LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/3] drm/panel: mantix panel reset fixes
@ 2020-10-13 10:32 Guido Günther
  2020-10-13 10:32 ` [PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode Guido Günther
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Guido Günther @ 2020-10-13 10:32 UTC (permalink / raw)
  To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter,
	Rob Herring, dri-devel, devicetree, linux-kernel


The first patch in this series fixes dereferencing a NULL mode in the error
path. The second one extends the resets to not only reset RESX but also TP_RSTN
since otherwise the display will stay completely blank. I didn't spot that
before initial submission since the reset line was bound to the touch
controller and although that failed to probe it came far enough to deassert the
reset line (at an arbitrary point in time during boot) and hence we got a
picture. Since touch and panel are on the same IC they're not completely
independent and i might have to turn the whole thing into an MFD at some point
but this series gets the panel to a reliably working state on boot and on fb
blank/unblank.

Since the reset-gpios are active low we can deassert in prepare and assert in
unprepare simplifying the code making sure lines are kept low when the
panel is off.

The binding were not part of a stable kernel so I hope it's okay to not worry
about backward compatibility.

Changes from v1:
 - As per review comments by Fabio Estevam
   https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
   - Fix typo in commit messages
 - As per review comments by Rob Herring
   https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
   - Don't use an array of reset lines

Guido Günther (3):
  drm/panel: mantix: Don't dereference NULL mode
  drm/panel: mantix: Fix panel reset
  dt-binding: display: Require two resets on mantix panel

 .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
 2 files changed, 21 insertions(+), 8 deletions(-)

-- 
2.28.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode
  2020-10-13 10:32 [PATCH v2 0/3] drm/panel: mantix panel reset fixes Guido Günther
@ 2020-10-13 10:32 ` Guido Günther
  2020-10-13 10:32 ` [PATCH v2 2/3] drm/panel: mantix: Fix panel reset Guido Günther
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 11+ messages in thread
From: Guido Günther @ 2020-10-13 10:32 UTC (permalink / raw)
  To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter,
	Rob Herring, dri-devel, devicetree, linux-kernel

Don't dereference mode which was just NULL checked.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 3482e28e30fc..4a7fbf64bb7a 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -204,7 +204,7 @@ static int mantix_get_modes(struct drm_panel *panel,
 	if (!mode) {
 		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
 			default_mode.hdisplay, default_mode.vdisplay,
-			drm_mode_vrefresh(mode));
+			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;
 	}
 
-- 
2.28.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 2/3] drm/panel: mantix: Fix panel reset
  2020-10-13 10:32 [PATCH v2 0/3] drm/panel: mantix panel reset fixes Guido Günther
  2020-10-13 10:32 ` [PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode Guido Günther
@ 2020-10-13 10:32 ` Guido Günther
  2020-10-13 10:32 ` [PATCH v2 3/3] dt-binding: display: Require two resets on mantix panel Guido Günther
  2020-10-16 14:29 ` [PATCH v2 0/3] drm/panel: mantix panel reset fixes Sam Ravnborg
  3 siblings, 0 replies; 11+ messages in thread
From: Guido Günther @ 2020-10-13 10:32 UTC (permalink / raw)
  To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter,
	Rob Herring, dri-devel, devicetree, linux-kernel

The mantix panel needs two reset lines (RESX and TP_RSTN) deasserted to
output an image. Only deasserting RESX is not enough and the display
will stay blank. Deassert in prepare() and assert in unprepare() to keep
device held in reset when off.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 23 +++++++++++++------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index 4a7fbf64bb7a..0c5f22e95c2d 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -26,7 +26,9 @@
 struct mantix {
 	struct device *dev;
 	struct drm_panel panel;
+
 	struct gpio_desc *reset_gpio;
+	struct gpio_desc *tp_rstn_gpio;
 
 	struct regulator *avdd;
 	struct regulator *avee;
@@ -124,6 +126,10 @@ static int mantix_unprepare(struct drm_panel *panel)
 {
 	struct mantix *ctx = panel_to_mantix(panel);
 
+	gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 1);
+	usleep_range(5000, 6000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
 	regulator_disable(ctx->avee);
 	regulator_disable(ctx->avdd);
 	/* T11 */
@@ -165,13 +171,10 @@ static int mantix_prepare(struct drm_panel *panel)
 		return ret;
 	}
 
-	/* T3+T5 */
-	usleep_range(10000, 12000);
-
-	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-	usleep_range(5150, 7000);
-
+	/* T3 + T4 + time for voltage to become stable: */
+	usleep_range(6000, 7000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	gpiod_set_value_cansleep(ctx->tp_rstn_gpio, 0);
 
