* [PATCH] misc: rtsx: rts5249 support runtime PM
@ 2020-11-24 6:02 ricky_wu
2020-11-24 20:49 ` Bjorn Helgaas
0 siblings, 1 reply; 6+ messages in thread
From: ricky_wu @ 2020-11-24 6:02 UTC (permalink / raw)
To: arnd, gregkh, ulf.hansson, bhelgaas, ricky_wu, vaibhavgupta40,
kdlnx, dianders, rmfrfs, lee.jones, linux-kernel, linux-mmc
From: Ricky Wu <ricky_wu@realtek.com>
rtsx_pci_sdmmc: add to support autosuspend when the rtd3_en is set
rtsx_pcr: add callback functions about runtime PM
add delay_work(rtd3_work) to decrease usage count to 0 when staying
at idle over 10 sec
rts5249: add extra flow at init function to support wakeup from d3
and set rtd3_en from register setting
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
---
drivers/misc/cardreader/rts5249.c | 25 ++++--
drivers/misc/cardreader/rtsx_pcr.c | 122 +++++++++++++++++++++++++++--
drivers/misc/cardreader/rtsx_pcr.h | 1 +
drivers/mmc/host/rtsx_pci_sdmmc.c | 18 ++++-
include/linux/rtsx_pci.h | 1 +
5 files changed, 152 insertions(+), 15 deletions(-)
diff --git a/drivers/misc/cardreader/rts5249.c b/drivers/misc/cardreader/rts5249.c
index b85279f1fc5e..1da3b1ca1121 100644
--- a/drivers/misc/cardreader/rts5249.c
+++ b/drivers/misc/cardreader/rts5249.c
@@ -65,7 +65,6 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr_dbg(pcr, "skip fetch vendor setting\n");
return;
}
-
pcr->aspm_en = rtsx_reg_to_aspm(reg);
pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
pcr->card_drive_sel &= 0x3F;
@@ -73,6 +72,8 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+
+ pcr->rtd3_en = rtsx_reg_to_rtd3_uhsii(reg);
if (rtsx_check_mmc_support(reg))
pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
@@ -278,13 +279,25 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
- if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
+ if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A))
rtsx_pci_write_register(pcr, REG_VREF, PWD_SUSPND_EN, PWD_SUSPND_EN);
- rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
- rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
+
+ if (pcr->rtd3_en) {
+ if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
+ rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x01);
+ rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x30);
+ } else {
+ rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x01);
+ rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x33);
+ }
} else {
- rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
- rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
+ if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
+ rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
+ rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
+ } else {
+ rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
+ rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
+ }
}
/*
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index 5d15607027e9..cb105563bde7 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -20,6 +20,8 @@
#include <linux/rtsx_pci.h>
#include <linux/mmc/card.h>
#include <asm/unaligned.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include "rtsx_pcr.h"
#include "rts5261.h"
@@ -89,9 +91,16 @@ static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr, bool enable)
if (pcr->aspm_enabled == enable)
return;
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC,
- enable ? pcr->aspm_en : 0);
+ if (pcr->aspm_en & 0x02)
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
+ FORCE_ASPM_CTL1, enable ? 0 : FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
+ else
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
+ FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
+
+ if (!enable && (pcr->aspm_en & 0x02))
+ mdelay(10);
+
pcr->aspm_enabled = enable;
}
@@ -143,6 +152,9 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
/* If pci device removed, don't queue idle work any more */
if (pcr->remove_pci)
return;
+ if (pcr->rtd3_en)
+ if (pcr->pci->dev.power.usage_count.counter == 0)
+ pm_runtime_get(&(pcr->pci->dev));
if (pcr->state != PDEV_STAT_RUN) {
pcr->state = PDEV_STAT_RUN;
@@ -1075,6 +1087,19 @@ static void rtsx_pm_power_saving(struct rtsx_pcr *pcr)
rtsx_comm_pm_power_saving(pcr);
}
+static void rtsx_pci_rtd3_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr, rtd3_work);
+
+ pcr_dbg(pcr, "--> %s\n", __func__);
+
+ while (pcr->pci->dev.power.usage_count.counter > 0) {
+ if (pm_runtime_active(&(pcr->pci->dev)))
+ pm_runtime_put(&(pcr->pci->dev));
+ }
+}
+
static void rtsx_pci_idle_work(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
@@ -1094,6 +1119,9 @@ static void rtsx_pci_idle_work(struct work_struct *work)
rtsx_pm_power_saving(pcr);
mutex_unlock(&pcr->pcr_mutex);
+
+ if (pcr->rtd3_en)
+ mod_delayed_work(system_wq, &pcr->rtd3_work, msecs_to_jiffies(10000));
}
static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
@@ -1283,7 +1311,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
/* Wait SSC power stable */
udelay(200);
- rtsx_pci_disable_aspm(pcr);
+ rtsx_disable_aspm(pcr);
if (pcr->ops->optimize_phy) {
err = pcr->ops->optimize_phy(pcr);
if (err < 0)
@@ -1357,8 +1385,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_init_ocp(pcr);
/* Enable clk_request_n to enable clock power management */
- pcie_capability_write_word(pdev, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_CLKREQ_EN);
+ pci_write_config_byte(pdev, PCI_EXP_LNKCTL+1, 0x01);
/* Enter L1 when host tx idle */
pci_write_config_byte(pdev, 0x70F, 0x5B);
@@ -1368,6 +1395,8 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
return err;
}
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30);
+
/* No CD interrupt if probing driver with card inserted.
* So we need to initialize pcr->card_exist here.
