0x80), + _INIT_CMD(0x00, 0x90, 0x80), + _INIT_CMD(0x00, 0x91, 0x80), + _INIT_CMD(0x00, 0x92, 0x80), + _INIT_CMD(0x00, 0x93, 0x80), + _INIT_CMD(0x00, 0x94, 0x80), + _INIT_CMD(0x00, 0x95, 0x80), + _INIT_CMD(0x00, 0x96, 0x80), + _INIT_CMD(0x00, 0x97, 0x80), + _INIT_CMD(0x00, 0x98, 0x80), + _INIT_CMD(0x00, 0x99, 0x80), + _INIT_CMD(0x00, 0x9A, 0x80), + _INIT_CMD(0x00, 0x9B, 0x80), + _INIT_CMD(0x00, 0x9C, 0x80), + _INIT_CMD(0x00, 0x9D, 0x80), + _INIT_CMD(0x00, 0x9E, 0x80), + _INIT_CMD(0x00, 0x9F, 0x80), + _INIT_CMD(0x00, 0xA0, 0x8A), + _INIT_CMD(0x00, 0xA2, 0x80), + _INIT_CMD(0x00, 0xA6, 0x80), + _INIT_CMD(0x00, 0xA7, 0x80), + _INIT_CMD(0x00, 0xA9, 0x80), + _INIT_CMD(0x00, 0xAA, 0x80), + _INIT_CMD(0x00, 0xAB, 0x80), + _INIT_CMD(0x00, 0xAC, 0x80), + _INIT_CMD(0x00, 0xAD, 0x80), + _INIT_CMD(0x00, 0xAE, 0x80), + _INIT_CMD(0x00, 0xAF, 0x80), + _INIT_CMD(0x00, 0xB7, 0x76), + _INIT_CMD(0x00, 0xB8, 0x76), + _INIT_CMD(0x00, 0xB9, 0x05), + _INIT_CMD(0x00, 0xBA, 0x0D), + _INIT_CMD(0x00, 0xBB, 0x14), + _INIT_CMD(0x00, 0xBC, 0x0F), + _INIT_CMD(0x00, 0xBD, 0x18), + _INIT_CMD(0x00, 0xBE, 0x1F), + _INIT_CMD(0x00, 0xBF, 0x05), + _INIT_CMD(0x00, 0xC0, 0x0D), + _INIT_CMD(0x00, 0xC1, 0x14), + _INIT_CMD(0x00, 0xC2, 0x03), + _INIT_CMD(0x00, 0xC3, 0x07), + _INIT_CMD(0x00, 0xC4, 0x0A), + _INIT_CMD(0x00, 0xC5, 0xA0), + _INIT_CMD(0x00, 0xC6, 0x55), + _INIT_CMD(0x00, 0xC7, 0xFF), + _INIT_CMD(0x00, 0xC8, 0x39), + _INIT_CMD(0x00, 0xC9, 0x44), + _INIT_CMD(0x00, 0xCA, 0x12), + _INIT_CMD(0x00, 0xCD, 0x80), + _INIT_CMD(0x00, 0xDB, 0x80), + _INIT_CMD(0x00, 0xDC, 0x80), + _INIT_CMD(0x00, 0xDD, 0x80), + _INIT_CMD(0x00, 0xE0, 0x80), + _INIT_CMD(0x00, 0xE1, 0x80), + _INIT_CMD(0x00, 0xE2, 0x80), + _INIT_CMD(0x00, 0xE3, 0x80), + _INIT_CMD(0x00, 0xE4, 0x80), + _INIT_CMD(0x00, 0xE5, 0x40), + _INIT_CMD(0x00, 0xE6, 0x40), + _INIT_CMD(0x00, 0xE7, 0x40), + _INIT_CMD(0x00, 0xE8, 0x40), + _INIT_CMD(0x00, 0xE9, 0x40), + _INIT_CMD(0x00, 0xEA, 0x40), + _INIT_CMD(0x00, 0xEB, 0x40), + _INIT_CMD(0x00, 0xEC, 0x40), + _INIT_CMD(0x00, 0xED, 0x40), + _INIT_CMD(0x00, 0xEE, 0x40), + _INIT_CMD(0x00, 0xEF, 0x40), + _INIT_CMD(0x00, 0xF0, 0x40), + _INIT_CMD(0x00, 0xF1, 0x40), + _INIT_CMD(0x00, 0xF2, 0x40), + _INIT_CMD(0x00, 0xF3, 0x40), + _INIT_CMD(0x00, 0xF4, 0x40), + _INIT_CMD(0x00, 0xF5, 0x40), + _INIT_CMD(0x00, 0xF6, 0x40), + _INIT_CMD(0x00, 0xFB, 0x1), + _INIT_CMD(0x00, 0xFF, 0x23), + _INIT_CMD(0x00, 0xFB, 0x01), + /* dimming enable */ + _INIT_CMD(0x00, 0x01, 0x84), + _INIT_CMD(0x00, 0x05, 0x2D), + _INIT_CMD(0x00, 0x06, 0x00), + /* resolution 1080*2246 */ + _INIT_CMD(0x00, 0x11, 0x01), + _INIT_CMD(0x00, 0x12, 0x7B), + _INIT_CMD(0x00, 0x15, 0x6F), + _INIT_CMD(0x00, 0x16, 0x0B), + /* UI mode */ + _INIT_CMD(0x00, 0x29, 0x0A), + _INIT_CMD(0x00, 0x30, 0xFF), + _INIT_CMD(0x00, 0x31, 0xFF), + _INIT_CMD(0x00, 0x32, 0xFF), + _INIT_CMD(0x00, 0x33, 0xFF), + _INIT_CMD(0x00, 0x34, 0xFF), + _INIT_CMD(0x00, 0x35, 0xFF), + _INIT_CMD(0x00, 0x36, 0xFF), + _INIT_CMD(0x00, 0x37, 0xFF), + _INIT_CMD(0x00, 0x38, 0xFC), + _INIT_CMD(0x00, 0x39, 0xF8), + _INIT_CMD(0x00, 0x3A, 0xF4), + _INIT_CMD(0x00, 0x3B, 0xF1), + _INIT_CMD(0x00, 0x3D, 0xEE), + _INIT_CMD(0x00, 0x3F, 0xEB), + _INIT_CMD(0x00, 0x40, 0xE8), + _INIT_CMD(0x00, 0x41, 0xE5), + /* STILL mode */ + _INIT_CMD(0x00, 0x2A, 0x13), + _INIT_CMD(0x00, 0x45, 0xFF), + _INIT_CMD(0x00, 0x46, 0xFF), + _INIT_CMD(0x00, 0x47, 0xFF), + _INIT_CMD(0x00, 0x48, 0xFF), + _INIT_CMD(0x00, 0x49, 0xFF), + _INIT_CMD(0x00, 0x4A, 0xFF), + _INIT_CMD(0x00, 0x4B, 0xFF), + _INIT_CMD(0x00, 0x4C, 0xFF), + _INIT_CMD(0x00, 0x4D, 0xED), + _INIT_CMD(0x00, 0x4E, 0xD5), + _INIT_CMD(0x00, 0x4F, 0xBF), + _INIT_CMD(0x00, 0x50, 0xA6), + _INIT_CMD(0x00, 0x51, 0x96), + _INIT_CMD(0x00, 0x52, 0x86), + _INIT_CMD(0x00, 0x53, 0x76), + _INIT_CMD(0x00, 0x54, 0x66), + /* MOVING mode */ + _INIT_CMD(0x00, 0x2B, 0x0E), + _INIT_CMD(0x00, 0x58, 0xFF), + _INIT_CMD(0x00, 0x59, 0xFF), + _INIT_CMD(0x00, 0x5A, 0xFF), + _INIT_CMD(0x00, 0x5B, 0xFF), + _INIT_CMD(0x00, 0x5C, 0xFF), + _INIT_CMD(0x00, 0x5D, 0xFF), + _INIT_CMD(0x00, 0x5E, 0xFF), + _INIT_CMD(0x00, 0x5F, 0xFF), + _INIT_CMD(0x00, 0x60, 0xF6), + _INIT_CMD(0x00, 0x61, 0xEA), + _INIT_CMD(0x00, 0x62, 0xE1), + _INIT_CMD(0x00, 0x63, 0xD8), + _INIT_CMD(0x00, 0x64, 0xCE), + _INIT_CMD(0x00, 0x65, 0xC3), + _INIT_CMD(0x00, 0x66, 0xBA), + _INIT_CMD(0x00, 0x67, 0xB3), + _INIT_CMD(0x00, 0xFF, 0x25), + _INIT_CMD(0x00, 0xFB, 0x01), + _INIT_CMD(0x00, 0x05, 0x04), + _INIT_CMD(0x00, 0xFF, 0x26), + _INIT_CMD(0x00, 