[PATCH AUTOSEL 4.19 01/26] ARC: HSDK: wireup perf irq

[PATCH AUTOSEL 4.19 01/26] ARC: HSDK: wireup perf irq

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ]

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/hsdk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index d131c54acd3ec..ab01b75bfa67d 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -83,6 +83,8 @@ idu_intc: idu-interrupt-controller {
 
 	arcpct: pct {
 		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
 	};
 
 	/* TIMER0 with interrupt for clockevent */
-- 
2.25.1

[PATCH AUTOSEL 4.19 02/26] dmaengine: acpi: Put the CSRT table after using it

[Sasha Levin]

From: Hanjun Guo <guohanjun@huawei.com>

[ Upstream commit 7eb48dd094de5fe0e216b550e73aa85257903973 ]

The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping, put the CSRT table buf after using it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1595411661-15936-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/acpi-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
index 4a748c3435d7d..8d99c84361cbb 100644
--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -131,11 +131,13 @@ static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma)
 		if (ret < 0) {
 			dev_warn(&adev->dev,
 				 "error in parsing resource group\n");
-			return;
+			break;
 		}
 
 		grp = (struct acpi_csrt_group *)((void *)grp + grp->length);
 	}
+
+	acpi_put_table((struct acpi_table_header *)csrt);
 }
 
 /**
-- 
2.25.1

[PATCH AUTOSEL 4.19 03/26] netfilter: conntrack: allow sctp hearbeat after connection re-use

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit cc5453a5b7e90c39f713091a7ebc53c1f87d1700 ]

If an sctp connection gets re-used, heartbeats are flagged as invalid
because their vtag doesn't match.

Handle this in a similar way as TCP conntrack when it suspects that the
endpoints and conntrack are out-of-sync.

When a HEARTBEAT request fails its vtag validation, flag this in the
conntrack state and accept the packet.

When a HEARTBEAT_ACK is received with an invalid vtag in the reverse
direction after we allowed such a HEARTBEAT through, assume we are
out-of-sync and re-set the vtag info.

v2: remove left-over snippet from an older incarnation that moved
    new_state/old_state assignments, thats not needed so keep that
    as-is.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netfilter/nf_conntrack_sctp.h |  2 ++
 net/netfilter/nf_conntrack_proto_sctp.c     | 39 ++++++++++++++++++---
 2 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/include/linux/netfilter/nf_conntrack_sctp.h b/include/linux/netfilter/nf_conntrack_sctp.h
index 9a33f171aa822..625f491b95de8 100644
--- a/include/linux/netfilter/nf_conntrack_sctp.h
+++ b/include/linux/netfilter/nf_conntrack_sctp.h
@@ -9,6 +9,8 @@ struct ip_ct_sctp {
 	enum sctp_conntrack state;
 
 	__be32 vtag[IP_CT_DIR_MAX];
+	u8 last_dir;
+	u8 flags;
 };
 
 #endif /* _NF_CONNTRACK_SCTP_H */
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 7d7e30ea0ecf9..a937d4f75613f 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -65,6 +65,8 @@ static const unsigned int sctp_timeouts[SCTP_CONNTRACK_MAX] = {
 	[SCTP_CONNTRACK_HEARTBEAT_ACKED]	= 210 SECS,
 };
 
+#define	SCTP_FLAG_HEARTBEAT_VTAG_FAILED	1
+
 #define sNO SCTP_CONNTRACK_NONE
 #define	sCL SCTP_CONNTRACK_CLOSED
 #define	sCW SCTP_CONNTRACK_COOKIE_WAIT
@@ -288,6 +290,7 @@ static int sctp_packet(struct nf_conn *ct,
 	u_int32_t offset, count;
 	unsigned int *timeouts;
 	unsigned long map[256 / sizeof(unsigned long)] = { 0 };
+	bool ignore = false;
 
