[PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[Lee Jones]

 [Last batch!]

This set is part of a larger effort attempting to clean-up W=1
kernel builds, which are currently overwhelmingly riddled with
niggly little warnings.

Lee Jones (41):
  wil6210: wmi: Correct misnamed function parameter 'ptr_'
  rsi_91x_usb: Fix some basic kernel-doc issues
  rtl8192cu: mac: Fix some missing/ill-documented function parameters
  rsi_91x_usb_ops: Source file headers are not good candidates for
    kernel-doc
  rtl8192cu: trx: Demote clear abuse of kernel-doc format
  brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
  brcmfmac: pcie: Provide description for missing function parameter
    'devinfo'
  iwlwifi: mvm: rs: Demote non-conformant function documentation headers
  wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
  ath9k: ar9330_1p1_initvals: Remove unused const variable
    'ar9331_common_tx_gain_offset1_1'
  ath9k: ar9340_initvals: Remove unused const variable
    'ar9340Modes_ub124_tx_gain_table_1p0'
  ath9k: ar9485_initvals: Remove unused const variable
    'ar9485_fast_clock_1_1_baseband_postamble'
  ath9k: ar9003_2p2_initvals: Remove unused const variables
  prism54: isl_ioctl: Fix one function header and demote another
  iwlwifi: iwl-eeprom-read: Demote one nonconformant function header
  iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's
    header
  intersil: hostap_hw: Prevent incompatible function type cast
  brcm80211: fweh: Add missing description for 'gfp'
  ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg'
    param
  ath9k: ar5008_phy: Demote half completed function headers
  ath: dfs_pattern_detector: Fix some function kernel-doc headers
  ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers
  iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'
  wl3501_cs: Fix misspelling and provide missing documentation
  rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
  rtlwifi: phy: Remove set but unused variable 'bbvalue'
  rtlwifi: halbtc8821a1ant: Remove set but unused variable
    'wifi_rssi_state'
  rtl8723be: phy: Remove set but unused variable 'lc_cal'
  rtl8188ee: phy: Remove set but unused variable 'reg_ea4'
  rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
  mwifiex: pcie: Remove a couple of unchecked 'ret's
  rtl8723be: trx: Remove set but unused variable 'cck_highpwr'
  rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
  rtl8821ae: phy: Place braces around empty if() body
  wlcore: spi: Demote a non-compliant function header, fix another
  rtw8822b: Return type is not const
  iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header
  realtek: rtw8822c: Remove unused variable 'corr_val'
  ath9k: dynack: Demote non-compliant function header
  iwlwifi: fw: acpi: Demote non-conformant function headers
  realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

 drivers/net/wireless/ath/ath9k/ar5008_phy.c   |  15 +--
 .../wireless/ath/ath9k/ar9003_2p2_initvals.h  |  14 ---
 .../wireless/ath/ath9k/ar9330_1p1_initvals.h  |   7 --
 .../net/wireless/ath/ath9k/ar9340_initvals.h  | 101 ------------------
 .../net/wireless/ath/ath9k/ar9485_initvals.h  |   7 --
 drivers/net/wireless/ath/ath9k/dynack.c       |   3 +-
 .../net/wireless/ath/dfs_pattern_detector.c   |  14 +--
 drivers/net/wireless/ath/dfs_pri_detector.c   |   9 +-
 drivers/net/wireless/ath/regd.c               |   1 +
 drivers/net/wireless/ath/wil6210/wmi.c        |   2 +-
 .../broadcom/brcm80211/brcmfmac/bcmsdh.c      |   2 +-
 .../broadcom/brcm80211/brcmfmac/fweh.c        |   1 +
 .../broadcom/brcm80211/brcmfmac/pcie.c        |   1 +
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c  |  12 +--
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c   |   2 +-
 .../wireless/intel/iwlwifi/iwl-eeprom-parse.c |  12 +--
 .../wireless/intel/iwlwifi/iwl-eeprom-read.c  |   2 +-
 .../net/wireless/intel/iwlwifi/iwl-phy-db.c   |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c   |  10 +-
 .../net/wireless/intersil/hostap/hostap_hw.c  |  19 ++--
 .../net/wireless/intersil/prism54/isl_ioctl.c |   5 +-
 drivers/net/wireless/marvell/mwifiex/pcie.c   |   6 +-
 .../rtlwifi/btcoexist/halbtc8723b2ant.c       |  48 ++++-----
 .../rtlwifi/btcoexist/halbtc8821a1ant.c       |   4 +-
 .../rtlwifi/btcoexist/halbtc8821a2ant.c       |  27 +++--
 .../wireless/realtek/rtlwifi/rtl8188ee/phy.c  |   4 +-
 .../wireless/realtek/rtlwifi/rtl8192cu/mac.c  |   7 +-
 .../wireless/realtek/rtlwifi/rtl8192cu/trx.c  |   2 +-
 .../wireless/realtek/rtlwifi/rtl8723ae/phy.c  |   4 +-
 .../wireless/realtek/rtlwifi/rtl8723be/phy.c  |   4 +-
 .../wireless/realtek/rtlwifi/rtl8723be/trx.c  |   4 +-
 .../wireless/realtek/rtlwifi/rtl8821ae/phy.c  |   8 +-
 drivers/net/wireless/realtek/rtw88/pci.h      |   4 +
 drivers/net/wireless/realtek/rtw88/rtw8822b.c |   2 +-
 drivers/net/wireless/realtek/rtw88/rtw8822c.c |   4 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c        |   6 +-
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c    |   2 +-
 drivers/net/wireless/ti/wl1251/cmd.c          |   2 +-
 drivers/net/wireless/ti/wlcore/spi.c          |   3 +-
 drivers/net/wireless/wl3501_cs.c              |   8 +-
 40 files changed, 120 insertions(+), 270 deletions(-)

-- 
2.25.1

[PATCH 01/41] wil6210: wmi: Correct misnamed function parameter 'ptr_'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'
 drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Excess function parameter 'ptr' description in 'wmi_buffer_block'

Cc: Maya Erez <merez@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: wil6210@qti.qualcomm.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 421aebbb49e54..8699f8279a8be 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -262,7 +262,7 @@ struct fw_map *wil_find_fw_mapping(const char *section)
 /**
  * Check address validity for WMI buffer; remap if needed
  * @wil: driver data
- * @ptr: internal (linker) fw/ucode address
+ * @ptr_: internal (linker) fw/ucode address
  * @size: if non zero, validate the block does not
  *  exceed the device memory (bar)
  *
-- 
2.25.1

Re: [PATCH 01/41] wil6210: wmi: Correct misnamed function parameter 'ptr_'

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Function parameter or member 'ptr_' not described in 'wmi_buffer_block'
>  drivers/net/wireless/ath/wil6210/wmi.c:279: warning: Excess function parameter 'ptr' description in 'wmi_buffer_block'
> 
> Cc: Maya Erez <merez@codeaurora.org>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: wil6210@qti.qualcomm.com
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

c9621dd21e3b wil6210: wmi: Correct misnamed function parameter 'ptr_'

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-2-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 02/41] rsi_91x_usb: Fix some basic kernel-doc issues

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; '
 drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple'
 drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple'
 drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit'
 drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit'

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index a62d41c0ccbc0..8928e14671512 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -1,4 +1,4 @@
-/**
+/*
  * Copyright (c) 2014 Redpine Signals Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
@@ -75,7 +75,7 @@ static int rsi_usb_card_write(struct rsi_hw *adapter,
  * rsi_write_multiple() - This function writes multiple bytes of information
  *			  to the USB card.
  * @adapter: Pointer to the adapter structure.
- * @addr: Address of the register.
+ * @endpoint: Type of endpoint.
  * @data: Pointer to the data that has to be written.
  * @count: Number of multiple bytes to be written.
  *
@@ -313,6 +313,8 @@ static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
 /**
  * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
  * @adapter: Pointer to the adapter structure.
+ * @ep_num: Endpoint number.
+ * @mem_flags: The type of memory to allocate.
  *
  * Return: 0 on success, a negative error code on failure.
  */
-- 
2.25.1

Re: [02/41] rsi: rsi_91x_usb: Fix some basic kernel-doc issues

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; '
>  drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple'
>  drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple'
>  drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit'
>  drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit'
> 
> Cc: Amitkumar Karwar <amitkarwar@gmail.com>
> Cc: Siva Rebbagondla <siva8118@gmail.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

2 patches applied to wireless-drivers-next.git, thanks.

f21e6c5822f2 rsi: rsi_91x_usb: Fix some basic kernel-doc issues
63636b385e39 rsi: rsi_91x_usb_ops: Source file headers are not good candidates for kernel-doc

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-3-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 03/41] rtl8192cu: mac: Fix some missing/ill-documented function parameters

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Function parameter or member 'hw' not described in 'rtl92c_llt_write'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Excess function parameter 'io' description in 'rtl92c_llt_write'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Function parameter or member 'hw' not described in 'rtl92c_init_llt_table'
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Excess function parameter 'io' description in 'rtl92c_init_llt_table'

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
index 2890a495a23ec..8d2c6d8d32d93 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c
@@ -113,7 +113,7 @@ void rtl92c_read_chip_version(struct ieee80211_hw *hw)
 
 /**
  * writeLLT - LLT table write access
- * @io: io callback
+ * @hw: Pointer to the ieee80211_hw structure.
  * @address: LLT logical address.
  * @data: LLT data content
  *
@@ -145,11 +145,10 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
 
 /**
  * rtl92c_init_LLT_table - Init LLT table
- * @io: io callback
- * @boundary:
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @boundary: Page boundary.
  *
  * Realtek hardware access function.
- *
  */
 bool rtl92c_init_llt_table(struct ieee80211_hw *hw, u32 boundary)
 {
-- 
2.25.1

Re: [03/41] rtlwifi: rtl8192cu: mac: Fix some missing/ill-documented function parameters

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Function parameter or member 'hw' not described in 'rtl92c_llt_write'
>  drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Excess function parameter 'io' description in 'rtl92c_llt_write'
>  drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Function parameter or member 'hw' not described in 'rtl92c_init_llt_table'
>  drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Excess function parameter 'io' description in 'rtl92c_init_llt_table'
> 
> Cc: Ping-Ke Shih <pkshih@realtek.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

11 patches applied to wireless-drivers-next.git, thanks.

230f874e4d95 rtlwifi: rtl8192cu: mac: Fix some missing/ill-documented function parameters
906a1b4f81a3 rtlwifi: rtl8192cu: trx: Demote clear abuse of kernel-doc format
bb053d0251a2 rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
87b08d1ecb93 rtlwifi: phy: Remove set but unused variable 'bbvalue'
0c73dab72f53 rtlwifi: halbtc8821a1ant: Remove set but unused variable 'wifi_rssi_state'
0a43d993ee7e rtlwifi: rtl8723be: Remove set but unused variable 'lc_cal'
6c75eab0417b rtlwifi: rtl8188ee: Remove set but unused variable 'reg_ea4'
28f811876262 rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
44ec6d9df96d rtlwifi: rtl8723be: Remove set but unused variable 'cck_highpwr'
29c6099a3890 rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
398d816a64eb rtlwifi: rtl8821ae: Place braces around empty if() body

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-4-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 04/41] rsi_91x_usb_ops: Source file headers are not good candidates for kernel-doc

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format:  * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread'

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
index b1687d22f73f5..4ffcdde1acb1e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -1,4 +1,4 @@
-/**
+/*
  * Copyright (c) 2014 Redpine Signals Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
-- 
2.25.1

[PATCH 05/41] rtl8192cu: trx: Demote clear abuse of kernel-doc format

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum'

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
index 1ad0cf37f60bb..87f959d5d861d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
@@ -448,7 +448,7 @@ static void _rtl_fill_usb_tx_desc(__le32 *txdesc)
 	set_tx_desc_first_seg(txdesc, 1);
 }
 
-/**
+/*
  *	For HW recovery information
  */
 static void _rtl_tx_desc_checksum(__le32 *txdesc)
-- 
2.25.1

Re: [PATCH 05/41] rtl8192cu: trx: Demote clear abuse of kernel-doc format

[Larry Finger]

On 11/2/20 5:23 AM, Lee Jones wrote:
> Fixes the following W=1 kernel build warning(s):
> 
>   drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum'
> 
> Cc: Ping-Ke Shih <pkshih@realtek.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>   drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> index 1ad0cf37f60bb..87f959d5d861d 100644
> --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> @@ -448,7 +448,7 @@ static void _rtl_fill_usb_tx_desc(__le32 *txdesc)
>   	set_tx_desc_first_seg(txdesc, 1);
>   }
>   
> -/**
> +/*
>    *	For HW recovery information
>    */
>   static void _rtl_tx_desc_checksum(__le32 *txdesc)
> 

Did you check this patch with checkpatch.pl? I think you substituted one warning 
for another. The wireless-testing trees previously did not accept a bare "/*", 
which is why "/**" was present.