*/
@@ -1571,6 +1600,12 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
rtsx_pcr_cells[i].platform_data = handle;
rtsx_pcr_cells[i].pdata_size = sizeof(*handle);
}
+
+ if (pcr->rtd3_en) {
+ INIT_DELAYED_WORK(&pcr->rtd3_work, rtsx_pci_rtd3_work);
+ pm_runtime_enable(&pcidev->dev);
+ }
+
ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
if (ret < 0)
@@ -1610,6 +1645,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
pcr->remove_pci = true;
+ if (pcr->rtd3_en)
+ pm_runtime_get_noresume(&pcr->pci->dev);
+
/* Disable interrupts at the pcr level */
spin_lock_irq(&pcr->lock);
rtsx_pci_writel(pcr, RTSX_BIER, 0);
@@ -1619,6 +1657,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
cancel_delayed_work_sync(&pcr->carddet_work);
cancel_delayed_work_sync(&pcr->idle_work);
+ if (pcr->rtd3_en)
+ cancel_delayed_work_sync(&pcr->rtd3_work);
+
mfd_remove_devices(&pcidev->dev);
dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
@@ -1635,6 +1676,11 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
idr_remove(&rtsx_pci_idr, pcr->id);
spin_unlock(&rtsx_pci_lock);
+ if (pcr->rtd3_en) {
+ pm_runtime_disable(&pcr->pci->dev);
+ pm_runtime_put_noidle(&pcr->pci->dev);
+ }
+
kfree(pcr->slots);
kfree(pcr);
kfree(handle);
@@ -1716,13 +1762,75 @@ static void rtsx_pci_shutdown(struct pci_dev *pcidev)
pci_disable_msi(pcr->pci);
}
+static int rtsx_pci_runtime_suspend(struct device *device)
+{
+ struct pci_dev *pcidev = to_pci_dev(device);
+ struct pcr_handle *handle;
+ struct rtsx_pcr *pcr;
+
+ handle = pci_get_drvdata(pcidev);
+ pcr = handle->pcr;
+ dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+ cancel_delayed_work(&pcr->carddet_work);
+ cancel_delayed_work(&pcr->rtd3_work);
+ cancel_delayed_work(&pcr->idle_work);
+
+ mutex_lock(&pcr->pcr_mutex);
+ rtsx_pci_power_off(pcr, HOST_ENTER_S3);
+
+ free_irq(pcr->irq, (void *)pcr);
+
+ mutex_unlock(&pcr->pcr_mutex);
+
+ return 0;
+}
+
+static int rtsx_pci_runtime_resume(struct device *device)
+{
+ struct pci_dev *pcidev = to_pci_dev(device);
+ struct pcr_handle *handle;
+ struct rtsx_pcr *pcr;
+ int ret = 0;
+
+ handle = pci_get_drvdata(pcidev);
+ pcr = handle->pcr;
+ dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
+
+ mutex_lock(&pcr->pcr_mutex);
+
+ rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
+ rtsx_pci_acquire_irq(pcr);
+ synchronize_irq(pcr->irq);
+
+ if (pcr->ops->fetch_vendor_settings)
+ pcr->ops->fetch_vendor_settings(pcr);
+
+ rtsx_pci_init_hw(pcr);
+
+ if (pcr->slots[RTSX_SD_CARD].p_dev != NULL) {
+ pcr->slots[RTSX_SD_CARD].card_event(
+ pcr->slots[RTSX_SD_CARD].p_dev);
+ }
+
+ schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
+
+ mutex_unlock(&pcr->pcr_mutex);
+ return ret;
+}
+
#else /* CONFIG_PM */
#define rtsx_pci_shutdown NULL
+#define rtsx_pci_runtime_suspend NULL
+#define rtsx_pic_runtime_resume NULL
#endif /* CONFIG_PM */
-static SIMPLE_DEV_PM_OPS(rtsx_pci_pm_ops, rtsx_pci_suspend, rtsx_pci_resume);
+static const struct dev_pm_ops rtsx_pci_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(rtsx_pci_suspend, rtsx_pci_resume)
+ SET_RUNTIME_PM_OPS(rtsx_pci_runtime_suspend, rtsx_pci_runtime_resume, NULL)
+};
static struct pci_driver rtsx_pci_driver = {
.name = DRV_NAME_RTSX_PCI,
diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h
index fe5f4ca0f937..daf057c4eea6 100644
--- a/drivers/misc/cardreader/rtsx_pcr.h
+++ b/drivers/misc/cardreader/rtsx_pcr.h
@@ -90,6 +90,7 @@ static inline u8 map_sd_drive(int idx)
#define rtsx_check_mmc_support(reg) ((reg) & 0x10)
#define rtsx_reg_to_rtd3(reg) ((reg) & 0x02)
+#define rtsx_reg_to_rtd3_uhsii(reg) ((reg) & 0x04)
#define rtsx_reg_to_aspm(reg) (((reg) >> 28) & 0x03)
#define rtsx_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 26) & 0x03)
#define rtsx_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x03)
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index eb395e144207..02f31f4d0944 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -20,6 +20,7 @@
#include <linux/mmc/card.h>
#include <linux/rtsx_pci.h>
#include <asm/unaligned.h>
+#include <linux/pm_runtime.h>
struct realtek_pci_sdmmc {
struct platform_device *pdev;
@@ -953,7 +954,6 @@ static int sd_set_power_mode(struct realtek_pci_sdmmc *host,
unsigned char power_mode)
{
int err;
-
if (power_mode == MMC_POWER_OFF)
err = sd_power_off(host);
else
@@ -1249,7 +1249,7 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
out:
/* Stop toggle SD clock in idle */
- err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
+ rtsx_pci_write_register(pcr, SD_BUS_STAT,
SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
mutex_unlock(&pcr->pcr_mutex);
@@ -1343,6 +1343,7 @@ static void init_extra_caps(struct realtek_pci_sdmmc *host)
static void realtek_init_host(struct realtek_pci_sdmmc *host)
{
struct mmc_host *mmc = host->mmc;
+ struct rtsx_pcr *pcr = host->pcr;
mmc->f_min = 250000;
mmc->f_max = 208000000;
@@ -1350,6 +1351,8 @@ static void realtek_init_host(struct realtek_pci_sdmmc *host)
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
+ if (pcr->rtd3_en)
+ mmc->caps = mmc->caps | MMC_CAP_AGGRESSIVE_PM;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
mmc->max_current_330 = 400;
mmc->max_current_180 = 800;
@@ -1407,6 +1410,12 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
realtek_init_host(host);
+ if (pcr->rtd3_en) {
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
+ pm_runtime_enable(&pdev->dev);
+ }
+
mmc_add_host(mmc);
return 0;
@@ -1426,6 +1435,11 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
pcr->slots[RTSX_SD_CARD].card_event = NULL;
mmc = host->mmc;
+ if (pcr->rtd3_en) {
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ }
+
cancel_work_sync(&host->work);
mutex_lock(&host->host_mutex);
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index 745f5e73f99a..689d955c2246 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -1174,6 +1174,7 @@ struct rtsx_pcr {
struct delayed_work carddet_work;
struct delayed_work idle_work;
+ struct delayed_work rtd3_work;
spinlock_t lock;
struct mutex pcr_mutex;
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] misc: rtsx: rts5249 support runtime PM
2020-11-24 6:02 [PATCH] misc: rtsx: rts5249 support runtime PM ricky_wu
@ 2020-11-24 20:49 ` Bjorn Helgaas
2020-11-25 14:04 ` Rafael J. Wysocki
0 siblings, 1 reply; 6+ messages in thread
From: Bjorn Helgaas @ 2020-11-24 20:49 UTC (permalink / raw)
To: ricky_wu
Cc: arnd, gregkh, ulf.hansson, bhelgaas, vaibhavgupta40, kdlnx,
dianders, rmfrfs, lee.jones, linux-kernel, linux-mmc,
Rafael J. Wysocki, linux-pm
[+cc Rafael, linux-pm for runtime PM question below]
On Tue, Nov 24, 2020 at 02:02:02PM +0800, ricky_wu@realtek.com wrote:
> From: Ricky Wu <ricky_wu@realtek.com>
>
> rtsx_pci_sdmmc: add to support autosuspend when the rtd3_en is set
>
> rtsx_pcr: add callback functions about runtime PM
> add delay_work(rtd3_work) to decrease usage count to 0 when staying
> at idle over 10 sec
>
> rts5249: add extra flow at init function to support wakeup from d3
> and set rtd3_en from register setting
This looks like several patches that should be split up. The ASPM
changes should be unrelated to runtime PM.
> Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
> ---
> drivers/misc/cardreader/rts5249.c | 25 ++++--
> drivers/misc/cardreader/rtsx_pcr.c | 122 +++++++++++++++++++++++++++--
> drivers/misc/cardreader/rtsx_pcr.h | 1 +
> drivers/mmc/host/rtsx_pci_sdmmc.c | 18 ++++-
> include/linux/rtsx_pci.h | 1 +
> 5 files changed, 152 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/misc/cardreader/rts5249.c b/drivers/misc/cardreader/rts5249.c
> index b85279f1fc5e..1da3b1ca1121 100644
> --- a/drivers/misc/cardreader/rts5249.c
> +++ b/drivers/misc/cardreader/rts5249.c
> @@ -65,7 +65,6 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> pcr_dbg(pcr, "skip fetch vendor setting\n");
> return;
> }
> -
Doesn't look like an improvement to me.
> pcr->aspm_en = rtsx_reg_to_aspm(reg);
> pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> pcr->card_drive_sel &= 0x3F;
> @@ -73,6 +72,8 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
>
> pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
> pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
> +
> + pcr->rtd3_en = rtsx_reg_to_rtd3_uhsii(reg);
> if (rtsx_check_mmc_support(reg))
> pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
> pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
> @@ -278,13 +279,25 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
>
> rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
>
> - if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A))
> rtsx_pci_write_register(pcr, REG_VREF, PWD_SUSPND_EN, PWD_SUSPND_EN);
> - rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
> - rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
> +
> + if (pcr->rtd3_en) {
> + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x01);
> + rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x30);
> + } else {
> + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x01);
> + rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x33);
> + }
> } else {
> - rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
> - rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
> + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
> + rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
> + } else {
> + rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
> + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
> + }
> }
>
> /*
> diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
> index 5d15607027e9..cb105563bde7 100644
> --- a/drivers/misc/cardreader/rtsx_pcr.c
> +++ b/drivers/misc/cardreader/rtsx_pcr.c
> @@ -20,6 +20,8 @@
> #include <linux/rtsx_pci.h>
> #include <linux/mmc/card.h>
> #include <asm/unaligned.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
>
> #include "rtsx_pcr.h"
> #include "rts5261.h"
> @@ -89,9 +91,16 @@ static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr, bool enable)
> if (pcr->aspm_enabled == enable)
> return;
>
> - pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
> - PCI_EXP_LNKCTL_ASPMC,
> - enable ? pcr->aspm_en : 0);
> + if (pcr->aspm_en & 0x02)
> + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
> + FORCE_ASPM_CTL1, enable ? 0 : FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
> + else
> + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
> + FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
> +
> + if (!enable && (pcr->aspm_en & 0x02))
> + mdelay(10);
This is a significant change that should be in its own patch and
explained. Previously we did standard PCI config reads/writes to the
PCIe Link Control register. After this change we'll use
rtsx_pci_write_register(), which looks like it writes to an MMIO
register in a BAR:
rtsx_pci_probe
pcr->remap_addr = ioremap(base, len)
rtsx_pci_write_register
rtsx_pci_writel(pcr, RTSX_HAIMR, val)
iowrite32(val, pcr->remap_addr + reg)
It's not clear that the MMIO register in the BAR is the same as the
one in config space. And we still write the Link Control register in
config space below and other places. How are these supposed to be
coordinated?
Drivers should not change ASPM configuration directly. Especially not
in obfuscated ways like this.
> pcr->aspm_enabled = enable;
> }
> @@ -143,6 +152,9 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
> /* If pci device removed, don't queue idle work any more */
> if (pcr->remove_pci)
> return;
> + if (pcr->rtd3_en)
> + if (pcr->pci->dev.power.usage_count.counter == 0)
> + pm_runtime_get(&(pcr->pci->dev));
>
> if (pcr->state != PDEV_STAT_RUN) {
> pcr->state = PDEV_STAT_RUN;
> @@ -1075,6 +1087,19 @@ static void rtsx_pm_power_saving(struct rtsx_pcr *pcr)
> rtsx_comm_pm_power_saving(pcr);
> }
>
> +static void rtsx_pci_rtd3_work(struct work_struct *work)
> +{
> + struct delayed_work *dwork = to_delayed_work(work);
> + struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr, rtd3_work);
> +
> + pcr_dbg(pcr, "--> %s\n", __func__);
> +
> + while (pcr->pci->dev.power.usage_count.counter > 0) {
> + if (pm_runtime_active(&(pcr->pci->dev)))
> + pm_runtime_put(&(pcr->pci->dev));
I'm not a runtime PM expert, but this looks fishy. AFAICT this is the
only driver in the tree that uses usage_count.counter this way, which
is a pretty big hint that this needs a closer look. Cc'd Rafael.
> + }
> +}
> +
> static void rtsx_pci_idle_work(struct work_struct *work)
> {
> struct delayed_work *dwork = to_delayed_work(work);
> @@ -1094,6 +1119,9 @@ static void rtsx_pci_idle_work(struct work_struct *work)
> rtsx_pm_power_saving(pcr);
>
> mutex_unlock(&pcr->pcr_mutex);
> +
> + if (pcr->rtd3_en)
> + mod_delayed_work(system_wq, &pcr->rtd3_work, msecs_to_jiffies(10000));
> }
>
> static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> @@ -1283,7 +1311,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> /* Wait SSC power stable */
> udelay(200);
>
> - rtsx_pci_disable_aspm(pcr);
> + rtsx_disable_aspm(pcr);
> if (pcr->ops->optimize_phy) {
> err = pcr->ops->optimize_phy(pcr);
> if (err < 0)
> @@ -1357,8 +1385,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> rtsx_pci_init_ocp(pcr);
>
> /* Enable clk_request_n to enable clock power management */
> - pcie_capability_write_word(pdev, PCI_EXP_LNKCTL,
> - PCI_EXP_LNKCTL_CLKREQ_EN);
> + pci_write_config_byte(pdev, PCI_EXP_LNKCTL+1, 0x01);
Drivers should not write PCI_EXP_LNKCTL directly because that clobbers
things done by the PCI core, e.g., ASPM and common clock
configuration, Read Completion Boundary setting, etc.