 	sh = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph);
 	if (sh == NULL)
@@ -332,15 +335,39 @@ static int sctp_packet(struct nf_conn *ct,
 			/* Sec 8.5.1 (D) */
 			if (sh->vtag != ct->proto.sctp.vtag[dir])
 				goto out_unlock;
-		} else if (sch->type == SCTP_CID_HEARTBEAT ||
-			   sch->type == SCTP_CID_HEARTBEAT_ACK) {
+		} else if (sch->type == SCTP_CID_HEARTBEAT) {
+			if (ct->proto.sctp.vtag[dir] == 0) {
+				pr_debug("Setting %d vtag %x for dir %d\n", sch->type, sh->vtag, dir);
+				ct->proto.sctp.vtag[dir] = sh->vtag;
+			} else if (sh->vtag != ct->proto.sctp.vtag[dir]) {
+				if (test_bit(SCTP_CID_DATA, map) || ignore)
+					goto out_unlock;
+
+				ct->proto.sctp.flags |= SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+				ct->proto.sctp.last_dir = dir;
+				ignore = true;
+				continue;
+			} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
+				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+			}
+		} else if (sch->type == SCTP_CID_HEARTBEAT_ACK) {
 			if (ct->proto.sctp.vtag[dir] == 0) {
 				pr_debug("Setting vtag %x for dir %d\n",
 					 sh->vtag, dir);
 				ct->proto.sctp.vtag[dir] = sh->vtag;
 			} else if (sh->vtag != ct->proto.sctp.vtag[dir]) {
-				pr_debug("Verification tag check failed\n");
-				goto out_unlock;
+				if (test_bit(SCTP_CID_DATA, map) || ignore)
+					goto out_unlock;
+
+				if ((ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) == 0 ||
+				    ct->proto.sctp.last_dir == dir)
+					goto out_unlock;
+
+				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
+				ct->proto.sctp.vtag[dir] = sh->vtag;
+				ct->proto.sctp.vtag[!dir] = 0;
+			} else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) {
+				ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED;
 			}
 		}
 
@@ -375,6 +402,10 @@ static int sctp_packet(struct nf_conn *ct,
 	}
 	spin_unlock_bh(&ct->lock);
 
+	/* allow but do not refresh timeout */
+	if (ignore)
+		return NF_ACCEPT;
+
 	timeouts = nf_ct_timeout_lookup(ct);
 	if (!timeouts)
 		timeouts = sctp_pernet(nf_ct_net(ct))->timeouts;
-- 
2.25.1

[PATCH AUTOSEL 4.19 04/26] drivers/net/wan/lapbether: Added needed_tailroom

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ]

The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index c94dfa70f2a33..6b2553e893aca 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -343,6 +343,7 @@ static int lapbeth_new_device(struct net_device *dev)
 	 */
 	ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len
 					   + dev->needed_headroom;
+	ndev->needed_tailroom = dev->needed_tailroom;
 
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
-- 
2.25.1

[PATCH AUTOSEL 4.19 05/26] NFC: st95hf: Fix memleak in st95hf_in_send_cmd

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f97c04c316d8fea16dca449fdfbe101fbdfee6a2 ]

When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st95hf/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 01acb6e533655..c4b6e29c07192 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -981,7 +981,7 @@ static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev,
 	rc = down_killable(&stcontext->exchange_lock);
 	if (rc) {
 		WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n");
-		return rc;
+		goto free_skb_resp;
 	}
 
 	rc = st95hf_spi_send(&stcontext->spicontext, skb->data,
-- 
2.25.1

[PATCH AUTOSEL 4.19 06/26] firestream: Fix memleak in fs_open

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 15ac5cdafb9202424206dc5bd376437a358963f9 ]

When make_rate() fails, vcc should be freed just
like other error paths in fs_open().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/firestream.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 112b1001c2694..ef395b238816c 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1013,6 +1013,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 				error = make_rate (pcr, r, &tmc0, NULL);
 				if (error) {
 					kfree(tc);
+					kfree(vcc);
 					return error;
 				}
 			}
-- 
2.25.1

[PATCH AUTOSEL 4.19 07/26] ALSA: hda: Fix 2 channel swapping for Tegra

[Sasha Levin]

From: Mohan Kumar <mkumard@nvidia.com>

[ Upstream commit 216116eae43963c662eb84729507bad95214ca6b ]

The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 419d099b5582b..9bd697256e359 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3430,6 +3430,7 @@ static int tegra_hdmi_build_pcms(struct hda_codec *codec)
 
 static int patch_tegra_hdmi(struct hda_codec *codec)
 {
+	struct hdmi_spec *spec;
 	int err;
 
 	err = patch_generic_hdmi(codec);
@@ -3437,6 +3438,10 @@ static int patch_tegra_hdmi(struct hda_codec *codec)
 		return err;
 
 	codec->patch_ops.build_pcms = tegra_hdmi_build_pcms;
+	spec = codec->spec;
+	spec->chmap.ops.chmap_cea_alloc_validate_get_type =
+		nvhdmi_chmap_cea_alloc_validate_get_type;
+	spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate;
 
