linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <p.yadav@ti.com>, <vigneshr@ti.com>, <boris.brezillon@collabora.com>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>
Subject: [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE
Date: Tue, 29 Sep 2020 12:59:49 +0300	[thread overview]
Message-ID: <20200929095951.1575658-2-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20200929095951.1575658-1-tudor.ambarus@microchip.com>

We don't want to enter a stateful mode, where a X-X-X I/O mode
is entered by setting a non-volatile bit, because in case of a
reset or a crash, once in the non-volatile mode, we may not be able
to recover in bootloaders and we may break the SPI NOR boot.

Forbid by default the I/O modes that are set via a non-volatile bit.

SPI_NOR_IO_MODE_EN_VOLATILE should be set just for the flashes that
don't define the optional SFDP SCCR Map, so that we don't pollute the
flash info flags.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 6 ++++++
 drivers/mtd/spi-nor/core.h | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 34edfcf33172..c149b318e2e8 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3089,6 +3089,9 @@ static int spi_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
 	      nor->write_proto == SNOR_PROTO_8_8_8_DTR))
 		return 0;
 
+	if (!(nor->flags & SNOR_F_IO_MODE_EN_VOLATILE))
+		return 0;
+
 	ret = nor->params->octal_dtr_enable(nor, enable);
 	if (ret)
 		return ret;
@@ -3474,6 +3477,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (info->flags & SPI_NOR_4B_OPCODES)
 		nor->flags |= SNOR_F_4B_OPCODES;
 
+	if (info->flags & SPI_NOR_IO_MODE_EN_VOLATILE)
+		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
 	ret = spi_nor_set_addr_width(nor);
 	if (ret)
 		return ret;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 10dc03506f93..c2755c82f978 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -27,6 +27,7 @@ enum spi_nor_option_flags {
 	SNOR_F_HAS_4BIT_BP      = BIT(12),
 	SNOR_F_HAS_SR_BP3_BIT6  = BIT(13),
 	SNOR_F_SOFT_RESET	= BIT(14),
+	SNOR_F_IO_MODE_EN_VOLATILE = BIT(15),
 };
 
 struct spi_nor_read_command {
@@ -323,6 +324,11 @@ struct flash_info {
 					 */
 #define SPI_NOR_OCTAL_DTR_READ	BIT(19) /* Flash supports octal DTR Read. */
 #define SPI_NOR_OCTAL_DTR_PP	BIT(20) /* Flash supports Octal DTR Page Program */
+#define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(21) /*
+						 * Flash enables the best
+						 * available I/O mode via a
+						 * volatile bit.
+						 */
 
 	/* Part specific fixup hooks. */
 	const struct spi_nor_fixups *fixups;
-- 
2.25.1


  reply	other threads:[~2020-09-29 10:00 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-16 12:44 [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-09-16 12:44 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:30   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read,write}_reg() helpers Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:38   ` Tudor.Ambarus
2020-09-29 12:54     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 03/15] mtd: spi-nor: core: add spi_nor_controller_ops_erase helper Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 04/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 05/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:17   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 06/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:44   ` Tudor.Ambarus
2020-09-30  6:53     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 07/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:46   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 08/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:50   ` Tudor.Ambarus
2020-09-30  6:55     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 09/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:26   ` Tudor.Ambarus
2020-09-29 12:51     ` Pratyush Yadav
2020-09-29 13:05       ` Tudor.Ambarus
2020-09-30  7:11   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 10/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:23   ` Tudor.Ambarus
2020-09-30  7:31     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 11/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 13:08   ` Pratyush Yadav
2020-09-30  7:32     ` Tudor.Ambarus
2020-09-30  7:43       ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 12/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:40   ` Tudor.Ambarus
2020-09-30  7:44     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 13/15] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:51   ` Tudor.Ambarus
2020-09-30  8:03     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  8:36   ` Tudor.Ambarus
2020-09-30 12:32     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  9:12   ` Tudor.Ambarus
2020-09-29  9:59 ` [RFC PATCH 0/3] mtd: spi-nor: Tackle stateful modes Tudor Ambarus
2020-09-29  9:59   ` Tudor Ambarus [this message]
2020-09-29 16:45     ` [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Vignesh Raghavendra
2020-09-29  9:59   ` [RFC PATCH 2/3] mtd: spi-nor: Introduce MTD_SPI_NOR_ALLOW_STATEFUL_MODES Tudor Ambarus
2020-09-29 16:45     ` Vignesh Raghavendra
2020-09-29  9:59   ` [RFC PATCH 3/3] mtd: spi-nor: Parse SFDP SCCR Map Tudor Ambarus
2020-09-30  9:57 ` [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Tudor.Ambarus
2020-09-30 12:01   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200929095951.1575658-2-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=p.yadav@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).