This particular instance should have
/* For HW recovery information */
as the comment.

Larry

Re: [PATCH 05/41] rtl8192cu: trx: Demote clear abuse of kernel-doc format

[Lee Jones]

On Mon, 02 Nov 2020, Larry Finger wrote:

> On 11/2/20 5:23 AM, Lee Jones wrote:
> > Fixes the following W=1 kernel build warning(s):
> > 
> >   drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum'
> > 
> > Cc: Ping-Ke Shih <pkshih@realtek.com>
> > Cc: Kalle Valo <kvalo@codeaurora.org>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: Jakub Kicinski <kuba@kernel.org>
> > Cc: Larry Finger <Larry.Finger@lwfinger.net>
> > Cc: linux-wireless@vger.kernel.org
> > Cc: netdev@vger.kernel.org
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> >   drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> > index 1ad0cf37f60bb..87f959d5d861d 100644
> > --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> > +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
> > @@ -448,7 +448,7 @@ static void _rtl_fill_usb_tx_desc(__le32 *txdesc)
> >   	set_tx_desc_first_seg(txdesc, 1);
> >   }
> > -/**
> > +/*
> >    *	For HW recovery information
> >    */
> >   static void _rtl_tx_desc_checksum(__le32 *txdesc)
> > 
> 
> Did you check this patch with checkpatch.pl?

Yes.

> I think you substituted one
> warning for another. The wireless-testing trees previously did not accept a
> bare "/*", which is why "/**" was present.

I don't see a problem.

$ git format-patch -n1 --stdout 8cd8b929e0458 | ./scripts/checkpatch.pl 
total: 0 errors, 0 warnings, 0 checks, 8 lines checked

"[PATCH 1/1] rtl8192cu: trx: Demote clear abuse of kernel-doc format"
  has no obvious style problems and is ready for submission.

> This particular instance should have
> /* For HW recovery information */
> as the comment.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 06/41] brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw'
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index f9ebb98b0e3c7..ce8c102df7b3e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -367,7 +367,7 @@ static int mmc_submit_one(struct mmc_data *md, struct mmc_request *mr,
  * @func: SDIO function
  * @write: direction flag
  * @addr: dongle memory address as source/destination
- * @pkt: skb pointer
+ * @pktlist: skb buffer head pointer
  *
  * This function takes the respbonsibility as the interface function to MMC
  * stack for block data access. It assumes that the skb passed down by the
-- 
2.25.1

Re: [PATCH 06/41] brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw'
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw'
> 
> Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
> Cc: Franky Lin <franky.lin@broadcom.com>
> Cc: Hante Meuleman <hante.meuleman@broadcom.com>
> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
> Cc: Wright Feng <wright.feng@cypress.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: brcm80211-dev-list.pdl@broadcom.com
> Cc: brcm80211-dev-list@cypress.com
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

3 patches applied to wireless-drivers-next.git, thanks.

6f0d044fc82e brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
05cefa989e8b brcmfmac: pcie: Provide description for missing function parameter 'devinfo'
9bd28c6607ba brcmfmac: fweh: Add missing description for 'gfp'

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-7-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 07/41] brcmfmac: pcie: Provide description for missing function parameter 'devinfo'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c:766: warning: Function parameter or member 'devinfo' not described in 'brcmf_pcie_bus_console_read'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 39381cbde89e6..1d3cc1c7c9c50 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -759,6 +759,7 @@ static void brcmf_pcie_bus_console_init(struct brcmf_pciedev_info *devinfo)
 /**
  * brcmf_pcie_bus_console_read - reads firmware messages
  *
+ * @devinfo: pointer to the device data structure
  * @error: specifies if error has occurred (prints messages unconditionally)
  */
 static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo,
-- 
2.25.1

[PATCH 08/41] iwlwifi: mvm: rs: Demote non-conformant function documentation headers

[Lee Jones]

Also add documentation for 'mvm'.

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:400: warning: cannot understand function prototype: 'const u16 expected_tpt_legacy[IWL_RATE_COUNT] = '
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'mvm' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'tbl' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'scale_index' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'attempts' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'successes' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:684: warning: Function parameter or member 'window' not described in '_rs_collect_tx_data'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2677: warning: duplicate section name 'NOTE'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2682: warning: Function parameter or member 'mvm' not described in 'rs_initialize_lq'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2682: warning: Function parameter or member 'sta' not described in 'rs_initialize_lq'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2682: warning: Function parameter or member 'lq_sta' not described in 'rs_initialize_lq'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:2682: warning: Function parameter or member 'band' not described in 'rs_initialize_lq'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:3761: warning: Function parameter or member 'mvm' not described in 'rs_program_fix_rate'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:3761: warning: Function parameter or member 'lq_sta' not described in 'rs_program_fix_rate'
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c:4213: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_tx_protection'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
index ed7382e7ea177..91b6541d579f5 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -386,7 +386,7 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
 			   const struct rs_rate *initial_rate);
 static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
 
-/**
+/*
  * The following tables contain the expected throughput metrics for all rates
  *
  *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
@@ -396,7 +396,6 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
  * CCK rates are only valid in legacy table and will only be used in G
  * (2.4 GHz) band.
  */
-
 static const u16 expected_tpt_legacy[IWL_RATE_COUNT] = {
 	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0
 };
@@ -670,7 +669,7 @@ static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
 	return 0;
 }
 
-/**
+/*
  * rs_collect_tx_data - Update the success/failure sliding window
  *
  * We keep a sliding window of the last 62 packets transmitted
@@ -2667,7 +2666,7 @@ void rs_update_last_rssi(struct iwl_mvm *mvm,
 	}
 }
 
-/**
+/*
  * rs_initialize_lq - Initialize a station's hardware rate table
  *
  * The uCode's station table contains a table of fallback rates
@@ -3756,7 +3755,7 @@ int rs_pretty_print_rate(char *buf, int bufsz, const u32 rate)
 }
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-/**
+/*
  * Program the device to use fixed rate for frame transmit
  * This is for debugging/testing only
  * once the device start use fixed rate, we need to reload the module
@@ -4211,6 +4210,7 @@ static int rs_drv_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
 
 /**
  * iwl_mvm_tx_protection - ask FW to enable RTS/CTS protection
+ * @mvm: The mvm component
  * @mvmsta: The station
  * @enable: Enable Tx protection?
  */
-- 
2.25.1

[PATCH 09/41] wl1251: cmd: Rename 'len' to 'buf_len' in the documentation

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Function parameter or member 'buf_len' not described in 'wl1251_cmd_test'
 drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Excess function parameter 'len' description in 'wl1251_cmd_test'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ti/wl1251/cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index 9547aea01b0fb..e1095b8de2bdc 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -63,7 +63,7 @@ int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
  *
  * @wl: wl struct
  * @buf: buffer containing the command, with all headers, must work with dma
- * @len: length of the buffer
+ * @buf_len: length of the buffer
  * @answer: is answer needed
  */
 int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
-- 
2.25.1

Re: [PATCH 09/41] wl1251: cmd: Rename 'len' to 'buf_len' in the documentation

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Function parameter or member 'buf_len' not described in 'wl1251_cmd_test'
>  drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Excess function parameter 'len' description in 'wl1251_cmd_test'
> 
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

5 patches applied to wireless-drivers-next.git, thanks.

641291eca88c wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
9afcf3223675 prism54: isl_ioctl: Fix one function header and demote another
8b8a6f8c3b50 wl3501_cs: Fix misspelling and provide missing documentation
5e43d496cd8e mwifiex: pcie: Remove a couple of unchecked 'ret's
136ab258d984 wlcore: spi: Demote a non-compliant function header, fix another

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-10-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 10/41] ath9k: ar9330_1p1_initvals: Remove unused const variable 'ar9331_common_tx_gain_offset1_1'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h:1013:18: warning: ‘ar9331_common_tx_gain_offset1_1’ defined but not used [-Wunused-const-variable=]

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
index 29479afbc4f10..3e783fc13553b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
@@ -1010,11 +1010,4 @@ static const u32 ar9331_common_rx_gain_1p1[][2] = {
 	{0x0000a1fc, 0x00000296},
 };
 
-static const u32 ar9331_common_tx_gain_offset1_1[][1] = {
-	{0x00000000},
-	{0x00000003},
-	{0x00000000},
-	{0x00000000},
-};
-
 #endif /* INITVALS_9330_1P1_H */
-- 
2.25.1

Re: [PATCH 10/41] ath9k: ar9330_1p1_initvals: Remove unused const variable 'ar9331_common_tx_gain_offset1_1'

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h:1013:18: warning: ‘ar9331_common_tx_gain_offset1_1’ defined but not used [-Wunused-const-variable=]
> 
> Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

6 patches applied to ath-next branch of ath.git, thanks.

3fc95aacc6fa ath9k: ar9330_1p1_initvals: Remove unused const variable 'ar9331_common_tx_gain_offset1_1'
30c2751b8458 ath9k: ar9340_initvals: Remove unused const variable 'ar9340Modes_ub124_tx_gain_table_1p0'
9190c64e4720 ath9k: ar9485_initvals: Remove unused const variable 'ar9485_fast_clock_1_1_baseband_postamble'
b5cafcb16f45 ath9k: ar9003_2p2_initvals: Remove unused const variables
8cc107b57109 ath9k: ar5008_phy: Demote half completed function headers
cd64cae3efd4 ath9k: dynack: Demote non-compliant function header

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-11-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 11/41] ath9k: ar9340_initvals: Remove unused const variable 'ar9340Modes_ub124_tx_gain_table_1p0'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/ar9340_initvals.h:624:18: warning: ‘ar9340Modes_ub124_tx_gain_table_1p0’ defined but not used [-Wunused-const-variable=]

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../net/wireless/ath/ath9k/ar9340_initvals.h  | 101 ------------------
 1 file changed, 101 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
index 2eb163fc1c18f..3da4ea564148c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -621,107 +621,6 @@ static const u32 ar9340Modes_high_ob_db_tx_gain_table_1p0[][5] = {
 	{0x00016448, 0x8e481666, 0x8e481666, 0x8e481266, 0x8e481266},
 };
 