0xFB, 0x01), + _INIT_CMD(0x00, 0x1C, 0xAF), + _INIT_CMD(0x00, 0xFF, 0x10), + _INIT_CMD(0x00, 0xFB, 0x01), + _INIT_CMD(0x00, 0x51, 0xFF), + _INIT_CMD(0x00, 0x53, 0x24), + _INIT_CMD(0x00, 0x55, 0x00), + + {}, +}; + +static const struct panel_cmd tianma_fhd_video_on_cmds_2[] = { + _INIT_CMD(0x00, 0xFF, 0x24), + _INIT_CMD(0x00, 0xFB, 0x01), + _INIT_CMD(0x00, 0xC3, 0x01), + _INIT_CMD(0x00, 0xC4, 0x54), + _INIT_CMD(0x00, 0xFF, 0x10), + + {}, +}; + +static const struct panel_cmd tianma_fhd_video_off_cmds[] = { + _INIT_CMD(0x00, 0xFF, 0x24), + _INIT_CMD(0x00, 0xFB, 0x01), + _INIT_CMD(0x00, 0xC3, 0x01), + _INIT_CMD(0x00, 0xFF, 0x10), + + {}, +}; + +static const struct drm_display_mode tianma_fhd_video_panel_default_mode = { + .clock = 161331, + + .hdisplay = 1080, + .hsync_start = 1080 + 40, + .hsync_end = 1080 + 40 + 20, + .htotal = 1080 + 40 + 20 + 44, + + .vdisplay = 2246, + .vsync_start = 2246 + 15, + .vsync_end = 2246 + 15 + 2, + .vtotal = 2246 + 15 + 2 + 8, + + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc tianma_fhd_video_panel_desc = { + .display_mode = &tianma_fhd_video_panel_default_mode, + + .width_mm = 68, + .height_mm = 136, + + .mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO + | MIPI_DSI_MODE_VIDEO_HSE + | MIPI_DSI_CLOCK_NON_CONTINUOUS + | MIPI_DSI_MODE_VIDEO_BURST, + .format = MIPI_DSI_FMT_RGB888, + .lanes = 4, + .on_cmds_1 = tianma_fhd_video_on_cmds_1, + .on_cmds_2 = tianma_fhd_video_on_cmds_2, + .off_cmds = tianma_fhd_video_off_cmds +}; + +static int panel_add(struct panel_info *pinfo) +{ + struct device *dev = &pinfo->link->dev; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) + pinfo->supplies[i].supply = regulator_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies), + pinfo->supplies); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(pinfo->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), + "failed to get reset gpio from DT\n"); + + drm_panel_init(&pinfo->base, dev, &panel_funcs, DRM_MODE_CONNECTOR_DSI); + + drm_panel_add(&pinfo->base); + + return 0; +} + +static int panel_probe(struct mipi_dsi_device *dsi) +{ + struct panel_info *pinfo; + const struct panel_desc *desc; + int err; + + pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + desc = of_device_get_match_data(&dsi->dev); + dsi->mode_flags = desc->mode_flags; + dsi->format = desc->format; + dsi->lanes = desc->lanes; + pinfo->desc = desc; + pinfo->link = dsi; + + mipi_dsi_set_drvdata(dsi, pinfo); + + err = panel_add(pinfo); + if (err < 0) + return err; + + return mipi_dsi_attach(dsi); +} + +static int panel_remove(struct mipi_dsi_device *dsi) +{ + struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi); + int err; + + err = drm_panel_unprepare(&pinfo->base); + if (err < 0) + dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err); + + err = drm_panel_disable(&pinfo->base); + if (err < 0) + dev_err(&dsi->dev, "failed to disable panel: %d\n", err); + + err = mipi_dsi_detach(dsi); + if (err < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); + + drm_panel_remove(&pinfo->base); + + return 0; +} + +static void panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi); + + drm_panel_disable(&pinfo->base); + drm_panel_unprepare(&pinfo->base); +} + +static const struct of_device_id tianma_fhd_video_of_match[] = { + { .compatible = "tianma,fhd-video", + .data = &tianma_fhd_video_panel_desc + }, + { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, tianma_fhd_video_of_match); + +static struct mipi_dsi_driver panel_driver = { + .driver = { + .name = "panel-tianma-nt36672a", + .of_match_table = tianma_fhd_video_of_match, + }, + .probe = panel_probe, + .remove = panel_remove, + .shutdown = panel_shutdown, +}; +module_mipi_dsi_driver(panel_driver); + +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); +MODULE_DESCRIPTION("NOVATEK NT36672A based MIPI-DSI LCD panel driver"); +MODULE_LICENSE("GPL"); -- 2.28.