But if you must, you should at least use this:
pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, 0,
PCI_EXP_LNKCTL_CLKREQ_EN);
> /* Enter L1 when host tx idle */
> pci_write_config_byte(pdev, 0x70F, 0x5B);
>
> @@ -1368,6 +1395,8 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> return err;
> }
>
> + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30);
> +
> /* No CD interrupt if probing driver with card inserted.
> * So we need to initialize pcr->card_exist here.
> */
> @@ -1571,6 +1600,12 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
> rtsx_pcr_cells[i].platform_data = handle;
> rtsx_pcr_cells[i].pdata_size = sizeof(*handle);
> }
> +
> + if (pcr->rtd3_en) {
> + INIT_DELAYED_WORK(&pcr->rtd3_work, rtsx_pci_rtd3_work);
> + pm_runtime_enable(&pcidev->dev);
> + }
> +
> ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
> ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
> if (ret < 0)
> @@ -1610,6 +1645,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
>
> pcr->remove_pci = true;
>
> + if (pcr->rtd3_en)
> + pm_runtime_get_noresume(&pcr->pci->dev);
> +
> /* Disable interrupts at the pcr level */
> spin_lock_irq(&pcr->lock);
> rtsx_pci_writel(pcr, RTSX_BIER, 0);
> @@ -1619,6 +1657,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
> cancel_delayed_work_sync(&pcr->carddet_work);
> cancel_delayed_work_sync(&pcr->idle_work);
>
> + if (pcr->rtd3_en)
> + cancel_delayed_work_sync(&pcr->rtd3_work);
> +
> mfd_remove_devices(&pcidev->dev);
>
> dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
> @@ -1635,6 +1676,11 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
> idr_remove(&rtsx_pci_idr, pcr->id);
> spin_unlock(&rtsx_pci_lock);
>
> + if (pcr->rtd3_en) {
> + pm_runtime_disable(&pcr->pci->dev);
> + pm_runtime_put_noidle(&pcr->pci->dev);
> + }
> +
> kfree(pcr->slots);
> kfree(pcr);
> kfree(handle);
> @@ -1716,13 +1762,75 @@ static void rtsx_pci_shutdown(struct pci_dev *pcidev)
> pci_disable_msi(pcr->pci);
> }
>
> +static int rtsx_pci_runtime_suspend(struct device *device)
> +{
> + struct pci_dev *pcidev = to_pci_dev(device);
> + struct pcr_handle *handle;
> + struct rtsx_pcr *pcr;
> +
> + handle = pci_get_drvdata(pcidev);
> + pcr = handle->pcr;
> + dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
> +
> + cancel_delayed_work(&pcr->carddet_work);
> + cancel_delayed_work(&pcr->rtd3_work);
> + cancel_delayed_work(&pcr->idle_work);
> +
> + mutex_lock(&pcr->pcr_mutex);
> + rtsx_pci_power_off(pcr, HOST_ENTER_S3);
> +
> + free_irq(pcr->irq, (void *)pcr);
> +
> + mutex_unlock(&pcr->pcr_mutex);
> +
> + return 0;
> +}
> +
> +static int rtsx_pci_runtime_resume(struct device *device)
> +{
> + struct pci_dev *pcidev = to_pci_dev(device);
> + struct pcr_handle *handle;
> + struct rtsx_pcr *pcr;
> + int ret = 0;
> +
> + handle = pci_get_drvdata(pcidev);
> + pcr = handle->pcr;
> + dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
> +
> + mutex_lock(&pcr->pcr_mutex);
> +
> + rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
> + rtsx_pci_acquire_irq(pcr);
> + synchronize_irq(pcr->irq);
> +
> + if (pcr->ops->fetch_vendor_settings)
> + pcr->ops->fetch_vendor_settings(pcr);
> +
> + rtsx_pci_init_hw(pcr);
> +
> + if (pcr->slots[RTSX_SD_CARD].p_dev != NULL) {
> + pcr->slots[RTSX_SD_CARD].card_event(
> + pcr->slots[RTSX_SD_CARD].p_dev);
> + }
> +
> + schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
> +
> + mutex_unlock(&pcr->pcr_mutex);
> + return ret;
> +}
> +
> #else /* CONFIG_PM */
>
> #define rtsx_pci_shutdown NULL
> +#define rtsx_pci_runtime_suspend NULL
> +#define rtsx_pic_runtime_resume NULL
>
> #endif /* CONFIG_PM */
>
> -static SIMPLE_DEV_PM_OPS(rtsx_pci_pm_ops, rtsx_pci_suspend, rtsx_pci_resume);
> +static const struct dev_pm_ops rtsx_pci_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(rtsx_pci_suspend, rtsx_pci_resume)
> + SET_RUNTIME_PM_OPS(rtsx_pci_runtime_suspend, rtsx_pci_runtime_resume, NULL)
> +};
>
> static struct pci_driver rtsx_pci_driver = {
> .name = DRV_NAME_RTSX_PCI,
> diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h
> index fe5f4ca0f937..daf057c4eea6 100644
> --- a/drivers/misc/cardreader/rtsx_pcr.h
> +++ b/drivers/misc/cardreader/rtsx_pcr.h
> @@ -90,6 +90,7 @@ static inline u8 map_sd_drive(int idx)
>
> #define rtsx_check_mmc_support(reg) ((reg) & 0x10)
> #define rtsx_reg_to_rtd3(reg) ((reg) & 0x02)
> +#define rtsx_reg_to_rtd3_uhsii(reg) ((reg) & 0x04)
> #define rtsx_reg_to_aspm(reg) (((reg) >> 28) & 0x03)
> #define rtsx_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 26) & 0x03)
> #define rtsx_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x03)
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index eb395e144207..02f31f4d0944 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -20,6 +20,7 @@
> #include <linux/mmc/card.h>
> #include <linux/rtsx_pci.h>
> #include <asm/unaligned.h>
> +#include <linux/pm_runtime.h>
>
> struct realtek_pci_sdmmc {
> struct platform_device *pdev;
> @@ -953,7 +954,6 @@ static int sd_set_power_mode(struct realtek_pci_sdmmc *host,
> unsigned char power_mode)
> {
> int err;
> -
Not an improvement. Looks like accidental whitespace change. But if
you wanted to improve this function, you could (in a separate patch)
make it look like this:
static int sd_set_power_mode(...)