 	/* T6 */
 	msleep(50);
@@ -236,12 +239,18 @@ static int mantix_probe(struct mipi_dsi_device *dsi)
 	if (!ctx)
 		return -ENOMEM;
 
-	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
 		dev_err(dev, "cannot get reset gpio\n");
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
+	ctx->tp_rstn_gpio = devm_gpiod_get(dev, "mantix,tp-rstn", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->tp_rstn_gpio)) {
+		dev_err(dev, "cannot get tp-rstn gpio\n");
+		return PTR_ERR(ctx->tp_rstn_gpio);
+	}
+
 	mipi_dsi_set_drvdata(dsi, ctx);
 	ctx->dev = dev;
 
-- 
2.28.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v2 3/3] dt-binding: display: Require two resets on mantix panel
  2020-10-13 10:32 [PATCH v2 0/3] drm/panel: mantix panel reset fixes Guido Günther
  2020-10-13 10:32 ` [PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode Guido Günther
  2020-10-13 10:32 ` [PATCH v2 2/3] drm/panel: mantix: Fix panel reset Guido Günther
@ 2020-10-13 10:32 ` Guido Günther
  2020-10-16 14:29 ` [PATCH v2 0/3] drm/panel: mantix panel reset fixes Sam Ravnborg
  3 siblings, 0 replies; 11+ messages in thread
From: Guido Günther @ 2020-10-13 10:32 UTC (permalink / raw)
  To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter,
	Rob Herring, dri-devel, devicetree, linux-kernel

We need to reset both for the panel to show an image.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../bindings/display/panel/mantix,mlaf057we51-x.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
index 937323cc9aaa..51f423297ec8 100644
--- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -37,6 +37,9 @@ properties:
 
   reset-gpios: true
 
+  'mantix,tp-rstn-gpios':
+    description: second reset line that triggers DSI config load
+
   backlight: true
 
 required:
@@ -63,6 +66,7 @@ examples:
             avee-supply = <&reg_avee>;
             vddi-supply = <&reg_1v8_p>;
             reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
             backlight = <&backlight>;
         };
     };
-- 
2.28.0


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-13 10:32 [PATCH v2 0/3] drm/panel: mantix panel reset fixes Guido Günther
                   ` (2 preceding siblings ...)
  2020-10-13 10:32 ` [PATCH v2 3/3] dt-binding: display: Require two resets on mantix panel Guido Günther
@ 2020-10-16 14:29 ` Sam Ravnborg
  2020-10-17  9:13   ` Guido Günther
  3 siblings, 1 reply; 11+ messages in thread
From: Sam Ravnborg @ 2020-10-16 14:29 UTC (permalink / raw)
  To: Guido Günther
  Cc: Thierry Reding, David Airlie, Daniel Vetter, Rob Herring,
	dri-devel, devicetree, linux-kernel

Hi Guido.
On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> 
> The first patch in this series fixes dereferencing a NULL mode in the error
> path. The second one extends the resets to not only reset RESX but also TP_RSTN
> since otherwise the display will stay completely blank. I didn't spot that
> before initial submission since the reset line was bound to the touch
> controller and although that failed to probe it came far enough to deassert the
> reset line (at an arbitrary point in time during boot) and hence we got a
> picture. Since touch and panel are on the same IC they're not completely
> independent and i might have to turn the whole thing into an MFD at some point
> but this series gets the panel to a reliably working state on boot and on fb
> blank/unblank.
> 
> Since the reset-gpios are active low we can deassert in prepare and assert in
> unprepare simplifying the code making sure lines are kept low when the
> panel is off.
> 
> The binding were not part of a stable kernel so I hope it's okay to not worry
> about backward compatibility.
> 
> Changes from v1:
>  - As per review comments by Fabio Estevam
>    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
>    - Fix typo in commit messages
>  - As per review comments by Rob Herring
>    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
>    - Don't use an array of reset lines
> 
> Guido Günther (3):
>   drm/panel: mantix: Don't dereference NULL mode
>   drm/panel: mantix: Fix panel reset
>   dt-binding: display: Require two resets on mantix panel

All applied to drm-misc-next and pushed out.
And then I remembered you had commit right - sigh.

