* [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples
@ 2020-09-08 14:59 Krzysztof Kozlowski
2020-09-15 16:55 ` Rob Herring
2020-09-17 18:57 ` Mark Brown
0 siblings, 2 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-08 14:59 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, alsa-devel, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted some
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Documentation/devicetree/bindings/sound/max98090.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5640.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5665.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5668.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5677.txt | 2 +-
Documentation/devicetree/bindings/sound/rt5682.txt | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index 7e1bbd5c27fd..39d640294c62 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -55,5 +55,5 @@ audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index e40e4893eed8..ff1228713f7e 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -88,7 +88,7 @@ rt5640 {
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 1766e0543fc5..56788f50b6cf 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -72,7 +72,7 @@ rt5659 {
compatible = "realtek,rt5659";
reg = <0x1b>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
index 8df170506986..f6ca96b4ce98 100644
--- a/Documentation/devicetree/bindings/sound/rt5665.txt
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -62,7 +62,7 @@ rt5659 {
compatible = "realtek,rt5665";
reg = <0x1b>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt
index c88b96e7764b..a2b7e9a2f2f3 100644
--- a/Documentation/devicetree/bindings/sound/rt5668.txt
+++ b/Documentation/devicetree/bindings/sound/rt5668.txt
@@ -41,7 +41,7 @@ rt5668 {
compatible = "realtek,rt5668b";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
realtek,dmic1-data-pin = <1>;
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index 1b3c13d206ff..da2430099181 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -64,7 +64,7 @@ rt5677 {
compatible = "realtek,rt5677";
reg = <0x2c>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index ade1ece8b45f..707fa98d1310 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -58,7 +58,7 @@ rt5682 {
compatible = "realtek,rt5682i";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
realtek,dmic1-data-pin = <1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples
2020-09-08 14:59 [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples Krzysztof Kozlowski
@ 2020-09-15 16:55 ` Rob Herring
2020-09-17 18:57 ` Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Rob Herring @ 2020-09-15 16:55 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, alsa-devel, linux-kernel, devicetree, Liam Girdwood,
Mark Brown
On Tue, 08 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> Documentation/devicetree/bindings/sound/max98090.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5640.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5665.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5668.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5677.txt | 2 +-
> Documentation/devicetree/bindings/sound/rt5682.txt | 2 +-
> 7 files changed, 7 insertions(+), 7 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples
2020-09-08 14:59 [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples Krzysztof Kozlowski
2020-09-15 16:55 ` Rob Herring
@ 2020-09-17 18:57 ` Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2020-09-17 18:57 UTC (permalink / raw)
To: Rob Herring, Liam Girdwood, linux-kernel, devicetree, alsa-devel,
Krzysztof Kozlowski
On Tue, 8 Sep 2020 16:59:54 +0200, Krzysztof Kozlowski wrote:
> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
> These are simple defines so they could be used in DTS but they will not
> have the same meaning:
> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>
> Correct the interrupt flags, assuming the author of the code wanted some
> logical behavior behind the name "ACTIVE_xxx", this is:
> ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: Correct interrupt flags in examples
commit: abe42b09118914f01246f880dd9029150fdc727c
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-09-17 19:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-08 14:59 [PATCH] ASoC: dt-bindings: Correct interrupt flags in examples Krzysztof Kozlowski
2020-09-15 16:55 ` Rob Herring
2020-09-17 18:57 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).