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 08/26] drivers/net/wan/lapbether: Set network_header before transmitting

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ]

Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 6b2553e893aca..15177a54b17d7 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -213,6 +213,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
 
 	skb->dev = dev = lapbeth->ethdev;
 
+	skb_reset_network_header(skb);
+
 	dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
 
 	dev_queue_xmit(skb);
-- 
2.25.1

[PATCH AUTOSEL 4.19 09/26] cfg80211: regulatory: reject invalid hints

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 47caf685a6854593348f216e0b489b71c10cbe03 ]

Reject invalid hints early in order to not cause a kernel
WARN later if they're restored to or similar.

Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee
Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 32f575857e415..935aebf150107 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2936,6 +2936,9 @@ int regulatory_hint_user(const char *alpha2,
 	if (WARN_ON(!alpha2))
 		return -EINVAL;
 
+	if (!is_world_regdom(alpha2) && !is_an_alpha2(alpha2))
+		return -EINVAL;
+
 	request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
 	if (!request)
 		return -ENOMEM;
-- 
2.25.1

[PATCH AUTOSEL 4.19 10/26] net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()

[Sasha Levin]

From: Himadri Pandya <himadrispandya@gmail.com>

[ Upstream commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc ]

The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.

Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 023b8d0bf1754..8d27786acad91 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -309,7 +309,7 @@ int asix_read_phy_addr(struct usbnet *dev, int internal)
 
 	netdev_dbg(dev->net, "asix_get_phy_addr()\n");
 
-	if (ret < 0) {
+	if (ret < 2) {
 		netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
 		goto out;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.19 11/26] xfs: initialize the shortform attr header padding entry

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 125eac243806e021f33a1fdea3687eccbb9f7636 ]

Don't leak kernel memory contents into the shortform attr fork.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_attr_leaf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c
index 2652d00842d6b..c7025e759bf2e 100644
--- a/fs/xfs/libxfs/xfs_attr_leaf.c
+++ b/fs/xfs/libxfs/xfs_attr_leaf.c
@@ -551,8 +551,8 @@ xfs_attr_shortform_create(xfs_da_args_t *args)
 		ASSERT(ifp->if_flags & XFS_IFINLINE);
 	}
 	xfs_idata_realloc(dp, sizeof(*hdr), XFS_ATTR_FORK);
-	hdr = (xfs_attr_sf_hdr_t *)ifp->if_u1.if_data;
-	hdr->count = 0;
+	hdr = (struct xfs_attr_sf_hdr *)ifp->if_u1.if_data;
+	memset(hdr, 0, sizeof(*hdr));
 	hdr->totsize = cpu_to_be16(sizeof(*hdr));
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA);
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 12/26] irqchip/eznps: Fix build error for !ARC700 builds

[Sasha Levin]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-eznps/include/plat/ctop.h | 1 -
 include/soc/nps/common.h                | 6 ++++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
index 4f6a1673b3a6e..ddfca2c3357a0 100644
--- a/arch/arc/plat-eznps/include/plat/ctop.h
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -43,7 +43,6 @@
 #define CTOP_AUX_DPC				(CTOP_AUX_BASE + 0x02C)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 
diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
index 9b1d43d671a3f..8c18dc6d3fde5 100644
--- a/include/soc/nps/common.h
+++ b/include/soc/nps/common.h
@@ -45,6 +45,12 @@
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM	0x00010422
 
+#ifndef AUX_IENABLE
+#define AUX_IENABLE				0x40c
+#endif
+
+#define CTOP_AUX_IACK				(0xFFFFF800 + 0x088)
+
 #ifndef __ASSEMBLY__
 
 /* In order to increase compilation test coverage */
-- 
2.25.1

[PATCH AUTOSEL 4.19 13/26] nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit d7144f5c4cf4de95fdc3422943cf51c06aeaf7a7 ]

NVME_CTRL_NEW should never see any I/O, because in order to start
initialization it has to transition to NVME_CTRL_CONNECTING and from
there it will never return to this state.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fabrics.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index bcd09d3a44dad..05dd46f984414 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -577,7 +577,6 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
 	 * which is require to set the queue live in the appropinquate states.
 	 */
 	switch (ctrl->state) {
-	case NVME_CTRL_NEW:
 	case NVME_CTRL_CONNECTING:
 		if (req->cmd->common.opcode == nvme_fabrics_command &&
 		    req->cmd->fabrics.fctype == nvme_fabrics_type_connect)
-- 
2.25.1