{
if (power_mode == MMC_POWER_OFF)
return sd_power_off(host);
else
return sd_power_on(host);
}
> if (power_mode == MMC_POWER_OFF)
> err = sd_power_off(host);
> else
> @@ -1249,7 +1249,7 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
>
> out:
> /* Stop toggle SD clock in idle */
> - err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
> + rtsx_pci_write_register(pcr, SD_BUS_STAT,
> SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
>
> mutex_unlock(&pcr->pcr_mutex);
> @@ -1343,6 +1343,7 @@ static void init_extra_caps(struct realtek_pci_sdmmc *host)
> static void realtek_init_host(struct realtek_pci_sdmmc *host)
> {
> struct mmc_host *mmc = host->mmc;
> + struct rtsx_pcr *pcr = host->pcr;
>
> mmc->f_min = 250000;
> mmc->f_max = 208000000;
> @@ -1350,6 +1351,8 @@ static void realtek_init_host(struct realtek_pci_sdmmc *host)
> mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
> MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
> MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
> + if (pcr->rtd3_en)
> + mmc->caps = mmc->caps | MMC_CAP_AGGRESSIVE_PM;
> mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
> mmc->max_current_330 = 400;
> mmc->max_current_180 = 800;
> @@ -1407,6 +1410,12 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
>
> realtek_init_host(host);
>
> + if (pcr->rtd3_en) {
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
I think you should swap the order of these so the delay is set first.
Maybe it doesn't matter because both are before pm_runtime_enable(),
but it's always good style to set parameters before enabling a
feature.
> + pm_runtime_enable(&pdev->dev);
> + }
> +
> mmc_add_host(mmc);
>
> return 0;
> @@ -1426,6 +1435,11 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
> pcr->slots[RTSX_SD_CARD].card_event = NULL;
> mmc = host->mmc;
>
> + if (pcr->rtd3_en) {
> + pm_runtime_dont_use_autosuspend(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> + }
> +
> cancel_work_sync(&host->work);
>
> mutex_lock(&host->host_mutex);
> diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
> index 745f5e73f99a..689d955c2246 100644
> --- a/include/linux/rtsx_pci.h
> +++ b/include/linux/rtsx_pci.h
> @@ -1174,6 +1174,7 @@ struct rtsx_pcr {
>
> struct delayed_work carddet_work;
> struct delayed_work idle_work;
> + struct delayed_work rtd3_work;
>
> spinlock_t lock;
> struct mutex pcr_mutex;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] misc: rtsx: rts5249 support runtime PM
2020-11-24 20:49 ` Bjorn Helgaas
@ 2020-11-25 14:04 ` Rafael J. Wysocki
2020-11-26 3:07 ` 吳昊澄 Ricky
0 siblings, 1 reply; 6+ messages in thread
From: Rafael J. Wysocki @ 2020-11-25 14:04 UTC (permalink / raw)
To: Bjorn Helgaas, ricky_wu
Cc: Arnd Bergmann, Greg Kroah-Hartman, Ulf Hansson, Bjorn Helgaas,
vaibhavgupta40, kdlnx, Doug Anderson, rmfrfs, Lee Jones,
Linux Kernel Mailing List, linux-mmc, Rafael J. Wysocki,
Linux PM
On Tue, Nov 24, 2020 at 9:49 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> [+cc Rafael, linux-pm for runtime PM question below]
>
> On Tue, Nov 24, 2020 at 02:02:02PM +0800, ricky_wu@realtek.com wrote:
> > From: Ricky Wu <ricky_wu@realtek.com>
> >
> > rtsx_pci_sdmmc: add to support autosuspend when the rtd3_en is set
> >
> > rtsx_pcr: add callback functions about runtime PM
> > add delay_work(rtd3_work) to decrease usage count to 0 when staying
> > at idle over 10 sec
> >
> > rts5249: add extra flow at init function to support wakeup from d3
> > and set rtd3_en from register setting
>
> This looks like several patches that should be split up. The ASPM
> changes should be unrelated to runtime PM.
>
> > Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
> > ---
> > drivers/misc/cardreader/rts5249.c | 25 ++++--
> > drivers/misc/cardreader/rtsx_pcr.c | 122 +++++++++++++++++++++++++++--
> > drivers/misc/cardreader/rtsx_pcr.h | 1 +
> > drivers/mmc/host/rtsx_pci_sdmmc.c | 18 ++++-
> > include/linux/rtsx_pci.h | 1 +
> > 5 files changed, 152 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/misc/cardreader/rts5249.c b/drivers/misc/cardreader/rts5249.c
> > index b85279f1fc5e..1da3b1ca1121 100644
> > --- a/drivers/misc/cardreader/rts5249.c
> > +++ b/drivers/misc/cardreader/rts5249.c
> > @@ -65,7 +65,6 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> > pcr_dbg(pcr, "skip fetch vendor setting\n");
> > return;
> > }
> > -
>
> Doesn't look like an improvement to me.
+1
> > pcr->aspm_en = rtsx_reg_to_aspm(reg);
> > pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> > pcr->card_drive_sel &= 0x3F;
> > @@ -73,6 +72,8 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
> >
> > pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
> > pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
> > +
> > + pcr->rtd3_en = rtsx_reg_to_rtd3_uhsii(reg);
> > if (rtsx_check_mmc_support(reg))
> > pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
> > pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
> > @@ -278,13 +279,25 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
> >
> > rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
> >
> > - if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A))
> > rtsx_pci_write_register(pcr, REG_VREF, PWD_SUSPND_EN, PWD_SUSPND_EN);
> > - rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
> > - rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
> > +
> > + if (pcr->rtd3_en) {
> > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> > + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x01);
> > + rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x30);
> > + } else {
> > + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x01);
> > + rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x33);
> > + }
> > } else {
> > - rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
> > - rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
> > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> > + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01, 0x00);
> > + rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL, 0x30, 0x20);
> > + } else {
> > + rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
> > + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
> > + }
> > }
> >
> > /*
> > diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
> > index 5d15607027e9..cb105563bde7 100644
> > --- a/drivers/misc/cardreader/rtsx_pcr.c
> > +++ b/drivers/misc/cardreader/rtsx_pcr.c
> > @@ -20,6 +20,8 @@
> > #include <linux/rtsx_pci.h>
> > #include <linux/mmc/card.h>
> > #include <asm/unaligned.h>
> > +#include <linux/pm.h>
> > +#include <linux/pm_runtime.h>
> >
> > #include "rtsx_pcr.h"
> > #include "rts5261.h"
> > @@ -89,9 +91,16 @@ static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr, bool enable)
> > if (pcr->aspm_enabled == enable)
> > return;
> >
> > - pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
> > - PCI_EXP_LNKCTL_ASPMC,
> > - enable ? pcr->aspm_en : 0);
> > + if (pcr->aspm_en & 0x02)
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
> > + FORCE_ASPM_CTL1, enable ? 0 : FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
> > + else
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
> > + FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
> > +
> > + if (!enable && (pcr->aspm_en & 0x02))
> > + mdelay(10);
>
> This is a significant change that should be in its own patch and
> explained. Previously we did standard PCI config reads/writes to the
> PCIe Link Control register. After this change we'll use
> rtsx_pci_write_register(), which looks like it writes to an MMIO
> register in a BAR:
>
> rtsx_pci_probe
> pcr->remap_addr = ioremap(base, len)
>
> rtsx_pci_write_register
> rtsx_pci_writel(pcr, RTSX_HAIMR, val)
> iowrite32(val, pcr->remap_addr + reg)
>
> It's not clear that the MMIO register in the BAR is the same as the
> one in config space. And we still write the Link Control register in
> config space below and other places. How are these supposed to be
> coordinated?
