[PATCH 4.9 00/70] 4.9.237-rc1 review

[PATCH 4.9 00/70] 4.9.237-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.237 release.
There are 70 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 23 Sep 2020 16:20:12 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.237-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.237-rc1

Adam Borowski <kilobyte@angband.pl>
    x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/dma: Fix dma_map_ops::get_required_mask

Quentin Perret <qperret@google.com>
    ehci-hcd: Move include to keep CRC stable

Tobias Diedrich <tobiasdiedrich@gmail.com>
    serial: 8250_pci: Add Realtek 816a and 816b

Hans de Goede <hdegoede@redhat.com>
    Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

Oliver Neukum <oneukum@suse.com>
    usblp: fix race between disconnect() and read()

Oliver Neukum <oneukum@suse.com>
    USB: UAS: fix disconnect by unplugging a hub

Penghao <penghao@uniontech.com>
    USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook

Yu Kuai <yukuai3@huawei.com>
    drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail

Thomas Bogendoerfer <tsbogend@alpha.franken.de>
    MIPS: SNI: Fix spurious interrupts

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    fbcon: Fix user font detection test at fbcon_resize().

Namhyung Kim <namhyung@kernel.org>
    perf test: Free formats for perf pmu parse test

Thomas Bogendoerfer <tsbogend@alpha.franken.de>
    MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT

Michael Kelley <mikelley@microsoft.com>
    Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload

Nathan Chancellor <natechancellor@gmail.com>
    clk: rockchip: Fix initialization of mux_pll_src_4plls_p

Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
    i2c: algo: pca: Reapply i2c bus settings after reset

Laurent Pinchart <laurent.pinchart@ideasonboard.com>
    rapidio: Replace 'select' DMAENGINES 'with depends on'

J. Bruce Fields <bfields@redhat.com>
    SUNRPC: stop printk reading past end of string

Vincent Whitchurch <vincent.whitchurch@axis.com>
    spi: spi-loopback-test: Fix out-of-bounds read

James Smart <james.smart@broadcom.com>
    scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery

Dinghao Liu <dinghao.liu@zju.edu.cn>
    scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort

Olga Kornievskaia <kolga@netapp.com>
    NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall

Miaohe Lin <linmiaohe@huawei.com>
    net: handle the return value of pskb_carve_frag_list() correctly

Peter Oberparleiter <oberpar@linux.ibm.com>
    gcov: add support for GCC 10.1

Yi Zhang <yi.zhang@redhat.com>
    RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars

Bart Van Assche <bart.vanassche@sandisk.com>
    IB/rxe: Remove a pointless indirection layer

Mathias Nyman <mathias.nyman@linux.intel.com>
    usb: Fix out of sync data toggle if a configured device is reconfigured

Aleksander Morgado <aleksander@aleksander.es>
    USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules

Patrick Riphagen <patrick.riphagen@xsens.com>
    USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

Zeng Tao <prime.zeng@hisilicon.com>
    usb: core: fix slab-out-of-bounds Read in read_descriptors

Vaibhav Agarwal <vaibhav.sr@gmail.com>
    staging: greybus: audio: fix uninitialized value issue

Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
    video: fbdev: fix OOB read in vga_8planes_imageblit()

Wanpeng Li <wanpengli@tencent.com>
    KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit

Linus Torvalds <torvalds@linux-foundation.org>
    vgacon: remove software scrollback support

Linus Torvalds <torvalds@linux-foundation.org>
    fbcon: remove now unusued 'softback_lines' cursor() argument

Linus Torvalds <torvalds@linux-foundation.org>
    fbcon: remove soft scrollback code

Ilya Dryomov <idryomov@gmail.com>
    rbd: require global CAP_SYS_ADMIN for mapping and unmapping

Hou Pu <houpu@bytedance.com>
    scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem

Varun Prakash <varun@chelsio.com>
    scsi: target: iscsi: Fix data digest calculation

Michał Mirosław <mirq-linux@rere.qmqm.pl>
    regulator: push allocation in set_consumer_device_supply() out of lock

Filipe Manana <fdmanana@suse.com>
    btrfs: fix wrong address when faulting in pages in the search ioctl

Rustam Kovhaev <rkovhaev@gmail.com>
    staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()

Johan Hovold <johan@kernel.org>
    USB: core: add helpers to retrieve endpoints

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:accel:mma8452: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:accel:mma7455: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio: accel: kxsd9: Fix alignment of local buffer.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:light:max44000 Fix timestamp alignment and prevent data leak.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:magnetometer:ak8975 Fix alignment and data leak issues.

Sandhya Bankar <bankarsandhya512@gmail.com>
    drivers: iio: magnetometer: Fix sparse endianness warnings cast to restricted __be16

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:adc:ti-adc081c Fix alignment and data leak issues

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:adc:ina2xx Fix timestamp alignment issue.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio:light:ltr501 Fix timestamp alignment issue.

Maxim Kochetkov <fido_max@inbox.ru>
    iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set

Angelo Compagnucci <angelo.compagnucci@gmail.com>
    iio: adc: mcp3422: fix locking on error path

Angelo Compagnucci <angelo.compagnucci@gmail.com>
    iio: adc: mcp3422: fix locking scope

Leon Romanovsky <leonro@nvidia.com>
    gcov: Disable gcov build with GCC 10

Rander Wang <rander.wang@intel.com>
    ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/hdlc_cisco: Add hard_header_len

Vineet Gupta <vgupta@synopsys.com>
    irqchip/eznps: Fix build error for !ARC700 builds

Darrick J. Wong <darrick.wong@oracle.com>
    xfs: initialize the shortform attr header padding entry

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/lapbether: Set network_header before transmitting

Mohan Kumar <mkumard@nvidia.com>
    ALSA: hda: Fix 2 channel swapping for Tegra

Dinghao Liu <dinghao.liu@zju.edu.cn>
    firestream: Fix memleak in fs_open

Dinghao Liu <dinghao.liu@zju.edu.cn>
    NFC: st95hf: Fix memleak in st95hf_in_send_cmd

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/lapbether: Added needed_tailroom

Luo Jiaxing <luojiaxing@huawei.com>
    scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA

Kamal Heib <kamalheib1@gmail.com>
    RDMA/rxe: Drop pointless checks in rxe_init_ports

Dinghao Liu <dinghao.liu@zju.edu.cn>
    RDMA/rxe: Fix memleak in rxe_mem_init_user

Dinh Nguyen <dinguyen@kernel.org>
    ARM: dts: socfpga: fix register entry for timer3 on Arria10


-------------

Diffstat:

 Makefile                                  |   4 +-
 arch/arc/plat-eznps/include/plat/ctop.h   |   1 -
 arch/arm/boot/dts/socfpga_arria10.dtsi    |   2 +-
 arch/mips/Kconfig                         |   1 +
 arch/mips/sni/a20r.c                      |   9 +-
 arch/powerpc/configs/pasemi_defconfig     |   1 -
 arch/powerpc/configs/ppc6xx_defconfig     |   1 -
 arch/powerpc/kernel/dma-iommu.c           |   3 +-
 arch/x86/configs/i386_defconfig           |   2 +-
 arch/x86/configs/x86_64_defconfig         |   2 +-
 arch/x86/kvm/vmx.c                        |   1 +
 drivers/atm/firestream.c                  |   1 +
 drivers/block/rbd.c                       |  12 ++
 drivers/clk/rockchip/clk-rk3228.c         |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_drv.c    |   7 +-
 drivers/hv/channel_mgmt.c                 |   7 +-
 drivers/i2c/algos/i2c-algo-pca.c          |  35 ++--
 drivers/iio/accel/bmc150-accel-core.c     |  15 +-
 drivers/iio/accel/kxsd9.c                 |  16 +-
 drivers/iio/accel/mma7455_core.c          |  16 +-
 drivers/iio/accel/mma8452.c               |  11 +-
 drivers/iio/adc/ina2xx-adc.c              |  11 +-
 drivers/iio/adc/mcp3422.c                 |  16 +-
 drivers/iio/adc/ti-adc081c.c              |  11 +-
 drivers/iio/adc/ti-ads1015.c              |  10 +
 drivers/iio/light/ltr501.c                |  15 +-
 drivers/iio/light/max44000.c              |  12 +-
 drivers/iio/magnetometer/ak8975.c         |  26 ++-
 drivers/infiniband/sw/rxe/rxe.c           |   5 +-
 drivers/infiniband/sw/rxe/rxe_loc.h       |  20 +-
 drivers/infiniband/sw/rxe/rxe_mcast.c     |   4 +-
 drivers/infiniband/sw/rxe/rxe_mr.c        |   1 +
 drivers/infiniband/sw/rxe/rxe_net.c       |  43 ++--
 drivers/infiniband/sw/rxe/rxe_req.c       |   4 +-
 drivers/infiniband/sw/rxe/rxe_resp.c      |   4 +-
 drivers/infiniband/sw/rxe/rxe_verbs.c     |  10 +-
 drivers/infiniband/sw/rxe/rxe_verbs.h     |  22 --
 drivers/input/serio/i8042-x86ia64io.h     |  16 ++
 drivers/net/wan/hdlc_cisco.c              |   1 +
 drivers/net/wan/lapbether.c               |   3 +
 drivers/nfc/st95hf/core.c                 |   2 +-
 drivers/rapidio/Kconfig                   |   2 +-
 drivers/regulator/core.c                  |  46 ++--
 drivers/scsi/libsas/sas_ata.c             |   5 +-
 drivers/scsi/lpfc/lpfc_els.c              |   4 +-
 drivers/scsi/pm8001/pm8001_sas.c          |   2 +-
 drivers/spi/spi-loopback-test.c           |   2 +-
 drivers/staging/greybus/audio_topology.c  |  29 +--
 drivers/staging/wlan-ng/hfa384x_usb.c     |   5 -
 drivers/staging/wlan-ng/prism2usb.c       |  19 +-
 drivers/target/iscsi/iscsi_target.c       |  17 +-
 drivers/target/iscsi/iscsi_target_login.c |   6 +-
 drivers/target/iscsi/iscsi_target_login.h |   3 +-
 drivers/target/iscsi/iscsi_target_nego.c  |   3 +-
 drivers/tty/serial/8250/8250_pci.c        |  11 +
 drivers/usb/class/usblp.c                 |   5 +
 drivers/usb/core/message.c                |  91 ++++----
 drivers/usb/core/quirks.c                 |   4 +
 drivers/usb/core/sysfs.c                  |   5 +
 drivers/usb/core/usb.c                    |  83 ++++++++
 drivers/usb/host/ehci-hcd.c               |   1 +
 drivers/usb/host/ehci-hub.c               |   1 -
 drivers/usb/serial/ftdi_sio.c             |   1 +
 drivers/usb/serial/ftdi_sio_ids.h         |   1 +
 drivers/usb/serial/option.c               |   2 +
 drivers/usb/storage/uas.c                 |  14 +-
 drivers/video/console/Kconfig             |  25 ---
 drivers/video/console/bitblit.c           |  11 +-
 drivers/video/console/fbcon.c             | 336 +-----------------------------
 drivers/video/console/fbcon.h             |   2 +-
 drivers/video/console/fbcon_ccw.c         |  11 +-
 drivers/video/console/fbcon_cw.c          |  11 +-
 drivers/video/console/fbcon_ud.c          |  11 +-
 drivers/video/console/tileblit.c          |   2 +-
 drivers/video/console/vgacon.c            | 159 +-------------
 drivers/video/fbdev/vga16fb.c             |   2 +-
 fs/btrfs/ioctl.c                          |   3 +-
 fs/nfs/nfs4proc.c                         |   7 +-
 fs/xfs/libxfs/xfs_attr_leaf.c             |   4 +-
 include/linux/i2c-algo-pca.h              |  15 ++
 include/linux/usb.h                       |  35 ++++
 include/soc/nps/common.h                  |   6 +
 kernel/gcov/gcc_4_7.c                     |   4 +-
 net/core/skbuff.c                         |  10 +-
 net/sunrpc/rpcb_clnt.c                    |   4 +-
 sound/hda/hdac_device.c                   |   2 +
 sound/pci/hda/patch_hdmi.c                |   5 +
 tools/perf/tests/pmu.c                    |   1 +
 tools/perf/util/pmu.c                     |  11 +
 tools/perf/util/pmu.h                     |   1 +
 90 files changed, 595 insertions(+), 830 deletions(-)

[PATCH 4.9 01/70] ARM: dts: socfpga: fix register entry for timer3 on Arria10

[Greg Kroah-Hartman]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit 0ff5a4812be4ebd4782bbb555d369636eea164f7 ]

Fixes the register address for the timer3 entry on Arria10.

Fixes: 475dc86d08de4 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4d496479e1353..342ae7ef9f08c 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -710,7 +710,7 @@
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
 		};
-- 
2.25.1

[PATCH 4.9 02/70] RDMA/rxe: Fix memleak in rxe_mem_init_user

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit e3ddd6067ee62f6e76ebcf61ff08b2c729ae412b ]

When page_address() fails, umem should be freed just like when
rxe_mem_alloc() fails.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200819075632.22285-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_mr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c
index 9b732c5f89e16..6d1ba75398a1a 100644
--- a/drivers/infiniband/sw/rxe/rxe_mr.c
+++ b/drivers/infiniband/sw/rxe/rxe_mr.c
@@ -205,6 +205,7 @@ int rxe_mem_init_user(struct rxe_dev *rxe, struct rxe_pd *pd, u64 start,
 			vaddr = page_address(sg_page(sg));
 			if (!vaddr) {
 				pr_warn("null vaddr\n");
+				ib_umem_release(umem);
 				err = -ENOMEM;
 				goto err1;
 			}
-- 
2.25.1

[PATCH 4.9 03/70] RDMA/rxe: Drop pointless checks in rxe_init_ports

[Greg Kroah-Hartman]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit 6112ef62826e91afbae5446d5d47b38e25f47e3f ]

Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no
need to check if they aren't set.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index ab6c3c25d7ff9..c11d33a30183c 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -168,9 +168,6 @@ static int rxe_init_ports(struct rxe_dev *rxe)
 
 	rxe_init_port_param(port);
 
-	if (!port->attr.pkey_tbl_len || !port->attr.gid_tbl_len)
-		return -EINVAL;
-
 	port->pkey_tbl = kcalloc(port->attr.pkey_tbl_len,
 			sizeof(*port->pkey_tbl), GFP_KERNEL);
 
-- 
2.25.1

[PATCH 4.9 04/70] scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA

[Greg Kroah-Hartman]

From: Luo Jiaxing <luojiaxing@huawei.com>

[ Upstream commit 53de092f47ff40e8d4d78d590d95819d391bf2e0 ]

It was discovered that sdparm will fail when attempting to disable write
cache on a SATA disk connected via libsas.

In the ATA command set the write cache state is controlled through the SET
FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and
the latter command is what is used in the SCSI-ATA translation layer. A
subtle difference is that a MODE SELECT carries data whereas SET FEATURES
is defined as a non-data command in ATA.

Set the DMA data direction to DMA_NONE if the requested ATA command is
identified as non-data.

[mkp: commit desc]

Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas")
Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_ata.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 87f5e694dbedd..b820c3a022eac 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -227,7 +227,10 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
 		task->num_scatter = si;
 	}
 
-	task->data_dir = qc->dma_dir;
+	if (qc->tf.protocol == ATA_PROT_NODATA)
+		task->data_dir = DMA_NONE;
+	else
+		task->data_dir = qc->dma_dir;
 	task->scatter = qc->sg;
 	task->ata_task.retry_count = 1;
 	task->task_state_flags = SAS_TASK_STATE_PENDING;
-- 
2.25.1

[PATCH 4.9 05/70] drivers/net/wan/lapbether: Added needed_tailroom

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ]

The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 6eb0f7a85e531..5befc7f3f0e7a 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -343,6 +343,7 @@ static int lapbeth_new_device(struct net_device *dev)
 	 */
 	ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len
 					   + dev->needed_headroom;
+	ndev->needed_tailroom = dev->needed_tailroom;
 
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
-- 
2.25.1

[PATCH 4.9 06/70] NFC: st95hf: Fix memleak in st95hf_in_send_cmd

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit f97c04c316d8fea16dca449fdfbe101fbdfee6a2 ]

When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/st95hf/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c
index 850e75571c8ee..bb1e878913f3a 100644
--- a/drivers/nfc/st95hf/core.c
+++ b/drivers/nfc/st95hf/core.c
@@ -981,7 +981,7 @@ static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev,
 	rc = down_killable(&stcontext->exchange_lock);
 	if (rc) {
 		WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n");
-		return rc;
+		goto free_skb_resp;
 	}
 
 	rc = st95hf_spi_send(&stcontext->spicontext, skb->data,
-- 
2.25.1

[PATCH 4.9 07/70] firestream: Fix memleak in fs_open

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 15ac5cdafb9202424206dc5bd376437a358963f9 ]

When make_rate() fails, vcc should be freed just
like other error paths in fs_open().

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/firestream.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 82296fe2ba3bd..7cb2b863e653e 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1013,6 +1013,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 				error = make_rate (pcr, r, &tmc0, NULL);
 				if (error) {
 					kfree(tc);
+					kfree(vcc);
 					return error;
 				}
 			}
-- 
2.25.1

[PATCH 4.9 08/70] ALSA: hda: Fix 2 channel swapping for Tegra

[Greg Kroah-Hartman]

From: Mohan Kumar <mkumard@nvidia.com>

[ Upstream commit 216116eae43963c662eb84729507bad95214ca6b ]

The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 2def4ad579ccf..4f8dd558af48f 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -3224,6 +3224,7 @@ static int tegra_hdmi_build_pcms(struct hda_codec *codec)
 
 static int patch_tegra_hdmi(struct hda_codec *codec)
 {
+	struct hdmi_spec *spec;
 	int err;
 
 	err = patch_generic_hdmi(codec);
@@ -3231,6 +3232,10 @@ static int patch_tegra_hdmi(struct hda_codec *codec)
 		return err;
 
 	codec->patch_ops.build_pcms = tegra_hdmi_build_pcms;
+	spec = codec->spec;
+	spec->chmap.ops.chmap_cea_alloc_validate_get_type =
+		nvhdmi_chmap_cea_alloc_validate_get_type;
+	spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate;
 
 	return 0;
 }
-- 
2.25.1

[PATCH 4.9 09/70] drivers/net/wan/lapbether: Set network_header before transmitting

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ]

Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.

This patch fixes the following issue:

When we use this driver with AF_PACKET sockets, there would be error
messages of:
   protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.

This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.

Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):

Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 5befc7f3f0e7a..c6db9a4e7c457 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -213,6 +213,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
 
 	skb->dev = dev = lapbeth->ethdev;
 
+	skb_reset_network_header(skb);
+
 	dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
 
 	dev_queue_xmit(skb);
-- 
2.25.1

[PATCH 4.9 10/70] xfs: initialize the shortform attr header padding entry

[Greg Kroah-Hartman]

From: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit 125eac243806e021f33a1fdea3687eccbb9f7636 ]

Don't leak kernel memory contents into the shortform attr fork.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_attr_leaf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c
index 70da4113c2baf..7b9dd76403bfd 100644
--- a/fs/xfs/libxfs/xfs_attr_leaf.c
+++ b/fs/xfs/libxfs/xfs_attr_leaf.c
@@ -520,8 +520,8 @@ xfs_attr_shortform_create(xfs_da_args_t *args)
 		ASSERT(ifp->if_flags & XFS_IFINLINE);
 	}
 	xfs_idata_realloc(dp, sizeof(*hdr), XFS_ATTR_FORK);
-	hdr = (xfs_attr_sf_hdr_t *)ifp->if_u1.if_data;
-	hdr->count = 0;
+	hdr = (struct xfs_attr_sf_hdr *)ifp->if_u1.if_data;
+	memset(hdr, 0, sizeof(*hdr));
 	hdr->totsize = cpu_to_be16(sizeof(*hdr));
 	xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA);
 }
-- 
2.25.1

[PATCH 4.9 11/70] irqchip/eznps: Fix build error for !ARC700 builds

[Greg Kroah-Hartman]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]

eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.

The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
 - copy AUX_IENABLE from arch/arc header
 - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-eznps/include/plat/ctop.h | 1 -
 include/soc/nps/common.h                | 6 ++++++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
index 3c401ce0351ef..fb959828630ce 100644
--- a/arch/arc/plat-eznps/include/plat/ctop.h
+++ b/arch/arc/plat-eznps/include/plat/ctop.h
@@ -42,7 +42,6 @@
 #define CTOP_AUX_HW_COMPLY			(CTOP_AUX_BASE + 0x024)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 
diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h
index 9b1d43d671a3f..8c18dc6d3fde5 100644
--- a/include/soc/nps/common.h
+++ b/include/soc/nps/common.h
@@ -45,6 +45,12 @@
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST	0x5B60
 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM	0x00010422
 
+#ifndef AUX_IENABLE
+#define AUX_IENABLE				0x40c
+#endif
+
+#define CTOP_AUX_IACK				(0xFFFFF800 + 0x088)
+
 #ifndef __ASSEMBLY__
 
 /* In order to increase compilation test coverage */
-- 
2.25.1

[PATCH 4.9 12/70] drivers/net/wan/hdlc_cisco: Add hard_header_len

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ]

This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.

This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc_cisco.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a408abc25512a..7f99fb666f196 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -377,6 +377,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr)
 		memcpy(&state(hdlc)->settings, &new_settings, size);
 		spin_lock_init(&state(hdlc)->lock);
 		dev->header_ops = &cisco_header_ops;
+		dev->hard_header_len = sizeof(struct hdlc_header);
 		dev->type = ARPHRD_CISCO;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_on(dev);
-- 
2.25.1

[PATCH 4.9 13/70] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled

[Greg Kroah-Hartman]

From: Rander Wang <rander.wang@intel.com>

[ Upstream commit 13774d81f38538c5fa2924bdcdfa509155480fa6 ]

In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.

This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_device.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 03c9872c31cfe..73264d5f58f81 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -123,6 +123,8 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init);
 void snd_hdac_device_exit(struct hdac_device *codec)
 {
 	pm_runtime_put_noidle(&codec->dev);
+	/* keep balance of runtime PM child_count in parent device */
+	pm_runtime_set_suspended(&codec->dev);
 	snd_hdac_bus_remove_device(codec->bus, codec);
 	kfree(codec->vendor_name);
 	kfree(codec->chip_name);
-- 
2.25.1

[PATCH 4.9 14/70] gcov: Disable gcov build with GCC 10

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit cfc905f158eaa099d6258031614d11869e7ef71c ]

GCOV built with GCC 10 doesn't initialize n_function variable.  This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.

As a workaround, let's disable GCOV build for broken GCC 10 version.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/gcov/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 1276aabaab550..1d78ed19a3512 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -3,6 +3,7 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
+	depends on !CC_IS_GCC || GCC_VERSION < 100000
 	select CONSTRUCTORS if !UML
 	default n
 	---help---
-- 
2.25.1

[PATCH 4.9 15/70] iio: adc: mcp3422: fix locking scope

[Greg Kroah-Hartman]

From: Angelo Compagnucci <angelo.compagnucci@gmail.com>

commit 3f1093d83d7164e4705e4232ccf76da54adfda85 upstream.

Locking should be held for the entire reading sequence involving setting
the channel, waiting for the channel switch and reading from the
channel.
If not, reading from a channel can result mixing with the reading from
another channel.

Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC")
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200819075525.1395248-1-angelo.compagnucci@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/mcp3422.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -99,16 +99,12 @@ static int mcp3422_update_config(struct
 {
 	int ret;
 
-	mutex_lock(&adc->lock);
-
 	ret = i2c_master_send(adc->i2c, &newconfig, 1);
 	if (ret > 0) {
 		adc->config = newconfig;
 		ret = 0;
 	}
 
-	mutex_unlock(&adc->lock);
-
 	return ret;
 }
 
@@ -141,6 +137,8 @@ static int mcp3422_read_channel(struct m
 	u8 config;
 	u8 req_channel = channel->channel;
 
+	mutex_lock(&adc->lock);
+
 	if (req_channel != MCP3422_CHANNEL(adc->config)) {
 		config = adc->config;
 		config &= ~MCP3422_CHANNEL_MASK;
@@ -153,7 +151,11 @@ static int mcp3422_read_channel(struct m
 		msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]);
 	}
 
-	return mcp3422_read(adc, value, &config);
+	ret = mcp3422_read(adc, value, &config);
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
 }
 
 static int mcp3422_read_raw(struct iio_dev *iio,

[PATCH 4.9 16/70] iio: adc: mcp3422: fix locking on error path

[Greg Kroah-Hartman]

From: Angelo Compagnucci <angelo.compagnucci@gmail.com>

[ Upstream commit a139ffa40f0c24b753838b8ef3dcf6ad10eb7854 ]

Reading from the chip should be unlocked on error path else the lock
could never being released.

Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC")
Fixes: 3f1093d83d71 ("iio: adc: mcp3422: fix locking scope")
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/mcp3422.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -146,8 +146,10 @@ static int mcp3422_read_channel(struct m
 		config &= ~MCP3422_PGA_MASK;
 		config |= MCP3422_PGA_VALUE(adc->pga[req_channel]);
 		ret = mcp3422_update_config(adc, config);
-		if (ret < 0)
+		if (ret < 0) {
+			mutex_unlock(&adc->lock);
 			return ret;
+		}
 		msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]);
 	}
 

[PATCH 4.9 17/70] iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set

[Greg Kroah-Hartman]

From: Maxim Kochetkov <fido_max@inbox.ru>

commit e71e6dbe96ac80ac2aebe71a6a942e7bd60e7596 upstream.

To stop conversion ads1015_set_power_state() function call unimplemented
function __pm_runtime_suspend() from pm_runtime_put_autosuspend()
if CONFIG_PM is not set.
In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS,
so ads1015_read_raw() failed because ads1015_set_power_state() returns an
error.

If CONFIG_PM is disabled, there is no need to start/stop conversion.
Fix it by adding return 0 function variant if CONFIG_PM is not set.

Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support")
Tested-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ti-ads1015.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -220,6 +220,7 @@ static const struct iio_chan_spec ads111
 	IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
 };
 
+#ifdef CONFIG_PM
 static int ads1015_set_power_state(struct ads1015_data *data, bool on)
 {
 	int ret;
@@ -237,6 +238,15 @@ static int ads1015_set_power_state(struc
 	return ret < 0 ? ret : 0;
 }
 
+#else /* !CONFIG_PM */
+
+static int ads1015_set_power_state(struct ads1015_data *data, bool on)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PM */
+
 static
 int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
 {

[PATCH 4.9 18/70] iio:light:ltr501 Fix timestamp alignment issue.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 2684d5003490df5398aeafe2592ba9d4a4653998 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here we use a structure on the stack.  The driver already did an
explicit memset so no data leak was possible.

Forced alignment of ts is not strictly necessary but probably makes
the code slightly less fragile.

Note there has been some rework in this driver of the years, so no
way this will apply cleanly all the way back.

Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/ltr501.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1218,13 +1218,16 @@ static irqreturn_t ltr501_trigger_handle
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ltr501_data *data = iio_priv(indio_dev);
-	u16 buf[8];
+	struct {
+		u16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 	__le16 als_buf[2];
 	u8 mask = 0;
 	int j = 0;
 	int ret, psdata;
 
-	memset(buf, 0, sizeof(buf));
+	memset(&scan, 0, sizeof(scan));
 
 	/* figure out which data needs to be ready */
 	if (test_bit(0, indio_dev->active_scan_mask) ||
@@ -1243,9 +1246,9 @@ static irqreturn_t ltr501_trigger_handle
 		if (ret < 0)
 			return ret;
 		if (test_bit(0, indio_dev->active_scan_mask))
-			buf[j++] = le16_to_cpu(als_buf[1]);
+			scan.channels[j++] = le16_to_cpu(als_buf[1]);
 		if (test_bit(1, indio_dev->active_scan_mask))
-			buf[j++] = le16_to_cpu(als_buf[0]);
+			scan.channels[j++] = le16_to_cpu(als_buf[0]);
 	}
 
 	if (mask & LTR501_STATUS_PS_RDY) {
@@ -1253,10 +1256,10 @@ static irqreturn_t ltr501_trigger_handle
 				       &psdata, 2);
 		if (ret < 0)
 			goto done;
-		buf[j++] = psdata & LTR501_PS_DATA_MASK;
+		scan.channels[j++] = psdata & LTR501_PS_DATA_MASK;
 	}
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
 					   iio_get_time_ns(indio_dev));
 
 done:

[PATCH 4.9 19/70] iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit a6f86f724394de3629da63fe5e1b7a4ab3396efe upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by moving
to a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure.  This data is allocated
with kzalloc so no data can leak appart from previous readings.

Fixes tag is beyond some major refactoring so likely manual backporting
would be needed to get that far back.

Whilst the force alignment of the ts is not strictly necessary, it
does make the code less fragile.

Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/bmc150-accel-core.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -197,6 +197,14 @@ struct bmc150_accel_data {
 	struct mutex mutex;
 	u8 fifo_mode, watermark;
 	s16 buffer[8];
+	/*
+	 * Ensure there is sufficient space and correct alignment for
+	 * the timestamp if enabled
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 	u8 bw_bits;
 	u32 slope_dur;
 	u32 slope_thres;
@@ -933,15 +941,16 @@ static int __bmc150_accel_fifo_flush(str
 	 * now.
 	 */
 	for (i = 0; i < count; i++) {
-		u16 sample[8];
 		int j, bit;
 
 		j = 0;
 		for_each_set_bit(bit, indio_dev->active_scan_mask,
 				 indio_dev->masklength)
-			memcpy(&sample[j++], &buffer[i * 3 + bit], 2);
+			memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit],
+			       sizeof(data->scan.channels[0]));
 
-		iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp);
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+						   tstamp);
 
 		tstamp += sample_period;
 	}

[PATCH 4.9 20/70] iio:adc:ina2xx Fix timestamp alignment issue.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit f8cd222feb82ecd82dcf610fcc15186f55f9c2b5 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc so no
data can leak apart from previous readings. The explicit alignment
isn't technically needed here, but it reduced fragility and avoids
cut and paste into drivers where it will be needed.

If we want this in older stables will need manual backport due to
driver reworks.

Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ina2xx-adc.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -117,6 +117,11 @@ struct ina2xx_chip_info {
 	int int_time_vbus; /* Bus voltage integration time uS */
 	int int_time_vshunt; /* Shunt voltage integration time uS */
 	bool allow_async_readout;
+	/* data buffer needs space for channel data and timestamp */
+	struct {
+		u16 chan[4];
+		u64 ts __aligned(8);
+	} scan;
 };
 
 static const struct ina2xx_config ina2xx_config[] = {
@@ -459,7 +464,6 @@ static const struct iio_chan_spec ina2xx
 static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 {
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
-	unsigned short data[8];
 	int bit, ret, i = 0;
 	s64 time_a, time_b;
 	unsigned int alert;
@@ -500,13 +504,12 @@ static int ina2xx_work_buffer(struct iio
 		if (ret < 0)
 			return ret;
 
-		data[i++] = val;
+		chip->scan.chan[i++] = val;
 	}
 
 	time_b = iio_get_time_ns(indio_dev);
 
-	iio_push_to_buffers_with_timestamp(indio_dev,
-					   (unsigned int *)data, time_a);
+	iio_push_to_buffers_with_timestamp(indio_dev, &chip->scan, time_a);
 
 	return (unsigned long)(time_b - time_a) / 1000;
 };

[PATCH 4.9 21/70] iio:adc:ti-adc081c Fix alignment and data leak issues

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 54f82df2ba86e2a8e9cbf4036d192366e3905c89 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv().

This data is allocated with kzalloc so no data can leak apart
from previous readings.

The eplicit alignment of ts is necessary to ensure correct padding
on x86_32 where s64 is only aligned to 4 bytes.

Fixes: 08e05d1fce5c ("ti-adc081c: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/adc/ti-adc081c.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -36,6 +36,12 @@ struct adc081c {
 
 	/* 8, 10 or 12 */
 	int bits;
+
+	/* Ensure natural alignment of buffer elements */
+	struct {
+		u16 channel;
+		s64 ts __aligned(8);
+	} scan;
 };
 
 #define REG_CONV_RES 0x00
@@ -132,14 +138,13 @@ static irqreturn_t adc081c_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adc081c *data = iio_priv(indio_dev);
-	u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */
 	int ret;
 
 	ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES);
 	if (ret < 0)
 		goto out;
-	buf[0] = ret;
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	data->scan.channel = ret;
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 out:
 	iio_trigger_notify_done(indio_dev->trig);

[PATCH 4.9 22/70] drivers: iio: magnetometer: Fix sparse endianness warnings cast to restricted __be16

[Greg Kroah-Hartman]

From: Sandhya Bankar <bankarsandhya512@gmail.com>

commit 69c72ec9c80bbd206c6fac73874d73e69cc623b4 upstream.

Fix the following sparse endianness warnings:

drivers/iio/magnetometer/ak8975.c:716:16: warning: cast to restricted __le16
drivers/iio/magnetometer/ak8975.c:837:19: warning: cast to restricted __le16
drivers/iio/magnetometer/ak8975.c:838:19: warning: cast to restricted __le16
drivers/iio/magnetometer/ak8975.c:839:19: warning: cast to restricted __le16

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/magnetometer/ak8975.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -690,6 +690,7 @@ static int ak8975_read_axis(struct iio_d
 	struct ak8975_data *data = iio_priv(indio_dev);
 	const struct i2c_client *client = data->client;
 	const struct ak_def *def = data->def;
+	__le16 rval;
 	u16 buff;
 	int ret;
 
@@ -703,7 +704,7 @@ static int ak8975_read_axis(struct iio_d
 
 	ret = i2c_smbus_read_i2c_block_data_or_emulated(
 			client, def->data_regs[index],
-			sizeof(buff), (u8*)&buff);
+			sizeof(rval), (u8*)&rval);
 	if (ret < 0)
 		goto exit;
 
@@ -713,7 +714,7 @@ static int ak8975_read_axis(struct iio_d
 	pm_runtime_put_autosuspend(&data->client->dev);
 
 	/* Swap bytes and convert to valid range. */
-	buff = le16_to_cpu(buff);
+	buff = le16_to_cpu(rval);
 	*val = clamp_t(s16, buff, -def->range, def->range);
 	return IIO_VAL_INT;
 
@@ -813,6 +814,7 @@ static void ak8975_fill_buffer(struct ii
 	const struct ak_def *def = data->def;
 	int ret;
 	s16 buff[8]; /* 3 x 16 bits axis values + 1 aligned 64 bits timestamp */
+	__le16 fval[3];
 
 	mutex_lock(&data->lock);
 
@@ -826,17 +828,17 @@ static void ak8975_fill_buffer(struct ii
 	 */
 	ret = i2c_smbus_read_i2c_block_data_or_emulated(client,
 							def->data_regs[0],
-							3 * sizeof(buff[0]),
-							(u8 *)buff);
+							3 * sizeof(fval[0]),
+							(u8 *)fval);
 	if (ret < 0)
 		goto unlock;
 
 	mutex_unlock(&data->lock);
 
 	/* Clamp to valid range. */
-	buff[0] = clamp_t(s16, le16_to_cpu(buff[0]), -def->range, def->range);
-	buff[1] = clamp_t(s16, le16_to_cpu(buff[1]), -def->range, def->range);
-	buff[2] = clamp_t(s16, le16_to_cpu(buff[2]), -def->range, def->range);
+	buff[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range);
+	buff[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range);
+	buff[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range);
 
 	iio_push_to_buffers_with_timestamp(indio_dev, buff,
 					   iio_get_time_ns(indio_dev));

[PATCH 4.9 23/70] iio:magnetometer:ak8975 Fix alignment and data leak issues.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 02ad21cefbac4d89ac443866f25b90449527737b upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data.

This data is allocated with kzalloc so no data can leak apart from
previous readings.

The explicit alignment of ts is not necessary in this case as by
coincidence the padding will end up the same, however I consider
it to make the code less fragile and have included it.

Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/magnetometer/ak8975.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -381,6 +381,12 @@ struct ak8975_data {
 	struct iio_mount_matrix orientation;
 	struct regulator	*vdd;
 	struct regulator	*vid;
+
+	/* Ensure natural alignment of timestamp */
+	struct {
+		s16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 /* Enable attached power regulator if any. */
@@ -813,7 +819,6 @@ static void ak8975_fill_buffer(struct ii
 	const struct i2c_client *client = data->client;
 	const struct ak_def *def = data->def;
 	int ret;
-	s16 buff[8]; /* 3 x 16 bits axis values + 1 aligned 64 bits timestamp */
 	__le16 fval[3];
 
 	mutex_lock(&data->lock);
@@ -836,12 +841,13 @@ static void ak8975_fill_buffer(struct ii
 	mutex_unlock(&data->lock);
 
 	/* Clamp to valid range. */
-	buff[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range);
-	buff[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range);
-	buff[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range);
+	data->scan.channels[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range);
+	data->scan.channels[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range);
+	data->scan.channels[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buff,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
+
 	return;
 
 unlock:

[PATCH 4.9 24/70] iio:light:max44000 Fix timestamp alignment and prevent data leak.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 523628852a5f5f34a15252b2634d0498d3cfb347 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak appart
from previous readings.

It is necessary to force the alignment of ts to avoid the padding
on x86_32 being different from 64 bit platorms (it alows for
4 bytes aligned 8 byte types.