[PATCH AUTOSEL 4.19 14/26] nvme: have nvme_wait_freeze_timeout return if it timed out

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 7cf0d7c0f3c3b0203aaf81c1bc884924d8fdb9bd ]

Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 3 ++-
 drivers/nvme/host/nvme.h | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 0d60f2f8f3eec..1b0133564f0ca 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3726,7 +3726,7 @@ void nvme_unfreeze(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_unfreeze);
 
-void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout)
+int nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout)
 {
 	struct nvme_ns *ns;
 
@@ -3737,6 +3737,7 @@ void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout)
 			break;
 	}
 	up_read(&ctrl->namespaces_rwsem);
+	return timeout;
 }
 EXPORT_SYMBOL_GPL(nvme_wait_freeze_timeout);
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index cc4273f119894..9bada68b4bd0c 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -438,7 +438,7 @@ void nvme_start_queues(struct nvme_ctrl *ctrl);
 void nvme_kill_queues(struct nvme_ctrl *ctrl);
 void nvme_unfreeze(struct nvme_ctrl *ctrl);
 void nvme_wait_freeze(struct nvme_ctrl *ctrl);
-void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout);
+int nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout);
 void nvme_start_freeze(struct nvme_ctrl *ctrl);
 
 #define NVME_QID_ANY -1
-- 
2.25.1

[PATCH AUTOSEL 4.19 15/26] nvme-rdma: serialize controller teardown sequences

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 5110f40241d08334375eb0495f174b1d2c07657e ]

In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.

In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.

Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index f393a6193252e..7e2cdb17c26d8 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -118,6 +118,7 @@ struct nvme_rdma_ctrl {
 	struct sockaddr_storage src_addr;
 
 	struct nvme_ctrl	ctrl;
+	struct mutex		teardown_lock;
 	bool			use_inline_data;
 };
 
@@ -880,6 +881,7 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new)
 static void nvme_rdma_teardown_admin_queue(struct nvme_rdma_ctrl *ctrl,
 		bool remove)
 {
+	mutex_lock(&ctrl->teardown_lock);
 	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
 	if (ctrl->ctrl.admin_tagset)
@@ -887,11 +889,13 @@ static void nvme_rdma_teardown_admin_queue(struct nvme_rdma_ctrl *ctrl,
 			nvme_cancel_request, &ctrl->ctrl);
 	blk_mq_unquiesce_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_destroy_admin_queue(ctrl, remove);
+	mutex_unlock(&ctrl->teardown_lock);
 }
 
 static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl,
 		bool remove)
 {
+	mutex_lock(&ctrl->teardown_lock);
 	if (ctrl->ctrl.queue_count > 1) {
 		nvme_stop_queues(&ctrl->ctrl);
 		nvme_rdma_stop_io_queues(ctrl);
@@ -902,6 +906,7 @@ static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl,
 			nvme_start_queues(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, remove);
 	}
+	mutex_unlock(&ctrl->teardown_lock);
 }
 
 static void nvme_rdma_stop_ctrl(struct nvme_ctrl *nctrl)
@@ -1955,6 +1960,7 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev,
 		return ERR_PTR(-ENOMEM);
 	ctrl->ctrl.opts = opts;
 	INIT_LIST_HEAD(&ctrl->list);
+	mutex_init(&ctrl->teardown_lock);
 
 	if (opts->mask & NVMF_OPT_TRSVCID)
 		port = opts->trsvcid;
-- 
2.25.1

[PATCH AUTOSEL 4.19 16/26] HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices

[Sasha Levin]

From: Nirenjan Krishnan <nirenjan@gmail.com>

[ Upstream commit 77df710ba633dfb6c65c65cf99ea9e084a1c9933 ]

The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.

One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.

Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 2 ++
 drivers/hid/hid-quirks.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 2c100b73d3fc1..e18d796d985f8 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -985,6 +985,8 @@
 #define USB_DEVICE_ID_SAITEK_RAT9	0x0cfa
 #define USB_DEVICE_ID_SAITEK_MMO7	0x0cd0
 #define USB_DEVICE_ID_SAITEK_X52	0x075c
+#define USB_DEVICE_ID_SAITEK_X52_2	0x0255
+#define USB_DEVICE_ID_SAITEK_X52_PRO	0x0762
 
 #define USB_VENDOR_ID_SAMSUNG		0x0419
 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE	0x0001
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 62f87f8bd9720..2d8d20a7f4574 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -147,6 +147,8 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPORT), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD), HID_QUIRK_BADPAD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_2), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_PRO), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET },
-- 
2.25.1

[PATCH AUTOSEL 4.19 17/26] drivers/net/wan/hdlc_cisco: Add hard_header_len

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ]

This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.

This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc_cisco.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 320039d329c7d..c169a26e5359a 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -374,6 +374,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		memcpy(&state(hdlc)->settings, &new_settings, size);
 		spin_lock_init(&state(hdlc)->lock);
 		dev->header_ops = &cisco_header_ops;
+		dev->hard_header_len = sizeof(struct hdlc_header);
 		dev->type = ARPHRD_CISCO;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_on(dev);
-- 
2.25.1

[PATCH AUTOSEL 4.19 18/26] HID: elan: Fix memleak in elan_input_configured

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit b7429ea53d6c0936a0f10a5d64164f0aea440143 ]

When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-elan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-elan.c b/drivers/hid/hid-elan.c
index 07e26c3567eb9..6346282e0ff05 100644
--- a/drivers/hid/hid-elan.c
+++ b/drivers/hid/hid-elan.c
@@ -192,6 +192,7 @@ static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi)
 	ret = input_mt_init_slots(input, ELAN_MAX_FINGERS, INPUT_MT_POINTER);
 	if (ret) {
 		hid_err(hdev, "Failed to init elan MT slots: %d\n", ret);
+		input_free_device(input);
 		return ret;
 	}
 
@@ -202,6 +203,7 @@ static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi)
 	if (ret) {
 		hid_err(hdev, "Failed to register elan input device: %d\n",
 			ret);
+		input_mt_destroy_slots(input);
 		input_free_device(input);
 		return ret;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.19 19/26] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id

[Sasha Levin]

From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>

[ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ]

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/hsdk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index ab01b75bfa67d..f6b6e3c9ca8aa 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -175,7 +175,7 @@ gmac: ethernet@8000 {
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
@@ -193,7 +193,7 @@ mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 					reg = <0>;
 					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-- 
2.25.1

[PATCH AUTOSEL 4.19 20/26] cpufreq: intel_pstate: Refuse to turn off with HWP enabled

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 43298db3009f06fe5c69e1ca8b6cfc2565772fa1 ]

After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive
mode with HWP enabled") it is possible to change the driver status
to "off" via sysfs with HWP enabled, which effectively causes the
driver to unregister itself, but HWP remains active and it forces the
minimum performance, so even if another cpufreq driver is loaded,
it will not be able to control the CPU frequency.

For this reason, make the driver refuse to change the status to
"off" with HWP enabled.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 99166000ffb77..8fa22aa2ac65b 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -2325,9 +2325,15 @@ static int intel_pstate_update_status(const char *buf, size_t size)
 {
 	int ret;
 
-	if (size == 3 && !strncmp(buf, "off", size))
-		return intel_pstate_driver ?
-			intel_pstate_unregister_driver() : -EINVAL;
+	if (size == 3 && !strncmp(buf, "off", size)) {
+		if (!intel_pstate_driver)
+			return -EINVAL;
+
+		if (hwp_active)
+			return -EBUSY;
+
+		return intel_pstate_unregister_driver();
+	}
 
 	if (size == 6 && !strncmp(buf, "active", size)) {
 		if (intel_pstate_driver) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 21/26] cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled

[Sasha Levin]

From: Francisco Jerez <currojerez@riseup.net>

[ Upstream commit eacc9c5a927e474c173a5d53dd7fb8e306511768 ]

This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.

Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs.  This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.

Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 8fa22aa2ac65b..864a7e8ebdfc3 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -712,7 +712,7 @@ static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max,
 
 	rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap);
 	WRITE_ONCE(all_cpu_data[cpu]->hwp_cap_cached, cap);
-	if (global.no_turbo)
+	if (global.no_turbo || global.turbo_disabled)
 		*current_max = HWP_GUARANTEED_PERF(cap);
 	else
 		*current_max = HWP_HIGHEST_PERF(cap);
-- 
2.25.1

[PATCH AUTOSEL 4.19 22/26] net: usb: dm9601: Add USB ID of Keenetic Plus DSL

[Sasha Levin]

From: Kamil Lorenc <kamil@re-ws.pl>

[ Upstream commit a609d0259183a841621f252e067f40f8cc25d6f6 ]

Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface.