>
> Drivers should not change ASPM configuration directly. Especially not
> in obfuscated ways like this.
Indeed.
> > pcr->aspm_enabled = enable;
> > }
> > @@ -143,6 +152,9 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
> > /* If pci device removed, don't queue idle work any more */
> > if (pcr->remove_pci)
> > return;
> > + if (pcr->rtd3_en)
> > + if (pcr->pci->dev.power.usage_count.counter == 0)
> > + pm_runtime_get(&(pcr->pci->dev));
> >
> > if (pcr->state != PDEV_STAT_RUN) {
> > pcr->state = PDEV_STAT_RUN;
> > @@ -1075,6 +1087,19 @@ static void rtsx_pm_power_saving(struct rtsx_pcr *pcr)
> > rtsx_comm_pm_power_saving(pcr);
> > }
> >
> > +static void rtsx_pci_rtd3_work(struct work_struct *work)
> > +{
> > + struct delayed_work *dwork = to_delayed_work(work);
> > + struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr, rtd3_work);
> > +
> > + pcr_dbg(pcr, "--> %s\n", __func__);
> > +
> > + while (pcr->pci->dev.power.usage_count.counter > 0) {
> > + if (pm_runtime_active(&(pcr->pci->dev)))
> > + pm_runtime_put(&(pcr->pci->dev));
>
> I'm not a runtime PM expert, but this looks fishy. AFAICT this is the
> only driver in the tree that uses usage_count.counter this way, which
> is a pretty big hint that this needs a closer look. Cc'd Rafael.
You are right, this is not correct from the PM-runtime POV.
It looks like this attempts to force the PM-runtime usage counter down
to 0 and it's kind of hard to say why this is done (and it shouldn't
be done in the first place, because it destroys the usage counter
balance).
Ricky, is this an attempt to work around an issue of some sort?
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] misc: rtsx: rts5249 support runtime PM
2020-11-25 14:04 ` Rafael J. Wysocki
@ 2020-11-26 3:07 ` 吳昊澄 Ricky
2020-11-26 14:19 ` Rafael J. Wysocki
0 siblings, 1 reply; 6+ messages in thread
From: 吳昊澄 Ricky @ 2020-11-26 3:07 UTC (permalink / raw)
To: Rafael J. Wysocki, Bjorn Helgaas
Cc: Arnd Bergmann, Greg Kroah-Hartman, Ulf Hansson, Bjorn Helgaas,
vaibhavgupta40, kdlnx, Doug Anderson, rmfrfs, Lee Jones,
Linux Kernel Mailing List, linux-mmc, Rafael J. Wysocki,
Linux PM
> -----Original Message-----
> From: Rafael J. Wysocki [mailto:rafael@kernel.org]
> Sent: Wednesday, November 25, 2020 10:04 PM
> To: Bjorn Helgaas; 吳昊澄 Ricky
> Cc: Arnd Bergmann; Greg Kroah-Hartman; Ulf Hansson; Bjorn Helgaas;
> vaibhavgupta40@gmail.com; kdlnx@doth.eu; Doug Anderson;
> rmfrfs@gmail.com; Lee Jones; Linux Kernel Mailing List; linux-mmc; Rafael J.
> Wysocki; Linux PM
> Subject: Re: [PATCH] misc: rtsx: rts5249 support runtime PM
>
> On Tue, Nov 24, 2020 at 9:49 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
> >
> > [+cc Rafael, linux-pm for runtime PM question below]
> >
> > On Tue, Nov 24, 2020 at 02:02:02PM +0800, ricky_wu@realtek.com wrote:
> > > From: Ricky Wu <ricky_wu@realtek.com>
> > >
> > > rtsx_pci_sdmmc: add to support autosuspend when the rtd3_en is set
> > >
> > > rtsx_pcr: add callback functions about runtime PM
> > > add delay_work(rtd3_work) to decrease usage count to 0 when staying
> > > at idle over 10 sec
> > >
> > > rts5249: add extra flow at init function to support wakeup from d3
> > > and set rtd3_en from register setting
> >
> > This looks like several patches that should be split up. The ASPM
> > changes should be unrelated to runtime PM.
> >
Thanks for your reply..
Ok I will split up ASPM changes and runtime PM
> > > Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
> > > ---
> > > drivers/misc/cardreader/rts5249.c | 25 ++++--
> > > drivers/misc/cardreader/rtsx_pcr.c | 122
> +++++++++++++++++++++++++++--
> > > drivers/misc/cardreader/rtsx_pcr.h | 1 +
> > > drivers/mmc/host/rtsx_pci_sdmmc.c | 18 ++++-
> > > include/linux/rtsx_pci.h | 1 +
> > > 5 files changed, 152 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/misc/cardreader/rts5249.c
> b/drivers/misc/cardreader/rts5249.c
> > > index b85279f1fc5e..1da3b1ca1121 100644
> > > --- a/drivers/misc/cardreader/rts5249.c
> > > +++ b/drivers/misc/cardreader/rts5249.c
> > > @@ -65,7 +65,6 @@ static void rtsx_base_fetch_vendor_settings(struct
> rtsx_pcr *pcr)
> > > pcr_dbg(pcr, "skip fetch vendor setting\n");
> > > return;
> > > }
> > > -
> >
> > Doesn't look like an improvement to me.