Fixes: 06ad7ea10e2b ("max44000: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/light/max44000.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/iio/light/max44000.c
+++ b/drivers/iio/light/max44000.c
@@ -78,6 +78,11 @@
 struct max44000_data {
 	struct mutex lock;
 	struct regmap *regmap;
+	/* Ensure naturally aligned timestamp */
+	struct {
+		u16 channels[2];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 /* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */
@@ -491,7 +496,6 @@ static irqreturn_t max44000_trigger_hand
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct max44000_data *data = iio_priv(indio_dev);
-	u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */
 	int index = 0;
 	unsigned int regval;
 	int ret;
@@ -501,17 +505,17 @@ static irqreturn_t max44000_trigger_hand
 		ret = max44000_read_alsval(data);
 		if (ret < 0)
 			goto out_unlock;
-		buf[index++] = ret;
+		data->scan.channels[index++] = ret;
 	}
 	if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) {
 		ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, &regval);
 		if (ret < 0)
 			goto out_unlock;
-		buf[index] = regval;
+		data->scan.channels[index] = regval;
 	}
 	mutex_unlock(&data->lock);
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
 					   iio_get_time_ns(indio_dev));
 	iio_trigger_notify_done(indio_dev->trig);
 	return IRQ_HANDLED;

[PATCH 4.9 25/70] iio: accel: kxsd9: Fix alignment of local buffer.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 95ad67577de4ea08eb8e441394e698aa4addcc0b upstream.

iio_push_to_buffers_with_timestamp assumes 8 byte alignment which
is not guaranteed by an array of smaller elements.

Note that whilst in this particular case the alignment forcing
of the ts element is not strictly necessary it acts as good
documentation.  Doing this where not necessary should cut
down on the number of cut and paste introduced errors elsewhere.

Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/kxsd9.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -212,14 +212,20 @@ static irqreturn_t kxsd9_trigger_handler
 	const struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct kxsd9_state *st = iio_priv(indio_dev);
+	/*
+	 * Ensure correct positioning and alignment of timestamp.
+	 * No need to zero initialize as all elements written.
+	 */
+	struct {
+		__be16 chan[4];
+		s64 ts __aligned(8);
+	} hw_values;
 	int ret;
-	/* 4 * 16bit values AND timestamp */
-	__be16 hw_values[8];
 
 	ret = regmap_bulk_read(st->map,
 			       KXSD9_REG_X,
-			       &hw_values,
-			       8);
+			       hw_values.chan,
+			       sizeof(hw_values.chan));
 	if (ret) {
 		dev_err(st->dev,
 			"error reading data\n");
@@ -227,7 +233,7 @@ static irqreturn_t kxsd9_trigger_handler
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev,
-					   hw_values,
+					   &hw_values,
 					   iio_get_time_ns(indio_dev));
 	iio_trigger_notify_done(indio_dev->trig);
 

[PATCH 4.9 26/70] iio:accel:mma7455: Fix timestamp alignment and prevent data leak.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 7e5ac1f2206eda414f90c698fe1820dee873394d upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack   As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here.  We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure.  This data is allocated
with kzalloc so no data can leak appart from previous readings.

The force alignment of ts is not strictly necessary in this particularly
case but does make the code less fragile.

Fixes: a84ef0d181d9 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/mma7455_core.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/iio/accel/mma7455_core.c
+++ b/drivers/iio/accel/mma7455_core.c
@@ -55,6 +55,14 @@
 
 struct mma7455_data {
 	struct regmap *regmap;
+	/*
+	 * Used to reorganize data.  Will ensure correct alignment of
+	 * the timestamp if present
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static int mma7455_drdy(struct mma7455_data *mma7455)
@@ -85,19 +93,19 @@ static irqreturn_t mma7455_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mma7455_data *mma7455 = iio_priv(indio_dev);
-	u8 buf[16]; /* 3 x 16-bit channels + padding + ts */
 	int ret;
 
 	ret = mma7455_drdy(mma7455);
 	if (ret)
 		goto done;
 
-	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf,
-			       sizeof(__le16) * 3);
+	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL,
+			       mma7455->scan.channels,
+			       sizeof(mma7455->scan.channels));
 	if (ret)
 		goto done;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &mma7455->scan,
 					   iio_get_time_ns(indio_dev));
 
 done:

[PATCH 4.9 27/70] iio:accel:mma8452: Fix timestamp alignment and prevent data leak.

[Greg Kroah-Hartman]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

commit 89226a296d816727405d3fea684ef69e7d388bd8 upstream.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack.  As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here.  We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure.  This data is allocated
with kzalloc so no data can leak appart from previous readings.

The additional forcing of the 8 byte alignment of the timestamp
is not strictly necessary but makes the code less fragile by
making this explicit.

Fixes: c7eeea93ac60 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/mma8452.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -105,6 +105,12 @@ struct mma8452_data {
 	u8 ctrl_reg1;
 	u8 data_cfg;
 	const struct mma_chip_info *chip_info;
+
+	/* Ensure correct alignment of time stamp when present */
+	struct {
+		__be16 channels[3];
+		s64 ts __aligned(8);
+	} buffer;
 };
 
 /**
@@ -985,14 +991,13 @@ static irqreturn_t mma8452_trigger_handl
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mma8452_data *data = iio_priv(indio_dev);
-	u8 buffer[16]; /* 3 16-bit channels + padding + ts */
 	int ret;
 
-	ret = mma8452_read(data, (__be16 *)buffer);
+	ret = mma8452_read(data, data->buffer.channels);
 	if (ret < 0)
 		goto done;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
 					   iio_get_time_ns(indio_dev));
 
 done:

[PATCH 4.9 28/70] USB: core: add helpers to retrieve endpoints

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 66a359390e7e34f9a4c489467234b107b3d76169 upstream.

Many USB drivers iterate over the available endpoints to find required
endpoints of a specific type and direction. Typically the endpoints are
required for proper function and a missing endpoint should abort probe.

To facilitate code reuse, add a helper to retrieve common endpoints
(bulk or interrupt, in or out) and four wrappers to find a single
endpoint.

Note that the helpers are marked as __must_check to serve as a reminder
to always verify that all expected endpoints are indeed present. This
also means that any optional endpoints, typically need to be looked up
through separate calls.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/usb.c |   83 +++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/usb.h    |   35 ++++++++++++++++++++
 2 files changed, 118 insertions(+)

--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -73,6 +73,89 @@ MODULE_PARM_DESC(autosuspend, "default a
 
 
 /**
+ * usb_find_common_endpoints() -- look up common endpoint descriptors
+ * @alt:	alternate setting to search
+ * @bulk_in:	pointer to descriptor pointer, or NULL
+ * @bulk_out:	pointer to descriptor pointer, or NULL
+ * @int_in:	pointer to descriptor pointer, or NULL
+ * @int_out:	pointer to descriptor pointer, or NULL
+ *
+ * Search the alternate setting's endpoint descriptors for the first bulk-in,
+ * bulk-out, interrupt-in and interrupt-out endpoints and return them in the
+ * provided pointers (unless they are NULL).
+ *
+ * If a requested endpoint is not found, the corresponding pointer is set to
+ * NULL.
+ *
+ * Return: Zero if all requested descriptors were found, or -ENXIO otherwise.
+ */
+int usb_find_common_endpoints(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out)
+{
+	struct usb_endpoint_descriptor *epd;
+	int i;
+
+	if (bulk_in)
+		*bulk_in = NULL;
+	if (bulk_out)
+		*bulk_out = NULL;
+	if (int_in)
+		*int_in = NULL;
+	if (int_out)
+		*int_out = NULL;
+
+	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
+		epd = &alt->endpoint[i].desc;
+
+		switch (usb_endpoint_type(epd)) {
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_endpoint_dir_in(epd)) {
+				if (bulk_in && !*bulk_in) {
+					*bulk_in = epd;
+					break;
+				}
+			} else {
+				if (bulk_out && !*bulk_out) {
+					*bulk_out = epd;
+					break;
+				}
+			}
+
+			continue;
+		case USB_ENDPOINT_XFER_INT:
+			if (usb_endpoint_dir_in(epd)) {
+				if (int_in && !*int_in) {
+					*int_in = epd;
+					break;
+				}
+			} else {
+				if (int_out && !*int_out) {
+					*int_out = epd;
+					break;
+				}
+			}
+
+			continue;
+		default:
+			continue;
+		}
+
+		if ((!bulk_in || *bulk_in) &&
+				(!bulk_out || *bulk_out) &&
+				(!int_in || *int_in) &&
+				(!int_out || *int_out)) {
+			return 0;
+		}
+	}
+
+	return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(usb_find_common_endpoints);
+
+/**
  * usb_find_alt_setting() - Given a configuration, find the alternate setting
  * for the given interface.
  * @config: the configuration to search (not necessarily the current config).
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -99,6 +99,41 @@ enum usb_interface_condition {
 	USB_INTERFACE_UNBINDING,
 };
 
+int __must_check
+usb_find_common_endpoints(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in,
+		struct usb_endpoint_descriptor **bulk_out,
+		struct usb_endpoint_descriptor **int_in,
+		struct usb_endpoint_descriptor **int_out);
+
+static inline int __must_check
+usb_find_bulk_in_endpoint(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_in)
+{
+	return usb_find_common_endpoints(alt, bulk_in, NULL, NULL, NULL);
+}
+
+static inline int __must_check
+usb_find_bulk_out_endpoint(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **bulk_out)
+{
+	return usb_find_common_endpoints(alt, NULL, bulk_out, NULL, NULL);
+}
+
+static inline int __must_check
+usb_find_int_in_endpoint(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **int_in)
+{
+	return usb_find_common_endpoints(alt, NULL, NULL, int_in, NULL);
+}
+
+static inline int __must_check
+usb_find_int_out_endpoint(struct usb_host_interface *alt,
+		struct usb_endpoint_descriptor **int_out)
+{
+	return usb_find_common_endpoints(alt, NULL, NULL, NULL, int_out);
+}
+
 /**
  * struct usb_interface - what usb device drivers talk to
  * @altsetting: array of interface structures, one for each alternate

[PATCH 4.9 29/70] staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

commit fea22e159d51c766ba70473f473a0ec914cc7e92 upstream.

let's use usb_find_common_endpoints() to discover endpoints, it does all
necessary checks for type and xfer direction

remove memset() in hfa384x_create(), because we now assign endpoints in
prism2sta_probe_usb() and because create_wlan() uses kzalloc() to
allocate hfa384x struct before calling hfa384x_create()

Fixes: faaff9765664 ("staging: wlan-ng: properly check endpoint types")
Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53a
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/hfa384x_usb.c |    5 -----
 drivers/staging/wlan-ng/prism2usb.c   |   19 ++++++-------------
 2 files changed, 6 insertions(+), 18 deletions(-)

--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -523,13 +523,8 @@ static void hfa384x_usb_defer(struct wor
 ----------------------------------------------------------------*/
 void hfa384x_create(struct hfa384x *hw, struct usb_device *usb)
 {
-	memset(hw, 0, sizeof(struct hfa384x));
 	hw->usb = usb;
 
-	/* set up the endpoints */
-	hw->endp_in = usb_rcvbulkpipe(usb, 1);
-	hw->endp_out = usb_sndbulkpipe(usb, 2);
-
 	/* Set up the waitq */
 	init_waitqueue_head(&hw->cmdq);
 
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -60,23 +60,14 @@ static int prism2sta_probe_usb(struct us
 			       const struct usb_device_id *id)
 {
 	struct usb_device *dev;
-	const struct usb_endpoint_descriptor *epd;
-	const struct usb_host_interface *iface_desc = interface->cur_altsetting;
+	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
+	struct usb_host_interface *iface_desc = interface->cur_altsetting;
 	struct wlandevice *wlandev = NULL;
 	struct hfa384x *hw = NULL;
 	int result = 0;
 
-	if (iface_desc->desc.bNumEndpoints != 2) {
-		result = -ENODEV;
-		goto failed;
-	}
-
-	result = -EINVAL;
-	epd = &iface_desc->endpoint[1].desc;
-	if (!usb_endpoint_is_bulk_in(epd))
-		goto failed;
-	epd = &iface_desc->endpoint[2].desc;
-	if (!usb_endpoint_is_bulk_out(epd))
+	result = usb_find_common_endpoints(iface_desc, &bulk_in, &bulk_out, NULL, NULL);
+	if (result)
 		goto failed;
 
 	dev = interface_to_usbdev(interface);
@@ -95,6 +86,8 @@ static int prism2sta_probe_usb(struct us
 	}
 
 	/* Initialize the hw data */
+	hw->endp_in = usb_rcvbulkpipe(dev, bulk_in->bEndpointAddress);
+	hw->endp_out = usb_sndbulkpipe(dev, bulk_out->bEndpointAddress);
 	hfa384x_create(hw, dev);
 	hw->wlandev = wlandev;
 

[PATCH 4.9 30/70] btrfs: fix wrong address when faulting in pages in the search ioctl

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 1c78544eaa4660096aeb6a57ec82b42cdb3bfe5a upstream.

When faulting in the pages for the user supplied buffer for the search
ioctl, we are passing only the base address of the buffer to the function
fault_in_pages_writeable(). This means that after the first iteration of
the while loop that searches for leaves, when we have a non-zero offset,
stored in 'sk_offset', we try to fault in a wrong page range.

So fix this by adding the offset in 'sk_offset' to the base address of the
user supplied buffer when calling fault_in_pages_writeable().

Several users have reported that the applications compsize and bees have
started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix
potential deadlock in the search ioctl") was added to stable trees, and
these applications make heavy use of the search ioctls. This fixes their
issues.

Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/
Link: https://github.com/kilobyte/compsize/issues/34
Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl")
CC: stable@vger.kernel.org # 4.4+
Tested-by: A L <mail@lechevalier.se>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ioctl.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2151,7 +2151,8 @@ static noinline int search_ioctl(struct
 	key.offset = sk->min_offset;
 
 	while (1) {
-		ret = fault_in_pages_writeable(ubuf, *buf_size - sk_offset);
+		ret = fault_in_pages_writeable(ubuf + sk_offset,
+					       *buf_size - sk_offset);
 		if (ret)
 			break;
 

[PATCH 4.9 31/70] regulator: push allocation in set_consumer_device_supply() out of lock

[Greg Kroah-Hartman]

From: Michał Mirosław <mirq-linux@rere.qmqm.pl>

commit 5c06540165d443c6455123eb48e7f1a9b618ab34 upstream.

Pull regulator_list_mutex into set_consumer_device_supply() and keep
allocations outside of it. Fourth of the fs_reclaim deadlock case.

Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/core.c |   46 ++++++++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 20 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1191,7 +1191,7 @@ static int set_consumer_device_supply(st
 				      const char *consumer_dev_name,
 				      const char *supply)
 {
-	struct regulator_map *node;
+	struct regulator_map *node, *new_node;
 	int has_dev;
 
 	if (supply == NULL)
@@ -1202,6 +1202,22 @@ static int set_consumer_device_supply(st
 	else
 		has_dev = 0;
 
+	new_node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
+	if (new_node == NULL)
+		return -ENOMEM;
+
+	new_node->regulator = rdev;
+	new_node->supply = supply;
+
+	if (has_dev) {
+		new_node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
+		if (new_node->dev_name == NULL) {
+			kfree(new_node);
+			return -ENOMEM;
+		}
+	}
+
+	mutex_lock(&regulator_list_mutex);
 	list_for_each_entry(node, &regulator_map_list, list) {
 		if (node->dev_name && consumer_dev_name) {
 			if (strcmp(node->dev_name, consumer_dev_name) != 0)
@@ -1219,26 +1235,19 @@ static int set_consumer_device_supply(st
 			 node->regulator->desc->name,
 			 supply,
 			 dev_name(&rdev->dev), rdev_get_name(rdev));
-		return -EBUSY;
+		goto fail;
 	}
 
-	node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
-	if (node == NULL)
-		return -ENOMEM;
-
-	node->regulator = rdev;
-	node->supply = supply;
-
-	if (has_dev) {
-		node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
-		if (node->dev_name == NULL) {
-			kfree(node);
-			return -ENOMEM;
-		}
-	}
+	list_add(&new_node->list, &regulator_map_list);
+	mutex_unlock(&regulator_list_mutex);
 
-	list_add(&node->list, &regulator_map_list);
 	return 0;
+
+fail:
+	mutex_unlock(&regulator_list_mutex);
+	kfree(new_node->dev_name);
+	kfree(new_node);
+	return -EBUSY;
 }
 
 static void unset_regulator_supplies(struct regulator_dev *rdev)
@@ -4034,19 +4043,16 @@ regulator_register(const struct regulato
 
 	/* add consumers devices */
 	if (init_data) {
-		mutex_lock(&regulator_list_mutex);
 		for (i = 0; i < init_data->num_consumer_supplies; i++) {
 			ret = set_consumer_device_supply(rdev,
 				init_data->consumer_supplies[i].dev_name,
 				init_data->consumer_supplies[i].supply);
 			if (ret < 0) {
-				mutex_unlock(&regulator_list_mutex);
 				dev_err(dev, "Failed to set supply %s\n",
 					init_data->consumer_supplies[i].supply);
 				goto unset_supplies;
 			}
 		}
-		mutex_unlock(&regulator_list_mutex);
 	}
 
 	if (!rdev->desc->ops->get_voltage &&

[PATCH 4.9 32/70] scsi: target: iscsi: Fix data digest calculation

[Greg Kroah-Hartman]

From: Varun Prakash <varun@chelsio.com>

commit 5528d03183fe5243416c706f64b1faa518b05130 upstream.

Current code does not consider 'page_off' in data digest calculation. To
fix this, add a local variable 'first_sg' and set first_sg.offset to
sg->offset + page_off.

Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Christie <michael.christie@oralce.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1396,14 +1396,27 @@ static u32 iscsit_do_crypto_hash_sg(
 	sg = cmd->first_data_sg;
 	page_off = cmd->first_data_sg_off;
 
+	if (data_length && page_off) {
+		struct scatterlist first_sg;
+		u32 len = min_t(u32, data_length, sg->length - page_off);
+
+		sg_init_table(&first_sg, 1);
+		sg_set_page(&first_sg, sg_page(sg), len, sg->offset + page_off);
+
+		ahash_request_set_crypt(hash, &first_sg, NULL, len);
+		crypto_ahash_update(hash);
+
+		data_length -= len;
+		sg = sg_next(sg);
+	}
+
 	while (data_length) {
-		u32 cur_len = min_t(u32, data_length, (sg->length - page_off));
+		u32 cur_len = min_t(u32, data_length, sg->length);
 
 		ahash_request_set_crypt(hash, sg, NULL, cur_len);
 		crypto_ahash_update(hash);
 
 		data_length -= cur_len;
-		page_off = 0;
 		/* iscsit_map_iovec has already checked for invalid sg pointers */
 		sg = sg_next(sg);
 	}

[PATCH 4.9 33/70] scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem

[Greg Kroah-Hartman]

From: Hou Pu <houpu@bytedance.com>

commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream.