	Sam

> 
>  .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
>  .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
>  2 files changed, 21 insertions(+), 8 deletions(-)
> 
> -- 
> 2.28.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-16 14:29 ` [PATCH v2 0/3] drm/panel: mantix panel reset fixes Sam Ravnborg
@ 2020-10-17  9:13   ` Guido Günther
  2020-10-17 10:47     ` Sam Ravnborg
  0 siblings, 1 reply; 11+ messages in thread
From: Guido Günther @ 2020-10-17  9:13 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: Thierry Reding, David Airlie, Daniel Vetter, Rob Herring,
	dri-devel, devicetree, linux-kernel

Hi Sam,
On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
[..snip..]
> > 
> > Changes from v1:
> >  - As per review comments by Fabio Estevam
> >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> >    - Fix typo in commit messages
> >  - As per review comments by Rob Herring
> >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> >    - Don't use an array of reset lines
> > 
> > Guido Günther (3):
> >   drm/panel: mantix: Don't dereference NULL mode
> >   drm/panel: mantix: Fix panel reset
> >   dt-binding: display: Require two resets on mantix panel
> 
> All applied to drm-misc-next and pushed out.
> And then I remembered you had commit right - sigh.

Thanks! Is there any special care needed to get that into 5.10? The
driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
Cheers,
 -- Guido

> 
> 	Sam
> 
> > 
> >  .../display/panel/mantix,mlaf057we51-x.yaml   |  4 +++
> >  .../gpu/drm/panel/panel-mantix-mlaf057we51.c  | 25 +++++++++++++------
> >  2 files changed, 21 insertions(+), 8 deletions(-)
> > 
> > -- 
> > 2.28.0
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-17  9:13   ` Guido Günther
@ 2020-10-17 10:47     ` Sam Ravnborg
  2020-10-18 13:01       ` Guido Günther
  2020-10-19 15:44       ` Daniel Vetter
  0 siblings, 2 replies; 11+ messages in thread
From: Sam Ravnborg @ 2020-10-17 10:47 UTC (permalink / raw)
  To: Guido Günther
  Cc: Thierry Reding, David Airlie, Daniel Vetter, Rob Herring,
	dri-devel, devicetree, linux-kernel

Hi Guido.

On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> Hi Sam,
> On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> [..snip..]
> > > 
> > > Changes from v1:
> > >  - As per review comments by Fabio Estevam
> > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > >    - Fix typo in commit messages
> > >  - As per review comments by Rob Herring
> > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > >    - Don't use an array of reset lines
> > > 
> > > Guido Günther (3):
> > >   drm/panel: mantix: Don't dereference NULL mode
> > >   drm/panel: mantix: Fix panel reset
> > >   dt-binding: display: Require two resets on mantix panel
> > 
> > All applied to drm-misc-next and pushed out.
> > And then I remembered you had commit right - sigh.
> 
> Thanks! Is there any special care needed to get that into 5.10? The
> driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.

As the patches was applied to drm-misc-next the easiet path would
be to cherry-pick them and apply to drm-misc-fixes.
dim has cherry-pick support - try to use it rahter than doing it by
hand.

When you apply to drm-misc-fixes include a Fixes: tag so the tooling
will pick the patches automagically.

In hindsight the patches should have carried a Fixes: tag from a start
and should have been applied to drm-misc-fixes from a start too.

I have done something like above once or twice but anyway reach out if
you have questions. Or ask at #dri-devel.

	Sam

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-17 10:47     ` Sam Ravnborg
@ 2020-10-18 13:01       ` Guido Günther
  2020-10-18 13:38         ` Sam Ravnborg
  2020-10-19 15:44       ` Daniel Vetter
  1 sibling, 1 reply; 11+ messages in thread
From: Guido Günther @ 2020-10-18 13:01 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: Thierry Reding, David Airlie, Daniel Vetter, Rob Herring,
	dri-devel, devicetree, linux-kernel

Hi Sam,
On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> 
> On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > [..snip..]
> > > > 
> > > > Changes from v1:
> > > >  - As per review comments by Fabio Estevam
> > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > >    - Fix typo in commit messages
> > > >  - As per review comments by Rob Herring
> > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > >    - Don't use an array of reset lines
> > > > 
> > > > Guido Günther (3):
> > > >   drm/panel: mantix: Don't dereference NULL mode
> > > >   drm/panel: mantix: Fix panel reset
> > > >   dt-binding: display: Require two resets on mantix panel
> > > 
> > > All applied to drm-misc-next and pushed out.
> > > And then I remembered you had commit right - sigh.
> > 
> > Thanks! Is there any special care needed to get that into 5.10? The
> > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> 
> As the patches was applied to drm-misc-next the easiet path would
> be to cherry-pick them and apply to drm-misc-fixes.
> dim has cherry-pick support - try to use it rahter than doing it by
> hand.

Does that require any further ACKs or just cherry-pick and push out?

> When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> will pick the patches automagically.