>
> +1
>
> > > pcr->aspm_en = rtsx_reg_to_aspm(reg);
> > > pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
> > > pcr->card_drive_sel &= 0x3F;
> > > @@ -73,6 +72,8 @@ static void rtsx_base_fetch_vendor_settings(struct
> rtsx_pcr *pcr)
> > >
> > > pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
> > > pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
> > > +
> > > + pcr->rtd3_en = rtsx_reg_to_rtd3_uhsii(reg);
> > > if (rtsx_check_mmc_support(reg))
> > > pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
> > > pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
> > > @@ -278,13 +279,25 @@ static int rts5249_extra_init_hw(struct rtsx_pcr
> *pcr)
> > >
> > > rtsx_pci_send_cmd(pcr, CMD_TIMEOUT_DEF);
> > >
> > > - if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A)) {
> > > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr, PID_525A))
> > > rtsx_pci_write_register(pcr, REG_VREF, PWD_SUSPND_EN,
> PWD_SUSPND_EN);
> > > - rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3, 0x01,
> 0x00);
> > > - rtsx_pci_write_register(pcr, RTS524A_PME_FORCE_CTL,
> 0x30, 0x20);
> > > +
> > > + if (pcr->rtd3_en) {
> > > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr,
> PID_525A)) {
> > > + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> 0x01, 0x01);
> > > + rtsx_pci_write_register(pcr,
> RTS524A_PME_FORCE_CTL, 0x30, 0x30);
> > > + } else {
> > > + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01,
> 0x01);
> > > + rtsx_pci_write_register(pcr, PME_FORCE_CTL,
> 0xFF, 0x33);
> > > + }
> > > } else {
> > > - rtsx_pci_write_register(pcr, PME_FORCE_CTL, 0xFF, 0x30);
> > > - rtsx_pci_write_register(pcr, PM_CTRL3, 0x01, 0x00);
> > > + if (CHK_PCI_PID(pcr, PID_524A) || CHK_PCI_PID(pcr,
> PID_525A)) {
> > > + rtsx_pci_write_register(pcr, RTS524A_PM_CTRL3,
> 0x01, 0x00);
> > > + rtsx_pci_write_register(pcr,
> RTS524A_PME_FORCE_CTL, 0x30, 0x20);
> > > + } else {
> > > + rtsx_pci_write_register(pcr, PME_FORCE_CTL,
> 0xFF, 0x30);
> > > + rtsx_pci_write_register(pcr, PM_CTRL3, 0x01,
> 0x00);
> > > + }
> > > }
> > >
> > > /*
> > > diff --git a/drivers/misc/cardreader/rtsx_pcr.c
> b/drivers/misc/cardreader/rtsx_pcr.c
> > > index 5d15607027e9..cb105563bde7 100644
> > > --- a/drivers/misc/cardreader/rtsx_pcr.c
> > > +++ b/drivers/misc/cardreader/rtsx_pcr.c
> > > @@ -20,6 +20,8 @@
> > > #include <linux/rtsx_pci.h>
> > > #include <linux/mmc/card.h>
> > > #include <asm/unaligned.h>
> > > +#include <linux/pm.h>
> > > +#include <linux/pm_runtime.h>
> > >
> > > #include "rtsx_pcr.h"
> > > #include "rts5261.h"
> > > @@ -89,9 +91,16 @@ static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr,
> bool enable)
> > > if (pcr->aspm_enabled == enable)
> > > return;
> > >
> > > - pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
> > > - PCI_EXP_LNKCTL_ASPMC,
> > > - enable ? pcr->aspm_en :
> 0);
> > > + if (pcr->aspm_en & 0x02)
> > > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL,
> FORCE_ASPM_CTL0 |
> > > + FORCE_ASPM_CTL1, enable ? 0 :
> FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1);
> > > + else
> > > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL,
> FORCE_ASPM_CTL0 |
> > > + FORCE_ASPM_CTL1, FORCE_ASPM_CTL0 |
> FORCE_ASPM_CTL1);
> > > +
> > > + if (!enable && (pcr->aspm_en & 0x02))
> > > + mdelay(10);
> >
> > This is a significant change that should be in its own patch and
> > explained. Previously we did standard PCI config reads/writes to the
> > PCIe Link Control register. After this change we'll use
> > rtsx_pci_write_register(), which looks like it writes to an MMIO
> > register in a BAR:
> >
> > rtsx_pci_probe
> > pcr->remap_addr = ioremap(base, len)
> >
> > rtsx_pci_write_register
> > rtsx_pci_writel(pcr, RTSX_HAIMR, val)
> > iowrite32(val, pcr->remap_addr + reg)
> >
> > It's not clear that the MMIO register in the BAR is the same as the
> > one in config space. And we still write the Link Control register in
> > config space below and other places. How are these supposed to be
> > coordinated?
> >
> > Drivers should not change ASPM configuration directly. Especially not
> > in obfuscated ways like this.
>
> Indeed.
>
We used this write register to disable/enable ASPM for our IC,
we don't want to enter ASPM when IC in R/W time and initial time so we need to write this register
and we think this way not conflict the " Drivers should not change ASPM configuration directly "
so we remove pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL...) to follow not change ASPM configuration directly
> > > pcr->aspm_enabled = enable;
> > > }
> > > @@ -143,6 +152,9 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
> > > /* If pci device removed, don't queue idle work any more */
> > > if (pcr->remove_pci)
> > > return;
> > > + if (pcr->rtd3_en)
> > > + if (pcr->pci->dev.power.usage_count.counter == 0)
> > > + pm_runtime_get(&(pcr->pci->dev));
> > >
> > > if (pcr->state != PDEV_STAT_RUN) {
> > > pcr->state = PDEV_STAT_RUN;
> > > @@ -1075,6 +1087,19 @@ static void rtsx_pm_power_saving(struct
> rtsx_pcr *pcr)
> > > rtsx_comm_pm_power_saving(pcr);
> > > }
> > >
> > > +static void rtsx_pci_rtd3_work(struct work_struct *work)
> > > +{
> > > + struct delayed_work *dwork = to_delayed_work(work);
> > > + struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr,
> rtd3_work);
> > > +
> > > + pcr_dbg(pcr, "--> %s\n", __func__);
> > > +
> > > + while (pcr->pci->dev.power.usage_count.counter > 0) {
> > > + if (pm_runtime_active(&(pcr->pci->dev)))
> > > + pm_runtime_put(&(pcr->pci->dev));
> >
> > I'm not a runtime PM expert, but this looks fishy. AFAICT this is the
> > only driver in the tree that uses usage_count.counter this way, which
> > is a pretty big hint that this needs a closer look. Cc'd Rafael.
>
> You are right, this is not correct from the PM-runtime POV.
