* [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
[not found] <cover.1602701516.git.npcomplete13@gmail.com>
@ 2020-10-14 19:27 ` Vivek Unune
2020-10-22 20:16 ` Vivek Unune
2020-10-22 20:41 ` Florian Fainelli
0 siblings, 2 replies; 5+ messages in thread
From: Vivek Unune @ 2020-10-14 19:27 UTC (permalink / raw)
Cc: florian.fainelli, Vivek Unune, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Rob Herring,
linux-arm-kernel, devicetree, linux-kernel
Add ports 5 and 7 which are connected to gmac cores 1 & 2.
These will be disabled for now.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
.../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 9fcd215177d7..0ff502d5aa0c 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -242,6 +242,30 @@ port@4 {
label = "wan";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac0>;
+ label = "cpu";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ ethernet = <&gmac1>;
+ label = "cpu";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
port@8 {
reg = <8>;
ethernet = <&gmac2>;
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
2020-10-14 19:27 ` [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7 Vivek Unune
@ 2020-10-22 20:16 ` Vivek Unune
2020-10-22 20:21 ` Florian Fainelli
2020-10-22 20:41 ` Florian Fainelli
1 sibling, 1 reply; 5+ messages in thread
From: Vivek Unune @ 2020-10-22 20:16 UTC (permalink / raw)
To: florian.fainelli, Hauke Mehrtens, Rafał Miłecki,
bcm-kernel-feedback-list, Rob Herring, linux-arm-kernel,
devicetree, linux-kernel
On Wed, Oct 14, 2020 at 03:27:27PM -0400, Vivek Unune wrote:
> Add ports 5 and 7 which are connected to gmac cores 1 & 2.
> These will be disabled for now.
>
> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
> ---
> .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> index 9fcd215177d7..0ff502d5aa0c 100644
> --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> @@ -242,6 +242,30 @@ port@4 {
> label = "wan";
> };
>
> + port@5 {
> + reg = <5>;
> + ethernet = <&gmac0>;
> + label = "cpu";
> + status = "disabled";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> +
> + port@7 {
> + reg = <7>;
> + ethernet = <&gmac1>;
> + label = "cpu";
> + status = "disabled";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> +
> port@8 {
> reg = <8>;
> ethernet = <&gmac2>;
> --
> 2.25.1
>
Any feedback?
Thanks!
Vivek
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
2020-10-22 20:16 ` Vivek Unune
@ 2020-10-22 20:21 ` Florian Fainelli
2020-10-22 20:24 ` Vivek Unune
0 siblings, 1 reply; 5+ messages in thread
From: Florian Fainelli @ 2020-10-22 20:21 UTC (permalink / raw)
To: Vivek Unune, florian.fainelli, Hauke Mehrtens,
Rafał Miłecki, bcm-kernel-feedback-list, Rob Herring,
linux-arm-kernel, devicetree, linux-kernel
On 10/22/20 1:16 PM, Vivek Unune wrote:
> On Wed, Oct 14, 2020 at 03:27:27PM -0400, Vivek Unune wrote:
>> Add ports 5 and 7 which are connected to gmac cores 1 & 2.
>> These will be disabled for now.
>>
>> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
>> ---
>> .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
>> index 9fcd215177d7..0ff502d5aa0c 100644
>> --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
>> +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
>> @@ -242,6 +242,30 @@ port@4 {
>> label = "wan";
>> };
>>
>> + port@5 {
>> + reg = <5>;
>> + ethernet = <&gmac0>;
>> + label = "cpu";
>> + status = "disabled";
>> +
>> + fixed-link {
>> + speed = <1000>;
>> + full-duplex;
>> + };
>> + };
>> +
>> + port@7 {
>> + reg = <7>;
>> + ethernet = <&gmac1>;
>> + label = "cpu";
>> + status = "disabled";
>> +
>> + fixed-link {
>> + speed = <1000>;
>> + full-duplex;
>> + };
>> + };
>> +
>> port@8 {
>> reg = <8>;
>> ethernet = <&gmac2>;
>> --
>> 2.25.1
>>
>
> Any feedback?
Going through my queue of patches, I should be able to apply this patch
soon.
--
Florian
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
2020-10-22 20:21 ` Florian Fainelli
@ 2020-10-22 20:24 ` Vivek Unune
0 siblings, 0 replies; 5+ messages in thread
From: Vivek Unune @ 2020-10-22 20:24 UTC (permalink / raw)
To: Florian Fainelli
Cc: florian.fainelli, Hauke Mehrtens, Rafał Miłecki,
bcm-kernel-feedback-list, Rob Herring, linux-arm-kernel,
devicetree, linux-kernel
On Thu, Oct 22, 2020 at 01:21:10PM -0700, Florian Fainelli wrote:
> On 10/22/20 1:16 PM, Vivek Unune wrote:
> > On Wed, Oct 14, 2020 at 03:27:27PM -0400, Vivek Unune wrote:
> >> Add ports 5 and 7 which are connected to gmac cores 1 & 2.
> >> These will be disabled for now.
> >>
> >> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
> >> ---
> >> .../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
> >> 1 file changed, 24 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> >> index 9fcd215177d7..0ff502d5aa0c 100644
> >> --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> >> +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> >> @@ -242,6 +242,30 @@ port@4 {
> >> label = "wan";
> >> };
> >>
> >> + port@5 {
> >> + reg = <5>;
> >> + ethernet = <&gmac0>;
> >> + label = "cpu";
> >> + status = "disabled";
> >> +
> >> + fixed-link {
> >> + speed = <1000>;
> >> + full-duplex;
> >> + };
> >> + };
> >> +
> >> + port@7 {
> >> + reg = <7>;
> >> + ethernet = <&gmac1>;
> >> + label = "cpu";
> >> + status = "disabled";
> >> +
> >> + fixed-link {
> >> + speed = <1000>;
> >> + full-duplex;
> >> + };
> >> + };
> >> +
> >> port@8 {
> >> reg = <8>;
> >> ethernet = <&gmac2>;
> >> --
> >> 2.25.1
> >>
> >
> > Any feedback?
>
> Going through my queue of patches, I should be able to apply this patch
> soon.
Hi Florian,
Thanks for quick response!
-Vivek
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
2020-10-14 19:27 ` [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7 Vivek Unune
2020-10-22 20:16 ` Vivek Unune
@ 2020-10-22 20:41 ` Florian Fainelli
1 sibling, 0 replies; 5+ messages in thread
From: Florian Fainelli @ 2020-10-22 20:41 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Vivek Unune
Cc: devicetree, florian.fainelli, Hauke Mehrtens,
Rafał Miłecki, linux-kernel, Rob Herring,
linux-arm-kernel
On Wed, 14 Oct 2020 15:27:27 -0400, Vivek Unune <npcomplete13@gmail.com> wrote:
> Add ports 5 and 7 which are connected to gmac cores 1 & 2.
> These will be disabled for now.
>
> Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-10-22 20:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cover.1602701516.git.npcomplete13@gmail.com>
2020-10-14 19:27 ` [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7 Vivek Unune
2020-10-22 20:16 ` Vivek Unune
2020-10-22 20:21 ` Florian Fainelli
2020-10-22 20:24 ` Vivek Unune
2020-10-22 20:41 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).