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver 2020-08-31 13:02 ` [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver Sumit Semwal @ 2020-08-31 19:15 ` Bjorn Andersson 0 siblings, 0 replies; 4+ messages in thread From: Bjorn Andersson @ 2020-08-31 19:15 UTC (permalink / raw) To: Sumit Semwal Cc: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Mauro Carvalho Chehab, David S . Miller, Rob Herring, linux-kernel, dri-devel, devicetree, Benni Steini On Mon 31 Aug 13:02 UTC 2020, Sumit Semwal wrote: > Novatek NT36672a is a generic DSI IC that drives command and video mode > panels. Add the driver for it. > > Right now adding support for some Poco F1 phones that have an LCD panel > from Tianma connected with this IC, with a resolution of 1080x2246 that > operates in DSI video mode. > > During testing, Benni Steini <bennisteinir@gmail.com> helped us fix > the reset sequence timing (from 10ms to 20ms), to get the bootanimation > to work on Android. > > With current AOSP, we need to increase it to 200ms - this seems to be a > safe high value to avoid a white screen occasionally. > > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > Cc: Benni Steini <bennisteinir@gmail.com> > > --- > v2: increase reset sequence timing to a safe 200ms > v4: Since "0425662fdf05: drm: Nuke mode->vrefresh", we have to calculate > vrefresh on demand. Update for it. > v5: Fixed review comments from Sam: > - rebased on top of drm-misc-next > remove return of drm_panel_add() > remove drm_panel_detach() > - renamed the panel driver file to reflect that this is a novatek > nt36672a display driver and not only for tianma panels. > Adjusted some internal names also to reflect the same. > - corrected changelog to add info about the generic Novatek DSI IC > - corrected compatible string accordingly > - removed pinctrl > - used drm_panel* API for prepare/unprepare/disable/remove > v6: Fixed few review comments on v5 from Sam: > - add dev_err_probe() support > - move DRM_* error printing to dev_err() > - removed a few unnecessary bits > --- > MAINTAINERS | 7 + > drivers/gpu/drm/panel/Kconfig | 10 + > drivers/gpu/drm/panel/Makefile | 1 + > .../gpu/drm/panel/panel-novatek-nt36672a.c | 740 ++++++++++++++++++ > 4 files changed, 758 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36672a.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 01fb9ee6b951..aeecade2d65f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5619,6 +5619,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > F: Documentation/devicetree/bindings/display/ste,mcde.txt > F: drivers/gpu/drm/mcde/ > > +DRM DRIVER FOR TIANMA NT36672A PANELS > +M: Sumit Semwal <sumit.semwal@linaro.org> > +S: Maintained > +T: git git://anongit.freedesktop.org/drm/drm-misc > +F: Documentation/devicetree/bindings/display/panel/tianma,nt36672a-panel.yaml > +F: drivers/gpu/drm/panel/panel-tianma-nt36672a.c > + > DRM DRIVER FOR TDFX VIDEO CARDS > S: Orphan / Obsolete > F: drivers/gpu/drm/tdfx/ > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 8d97d07c5871..02600f12a063 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -208,6 +208,16 @@ config DRM_PANEL_NOVATEK_NT35510 > around the Novatek NT35510 display controller, such as some > Hydis panels. > > +config DRM_PANEL_NOVATEK_NT36672A > + tristate "Novatek NT36672A DSI panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for the panels built > + around the Novatek NT36672A display controller, such as some > + Tianma panels used in a few Xiaomi Poco F1 mobile phone. > + > config DRM_PANEL_NOVATEK_NT39016 > tristate "Novatek NT39016 RGB/SPI panel" > depends on OF && SPI > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 15a4e7752951..4a36eb45f670 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -19,6 +19,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o > obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o > obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o > obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o > +obj-$(CONFIG_DRM_PANEL_NOVATEK_NT36672A) += panel-novatek-nt36672a.o > obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o > obj-$(CONFIG_DRM_PANEL_MANTIX_MLAF057WE51) += panel-mantix-mlaf057we51.o > obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o > diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c > new file mode 100644 > index 000000000000..675e9d52f3c4 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c > @@ -0,0 +1,740 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (C) 2020 Linaro Ltd > + * Author: Sumit Semwal <sumit.semwal@linaro.org> > + * > + * This driver is for the DSI interface to panels using the NT36672A display driver IC > + * from Novatek. > + * Currently supported are the Tianma FHD+ panels found in some Xiaomi phones, including > + * some variants of the Poco F1 phone. > + * > + * Panels using the Novatek NT37762A IC should add appropriate configuration per-panel and > + * use this driver. > + */ > + > +#include <linux/delay.