The iSCSI target login thread might get stuck with the following stack:

cat /proc/`pidof iscsi_np`/stack
[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30

This can be reproduced via the following steps:

1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing
   PDU exchange in the login thread and before the negotiation is finished
   the the network link goes down. At this point A has not finished login
   and tpg->np_login_sem is held.

2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing
   PDU exchange in the login thread the target expects to process remaining
   login PDUs in workqueue context.

3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new
   socket. A' will wait for tpg->np_login_sem with np->np_login_timer
   loaded to wait for at most 15 seconds. The lock is held by A so A'
   eventually times out.

4. Before A' got timeout initiator B gets negotiation failed and calls
   iscsi_target_login_drop()->iscsi_target_login_sess_out().  The
   np->np_login_timer is canceled and initiator A' will hang forever.
   Because A' is now in the login thread, no new login requests can be
   serviced.

Fix this by moving iscsi_stop_login_thread_timer() out of
iscsi_target_login_sess_out(). Also remove iscsi_np parameter from
iscsi_target_login_sess_out().

Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_login.c |    6 +++---
 drivers/target/iscsi/iscsi_target_login.h |    3 +--
 drivers/target/iscsi/iscsi_target_nego.c  |    3 +--
 3 files changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -1150,7 +1150,7 @@ iscsit_conn_set_transport(struct iscsi_c
 }
 
 void iscsi_target_login_sess_out(struct iscsi_conn *conn,
-		struct iscsi_np *np, bool zero_tsih, bool new_sess)
+				 bool zero_tsih, bool new_sess)
 {
 	if (!new_sess)
 		goto old_sess_out;
@@ -1172,7 +1172,6 @@ void iscsi_target_login_sess_out(struct
 	conn->sess = NULL;
 
 old_sess_out:
-	iscsi_stop_login_thread_timer(np);
 	/*
 	 * If login negotiation fails check if the Time2Retain timer
 	 * needs to be restarted.
@@ -1432,8 +1431,9 @@ static int __iscsi_target_login_thread(s
 new_sess_out:
 	new_sess = true;
 old_sess_out:
+	iscsi_stop_login_thread_timer(np);
 	tpg_np = conn->tpg_np;
-	iscsi_target_login_sess_out(conn, np, zero_tsih, new_sess);
+	iscsi_target_login_sess_out(conn, zero_tsih, new_sess);
 	new_sess = false;
 
 	if (tpg) {
--- a/drivers/target/iscsi/iscsi_target_login.h
+++ b/drivers/target/iscsi/iscsi_target_login.h
@@ -14,8 +14,7 @@ extern int iscsit_put_login_tx(struct is
 extern void iscsit_free_conn(struct iscsi_np *, struct iscsi_conn *);
 extern int iscsit_start_kthreads(struct iscsi_conn *);
 extern void iscsi_post_login_handler(struct iscsi_np *, struct iscsi_conn *, u8);
-extern void iscsi_target_login_sess_out(struct iscsi_conn *, struct iscsi_np *,
-				bool, bool);
+extern void iscsi_target_login_sess_out(struct iscsi_conn *, bool, bool);
 extern int iscsi_target_login_thread(void *);
 
 #endif   /*** ISCSI_TARGET_LOGIN_H ***/
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -548,12 +548,11 @@ static bool iscsi_target_sk_check_and_cl
 
 static void iscsi_target_login_drop(struct iscsi_conn *conn, struct iscsi_login *login)
 {
-	struct iscsi_np *np = login->np;
 	bool zero_tsih = login->zero_tsih;
 
 	iscsi_remove_failed_auth_entry(conn);
 	iscsi_target_nego_release(conn);
-	iscsi_target_login_sess_out(conn, np, zero_tsih, true);
+	iscsi_target_login_sess_out(conn, zero_tsih, true);
 }
 
 static void iscsi_target_login_timeout(unsigned long data)

[PATCH 4.9 34/70] rbd: require global CAP_SYS_ADMIN for mapping and unmapping

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit f44d04e696feaf13d192d942c4f14ad2e117065a upstream.

It turns out that currently we rely only on sysfs attribute
permissions:

  $ ll /sys/bus/rbd/{add*,remove*}
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/add_single_major
  --w------- 1 root root 4096 Sep  3 20:37 /sys/bus/rbd/remove
  --w------- 1 root root 4096 Sep  3 20:38 /sys/bus/rbd/remove_single_major

This means that images can be mapped and unmapped (i.e. block devices
can be created and deleted) by a UID 0 process even after it drops all
privileges or by any process with CAP_DAC_OVERRIDE in its user namespace
as long as UID 0 is mapped into that user namespace.

Be consistent with other virtual block devices (loop, nbd, dm, md, etc)
and require CAP_SYS_ADMIN in the initial user namespace for mapping and
unmapping, and also for dumping the configuration string and refreshing
the image header.

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/rbd.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -4614,6 +4614,9 @@ static ssize_t rbd_config_info_show(stru
 {
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	return sprintf(buf, "%s\n", rbd_dev->config_info);
 }
 
@@ -4715,6 +4718,9 @@ static ssize_t rbd_image_refresh(struct
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	ret = rbd_dev_refresh(rbd_dev);
 	if (ret)
 		return ret;
@@ -6192,6 +6198,9 @@ static ssize_t do_rbd_add(struct bus_typ
 	bool read_only;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	if (!try_module_get(THIS_MODULE))
 		return -ENODEV;
 
@@ -6340,6 +6349,9 @@ static ssize_t do_rbd_remove(struct bus_
 	bool force = false;
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	dev_id = -1;
 	opt_buf[0] = '\0';
 	sscanf(buf, "%d %5s", &dev_id, opt_buf);

[PATCH 4.9 35/70] fbcon: remove soft scrollback code

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 50145474f6ef4a9c19205b173da6264a644c7489 upstream.

This (and the VGA soft scrollback) turns out to have various nasty small
special cases that nobody really is willing to fight.  The soft
scrollback code was really useful a few decades ago when you typically
used the console interactively as the main way to interact with the
machine, but that just isn't the case any more.

So it's not worth dragging along.

Tested-by: Yuan Ming <yuanmingbuaa@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/console/fbcon.c |  334 ------------------------------------------
 1 file changed, 4 insertions(+), 330 deletions(-)

--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -101,12 +101,6 @@ static int logo_lines;
 /* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO
    enums.  */
 static int logo_shown = FBCON_LOGO_CANSHOW;
-/* Software scrollback */
-static int fbcon_softback_size = 32768;
-static unsigned long softback_buf, softback_curr;
-static unsigned long softback_in;
-static unsigned long softback_top, softback_end;
-static int softback_lines;
 /* console mappings */
 static int first_fb_vc;
 static int last_fb_vc = MAX_NR_CONSOLES - 1;
@@ -140,8 +134,6 @@ static int fbcon_has_sysfs;
 
 static const struct consw fb_con;
 
-#define CM_SOFTBACK	(8)
-
 #define advance_row(p, delta) (unsigned short *)((unsigned long)(p) + (delta) * vc->vc_size_row)
 
 static int fbcon_set_origin(struct vc_data *);
@@ -349,18 +341,6 @@ static int get_color(struct vc_data *vc,
 	return color;
 }
 
-static void fbcon_update_softback(struct vc_data *vc)
-{
-	int l = fbcon_softback_size / vc->vc_size_row;
-
-	if (l > 5)
-		softback_end = softback_buf + l * vc->vc_size_row;
-	else
-		/* Smaller scrollback makes no sense, and 0 would screw
-		   the operation totally */
-		softback_top = 0;
-}
-
 static void fb_flashcursor(struct work_struct *work)
 {
 	struct fb_info *info = container_of(work, struct fb_info, queue);
@@ -390,7 +370,7 @@ static void fb_flashcursor(struct work_s
 	c = scr_readw((u16 *) vc->vc_pos);
 	mode = (!ops->cursor_flash || ops->cursor_state.enable) ?
 		CM_ERASE : CM_DRAW;
-	ops->cursor(vc, info, mode, softback_lines, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 	console_unlock();
 }
@@ -450,13 +430,7 @@ static int __init fb_console_setup(char
 		}
 		
 		if (!strncmp(options, "scrollback:", 11)) {
-			options += 11;
-			if (*options) {
-				fbcon_softback_size = simple_strtoul(options, &options, 0);
-				if (*options == 'k' || *options == 'K') {
-					fbcon_softback_size *= 1024;
-				}
-			}
+			pr_warn("Ignoring scrollback size option\n");
 			continue;
 		}
 		
@@ -961,31 +935,6 @@ static const char *fbcon_startup(void)
 	p->con_rotate = initial_rotation;
 	set_blitting_type(vc, info);
 
-	if (info->fix.type != FB_TYPE_TEXT) {
-		if (fbcon_softback_size) {
-			if (!softback_buf) {
-				softback_buf =
-				    (unsigned long)
-				    kmalloc(fbcon_softback_size,
-					    GFP_KERNEL);
-				if (!softback_buf) {
-					fbcon_softback_size = 0;
-					softback_top = 0;
-				}
-			}
-		} else {
-			if (softback_buf) {
-				kfree((void *) softback_buf);
-				softback_buf = 0;
-				softback_top = 0;
-			}
-		}
-		if (softback_buf)
-			softback_in = softback_top = softback_curr =
-			    softback_buf;
-		softback_lines = 0;
-	}
-
 	/* Setup default font */
 	if (!p->fontdata && !vc->vc_font.data) {
 		if (!fontname[0] || !(font = find_font(fontname)))
@@ -1148,9 +1097,6 @@ static void fbcon_init(struct vc_data *v
 	if (logo)
 		fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
 
-	if (vc == svc && softback_buf)
-		fbcon_update_softback(vc);
-
 	if (ops->rotate_font && ops->rotate_font(info, vc)) {
 		ops->rotate = FB_ROTATE_UR;
 		set_blitting_type(vc, info);
@@ -1310,7 +1256,6 @@ static void fbcon_cursor(struct vc_data
 {
 	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
 	struct fbcon_ops *ops = info->fbcon_par;
-	int y;
  	int c = scr_readw((u16 *) vc->vc_pos);
 
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
@@ -1324,16 +1269,8 @@ static void fbcon_cursor(struct vc_data
 		fbcon_add_cursor_timer(info);
 
 	ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1;
-	if (mode & CM_SOFTBACK) {
-		mode &= ~CM_SOFTBACK;
-		y = softback_lines;
-	} else {
-		if (softback_lines)
-			fbcon_set_origin(vc);
-		y = 0;
-	}
 
-	ops->cursor(vc, info, mode, y, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 }
 
@@ -1404,8 +1341,6 @@ static void fbcon_set_disp(struct fb_inf
 
 	if (con_is_visible(vc)) {
 		update_screen(vc);
-		if (softback_buf)
-			fbcon_update_softback(vc);
 	}
 }
 
@@ -1543,99 +1478,6 @@ static __inline__ void ypan_down_redraw(
 	scrollback_current = 0;
 }
 
-static void fbcon_redraw_softback(struct vc_data *vc, struct display *p,
-				  long delta)
-{
-	int count = vc->vc_rows;
-	unsigned short *d, *s;
-	unsigned long n;
-	int line = 0;
-
-	d = (u16 *) softback_curr;
-	if (d == (u16 *) softback_in)
-		d = (u16 *) vc->vc_origin;
-	n = softback_curr + delta * vc->vc_size_row;
-	softback_lines -= delta;
-	if (delta < 0) {
-		if (softback_curr < softback_top && n < softback_buf) {
-			n += softback_end - softback_buf;
-			if (n < softback_top) {
-				softback_lines -=
-				    (softback_top - n) / vc->vc_size_row;
-				n = softback_top;
-			}
-		} else if (softback_curr >= softback_top
-			   && n < softback_top) {
-			softback_lines -=
-			    (softback_top - n) / vc->vc_size_row;
-			n = softback_top;
-		}
-	} else {
-		if (softback_curr > softback_in && n >= softback_end) {
-			n += softback_buf - softback_end;
-			if (n > softback_in) {
-				n = softback_in;
-				softback_lines = 0;
-			}
-		} else if (softback_curr <= softback_in && n > softback_in) {
-			n = softback_in;
-			softback_lines = 0;
-		}
-	}
-	if (n == softback_curr)
-		return;
-	softback_curr = n;
-	s = (u16 *) softback_curr;
-	if (s == (u16 *) softback_in)
-		s = (u16 *) vc->vc_origin;
-	while (count--) {
-		unsigned short *start;
-		unsigned short *le;
-		unsigned short c;
-		int x = 0;
-		unsigned short attr = 1;
-
-		start = s;
-		le = advance_row(s, 1);
-		do {
-			c = scr_readw(s);
-			if (attr != (c & 0xff00)) {
-				attr = c & 0xff00;
-				if (s > start) {
-					fbcon_putcs(vc, start, s - start,
-						    line, x);
-					x += s - start;
-					start = s;
-				}
-			}
-			if (c == scr_readw(d)) {
-				if (s > start) {
-					fbcon_putcs(vc, start, s - start,
-						    line, x);
-					x += s - start + 1;
-					start = s + 1;
-				} else {
-					x++;
-					start++;
-				}
-			}
-			s++;
-			d++;
-		} while (s < le);
-		if (s > start)
-			fbcon_putcs(vc, start, s - start, line, x);
-		line++;
-		if (d == (u16 *) softback_end)
-			d = (u16 *) softback_buf;
-		if (d == (u16 *) softback_in)
-			d = (u16 *) vc->vc_origin;
-		if (s == (u16 *) softback_end)
-			s = (u16 *) softback_buf;
-		if (s == (u16 *) softback_in)
-			s = (u16 *) vc->vc_origin;
-	}
-}
-
 static void fbcon_redraw_move(struct vc_data *vc, struct display *p,
 			      int line, int count, int dy)
 {
@@ -1775,31 +1617,6 @@ static void fbcon_redraw(struct vc_data
 	}
 }
 
-static inline void fbcon_softback_note(struct vc_data *vc, int t,
-				       int count)
-{
-	unsigned short *p;
-
-	if (vc->vc_num != fg_console)
-		return;
-	p = (unsigned short *) (vc->vc_origin + t * vc->vc_size_row);
-
-	while (count) {
-		scr_memcpyw((u16 *) softback_in, p, vc->vc_size_row);
-		count--;
-		p = advance_row(p, 1);
-		softback_in += vc->vc_size_row;
-		if (softback_in == softback_end)
-			softback_in = softback_buf;
-		if (softback_in == softback_top) {
-			softback_top += vc->vc_size_row;
-			if (softback_top == softback_end)
-				softback_top = softback_buf;
-		}
-	}
-	softback_curr = softback_in;
-}
-
 static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 			int count)
 {
@@ -1822,8 +1639,6 @@ static int fbcon_scroll(struct vc_data *
 	case SM_UP:
 		if (count > vc->vc_rows)	/* Maximum realistic size */
 			count = vc->vc_rows;
-		if (softback_top)
-			fbcon_softback_note(vc, t, count);
 		if (logo_shown >= 0)
 			goto redraw_up;
 		switch (p->scrollmode) {
@@ -2194,14 +2009,6 @@ static int fbcon_switch(struct vc_data *
 	info = registered_fb[con2fb_map[vc->vc_num]];
 	ops = info->fbcon_par;
 
-	if (softback_top) {
-		if (softback_lines)
-			fbcon_set_origin(vc);
-		softback_top = softback_curr = softback_in = softback_buf;
-		softback_lines = 0;
-		fbcon_update_softback(vc);
-	}
-
 	if (logo_shown >= 0) {
 		struct vc_data *conp2 = vc_cons[logo_shown].d;
 
@@ -2535,9 +2342,6 @@ static int fbcon_do_set_font(struct vc_d
 	int cnt;
 	char *old_data = NULL;
 
-	if (con_is_visible(vc) && softback_lines)
-		fbcon_set_origin(vc);
-
 	resize = (w != vc->vc_font.width) || (h != vc->vc_font.height);
 	if (p->userfont)
 		old_data = vc->vc_font.data;
@@ -2563,8 +2367,6 @@ static int fbcon_do_set_font(struct vc_d
 		cols /= w;
 		rows /= h;
 		vc_resize(vc, cols, rows);
-		if (con_is_visible(vc) && softback_buf)
-			fbcon_update_softback(vc);
 	} else if (con_is_visible(vc)
 		   && vc->vc_mode == KD_TEXT) {
 		fbcon_clear_margins(vc, 0);
@@ -2722,19 +2524,7 @@ static void fbcon_set_palette(struct vc_
 
 static u16 *fbcon_screen_pos(struct vc_data *vc, int offset)
 {
-	unsigned long p;
-	int line;
-	
-	if (vc->vc_num != fg_console || !softback_lines)
-		return (u16 *) (vc->vc_origin + offset);
-	line = offset / vc->vc_size_row;
-	if (line >= softback_lines)
-		return (u16 *) (vc->vc_origin + offset -
-				softback_lines * vc->vc_size_row);
-	p = softback_curr + offset;
-	if (p >= softback_end)
-		p += softback_buf - softback_end;
-	return (u16 *) p;
+	return (u16 *) (vc->vc_origin + offset);
 }
 
 static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos,
@@ -2748,22 +2538,7 @@ static unsigned long fbcon_getxy(struct
 
 		x = offset % vc->vc_cols;
 		y = offset / vc->vc_cols;
-		if (vc->vc_num == fg_console)
-			y += softback_lines;
 		ret = pos + (vc->vc_cols - x) * 2;
-	} else if (vc->vc_num == fg_console && softback_lines) {
-		unsigned long offset = pos - softback_curr;
-
-		if (pos < softback_curr)
-			offset += softback_end - softback_buf;
-		offset /= 2;
-		x = offset % vc->vc_cols;
-		y = offset / vc->vc_cols;
-		ret = pos + (vc->vc_cols - x) * 2;
-		if (ret == softback_end)
-			ret = softback_buf;
-		if (ret == softback_in)
-			ret = vc->vc_origin;
 	} else {
 		/* Should not happen */
 		x = y = 0;
@@ -2791,106 +2566,11 @@ static void fbcon_invert_region(struct v
 			a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) |
 			    (((a) & 0x0700) << 4);
 		scr_writew(a, p++);
-		if (p == (u16 *) softback_end)
-			p = (u16 *) softback_buf;
-		if (p == (u16 *) softback_in)
-			p = (u16 *) vc->vc_origin;
 	}
 }
 