-static const u32 ar9340Modes_ub124_tx_gain_table_1p0[][5] = {
-	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
-	{0x00009820, 0x206a022e, 0x206a022e, 0x206a00ae, 0x206a00ae},
-	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
-	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec82d2e, 0x7ec82d2e},
-	{0x0000a2dc, 0xfef5d402, 0xfef5d402, 0xfdab5b52, 0xfdab5b52},
-	{0x0000a2e0, 0xfe896600, 0xfe896600, 0xfd339c84, 0xfd339c84},
-	{0x0000a2e4, 0xff01f800, 0xff01f800, 0xfec3e000, 0xfec3e000},
-	{0x0000a2e8, 0xfffe0000, 0xfffe0000, 0xfffc0000, 0xfffc0000},
-	{0x0000a410, 0x000050d8, 0x000050d8, 0x000050d9, 0x000050d9},
-	{0x0000a500, 0x00002220, 0x00002220, 0x00000000, 0x00000000},
-	{0x0000a504, 0x04002222, 0x04002222, 0x04000002, 0x04000002},
-	{0x0000a508, 0x09002421, 0x09002421, 0x08000004, 0x08000004},
-	{0x0000a50c, 0x0d002621, 0x0d002621, 0x0b000200, 0x0b000200},
-	{0x0000a510, 0x13004620, 0x13004620, 0x0f000202, 0x0f000202},
-	{0x0000a514, 0x19004a20, 0x19004a20, 0x11000400, 0x11000400},
-	{0x0000a518, 0x1d004e20, 0x1d004e20, 0x15000402, 0x15000402},
-	{0x0000a51c, 0x21005420, 0x21005420, 0x19000404, 0x19000404},
-	{0x0000a520, 0x26005e20, 0x26005e20, 0x1b000603, 0x1b000603},
-	{0x0000a524, 0x2b005e40, 0x2b005e40, 0x1f000a02, 0x1f000a02},
-	{0x0000a528, 0x2f005e42, 0x2f005e42, 0x23000a04, 0x23000a04},
-	{0x0000a52c, 0x33005e44, 0x33005e44, 0x26000a20, 0x26000a20},
-	{0x0000a530, 0x38005e65, 0x38005e65, 0x2a000e20, 0x2a000e20},
-	{0x0000a534, 0x3c005e69, 0x3c005e69, 0x2e000e22, 0x2e000e22},
-	{0x0000a538, 0x40005e6b, 0x40005e6b, 0x31000e24, 0x31000e24},
-	{0x0000a53c, 0x44005e6d, 0x44005e6d, 0x34001640, 0x34001640},
-	{0x0000a540, 0x49005e72, 0x49005e72, 0x38001660, 0x38001660},
-	{0x0000a544, 0x4e005eb2, 0x4e005eb2, 0x3b001861, 0x3b001861},
-	{0x0000a548, 0x53005f12, 0x53005f12, 0x3e001a81, 0x3e001a81},
-	{0x0000a54c, 0x59025eb5, 0x59025eb5, 0x42001a83, 0x42001a83},
-	{0x0000a550, 0x5e025f12, 0x5e025f12, 0x44001c84, 0x44001c84},
-	{0x0000a554, 0x61027f12, 0x61027f12, 0x48001ce3, 0x48001ce3},
-	{0x0000a558, 0x6702bf12, 0x6702bf12, 0x4c001ce5, 0x4c001ce5},
-	{0x0000a55c, 0x6b02bf14, 0x6b02bf14, 0x50001ce9, 0x50001ce9},
-	{0x0000a560, 0x6f02bf16, 0x6f02bf16, 0x54001ceb, 0x54001ceb},
-	{0x0000a564, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a568, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a56c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a570, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a574, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a578, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a57c, 0x6f02bf16, 0x6f02bf16, 0x56001eec, 0x56001eec},
-	{0x0000a580, 0x00802220, 0x00802220, 0x00800000, 0x00800000},
-	{0x0000a584, 0x04802222, 0x04802222, 0x04800002, 0x04800002},
-	{0x0000a588, 0x09802421, 0x09802421, 0x08800004, 0x08800004},
-	{0x0000a58c, 0x0d802621, 0x0d802621, 0x0b800200, 0x0b800200},
-	{0x0000a590, 0x13804620, 0x13804620, 0x0f800202, 0x0f800202},
-	{0x0000a594, 0x19804a20, 0x19804a20, 0x11800400, 0x11800400},
-	{0x0000a598, 0x1d804e20, 0x1d804e20, 0x15800402, 0x15800402},
-	{0x0000a59c, 0x21805420, 0x21805420, 0x19800404, 0x19800404},
-	{0x0000a5a0, 0x26805e20, 0x26805e20, 0x1b800603, 0x1b800603},
-	{0x0000a5a4, 0x2b805e40, 0x2b805e40, 0x1f800a02, 0x1f800a02},
-	{0x0000a5a8, 0x2f805e42, 0x2f805e42, 0x23800a04, 0x23800a04},
-	{0x0000a5ac, 0x33805e44, 0x33805e44, 0x26800a20, 0x26800a20},
-	{0x0000a5b0, 0x38805e65, 0x38805e65, 0x2a800e20, 0x2a800e20},
-	{0x0000a5b4, 0x3c805e69, 0x3c805e69, 0x2e800e22, 0x2e800e22},
-	{0x0000a5b8, 0x40805e6b, 0x40805e6b, 0x31800e24, 0x31800e24},
-	{0x0000a5bc, 0x44805e6d, 0x44805e6d, 0x34801640, 0x34801640},
-	{0x0000a5c0, 0x49805e72, 0x49805e72, 0x38801660, 0x38801660},
-	{0x0000a5c4, 0x4e805eb2, 0x4e805eb2, 0x3b801861, 0x3b801861},
-	{0x0000a5c8, 0x53805f12, 0x53805f12, 0x3e801a81, 0x3e801a81},
-	{0x0000a5cc, 0x59825eb2, 0x59825eb2, 0x42801a83, 0x42801a83},
-	{0x0000a5d0, 0x5e825f12, 0x5e825f12, 0x44801c84, 0x44801c84},
-	{0x0000a5d4, 0x61827f12, 0x61827f12, 0x48801ce3, 0x48801ce3},
-	{0x0000a5d8, 0x6782bf12, 0x6782bf12, 0x4c801ce5, 0x4c801ce5},
-	{0x0000a5dc, 0x6b82bf14, 0x6b82bf14, 0x50801ce9, 0x50801ce9},
-	{0x0000a5e0, 0x6f82bf16, 0x6f82bf16, 0x54801ceb, 0x54801ceb},
-	{0x0000a5e4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5e8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5ec, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f0, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f4, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5f8, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x0000a5fc, 0x6f82bf16, 0x6f82bf16, 0x56801eec, 0x56801eec},
-	{0x00016044, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016048, 0x8e480086, 0x8e480086, 0x8e480086, 0x8e480086},
-	{0x00016444, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4, 0x03b6d2e4},
-	{0x00016448, 0x8e480086, 0x8e480086, 0x8e480086, 0x8e480086},
-	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a610, 0x00804000, 0x00804000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x00804201, 0x00804201, 0x01404000, 0x01404000},
-	{0x0000a618, 0x0280c802, 0x0280c802, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x0280ca03, 0x0280ca03, 0x02008501, 0x02008501},
-	{0x0000a620, 0x04c15104, 0x04c15104, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x04c15305, 0x04c15305, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x04c15305, 0x04c15305, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a630, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a634, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a638, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x04c15305, 0x04c15305, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0xfef5d402, 0xfef5d402, 0xfdab5b52, 0xfdab5b52},
-	{0x0000b2e0, 0xfe896600, 0xfe896600, 0xfd339c84, 0xfd339c84},
-	{0x0000b2e4, 0xff01f800, 0xff01f800, 0xfec3e000, 0xfec3e000},
-	{0x0000b2e8, 0xfffe0000, 0xfffe0000, 0xfffc0000, 0xfffc0000},
-};
-
 static const u32 ar9340Modes_low_ob_db_tx_gain_table_1p0[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03aaa352, 0x03aaa352},
-- 
2.25.1

[PATCH 12/41] ath9k: ar9485_initvals: Remove unused const variable 'ar9485_fast_clock_1_1_baseband_postamble'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/ar9485_initvals.h:1009:18: warning: ‘ar9485_fast_clock_1_1_baseband_postamble’ defined but not used [-Wunused-const-variable=]

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index bdf6f107f6f1e..4afe52c0456e9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1006,13 +1006,6 @@ static const u32 ar9485_1_1_soc_preamble[][2] = {
 	{0x00007048, 0x00000002},
 };
 
-static const u32 ar9485_fast_clock_1_1_baseband_postamble[][3] = {
-	/* Addr      5G_HT20     5G_HT40   */
-	{0x00009e00, 0x03721821, 0x03721821},
-	{0x0000a230, 0x0000400b, 0x00004016},
-	{0x0000a254, 0x00000898, 0x00001130},
-};
-
 static const u32 ar9485_1_1_baseband_postamble[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
 	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
-- 
2.25.1

[PATCH 13/41] ath9k: ar9003_2p2_initvals: Remove unused const variables

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1734:18: warning: ‘ar9300PciePhy_clkreq_disable_L1_2p2’ defined but not used [-Wunused-const-variable=]
 drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h:1727:18: warning: ‘ar9300PciePhy_clkreq_enable_L1_2p2’ defined but not used [-Wunused-const-variable=]

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index c07866a2fdf96..16d5c0c5e2a8d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -1724,20 +1724,6 @@ static const u32 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2[][2] = {
 	{0x00004044, 0x00000000},
 };
 
-static const u32 ar9300PciePhy_clkreq_enable_L1_2p2[][2] = {
-	/* Addr      allmodes  */
-	{0x00004040, 0x0825365e},
-	{0x00004040, 0x0008003b},
-	{0x00004044, 0x00000000},
-};
-
-static const u32 ar9300PciePhy_clkreq_disable_L1_2p2[][2] = {
-	/* Addr      allmodes  */
-	{0x00004040, 0x0821365e},
-	{0x00004040, 0x0008003b},
-	{0x00004044, 0x00000000},
-};
-
 static const u32 ar9300_2p2_baseband_core_txfir_coeff_japan_2484[][2] = {
 	/* Addr      allmodes  */
 	{0x0000a398, 0x00000000},
-- 
2.25.1

[PATCH 14/41] prism54: isl_ioctl: Fix one function header and demote another

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 from drivers/net/wireless/intersil/prism54/isl_ioctl.c:22:
 inlined from ‘prism54_get_name’ at drivers/net/wireless/intersil/prism54/isl_ioctl.c:283:2:
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Function parameter or member 'priv' not described in 'prism54_mib_mode_helper'
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Excess function parameter 'mib' description in 'prism54_mib_mode_helper'
 drivers/net/wireless/intersil/prism54/isl_ioctl.c:127: warning: Function parameter or member 'priv' not described in 'prism54_mib_init'

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aurelien Alleaume <slts@free.fr>
Cc: Valerio Riedel <hvr@gnu.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intersil/prism54/isl_ioctl.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intersil/prism54/isl_ioctl.c b/drivers/net/wireless/intersil/prism54/isl_ioctl.c
index 2076f449b6e25..5e5ceafe098b9 100644
--- a/drivers/net/wireless/intersil/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/intersil/prism54/isl_ioctl.c
@@ -54,7 +54,7 @@ static const unsigned char scan_rate_list[] = { 2, 4, 11, 22,
 
 /**
  * prism54_mib_mode_helper - MIB change mode helper function
- * @mib: the &struct islpci_mib object to modify
+ * @priv: the &struct islpci_private object to modify
  * @iw_mode: new mode (%IW_MODE_*)
  *
  *  This is a helper function, hence it does not lock. Make sure
@@ -114,14 +114,13 @@ prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode)
 	return 0;
 }
 
-/**
+/*
  * prism54_mib_init - fill MIB cache with defaults
  *
  *  this function initializes the struct given as @mib with defaults,
  *  of which many are retrieved from the global module parameter
  *  variables.
  */
-
 void
 prism54_mib_init(islpci_private *priv)
 {
-- 
2.25.1

[PATCH 15/41] iwlwifi: iwl-eeprom-read: Demote one nonconformant function header

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c:347: warning: Function parameter or member 'trans' not described in 'iwl_read_eeprom'
 drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c:347: warning: Function parameter or member 'eeprom' not described in 'iwl_read_eeprom'
 drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c:347: warning: Function parameter or member 'eeprom_size' not described in 'iwl_read_eeprom'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c
index ad6dc4497437e..1b2d9fd82a3de 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c
@@ -335,7 +335,7 @@ static int iwl_find_otp_image(struct iwl_trans *trans,
 	return -EINVAL;
 }
 
-/**
+/*
  * iwl_read_eeprom - read EEPROM contents
  *
  * Load the EEPROM contents from adapter and return it
-- 
2.25.1

[PATCH 16/41] iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's header

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c:340: warning: cannot understand function prototype: 'struct iwl_eeprom_enhanced_txpwr '