Signed-off-by: Kamil Lorenc <kamil@re-ws.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/dm9601.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index b91f92e4e5f22..915ac75b55fc7 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -625,6 +625,10 @@ static const struct usb_device_id products[] = {
 	 USB_DEVICE(0x0a46, 0x1269),	/* DM9621A USB to Fast Ethernet Adapter */
 	 .driver_info = (unsigned long)&dm9601_info,
 	},
+	{
+	 USB_DEVICE(0x0586, 0x3427),	/* ZyXEL Keenetic Plus DSL xDSL modem */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
 	{},			// END
 };
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 23/26] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled

[Sasha Levin]

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit 13774d81f38538c5fa2924bdcdfa509155480fa6 ]

In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.

This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_device.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index dbf02a3a8d2f2..58b53a4bc4d01 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -124,6 +124,8 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);
 void snd_hdac_device_exit(struct hdac_device *codec)
 {
 	pm_runtime_put_noidle(&codec->dev);
+	/* keep balance of runtime PM child_count in parent device */
+	pm_runtime_set_suspended(&codec->dev);
 	snd_hdac_bus_remove_device(codec->bus, codec);
 	kfree(codec->vendor_name);
 	kfree(codec->chip_name);
-- 
2.25.1

[PATCH AUTOSEL 4.19 24/26] drm/amdgpu: Fix bug in reporting voltage for CIK

[Sasha Levin]

From: Sandeep Raghuraman <sandy.8925@gmail.com>

[ Upstream commit d98299885c9ea140c1108545186593deba36c4ac ]

On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.

This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.

Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 219440bebd052..72c0a2ae2dd4f 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -3566,7 +3566,8 @@ static int smu7_read_sensor(struct pp_hwmgr *hwmgr, int idx,
 	case AMDGPU_PP_SENSOR_GPU_POWER:
 		return smu7_get_gpu_power(hwmgr, (uint32_t *)value);
 	case AMDGPU_PP_SENSOR_VDDGFX:
-		if ((data->vr_config & 0xff) == 0x2)
+		if ((data->vr_config & VRCONF_VDDGFX_MASK) ==
+		    (VR_SVI2_PLANE_2 << VRCONF_VDDGFX_SHIFT))
 			val_vid = PHM_READ_INDIRECT_FIELD(hwmgr->device,
 					CGS_IND_REG__SMC, PWR_SVI2_STATUS, PLANE2_VID);
 		else
-- 
2.25.1

[PATCH AUTOSEL 4.19 25/26] iommu/amd: Do not use IOMMUv2 functionality when SME is active

[Sasha Levin]

From: Joerg Roedel <jroedel@suse.de>

[ Upstream commit 2822e582501b65707089b097e773e6fd70774841 ]

When memory encryption is active the device is likely not in a direct
mapped domain. Forbid using IOMMUv2 functionality for now until finer
grained checks for this have been implemented.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_v2.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c
index 58da65df03f5e..7a59a8ebac108 100644
--- a/drivers/iommu/amd_iommu_v2.c
+++ b/drivers/iommu/amd_iommu_v2.c
@@ -776,6 +776,13 @@ int amd_iommu_init_device(struct pci_dev *pdev, int pasids)
 
 	might_sleep();
 
+	/*
+	 * When memory encryption is active the device is likely not in a
+	 * direct-mapped domain. Forbid using IOMMUv2 functionality for now.
+	 */
+	if (mem_encrypt_active())
+		return -ENODEV;
+
 	if (!amd_iommu_v2_supported())
 		return -ENODEV;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 26/26] gcov: Disable gcov build with GCC 10

[Sasha Levin]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit cfc905f158eaa099d6258031614d11869e7ef71c ]

GCOV built with GCC 10 doesn't initialize n_function variable.  This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.

As a workaround, let's disable GCOV build for broken GCC 10 version.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/gcov/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 1e3823fa799b2..bfb6579a19d07 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -3,6 +3,7 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
+	depends on !CC_IS_GCC || GCC_VERSION < 100000
 	select CONSTRUCTORS if !UML
 	default n
 	---help---
-- 
2.25.1