linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <p.yadav@ti.com>, <miquel.raynal@bootlin.com>, <richard@nod.at>,
	<vigneshr@ti.com>, <linux-mtd@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <nsekhar@ti.com>, <boris.brezillon@collabora.com>
Subject: Re: [PATCH v13 05/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT
Date: Wed, 30 Sep 2020 06:17:01 +0000	[thread overview]
Message-ID: <db90b212-cbf9-a675-024d-11a4969b9a6b@microchip.com> (raw)
In-Reply-To: <20200916124418.833-6-p.yadav@ti.com>

On 9/16/20 3:44 PM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Some devices in DTR mode expect an extra command byte called the
> extension. The extension can either be same as the opcode, bitwise
> inverse of the opcode, or another additional byte forming a 16-byte
> opcode. Get the extension type from the BFPT. For now, only flashes with
> "repeat" and "inverse" extensions are supported.
> 
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> ---
>  drivers/mtd/spi-nor/sfdp.c | 18 ++++++++++++++++++
>  drivers/mtd/spi-nor/sfdp.h |  6 ++++++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
> index 21fa9ab78eae..c77655968f80 100644
> --- a/drivers/mtd/spi-nor/sfdp.c
> +++ b/drivers/mtd/spi-nor/sfdp.c
> @@ -606,6 +606,24 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
>         if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
>                 return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
>                                                 params);
> +       /* 8D-8D-8D command extension. */
> +       switch (bfpt.dwords[BFPT_DWORD(18)] & BFPT_DWORD18_CMD_EXT_MASK) {
> +       case BFPT_DWORD18_CMD_EXT_REP:
> +               nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
> +               break;
> +
> +       case BFPT_DWORD18_CMD_EXT_INV:
> +               nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
> +               break;
> +
> +       case BFPT_DWORD18_CMD_EXT_RES:
> +               dev_dbg(nor->dev, "Reserved command extension used\n");
> +               break;
> +
> +       case BFPT_DWORD18_CMD_EXT_16B:
> +               dev_dbg(nor->dev, "16-bit opcodes not supported\n");
> +               return -EOPNOTSUPP;
> +       }
> 
>         return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
>  }
> diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
> index 7f9846b3a1ad..6d7243067252 100644
> --- a/drivers/mtd/spi-nor/sfdp.h
> +++ b/drivers/mtd/spi-nor/sfdp.h
> @@ -90,6 +90,12 @@ struct sfdp_bfpt {
>  #define BFPT_DWORD15_QER_SR2_BIT1_NO_RD                (0x4UL << 20)
>  #define BFPT_DWORD15_QER_SR2_BIT1              (0x5UL << 20) /* Spansion */
> 
> +#define BFPT_DWORD18_CMD_EXT_MASK              GENMASK(30, 29)
> +#define BFPT_DWORD18_CMD_EXT_REP               (0x0UL << 29) /* Repeat */
> +#define BFPT_DWORD18_CMD_EXT_INV               (0x1UL << 29) /* Invert */
> +#define BFPT_DWORD18_CMD_EXT_RES               (0x2UL << 29) /* Reserved */
> +#define BFPT_DWORD18_CMD_EXT_16B               (0x3UL << 29) /* 16-bit opcode */
> +
>  struct sfdp_parameter_header {
>         u8              id_lsb;
>         u8              minor;
> --
> 2.28.0
> 


  parent reply	other threads:[~2020-09-30  6:17 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-16 12:44 [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-09-16 12:44 ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:30   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 02/15] mtd: spi-nor: core: add spi_nor_{read,write}_reg() helpers Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:38   ` Tudor.Ambarus
2020-09-29 12:54     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 03/15] mtd: spi-nor: core: add spi_nor_controller_ops_erase helper Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 04/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 05/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:17   ` Tudor.Ambarus [this message]
2020-09-16 12:44 ` [PATCH v13 06/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:44   ` Tudor.Ambarus
2020-09-30  6:53     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 07/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:46   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 08/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  6:50   ` Tudor.Ambarus
2020-09-30  6:55     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 09/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 11:26   ` Tudor.Ambarus
2020-09-29 12:51     ` Pratyush Yadav
2020-09-29 13:05       ` Tudor.Ambarus
2020-09-30  7:11   ` Tudor.Ambarus
2020-09-16 12:44 ` [PATCH v13 10/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:23   ` Tudor.Ambarus
2020-09-30  7:31     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 11/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-29 13:08   ` Pratyush Yadav
2020-09-30  7:32     ` Tudor.Ambarus
2020-09-30  7:43       ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 12/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:40   ` Tudor.Ambarus
2020-09-30  7:44     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 13/15] mtd: spi-nor: core: expose spi_nor_default_setup() in core.h Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  7:51   ` Tudor.Ambarus
2020-09-30  8:03     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  8:36   ` Tudor.Ambarus
2020-09-30 12:32     ` Pratyush Yadav
2020-09-16 12:44 ` [PATCH v13 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-09-16 12:44   ` Pratyush Yadav
2020-09-30  9:12   ` Tudor.Ambarus
2020-09-29  9:59 ` [RFC PATCH 0/3] mtd: spi-nor: Tackle stateful modes Tudor Ambarus
2020-09-29  9:59   ` [RFC PATCH 1/3] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Tudor Ambarus
2020-09-29 16:45     ` Vignesh Raghavendra
2020-09-29  9:59   ` [RFC PATCH 2/3] mtd: spi-nor: Introduce MTD_SPI_NOR_ALLOW_STATEFUL_MODES Tudor Ambarus
2020-09-29 16:45     ` Vignesh Raghavendra
2020-09-29  9:59   ` [RFC PATCH 3/3] mtd: spi-nor: Parse SFDP SCCR Map Tudor Ambarus
2020-09-30  9:57 ` [PATCH v13 00/15] mtd: spi-nor: add xSPI Octal DTR support Tudor.Ambarus
2020-09-30 12:01   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=db90b212-cbf9-a675-024d-11a4969b9a6b@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=nsekhar@ti.com \
    --cc=p.yadav@ti.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).