From: email@example.com To: firstname.lastname@example.org Cc: email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org, email@example.com, firstname.lastname@example.org Subject: [PATCH v4 0/2] Add SDM630/636/660 interconnect driver Date: Sat, 17 Oct 2020 15:37:16 +0200 [thread overview] Message-ID: <email@example.com> (raw) From: AngeloGioacchino Del Regno <firstname.lastname@example.org> This patch series adds the SDM660 interconnect provider driver in order to stop some timeouts and achieve some decent performance by avoiding to be NoC limited. It's also providing some power consumption improvement, but I have only measured that as less heat, which is quite important when working on thermally constrained devices like smartphones. Please note that this driver's yaml binding is referring to a MMCC clock, so this series does depend on the SDM660 MMCC driver that I have sent separately. The multimedia clock is required only for the Multimedia NoC (mnoc). This patch series has been tested against the following devices: - Sony Xperia XA2 Ultra (SDM630 Nile Discovery) - Sony Xperia 10 (SDM630 Ganges Kirin) - Sony Xperia 10 Plus (SDM636 Ganges Mermaid) Changes in v2: - Added missing qcom,mmcc-sdm660.h dt-binding include in the interconnect/qcom,sdm660.yaml binding, as pointed out by Rob Herring Changes in v3: - Moved the dt-bindings/interconnect/qcom,sdm660.h header to dt-bindings commit. Changes in v4: - Fixed code style issues and removed unused defines as per Georgi Djakov's review - Fixed the SDCC2 RPM master/slave IDs - Added an exception to stop writing LIMITCMDS to M_BKE_HEALTH_3 as it doesn't exist there (it seems to be harmless to write that there, but it's incorrect to) - Tested again on the aforementioned devices AngeloGioacchino Del Regno (2): dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC interconnect: qcom: Add SDM660 interconnect provider driver .../bindings/interconnect/qcom,sdm660.yaml | 147 +++ drivers/interconnect/qcom/Kconfig | 9 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/sdm660.c | 922 ++++++++++++++++++ .../dt-bindings/interconnect/qcom,sdm660.h | 116 +++ 5 files changed, 1196 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml create mode 100644 drivers/interconnect/qcom/sdm660.c create mode 100644 include/dt-bindings/interconnect/qcom,sdm660.h -- 2.28.0
next reply other threads:[~2020-10-17 13:37 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-17 13:37 kholk11 [this message] 2020-10-17 13:37 ` [PATCH v4 1/2] dt-bindings: interconnect: Add bindings for Qualcomm SDM660 NoC kholk11 2020-10-19 19:56 ` Rob Herring 2020-10-19 19:58 ` Rob Herring 2020-10-19 20:44 ` Martin Botka 2020-11-30 14:29 ` Rob Herring 2020-11-30 14:52 ` Georgi Djakov 2020-10-17 13:37 ` [PATCH v4 2/2] interconnect: qcom: Add SDM660 interconnect provider driver kholk11 2020-11-03 16:24 ` Georgi Djakov 2020-12-04 18:06 ` AngeloGioacchino Del Regno 2021-02-08 22:09 ` Konrad Dybcio 2021-02-09 10:53 ` Georgi Djakov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: [PATCH v4 0/2] Add SDM630/636/660 interconnect driver' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).