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../net/wireless/intel/iwlwifi/iwl-eeprom-parse.c    | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
index cf7e2a9232e52..f29d5758c8dff 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
@@ -324,15 +324,15 @@ enum iwl_eeprom_enhanced_txpwr_flags {
 };
 
 /**
- * iwl_eeprom_enhanced_txpwr structure
+ * struct iwl_eeprom_enhanced_txpwr
  * @flags: entry flags
  * @channel: channel number
- * @chain_a_max_pwr: chain a max power in 1/2 dBm
- * @chain_b_max_pwr: chain b max power in 1/2 dBm
- * @chain_c_max_pwr: chain c max power in 1/2 dBm
+ * @chain_a_max: chain a max power in 1/2 dBm
+ * @chain_b_max: chain b max power in 1/2 dBm
+ * @chain_c_max: chain c max power in 1/2 dBm
  * @delta_20_in_40: 20-in-40 deltas (hi/lo)
- * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
- * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
+ * @mimo2_max: mimo2 max power in 1/2 dBm
+ * @mimo3_max: mimo3 max power in 1/2 dBm
  *
  * This structure presents the enhanced regulatory tx power limit layout
  * in an EEPROM image.
-- 
2.25.1

[PATCH 17/41] intersil: hostap_hw: Prevent incompatible function type cast

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intersil/hostap/hostap_hw.c: In function ‘prism2_init_local_data’:
 drivers/net/wireless/intersil/hostap/hostap_hw.c:3173:48: warning: cast between incompatible function types from ‘void (*)(struct tasklet_struct *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]
 drivers/net/wireless/intersil/hostap/hostap_hw.c:3175:2: note: in expansion of macro ‘HOSTAP_TASKLET_INIT’

 NB: Repeats lots of times - snipped for brevity

Cc: Jouni Malinen <j@w1.fi>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../net/wireless/intersil/hostap/hostap_hw.c  | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/intersil/hostap/hostap_hw.c b/drivers/net/wireless/intersil/hostap/hostap_hw.c
index 22cfb64526448..c877b677505ed 100644
--- a/drivers/net/wireless/intersil/hostap/hostap_hw.c
+++ b/drivers/net/wireless/intersil/hostap/hostap_hw.c
@@ -36,6 +36,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/if_arp.h>
+#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/random.h>
 #include <linux/wait.h>
@@ -3169,22 +3170,16 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx,
 
 	/* Initialize tasklets for handling hardware IRQ related operations
 	 * outside hw IRQ handler */
-#define HOSTAP_TASKLET_INIT(q, f, d) \
-do { memset((q), 0, sizeof(*(q))); (q)->func = (void(*)(unsigned long))(f); } \
-while (0)
-	HOSTAP_TASKLET_INIT(&local->bap_tasklet, hostap_bap_tasklet,
-			    (unsigned long) local);
-
-	HOSTAP_TASKLET_INIT(&local->info_tasklet, hostap_info_tasklet,
-			    (unsigned long) local);
+
+	tasklet_setup(&local->bap_tasklet, hostap_bap_tasklet);
+
+	tasklet_setup(&local->info_tasklet, hostap_info_tasklet);
 	hostap_info_init(local);
 
-	HOSTAP_TASKLET_INIT(&local->rx_tasklet,
-			    hostap_rx_tasklet, (unsigned long) local);
+	tasklet_setup(&local->rx_tasklet, hostap_rx_tasklet);
 	skb_queue_head_init(&local->rx_list);
 
-	HOSTAP_TASKLET_INIT(&local->sta_tx_exc_tasklet,
-			    hostap_sta_tx_exc_tasklet, (unsigned long) local);
+	tasklet_setup(&local->sta_tx_exc_tasklet, hostap_sta_tx_exc_tasklet);
 	skb_queue_head_init(&local->sta_tx_exc_list);
 
 	INIT_LIST_HEAD(&local->cmd_queue);
-- 
2.25.1

Re: [PATCH 17/41] intersil: hostap_hw: Prevent incompatible function type cast

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/intersil/hostap/hostap_hw.c: In function ‘prism2_init_local_data’:
>  drivers/net/wireless/intersil/hostap/hostap_hw.c:3173:48: warning: cast between incompatible function types from ‘void (*)(struct tasklet_struct *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]
>  drivers/net/wireless/intersil/hostap/hostap_hw.c:3175:2: note: in expansion of macro ‘HOSTAP_TASKLET_INIT’
> 
>  NB: Repeats lots of times - snipped for brevity
> 
> Cc: Jouni Malinen <j@w1.fi>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Already fixed in wireless-drivers-next

Recorded preimage for 'drivers/net/wireless/intersil/hostap/hostap_hw.c'
error: Failed to merge in the changes.
Applying: intersil: hostap_hw: Prevent incompatible function type cast
Using index info to reconstruct a base tree...
M	drivers/net/wireless/intersil/hostap/hostap_hw.c
Falling back to patching base and 3-way merge...
Auto-merging drivers/net/wireless/intersil/hostap/hostap_hw.c
CONFLICT (content): Merge conflict in drivers/net/wireless/intersil/hostap/hostap_hw.c
Patch failed at 0001 intersil: hostap_hw: Prevent incompatible function type cast
The copy of the patch that failed is found in: .git/rebase-apply/patch

Patch set to Superseded.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-18-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 18/41] brcm80211: fweh: Add missing description for 'gfp'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:394: warning: Function parameter or member 'gfp' not described in 'brcmf_fweh_process_event'

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 430d2cca98b33..bc3f4e4edcdf9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -384,6 +384,7 @@ int brcmf_fweh_activate_events(struct brcmf_if *ifp)
  * @drvr: driver information object.
  * @event_packet: event packet to process.
  * @packet_len: length of the packet
+ * @gfp: memory allocation flags.
  *
  * If the packet buffer contains a firmware event message it will
  * dispatch the event to a registered handler (using worker).
-- 
2.25.1

[PATCH 19/41] ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' param

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/regd.c:378: warning: Function parameter or member 'reg' not described in 'ath_reg_apply_ir_flags'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/regd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index bee9110b91f38..b2400e2417a55 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -360,6 +360,7 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
 /**
  * ath_reg_apply_ir_flags()
  * @wiphy: the wiphy to use
+ * @reg: regulatory structure - used for country selection
  * @initiator: the regulatory hint initiator
  *
  * If no country IE has been received always enable passive scan
-- 
2.25.1

Re: [PATCH 19/41] ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' param

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/ath/regd.c:378: warning: Function parameter or member 'reg' not described in 'ath_reg_apply_ir_flags'
> 
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

3 patches applied to ath-next branch of ath.git, thanks.

aed7ee049a3e ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' param
206cd5800d8c ath: dfs_pattern_detector: Fix some function kernel-doc headers
748d250777e6 ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-20-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 20/41] ath9k: ar5008_phy: Demote half completed function headers

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'rfBuf' not described in 'ar5008_hw_phy_modify_rx_buffer'
 drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'reg32' not described in 'ar5008_hw_phy_modify_rx_buffer'
 drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'numBits' not described in 'ar5008_hw_phy_modify_rx_buffer'
 drivers/net/wireless/ath/ath9k/ar5008_phy.c:119: warning: Function parameter or member 'firstBit' not described in 'ar5008_hw_phy_modify_rx_buffer'

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/ath9k/ar5008_phy.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index 2fa30834a88db..6610d76131fa8 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -102,13 +102,8 @@ static void ar5008_write_bank6(struct ath_hw *ah, unsigned int *writecnt)
 	REGWRITE_BUFFER_FLUSH(ah);
 }
 
-/**
+/*
  * ar5008_hw_phy_modify_rx_buffer() - perform analog swizzling of parameters
- * @rfbuf:
- * @reg32:
- * @numBits:
- * @firstBit:
- * @column:
  *
  * Performs analog "swizzling" of parameters into their location.
  * Used on external AR2133/AR5133 radios.
@@ -198,10 +193,8 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 	ar5008_write_bank6(ah, &reg_writes);
 }
 
-/**
+/*
  * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
- * @ah: atheros hardware structure
- * @chan:
  *
  * For the external AR2133/AR5133 radios, takes the MHz channel value and set
  * the channel value. Assumes writes enabled to analog bus and bank6 register
@@ -430,10 +423,8 @@ void ar5008_hw_cmn_spur_mitigate(struct ath_hw *ah,
 	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
 }
 
-/**
+/*
  * ar5008_hw_spur_mitigate - convert baseband spur frequency for external radios
- * @ah: atheros hardware structure
- * @chan:
  *
  * For non single-chip solutions. Converts to baseband spur frequency given the
  * input channel frequency and compute register settings below.
-- 
2.25.1

[PATCH 21/41] ath: dfs_pattern_detector: Fix some function kernel-doc headers

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/dfs_pattern_detector.c:34: warning: Function parameter or member 'region' not described in 'radar_types'
 drivers/net/wireless/ath/dfs_pattern_detector.c:141: warning: Function parameter or member 'region' not described in 'get_dfs_domain_radar_types'
 drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'dpd' not described in 'channel_detector_get'
 drivers/net/wireless/ath/dfs_pattern_detector.c:239: warning: Function parameter or member 'freq' not described in 'channel_detector_get'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/dfs_pattern_detector.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index 0813473793df1..80390495ea250 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -23,7 +23,7 @@
 
 /**
  * struct radar_types - contains array of patterns defined for one DFS domain
- * @domain: DFS regulatory domain
+ * @region: regulatory DFS region
  * @num_radar_types: number of radar types to follow
  * @radar_types: radar types array
  */
@@ -133,8 +133,9 @@ static const struct radar_types *dfs_domains[] = {
 
 /**
  * get_dfs_domain_radar_types() - get radar types for a given DFS domain
- * @param domain DFS domain
- * @return radar_types ptr on success, NULL if DFS domain is not supported
+ * @region: regulatory DFS region
+ *
+ * Return value: radar_types ptr on success, NULL if DFS domain is not supported
  */
 static const struct radar_types *
 get_dfs_domain_radar_types(enum nl80211_dfs_regions region)
@@ -227,9 +228,10 @@ channel_detector_create(struct dfs_pattern_detector *dpd, u16 freq)
 
 /**
  * channel_detector_get() - get channel detector for given frequency
- * @param dpd instance pointer
- * @param freq frequency in MHz
- * @return pointer to channel detector on success, NULL otherwise
+ * @dpd: DPD instance pointer
+ * @freq: freq frequency in MHz
+ *
+ * Return value: pointer to channel detector on success, NULL otherwise
  *
  * Return existing channel detector for the given frequency or return a
  * newly create one.
-- 
2.25.1

[PATCH 22/41] ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers

[Lee Jones]

There are only a couple of these and none of them are conformant.