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > + > +#include <linux/gpio/consumer.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_device.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > + > +#include <video/mipi_display.h> > + > +struct panel_cmd { > + size_t len; > + const char *data; > +}; > + > +#define _INIT_CMD(...) { \ > + .len = sizeof((char[]){__VA_ARGS__}), \ Afaict all uses of this macro passes 3 parameters, so .len will always be 3 here. > + .data = (char[]){__VA_ARGS__} } > + > +static const char * const regulator_names[] = { > + "vddio", > + "vddpos", > + "vddneg", > +}; > + > +static unsigned long const regulator_enable_loads[] = { > + 62000, > + 100000, > + 100000 > +}; > + > +static unsigned long const regulator_disable_loads[] = { > + 80, > + 100, > + 100 > +}; > + > +struct panel_desc { > + const struct drm_display_mode *display_mode; > + const char *panel_name; > + > + unsigned int width_mm; > + unsigned int height_mm; > + > + unsigned long mode_flags; > + enum mipi_dsi_pixel_format format; > + unsigned int lanes; > + > + const struct panel_cmd *on_cmds_1; > + const struct panel_cmd *on_cmds_2; > + > + const struct panel_cmd *off_cmds; > +}; > + > +struct panel_info { > + struct drm_panel base; > + struct mipi_dsi_device *link; > + const struct panel_desc *desc; > + > + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)]; > + > + struct gpio_desc *reset_gpio; > + > + bool prepared; > +}; > + > +static inline struct panel_info *to_panel_info(struct drm_panel *panel) > +{ > + return container_of(panel, struct panel_info, base); > +} > + > +static int send_mipi_cmds(struct drm_panel *panel, const struct panel_cmd *cmds) This is a quite generic function name, as is all the structs declared above. > +{ > + struct panel_info *pinfo = to_panel_info(panel); > + unsigned int i = 0; No need to initialize i. > + int err; > + > + if (!cmds) I don't think can happen, seems overly defensive. > + return -EFAULT; > + > + for (i = 0; cmds[i].len != 0; i++) { > + const struct panel_cmd *cmd = &cmds[i]; > + > + if (cmd->len == 2) If I'm right about _INIT_CMD, then this will never happen. > + err = mipi_dsi_dcs_write(pinfo->link, > + cmd->data[1], NULL, 0); > + else > + err = mipi_dsi_dcs_write(pinfo->link, > + cmd->data[1], cmd->data + 2, > + cmd->len - 2); So you're never using cmd->data[0]? Why pass it in _INIT_CMD then? And if len is always 3, then this would imply that all these are just single byte writes to data[1]. > + > + if (err < 0) > + return err; > + } > + > + return 0; > +} > + > +static int novatek_panel_power_off(struct drm_panel *panel) > +{ > + struct panel_info *pinfo = to_panel_info(panel); > + int i, ret = 0; > + > + gpiod_set_value(pinfo->reset_gpio, 0); > + > + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) { > + ret = regulator_set_load(pinfo->supplies[i].consumer, > + regulator_disable_loads[i]); During regulator_disable() the aggregated load on the regulator will be recalculated, omitting the contribution of any disabled regulators. As such the disabled loads are not useful - and you can set the active load at probe time. > + if (ret) { > + dev_err(panel->dev, "regulator_set_load failed %d\n", ret); > + return ret; > + } > + } > + > + ret = regulator_bulk_disable(ARRAY_SIZE(pinfo->supplies), pinfo->supplies); > + if (ret) > + dev_err(panel->dev, "regulator_bulk_disable failed %d\n", ret); > + > + return ret; > +} > + > +static int nt36672a_panel_unprepare(struct drm_panel *panel) > +{ > + struct panel_info *pinfo = to_panel_info(panel); > + int ret; > + > + if (!pinfo->prepared) > + return 0; > + > + /* send off cmds */ > + ret = send_mipi_cmds(panel, pinfo->desc->off_cmds); > + > + if (ret < 0) > + dev_err(panel->dev, "failed to send DCS off cmds: %d\n", ret); > + > + ret = mipi_dsi_dcs_set_display_off(pinfo->link); > + if (ret < 0) > + dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret); > + > + /* 120ms delay required here as per DCS spec */ > + msleep(120); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(pinfo->link); > + if (ret < 0) > + dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret); > + > + /* 0x3C = 60ms delay */ > + msleep(60); > + > + ret = novatek_panel_power_off(panel); > + if (ret < 0) > + dev_err(panel->dev, "power_off failed ret = %d\n", ret); > + > + pinfo->prepared = false; > + > + return ret; > +} > + > +static int novatek_panel_power_on(struct panel_info *pinfo) > +{ > + int ret, i; > + > + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) { > + ret = regulator_set_load(pinfo->supplies[i].consumer, > + regulator_enable_loads[i]); > + if (ret) > + return ret; > + } > + > + ret = regulator_bulk_enable(ARRAY_SIZE(pinfo->supplies), pinfo->supplies); > + if (ret < 0) > + return ret; > + > + /* > + * As per downstream kernel, Reset sequence of Tianma FHD panel requires the panel to > + * be out of reset for 10ms, followed by being held in reset for 10ms. But for Android > + * AOSP, we needed to bump it upto 200ms otherwise we get white screen sometimes. > + * FIXME: Try to reduce this 200ms to a lesser value. > + */ > + gpiod_set_value(pinfo->reset_gpio, 0); > + msleep(200); > + gpiod_set_value(pinfo->reset_gpio, 1); > + msleep(200); > + > + return 0; > +} > + > +static int nt36672a_panel_prepare(struct drm_panel *panel) > +{ > + struct panel_info *pinfo = to_panel_info(panel); > + int err; > + > + if (pinfo->prepared) > + return 0; > + > + err = novatek_panel_power_on(pinfo); > + if (err < 0) > + goto poweroff; > + > + /* send first part of init cmds */ > + err = send_mipi_cmds(panel, pinfo->desc->on_cmds_1); > + > + if (err < 0) { > + dev_err(panel->dev, "failed to send DCS Init 1st Code: %d\n", err); > + goto poweroff; > + } > + > + err = mipi_dsi_dcs_exit_sleep_mode(pinfo->link); > + if (err < 0) { > + dev_err(panel->dev, "failed to exit sleep mode: %d\n", err); > + goto poweroff; > + } > + > + /* 0x46 = 70 ms delay */ > + msleep(70); > + > + err = mipi_dsi_dcs_set_display_on(pinfo->link); > + if (err < 0) { > + dev_err(panel->dev, "failed to Set Display ON: %d\n", err); > + goto poweroff; > + } > + > + /* Send rest of the init cmds */ > + err = send_mipi_cmds(panel, pinfo->desc->on_cmds_2); > + > + if (err < 0) { > + dev_err(panel->dev, "failed to send DCS Init 2nd Code: %d\n", err); > + goto poweroff; > + } > + > + msleep(120); > + > + pinfo->prepared = true; > + > + return 0; > + > +poweroff: > + gpiod_set_value(pinfo->reset_gpio, 1); > + return err; > +} > + > +static int nt36672a_panel_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct panel_info *pinfo = to_panel_info(panel); > + const struct drm_display_mode *m = pinfo->desc->display_mode; > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(connector->dev, m); > + if (!mode) { > + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", m->hdisplay, > + m->vdisplay, drm_mode_vrefresh(m)); > + return -ENOMEM; > + } > + > + connector->display_info.width_mm = pinfo->desc->width_mm; > + connector->display_info.height_mm = pinfo->desc->height_mm; > + > + drm_mode_set_name(mode); > + drm_mode_probed_add(connector, mode); > + > + return 1; > +} > + > +static const struct drm_panel_funcs panel_funcs = { > + .unprepare = nt36672a_panel_unprepare, > + .prepare = nt36672a_panel_prepare, > + .get_modes = nt36672a_panel_get_modes, > +}; > + > +static const struct panel_cmd tianma_fhd_video_on_cmds_1[] = { > + /* skin enhancement mode */ > + _INIT_CMD(0x00, 0xFF, 0x22), Given that these are all the same size, I think you should avoid using a macro for the initialization. > + _INIT_CMD(0x00, 0x00, 0x40), > + _INIT_CMD(0x00, 0x01, 0xC0), > + _INIT_CMD(0x00, 0x02, 0x40), > + _INIT_CMD(0x00, 0x03, 0x40), > + _INIT_CMD(0x00, 0x04, 0x40), > + _INIT_CMD(0x00, 0x05, 0x40), > + _INIT_CMD(0x00, 0x06, 0x40), > + _INIT_CMD(0x00, 0x07, 0x40), > + _INIT_CMD(0x00, 0x08, 0x40), > + _INIT_CMD(0x00, 0x09, 0x40), > + _INIT_CMD(0x00, 0x0A, 0x40), > + _INIT_CMD(0x00, 0x0B, 0x40), > + _INIT_CMD(0x00, 0x0C, 0x40), > + _INIT_CMD(0x00, 0x0D, 0x40), > + _INIT_CMD(0x00, 0x0E, 0x40), > + _INIT_CMD(0x00, 0x0F, 0x40), > + _INIT_CMD(0x00, 0x10, 0x40), > + _INIT_CMD(0x00, 0x11, 0x50), > + _INIT_CMD(0x00, 0x12, 0x60), > + _INIT_CMD(0x00, 0x13, 0x70), > + _INIT_CMD(0x00, 0x14, 0x58), > + _INIT_CMD(0x00, 0x15, 0x68), > + _INIT_CMD(0x00, 0x16, 0x78), > + _INIT_CMD(0x00, 0x17, 0x77), > + _INIT_CMD(0x00, 0x18, 0x39), > + _INIT_CMD(0x00, 0x19, 0x2D), > + _INIT_CMD(0x00, 0x1A, 0x2E), > + _INIT_CMD(0x00, 0x1B, 0x32), > + _INIT_CMD(0x00, 0x1C, 0x37), > + _INIT_CMD(0x00, 0x1D, 0x3A), > + _INIT_CMD(0x00, 0x1E, 0x40), > + _INIT_CMD(0x00, 0x1F, 0x40), > + _INIT_CMD(0x00, 0x20, 0x40), > + _INIT_CMD(0x00, 0x21, 0x40), > + _INIT_CMD(0x00, 0x22, 0x40), > + _INIT_CMD(0x00, 0x23, 0x40), > + _INIT_CMD(0x00, 0x24, 0x40), > + _INIT_CMD(0x00, 0x25, 0x40), > + _INIT_CMD(0x00, 0x26, 0x40), > + _INIT_CMD(0x00, 0x27, 0x40), > + _INIT_CMD(0x00, 