Will do. It was unfortunate that the initial ones didn't get them but
i think the drm merge happened while v2 was out on the list. I'll try
add that relevant information to the cover letter in the future.

Cheers,
 -- Guido

> 
> In hindsight the patches should have carried a Fixes: tag from a start
> and should have been applied to drm-misc-fixes from a start too.
> 
> I have done something like above once or twice but anyway reach out if
> you have questions. Or ask at #dri-devel.
> 
> 	Sam
> 

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-18 13:01       ` Guido Günther
@ 2020-10-18 13:38         ` Sam Ravnborg
  2020-10-19 14:39           ` Guido Günther
  0 siblings, 1 reply; 11+ messages in thread
From: Sam Ravnborg @ 2020-10-18 13:38 UTC (permalink / raw)
  To: Guido Günther
  Cc: devicetree, David Airlie, linux-kernel, dri-devel, Rob Herring,
	Thierry Reding

 Hi Guido
> On Sun, Oct 18, 2020 at 03:01:22PM +0200, Guido Günther wrote:
> Hi Sam,
> On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > Hi Guido.
> > 
> > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > Hi Sam,
> > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > Hi Guido.
> > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > [..snip..]
> > > > > 
> > > > > Changes from v1:
> > > > >  - As per review comments by Fabio Estevam
> > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > >    - Fix typo in commit messages
> > > > >  - As per review comments by Rob Herring
> > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > >    - Don't use an array of reset lines
> > > > > 
> > > > > Guido Günther (3):
> > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > >   drm/panel: mantix: Fix panel reset
> > > > >   dt-binding: display: Require two resets on mantix panel
> > > > 
> > > > All applied to drm-misc-next and pushed out.
> > > > And then I remembered you had commit right - sigh.
> > > 
> > > Thanks! Is there any special care needed to get that into 5.10? The
> > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > 
> > As the patches was applied to drm-misc-next the easiet path would
> > be to cherry-pick them and apply to drm-misc-fixes.
> > dim has cherry-pick support - try to use it rahter than doing it by
> > hand.
> 
> Does that require any further ACKs or just cherry-pick and push out?
To the best of my knowledge just cherry-pick, test and push out.

	Sam

> 
> > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > will pick the patches automagically.
> 
> Will do. It was unfortunate that the initial ones didn't get them but
> i think the drm merge happened while v2 was out on the list. I'll try
> add that relevant information to the cover letter in the future.
> 
> Cheers,
>  -- Guido
> 
> > 
> > In hindsight the patches should have carried a Fixes: tag from a start
> > and should have been applied to drm-misc-fixes from a start too.
> > 
> > I have done something like above once or twice but anyway reach out if
> > you have questions. Or ask at #dri-devel.
> > 
> > 	Sam
> > 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-18 13:38         ` Sam Ravnborg
@ 2020-10-19 14:39           ` Guido Günther
  0 siblings, 0 replies; 11+ messages in thread
From: Guido Günther @ 2020-10-19 14:39 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: devicetree, David Airlie, linux-kernel, dri-devel, Rob Herring,
	Thierry Reding

Hi,
On Sun, Oct 18, 2020 at 03:38:45PM +0200, Sam Ravnborg wrote:
>  Hi Guido
> > On Sun, Oct 18, 2020 at 03:01:22PM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > 
> > > On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > > > Hi Sam,
> > > > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > > > Hi Guido.
> > > > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > > > [..snip..]
> > > > > > 
> > > > > > Changes from v1:
> > > > > >  - As per review comments by Fabio Estevam
> > > > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > > > >    - Fix typo in commit messages
> > > > > >  - As per review comments by Rob Herring
> > > > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > > > >    - Don't use an array of reset lines
> > > > > > 
> > > > > > Guido Günther (3):
> > > > > >   drm/panel: mantix: Don't dereference NULL mode
> > > > > >   drm/panel: mantix: Fix panel reset
> > > > > >   dt-binding: display: Require two resets on mantix panel
> > > > > 
> > > > > All applied to drm-misc-next and pushed out.
> > > > > And then I remembered you had commit right - sigh.
> > > > 
> > > > Thanks! Is there any special care needed to get that into 5.10? The
> > > > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> > > 
> > > As the patches was applied to drm-misc-next the easiet path would
> > > be to cherry-pick them and apply to drm-misc-fixes.
> > > dim has cherry-pick support - try to use it rahter than doing it by
> > > hand.
> > 
> > Does that require any further ACKs or just cherry-pick and push out?
> To the best of my knowledge just cherry-pick, test and push out.