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/dfs_pri_detector.c:39: warning: Function parameter or member 'head' not described in 'pulse_elem'
 drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'val' not described in 'pde_get_multiple'
 drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'fraction' not described in 'pde_get_multiple'
 drivers/net/wireless/ath/dfs_pri_detector.c:46: warning: Function parameter or member 'tolerance' not described in 'pde_get_multiple'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/dfs_pri_detector.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/dfs_pri_detector.c b/drivers/net/wireless/ath/dfs_pri_detector.c
index 05b0464c6b92c..d07c454c9c00d 100644
--- a/drivers/net/wireless/ath/dfs_pri_detector.c
+++ b/drivers/net/wireless/ath/dfs_pri_detector.c
@@ -29,18 +29,17 @@ struct ath_dfs_pool_stats global_dfs_pool_stats = {};
 	(MIN + PRI_TOLERANCE == MAX - PRI_TOLERANCE ? \
 	MIN + PRI_TOLERANCE : RUNTIME)
 
-/**
+/*
  * struct pulse_elem - elements in pulse queue
- * @ts: time stamp in usecs
  */
 struct pulse_elem {
 	struct list_head head;
 	u64 ts;
 };
 
-/**
+/*
  * pde_get_multiple() - get number of multiples considering a given tolerance
- * @return factor if abs(val - factor*fraction) <= tolerance, 0 otherwise
+ * Return value: factor if abs(val - factor*fraction) <= tolerance, 0 otherwise
  */
 static u32 pde_get_multiple(u32 val, u32 fraction, u32 tolerance)
 {
@@ -70,7 +69,7 @@ static u32 pde_get_multiple(u32 val, u32 fraction, u32 tolerance)
 	return factor;
 }
 
-/**
+/*
  * DOC: Singleton Pulse and Sequence Pools
  *
  * Instances of pri_sequence and pulse_elem are kept in singleton pools to
-- 
2.25.1

[PATCH 23/41] iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c:97: warning: Function parameter or member 'trans' not described in 'iwl_phy_db'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c
index ae83cfdb750e6..c9ce270ceee07 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-phy-db.c
@@ -79,11 +79,11 @@ struct iwl_phy_db_entry {
  *
  * @cfg: phy configuration.
  * @calib_nch: non channel specific calibration data.
- * @calib_ch: channel specific calibration data.
  * @n_group_papd: number of entries in papd channel group.
  * @calib_ch_group_papd: calibration data related to papd channel group.
  * @n_group_txp: number of entries in tx power channel group.
  * @calib_ch_group_txp: calibration data related to tx power chanel group.
+ * @trans: transport layer
  */
 struct iwl_phy_db {
 	struct iwl_phy_db_entry	cfg;
-- 
2.25.1

[PATCH 24/41] wl3501_cs: Fix misspelling and provide missing documentation

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/net/wireless/wl3501_cs.c:57:
 drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'reg_domain' not described in 'iw_valid_channel'
 drivers/net/wireless/wl3501_cs.c:143: warning: Excess function parameter 'reg_comain' description in 'iw_valid_channel'
 drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'data' not described in 'wl3501_send_pkt'
 drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'len' not described in 'wl3501_send_pkt'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Fox Chen <mhchen@golf.ccl.itri.org.tw>
Cc: de Melo <acme@conectiva.com.br>
Cc: Gustavo Niemeyer <niemeyer@conectiva.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/wl3501_cs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 026e88b80bfc4..8ca5789c7b378 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -134,7 +134,7 @@ static const struct {
 
 /**
  * iw_valid_channel - validate channel in regulatory domain
- * @reg_comain: regulatory domain
+ * @reg_domain: regulatory domain
  * @channel: channel to validate
  *
  * Returns 0 if invalid in the specified regulatory domain, non-zero if valid.
@@ -458,11 +458,9 @@ static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend)
 /**
  * wl3501_send_pkt - Send a packet.
  * @this: Card
- *
- * Send a packet.
- *
- * data = Ethernet raw frame.  (e.g. data[0] - data[5] is Dest MAC Addr,
+ * @data: Ethernet raw frame.  (e.g. data[0] - data[5] is Dest MAC Addr,
  *                                   data[6] - data[11] is Src MAC Addr)
+ * @len: Packet length
  * Ref: IEEE 802.11
  */
 static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
-- 
2.25.1

[PATCH 25/41] rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_wifi_idle_process’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_sco’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2767:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2810:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2855:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp_pan_hs’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2929:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2976:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_hs’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3066:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_hid’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3121:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp_pan_edr’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3185:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3244:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../rtlwifi/btcoexist/halbtc8723b2ant.c       | 48 +++++++++----------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
index fb57cc8b2e471..7a71f063015ab 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c
@@ -1628,17 +1628,17 @@ static void btc8723b2ant_action_wifi_link_process(struct btc_coexist
 static bool btc8723b2ant_action_wifi_idle_process(struct btc_coexist *btcoexist)
 {
 	struct rtl_priv *rtlpriv = btcoexist->adapter;
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1;
 	u8 ap_num = 0;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 		 coex_dm->switch_thres_offset - coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
 	      coex_dm->switch_thres_offset - coex_dm->switch_thres_offset;
-	bt_rssi_state = btc8723b2ant_bt_rssi_state(btcoexist, 2, tmp, 0);
+	btc8723b2ant_bt_rssi_state(btcoexist, 2, tmp, 0);
 
 	btcoexist->btc_get(btcoexist, BTC_GET_U1_AP_NUM, &ap_num);
 
@@ -2764,10 +2764,10 @@ static void btc8723b2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
 /* SCO only or SCO+PAN(HS) */
 static void btc8723b2ant_action_sco(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, bt_rssi_state;
+	u8 bt_rssi_state;
 	u32 wifi_bw;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	bt_rssi_state = btc8723b2ant_bt_rssi_state(
 		btcoexist, 2, BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
 					       coex_dm->switch_thres_offset,
@@ -2807,12 +2807,12 @@ static void btc8723b2ant_action_sco(struct btc_coexist *btcoexist)
 
 static void btc8723b2ant_action_hid(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, bt_rssi_state;
+	u8 bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	bt_rssi_state = btc8723b2ant_bt_rssi_state(btcoexist, 2, tmp, 0);
 
 	btcoexist->btc_set_rf_reg(btcoexist, BTC_RF_A, 0x1, 0xfffff, 0x0);
@@ -2852,13 +2852,13 @@ static void btc8723b2ant_action_hid(struct btc_coexist *btcoexist)
 /* A2DP only / PAN(EDR) only/ A2DP+PAN(HS) */
 static void btc8723b2ant_action_a2dp(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 ap_num = 0;
 	u8 tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2, 40, 0);
 	bt_rssi_state = btc8723b2ant_bt_rssi_state(btcoexist, 2, tmp, 0);
 
@@ -2926,12 +2926,12 @@ static void btc8723b2ant_action_a2dp(struct btc_coexist *btcoexist)
 
 static void btc8723b2ant_action_a2dp_pan_hs(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
@@ -2973,12 +2973,12 @@ static void btc8723b2ant_action_a2dp_pan_hs(struct btc_coexist *btcoexist)
 
 static void btc8723b2ant_action_pan_edr(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
@@ -3025,13 +3025,13 @@ static void btc8723b2ant_action_pan_edr(struct btc_coexist *btcoexist)
 /* PAN(HS) only */
 static void btc8723b2ant_action_pan_hs(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
-	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
@@ -3063,12 +3063,12 @@ static void btc8723b2ant_action_pan_hs(struct btc_coexist *btcoexist)
 /* PAN(EDR) + A2DP */
 static void btc8723b2ant_action_pan_edr_a2dp(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
@@ -3118,12 +3118,12 @@ static void btc8723b2ant_action_pan_edr_a2dp(struct btc_coexist *btcoexist)
 
 static void btc8723b2ant_action_pan_edr_hid(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
@@ -3182,12 +3182,12 @@ static void btc8723b2ant_action_pan_edr_hid(struct btc_coexist *btcoexist)
 /* HID + A2DP + PAN(EDR) */
 static void btc8723b2ant_action_hid_a2dp_pan_edr(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
@@ -3241,13 +3241,13 @@ static void btc8723b2ant_action_hid_a2dp_pan_edr(struct btc_coexist *btcoexist)
 
 static void btc8723b2ant_action_hid_a2dp(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1, bt_rssi_state;
 	u32 wifi_bw;
 	u8 ap_num = 0;
 	u8 tmp = BT_8723B_2ANT_WIFI_RSSI_COEXSWITCH_THRES -
 			coex_dm->switch_thres_offset;
 
-	wifi_rssi_state = btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8723b2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8723b2ant_wifi_rssi_state(btcoexist, 1, 2,
 							tmp, 0);
 	tmp = BT_8723B_2ANT_BT_RSSI_COEXSWITCH_THRES -
-- 
2.25.1

[PATCH 26/41] rtlwifi: phy: Remove set but unused variable 'bbvalue'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function ‘_rtl8723e_phy_iq_calibrate’:
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1150:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
index fa0eed434d4f6..fe9b407dc2aff 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
@@ -1147,10 +1147,8 @@ static void _rtl8723e_phy_iq_calibrate(struct ieee80211_hw *hw,
 
 	const u32 retrycount = 2;
 
-	u32 bbvalue;
-
 	if (t == 0) {
-		bbvalue = rtl_get_bbreg(hw, 0x800, MASKDWORD);
+		rtl_get_bbreg(hw, 0x800, MASKDWORD);
 
 		rtl8723_save_adda_registers(hw, adda_reg,
 					    rtlphy->adda_backup, 16);
-- 
2.25.1

[PATCH 27/41] rtlwifi: halbtc8821a1ant: Remove set but unused variable 'wifi_rssi_state'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c: In function ‘btc8821a1ant_run_coexist_mechanism’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1904:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c  | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c
index 9f5e85be97645..a18dffc8753a9 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c
@@ -1901,7 +1901,6 @@ static void btc8821a1ant_run_coexist_mechanism(struct btc_coexist *btcoexist)
 	bool increase_scan_dev_num = false;
 	bool bt_ctrl_agg_buf_size = false;
 	u8 agg_buf_size = 5;
-	u8 wifi_rssi_state = BTC_RSSI_STATE_HIGH;
 	u32 wifi_link_status = 0;
 	u32 num_of_wifi_link = 0;
 	bool wifi_under_5g = false;
@@ -1962,8 +1961,7 @@ static void btc8821a1ant_run_coexist_mechanism(struct btc_coexist *btcoexist)
 		btc8821a1ant_limited_tx(btcoexist, NORMAL_EXEC, 0, 0, 0, 0);
 	} else {
 		if (wifi_connected) {
-			wifi_rssi_state =
-				btc8821a1ant_wifi_rssi_state(btcoexist, 1, 2,
+			btc8821a1ant_wifi_rssi_state(btcoexist, 1, 2,
 							     30, 0);
 			btc8821a1ant_limited_tx(btcoexist,
 						NORMAL_EXEC, 1, 1,
-- 
2.25.1

[PATCH 28/41] rtl8723be: phy: Remove set but unused variable 'lc_cal'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c: In function ‘_rtl8723be_phy_lc_calibrate’:
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2181:36: warning: variable ‘lc_cal’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
index f09f55b0468a4..2b9313cb93dbd 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
@@ -2178,7 +2178,7 @@ static u8 _get_right_chnl_place_for_iqk(u8 chnl)
 static void _rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
 {
 	u8 tmpreg;
-	u32 rf_a_mode = 0, rf_b_mode = 0, lc_cal;
+	u32 rf_a_mode = 0, rf_b_mode = 0;
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
 	tmpreg = rtl_read_byte(rtlpriv, 0xd03);
@@ -2202,7 +2202,7 @@ static void _rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
 			rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASK12BITS,
 				      (rf_b_mode & 0x8FFFF) | 0x10000);
 	}
-	lc_cal = rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
+	rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
 
 	rtl_set_rfreg(hw, RF90_PATH_A, 0xb0, RFREG_OFFSET_MASK, 0xdfbe0);
 	rtl_set_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS, 0x8c0a);
-- 
2.25.1

[PATCH 29/41] rtl8188ee: phy: Remove set but unused variable 'reg_ea4'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function ‘_rtl88e_phy_path_a_iqk’:
 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1351:33: warning: variable ‘reg_ea4’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
index 9be032e8ec95b..12d0b3a87af7c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c
@@ -1348,7 +1348,7 @@ static bool _rtl88e_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
 
 static u8 _rtl88e_phy_path_a_iqk(struct ieee80211_hw *hw, bool config_pathb)
 {
-	u32 reg_eac, reg_e94, reg_e9c, reg_ea4;
+	u32 reg_eac, reg_e94, reg_e9c;
 	u8 result = 0x00;
 
 	rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x10008c1c);
@@ -1365,7 +1365,7 @@ static u8 _rtl88e_phy_path_a_iqk(struct ieee80211_hw *hw, bool config_pathb)
 	reg_eac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
 	reg_e94 = rtl_get_bbreg(hw, 0xe94, MASKDWORD);
 	reg_e9c = rtl_get_bbreg(hw, 0xe9c, MASKDWORD);
-	reg_ea4 = rtl_get_bbreg(hw, 0xea4, MASKDWORD);
+	rtl_get_bbreg(hw, 0xea4, MASKDWORD);
 
 	if (!(reg_eac & BIT(28)) &&
 	    (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
-- 
2.25.1