0x28, 0x40), > + _INIT_CMD(0x00, 0x2D, 0x00), > + _INIT_CMD(0x00, 0x2F, 0x40), > + _INIT_CMD(0x00, 0x30, 0x40), > + _INIT_CMD(0x00, 0x31, 0x40), > + _INIT_CMD(0x00, 0x32, 0x40), > + _INIT_CMD(0x00, 0x33, 0x40), > + _INIT_CMD(0x00, 0x34, 0x40), > + _INIT_CMD(0x00, 0x35, 0x40), > + _INIT_CMD(0x00, 0x36, 0x40), > + _INIT_CMD(0x00, 0x37, 0x40), > + _INIT_CMD(0x00, 0x38, 0x40), > + _INIT_CMD(0x00, 0x39, 0x40), > + _INIT_CMD(0x00, 0x3A, 0x40), > + _INIT_CMD(0x00, 0x3B, 0x40), > + _INIT_CMD(0x00, 0x3D, 0x40), > + _INIT_CMD(0x00, 0x3F, 0x40), > + _INIT_CMD(0x00, 0x40, 0x40), > + _INIT_CMD(0x00, 0x41, 0x40), > + _INIT_CMD(0x00, 0x42, 0x40), > + _INIT_CMD(0x00, 0x43, 0x40), > + _INIT_CMD(0x00, 0x44, 0x40), > + _INIT_CMD(0x00, 0x45, 0x40), > + _INIT_CMD(0x00, 0x46, 0x40), > + _INIT_CMD(0x00, 0x47, 0x40), > + _INIT_CMD(0x00, 0x48, 0x40), > + _INIT_CMD(0x00, 0x49, 0x40), > + _INIT_CMD(0x00, 0x4A, 0x40), > + _INIT_CMD(0x00, 0x4B, 0x40), > + _INIT_CMD(0x00, 0x4C, 0x40), > + _INIT_CMD(0x00, 0x4D, 0x40), > + _INIT_CMD(0x00, 0x4E, 0x40), > + _INIT_CMD(0x00, 0x4F, 0x40), > + _INIT_CMD(0x00, 0x50, 0x40), > + _INIT_CMD(0x00, 0x51, 0x40), > + _INIT_CMD(0x00, 0x52, 0x40), > + _INIT_CMD(0x00, 0x53, 0x01), > + _INIT_CMD(0x00, 0x54, 0x01), > + _INIT_CMD(0x00, 0x55, 0xFE), > + _INIT_CMD(0x00, 0x56, 0x77), > + _INIT_CMD(0x00, 0x58, 0xCD), > + _INIT_CMD(0x00, 0x59, 0xD0), > + _INIT_CMD(0x00, 0x5A, 0xD0), > + _INIT_CMD(0x00, 0x5B, 0x50), > + _INIT_CMD(0x00, 0x5C, 0x50), > + _INIT_CMD(0x00, 0x5D, 0x50), > + _INIT_CMD(0x00, 0x5E, 0x50), > + _INIT_CMD(0x00, 0x5F, 0x50), > + _INIT_CMD(0x00, 0x60, 0x50), > + _INIT_CMD(0x00, 0x61, 0x50), > + _INIT_CMD(0x00, 0x62, 0x50), > + _INIT_CMD(0x00, 0x63, 0x50), > + _INIT_CMD(0x00, 0x64, 0x50), > + _INIT_CMD(0x00, 0x65, 0x50), > + _INIT_CMD(0x00, 0x66, 0x50), > + _INIT_CMD(0x00, 0x67, 0x50), > + _INIT_CMD(0x00, 0x68, 0x50), > + _INIT_CMD(0x00, 0x69, 0x50), > + _INIT_CMD(0x00, 0x6A, 0x50), > + _INIT_CMD(0x00, 0x6B, 0x50), > + _INIT_CMD(0x00, 0x6C, 0x50), > + _INIT_CMD(0x00, 0x6D, 0x50), > + _INIT_CMD(0x00, 0x6E, 0x50), > + _INIT_CMD(0x00, 0x6F, 0x50), > + _INIT_CMD(0x00, 0x70, 0x07), > + _INIT_CMD(0x00, 0x71, 0x00), > + _INIT_CMD(0x00, 0x72, 0x00), > + _INIT_CMD(0x00, 0x73, 0x00), > + _INIT_CMD(0x00, 0x74, 0x06), > + _INIT_CMD(0x00, 0x75, 0x0C), > + _INIT_CMD(0x00, 0x76, 0x03), > + _INIT_CMD(0x00, 0x77, 0x09), > + _INIT_CMD(0x00, 0x78, 0x0F), > + _INIT_CMD(0x00, 0x79, 0x68), > + _INIT_CMD(0x00, 0x7A, 0x88), > + _INIT_CMD(0x00, 0x7C, 0x80), > + _INIT_CMD(0x00, 0x7D, 0x80), > + _INIT_CMD(0x00, 0x7E, 0x80), > + _INIT_CMD(0x00, 0x7F, 0x00), > + _INIT_CMD(0x00, 0x80, 0x00), > + _INIT_CMD(0x00, 0x81, 0x00), > + _INIT_CMD(0x00, 0x83, 0x01), > + _INIT_CMD(0x00, 0x84, 0x00), > + _INIT_CMD(0x00, 0x85, 0x80), > + _INIT_CMD(0x00, 0x86, 0x80), > + _INIT_CMD(0x00, 0x87, 0x80), > + _INIT_CMD(0x00, 0x88, 0x40), > + _INIT_CMD(0x00, 0x89, 0x91), > + _INIT_CMD(0x00, 0x8A, 0x98), > + _INIT_CMD(0x00, 0x8B, 0x80), > + _INIT_CMD(0x00, 0x8C, 0x80), > + _INIT_CMD(0x00, 0x8D, 0x80), > + _INIT_CMD(0x00, 0x8E, 0x80), > + _INIT_CMD(0x00, 0x8F, 0x80), > + _INIT_CMD(0x00, 0x90, 0x80), > + _INIT_CMD(0x00, 0x91, 0x80), > + _INIT_CMD(0x00, 0x92, 0x80), > + _INIT_CMD(0x00, 0x93, 0x80), > + _INIT_CMD(0x00, 0x94, 0x80), > + _INIT_CMD(0x00, 0x95, 0x80), > + _INIT_CMD(0x00, 0x96, 0x80), > + _INIT_CMD(0x00, 0x97, 0x80), > + _INIT_CMD(0x00, 0x98, 0x80), > + _INIT_CMD(0x00, 0x99, 0x80), > + _INIT_CMD(0x00, 0x9A, 0x80), > + _INIT_CMD(0x00, 0x9B, 0x80), > + _INIT_CMD(0x00, 0x9C, 0x80), > + _INIT_CMD(0x00, 0x9D, 0x80), > + _INIT_CMD(0x00, 0x9E, 0x80), > + _INIT_CMD(0x00, 0x9F, 0x80), > + _INIT_CMD(0x00, 0xA0, 0x8A), > + _INIT_CMD(0x00, 0xA2, 0x80), > + _INIT_CMD(0x00, 0xA6, 0x80), > + _INIT_CMD(0x00, 0xA7, 0x80), > + _INIT_CMD(0x00, 0xA9, 0x80), > + _INIT_CMD(0x00, 0xAA, 0x80), > + _INIT_CMD(0x00, 0xAB, 0x80), > + _INIT_CMD(0x00, 0xAC, 0x80), > + _INIT_CMD(0x00, 0xAD, 0x80), > + _INIT_CMD(0x00, 0xAE, 0x80), > + _INIT_CMD(0x00, 0xAF, 0x80), > + _INIT_CMD(0x00, 0xB7, 0x76), > + _INIT_CMD(0x00, 0xB8, 0x76), > + _INIT_CMD(0x00, 0xB9, 0x05), > + _INIT_CMD(0x00, 0xBA, 0x0D), > + _INIT_CMD(0x00, 0xBB, 0x14), > + _INIT_CMD(0x00, 0xBC, 0x0F), > + _INIT_CMD(0x00, 0xBD, 0x18), > + _INIT_CMD(0x00, 0xBE, 0x1F), > + _INIT_CMD(0x00, 0xBF, 0x05), > + _INIT_CMD(0x00, 0xC0, 0x0D), > + _INIT_CMD(0x00, 0xC1, 0x14), > + _INIT_CMD(0x00, 0xC2, 0x03), > + _INIT_CMD(0x00, 0xC3, 0x07), > + _INIT_CMD(0x00, 0xC4, 