drm-misc-fixes does not yet have the corresponding code so i assume i
have to wait for back merge of 5.10-rc1 ? At least

   https://drm.pages.freedesktop.org/maintainer-tools/drm-misc.html

seems to indicate that.
Cheers,
 -- Guido

> 
> 	Sam
> 
> > 
> > > When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> > > will pick the patches automagically.
> > 
> > Will do. It was unfortunate that the initial ones didn't get them but
> > i think the drm merge happened while v2 was out on the list. I'll try
> > add that relevant information to the cover letter in the future.
> > 
> > Cheers,
> >  -- Guido
> > 
> > > 
> > > In hindsight the patches should have carried a Fixes: tag from a start
> > > and should have been applied to drm-misc-fixes from a start too.
> > > 
> > > I have done something like above once or twice but anyway reach out if
> > > you have questions. Or ask at #dri-devel.
> > > 
> > > 	Sam
> > > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v2 0/3] drm/panel: mantix panel reset fixes
  2020-10-17 10:47     ` Sam Ravnborg
  2020-10-18 13:01       ` Guido Günther
@ 2020-10-19 15:44       ` Daniel Vetter
  1 sibling, 0 replies; 11+ messages in thread
From: Daniel Vetter @ 2020-10-19 15:44 UTC (permalink / raw)
  To: Sam Ravnborg
  Cc: Guido Günther, Thierry Reding, David Airlie, Daniel Vetter,
	Rob Herring, dri-devel, devicetree, linux-kernel

On Sat, Oct 17, 2020 at 12:47:36PM +0200, Sam Ravnborg wrote:
> Hi Guido.
> 
> On Sat, Oct 17, 2020 at 11:13:07AM +0200, Guido Günther wrote:
> > Hi Sam,
> > On Fri, Oct 16, 2020 at 04:29:16PM +0200, Sam Ravnborg wrote:
> > > Hi Guido.
> > > On Tue, Oct 13, 2020 at 12:32:45PM +0200, Guido Günther wrote:
> > [..snip..]
> > > > 
> > > > Changes from v1:
> > > >  - As per review comments by Fabio Estevam
> > > >    https://lore.kernel.org/dri-devel/CAOMZO5B5ECcConvKej=RcaF8wvOxgq7nUzKJ-ad0aSAOzUqtbQ@mail.gmail.com/
> > > >    - Fix typo in commit messages
> > > >  - As per review comments by Rob Herring
> > > >    https://lore.kernel.org/dri-devel/20200929174624.GA832332@bogus/
> > > >    - Don't use an array of reset lines
> > > > 
> > > > Guido Günther (3):
> > > >   drm/panel: mantix: Don't dereference NULL mode
> > > >   drm/panel: mantix: Fix panel reset
> > > >   dt-binding: display: Require two resets on mantix panel
> > > 
> > > All applied to drm-misc-next and pushed out.
> > > And then I remembered you had commit right - sigh.
> > 
> > Thanks! Is there any special care needed to get that into 5.10? The
> > driver landed there in 72967d5616d3f0c714f8eb6c4e258179a9031c45.
> 
> As the patches was applied to drm-misc-next the easiet path would
> be to cherry-pick them and apply to drm-misc-fixes.
> dim has cherry-pick support - try to use it rahter than doing it by
> hand.

drm-misc-next-fixes while we're between freeze and merge window end:

https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc.html#where-do-i-apply-my-patch

Cheers, Daniel

> 

> When you apply to drm-misc-fixes include a Fixes: tag so the tooling
> will pick the patches automagically.
> 
> In hindsight the patches should have carried a Fixes: tag from a start
> and should have been applied to drm-misc-fixes from a start too.
> 
> I have done something like above once or twice but anyway reach out if
> you have questions. Or ask at #dri-devel.
> 
> 	Sam

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13 10:32 [PATCH v2 0/3] drm/panel: mantix panel reset fixes Guido Günther
2020-10-13 10:32 ` [PATCH v2 1/3] drm/panel: mantix: Don't dereference NULL mode Guido Günther
2020-10-13 10:32 ` [PATCH v2 2/3] drm/panel: mantix: Fix panel reset Guido Günther
2020-10-13 10:32 ` [PATCH v2 3/3] dt-binding: display: Require two resets on mantix panel Guido Günther
2020-10-16 14:29 ` [PATCH v2 0/3] drm/panel: mantix panel reset fixes Sam Ravnborg
2020-10-17  9:13   ` Guido Günther
2020-10-17 10:47     ` Sam Ravnborg
2020-10-18 13:01       ` Guido Günther
2020-10-18 13:38         ` Sam Ravnborg
2020-10-19 14:39           ` Guido Günther
2020-10-19 15:44       ` Daniel Vetter

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git