linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] bus: ti-sysc: Assert reset only after disabling clocks
@ 2020-11-10 11:06 Tony Lindgren
  0 siblings, 0 replies; only message in thread
From: Tony Lindgren @ 2020-11-10 11:06 UTC (permalink / raw)
  To: linux-omap
  Cc: Dave Gerlach, Faiz Abbas, Greg Kroah-Hartman, Grygorii Strashko,
	Keerthy, Nishanth Menon, Peter Ujfalusi, Roger Quadros,
	Suman Anna, Tero Kristo, linux-kernel, linux-arm-kernel

The rstctrl reset must be asserted after gating the module clock as
described in the TRM at least for IVA. Otherwise the rstctrl reset
done with module clock enabled can hang the system.

Note that this issue is has been only seen with related IVA changes
that we do not currently have merged. So probably no need to apply
this patch as a fix.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---

This can probably wait for merge window and be merged along with
the other genpd related changes I have been posting. At least I
have not seen this issue except with IVA resets so far.

---
 drivers/bus/ti-sysc.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1222,10 +1222,10 @@ static int __maybe_unused sysc_runtime_suspend(struct device *dev)
 	ddata->enabled = false;
 
 err_allow_idle:
-	reset_control_assert(ddata->rsts);
-
 	sysc_clkdm_allow_idle(ddata);
 
+	reset_control_assert(ddata->rsts);
+
 	return error;
 }
 
@@ -1945,6 +1945,7 @@ static int sysc_reset(struct sysc *ddata)
  */
 static int sysc_init_module(struct sysc *ddata)
 {
+	bool rstctrl_deasserted = false;
 	int error = 0;
 
 	error = sysc_clockdomain_init(ddata);
@@ -1969,6 +1970,7 @@ static int sysc_init_module(struct sysc *ddata)
 		error = reset_control_deassert(ddata->rsts);
 		if (error)
 			goto err_main_clocks;
+		rstctrl_deasserted = true;
 	}
 
 	ddata->revision = sysc_read_revision(ddata);
@@ -1978,13 +1980,13 @@ static int sysc_init_module(struct sysc *ddata)
 	if (ddata->legacy_mode) {
 		error = sysc_legacy_init(ddata);
 		if (error)
-			goto err_reset;
+			goto err_main_clocks;
 	}
 
 	if (!ddata->legacy_mode) {
 		error = sysc_enable_module(ddata->dev);
 		if (error)
-			goto err_reset;
+			goto err_main_clocks;
 	}
 
 	error = sysc_reset(ddata);
@@ -1994,10 +1996,6 @@ static int sysc_init_module(struct sysc *ddata)
 	if (error && !ddata->legacy_mode)
 		sysc_disable_module(ddata->dev);
 
-err_reset:
-	if (error && !(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT))
-		reset_control_assert(ddata->rsts);
-
 err_main_clocks:
 	if (error)
 		sysc_disable_main_clocks(ddata);
@@ -2008,6 +2006,10 @@ static int sysc_init_module(struct sysc *ddata)
 		sysc_clkdm_allow_idle(ddata);
 	}
 
+	if (error && rstctrl_deasserted &&
+	    !(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT))
+		reset_control_assert(ddata->rsts);
+
 	return error;
 }
 
@@ -2975,9 +2977,6 @@ static int sysc_probe(struct platform_device *pdev)
 	}
 
 	/* Balance use counts as PM runtime should have enabled these all */
-	if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT))
-		reset_control_assert(ddata->rsts);
-
 	if (!(ddata->cfg.quirks &
 	      (SYSC_QUIRK_NO_IDLE | SYSC_QUIRK_NO_IDLE_ON_INIT))) {
 		sysc_disable_main_clocks(ddata);
@@ -2985,6 +2984,9 @@ static int sysc_probe(struct platform_device *pdev)
 		sysc_clkdm_allow_idle(ddata);
 	}
 
+	if (!(ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT))
+		reset_control_assert(ddata->rsts);
+
 	sysc_show_registers(ddata);
 
 	ddata->dev->type = &sysc_device_type;
-- 
2.29.2

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-11-10 11:06 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-10 11:06 [PATCH] bus: ti-sysc: Assert reset only after disabling clocks Tony Lindgren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).