[PATCH 30/41] rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_bt_inquiry’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_wifi_idle_process’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_pan_hs’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2990:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_hid_a2dp’:
 drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3277:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../rtlwifi/btcoexist/halbtc8821a2ant.c       | 27 +++++++++----------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
index e53789f11b08a..447caa4aad325 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c
@@ -1448,17 +1448,15 @@ static void btc8821a2ant_init_coex_dm(struct btc_coexist *btcoexist)
 static void btc8821a2ant_action_bt_inquiry(struct btc_coexist *btcoexist)
 {
 	struct rtl_priv *rtlpriv = btcoexist->adapter;
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
 	bool wifi_connected = false;
 	bool low_pwr_disable = true;
 	bool scan = false, link = false, roam = false;
 
-	wifi_rssi_state =
-		btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
-	wifi_rssi_state1 = btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
+	btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
 				BT_8821A_2ANT_WIFI_RSSI_COEXSWITCH_THRES, 0);
-	bt_rssi_state = btc8821a2ant_bt_rssi_state(btcoexist,
-		2, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 0);
+	btc8821a2ant_bt_rssi_state(btcoexist,
+				2, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 0);
 
 	btcoexist->btc_set(btcoexist, BTC_SET_ACT_DISABLE_LOW_POWER,
 			   &low_pwr_disable);
@@ -1516,15 +1514,14 @@ static void btc8821a2ant_action_wifi_link_process(struct btc_coexist *btcoexist)
 static bool btc8821a2ant_action_wifi_idle_process(struct btc_coexist *btcoexist)
 {
 	struct rtl_priv *rtlpriv = btcoexist->adapter;
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state1;
 	u8 ap_num = 0;
 
-	wifi_rssi_state =
-		btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
+	btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
 	wifi_rssi_state1 = btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
 			BT_8821A_2ANT_WIFI_RSSI_COEXSWITCH_THRES - 20, 0);
-	bt_rssi_state = btc8821a2ant_bt_rssi_state(btcoexist,
-			2, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 0);
+	btc8821a2ant_bt_rssi_state(btcoexist,
+				2, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 0);
 
 	btcoexist->btc_get(btcoexist, BTC_GET_U1_AP_NUM, &ap_num);
 
@@ -2987,11 +2984,11 @@ static void btc8821a2ant_action_pan_edr(struct btc_coexist *btcoexist)
 /* PAN(HS) only */
 static void btc8821a2ant_action_pan_hs(struct btc_coexist *btcoexist)
 {
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state, bt_rssi_state;
 	u32 wifi_bw;
 
 	wifi_rssi_state = btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
-	wifi_rssi_state1 = btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
+	btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
 				BT_8821A_2ANT_WIFI_RSSI_COEXSWITCH_THRES, 0);
 	bt_rssi_state = btc8821a2ant_bt_rssi_state(btcoexist,
 				2, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 0);
@@ -3274,11 +3271,11 @@ static void btc8821a2ant_act_hid_a2dp_pan_edr(struct btc_coexist *btcoexist)
 static void btc8821a2ant_action_hid_a2dp(struct btc_coexist *btcoexist)
 {
 	u32 wifi_bw;
-	u8 wifi_rssi_state, wifi_rssi_state1, bt_rssi_state;
+	u8 wifi_rssi_state, bt_rssi_state;
 	u8 ap_num = 0;
 
 	wifi_rssi_state = btc8821a2ant_wifi_rssi_state(btcoexist, 0, 2, 15, 0);
-	wifi_rssi_state1 = btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
+	btc8821a2ant_wifi_rssi_state(btcoexist, 1, 2,
 				BT_8821A_2ANT_WIFI_RSSI_COEXSWITCH_THRES, 0);
 	bt_rssi_state = btc8821a2ant_bt_rssi_state(btcoexist,
 				3, BT_8821A_2ANT_BT_RSSI_COEXSWITCH_THRES, 37);
-- 
2.25.1

[PATCH 31/41] mwifiex: pcie: Remove a couple of unchecked 'ret's

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_pcie_remove’:
 drivers/net/wireless/marvell/mwifiex/pcie.c:432:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_cleanup_pcie’:
 drivers/net/wireless/marvell/mwifiex/pcie.c:3142:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 6a10ff0377a24..67e0247ebaa65 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -429,7 +429,6 @@ static void mwifiex_pcie_remove(struct pci_dev *pdev)
 	struct mwifiex_private *priv;
 	const struct mwifiex_pcie_card_reg *reg;
 	u32 fw_status;
-	int ret;
 
 	card = pci_get_drvdata(pdev);
 
@@ -441,7 +440,7 @@ static void mwifiex_pcie_remove(struct pci_dev *pdev)
 
 	reg = card->pcie.reg;
 	if (reg)
-		ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
+		mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
 	else
 		fw_status = -1;
 
@@ -3139,12 +3138,11 @@ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
 	struct pcie_service_card *card = adapter->card;
 	struct pci_dev *pdev = card->dev;
 	const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
-	int ret;
 	u32 fw_status;
 
 	cancel_work_sync(&card->work);
 
-	ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
+	mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
 	if (fw_status == FIRMWARE_READY_PCIE) {
 		mwifiex_dbg(adapter, INFO,
 			    "Clearing driver ready signature\n");
-- 
2.25.1

[PATCH 32/41] rtl8723be: trx: Remove set but unused variable 'cck_highpwr'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c: In function ‘_rtl8723be_query_rxphystatus’:
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c:53:6: warning: variable ‘cck_highpwr’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
index 559ab78687c37..5a7cd270575a2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c
@@ -50,7 +50,6 @@ static void _rtl8723be_query_rxphystatus(struct ieee80211_hw *hw,
 	pstatus->rx_mimo_signalquality[1] = -1;
 
 	if (is_cck) {
-		u8 cck_highpwr;
 		u8 cck_agc_rpt;
 
 		cck_agc_rpt = p_phystrpt->cck_agc_rpt_ofdm_cfosho_a;
@@ -59,8 +58,7 @@ static void _rtl8723be_query_rxphystatus(struct ieee80211_hw *hw,
 		/* (2)PWDB, Average PWDB cacluated by
 		 * hardware (for rate adaptive)
 		 */
-		cck_highpwr = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2,
-						 BIT(9));
+		rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, BIT(9));
 
 		lan_idx = ((cck_agc_rpt & 0xE0) >> 5);
 		vga_idx = (cck_agc_rpt & 0x1f);
-- 
2.25.1

[PATCH 33/41] rtlwifi: rtl8821ae: phy: Remove a couple of unused variables

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘rtl8821ae_phy_switch_wirelessband’:
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:14: warning: variable ‘rxpath’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:6: warning: variable ‘txpath’ set but not used [-Wunused-but-set-variable]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index f41a7643b9c42..72ee0700a5497 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -594,11 +594,10 @@ void rtl8821ae_phy_switch_wirelessband(struct ieee80211_hw *hw, u8 band)
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 	struct rtl_dm *rtldm = rtl_dm(rtlpriv);
 	u8 current_band = rtlhal->current_bandtype;
-	u32 txpath, rxpath;
 	s8 bb_diff_between_band;
 
-	txpath = rtl8821ae_phy_query_bb_reg(hw, RTXPATH, 0xf0);
-	rxpath = rtl8821ae_phy_query_bb_reg(hw, RCCK_RX, 0x0f000000);
+	rtl8821ae_phy_query_bb_reg(hw, RTXPATH, 0xf0);
+	rtl8821ae_phy_query_bb_reg(hw, RCCK_RX, 0x0f000000);
 	rtlhal->current_bandtype = (enum band_type) band;
 	/* reconfig BB/RF according to wireless mode */
 	if (rtlhal->current_bandtype == BAND_ON_2_4G) {
-- 
2.25.1

[PATCH 34/41] rtl8821ae: phy: Place braces around empty if() body

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘_rtl8812ae_phy_get_txpower_limit’:
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2453:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index 72ee0700a5497..8a1a2277e137b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -2448,8 +2448,9 @@ static s8 _rtl8812ae_phy_get_txpower_limit(struct ieee80211_hw *hw,
 	else if (band == BAND_ON_5G)
 		channel_temp = _rtl8812ae_phy_get_chnl_idx_of_txpwr_lmt(hw,
 		BAND_ON_5G, channel);
-	else if (band == BAND_ON_BOTH)
+	else if (band == BAND_ON_BOTH) {
 		;/* BAND_ON_BOTH don't care temporarily */
+	}
 
 	if (band_temp == -1 || regulation == -1 || bandwidth_temp == -1 ||
 		rate_section == -1 || channel_temp == -1) {
-- 
2.25.1

[PATCH 35/41] wlcore: spi: Demote a non-compliant function header, fix another

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'child' not described in 'wl12xx_spi_set_block_size'
 drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'blksz' not described in 'wl12xx_spi_set_block_size'
 drivers/net/wireless/ti/wlcore/spi.c:440: warning: Excess function parameter 'res' description in 'wlcore_probe_of'

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Luciano Coelho <luciano.coelho@nokia.com>
Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ti/wlcore/spi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index 18c4d998ce4b9..f26fc150ecd01 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -391,7 +391,7 @@ static int wl12xx_spi_set_power(struct device *child, bool enable)
 	return ret;
 }
 
-/**
+/*
  * wl12xx_spi_set_block_size
  *
  * This function is not needed for spi mode, but need to be present.
@@ -431,7 +431,6 @@ MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
 /**
  * wlcore_probe_of - DT node parsing.
  * @spi: SPI slave device parameters.
- * @res: resource parameters.
  * @glue: wl12xx SPI bus to slave device glue parameters.
  * @pdev_data: wlcore device parameters
  */
-- 
2.25.1

[PATCH 36/41] rtw8822b: Return type is not const

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtw88/rtw8822b.c:90:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]

Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 22d0dd640ac94..b420eb9148796 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -87,7 +87,7 @@ static const u32 rtw8822b_txscale_tbl[RTW_TXSCALE_SIZE] = {
 	0x2d3, 0x2fe, 0x32b, 0x35c, 0x38e, 0x3c4, 0x3fe
 };
 
-static const u8 rtw8822b_get_swing_index(struct rtw_dev *rtwdev)
+static u8 rtw8822b_get_swing_index(struct rtw_dev *rtwdev)
 {
 	u8 i = 0;
 	u32 swing, table_value;
-- 
2.25.1

Re: [36/41] rtw88: rtw8822b: Return type is not const

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/realtek/rtw88/rtw8822b.c:90:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
> 
> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Already fixed in wireless-drivers-next.