-static void fbcon_scrolldelta(struct vc_data *vc, int lines)
-{
-	struct fb_info *info = registered_fb[con2fb_map[fg_console]];
-	struct fbcon_ops *ops = info->fbcon_par;
-	struct display *disp = &fb_display[fg_console];
-	int offset, limit, scrollback_old;
-
-	if (softback_top) {
-		if (vc->vc_num != fg_console)
-			return;
-		if (vc->vc_mode != KD_TEXT || !lines)
-			return;
-		if (logo_shown >= 0) {
-			struct vc_data *conp2 = vc_cons[logo_shown].d;
-
-			if (conp2->vc_top == logo_lines
-			    && conp2->vc_bottom == conp2->vc_rows)
-				conp2->vc_top = 0;
-			if (logo_shown == vc->vc_num) {
-				unsigned long p, q;
-				int i;
-
-				p = softback_in;
-				q = vc->vc_origin +
-				    logo_lines * vc->vc_size_row;
-				for (i = 0; i < logo_lines; i++) {
-					if (p == softback_top)
-						break;
-					if (p == softback_buf)
-						p = softback_end;
-					p -= vc->vc_size_row;
-					q -= vc->vc_size_row;
-					scr_memcpyw((u16 *) q, (u16 *) p,
-						    vc->vc_size_row);
-				}
-				softback_in = softback_curr = p;
-				update_region(vc, vc->vc_origin,
-					      logo_lines * vc->vc_cols);
-			}
-			logo_shown = FBCON_LOGO_CANSHOW;
-		}
-		fbcon_cursor(vc, CM_ERASE | CM_SOFTBACK);
-		fbcon_redraw_softback(vc, disp, lines);
-		fbcon_cursor(vc, CM_DRAW | CM_SOFTBACK);
-		return;
-	}
-
-	if (!scrollback_phys_max)
-		return;
-
-	scrollback_old = scrollback_current;
-	scrollback_current -= lines;
-	if (scrollback_current < 0)
-		scrollback_current = 0;
-	else if (scrollback_current > scrollback_max)
-		scrollback_current = scrollback_max;
-	if (scrollback_current == scrollback_old)
-		return;
-
-	if (fbcon_is_inactive(vc, info))
-		return;
-
-	fbcon_cursor(vc, CM_ERASE);
-
-	offset = disp->yscroll - scrollback_current;
-	limit = disp->vrows;
-	switch (disp->scrollmode) {
-	case SCROLL_WRAP_MOVE:
-		info->var.vmode |= FB_VMODE_YWRAP;
-		break;
-	case SCROLL_PAN_MOVE:
-	case SCROLL_PAN_REDRAW:
-		limit -= vc->vc_rows;
-		info->var.vmode &= ~FB_VMODE_YWRAP;
-		break;
-	}
-	if (offset < 0)
-		offset += limit;
-	else if (offset >= limit)
-		offset -= limit;
-
-	ops->var.xoffset = 0;
-	ops->var.yoffset = offset * vc->vc_font.height;
-	ops->update_start(info);
-
-	if (!scrollback_current)
-		fbcon_cursor(vc, CM_DRAW);
-}
-
 static int fbcon_set_origin(struct vc_data *vc)
 {
-	if (softback_lines)
-		fbcon_scrolldelta(vc, softback_lines);
 	return 0;
 }
 
@@ -2954,8 +2634,6 @@ static void fbcon_modechanged(struct fb_
 
 		fbcon_set_palette(vc, color_table);
 		update_screen(vc);
-		if (softback_buf)
-			fbcon_update_softback(vc);
 	}
 }
 
@@ -3375,7 +3053,6 @@ static const struct consw fb_con = {
 	.con_font_default	= fbcon_set_def_font,
 	.con_font_copy 		= fbcon_copy_font,
 	.con_set_palette 	= fbcon_set_palette,
-	.con_scrolldelta 	= fbcon_scrolldelta,
 	.con_set_origin 	= fbcon_set_origin,
 	.con_invert_region 	= fbcon_invert_region,
 	.con_screen_pos 	= fbcon_screen_pos,
@@ -3584,9 +3261,6 @@ static void fbcon_exit(void)
 	if (fbcon_has_exited)
 		return;
 
-	kfree((void *)softback_buf);
-	softback_buf = 0UL;
-
 	for (i = 0; i < FB_MAX; i++) {
 		int pending = 0;
 

[PATCH 4.9 36/70] fbcon: remove now unusued softback_lines cursor() argument

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 06a0df4d1b8b13b551668e47b11fd7629033b7df upstream.

Since the softscroll code got removed, this argument is always zero and
makes no sense any more.

Tested-by: Yuan Ming <yuanmingbuaa@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/console/bitblit.c   |   11 +----------
 drivers/video/console/fbcon.c     |    4 ++--
 drivers/video/console/fbcon.h     |    2 +-
 drivers/video/console/fbcon_ccw.c |   11 +----------
 drivers/video/console/fbcon_cw.c  |   11 +----------
 drivers/video/console/fbcon_ud.c  |   11 +----------
 drivers/video/console/tileblit.c  |    2 +-
 7 files changed, 8 insertions(+), 44 deletions(-)

--- a/drivers/video/console/bitblit.c
+++ b/drivers/video/console/bitblit.c
@@ -234,7 +234,7 @@ static void bit_clear_margins(struct vc_
 }
 
 static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg)
+		       int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -247,15 +247,6 @@ static void bit_cursor(struct vc_data *v
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = vc->vc_font.data + ((c & charmask) * (w * vc->vc_font.height));
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -370,7 +370,7 @@ static void fb_flashcursor(struct work_s
 	c = scr_readw((u16 *) vc->vc_pos);
 	mode = (!ops->cursor_flash || ops->cursor_state.enable) ?
 		CM_ERASE : CM_DRAW;
-	ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 	console_unlock();
 }
@@ -1270,7 +1270,7 @@ static void fbcon_cursor(struct vc_data
 
 	ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1;
 
-	ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 }
 
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -62,7 +62,7 @@ struct fbcon_ops {
 	void (*clear_margins)(struct vc_data *vc, struct fb_info *info,
 			      int bottom_only);
 	void (*cursor)(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg);
+		       int fg, int bg);
 	int  (*update_start)(struct fb_info *info);
 	int  (*rotate_font)(struct fb_info *info, struct vc_data *vc);
 	struct fb_var_screeninfo var;  /* copy of the current fb_var_screeninfo */
--- a/drivers/video/console/fbcon_ccw.c
+++ b/drivers/video/console/fbcon_ccw.c
@@ -219,7 +219,7 @@ static void ccw_clear_margins(struct vc_
 }
 
 static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg)
+		       int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -236,15 +236,6 @@ static void ccw_cursor(struct vc_data *v
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width));
--- a/drivers/video/console/fbcon_cw.c
+++ b/drivers/video/console/fbcon_cw.c
@@ -202,7 +202,7 @@ static void cw_clear_margins(struct vc_d
 }
 
 static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		      int softback_lines, int fg, int bg)
+		      int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -219,15 +219,6 @@ static void cw_cursor(struct vc_data *vc
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width));
--- a/drivers/video/console/fbcon_ud.c
+++ b/drivers/video/console/fbcon_ud.c
@@ -249,7 +249,7 @@ static void ud_clear_margins(struct vc_d
 }
 
 static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		      int softback_lines, int fg, int bg)
+		      int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -267,15 +267,6 @@ static void ud_cursor(struct vc_data *vc
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.height));
--- a/drivers/video/console/tileblit.c
+++ b/drivers/video/console/tileblit.c
@@ -80,7 +80,7 @@ static void tile_clear_margins(struct vc
 }
 
 static void tile_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-			int softback_lines, int fg, int bg)
+			int fg, int bg)
 {
 	struct fb_tilecursor cursor;
 	int use_sw = (vc->vc_cursor_type & 0x10);

[PATCH 4.9 37/70] vgacon: remove software scrollback support

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 973c096f6a85e5b5f2a295126ba6928d9a6afd45 upstream.

Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8c0 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.

We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more.  Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.

So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices.  Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad.  And maybe those people use the scrollback code.

If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.

Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/configs/pasemi_defconfig |    1 
 arch/powerpc/configs/ppc6xx_defconfig |    1 
 arch/x86/configs/i386_defconfig       |    1 
 arch/x86/configs/x86_64_defconfig     |    1 
 drivers/video/console/Kconfig         |   25 -----
 drivers/video/console/vgacon.c        |  159 ----------------------------------
 6 files changed, 1 insertion(+), 187 deletions(-)

--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -115,7 +115,6 @@ CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
 CONFIG_FB_RADEON=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -796,7 +796,6 @@ CONFIG_FB_TRIDENT=m
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
 CONFIG_LCD_PLATFORM=m
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -217,7 +217,6 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -212,7 +212,6 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -22,31 +22,6 @@ config VGA_CONSOLE
 
 	  Say Y.
 
-config VGACON_SOFT_SCROLLBACK
-       bool "Enable Scrollback Buffer in System RAM"
-       depends on VGA_CONSOLE
-       default n
-       help
-         The scrollback buffer of the standard VGA console is located in
-	 the VGA RAM.  The size of this RAM is fixed and is quite small.
-	 If you require a larger scrollback buffer, this can be placed in
-	 System RAM which is dynamically allocated during initialization.
-	 Placing the scrollback buffer in System RAM will slightly slow
-	 down the console.
-
-	 If you want this feature, say 'Y' here and enter the amount of
-	 RAM to allocate for this buffer.  If unsure, say 'N'.
-
-config VGACON_SOFT_SCROLLBACK_SIZE
-       int "Scrollback Buffer Size (in KB)"
-       depends on VGACON_SOFT_SCROLLBACK
-       range 1 1024
-       default "64"
-       help
-         Enter the amount of System RAM to allocate for the scrollback
-	 buffer.  Each 64KB will give you approximately 16 80x25
-	 screenfuls of scrollback buffer
-
 config MDA_CONSOLE
 	depends on !M68K && !PARISC && ISA
 	tristate "MDA text console (dual-headed)"
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -179,157 +179,6 @@ static inline void vga_set_mem_top(struc
 	write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2);
 }
 
-#ifdef CONFIG_VGACON_SOFT_SCROLLBACK
-/* software scrollback */
-static void *vgacon_scrollback;
-static int vgacon_scrollback_tail;
-static int vgacon_scrollback_size;
-static int vgacon_scrollback_rows;
-static int vgacon_scrollback_cnt;
-static int vgacon_scrollback_cur;
-static int vgacon_scrollback_save;
-static int vgacon_scrollback_restore;
-
-static void vgacon_scrollback_init(int pitch)
-{
-	int rows = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024/pitch;
-
-	if (vgacon_scrollback) {
-		vgacon_scrollback_cnt  = 0;
-		vgacon_scrollback_tail = 0;
-		vgacon_scrollback_cur  = 0;
-		vgacon_scrollback_rows = rows - 1;
-		vgacon_scrollback_size = rows * pitch;
-	}
-}
-
-static void vgacon_scrollback_startup(void)
-{
-	vgacon_scrollback = kcalloc(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, GFP_NOWAIT);
-	vgacon_scrollback_init(vga_video_num_columns * 2);
-}
-
-static void vgacon_scrollback_update(struct vc_data *c, int t, int count)
-{
-	void *p;
-
-	if (!vgacon_scrollback_size || c->vc_num != fg_console)
-		return;
-
-	p = (void *) (c->vc_origin + t * c->vc_size_row);
-
-	while (count--) {
-		if ((vgacon_scrollback_tail + c->vc_size_row) >
-		    vgacon_scrollback_size)
-			vgacon_scrollback_tail = 0;
-
-		scr_memcpyw(vgacon_scrollback + vgacon_scrollback_tail,
-			    p, c->vc_size_row);
-		vgacon_scrollback_cnt++;
-		p += c->vc_size_row;
-		vgacon_scrollback_tail += c->vc_size_row;
-
-		if (vgacon_scrollback_tail >= vgacon_scrollback_size)
-			vgacon_scrollback_tail = 0;
-
-		if (vgacon_scrollback_cnt > vgacon_scrollback_rows)
-			vgacon_scrollback_cnt = vgacon_scrollback_rows;
-
-		vgacon_scrollback_cur = vgacon_scrollback_cnt;
-	}
-}
-
-static void vgacon_restore_screen(struct vc_data *c)
-{
-	vgacon_scrollback_save = 0;
-
-	if (!vga_is_gfx && !vgacon_scrollback_restore) {
-		scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf,
-			    c->vc_screenbuf_size > vga_vram_size ?
-			    vga_vram_size : c->vc_screenbuf_size);
-		vgacon_scrollback_restore = 1;
-		vgacon_scrollback_cur = vgacon_scrollback_cnt;
-	}
-}
-
-static void vgacon_scrolldelta(struct vc_data *c, int lines)
-{
-	int start, end, count, soff;
-
-	if (!lines) {
-		c->vc_visible_origin = c->vc_origin;
-		vga_set_mem_top(c);
-		return;
-	}
-
-	if (!vgacon_scrollback)
-		return;
-
-	if (!vgacon_scrollback_save) {
-		vgacon_cursor(c, CM_ERASE);
-		vgacon_save_screen(c);
-		vgacon_scrollback_save = 1;
-	}
-
-	vgacon_scrollback_restore = 0;
-	start = vgacon_scrollback_cur + lines;
-	end = start + abs(lines);
-
-	if (start < 0)
-		start = 0;
-
-	if (start > vgacon_scrollback_cnt)
-		start = vgacon_scrollback_cnt;
-
-	if (end < 0)
-		end = 0;
-
-	if (end > vgacon_scrollback_cnt)
-		end = vgacon_scrollback_cnt;
-
-	vgacon_scrollback_cur = start;
-	count = end - start;
-	soff = vgacon_scrollback_tail - ((vgacon_scrollback_cnt - end) *
-					 c->vc_size_row);
-	soff -= count * c->vc_size_row;
-
-	if (soff < 0)
-		soff += vgacon_scrollback_size;
-
-	count = vgacon_scrollback_cnt - start;
-
-	if (count > c->vc_rows)
-		count = c->vc_rows;
-
-	if (count) {
-		int copysize;
-
-		int diff = c->vc_rows - count;
-		void *d = (void *) c->vc_origin;
-		void *s = (void *) c->vc_screenbuf;
-
-		count *= c->vc_size_row;
-		/* how much memory to end of buffer left? */
-		copysize = min(count, vgacon_scrollback_size - soff);
-		scr_memcpyw(d, vgacon_scrollback + soff, copysize);
-		d += copysize;
-		count -= copysize;
-
-		if (count) {
-			scr_memcpyw(d, vgacon_scrollback, count);
-			d += count;
-		}
-
-		if (diff)
-			scr_memcpyw(d, s, diff * c->vc_size_row);
-	} else
-		vgacon_cursor(c, CM_MOVE);
-}
-#else
-#define vgacon_scrollback_startup(...) do { } while (0)
-#define vgacon_scrollback_init(...)    do { } while (0)
-#define vgacon_scrollback_update(...)  do { } while (0)
-
 static void vgacon_restore_screen(struct vc_data *c)
 {
 	if (c->vc_origin != c->vc_visible_origin)
@@ -365,7 +214,6 @@ static void vgacon_scrolldelta(struct vc
 	}
 	vga_set_mem_top(c);
 }
-#endif /* CONFIG_VGACON_SOFT_SCROLLBACK */
 
 static const char *vgacon_startup(void)
 {
@@ -562,10 +410,7 @@ static const char *vgacon_startup(void)
 	vgacon_xres = screen_info.orig_video_cols * VGA_FONTWIDTH;
 	vgacon_yres = vga_scan_lines;
 
-	if (!vga_init_done) {
-		vgacon_scrollback_startup();
-		vga_init_done = 1;
-	}
+	vga_init_done = 1;
 
 	return display_desc;
 }
@@ -861,7 +706,6 @@ static int vgacon_switch(struct vc_data
 			vgacon_doresize(c, c->vc_cols, c->vc_rows);
 	}
 
-	vgacon_scrollback_init(c->vc_size_row);
 	return 0;		/* Redrawing not needed */
 }
 
@@ -1391,7 +1235,6 @@ static int vgacon_scroll(struct vc_data
 	oldo = c->vc_origin;
 	delta = lines * c->vc_size_row;
 	if (dir == SM_UP) {
-		vgacon_scrollback_update(c, t, lines);
 		if (c->vc_scr_end + delta >= vga_vram_end) {
 			scr_memcpyw((u16 *) vga_vram_base,
 				    (u16 *) (oldo + delta),

[PATCH 4.9 38/70] KVM: VMX: Dont freeze guest when event delivery causes an APIC-access exit

[Greg Kroah-Hartman]

From: Wanpeng Li <wanpengli@tencent.com>

commit 99b82a1437cb31340dbb2c437a2923b9814a7b15 upstream.

According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -8606,6 +8606,7 @@ static int vmx_handle_exit(struct kvm_vc
 			(exit_reason != EXIT_REASON_EXCEPTION_NMI &&
 			exit_reason != EXIT_REASON_EPT_VIOLATION &&
 			exit_reason != EXIT_REASON_PML_FULL &&
+			exit_reason != EXIT_REASON_APIC_ACCESS &&
 			exit_reason != EXIT_REASON_TASK_SWITCH)) {
 		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV;

[PATCH 4.9 39/70] video: fbdev: fix OOB read in vga_8planes_imageblit()

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

commit bd018a6a75cebb511bb55a0e7690024be975fe93 upstream.

syzbot is reporting OOB read at vga_8planes_imageblit() [1], for
"cdat[y] >> 4" can become a negative value due to "const char *cdat".

[1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132

Reported-by: syzbot <syzbot+69fbd3e01470f169c8c4@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/vga16fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/video/fbdev/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
@@ -1122,7 +1122,7 @@ static void vga_8planes_imageblit(struct
         char oldop = setop(0);
         char oldsr = setsr(0);
         char oldmask = selectmask();
-        const char *cdat = image->data;
+	const unsigned char *cdat = image->data;
 	u32 dx = image->dx;
         char __iomem *where;
         int y;

[PATCH 4.9 40/70] staging: greybus: audio: fix uninitialized value issue

[Greg Kroah-Hartman]

From: Vaibhav Agarwal <vaibhav.sr@gmail.com>

commit 1dffeb8b8b4c261c45416d53c75ea51e6ece1770 upstream.

The current implementation for gbcodec_mixer_dapm_ctl_put() uses
uninitialized gbvalue for comparison with updated value. This was found
using static analysis with coverity.

Uninitialized scalar variable (UNINIT)
11. uninit_use: Using uninitialized value
gbvalue.value.integer_value[0].
460        if (gbvalue.value.integer_value[0] != val) {

This patch fixes the issue with fetching the gbvalue before using it for
    comparision.

Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/bc4f29eb502ccf93cd2ffd98db0e319fa7d0f247.1597408126.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/greybus/audio_topology.c |   29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/staging/greybus/audio_topology.c
+++ b/drivers/staging/greybus/audio_topology.c
@@ -462,6 +462,15 @@ static int gbcodec_mixer_dapm_ctl_put(st
 	val = ucontrol->value.integer.value[0] & mask;
 	connect = !!val;
 
+	ret = gb_pm_runtime_get_sync(bundle);
+	if (ret)
+		return ret;
+
+	ret = gb_audio_gb_get_control(module->mgmt_connection, data->ctl_id,
+				      GB_AUDIO_INVALID_INDEX, &gbvalue);
+	if (ret)
+		goto exit;
+
 	/* update ucontrol */
 	if (gbvalue.value.integer_value[0] != val) {
 		for (wi = 0; wi < wlist->num_widgets; wi++) {
@@ -475,25 +484,17 @@ static int gbcodec_mixer_dapm_ctl_put(st
 		gbvalue.value.integer_value[0] =
 			ucontrol->value.integer.value[0];
 
-		ret = gb_pm_runtime_get_sync(bundle);
-		if (ret)
-			return ret;
-
 		ret = gb_audio_gb_set_control(module->mgmt_connection,
 					      data->ctl_id,
 					      GB_AUDIO_INVALID_INDEX, &gbvalue);
-
-		gb_pm_runtime_put_autosuspend(bundle);
-
-		if (ret) {
-			dev_err_ratelimited(codec->dev,
-					    "%d:Error in %s for %s\n", ret,
-					    __func__, kcontrol->id.name);
-			return ret;
-		}
 	}
 
-	return 0;
+exit:
+	gb_pm_runtime_put_autosuspend(bundle);
+	if (ret)
+		dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret,
+				    __func__, kcontrol->id.name);
+	return ret;
 }
 
 #define SOC_DAPM_MIXER_GB(xname, kcount, data) \

[PATCH 4.9 41/70] usb: core: fix slab-out-of-bounds Read in read_descriptors

[Greg Kroah-Hartman]

From: Zeng Tao <prime.zeng@hisilicon.com>

commit a18cd6c9b6bc73dc17e8b7e9bd07decaa8833c97 upstream.

The USB device descriptor may get changed between two consecutive
enumerations on the same device for some reason, such as DFU or
malicius device.
In that case, we may access the changing descriptor if we don't take
the device lock here.

The issue is reported:
https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9

Cc: stable <stable@vger.kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com
Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/sysfs.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -848,7 +848,11 @@ read_descriptors(struct file *filp, stru
 	size_t srclen, n;
 	int cfgno;
 	void *src;
+	int retval;
 
+	retval = usb_lock_device_interruptible(udev);
+	if (retval < 0)
+		return -EINTR;
 	/* The binary attribute begins with the device descriptor.
 	 * Following that are the raw descriptor entries for all the
 	 * configurations (config plus subsidiary descriptors).
@@ -873,6 +877,7 @@ read_descriptors(struct file *filp, stru
 			off -= srclen;
 		}
 	}
+	usb_unlock_device(udev);
 	return count - nleft;
 }
 

[PATCH 4.9 42/70] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

[Greg Kroah-Hartman]

From: Patrick Riphagen <patrick.riphagen@xsens.com>

commit 6ccc48e0eb2f3a5f3bd39954a21317e5f8874726 upstream.

The device added has an FTDI chip inside.
The device is used to connect Xsens USB Motion Trackers.

Cc: stable@vger.kernel.org
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -708,6 +708,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -159,6 +159,7 @@
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
 #define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID	0x0301	/* MTi USB converter */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */

[PATCH 4.9 43/70] USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules

[Greg Kroah-Hartman]

From: Aleksander Morgado <aleksander@aleksander.es>

commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream.

These modules have 2 different USB layouts:

The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and
an ECM interface:

  T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=1e0e ProdID=9205 Rev=00.00
  S:  Manufacturer=SimTech, Incorporated
  S:  Product=SimTech SIM7080
  S:  SerialNumber=1234567890ABCDEF
  C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
  I:  If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

The purpose of each TTY is as follows:
 * ttyUSB0: DIAG/QCDM port.
 * ttyUSB1: GNSS data.
 * ttyUSB2: AT-capable port (control).
 * ttyUSB3: AT-capable port (data).

In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module
exposes 6 TTY ports:

  T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1e0e ProdID=9206 Rev=00.00
  S:  Manufacturer=SimTech, Incorporated
  S:  Product=SimTech SIM7080
  S:  SerialNumber=1234567890ABCDEF
  C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
  I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
  I:  If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

The purpose of each TTY is as follows:
 * ttyUSB0: DIAG/QCDM port.
 * ttyUSB1: GNSS data.
 * ttyUSB2: AT-capable port (control).
 * ttyUSB3: QFLOG interface.
 * ttyUSB4: DAM interface.
 * ttyUSB5: AT-capable port (data).

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1808,6 +1808,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),

[PATCH 4.9 44/70] usb: Fix out of sync data toggle if a configured device is reconfigured

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit cfd54fa83a5068b61b7eb28d3c117d8354c74c7a upstream.

Userspace drivers that use a SetConfiguration() request to "lightweight"
reset an already configured usb device might cause data toggles to get out
of sync between the device and host, and the device becomes unusable.

The xHCI host requires endpoints to be dropped and added back to reset the
toggle. If USB core notices the new configuration is the same as the
current active configuration it will avoid these extra steps by calling
usb_reset_configuration() instead of usb_set_configuration().

A SetConfiguration() request will reset the device side data toggles.
Make sure usb_reset_configuration() function also drops and adds back the
endpoints to ensure data toggles are in sync.

To avoid code duplication split the current usb_disable_device() function
and reuse the endpoint specific part.

Cc: stable <stable@vger.kernel.org>
Tested-by: Martin Thierer <mthierer@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/message.c |   93 ++++++++++++++++++++-------------------------
 1 file changed, 43 insertions(+), 50 deletions(-)

--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1142,6 +1142,34 @@ void usb_disable_interface(struct usb_de
 	}
 }
 
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i;
+
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+	}
+	/* Second pass: remove endpoint pointers */
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
 /**
  * usb_disable_device - Disable all the endpoints for a USB device
  * @dev: the device whose endpoints are being disabled
@@ -1155,7 +1183,6 @@ void usb_disable_interface(struct usb_de
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
-	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1201,22 +1228,8 @@ void usb_disable_device(struct usb_devic
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
-	if (hcd->driver->check_bandwidth) {
-		/* First pass: Cancel URBs, leave endpoint pointers intact. */
-		for (i = skip_ep0; i < 16; ++i) {
-			usb_disable_endpoint(dev, i, false);
-			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
-		}
-		/* Remove endpoints from the host controller internal state */
-		mutex_lock(hcd->bandwidth_mutex);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(hcd->bandwidth_mutex);
-		/* Second pass: remove endpoint pointers */
-	}
-	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+
+	usb_disable_device_endpoints(dev, skip_ep0);
 }
 
 /**
@@ -1459,6 +1472,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * The caller must own the device lock.
  *
  * Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
  */
 int usb_reset_configuration(struct usb_device *dev)
 {
@@ -1474,10 +1490,7 @@ int usb_reset_configuration(struct usb_d
 	 * calls during probe() are fine
 	 */
 
-	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+	usb_disable_device_endpoints(dev, 1); /* skip ep0*/
 
 	config = dev->actconfig;
 	retval = 0;
@@ -1490,34 +1503,10 @@ int usb_reset_configuration(struct usb_d
 		mutex_unlock(hcd->bandwidth_mutex);
 		return -ENOMEM;
 	}
-	/* Make sure we have enough bandwidth for each alternate setting 0 */
-	for (i = 0; i < config->desc.bNumInterfaces; i++) {
-		struct usb_interface *intf = config->interface[i];
-		struct usb_host_interface *alt;
-
-		alt = usb_altnum_to_altsetting(intf, 0);
-		if (!alt)
-			alt = &intf->altsetting[0];
-		if (alt != intf->cur_altsetting)
-			retval = usb_hcd_alloc_bandwidth(dev, NULL,
-					intf->cur_altsetting, alt);
-		if (retval < 0)
-			break;
-	}
-	/* If not, reinstate the old alternate settings */
+
+	/* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+	retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
 	if (retval < 0) {
-reset_old_alts:
-		for (i--; i >= 0; i--) {
-			struct usb_interface *intf = config->interface[i];
-			struct usb_host_interface *alt;
-
-			alt = usb_altnum_to_altsetting(intf, 0);
-			if (!alt)
-				alt = &intf->altsetting[0];
-			if (alt != intf->cur_altsetting)
-				usb_hcd_alloc_bandwidth(dev, NULL,
-						alt, intf->cur_altsetting);
-		}
 		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
@@ -1526,8 +1515,12 @@ reset_old_alts:
 			USB_REQ_SET_CONFIGURATION, 0,
 			config->desc.bConfigurationValue, 0,
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (retval < 0)
-		goto reset_old_alts;
+	if (retval < 0) {
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
 	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */

[PATCH 4.9 45/70] IB/rxe: Remove a pointless indirection layer

[Greg Kroah-Hartman]

From: Bart Van Assche <bart.vanassche@sandisk.com>

[ Upstream commit 839f5ac0d806970a102117be03ef05272c50d20e ]

Neither rxe->ifc_ops nor any of the function pointers in struct
struct rxe_ifc_ops ever change. Hence remove the rxe->ifc_ops
indirection mechanism.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe.c       |  2 +-
 drivers/infiniband/sw/rxe/rxe_loc.h   | 20 +++++++++++--
 drivers/infiniband/sw/rxe/rxe_mcast.c |  4 +--
 drivers/infiniband/sw/rxe/rxe_net.c   | 43 ++++++++-------------------
 drivers/infiniband/sw/rxe/rxe_req.c   |  4 +--
 drivers/infiniband/sw/rxe/rxe_resp.c  |  4 +--
 drivers/infiniband/sw/rxe/rxe_verbs.c | 10 +++----
 drivers/infiniband/sw/rxe/rxe_verbs.h | 22 --------------
 8 files changed, 42 insertions(+), 67 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index c11d33a30183c..9f62345855321 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -175,7 +175,7 @@ static int rxe_init_ports(struct rxe_dev *rxe)
 		return -ENOMEM;
 
 	port->pkey_tbl[0] = 0xffff;
-	port->port_guid = rxe->ifc_ops->port_guid(rxe);
+	port->port_guid = rxe_port_guid(rxe);
 
 	spin_lock_init(&port->port_lock);
 
diff --git a/drivers/infiniband/sw/rxe/rxe_loc.h b/drivers/infiniband/sw/rxe/rxe_loc.h
index 73849a5a91b3a..cd7663062d015 100644
--- a/drivers/infiniband/sw/rxe/rxe_loc.h
+++ b/drivers/infiniband/sw/rxe/rxe_loc.h
@@ -141,6 +141,22 @@ void rxe_mem_cleanup(void *arg);
 
 int advance_dma_data(struct rxe_dma_info *dma, unsigned int length);
 
+/* rxe_net.c */
+int rxe_loopback(struct sk_buff *skb);
+int rxe_send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
+	     struct sk_buff *skb);
+__be64 rxe_port_guid(struct rxe_dev *rxe);
+struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,
+				int paylen, struct rxe_pkt_info *pkt);
+int rxe_prepare(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
+		struct sk_buff *skb, u32 *crc);
+enum rdma_link_layer rxe_link_layer(struct rxe_dev *rxe, unsigned int port_num);
+const char *rxe_parent_name(struct rxe_dev *rxe, unsigned int port_num);
+struct device *rxe_dma_device(struct rxe_dev *rxe);
+__be64 rxe_node_guid(struct rxe_dev *rxe);
+int rxe_mcast_add(struct rxe_dev *rxe, union ib_gid *mgid);
+int rxe_mcast_delete(struct rxe_dev *rxe, union ib_gid *mgid);
+
 /* rxe_qp.c */
 int rxe_qp_chk_init(struct rxe_dev *rxe, struct ib_qp_init_attr *init);
 
@@ -256,9 +272,9 @@ static inline int rxe_xmit_packet(struct rxe_dev *rxe, struct rxe_qp *qp,
 
 	if (pkt->mask & RXE_LOOPBACK_MASK) {
 		memcpy(SKB_TO_PKT(skb), pkt, sizeof(*pkt));
-		err = rxe->ifc_ops->loopback(skb);
+		err = rxe_loopback(skb);
 	} else {
-		err = rxe->ifc_ops->send(rxe, pkt, skb);
+		err = rxe_send(rxe, pkt, skb);
 	}
 
 	if (err) {
diff --git a/drivers/infiniband/sw/rxe/rxe_mcast.c b/drivers/infiniband/sw/rxe/rxe_mcast.c
index fa95544ca7e01..890eb6d5c471e 100644
--- a/drivers/infiniband/sw/rxe/rxe_mcast.c
+++ b/drivers/infiniband/sw/rxe/rxe_mcast.c
@@ -61,7 +61,7 @@ int rxe_mcast_get_grp(struct rxe_dev *rxe, union ib_gid *mgid,
 
 	rxe_add_key(grp, mgid);
 
-	err = rxe->ifc_ops->mcast_add(rxe, mgid);
+	err = rxe_mcast_add(rxe, mgid);
 	if (err)
 		goto err2;
 
@@ -186,5 +186,5 @@ void rxe_mc_cleanup(void *arg)
 	struct rxe_dev *rxe = grp->rxe;
 
 	rxe_drop_key(grp);
-	rxe->ifc_ops->mcast_delete(rxe, &grp->mgid);
+	rxe_mcast_delete(rxe, &grp->mgid);
 }
diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c
index d19e003e8381e..e392612345282 100644
--- a/drivers/infiniband/sw/rxe/rxe_net.c
+++ b/drivers/infiniband/sw/rxe/rxe_net.c
@@ -102,17 +102,17 @@ static __be64 rxe_mac_to_eui64(struct net_device *ndev)
 	return eui64;
 }
 
-static __be64 node_guid(struct rxe_dev *rxe)
+__be64 rxe_node_guid(struct rxe_dev *rxe)
 {
 	return rxe_mac_to_eui64(rxe->ndev);
 }
 
-static __be64 port_guid(struct rxe_dev *rxe)
+__be64 rxe_port_guid(struct rxe_dev *rxe)
 {
 	return rxe_mac_to_eui64(rxe->ndev);
 }
 
-static struct device *dma_device(struct rxe_dev *rxe)
+struct device *rxe_dma_device(struct rxe_dev *rxe)
 {
 	struct net_device *ndev;
 
@@ -124,7 +124,7 @@ static struct device *dma_device(struct rxe_dev *rxe)
 	return ndev->dev.parent;
 }
 
-static int mcast_add(struct rxe_dev *rxe, union ib_gid *mgid)
+int rxe_mcast_add(struct rxe_dev *rxe, union ib_gid *mgid)
 {
 	int err;
 	unsigned char ll_addr[ETH_ALEN];
@@ -135,7 +135,7 @@ static int mcast_add(struct rxe_dev *rxe, union ib_gid *mgid)
 	return err;
 }
 
-static int mcast_delete(struct rxe_dev *rxe, union ib_gid *mgid)
+int rxe_mcast_delete(struct rxe_dev *rxe, union ib_gid *mgid)
 {
 	int err;
 	unsigned char ll_addr[ETH_ALEN];
@@ -399,8 +399,8 @@ static int prepare6(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
 	return 0;
 }
 
-static int prepare(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
-		   struct sk_buff *skb, u32 *crc)
+int rxe_prepare(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
+		struct sk_buff *skb, u32 *crc)
 {
 	int err = 0;
 	struct rxe_av *av = rxe_get_av(pkt);
@@ -426,8 +426,7 @@ static void rxe_skb_tx_dtor(struct sk_buff *skb)
 		rxe_run_task(&qp->req.task, 1);
 }
 
-static int send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
-		struct sk_buff *skb)
+int rxe_send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt, struct sk_buff *skb)
 {
 	struct sk_buff *nskb;
 	struct rxe_av *av;
@@ -462,7 +461,7 @@ static int send(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
 	return 0;
 }
 
-static int loopback(struct sk_buff *skb)
+int rxe_loopback(struct sk_buff *skb)
 {
 	return rxe_rcv(skb);
 }
@@ -472,8 +471,8 @@ static inline int addr_same(struct rxe_dev *rxe, struct rxe_av *av)
 	return rxe->port.port_guid == av->grh.dgid.global.interface_id;
 }
 
-static struct sk_buff *init_packet(struct rxe_dev *rxe, struct rxe_av *av,
-				   int paylen, struct rxe_pkt_info *pkt)
+struct sk_buff *rxe_init_packet(struct rxe_dev *rxe, struct rxe_av *av,
+				int paylen, struct rxe_pkt_info *pkt)
 {
 	unsigned int hdr_len;
 	struct sk_buff *skb;
@@ -512,31 +511,16 @@ static struct sk_buff *init_packet(struct rxe_dev *rxe, struct rxe_av *av,
  * this is required by rxe_cfg to match rxe devices in
  * /sys/class/infiniband up with their underlying ethernet devices
  */
-static char *parent_name(struct rxe_dev *rxe, unsigned int port_num)
+const char *rxe_parent_name(struct rxe_dev *rxe, unsigned int port_num)
 {
 	return rxe->ndev->name;
 }
 
-static enum rdma_link_layer link_layer(struct rxe_dev *rxe,
-				       unsigned int port_num)
+enum rdma_link_layer rxe_link_layer(struct rxe_dev *rxe, unsigned int port_num)
 {
 	return IB_LINK_LAYER_ETHERNET;
 }
 
-static struct rxe_ifc_ops ifc_ops = {
-	.node_guid	= node_guid,
-	.port_guid	= port_guid,
-	.dma_device	= dma_device,
-	.mcast_add	= mcast_add,
-	.mcast_delete	= mcast_delete,
-	.prepare	= prepare,
-	.send		= send,
-	.loopback	= loopback,
-	.init_packet	= init_packet,
-	.parent_name	= parent_name,
-	.link_layer	= link_layer,
-};
-
 struct rxe_dev *rxe_net_add(struct net_device *ndev)
 {
 	int err;
@@ -546,7 +530,6 @@ struct rxe_dev *rxe_net_add(struct net_device *ndev)
 	if (!rxe)
 		return NULL;
 
-	rxe->ifc_ops = &ifc_ops;
 	rxe->ndev = ndev;
 
 	err = rxe_add(rxe, ndev->mtu);
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index 6fb771290c566..5a2d7b0050f4c 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -412,7 +412,7 @@ static struct sk_buff *init_req_packet(struct rxe_qp *qp,
 
 	/* init skb */
 	av = rxe_get_av(pkt);
-	skb = rxe->ifc_ops->init_packet(rxe, av, paylen, pkt);
+	skb = rxe_init_packet(rxe, av, paylen, pkt);
 	if (unlikely(!skb))
 		return NULL;
 
@@ -483,7 +483,7 @@ static int fill_packet(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
 	u32 *p;
 	int err;
 
-	err = rxe->ifc_ops->prepare(rxe, pkt, skb, &crc);
+	err = rxe_prepare(rxe, pkt, skb, &crc);
 	if (err)
 		return err;
 
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index 5bfea23f3b60c..5733d9d2fcdcc 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -600,7 +600,7 @@ static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 	pad = (-payload) & 0x3;
 	paylen = rxe_opcode[opcode].length + payload + pad + RXE_ICRC_SIZE;
 
-	skb = rxe->ifc_ops->init_packet(rxe, &qp->pri_av, paylen, ack);
+	skb = rxe_init_packet(rxe, &qp->pri_av, paylen, ack);
 	if (!skb)
 		return NULL;
 
@@ -629,7 +629,7 @@ static struct sk_buff *prepare_ack_packet(struct rxe_qp *qp,
 	if (ack->mask & RXE_ATMACK_MASK)
 		atmack_set_orig(ack, qp->resp.atomic_orig);
 
-	err = rxe->ifc_ops->prepare(rxe, ack, skb, &crc);
+	err = rxe_prepare(rxe, ack, skb, &crc);
 	if (err) {
 		kfree_skb(skb);
 		return NULL;
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index ef13082d6ca1a..26d66431f95b7 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -234,7 +234,7 @@ static enum rdma_link_layer rxe_get_link_layer(struct ib_device *dev,
 {
 	struct rxe_dev *rxe = to_rdev(dev);
 
-	return rxe->ifc_ops->link_layer(rxe, port_num);
+	return rxe_link_layer(rxe, port_num);
 }
 
 static struct ib_ucontext *rxe_alloc_ucontext(struct ib_device *dev,
@@ -1194,10 +1194,8 @@ static ssize_t rxe_show_parent(struct device *device,
 {
 	struct rxe_dev *rxe = container_of(device, struct rxe_dev,
 					   ib_dev.dev);
-	char *name;
 
-	name = rxe->ifc_ops->parent_name(rxe, 1);
-	return snprintf(buf, 16, "%s\n", name);
+	return snprintf(buf, 16, "%s\n", rxe_parent_name(rxe, 1));
 }
 
 static DEVICE_ATTR(parent, S_IRUGO, rxe_show_parent, NULL);
@@ -1219,9 +1217,9 @@ int rxe_register_device(struct rxe_dev *rxe)
 	dev->node_type = RDMA_NODE_IB_CA;
 	dev->phys_port_cnt = 1;
 	dev->num_comp_vectors = RXE_NUM_COMP_VECTORS;
-	dev->dma_device = rxe->ifc_ops->dma_device(rxe);
+	dev->dma_device = rxe_dma_device(rxe);
 	dev->local_dma_lkey = 0;
-	dev->node_guid = rxe->ifc_ops->node_guid(rxe);
+	dev->node_guid = rxe_node_guid(rxe);
 	dev->dma_ops = &rxe_dma_mapping_ops;
 
 	dev->uverbs_abi_ver = RXE_UVERBS_ABI_VERSION;
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index dee3853163b60..d4a84f49dfd80 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -373,26 +373,6 @@ struct rxe_port {
 	u32			qp_gsi_index;
 };
 
-/* callbacks from rdma_rxe to network interface layer */
-struct rxe_ifc_ops {
-	void (*release)(struct rxe_dev *rxe);
-	__be64 (*node_guid)(struct rxe_dev *rxe);
-	__be64 (*port_guid)(struct rxe_dev *rxe);
-	struct device *(*dma_device)(struct rxe_dev *rxe);
-	int (*mcast_add)(struct rxe_dev *rxe, union ib_gid *mgid);
-	int (*mcast_delete)(struct rxe_dev *rxe, union ib_gid *mgid);
-	int (*prepare)(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
-		       struct sk_buff *skb, u32 *crc);
-	int (*send)(struct rxe_dev *rxe, struct rxe_pkt_info *pkt,
-		    struct sk_buff *skb);
-	int (*loopback)(struct sk_buff *skb);
-	struct sk_buff *(*init_packet)(struct rxe_dev *rxe, struct rxe_av *av,
-				       int paylen, struct rxe_pkt_info *pkt);
-	char *(*parent_name)(struct rxe_dev *rxe, unsigned int port_num);
-	enum rdma_link_layer (*link_layer)(struct rxe_dev *rxe,
-					   unsigned int port_num);
-};
-
 struct rxe_dev {
 	struct ib_device	ib_dev;
 	struct ib_device_attr	attr;
@@ -401,8 +381,6 @@ struct rxe_dev {
 	struct kref		ref_cnt;
 	struct mutex	usdev_lock;
 
-	struct rxe_ifc_ops	*ifc_ops;
-
 	struct net_device	*ndev;
 
 	int			xmit_errors;
-- 
2.25.1

[PATCH 4.9 46/70] RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars

[Greg Kroah-Hartman]

From: Yi Zhang <yi.zhang@redhat.com>

[ Upstream commit 60b1af64eb35074a4f2d41cc1e503a7671e68963 ]

'parent' sysfs reads will yield '\0' bytes when the interface name has 15
chars, and there will no "\n" output.

To reproduce, create one interface with 15 chars:

 [root@test ~]# ip a s enp0s29u1u7u3c2
 2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
     link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute
        valid_lft forever preferred_lft forever
 [root@test ~]# modprobe rdma_rxe
 [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add
 [root@test ~]# cat /sys/class/infiniband/rxe0/parent
 enp0s29u1u7u3c2[root@test ~]#
 [root@test ~]# f="/sys/class/infiniband/rxe0/parent"
 [root@test ~]# echo "$(<"$f")"
 -bash: warning: command substitution: ignored null byte in input
 enp0s29u1u7u3c2

Use scnprintf and PAGE_SIZE to fill the sysfs output buffer.

Cc: stable@vger.kernel.org
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c
index 26d66431f95b7..3b24ce8e3b3cb 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -1195,7 +1195,7 @@ static ssize_t rxe_show_parent(struct device *device,
 	struct rxe_dev *rxe = container_of(device, struct rxe_dev,
 					   ib_dev.dev);
 
-	return snprintf(buf, 16, "%s\n", rxe_parent_name(rxe, 1));
+	return scnprintf(buf, PAGE_SIZE, "%s\n", rxe_parent_name(rxe, 1));
 }
 
 static DEVICE_ATTR(parent, S_IRUGO, rxe_show_parent, NULL);
-- 
2.25.1

[PATCH 4.9 47/70] gcov: add support for GCC 10.1

[Greg Kroah-Hartman]

From: Peter Oberparleiter <oberpar@linux.ibm.com>

[ Upstream commit 40249c6962075c040fd071339acae524f18bfac9 ]

Using gcov to collect coverage data for kernels compiled with GCC 10.1
causes random malfunctions and kernel crashes.  This is the result of a
changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between
the layout of the gcov_info structure created by GCC profiling code and
the related structure used by the kernel.

Fix this by updating the in-kernel GCOV_COUNTERS value.  Also re-enable
config GCOV_KERNEL for use with GCC 10.

Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/gcov/Kconfig   | 1 -
 kernel/gcov/gcc_4_7.c | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index 1d78ed19a3512..1276aabaab550 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -3,7 +3,6 @@ menu "GCOV-based kernel profiling"
 config GCOV_KERNEL
 	bool "Enable gcov-based kernel profiling"
 	depends on DEBUG_FS
-	depends on !CC_IS_GCC || GCC_VERSION < 100000
 	select CONSTRUCTORS if !UML
 	default n
 	---help---
diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c
index 46a18e72bce61..6d5ef6220afe7 100644
--- a/kernel/gcov/gcc_4_7.c
+++ b/kernel/gcov/gcc_4_7.c
@@ -18,7 +18,9 @@
 #include <linux/vmalloc.h>
 #include "gcov.h"
 
-#if (__GNUC__ >= 7)
+#if (__GNUC__ >= 10)
+#define GCOV_COUNTERS			8
+#elif (__GNUC__ >= 7)
 #define GCOV_COUNTERS			9
 #elif (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1)
 #define GCOV_COUNTERS			10
-- 
2.25.1

[PATCH 4.9 48/70] net: handle the return value of pskb_carve_frag_list() correctly

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

commit eabe861881a733fc84f286f4d5a1ffaddd4f526f upstream.

pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear().
we should handle this correctly or we would get wrong sk_buff.

Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skbuff.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4990,9 +4990,13 @@ static int pskb_carve_inside_nonlinear(s
 	if (skb_has_frag_list(skb))
 		skb_clone_fraglist(skb);
 
-	if (k == 0) {
-		/* split line is in frag list */
-		pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask);
+	/* split line is in frag list */
+	if (k == 0 && pskb_carve_frag_list(skb, shinfo, off - pos, gfp_mask)) {
+		/* skb_frag_unref() is not needed here as shinfo->nr_frags = 0. */
+		if (skb_has_frag_list(skb))
+			kfree_skb_list(skb_shinfo(skb)->frag_list);
+		kfree(data);
+		return -ENOMEM;
 	}
 	skb_release_data(skb);
 

[PATCH 4.9 49/70] NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

[ Upstream commit 3d7a9520f0c3e6a68b6de8c5812fc8b6d7a52626 ]

A client should be able to handle getting an ERR_DELAY error
while doing a LOCK call to reclaim state due to delegation being
recalled. This is a transient error that can happen due to server
moving its volumes and invalidating its file location cache and
upon reference to it during the LOCK call needing to do an
expensive lookup (leading to an ERR_DELAY error on a PUTFH).

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 714457bb1440a..4e2f18c26535d 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6527,7 +6527,12 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state,
 	err = nfs4_set_lock_state(state, fl);
 	if (err != 0)
 		return err;
-	err = _nfs4_do_setlk(state, F_SETLK, fl, NFS_LOCK_NEW);
+	do {
+		err = _nfs4_do_setlk(state, F_SETLK, fl, NFS_LOCK_NEW);
+		if (err != -NFS4ERR_DELAY)
+			break;
+		ssleep(1);
+	} while (err == -NFS4ERR_DELAY);
 	return nfs4_handle_delegation_recall_error(server, state, stateid, fl, err);
 }
 
-- 
2.25.1

[PATCH 4.9 50/70] scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit ea403fde7552bd61bad6ea45e3feb99db77cb31e ]

When pm8001_tag_alloc() fails, task should be freed just like it is done in
the subsequent error paths.

Link: https://lore.kernel.org/r/20200823091453.4782-1-dinghao.liu@zju.edu.cn
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index e64a13f0bce17..61a2da30f94b7 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -795,7 +795,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 
 		res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
 		if (res)
-			return res;
+			goto ex_err;
 		ccb = &pm8001_ha->ccb_info[ccb_tag];
 		ccb->device = pm8001_dev;
 		ccb->ccb_tag = ccb_tag;
-- 
2.25.1

[PATCH 4.9 51/70] scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery

[Greg Kroah-Hartman]

From: James Smart <james.smart@broadcom.com>

[ Upstream commit 7b08e89f98cee9907895fabb64cf437bc505ce9a ]

The driver is unable to successfully login with remote device. During pt2pt
login, the driver completes its FLOGI request with the remote device having
WWN precedence.  The remote device issues its own (delayed) FLOGI after
accepting the driver's and, upon transmitting the FLOGI, immediately
recognizes it has already processed the driver's FLOGI thus it transitions
to sending a PLOGI before waiting for an ACC to its FLOGI.

In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI
being received and an ACC sent. The issue is that the PLOGI reception
occurs before the response from the adapter from the FLOGI ACC is
received. Processing of the PLOGI sets state flags to perform the REG_RPI
mailbox command and proceed with the rest of discovery on the port. The
same completion routine used by both FLOGI and PLOGI is generic in
nature. One of the things it does is clear flags, and those flags happen to
drive the rest of discovery.  So what happened was the PLOGI processing set
the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC
completes it doesn't see the flags and stops.

Fix by modifying the generic completion routine to not clear the rest of
discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated
with performing a mailbox command as part of its handling.  For things such
as FLOGI ACC, there isn't a subsequent action to perform with the adapter,
thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI
upon completion, thus there is a mailbox cmd ptr.

Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 09dbf3021bb0b..7d4a5bb916062 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3865,7 +3865,9 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 out:
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) && shost) {
 		spin_lock_irq(shost->host_lock);
-		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
+		if (mbox)
+			ndlp->nlp_flag &= ~NLP_ACC_REGLOGIN;
+		ndlp->nlp_flag &= ~NLP_RM_DFLT_RPI;
 		spin_unlock_irq(shost->host_lock);
 
 		/* If the node is not being used by another discovery thread,
-- 
2.25.1

[PATCH 4.9 52/70] spi: spi-loopback-test: Fix out-of-bounds read

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 837ba18dfcd4db21ad58107c65bfe89753aa56d7 ]

The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when
len=131071 and rx_offset >= 5:

 spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE
 ...
   with iteration values: len = 131071, tx_off = 0, rx_off = 3
   with iteration values: len = 131071, tx_off = 0, rx_off = 4
   with iteration values: len = 131071, tx_off = 0, rx_off = 5
 loopback strangeness - rx changed outside of allowed range at: ...a4321000
   spi_msg@ffffffd5a4157690
     frame_length:  131071
     actual_length: 131071
     spi_transfer@ffffffd5a41576f8
       len:    131071
       tx_buf: ffffffd5a4340ffc

Note that rx_offset > 3 can only occur if the SPI controller driver sets
->dma_alignment to a higher value than 4, so most SPI controller drivers
are not affect.

The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132
KiB (assuming 4 KiB pages).  This test uses an initial offset into the
rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to
be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB,
which is also the end of the allocated buffer.  But the code which
verifies the content of the buffer reads a byte beyond the allocated
buffer and spuriously fails because this out-of-bounds read doesn't
return the expected value.

Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid
testing sizes which cause out-of-bounds reads.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-loopback-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 50e620f4e8fe2..7120083fe7610 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -74,7 +74,7 @@ static struct spi_test spi_tests[] = {
 	{
 		.description	= "tx/rx-transfer - crossing PAGE_SIZE",
 		.fill_option	= FILL_COUNT_8,
-		.iterate_len    = { ITERATE_MAX_LEN },
+		.iterate_len    = { ITERATE_LEN },
 		.iterate_tx_align = ITERATE_ALIGN,
 		.iterate_rx_align = ITERATE_ALIGN,
 		.transfers		= {
-- 
2.25.1

[PATCH 4.9 53/70] SUNRPC: stop printk reading past end of string

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 8c6b6c793ed32b8f9770ebcdf1ba99af423c303b ]

Since p points at raw xdr data, there's no guarantee that it's NULL
terminated, so we should give a length.  And probably escape any special
characters too.

Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/rpcb_clnt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index eafc78e063f1d..185441d7a2814 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -975,8 +975,8 @@ static int rpcb_dec_getaddr(struct rpc_rqst *req, struct xdr_stream *xdr,
 	p = xdr_inline_decode(xdr, len);
 	if (unlikely(p == NULL))
 		goto out_fail;
-	dprintk("RPC: %5u RPCB_%s reply: %s\n", req->rq_task->tk_pid,
-			req->rq_task->tk_msg.rpc_proc->p_name, (char *)p);
+	dprintk("RPC: %5u RPCB_%s reply: %*pE\n", req->rq_task->tk_pid,
+			req->rq_task->tk_msg.rpc_proc->p_name, len, (char *)p);
 
 	if (rpc_uaddr2sockaddr(req->rq_xprt->xprt_net, (char *)p, len,
 				sap, sizeof(address)) == 0)
-- 
2.25.1

[PATCH 4.9 54/70] rapidio: Replace select DMAENGINES with depends on

[Greg Kroah-Hartman]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit d2b86100245080cfdf1e95e9e07477474c1be2bd ]

Enabling a whole subsystem from a single driver 'select' is frowned
upon and won't be accepted in new drivers, that need to use 'depends on'
instead. Existing selection of DMAENGINES will then cause circular
dependencies. Replace them with a dependency.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rapidio/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index d6d2f20c45977..21df2816def76 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -25,7 +25,7 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
 config RAPIDIO_DMA_ENGINE
 	bool "DMA Engine support for RapidIO"
 	depends on RAPIDIO
-	select DMADEVICES
+	depends on DMADEVICES
 	select DMA_ENGINE
 	help
 	  Say Y here if you want to use DMA Engine frameork for RapidIO data
-- 
2.25.1

[PATCH 4.9 55/70] i2c: algo: pca: Reapply i2c bus settings after reset

[Greg Kroah-Hartman]

From: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>

[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ]

If something goes wrong (such as the SCL being stuck low) then we need
to reset the PCA chip. The issue with this is that on reset we lose all
config settings and the chip ends up in a disabled state which results
in a lock up/high CPU usage. We need to re-apply any configuration that
had previously been set and re-enable the chip.

Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/algos/i2c-algo-pca.c | 35 +++++++++++++++++++++-----------
 include/linux/i2c-algo-pca.h     | 15 ++++++++++++++
 2 files changed, 38 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 3a9db4626cb60..1886588b9ea3e 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
 		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
 		pca_outw(adap, I2C_PCA_IND, 0xA5);
 		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
 	} else {
 		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
 	}
 }
 
@@ -435,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap)
 				" Use the nominal frequency.\n", adap->name);
 		}
 
-		pca_reset(pca_data);
-
 		clock = pca_clock(pca_data);
 		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
 		     adap->name, freqs[clock]);
 
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
 	} else {
 		int clock;
 		int mode;
@@ -508,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap)
 			thi = tlow * min_thi / min_tlow;
 		}
 
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
 		pca_reset(pca_data);
 
 		printk(KERN_INFO
 		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
-		pca_outw(pca_data, I2C_PCA_IND, mode);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
-		pca_outw(pca_data, I2C_PCA_IND, tlow);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
-		pca_outw(pca_data, I2C_PCA_IND, thi);
-
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
 	}
 	udelay(500); /* 500 us for oscillator to stabilise */
 
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
index a3c3ecd59f08c..7a43afd273655 100644
--- a/include/linux/i2c-algo-pca.h
+++ b/include/linux/i2c-algo-pca.h
@@ -52,6 +52,20 @@
 #define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
 #define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
 
+/**
+ * struct pca_i2c_bus_settings - The configured PCA i2c bus settings
+ * @mode: Configured i2c bus mode
+ * @tlow: Configured SCL LOW period
+ * @thi: Configured SCL HIGH period
+ * @clock_freq: The configured clock frequency
+ */
+struct pca_i2c_bus_settings {
+	int mode;
+	int tlow;
+	int thi;
+	int clock_freq;
+};
+
 struct i2c_algo_pca_data {
 	void 				*data;	/* private low level data */
 	void (*write_byte)		(void *data, int reg, int val);
@@ -63,6 +77,7 @@ struct i2c_algo_pca_data {
 	 * For PCA9665, use the frequency you want here. */
 	unsigned int			i2c_clock;
 	unsigned int			chip;
+	struct pca_i2c_bus_settings		bus_settings;
 };
 
 int i2c_pca_add_bus(struct i2c_adapter *);
-- 
2.25.1

[PATCH 4.9 56/70] clk: rockchip: Fix initialization of mux_pll_src_4plls_p

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit e9c006bc782c488f485ffe50de20b44e1e3daa18 ]

A new warning in Clang points out that the initialization of
mux_pll_src_4plls_p appears incorrect:

../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious
concatenation of string literals in an array initialization; did you
mean to separate the elements with a comma? [-Wstring-concatenation]
PNAME(mux_pll_src_4plls_p)      = { "cpll", "gpll", "hdmiphy" "usb480m" };
                                                              ^
                                                             ,
../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses
around the string literal to silence warning
PNAME(mux_pll_src_4plls_p)      = { "cpll", "gpll", "hdmiphy" "usb480m" };
                                                    ^
1 warning generated.

