* [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
2020-11-16 7:46 [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml Rafał Miłecki
@ 2020-11-16 7:46 ` Rafał Miłecki
2020-12-07 19:21 ` Rob Herring
2021-03-11 20:33 ` Rafał Miłecki
2020-11-19 6:30 ` [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: " Vinod Koul
` (3 subsequent siblings)
4 siblings, 2 replies; 12+ messages in thread
From: Rafał Miłecki @ 2020-11-16 7:46 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul
Cc: linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
1. Convert from txt to yaml
2. Drop "Driver for" from the title
3. Document "#phy-cells"
4. Fix example node name (noticed by dt_binding_check)
5. Add #include to example (noticed by dt_binding_check)
6. Specify license
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
I think this should go through linux-phy tree. Kishon, Vinod, can you
take this patch?
This patch generates a false positive checkpatch.pl warning [0].
Please ignore:
WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
[0] https://lkml.org/lkml/2020/2/18/1084
---
.../bindings/phy/bcm-ns-usb2-phy.txt | 21 -------
.../bindings/phy/bcm-ns-usb2-phy.yaml | 59 +++++++++++++++++++
2 files changed, 59 insertions(+), 21 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
deleted file mode 100644
index a7aee9ea8926..000000000000
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Driver for Broadcom Northstar USB 2.0 PHY
-
-Required properties:
-- compatible: brcm,ns-usb2-phy
-- reg: iomem address range of DMU (Device Management Unit)
-- reg-names: "dmu", the only needed & supported reg right now
-- clocks: USB PHY reference clock
-- clock-names: "phy-ref-clk", the only needed & supported clock right now
-
-To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
-requires passing phandle to the USB PHY reference clock.
-
-Example:
- usb2-phy {
- compatible = "brcm,ns-usb2-phy";
- reg = <0x1800c000 0x1000>;
- reg-names = "dmu";
- #phy-cells = <0>;
- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
- clock-names = "phy-ref-clk";
- };
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
new file mode 100644
index 000000000000..05b4dcd80019
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 2.0 PHY
+
+description: >
+ To initialize USB 2.0 PHY driver needs to setup PLL correctly.
+ To do this it requires passing phandle to the USB PHY reference clock.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ compatible:
+ const: brcm,ns-usb2-phy
+
+ reg:
+ items:
+ - description: iomem address range of DMU (Device Management Unit)
+
+ reg-names:
+ items:
+ - const: dmu
+
+ clocks:
+ items:
+ - description: USB PHY reference clock
+
+ clock-names:
+ items:
+ - const: phy-ref-clk
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm-nsp.h>
+ phy@1800c000 {
+ compatible = "brcm,ns-usb2-phy";
+ reg = <0x1800c000 0x1000>;
+ reg-names = "dmu";
+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+ clock-names = "phy-ref-clk";
+ #phy-cells = <0>;
+ };
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
2020-11-16 7:46 ` [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: " Rafał Miłecki
@ 2020-12-07 19:21 ` Rob Herring
2021-03-11 20:33 ` Rafał Miłecki
1 sibling, 0 replies; 12+ messages in thread
From: Rob Herring @ 2020-12-07 19:21 UTC (permalink / raw)
To: Rafał Miłecki
Cc: devicetree, Hauke Mehrtens, Kishon Vijay Abraham I, linux-kernel,
Rafał Miłecki, bcm-kernel-feedback-list, Vinod Koul
On Mon, 16 Nov 2020 08:46:50 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Convert from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Document "#phy-cells"
> 4. Fix example node name (noticed by dt_binding_check)
> 5. Add #include to example (noticed by dt_binding_check)
> 6. Specify license
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
> .../bindings/phy/bcm-ns-usb2-phy.txt | 21 -------
> .../bindings/phy/bcm-ns-usb2-phy.yaml | 59 +++++++++++++++++++
> 2 files changed, 59 insertions(+), 21 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml
2020-11-16 7:46 ` [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: " Rafał Miłecki
2020-12-07 19:21 ` Rob Herring
@ 2021-03-11 20:33 ` Rafał Miłecki
1 sibling, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2021-03-11 20:33 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul
Cc: linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy,
Vivek Unune
On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Convert from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Document "#phy-cells"
> 4. Fix example node name (noticed by dt_binding_check)
> 5. Add #include to example (noticed by dt_binding_check)
> 6. Specify license
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>
> [0] https://lkml.org/lkml/2020/2/18/1084
Same thing here.
Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.
Could you push this patch to the linux-phy.git?
> ---
> .../bindings/phy/bcm-ns-usb2-phy.txt | 21 -------
> .../bindings/phy/bcm-ns-usb2-phy.yaml | 59 +++++++++++++++++++
> 2 files changed, 59 insertions(+), 21 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> deleted file mode 100644
> index a7aee9ea8926..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -Driver for Broadcom Northstar USB 2.0 PHY
> -
> -Required properties:
> -- compatible: brcm,ns-usb2-phy
> -- reg: iomem address range of DMU (Device Management Unit)
> -- reg-names: "dmu", the only needed & supported reg right now
> -- clocks: USB PHY reference clock
> -- clock-names: "phy-ref-clk", the only needed & supported clock right now
> -
> -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
> -requires passing phandle to the USB PHY reference clock.
> -
> -Example:
> - usb2-phy {
> - compatible = "brcm,ns-usb2-phy";
> - reg = <0x1800c000 0x1000>;
> - reg-names = "dmu";
> - #phy-cells = <0>;
> - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> - clock-names = "phy-ref-clk";
> - };
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> new file mode 100644
> index 000000000000..05b4dcd80019
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 2.0 PHY
> +
> +description: >
> + To initialize USB 2.0 PHY driver needs to setup PLL correctly.
> + To do this it requires passing phandle to the USB PHY reference clock.
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> + compatible:
> + const: brcm,ns-usb2-phy
> +
> + reg:
> + items:
> + - description: iomem address range of DMU (Device Management Unit)
> +
> + reg-names:
> + items:
> + - const: dmu
> +
> + clocks:
> + items:
> + - description: USB PHY reference clock
> +
> + clock-names:
> + items:
> + - const: phy-ref-clk
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm-nsp.h>
> + phy@1800c000 {
> + compatible = "brcm,ns-usb2-phy";
> + reg = <0x1800c000 0x1000>;
> + reg-names = "dmu";
> + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
> + clock-names = "phy-ref-clk";
> + #phy-cells = <0>;
> + };
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-16 7:46 [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml Rafał Miłecki
2020-11-16 7:46 ` [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: " Rafał Miłecki
@ 2020-11-19 6:30 ` Vinod Koul
2020-11-30 15:43 ` Vinod Koul
` (2 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Vinod Koul @ 2020-11-19 6:30 UTC (permalink / raw)
To: Rafał Miłecki, Rob Herring
Cc: Kishon Vijay Abraham I, linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki
On 16-11-20, 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
You missed Ccing Rob
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
That is okay, it is a warning ;-)
>
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
> .../bindings/phy/bcm-ns-usb3-phy.txt | 34 ----------
> .../bindings/phy/bcm-ns-usb3-phy.yaml | 62 +++++++++++++++++++
> 2 files changed, 62 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> deleted file mode 100644
> index 32f057260351..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Driver for Broadcom Northstar USB 3.0 PHY
> -
> -Required properties:
> -
> -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: address of MDIO bus device
> -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> - registers
> -- #phy-cells: must be 0
> -
> -Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> -three known series: Ax, Bx and Cx.
> -Known A0: BCM4707 rev 0
> -Known B0: BCM4707 rev 4, BCM53573 rev 2
> -Known B1: BCM4707 rev 6
> -Known C0: BCM47094 rev 0
> -
> -Example:
> - mdio: mdio@0 {
> - reg = <0x0>;
> - #size-cells = <1>;
> - #address-cells = <0>;
> -
> - usb3-phy@10 {
> - compatible = "brcm,ns-ax-usb3-phy";
> - reg = <0x10>;
> - usb3-dmp-syscon = <&usb3_dmp>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - usb3_dmp: syscon@18105000 {
> - reg = <0x18105000 0x1000>;
> - };
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> new file mode 100644
> index 000000000000..7fd419db45d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 3.0 PHY
> +
> +description: |
> + Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> + three known series: Ax, Bx and Cx.
> + Known A0: BCM4707 rev 0
> + Known B0: BCM4707 rev 4, BCM53573 rev 2
> + Known B1: BCM4707 rev 6
> + Known C0: BCM47094 rev 0
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,ns-ax-usb3-phy
> + - brcm,ns-bx-usb3-phy
> +
> + reg:
> + description: address of MDIO bus device
> + maxItems: 1
> +
> + usb3-dmp-syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the DMP (Device Management Plugin) syscon
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - usb3-dmp-syscon
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usb3-phy@10 {
> + compatible = "brcm,ns-ax-usb3-phy";
> + reg = <0x10>;
> + usb3-dmp-syscon = <&usb3_dmp>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + usb3_dmp: syscon@18105000 {
> + reg = <0x18105000 0x1000>;
> + };
> --
> 2.27.0
--
~Vinod
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-16 7:46 [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml Rafał Miłecki
2020-11-16 7:46 ` [PATCH] dt-bindings: phy: bcm-ns-usb2-phy: " Rafał Miłecki
2020-11-19 6:30 ` [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: " Vinod Koul
@ 2020-11-30 15:43 ` Vinod Koul
2020-11-30 15:58 ` Rafał Miłecki
2020-12-07 19:20 ` Rob Herring
2021-03-11 20:31 ` Rafał Miłecki
4 siblings, 1 reply; 12+ messages in thread
From: Vinod Koul @ 2020-11-30 15:43 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Kishon Vijay Abraham I, linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki
On 16-11-20, 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
I am seeing warnings for indentation:
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
Can you pls fix those as well
--
~Vinod
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-30 15:43 ` Vinod Koul
@ 2020-11-30 15:58 ` Rafał Miłecki
2020-11-30 16:01 ` Rafał Miłecki
0 siblings, 1 reply; 12+ messages in thread
From: Rafał Miłecki @ 2020-11-30 15:58 UTC (permalink / raw)
To: Vinod Koul
Cc: Kishon Vijay Abraham I, linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki
On 30.11.2020 16:43, Vinod Koul wrote:
> On 16-11-20, 08:46, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> 1. Change syntax from txt to yaml
>> 2. Drop "Driver for" from the title
>> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>> 4. Specify license
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> ---
>> I think this should go through linux-phy tree. Kishon, Vinod, can you
>> take this patch?
>>
>> This patch generates a false positive checkpatch.pl warning [0].
>> Please ignore:
>> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>
> I am seeing warnings for indentation:
>
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>
> Can you pls fix those as well
Sure, just note, it's a different YAML file (I missed that initially and was
triple checking my bcm-ns-usb3-phy.yaml ;) ). So I'll handle it using a
different patch.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-30 15:58 ` Rafał Miłecki
@ 2020-11-30 16:01 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2020-11-30 16:01 UTC (permalink / raw)
To: Vinod Koul
Cc: Kishon Vijay Abraham I, linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki
On 30.11.2020 16:58, Rafał Miłecki wrote:
> On 30.11.2020 16:43, Vinod Koul wrote:
>> On 16-11-20, 08:46, Rafał Miłecki wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> 1. Change syntax from txt to yaml
>>> 2. Drop "Driver for" from the title
>>> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>>> 4. Specify license
>>>
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>> ---
>>> I think this should go through linux-phy tree. Kishon, Vinod, can you
>>> take this patch?
>>>
>>> This patch generates a false positive checkpatch.pl warning [0].
>>> Please ignore:
>>> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>>
>> I am seeing warnings for indentation:
>>
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:19:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:20:12: [warning] wrong indentation: expected 12 but found 11 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:30:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:51:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:71:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:80:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>> Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml:88:11: [warning] wrong indentation: expected 9 but found 10 (indentation)
>>
>> Can you pls fix those as well
>
> Sure, just note, it's a different YAML file (I missed that initially and was
> triple checking my bcm-ns-usb3-phy.yaml ;) ). So I'll handle it using a
> different patch.
Oh, that file doesn't actualy exist in tree yet. I guess you meant to reply to Florian's patch
[PATCH] dt-bindings: phy: Convert Broadcom SATA PHY to YAML
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-16 7:46 [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml Rafał Miłecki
` (2 preceding siblings ...)
2020-11-30 15:43 ` Vinod Koul
@ 2020-12-07 19:20 ` Rob Herring
2021-03-11 20:31 ` Rafał Miłecki
4 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2020-12-07 19:20 UTC (permalink / raw)
To: Rafał Miłecki
Cc: devicetree, Kishon Vijay Abraham I, linux-kernel, Hauke Mehrtens,
Rafał Miłecki, Vinod Koul, bcm-kernel-feedback-list
On Mon, 16 Nov 2020 08:46:49 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>
> [0] https://lkml.org/lkml/2020/2/18/1084
> ---
> .../bindings/phy/bcm-ns-usb3-phy.txt | 34 ----------
> .../bindings/phy/bcm-ns-usb3-phy.yaml | 62 +++++++++++++++++++
> 2 files changed, 62 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2020-11-16 7:46 [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml Rafał Miłecki
` (3 preceding siblings ...)
2020-12-07 19:20 ` Rob Herring
@ 2021-03-11 20:31 ` Rafał Miłecki
2021-03-15 10:41 ` Vinod Koul
4 siblings, 1 reply; 12+ messages in thread
From: Rafał Miłecki @ 2021-03-11 20:31 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul
Cc: linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy,
Vivek Unune
Hi,
On 16.11.2020 08:46, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> 1. Change syntax from txt to yaml
> 2. Drop "Driver for" from the title
> 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> 4. Specify license
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> I think this should go through linux-phy tree. Kishon, Vinod, can you
> take this patch?
>
> This patch generates a false positive checkpatch.pl warning [0].
> Please ignore:
> WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>
> [0] https://lkml.org/lkml/2020/2/18/1084
Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
Rob, but never accepted.
Could you push this patch to the linux-phy.git?
> ---
> .../bindings/phy/bcm-ns-usb3-phy.txt | 34 ----------
> .../bindings/phy/bcm-ns-usb3-phy.yaml | 62 +++++++++++++++++++
> 2 files changed, 62 insertions(+), 34 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> deleted file mode 100644
> index 32f057260351..000000000000
> --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -Driver for Broadcom Northstar USB 3.0 PHY
> -
> -Required properties:
> -
> -- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
> -- reg: address of MDIO bus device
> -- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
> - registers
> -- #phy-cells: must be 0
> -
> -Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> -three known series: Ax, Bx and Cx.
> -Known A0: BCM4707 rev 0
> -Known B0: BCM4707 rev 4, BCM53573 rev 2
> -Known B1: BCM4707 rev 6
> -Known C0: BCM47094 rev 0
> -
> -Example:
> - mdio: mdio@0 {
> - reg = <0x0>;
> - #size-cells = <1>;
> - #address-cells = <0>;
> -
> - usb3-phy@10 {
> - compatible = "brcm,ns-ax-usb3-phy";
> - reg = <0x10>;
> - usb3-dmp-syscon = <&usb3_dmp>;
> - #phy-cells = <0>;
> - };
> - };
> -
> - usb3_dmp: syscon@18105000 {
> - reg = <0x18105000 0x1000>;
> - };
> diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> new file mode 100644
> index 000000000000..7fd419db45d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom Northstar USB 3.0 PHY
> +
> +description: |
> + Initialization of USB 3.0 PHY depends on Northstar version. There are currently
> + three known series: Ax, Bx and Cx.
> + Known A0: BCM4707 rev 0
> + Known B0: BCM4707 rev 4, BCM53573 rev 2
> + Known B1: BCM4707 rev 6
> + Known C0: BCM47094 rev 0
> +
> +maintainers:
> + - Rafał Miłecki <rafal@milecki.pl>
> +
> +properties:
> + compatible:
> + enum:
> + - brcm,ns-ax-usb3-phy
> + - brcm,ns-bx-usb3-phy
> +
> + reg:
> + description: address of MDIO bus device
> + maxItems: 1
> +
> + usb3-dmp-syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to the DMP (Device Management Plugin) syscon
> +
> + "#phy-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - usb3-dmp-syscon
> + - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usb3-phy@10 {
> + compatible = "brcm,ns-ax-usb3-phy";
> + reg = <0x10>;
> + usb3-dmp-syscon = <&usb3_dmp>;
> + #phy-cells = <0>;
> + };
> + };
> +
> + usb3_dmp: syscon@18105000 {
> + reg = <0x18105000 0x1000>;
> + };
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2021-03-11 20:31 ` Rafał Miłecki
@ 2021-03-15 10:41 ` Vinod Koul
2021-03-15 17:27 ` Rafał Miłecki
0 siblings, 1 reply; 12+ messages in thread
From: Vinod Koul @ 2021-03-15 10:41 UTC (permalink / raw)
To: Rafał Miłecki
Cc: Kishon Vijay Abraham I, linux-kernel, devicetree, Hauke Mehrtens,
bcm-kernel-feedback-list, Rafał Miłecki, linux-phy,
Vivek Unune
On 11-03-21, 21:31, Rafał Miłecki wrote:
> Hi,
>
> On 16.11.2020 08:46, Rafał Miłecki wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> >
> > 1. Change syntax from txt to yaml
> > 2. Drop "Driver for" from the title
> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
> > 4. Specify license
> >
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> > ---
> > I think this should go through linux-phy tree. Kishon, Vinod, can you
> > take this patch?
> >
> > This patch generates a false positive checkpatch.pl warning [0].
> > Please ignore:
> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> >
> > [0] https://lkml.org/lkml/2020/2/18/1084
>
> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
> Rob, but never accepted.
>
> Could you push this patch to the linux-phy.git?
Can you please rebase and resent me this patch. I am trying to
streamline patches now using phy ml and pw instance so that we dont miss
anything..
Thanks
--
~Vinod
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml
2021-03-15 10:41 ` Vinod Koul
@ 2021-03-15 17:27 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2021-03-15 17:27 UTC (permalink / raw)
To: Vinod Koul
Cc: Rafał Miłecki, Kishon Vijay Abraham I, linux-kernel,
devicetree, Hauke Mehrtens, bcm-kernel-feedback-list, linux-phy,
Vivek Unune
On 2021-03-15 11:41, Vinod Koul wrote:
> On 11-03-21, 21:31, Rafał Miłecki wrote:
>> Hi,
>>
>> On 16.11.2020 08:46, Rafał Miłecki wrote:
>> > From: Rafał Miłecki <rafal@milecki.pl>
>> >
>> > 1. Change syntax from txt to yaml
>> > 2. Drop "Driver for" from the title
>> > 3. Drop "reg = <0x0>;" from example (noticed by dt_binding_check)
>> > 4. Specify license
>> >
>> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>> > ---
>> > I think this should go through linux-phy tree. Kishon, Vinod, can you
>> > take this patch?
>> >
>> > This patch generates a false positive checkpatch.pl warning [0].
>> > Please ignore:
>> > WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>> >
>> > [0] https://lkml.org/lkml/2020/2/18/1084
>>
>> Kishon, Vinod: I sent this patch back in December, it was Reviewed-by
>> Rob, but never accepted.
>>
>> Could you push this patch to the linux-phy.git?
>
> Can you please rebase and resent me this patch. I am trying to
> streamline patches now using phy ml and pw instance so that we dont
> miss
> anything..
Both patches apply cleanly. Maybe your mail client malformed them for
you?
They are accessible in the devicetree-bindings patchwork:
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/
You can apply both patches doing e.g.:
curl
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-1-zajec5@gmail.com/mbox/
| git am
curl
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20201116074650.16070-2-zajec5@gmail.com/mbox/
| git am
^ permalink raw reply [flat|nested] 12+ messages in thread