Patch set to Superseded.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-37-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 37/41] iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Function parameter or member 'reg_data' not described in 'iwl_dump_ini_mem'
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Excess function parameter 'reg' description in 'iwl_dump_ini_mem'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index ab4a8b942c81d..c0a180b496988 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -1923,7 +1923,7 @@ struct iwl_dump_ini_mem_ops {
  *
  * @fwrt: fw runtime struct
  * @list: list to add the dump tlv to
- * @reg: memory region
+ * @reg_data: memory region
  * @ops: memory dump operations
  */
 static u32 iwl_dump_ini_mem(struct iwl_fw_runtime *fwrt, struct list_head *list,
-- 
2.25.1

[PATCH 38/41] realtek: rtw8822c: Remove unused variable 'corr_val'

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtw88/rtw8822c.c: In function ‘rtw8822c_dpk_dc_corr_check’:
 drivers/net/wireless/realtek/rtw88/rtw8822c.c:2445:5: warning: variable ‘corr_val’ set but not used [-Wunused-but-set-variable]

Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index e37300e98517b..b129a10707573 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -2442,7 +2442,7 @@ static void rtw8822c_dpk_rxbb_dc_cal(struct rtw_dev *rtwdev, u8 path)
 static u8 rtw8822c_dpk_dc_corr_check(struct rtw_dev *rtwdev, u8 path)
 {
 	u16 dc_i, dc_q;
-	u8 corr_val, corr_idx;
+	u8 corr_idx;
 
 	rtw_write32(rtwdev, REG_RXSRAM_CTL, 0x000900f0);
 	dc_i = (u16)rtw_read32_mask(rtwdev, REG_STAT_RPT, GENMASK(27, 16));
@@ -2455,7 +2455,7 @@ static u8 rtw8822c_dpk_dc_corr_check(struct rtw_dev *rtwdev, u8 path)
 
 	rtw_write32(rtwdev, REG_RXSRAM_CTL, 0x000000f0);
 	corr_idx = (u8)rtw_read32_mask(rtwdev, REG_STAT_RPT, GENMASK(7, 0));
-	corr_val = (u8)rtw_read32_mask(rtwdev, REG_STAT_RPT, GENMASK(15, 8));
+	rtw_read32_mask(rtwdev, REG_STAT_RPT, GENMASK(15, 8));
 
 	if (dc_i > 200 || dc_q > 200 || corr_idx < 40 || corr_idx > 65)
 		return 1;
-- 
2.25.1

Re: [38/41] rtw88: rtw8822c: Remove unused variable 'corr_val'

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/net/wireless/realtek/rtw88/rtw8822c.c: In function ‘rtw8822c_dpk_dc_corr_check’:
>  drivers/net/wireless/realtek/rtw88/rtw8822c.c:2445:5: warning: variable ‘corr_val’ set but not used [-Wunused-but-set-variable]
> 
> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Patch applied to wireless-drivers-next.git, thanks.

dff07dda8eb5 rtw88: rtw8822c: Remove unused variable 'corr_val'

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201102112410.1049272-39-lee.jones@linaro.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH 39/41] ath9k: dynack: Demote non-compliant function header

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'old' not described in 'ath_dynack_ewma'
 drivers/net/wireless/ath/ath9k/dynack.c:52: warning: Function parameter or member 'new' not described in 'ath_dynack_ewma'

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/ath/ath9k/dynack.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
index fbeb4a739d321..3219715174a2f 100644
--- a/drivers/net/wireless/ath/ath9k/dynack.c
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -44,9 +44,8 @@ static u32 ath_dynack_get_max_to(struct ath_hw *ah)
 	return 600;
 }
 
-/**
+/*
  * ath_dynack_ewma - EWMA (Exponentially Weighted Moving Average) calculation
- *
  */
 static inline int ath_dynack_ewma(int old, int new)
 {
-- 
2.25.1

[PATCH 40/41] iwlwifi: fw: acpi: Demote non-conformant function headers

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'dev' not described in 'iwl_acpi_get_dsm_object'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'rev' not described in 'iwl_acpi_get_dsm_object'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'func' not described in 'iwl_acpi_get_dsm_object'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'args' not described in 'iwl_acpi_get_dsm_object'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'dev' not described in 'iwl_acpi_get_dsm_u8'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'rev' not described in 'iwl_acpi_get_dsm_u8'
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'func' not described in 'iwl_acpi_get_dsm_u8'

Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
index 3e5a35e26ad34..ab1d8b18d9976 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
@@ -113,11 +113,11 @@ void *iwl_acpi_get_object(struct device *dev, acpi_string method)
 }
 IWL_EXPORT_SYMBOL(iwl_acpi_get_object);
 
-/**
-* Generic function for evaluating a method defined in the device specific
-* method (DSM) interface. The returned acpi object must be freed by calling
-* function.
-*/
+/*
+ * Generic function for evaluating a method defined in the device specific
+ * method (DSM) interface. The returned acpi object must be freed by calling
+ * function.
+ */
 static void *iwl_acpi_get_dsm_object(struct device *dev, int rev, int func,
 				     union acpi_object *args)
 {
@@ -134,7 +134,7 @@ static void *iwl_acpi_get_dsm_object(struct device *dev, int rev, int func,
 	return obj;
 }
 
-/**
+/*
  * Evaluate a DSM with no arguments and a single u8 return value (inside a
  * buffer object), verify and return that value.
  */
-- 
2.25.1

[PATCH 41/41] realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes]
 1488 | int rtw_pci_probe(struct pci_dev *pdev,
 | ^~~~~~~~~~~~~
 drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes]
 1568 | void rtw_pci_remove(struct pci_dev *pdev)
 | ^~~~~~~~~~~~~~
 drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes]
 1590 | void rtw_pci_shutdown(struct pci_dev *pdev)
 | ^~~~~~~~~~~~~~~~

Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/wireless/realtek/rtw88/pci.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index ca17aa9cf7dc7..7cdbb9533a09a 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -212,6 +212,10 @@ struct rtw_pci {
 	void __iomem *mmap;
 };
 
+int rtw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
+void rtw_pci_remove(struct pci_dev *pdev);
+void rtw_pci_shutdown(struct pci_dev *pdev);
+
 static inline u32 max_num_of_tx_queue(u8 queue)
 {
 	u32 max_num;
-- 
2.25.1

Re: [PATCH 41/41] realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

[Brian Norris]

On Mon, Nov 2, 2020 at 3:25 AM Lee Jones <lee.jones@linaro.org> wrote:
> --- a/drivers/net/wireless/realtek/rtw88/pci.h
> +++ b/drivers/net/wireless/realtek/rtw88/pci.h
> @@ -212,6 +212,10 @@ struct rtw_pci {
>         void __iomem *mmap;
>  };
>
> +int rtw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
> +void rtw_pci_remove(struct pci_dev *pdev);
> +void rtw_pci_shutdown(struct pci_dev *pdev);
> +
>

These definitions are already in 4 other header files:

drivers/net/wireless/realtek/rtw88/rtw8723de.h
drivers/net/wireless/realtek/rtw88/rtw8821ce.h
drivers/net/wireless/realtek/rtw88/rtw8822be.h
drivers/net/wireless/realtek/rtw88/rtw8822ce.h

Seems like you should be moving them, not just adding yet another duplicate.

Brian

Re: [PATCH 41/41] realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

[Lee Jones]

On Mon, 02 Nov 2020, Brian Norris wrote:

> On Mon, Nov 2, 2020 at 3:25 AM Lee Jones <lee.jones@linaro.org> wrote:
> > --- a/drivers/net/wireless/realtek/rtw88/pci.h
> > +++ b/drivers/net/wireless/realtek/rtw88/pci.h
> > @@ -212,6 +212,10 @@ struct rtw_pci {
> >         void __iomem *mmap;
> >  };
> >
> > +int rtw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
> > +void rtw_pci_remove(struct pci_dev *pdev);
> > +void rtw_pci_shutdown(struct pci_dev *pdev);
> > +
> >
> 
> These definitions are already in 4 other header files:
> 
> drivers/net/wireless/realtek/rtw88/rtw8723de.h
> drivers/net/wireless/realtek/rtw88/rtw8821ce.h
> drivers/net/wireless/realtek/rtw88/rtw8822be.h
> drivers/net/wireless/realtek/rtw88/rtw8822ce.h
> 
> Seems like you should be moving them, not just adding yet another duplicate.

I followed the current convention.

Happy to optimise if that's what is required.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 41/41] realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> writes:

> On Mon, 02 Nov 2020, Brian Norris wrote:
>
>> On Mon, Nov 2, 2020 at 3:25 AM Lee Jones <lee.jones@linaro.org> wrote:
>> > --- a/drivers/net/wireless/realtek/rtw88/pci.h
>> > +++ b/drivers/net/wireless/realtek/rtw88/pci.h
>> > @@ -212,6 +212,10 @@ struct rtw_pci {
>> >         void __iomem *mmap;
>> >  };
>> >
>> > +int rtw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
>> > +void rtw_pci_remove(struct pci_dev *pdev);
>> > +void rtw_pci_shutdown(struct pci_dev *pdev);
>> > +
>> >
>> 
>> These definitions are already in 4 other header files:
>> 
>> drivers/net/wireless/realtek/rtw88/rtw8723de.h
>> drivers/net/wireless/realtek/rtw88/rtw8821ce.h
>> drivers/net/wireless/realtek/rtw88/rtw8822be.h
>> drivers/net/wireless/realtek/rtw88/rtw8822ce.h
>> 
>> Seems like you should be moving them, not just adding yet another duplicate.
>
> I followed the current convention.
>
> Happy to optimise if that's what is required.

I agree with Brian, these and rtw_pm_ops should be moved to pci.h to
avoid code duplication.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH 41/41] realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

[Lee Jones]

On Sat, 07 Nov 2020, Kalle Valo wrote:

> Lee Jones <lee.jones@linaro.org> writes:
> 
> > On Mon, 02 Nov 2020, Brian Norris wrote:
> >
> >> On Mon, Nov 2, 2020 at 3:25 AM Lee Jones <lee.jones@linaro.org> wrote:
> >> > --- a/drivers/net/wireless/realtek/rtw88/pci.h
> >> > +++ b/drivers/net/wireless/realtek/rtw88/pci.h
> >> > @@ -212,6 +212,10 @@ struct rtw_pci {
> >> >         void __iomem *mmap;
> >> >  };
> >> >
> >> > +int rtw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id);
> >> > +void rtw_pci_remove(struct pci_dev *pdev);
> >> > +void rtw_pci_shutdown(struct pci_dev *pdev);
> >> > +
> >> >
> >> 
> >> These definitions are already in 4 other header files:
> >> 
> >> drivers/net/wireless/realtek/rtw88/rtw8723de.h
> >> drivers/net/wireless/realtek/rtw88/rtw8821ce.h
> >> drivers/net/wireless/realtek/rtw88/rtw8822be.h
> >> drivers/net/wireless/realtek/rtw88/rtw8822ce.h
> >> 
> >> Seems like you should be moving them, not just adding yet another duplicate.
> >
> > I followed the current convention.
> >
> > Happy to optimise if that's what is required.
> 
> I agree with Brian, these and rtw_pm_ops should be moved to pci.h to
> avoid code duplication.

Will do, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> writes:

>  [Last batch!]
>
> This set is part of a larger effort attempting to clean-up W=1
> kernel builds, which are currently overwhelmingly riddled with
> niggly little warnings.
>
> Lee Jones (41):
>   wil6210: wmi: Correct misnamed function parameter 'ptr_'
>   rsi_91x_usb: Fix some basic kernel-doc issues
>   rtl8192cu: mac: Fix some missing/ill-documented function parameters
>   rsi_91x_usb_ops: Source file headers are not good candidates for
>     kernel-doc
>   rtl8192cu: trx: Demote clear abuse of kernel-doc format
>   brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
>   brcmfmac: pcie: Provide description for missing function parameter
>     'devinfo'
>   iwlwifi: mvm: rs: Demote non-conformant function documentation headers
>   wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
>   ath9k: ar9330_1p1_initvals: Remove unused const variable
>     'ar9331_common_tx_gain_offset1_1'
>   ath9k: ar9340_initvals: Remove unused const variable
>     'ar9340Modes_ub124_tx_gain_table_1p0'
>   ath9k: ar9485_initvals: Remove unused const variable
>     'ar9485_fast_clock_1_1_baseband_postamble'
>   ath9k: ar9003_2p2_initvals: Remove unused const variables
>   prism54: isl_ioctl: Fix one function header and demote another
>   iwlwifi: iwl-eeprom-read: Demote one nonconformant function header
>   iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's
>     header
>   intersil: hostap_hw: Prevent incompatible function type cast
>   brcm80211: fweh: Add missing description for 'gfp'
>   ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg'
>     param
>   ath9k: ar5008_phy: Demote half completed function headers
>   ath: dfs_pattern_detector: Fix some function kernel-doc headers
>   ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers
>   iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'
>   wl3501_cs: Fix misspelling and provide missing documentation
>   rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
>   rtlwifi: phy: Remove set but unused variable 'bbvalue'
>   rtlwifi: halbtc8821a1ant: Remove set but unused variable
>     'wifi_rssi_state'
>   rtl8723be: phy: Remove set but unused variable 'lc_cal'
>   rtl8188ee: phy: Remove set but unused variable 'reg_ea4'
>   rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
>   mwifiex: pcie: Remove a couple of unchecked 'ret's
>   rtl8723be: trx: Remove set but unused variable 'cck_highpwr'
>   rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
>   rtl8821ae: phy: Place braces around empty if() body
>   wlcore: spi: Demote a non-compliant function header, fix another
>   rtw8822b: Return type is not const
>   iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header
>   realtek: rtw8822c: Remove unused variable 'corr_val'
>   ath9k: dynack: Demote non-compliant function header
>   iwlwifi: fw: acpi: Demote non-conformant function headers
>   realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown

The cover letter was not CCed to linux-wireless, adding that. But the
patches itself look ok, I see all 41 of them in pathwork:

https://patchwork.kernel.org/project/linux-wireless/list/?series=375401&order=date

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[Lee Jones]

On Mon, 02 Nov 2020, Kalle Valo wrote:

> Lee Jones <lee.jones@linaro.org> writes:
> 
> >  [Last batch!]
> >
> > This set is part of a larger effort attempting to clean-up W=1
> > kernel builds, which are currently overwhelmingly riddled with
> > niggly little warnings.
> >
> > Lee Jones (41):
> >   wil6210: wmi: Correct misnamed function parameter 'ptr_'
> >   rsi_91x_usb: Fix some basic kernel-doc issues
> >   rtl8192cu: mac: Fix some missing/ill-documented function parameters
> >   rsi_91x_usb_ops: Source file headers are not good candidates for
> >     kernel-doc
> >   rtl8192cu: trx: Demote clear abuse of kernel-doc format
> >   brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
> >   brcmfmac: pcie: Provide description for missing function parameter
> >     'devinfo'
> >   iwlwifi: mvm: rs: Demote non-conformant function documentation headers
> >   wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
> >   ath9k: ar9330_1p1_initvals: Remove unused const variable
> >     'ar9331_common_tx_gain_offset1_1'
> >   ath9k: ar9340_initvals: Remove unused const variable
> >     'ar9340Modes_ub124_tx_gain_table_1p0'
> >   ath9k: ar9485_initvals: Remove unused const variable
> >     'ar9485_fast_clock_1_1_baseband_postamble'
> >   ath9k: ar9003_2p2_initvals: Remove unused const variables
> >   prism54: isl_ioctl: Fix one function header and demote another
> >   iwlwifi: iwl-eeprom-read: Demote one nonconformant function header
> >   iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's
> >     header
> >   intersil: hostap_hw: Prevent incompatible function type cast
> >   brcm80211: fweh: Add missing description for 'gfp'
> >   ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg'
> >     param
> >   ath9k: ar5008_phy: Demote half completed function headers
> >   ath: dfs_pattern_detector: Fix some function kernel-doc headers
> >   ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers
> >   iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'
> >   wl3501_cs: Fix misspelling and provide missing documentation
> >   rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
> >   rtlwifi: phy: Remove set but unused variable 'bbvalue'
> >   rtlwifi: halbtc8821a1ant: Remove set but unused variable
> >     'wifi_rssi_state'
> >   rtl8723be: phy: Remove set but unused variable 'lc_cal'
> >   rtl8188ee: phy: Remove set but unused variable 'reg_ea4'
> >   rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
> >   mwifiex: pcie: Remove a couple of unchecked 'ret's
> >   rtl8723be: trx: Remove set but unused variable 'cck_highpwr'
> >   rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
> >   rtl8821ae: phy: Place braces around empty if() body
> >   wlcore: spi: Demote a non-compliant function header, fix another
> >   rtw8822b: Return type is not const
> >   iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header
> >   realtek: rtw8822c: Remove unused variable 'corr_val'
> >   ath9k: dynack: Demote non-compliant function header
> >   iwlwifi: fw: acpi: Demote non-conformant function headers
> >   realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown
> 
> The cover letter was not CCed to linux-wireless, adding that. But the
> patches itself look ok, I see all 41 of them in pathwork:
> 
> https://patchwork.kernel.org/project/linux-wireless/list/?series=375401&order=date

What's the plan for these Kalle?

Are you able to take the ones that do not require a respin?  It would
certainly safe a great deal of mailing list churn if I only
re-submitted the ones that required refactoring.

Of course if you require me to re-submit all of them, then I will do so.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[Kalle Valo]

Lee Jones <lee.jones@linaro.org> writes:

> On Mon, 02 Nov 2020, Kalle Valo wrote:
>
>> Lee Jones <lee.jones@linaro.org> writes:
>> 
>> >  [Last batch!]
>> >
>> > This set is part of a larger effort attempting to clean-up W=1
>> > kernel builds, which are currently overwhelmingly riddled with
>> > niggly little warnings.
>> >
>> > Lee Jones (41):
>> >   wil6210: wmi: Correct misnamed function parameter 'ptr_'
>> >   rsi_91x_usb: Fix some basic kernel-doc issues
>> >   rtl8192cu: mac: Fix some missing/ill-documented function parameters
>> >   rsi_91x_usb_ops: Source file headers are not good candidates for
>> >     kernel-doc
>> >   rtl8192cu: trx: Demote clear abuse of kernel-doc format
>> >   brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
>> >   brcmfmac: pcie: Provide description for missing function parameter
>> >     'devinfo'
>> >   iwlwifi: mvm: rs: Demote non-conformant function documentation headers
>> >   wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
>> >   ath9k: ar9330_1p1_initvals: Remove unused const variable
>> >     'ar9331_common_tx_gain_offset1_1'
>> >   ath9k: ar9340_initvals: Remove unused const variable
>> >     'ar9340Modes_ub124_tx_gain_table_1p0'
>> >   ath9k: ar9485_initvals: Remove unused const variable
>> >     'ar9485_fast_clock_1_1_baseband_postamble'
>> >   ath9k: ar9003_2p2_initvals: Remove unused const variables
>> >   prism54: isl_ioctl: Fix one function header and demote another
>> >   iwlwifi: iwl-eeprom-read: Demote one nonconformant function header
>> >   iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's
>> >     header
>> >   intersil: hostap_hw: Prevent incompatible function type cast
>> >   brcm80211: fweh: Add missing description for 'gfp'
>> >   ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg'
>> >     param
>> >   ath9k: ar5008_phy: Demote half completed function headers
>> >   ath: dfs_pattern_detector: Fix some function kernel-doc headers
>> >   ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers
>> >   iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'
>> >   wl3501_cs: Fix misspelling and provide missing documentation
>> >   rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
>> >   rtlwifi: phy: Remove set but unused variable 'bbvalue'
>> >   rtlwifi: halbtc8821a1ant: Remove set but unused variable
>> >     'wifi_rssi_state'
>> >   rtl8723be: phy: Remove set but unused variable 'lc_cal'
>> >   rtl8188ee: phy: Remove set but unused variable 'reg_ea4'
>> >   rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
>> >   mwifiex: pcie: Remove a couple of unchecked 'ret's
>> >   rtl8723be: trx: Remove set but unused variable 'cck_highpwr'
>> >   rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
>> >   rtl8821ae: phy: Place braces around empty if() body
>> >   wlcore: spi: Demote a non-compliant function header, fix another
>> >   rtw8822b: Return type is not const
>> >   iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header
>> >   realtek: rtw8822c: Remove unused variable 'corr_val'
>> >   ath9k: dynack: Demote non-compliant function header
>> >   iwlwifi: fw: acpi: Demote non-conformant function headers
>> >   realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown
>> 
>> The cover letter was not CCed to linux-wireless, adding that. But the
>> patches itself look ok, I see all 41 of them in pathwork:
>> 
>> https://patchwork.kernel.org/project/linux-wireless/list/?series=375401&order=date
>
> What's the plan for these Kalle?
>
> Are you able to take the ones that do not require a respin?

Been busy and I have 200+ patches to dive through. I (or my patchwork
script) will always let you know if I drop any patches.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH 00/41] [Set 4] Rid W=1 warnings in Wireless

[Lee Jones]

On Fri, 06 Nov 2020, Kalle Valo wrote:

> Lee Jones <lee.jones@linaro.org> writes:
> 
> > On Mon, 02 Nov 2020, Kalle Valo wrote:
> >
> >> Lee Jones <lee.jones@linaro.org> writes:
> >> 
> >> >  [Last batch!]
> >> >
> >> > This set is part of a larger effort attempting to clean-up W=1
> >> > kernel builds, which are currently overwhelmingly riddled with
> >> > niggly little warnings.
> >> >
> >> > Lee Jones (41):
> >> >   wil6210: wmi: Correct misnamed function parameter 'ptr_'
> >> >   rsi_91x_usb: Fix some basic kernel-doc issues
> >> >   rtl8192cu: mac: Fix some missing/ill-documented function parameters
> >> >   rsi_91x_usb_ops: Source file headers are not good candidates for
> >> >     kernel-doc
> >> >   rtl8192cu: trx: Demote clear abuse of kernel-doc format
> >> >   brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'
> >> >   brcmfmac: pcie: Provide description for missing function parameter
> >> >     'devinfo'
> >> >   iwlwifi: mvm: rs: Demote non-conformant function documentation headers
> >> >   wl1251: cmd: Rename 'len' to 'buf_len' in the documentation
> >> >   ath9k: ar9330_1p1_initvals: Remove unused const variable
> >> >     'ar9331_common_tx_gain_offset1_1'
> >> >   ath9k: ar9340_initvals: Remove unused const variable
> >> >     'ar9340Modes_ub124_tx_gain_table_1p0'
> >> >   ath9k: ar9485_initvals: Remove unused const variable
> >> >     'ar9485_fast_clock_1_1_baseband_postamble'
> >> >   ath9k: ar9003_2p2_initvals: Remove unused const variables
> >> >   prism54: isl_ioctl: Fix one function header and demote another
> >> >   iwlwifi: iwl-eeprom-read: Demote one nonconformant function header
> >> >   iwlwifi: iwl-eeprom-parse: Fix 'struct iwl_eeprom_enhanced_txpwr's
> >> >     header
> >> >   intersil: hostap_hw: Prevent incompatible function type cast
> >> >   brcm80211: fweh: Add missing description for 'gfp'
> >> >   ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg'
> >> >     param
> >> >   ath9k: ar5008_phy: Demote half completed function headers
> >> >   ath: dfs_pattern_detector: Fix some function kernel-doc headers
> >> >   ath: dfs_pri_detector: Demote zero/half completed kernel-doc headers
> >> >   iwlwifi: iwl-phy-db: Add missing struct member description for 'trans'
> >> >   wl3501_cs: Fix misspelling and provide missing documentation
> >> >   rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variables
> >> >   rtlwifi: phy: Remove set but unused variable 'bbvalue'
> >> >   rtlwifi: halbtc8821a1ant: Remove set but unused variable
> >> >     'wifi_rssi_state'
> >> >   rtl8723be: phy: Remove set but unused variable 'lc_cal'
> >> >   rtl8188ee: phy: Remove set but unused variable 'reg_ea4'
> >> >   rtlwifi: halbtc8821a2ant: Remove a bunch of unused variables
> >> >   mwifiex: pcie: Remove a couple of unchecked 'ret's
> >> >   rtl8723be: trx: Remove set but unused variable 'cck_highpwr'
> >> >   rtlwifi: rtl8821ae: phy: Remove a couple of unused variables
> >> >   rtl8821ae: phy: Place braces around empty if() body
> >> >   wlcore: spi: Demote a non-compliant function header, fix another
> >> >   rtw8822b: Return type is not const
> >> >   iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function header
> >> >   realtek: rtw8822c: Remove unused variable 'corr_val'
> >> >   ath9k: dynack: Demote non-compliant function header
> >> >   iwlwifi: fw: acpi: Demote non-conformant function headers
> >> >   realtek: rtw88: pci: Add prototypes for .probe, .remove and .shutdown
> >> 
> >> The cover letter was not CCed to linux-wireless, adding that. But the
> >> patches itself look ok, I see all 41 of them in pathwork:
> >> 
> >> https://patchwork.kernel.org/project/linux-wireless/list/?series=375401&order=date
> >
> > What's the plan for these Kalle?
> >
> > Are you able to take the ones that do not require a respin?
> 
> Been busy and I have 200+ patches to dive through. I (or my patchwork
> script) will always let you know if I drop any patches.

Okay, so plan to pluck from that set.

That is ideal.  Thanks for responding.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog