From: Ioana Ciornei <ciorneiioana@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH net-next v2 07/19] net: phy: mscc: implement generic .handle_interrupt() callback
Date: Sun, 1 Nov 2020 14:51:02 +0200 [thread overview]
Message-ID: <20201101125114.1316879-8-ciorneiioana@gmail.com> (raw)
In-Reply-To: <20201101125114.1316879-1-ciorneiioana@gmail.com>
From: Ioana Ciornei <ioana.ciornei@nxp.com>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Also, remove the .did_interrupt() callback since it's not anymore used.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
- adjust .handle_interrupt() so that we only take into account the
enabled IRQs.
drivers/net/phy/mscc/mscc_main.c | 56 ++++++++++++++++----------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index b705121c9d26..48883730bf6f 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1541,16 +1541,6 @@ static int vsc85xx_config_init(struct phy_device *phydev)
return 0;
}
-static int vsc8584_did_interrupt(struct phy_device *phydev)
-{
- int rc = 0;
-
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- rc = phy_read(phydev, MII_VSC85XX_INT_STATUS);
-
- return (rc < 0) ? 0 : rc & MII_VSC85XX_INT_MASK_MASK;
-}
-
static int vsc8514_config_pre_init(struct phy_device *phydev)
{
/* These are the settings to override the silicon default
@@ -1948,6 +1938,24 @@ static int vsc85xx_config_intr(struct phy_device *phydev)
return rc;
}
+static irqreturn_t vsc85xx_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & MII_VSC85XX_INT_MASK_MASK))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int vsc85xx_config_aneg(struct phy_device *phydev)
{
int rc;
@@ -2114,7 +2122,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2139,9 +2147,8 @@ static struct phy_driver vsc85xx_driver[] = {
.config_aneg = &vsc85xx_config_aneg,
.aneg_done = &genphy_aneg_done,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8574_probe,
@@ -2163,7 +2170,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc8514_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2187,7 +2194,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2211,7 +2218,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2235,7 +2242,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2259,7 +2266,7 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc85xx_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
@@ -2283,9 +2290,8 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8574_probe,
@@ -2308,9 +2314,8 @@ static struct phy_driver vsc85xx_driver[] = {
.config_init = &vsc8584_config_init,
.config_aneg = &vsc85xx_config_aneg,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8584_probe,
@@ -2335,7 +2340,6 @@ static struct phy_driver vsc85xx_driver[] = {
.handle_interrupt = &vsc8584_handle_interrupt,
.ack_interrupt = &vsc85xx_ack_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8574_probe,
@@ -2359,9 +2363,8 @@ static struct phy_driver vsc85xx_driver[] = {
.config_aneg = &vsc85xx_config_aneg,
.aneg_done = &genphy_aneg_done,
.read_status = &vsc85xx_read_status,
- .ack_interrupt = &vsc85xx_ack_interrupt,
+ .handle_interrupt = vsc85xx_handle_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8574_probe,
@@ -2388,7 +2391,6 @@ static struct phy_driver vsc85xx_driver[] = {
.handle_interrupt = &vsc8584_handle_interrupt,
.ack_interrupt = &vsc85xx_ack_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8584_probe,
@@ -2413,7 +2415,6 @@ static struct phy_driver vsc85xx_driver[] = {
.handle_interrupt = &vsc8584_handle_interrupt,
.ack_interrupt = &vsc85xx_ack_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8584_probe,
@@ -2438,7 +2439,6 @@ static struct phy_driver vsc85xx_driver[] = {
.handle_interrupt = &vsc8584_handle_interrupt,
.ack_interrupt = &vsc85xx_ack_interrupt,
.config_intr = &vsc85xx_config_intr,
- .did_interrupt = &vsc8584_did_interrupt,
.suspend = &genphy_suspend,
.resume = &genphy_resume,
.probe = &vsc8584_probe,
--
2.28.0
next prev parent reply other threads:[~2020-11-01 12:54 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-01 12:50 [PATCH net-next v2 00/19] net: phy: add support for shared interrupts (part 1) Ioana Ciornei
2020-11-01 12:50 ` [PATCH net-next v2 01/19] net: phy: export phy_error and phy_trigger_machine Ioana Ciornei
2020-11-01 12:50 ` [PATCH net-next v2 02/19] net: phy: add a shutdown procedure Ioana Ciornei
2023-08-03 18:16 ` Uwe Kleine-König
2023-08-03 18:24 ` Florian Fainelli
2023-08-03 18:49 ` Russell King (Oracle)
2020-11-01 12:50 ` [PATCH net-next v2 03/19] net: phy: make .ack_interrupt() optional Ioana Ciornei
2020-11-01 12:50 ` [PATCH net-next v2 04/19] net: phy: at803x: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-04 18:09 ` Oleksij Rempel
2020-11-01 12:51 ` [PATCH net-next v2 05/19] net: phy: at803x: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-04 18:09 ` Oleksij Rempel
2020-11-01 12:51 ` [PATCH net-next v2 06/19] net: phy: mscc: use phy_trigger_machine() to notify link change Ioana Ciornei
2020-11-05 0:10 ` Vladimir Oltean
2020-11-01 12:51 ` Ioana Ciornei [this message]
2020-11-05 0:08 ` [PATCH net-next v2 07/19] net: phy: mscc: implement generic .handle_interrupt() callback Vladimir Oltean
2020-11-01 12:51 ` [PATCH net-next v2 08/19] net: phy: mscc: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-05 0:07 ` Vladimir Oltean
2020-11-01 12:51 ` [PATCH net-next v2 09/19] net: phy: aquantia: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 10/19] net: phy: aquantia: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 11/19] net: phy: broadcom: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 12/19] net: phy: broadcom: remove use of ack_interrupt() Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 13/19] net: phy: cicada: implement the generic .handle_interrupt() callback Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 14/19] net: phy: cicada: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 15/19] net: phy: davicom: implement generic .handle_interrupt() calback Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 16/19] net: phy: davicom: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 17/19] net: phy: add genphy_handle_interrupt_no_ack() Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 18/19] net: phy: realtek: implement generic .handle_interrupt() callback Ioana Ciornei
2020-11-01 12:51 ` [PATCH net-next v2 19/19] net: phy: realtek: remove the use of .ack_interrupt() Ioana Ciornei
2020-11-03 16:44 ` [PATCH net-next v2 00/19] net: phy: add support for shared interrupts (part 1) Andrew Lunn
2020-11-03 22:53 ` Michael Walle
2020-11-06 0:36 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201101125114.1316879-8-ciorneiioana@gmail.com \
--to=ciorneiioana@gmail.com \
--cc=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).