Given the name of the variable and the same variable name in rv1108, it
seems that this should have been four distinct elements. Fix it up by
adding the comma as suggested.

Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Link: https://github.com/ClangBuiltLinux/linux/issues/1123
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.com
Reviewed-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3228.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3228.c b/drivers/clk/rockchip/clk-rk3228.c
index 53f16efbb8f4f..31785b3abac50 100644
--- a/drivers/clk/rockchip/clk-rk3228.c
+++ b/drivers/clk/rockchip/clk-rk3228.c
@@ -126,7 +126,7 @@ PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
 PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "xin24m" };
 PNAME(mux_aclk_cpu_src_p)	= { "cpll_aclk_cpu", "gpll_aclk_cpu", "hdmiphy_aclk_cpu" };
 
-PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy" "usb480m" };
+PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy", "usb480m" };
 PNAME(mux_pll_src_3plls_p)	= { "cpll", "gpll", "hdmiphy" };
 PNAME(mux_pll_src_2plls_p)	= { "cpll", "gpll" };
 PNAME(mux_sclk_hdmi_cec_p)	= { "cpll", "gpll", "xin24m" };
-- 
2.25.1

[PATCH 4.9 57/70] Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload

[Greg Kroah-Hartman]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit 911e1987efc8f3e6445955fbae7f54b428b92bd3 ]

vmbus_wait_for_unload() looks for a CHANNELMSG_UNLOAD_RESPONSE message
coming from Hyper-V.  But if the message isn't found for some reason,
the panic path gets hung forever.  Add a timeout of 10 seconds to prevent
this.

Fixes: 415719160de3 ("Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1600026449-23651-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/channel_mgmt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 9360cdce740e8..7bf5e2fe17516 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -681,7 +681,7 @@ static void vmbus_wait_for_unload(void)
 	void *page_addr;
 	struct hv_message *msg;
 	struct vmbus_channel_message_header *hdr;
-	u32 message_type;
+	u32 message_type, i;
 
 	/*
 	 * CHANNELMSG_UNLOAD_RESPONSE is always delivered to the CPU which was
@@ -691,8 +691,11 @@ static void vmbus_wait_for_unload(void)
 	 * functional and vmbus_unload_response() will complete
 	 * vmbus_connection.unload_event. If not, the last thing we can do is
 	 * read message pages for all CPUs directly.
+	 *
+	 * Wait no more than 10 seconds so that the panic path can't get
+	 * hung forever in case the response message isn't seen.
 	 */
-	while (1) {
+	for (i = 0; i < 1000; i++) {
 		if (completion_done(&vmbus_connection.unload_event))
 			break;
 
-- 
2.25.1

[PATCH 4.9 58/70] MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

[ Upstream commit 564c836fd945a94b5dd46597d6b7adb464092650 ]

Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot
to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non
coherent DMA because of a wrong allocation alignment.

Fixes: 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f8a529c852795..24eb7fe7922e6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -848,6 +848,7 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
+	select MIPS_L1_CACHE_SHIFT_6
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
-- 
2.25.1

[PATCH 4.9 59/70] perf test: Free formats for perf pmu parse test

[Greg Kroah-Hartman]

From: Namhyung Kim <namhyung@kernel.org>

[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ]

The following leaks were detected by ASAN:

  Indirect leak of 360 byte(s) in 9 object(s) allocated from:
    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    #6 0x560578de109b in test_and_print tests/builtin-test.c:440
    #7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    #8 0x560578de401a in cmd_test tests/builtin-test.c:807
    #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/pmu.c |  1 +
 tools/perf/util/pmu.c  | 11 +++++++++++
 tools/perf/util/pmu.h  |  1 +
 3 files changed, 13 insertions(+)

diff --git a/tools/perf/tests/pmu.c b/tools/perf/tests/pmu.c
index 1802ad3f45b63..e2fab5229ec08 100644
--- a/tools/perf/tests/pmu.c
+++ b/tools/perf/tests/pmu.c
@@ -169,6 +169,7 @@ int test__pmu(int subtest __maybe_unused)
 		ret = 0;
 	} while (0);
 
+	perf_pmu__del_formats(&formats);
 	test_format_dir_put(format);
 	return ret;
 }
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index 39abbf8276464..5f1ba6f84f5f7 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -1018,6 +1018,17 @@ void perf_pmu__set_format(unsigned long *bits, long from, long to)
 		set_bit(b, bits);
 }
 
+void perf_pmu__del_formats(struct list_head *formats)
+{
+	struct perf_pmu_format *fmt, *tmp;
+
+	list_for_each_entry_safe(fmt, tmp, formats, list) {
+		list_del(&fmt->list);
+		free(fmt->name);
+		free(fmt);
+	}
+}
+
 static int sub_non_neg(int a, int b)
 {
 	if (b > a)
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 25712034c815b..fed6c3b56ce75 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -71,6 +71,7 @@ int perf_pmu__new_format(struct list_head *list, char *name,
 			 int config, unsigned long *bits);
 void perf_pmu__set_format(unsigned long *bits, long from, long to);
 int perf_pmu__format_parse(char *dir, struct list_head *head);
+void perf_pmu__del_formats(struct list_head *formats);
 
 struct perf_pmu *perf_pmu__scan(struct perf_pmu *pmu);
 
-- 
2.25.1

[PATCH 4.9 60/70] fbcon: Fix user font detection test at fbcon_resize().

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit ec0972adecb391a8d8650832263a4790f3bfb4df ]

syzbot is reporting OOB read at fbcon_resize() [1], for
commit 39b3cffb8cf31117 ("fbcon: prevent user font height or width change
 from causing potential out-of-bounds access") is by error using
registered_fb[con2fb_map[vc->vc_num]]->fbcon_par->p->userfont (which was
set to non-zero) instead of fb_display[vc->vc_num].userfont (which remains
zero for that display).

We could remove tricky userfont flag [2], for we can determine it by
comparing address of the font data and addresses of built-in font data.
But since that commit is failing to fix the original OOB read [3], this
patch keeps the change minimal in case we decide to revert altogether.

[1] https://syzkaller.appspot.com/bug?id=ebcbbb6576958a496500fee9cf7aa83ea00b5920
[2] https://syzkaller.appspot.com/text?tag=Patch&x=14030853900000
[3] https://syzkaller.appspot.com/bug?id=6fba8c186d97cf1011ab17660e633b1cc4e080c9

Reported-by: syzbot <syzbot+b38b1ef6edf0c74a8d97@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 39b3cffb8cf31117 ("fbcon: prevent user font height or width change from causing potential out-of-bounds access")
Cc: George Kennedy <george.kennedy@oracle.com>
Link: https://lore.kernel.org/r/f6e3e611-8704-1263-d163-f52c906a4f06@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/console/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index fedf50e091bab..4b7d0f9a820aa 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1943,7 +1943,7 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width,
 	struct fb_var_screeninfo var = info->var;
 	int x_diff, y_diff, virt_w, virt_h, virt_fw, virt_fh;
 
-	if (ops->p && ops->p->userfont && FNTSIZE(vc->vc_font.data)) {
+	if (p->userfont && FNTSIZE(vc->vc_font.data)) {
 		int size;
 		int pitch = PITCH(vc->vc_font.width);
 
-- 
2.25.1

[PATCH 4.9 61/70] MIPS: SNI: Fix spurious interrupts

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

[ Upstream commit b959b97860d0fee8c8f6a3e641d3c2ad76eab6be ]

On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.

Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/sni/a20r.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index f9407e1704762..c6af7047eb0d2 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -143,7 +143,10 @@ static struct platform_device sc26xx_pdev = {
 	},
 };
 
-static u32 a20r_ack_hwint(void)
+/*
+ * Trigger chipset to update CPU's CAUSE IP field
+ */
+static u32 a20r_update_cause_ip(void)
 {
 	u32 status = read_c0_status();
 
@@ -205,12 +208,14 @@ static void a20r_hwint(void)
 	int irq;
 
 	clear_c0_status(IE_IRQ0);
-	status = a20r_ack_hwint();
+	status = a20r_update_cause_ip();
 	cause = read_c0_cause();
 
 	irq = ffs(((cause & status) >> 8) & 0xf8);
 	if (likely(irq > 0))
 		do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
+
+	a20r_update_cause_ip();
 	set_c0_status(IE_IRQ0);
 }
 
-- 
2.25.1

[PATCH 4.9 62/70] drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

[ Upstream commit 64c194c00789889b0f9454f583712f079ba414ee ]

mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it
fail, previous successive init component is not proccessed.

Thus uninitialize valid component and put their device if component
init failed.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 2865876079315..0f8f9a784b1be 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -457,8 +457,13 @@ err_pm:
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
 		of_node_put(private->comp_node[i]);
+		if (private->ddp_comp[i]) {
+			put_device(private->ddp_comp[i]->larb_dev);
+			private->ddp_comp[i] = NULL;
+		}
+	}
 	return ret;
 }
 
-- 
2.25.1

[PATCH 4.9 63/70] USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook

[Greg Kroah-Hartman]

From: Penghao <penghao@uniontech.com>

commit bcea6dafeeef7d1a6a8320a249aabf981d63b881 upstream.

Add a USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for the BYD zhaoxin notebook.
This notebook come with usb touchpad. And we would like to disable
touchpad wakeup on this notebook by default.

Signed-off-by: Penghao <penghao@uniontech.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200907023026.28189-1-penghao@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -236,6 +236,10 @@ static const struct usb_device_id usb_qu
 	/* Generic RTL8153 based ethernet adapters */
 	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* SONiX USB DEVICE Touchpad */
+	{ USB_DEVICE(0x0c45, 0x7056), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

[PATCH 4.9 64/70] USB: UAS: fix disconnect by unplugging a hub

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 325b008723b2dd31de020e85ab9d2e9aa4637d35 upstream.

The SCSI layer can go into an ugly loop if you ignore that a device is
gone. You need to report an error in the command rather than in the
return value of the queue method.

We need to specifically check for ENODEV. The issue goes back to the
introduction of the driver.

Fixes: 115bb1ffa54c3 ("USB: Add UAS driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200916094026.30085-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/uas.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -670,8 +670,7 @@ static int uas_queuecommand_lck(struct s
 	if (devinfo->resetting) {
 		cmnd->result = DID_ERROR << 16;
 		cmnd->scsi_done(cmnd);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return 0;
+		goto zombie;
 	}
 
 	/* Find a free uas-tag */
@@ -706,6 +705,16 @@ static int uas_queuecommand_lck(struct s
 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
 
 	err = uas_submit_urbs(cmnd, devinfo);
+	/*
+	 * in case of fatal errors the SCSI layer is peculiar
+	 * a command that has finished is a success for the purpose
+	 * of queueing, no matter how fatal the error
+	 */
+	if (err == -ENODEV) {
+		cmnd->result = DID_ERROR << 16;
+		cmnd->scsi_done(cmnd);
+		goto zombie;
+	}
 	if (err) {
 		/* If we did nothing, give up now */
 		if (cmdinfo->state & SUBMIT_STATUS_URB) {
@@ -716,6 +725,7 @@ static int uas_queuecommand_lck(struct s
 	}
 
 	devinfo->cmnd[idx] = cmnd;
+zombie:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }

[PATCH 4.9 65/70] usblp: fix race between disconnect() and read()

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 9cdabcb3ef8c24ca3a456e4db7b012befb688e73 upstream.

read() needs to check whether the device has been
disconnected before it tries to talk to the device.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/usblp.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -840,6 +840,11 @@ static ssize_t usblp_read(struct file *f
 	if (rv < 0)
 		return rv;
 
+	if (!usblp->present) {
+		count = -ENODEV;
+		goto done;
+	}
+
 	if ((avail = usblp->rstatus) < 0) {
 		printk(KERN_ERR "usblp%d: error %d reading from printer\n",
 		    usblp->minor, (int)avail);

[PATCH 4.9 66/70] Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit c4440b8a457779adeec42c5e181cb4016f19ce0f upstream.

The keyboard drops keypresses early during boot unless both the nomux
and reset quirks are set. Add DMI table entries for this.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -552,6 +552,14 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"),
 		},
 	},
+	{
+		/* Entroware Proteus */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Entroware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"),
+		},
+	},
 	{ }
 };
 
@@ -752,6 +760,14 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"),
 		},
 	},
+	{
+		/* Entroware Proteus */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Entroware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"),
+		},
+	},
 	{ }
 };
 

[PATCH 4.9 67/70] serial: 8250_pci: Add Realtek 816a and 816b

[Greg Kroah-Hartman]

From: Tobias Diedrich <tobiasdiedrich@gmail.com>

commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream.

These serial ports are exposed by the OOB-management-engine on
RealManage-enabled network cards (e.g. AMD DASH enabled systems using
Realtek cards).

Because these have 3 BARs, they fail the "num_iomem <= 1" check in
serial_pci_guess_board.

I've manually checked the two IOMEM regions and BAR 2 doesn't seem to
respond to reads, but BAR 4 seems to be an MMIO version of the IO ports
(untested).

With this change, the ports are detected:
0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A
0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A

lspci output:
02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550])
        Subsystem: 17aa:5082
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 82
        IOMMU group: 11
        Region 0: I/O ports at 2200 [size=256]
        Region 2: Memory at fd715000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at fd704000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v2) Endpoint, MSI 01
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
                         10BitTagComp- 10BitTagReq- OBFF Via message/WAKE#, ExtFmt- EETLPPrefix-
                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
                Vector table: BAR=4 offset=00000000
                PBA: BAR=4 offset=00000800
        Capabilities: [d0] Vital Product Data
                Not readable
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
        Capabilities: [170 v1] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Capabilities: [178 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                          PortCommonModeRestoreTime=150us PortTPowerOnTime=150us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=0us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
02:00.2 0700: 10ec:816b (rev 0e)
[...same...]

Signed-off-by: Tobias Diedrich <tobiasdiedrich@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -5709,6 +5709,17 @@ static struct pci_device_id serial_pci_t
 		0,
 		0, pbn_exar_XR17V358 },
 
+	/*
+	 * Realtek RealManage
+	 */
+	{	PCI_VENDOR_ID_REALTEK, 0x816a,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_REALTEK, 0x816b,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
 	/* Fintek PCI serial cards */
 	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },

[PATCH 4.9 68/70] ehci-hcd: Move include to keep CRC stable

[Greg Kroah-Hartman]

From: Quentin Perret <qperret@google.com>

commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream.

The CRC calculation done by genksyms is triggered when the parser hits
EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the
types of the function parameters, and uses that as the input for the CRC
calculation. In the case of forward-declared structs, the type expands
to 'UNKNOWN'. Following this, it appears that the result of the
expansion of each type is cached somewhere, and seems to be re-used
when/if the same type is seen again for another exported symbol in the
same C file.

Unfortunately, this can cause CRC 'stability' issues when a struct
definition becomes visible in the middle of a C file. For example, let's
assume code with the following pattern:

    struct foo;

    int bar(struct foo *arg)
    {
	/* Do work ... */
    }
    EXPORT_SYMBOL_GPL(bar);

    /* This contains struct foo's definition */
    #include "foo.h"

    int baz(struct foo *arg)
    {
	/* Do more work ... */
    }
    EXPORT_SYMBOL_GPL(baz);

Here, baz's CRC will be computed using the expansion of struct foo that
was cached after bar's CRC calculation ('UNKOWN' here). But if
EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol
trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded
late, during baz's CRC calculation, which now has visibility over the
full struct definition, hence resulting in a different CRC for baz.

The proper fix for this certainly is in genksyms, but that will take me
some time to get right. In the meantime, we have seen one occurrence of
this in the ehci-hcd code which hits this problem because of the way it
includes C files halfway through the code together with an unlucky mix
of symbol trimming.

In order to workaround this, move the include done in ehci-hub.c early
in ehci-hcd.c, hence making sure the struct definitions are visible to
the entire file. This improves CRC stability of the ehci-hcd exports
even when symbol trimming is enabled.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/ehci-hcd.c |    1 +
 drivers/usb/host/ehci-hub.c |    1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -35,6 +35,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -27,7 +27,6 @@
  */
 
 /*-------------------------------------------------------------------------*/
-#include <linux/usb/otg.h>
 
 #define	PORT_WAKE_BITS	(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
 

[PATCH 4.9 69/70] powerpc/dma: Fix dma_map_ops::get_required_mask

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

commit 437ef802e0adc9f162a95213a3488e8646e5fc03 upstream.

There are 2 problems with it:
  1. "<" vs expected "<<"
  2. the shift number is an IOMMU page number mask, not an address
  mask as the IOMMU page shift is missing.

This did not hit us before f1565c24b596 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".

After f1565c24b596, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.

This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".

Fixes: 6a5c7be5e484 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/dma-iommu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -99,7 +99,8 @@ static u64 dma_iommu_get_required_mask(s
 	if (!tbl)
 		return 0;
 
-	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+	mask = 1ULL << (fls_long(tbl->it_offset + tbl->it_size) +
+			tbl->it_page_shift - 1);
 	mask += mask - 1;
 
 	return mask;

[PATCH 4.9 70/70] x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y

[Greg Kroah-Hartman]

From: Adam Borowski <kilobyte@angband.pl>

commit 72a9c673636b779e370983fea08e40f97039b981 upstream.

A spanking new machine I just got has all but one USB ports wired as 3.0.
Booting defconfig resulted in no keyboard or mouse, which was pretty
uncool.  Let's enable that -- USB3 is ubiquitous rather than an oddity.
As 'y' not 'm' -- recovering from initrd problems needs a keyboard.

Also add it to the 32-bit defconfig.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.pl
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/configs/i386_defconfig   |    1 +
 arch/x86/configs/x86_64_defconfig |    1 +
 2 files changed, 2 insertions(+)

--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -246,6 +246,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -241,6 +241,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y

Re: [PATCH 4.9 00/70] 4.9.237-rc1 review

[Naresh Kamboju]

On Mon, 21 Sep 2020 at 22:05, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.237 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Sep 2020 16:20:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.237-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.9.237-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: b7aa672795fd423afa4bd326c3abd59c991263ea
git describe: v4.9.236-71-gb7aa672795fd
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.236-71-gb7aa672795fd


No regressions (compared to build v4.9.236-47-g9769e65dc140)

No Fixes (compared to build v4.9.236-47-g9769e65dc140)

Ran 14478 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-syscalls-tests
* kselftest/net

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.9 00/70] 4.9.237-rc1 review

[Guenter Roeck]

On Mon, Sep 21, 2020 at 06:27:00PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.237 release.
> There are 70 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Sep 2020 16:20:12 +0000.
> Anything received after that time might be too late.
> 

Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 386 pass: 386 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter