* [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR'
@ 2020-11-12 14:54 YueHaibing
2020-11-12 17:20 ` Jason Gunthorpe
0 siblings, 1 reply; 5+ messages in thread
From: YueHaibing @ 2020-11-12 14:54 UTC (permalink / raw)
To: bvanassche, dledford, jgg
Cc: linux-rdma, target-devel, linux-kernel, YueHaibing
Fix smatch warning:
drivers/infiniband/ulp/srpt/ib_srpt.c:2341 srpt_cm_req_recv() warn: passing zero to 'PTR_ERR'
Use PTR_ERR_OR_ZERO instead of PTR_ERR
Fixes: 847462de3a0a ("IB/srpt: Fix srpt_cm_req_recv() error path (1/2)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 6be60aa5ffe2..3ff24b5048ac 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -2338,7 +2338,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev,
if (IS_ERR_OR_NULL(ch->sess)) {
WARN_ON_ONCE(ch->sess == NULL);
- ret = PTR_ERR(ch->sess);
+ ret = PTR_ERR_OR_ZERO(ch->sess);
ch->sess = NULL;
pr_info("Rejected login for initiator %s: ret = %d.\n",
ch->sess_name, ret);
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' 2020-11-12 14:54 [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' YueHaibing @ 2020-11-12 17:20 ` Jason Gunthorpe 2020-11-12 18:25 ` Bart Van Assche 0 siblings, 1 reply; 5+ messages in thread From: Jason Gunthorpe @ 2020-11-12 17:20 UTC (permalink / raw) To: YueHaibing; +Cc: bvanassche, dledford, linux-rdma, target-devel, linux-kernel On Thu, Nov 12, 2020 at 10:54:43PM +0800, YueHaibing wrote: > Fix smatch warning: > > drivers/infiniband/ulp/srpt/ib_srpt.c:2341 srpt_cm_req_recv() warn: passing zero to 'PTR_ERR' > > Use PTR_ERR_OR_ZERO instead of PTR_ERR > > Fixes: 847462de3a0a ("IB/srpt: Fix srpt_cm_req_recv() error path (1/2)") > Signed-off-by: YueHaibing <yuehaibing@huawei.com> > drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c > index 6be60aa5ffe2..3ff24b5048ac 100644 > +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c > @@ -2338,7 +2338,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > if (IS_ERR_OR_NULL(ch->sess)) { > WARN_ON_ONCE(ch->sess == NULL); > - ret = PTR_ERR(ch->sess); > + ret = PTR_ERR_OR_ZERO(ch->sess); > ch->sess = NULL; > pr_info("Rejected login for initiator %s: ret = %d.\n", > ch->sess_name, ret); I think it should be like this, Bart? diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 6017d525084a0c..80f9673956ced2 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2311,7 +2311,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, mutex_lock(&sport->port_guid_id.mutex); list_for_each_entry(stpg, &sport->port_guid_id.tpg_list, entry) { - if (!IS_ERR_OR_NULL(ch->sess)) + if (ch->sess) break; ch->sess = target_setup_session(&stpg->tpg, tag_num, tag_size, TARGET_PROT_NORMAL, @@ -2321,12 +2321,12 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, mutex_lock(&sport->port_gid_id.mutex); list_for_each_entry(stpg, &sport->port_gid_id.tpg_list, entry) { - if (!IS_ERR_OR_NULL(ch->sess)) + if (ch->sess) break; ch->sess = target_setup_session(&stpg->tpg, tag_num, tag_size, TARGET_PROT_NORMAL, i_port_id, ch, NULL); - if (!IS_ERR_OR_NULL(ch->sess)) + if (ch->sess) break; /* Retry without leading "0x" */ ch->sess = target_setup_session(&stpg->tpg, tag_num, @@ -2335,7 +2335,9 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, } mutex_unlock(&sport->port_gid_id.mutex); - if (IS_ERR_OR_NULL(ch->sess)) { + if (!ch->sess) + ch->sess = ERR_PTR(-ENOENT); + if (IS_ERR(ch->sess)) { WARN_ON_ONCE(ch->sess == NULL); ret = PTR_ERR(ch->sess); ch->sess = NULL; ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' 2020-11-12 17:20 ` Jason Gunthorpe @ 2020-11-12 18:25 ` Bart Van Assche 2020-11-12 18:30 ` Jason Gunthorpe 0 siblings, 1 reply; 5+ messages in thread From: Bart Van Assche @ 2020-11-12 18:25 UTC (permalink / raw) To: Jason Gunthorpe, YueHaibing Cc: dledford, linux-rdma, target-devel, linux-kernel On 11/12/20 9:20 AM, Jason Gunthorpe wrote: > I think it should be like this, Bart? > > diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c > index 6017d525084a0c..80f9673956ced2 100644 > --- a/drivers/infiniband/ulp/srpt/ib_srpt.c > +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c > @@ -2311,7 +2311,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > mutex_lock(&sport->port_guid_id.mutex); > list_for_each_entry(stpg, &sport->port_guid_id.tpg_list, entry) { > - if (!IS_ERR_OR_NULL(ch->sess)) > + if (ch->sess) > break; > ch->sess = target_setup_session(&stpg->tpg, tag_num, > tag_size, TARGET_PROT_NORMAL, > @@ -2321,12 +2321,12 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > mutex_lock(&sport->port_gid_id.mutex); > list_for_each_entry(stpg, &sport->port_gid_id.tpg_list, entry) { > - if (!IS_ERR_OR_NULL(ch->sess)) > + if (ch->sess) > break; > ch->sess = target_setup_session(&stpg->tpg, tag_num, > tag_size, TARGET_PROT_NORMAL, i_port_id, > ch, NULL); > - if (!IS_ERR_OR_NULL(ch->sess)) > + if (ch->sess) > break; > /* Retry without leading "0x" */ > ch->sess = target_setup_session(&stpg->tpg, tag_num, > @@ -2335,7 +2335,9 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > } > mutex_unlock(&sport->port_gid_id.mutex); > > - if (IS_ERR_OR_NULL(ch->sess)) { > + if (!ch->sess) > + ch->sess = ERR_PTR(-ENOENT); > + if (IS_ERR(ch->sess)) { > WARN_ON_ONCE(ch->sess == NULL); > ret = PTR_ERR(ch->sess); > ch->sess = NULL; > Hi Jason, The ib_srpt driver accepts three different formats for the initiator ACL. Up to two of the three target_setup_session() calls will fail if the fifth argument of target_setup_session() does not use the format of the initiator ID in configfs. If the first or the second target_setup_session() call fails it is essential that later target_setup_session() calls happen. Hence the IS_ERR_OR_NULL(ch->sess) checks in the above loops. In other words, I like YueHaibing's patch better. Thanks, Bart. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' 2020-11-12 18:25 ` Bart Van Assche @ 2020-11-12 18:30 ` Jason Gunthorpe 2021-05-14 7:54 ` YueHaibing 0 siblings, 1 reply; 5+ messages in thread From: Jason Gunthorpe @ 2020-11-12 18:30 UTC (permalink / raw) To: Bart Van Assche Cc: YueHaibing, dledford, linux-rdma, target-devel, linux-kernel On Thu, Nov 12, 2020 at 10:25:48AM -0800, Bart Van Assche wrote: > On 11/12/20 9:20 AM, Jason Gunthorpe wrote: > > I think it should be like this, Bart? > > > > diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c > > index 6017d525084a0c..80f9673956ced2 100644 > > +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c > > @@ -2311,7 +2311,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > mutex_lock(&sport->port_guid_id.mutex); > > list_for_each_entry(stpg, &sport->port_guid_id.tpg_list, entry) { > > - if (!IS_ERR_OR_NULL(ch->sess)) > > + if (ch->sess) > > break; > > ch->sess = target_setup_session(&stpg->tpg, tag_num, > > tag_size, TARGET_PROT_NORMAL, > > @@ -2321,12 +2321,12 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > mutex_lock(&sport->port_gid_id.mutex); > > list_for_each_entry(stpg, &sport->port_gid_id.tpg_list, entry) { > > - if (!IS_ERR_OR_NULL(ch->sess)) > > + if (ch->sess) > > break; > > ch->sess = target_setup_session(&stpg->tpg, tag_num, > > tag_size, TARGET_PROT_NORMAL, i_port_id, > > ch, NULL); > > - if (!IS_ERR_OR_NULL(ch->sess)) > > + if (ch->sess) > > break; > > /* Retry without leading "0x" */ > > ch->sess = target_setup_session(&stpg->tpg, tag_num, > > @@ -2335,7 +2335,9 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, > > } > > mutex_unlock(&sport->port_gid_id.mutex); > > - if (IS_ERR_OR_NULL(ch->sess)) { > > + if (!ch->sess) > > + ch->sess = ERR_PTR(-ENOENT); > > + if (IS_ERR(ch->sess)) { > > WARN_ON_ONCE(ch->sess == NULL); > > ret = PTR_ERR(ch->sess); > > ch->sess = NULL; > > > > Hi Jason, > > The ib_srpt driver accepts three different formats for the initiator ACL. Up > to two of the three target_setup_session() calls will fail if the fifth > argument of target_setup_session() does not use the format of the initiator > ID in configfs. If the first or the second target_setup_session() call fails > it is essential that later target_setup_session() calls happen. Hence the > IS_ERR_OR_NULL(ch->sess) checks in the above loops. IS_ERR_OR_NULL is an abomination, it should not be used. I see I didn't quite get it right, but that is still closer to sane, probably target_setup_session() should return NULL not err_ptr Jason ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' 2020-11-12 18:30 ` Jason Gunthorpe @ 2021-05-14 7:54 ` YueHaibing 0 siblings, 0 replies; 5+ messages in thread From: YueHaibing @ 2021-05-14 7:54 UTC (permalink / raw) To: Jason Gunthorpe, Bart Van Assche Cc: dledford, linux-rdma, target-devel, linux-kernel On 2020/11/13 2:30, Jason Gunthorpe wrote: > On Thu, Nov 12, 2020 at 10:25:48AM -0800, Bart Van Assche wrote: >> On 11/12/20 9:20 AM, Jason Gunthorpe wrote: >>> I think it should be like this, Bart? >>> >>> diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c >>> index 6017d525084a0c..80f9673956ced2 100644 >>> +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c >>> @@ -2311,7 +2311,7 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, >>> mutex_lock(&sport->port_guid_id.mutex); >>> list_for_each_entry(stpg, &sport->port_guid_id.tpg_list, entry) { >>> - if (!IS_ERR_OR_NULL(ch->sess)) >>> + if (ch->sess) >>> break; >>> ch->sess = target_setup_session(&stpg->tpg, tag_num, >>> tag_size, TARGET_PROT_NORMAL, >>> @@ -2321,12 +2321,12 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, >>> mutex_lock(&sport->port_gid_id.mutex); >>> list_for_each_entry(stpg, &sport->port_gid_id.tpg_list, entry) { >>> - if (!IS_ERR_OR_NULL(ch->sess)) >>> + if (ch->sess) >>> break; >>> ch->sess = target_setup_session(&stpg->tpg, tag_num, >>> tag_size, TARGET_PROT_NORMAL, i_port_id, >>> ch, NULL); >>> - if (!IS_ERR_OR_NULL(ch->sess)) >>> + if (ch->sess) >>> break; >>> /* Retry without leading "0x" */ >>> ch->sess = target_setup_session(&stpg->tpg, tag_num, >>> @@ -2335,7 +2335,9 @@ static int srpt_cm_req_recv(struct srpt_device *const sdev, >>> } >>> mutex_unlock(&sport->port_gid_id.mutex); >>> - if (IS_ERR_OR_NULL(ch->sess)) { >>> + if (!ch->sess) >>> + ch->sess = ERR_PTR(-ENOENT); >>> + if (IS_ERR(ch->sess)) { >>> WARN_ON_ONCE(ch->sess == NULL); >>> ret = PTR_ERR(ch->sess); >>> ch->sess = NULL; >>> >> >> Hi Jason, >> >> The ib_srpt driver accepts three different formats for the initiator ACL. Up >> to two of the three target_setup_session() calls will fail if the fifth >> argument of target_setup_session() does not use the format of the initiator >> ID in configfs. If the first or the second target_setup_session() call fails >> it is essential that later target_setup_session() calls happen. Hence the >> IS_ERR_OR_NULL(ch->sess) checks in the above loops. > > IS_ERR_OR_NULL is an abomination, it should not be used. > > I see I didn't quite get it right, but that is still closer to sane, > probably target_setup_session() should return NULL not err_ptr Any fix plan? > > Jason > . > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-05-14 7:54 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-11-12 14:54 [PATCH] IB/srpt: Fix passing zero to 'PTR_ERR' YueHaibing 2020-11-12 17:20 ` Jason Gunthorpe 2020-11-12 18:25 ` Bart Van Assche 2020-11-12 18:30 ` Jason Gunthorpe 2021-05-14 7:54 ` YueHaibing
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).