0x0A), > + _INIT_CMD(0x00, 0xC5, 0xA0), > + _INIT_CMD(0x00, 0xC6, 0x55), > + _INIT_CMD(0x00, 0xC7, 0xFF), > + _INIT_CMD(0x00, 0xC8, 0x39), > + _INIT_CMD(0x00, 0xC9, 0x44), > + _INIT_CMD(0x00, 0xCA, 0x12), > + _INIT_CMD(0x00, 0xCD, 0x80), > + _INIT_CMD(0x00, 0xDB, 0x80), > + _INIT_CMD(0x00, 0xDC, 0x80), > + _INIT_CMD(0x00, 0xDD, 0x80), > + _INIT_CMD(0x00, 0xE0, 0x80), > + _INIT_CMD(0x00, 0xE1, 0x80), > + _INIT_CMD(0x00, 0xE2, 0x80), > + _INIT_CMD(0x00, 0xE3, 0x80), > + _INIT_CMD(0x00, 0xE4, 0x80), > + _INIT_CMD(0x00, 0xE5, 0x40), > + _INIT_CMD(0x00, 0xE6, 0x40), > + _INIT_CMD(0x00, 0xE7, 0x40), > + _INIT_CMD(0x00, 0xE8, 0x40), > + _INIT_CMD(0x00, 0xE9, 0x40), > + _INIT_CMD(0x00, 0xEA, 0x40), > + _INIT_CMD(0x00, 0xEB, 0x40), > + _INIT_CMD(0x00, 0xEC, 0x40), > + _INIT_CMD(0x00, 0xED, 0x40), > + _INIT_CMD(0x00, 0xEE, 0x40), > + _INIT_CMD(0x00, 0xEF, 0x40), > + _INIT_CMD(0x00, 0xF0, 0x40), > + _INIT_CMD(0x00, 0xF1, 0x40), > + _INIT_CMD(0x00, 0xF2, 0x40), > + _INIT_CMD(0x00, 0xF3, 0x40), > + _INIT_CMD(0x00, 0xF4, 0x40), > + _INIT_CMD(0x00, 0xF5, 0x40), > + _INIT_CMD(0x00, 0xF6, 0x40), > + _INIT_CMD(0x00, 0xFB, 0x1), > + _INIT_CMD(0x00, 0xFF, 0x23), > + _INIT_CMD(0x00, 0xFB, 0x01), > + /* dimming enable */ > + _INIT_CMD(0x00, 0x01, 0x84), > + _INIT_CMD(0x00, 0x05, 0x2D), > + _INIT_CMD(0x00, 0x06, 0x00), > + /* resolution 1080*2246 */ > + _INIT_CMD(0x00, 0x11, 0x01), > + _INIT_CMD(0x00, 0x12, 0x7B), > + _INIT_CMD(0x00, 0x15, 0x6F), > + _INIT_CMD(0x00, 0x16, 0x0B), > + /* UI mode */ > + _INIT_CMD(0x00, 0x29, 0x0A), > + _INIT_CMD(0x00, 0x30, 0xFF), > + _INIT_CMD(0x00, 0x31, 0xFF), > + _INIT_CMD(0x00, 0x32, 0xFF), > + _INIT_CMD(0x00, 0x33, 0xFF), > + _INIT_CMD(0x00, 0x34, 0xFF), > + _INIT_CMD(0x00, 0x35, 0xFF), > + _INIT_CMD(0x00, 0x36, 0xFF), > + _INIT_CMD(0x00, 0x37, 0xFF), > + _INIT_CMD(0x00, 0x38, 0xFC), > + _INIT_CMD(0x00, 0x39, 0xF8), > + _INIT_CMD(0x00, 0x3A, 0xF4), > + _INIT_CMD(0x00, 0x3B, 0xF1), > + _INIT_CMD(0x00, 0x3D, 0xEE), > + _INIT_CMD(0x00, 0x3F, 0xEB), > + _INIT_CMD(0x00, 0x40, 0xE8), > + _INIT_CMD(0x00, 0x41, 0xE5), > + /* STILL mode */ > + _INIT_CMD(0x00, 0x2A, 0x13), > + _INIT_CMD(0x00, 0x45, 0xFF), > + _INIT_CMD(0x00, 0x46, 0xFF), > + _INIT_CMD(0x00, 0x47, 0xFF), > + _INIT_CMD(0x00, 0x48, 0xFF), > + _INIT_CMD(0x00, 0x49, 0xFF), > + _INIT_CMD(0x00, 0x4A, 0xFF), > + _INIT_CMD(0x00, 0x4B, 0xFF), > + _INIT_CMD(0x00, 0x4C, 0xFF), > + _INIT_CMD(0x00, 0x4D, 0xED), > + _INIT_CMD(0x00, 0x4E, 0xD5), > + _INIT_CMD(0x00, 0x4F, 0xBF), > + _INIT_CMD(0x00, 0x50, 0xA6), > + _INIT_CMD(0x00, 0x51, 0x96), > + _INIT_CMD(0x00, 0x52, 0x86), > + _INIT_CMD(0x00, 0x53, 0x76), > + _INIT_CMD(0x00, 0x54, 0x66), > + /* MOVING mode */ > + _INIT_CMD(0x00, 0x2B, 0x0E), > + _INIT_CMD(0x00, 0x58, 0xFF), > + _INIT_CMD(0x00, 0x59, 0xFF), > + _INIT_CMD(0x00, 0x5A, 0xFF), > + _INIT_CMD(0x00, 0x5B, 0xFF), > + _INIT_CMD(0x00, 0x5C, 0xFF), > + _INIT_CMD(0x00, 0x5D, 0xFF), > + _INIT_CMD(0x00, 0x5E, 0xFF), > + _INIT_CMD(0x00, 0x5F, 0xFF), > + _INIT_CMD(0x00, 0x60, 0xF6), > + _INIT_CMD(0x00, 0x61, 0xEA), > + _INIT_CMD(0x00, 0x62, 0xE1), > + _INIT_CMD(0x00, 0x63, 0xD8), > + _INIT_CMD(0x00, 0x64, 0xCE), > + _INIT_CMD(0x00, 0x65, 0xC3), > + _INIT_CMD(0x00, 0x66, 0xBA), > + _INIT_CMD(0x00, 0x67, 0xB3), > + _INIT_CMD(0x00, 0xFF, 0x25), > + _INIT_CMD(0x00, 0xFB, 0x01), > + _INIT_CMD(0x00, 0x05, 0x04), > + _INIT_CMD(0x00, 0xFF, 0x26), > + _INIT_CMD(0x00, 0xFB, 0x01), > + _INIT_CMD(0x00, 0x1C, 0xAF), > + _INIT_CMD(0x00, 0xFF, 0x10), > + _INIT_CMD(0x00, 0xFB, 0x01), > + _INIT_CMD(0x00, 0x51, 0xFF), > + _INIT_CMD(0x00, 0x53, 0x24), > + _INIT_CMD(0x00, 0x55, 0x00), > + > + {}, > +}; > + > +static const struct panel_cmd tianma_fhd_video_on_cmds_2[] = { > + _INIT_CMD(0x00, 0xFF, 0x24), > + _INIT_CMD(0x00, 0xFB, 0x01), > + _INIT_CMD(0x00, 0xC3, 0x01), > + _INIT_CMD(0x00, 0xC4, 0x54), > + _INIT_CMD(0x00, 0xFF, 0x10), > + > + {}, > +}; > + > +static const struct panel_cmd tianma_fhd_video_off_cmds[] = { > + _INIT_CMD(0x00, 0xFF, 0x24), > + _INIT_CMD(0x00, 0xFB, 0x01), > + _INIT_CMD(0x00, 0xC3, 0x01), > + _INIT_CMD(0x00, 0xFF, 0x10), > + > + {}, > +}; > + > +static const struct drm_display_mode tianma_fhd_video_panel_default_mode = { > + .clock = 161331, > + > + .hdisplay = 1080, > + .hsync_start = 1080 + 40, > + .hsync_end = 1080 + 40 + 20, > + .htotal = 1080 + 40 + 20 + 44, > + > + .vdisplay = 2246, > + .vsync_start = 2246 + 15, > + .vsync_end = 2246 + 15 + 2, > + .vtotal = 2246 + 15 + 2 + 8, > + > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, > +}; > + > +static const struct panel_desc tianma_fhd_video_panel_desc = { > + .display_mode = &tianma_fhd_video_panel_default_mode, > + > + .width_mm = 68, > + .height_mm = 136, > + > + .mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO > + | MIPI_DSI_MODE_VIDEO_HSE > + | MIPI_DSI_CLOCK_NON_CONTINUOUS > + | MIPI_DSI_MODE_VIDEO_BURST, > + .format = MIPI_DSI_FMT_RGB888, > + .lanes = 4, > + .on_cmds_1 = tianma_fhd_video_on_cmds_1, > + .on_cmds_2 = tianma_fhd_video_on_cmds_2, > + .off_cmds = tianma_fhd_video_off_cmds > +}; > + > +static int panel_add(struct panel_info *pinfo) These function names could be made less generic. Unifying the prefixes for the various functions in this driver would be beneficial imho. > +{ > + struct device *dev = &pinfo->link->dev; > + int i, ret; > + > + for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) > + pinfo->supplies[i].supply = regulator_names[i]; > + > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies), > + pinfo->supplies); > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed to get regulators\n"); > + > + pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); Given that you're driving reset low then leave it high in power_on it seems reset is active low. So while I expect this to work for you it would make logical sense to reverse this and make the code in power_on() say "reset enable, wait, reset disable" - and "reset enable" in power_off(). > + if (IS_ERR(pinfo->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), > + "failed to get reset gpio from DT\n"); > + > + drm_panel_init(&pinfo->base, dev, &panel_funcs, DRM_MODE_CONNECTOR_DSI); > + > + drm_panel_add(&pinfo->base); > + > + return 0; > +} > + > +static int panel_probe(struct mipi_dsi_device *dsi) > +{ > + struct panel_info *pinfo; > + const struct panel_desc *desc; > + int err; > + > + pinfo = devm_kzalloc(&dsi->dev, sizeof(*pinfo), GFP_KERNEL); > + if (!pinfo) > + return -ENOMEM; > + > + desc = of_device_get_match_data(&dsi->dev); > + dsi->mode_flags = desc->mode_flags; > + dsi->format = desc->format; > + dsi->lanes = desc->lanes; > + pinfo->desc = desc; > + pinfo->link = dsi; > + > + mipi_dsi_set_drvdata(dsi, pinfo); > + > + err = panel_add(pinfo); > + if (err < 0) > + return err; > + > + return mipi_dsi_attach(dsi); > +} > + > +static int panel_remove(struct mipi_dsi_device *dsi) > +{ > + struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi); > + int err; > + > + err = drm_panel_unprepare(&pinfo->base); > + if (err < 0) > + dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err); > + > + err = drm_panel_disable(&pinfo->base); > + if (err < 0) > + dev_err(&dsi->dev, "failed to disable panel: %d\n", err); > + > + err = mipi_dsi_detach(dsi); > + if (err < 0) > + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); > + > + drm_panel_remove(&pinfo->base); > + > + return 0; > +} > + > +static void panel_shutdown(struct mipi_dsi_device *dsi) > +{ > + struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi); > + > + drm_panel_disable(&pinfo->base); > + drm_panel_unprepare(&pinfo->base); > +} > + > +static const struct of_device_id tianma_fhd_video_of_match[] = { > + { .compatible = "tianma,fhd-video", > + .data = &tianma_fhd_video_panel_desc You don't need to line break this. > + }, > + { > + /* sentinel */ And you can omit this comment if you avoid the line breaks. Regards, Bjorn > + } > +}; > +MODULE_DEVICE_TABLE(of, tianma_fhd_video_of_match); > + > +static struct mipi_dsi_driver panel_driver = { > + .driver = { > + .name = "panel-tianma-nt36672a", > + .of_match_table = tianma_fhd_video_of_match, > + }, > + .probe = panel_probe, > + .remove = panel_remove, > + .shutdown = panel_shutdown, > +}; > +module_mipi_dsi_driver(panel_driver); > + > +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); > +MODULE_DESCRIPTION("NOVATEK NT36672A based MIPI-DSI LCD panel driver"); > +MODULE_LICENSE("GPL"); > -- > 2.28.0 > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-08-31 19:15 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-31 13:02 [PATCH v6 0/2] Add support for Tianma nt36672a video mode panel Sumit Semwal 2020-08-31 13:02 ` [PATCH v6 1/2] dt-bindings: display: panel: Add bindings for Novatek nt36672a Sumit Semwal 2020-08-31 13:02 ` [PATCH v6 2/2] drm: panel: Add novatek nt36672a panel driver Sumit Semwal 2020-08-31 19:15 ` Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).