>
> It looks like this attempts to force the PM-runtime usage counter down
> to 0 and it's kind of hard to say why this is done (and it shouldn't
> be done in the first place, because it destroys the usage counter
> balance).
>
> Ricky, is this an attempt to work around an issue of some sort?
>
Thanks Bjorn and Rafael
I found when we boot up, our dev pcr->pci->dev.power.usage_count.counter always is 2,
Don’t know how to make it to 0 because we need to support D3 and run runtime_suspended callback function
Is there something wrong with us to enable runtime PM?
> > static void rtsx_pci_idle_work(struct work_struct *work)
> > {
> > struct delayed_work *dwork = to_delayed_work(work);
> > @@ -1094,6 +1119,9 @@ static void rtsx_pci_idle_work(struct work_struct
> *work)
> > rtsx_pm_power_saving(pcr);
> >
> > mutex_unlock(&pcr->pcr_mutex);
> > +
> > + if (pcr->rtd3_en)
> > + mod_delayed_work(system_wq, &pcr->rtd3_work,
> msecs_to_jiffies(10000));
> > }
> >
> > static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> > @@ -1283,7 +1311,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> > /* Wait SSC power stable */
> > udelay(200);
> >
> > - rtsx_pci_disable_aspm(pcr);
> > + rtsx_disable_aspm(pcr);
> > if (pcr->ops->optimize_phy) {
> > err = pcr->ops->optimize_phy(pcr);
> > if (err < 0)
> > @@ -1357,8 +1385,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> > rtsx_pci_init_ocp(pcr);
> >
> > /* Enable clk_request_n to enable clock power management */
> > - pcie_capability_write_word(pdev, PCI_EXP_LNKCTL,
> > - PCI_EXP_LNKCTL_CLKREQ_EN);
> > + pci_write_config_byte(pdev, PCI_EXP_LNKCTL+1, 0x01);
>
> Drivers should not write PCI_EXP_LNKCTL directly because that clobbers
> things done by the PCI core, e.g., ASPM and common clock
> configuration, Read Completion Boundary setting, etc.
>
> But if you must, you should at least use this:
>
> pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, 0,
> PCI_EXP_LNKCTL_CLKREQ_EN);
>
OK thanks for your advice
> > /* Enter L1 when host tx idle */
> > pci_write_config_byte(pdev, 0x70F, 0x5B);
> >
> > @@ -1368,6 +1395,8 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> > return err;
> > }
> >
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0x30, 0x30);
> > +
> > /* No CD interrupt if probing driver with card inserted.
> > * So we need to initialize pcr->card_exist here.
> > */
> > @@ -1571,6 +1600,12 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
> > rtsx_pcr_cells[i].platform_data = handle;
> > rtsx_pcr_cells[i].pdata_size = sizeof(*handle);
> > }
> > +
> > + if (pcr->rtd3_en) {
> > + INIT_DELAYED_WORK(&pcr->rtd3_work, rtsx_pci_rtd3_work);
> > + pm_runtime_enable(&pcidev->dev);
> > + }
> > +
> > ret = mfd_add_devices(&pcidev->dev, pcr->id, rtsx_pcr_cells,
> > ARRAY_SIZE(rtsx_pcr_cells), NULL, 0, NULL);
> > if (ret < 0)
> > @@ -1610,6 +1645,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
> >
> > pcr->remove_pci = true;
> >
> > + if (pcr->rtd3_en)
> > + pm_runtime_get_noresume(&pcr->pci->dev);
> > +
> > /* Disable interrupts at the pcr level */
> > spin_lock_irq(&pcr->lock);
> > rtsx_pci_writel(pcr, RTSX_BIER, 0);
> > @@ -1619,6 +1657,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
> > cancel_delayed_work_sync(&pcr->carddet_work);
> > cancel_delayed_work_sync(&pcr->idle_work);
> >
> > + if (pcr->rtd3_en)
> > + cancel_delayed_work_sync(&pcr->rtd3_work);
> > +
> > mfd_remove_devices(&pcidev->dev);
> >
> > dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
> > @@ -1635,6 +1676,11 @@ static void rtsx_pci_remove(struct pci_dev
> *pcidev)
> > idr_remove(&rtsx_pci_idr, pcr->id);
> > spin_unlock(&rtsx_pci_lock);
> >
> > + if (pcr->rtd3_en) {
> > + pm_runtime_disable(&pcr->pci->dev);
> > + pm_runtime_put_noidle(&pcr->pci->dev);
> > + }
> > +
> > kfree(pcr->slots);
> > kfree(pcr);
> > kfree(handle);
> > @@ -1716,13 +1762,75 @@ static void rtsx_pci_shutdown(struct pci_dev
> *pcidev)
> > pci_disable_msi(pcr->pci);
> > }
> >
> > +static int rtsx_pci_runtime_suspend(struct device *device)
> > +{
> > + struct pci_dev *pcidev = to_pci_dev(device);
> > + struct pcr_handle *handle;
> > + struct rtsx_pcr *pcr;
> > +
> > + handle = pci_get_drvdata(pcidev);
> > + pcr = handle->pcr;
> > + dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
> > +
> > + cancel_delayed_work(&pcr->carddet_work);
> > + cancel_delayed_work(&pcr->rtd3_work);
> > + cancel_delayed_work(&pcr->idle_work);
> > +
> > + mutex_lock(&pcr->pcr_mutex);
> > + rtsx_pci_power_off(pcr, HOST_ENTER_S3);
> > +
> > + free_irq(pcr->irq, (void *)pcr);
> > +
> > + mutex_unlock(&pcr->pcr_mutex);
> > +
> > + return 0;
> > +}
> > +
> > +static int rtsx_pci_runtime_resume(struct device *device)
> > +{
> > + struct pci_dev *pcidev = to_pci_dev(device);
> > + struct pcr_handle *handle;
> > + struct rtsx_pcr *pcr;
> > + int ret = 0;
> > +
> > + handle = pci_get_drvdata(pcidev);
> > + pcr = handle->pcr;
> > + dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
> > +
> > + mutex_lock(&pcr->pcr_mutex);
> > +
> > + rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
> > + rtsx_pci_acquire_irq(pcr);
> > + synchronize_irq(pcr->irq);
> > +
> > + if (pcr->ops->fetch_vendor_settings)
> > + pcr->ops->fetch_vendor_settings(pcr);
> > +
> > + rtsx_pci_init_hw(pcr);
> > +
> > + if (pcr->slots[RTSX_SD_CARD].p_dev != NULL) {
> > + pcr->slots[RTSX_SD_CARD].card_event(
> > + pcr->slots[RTSX_SD_CARD].p_dev);
> > + }
> > +
> > + schedule_delayed_work(&pcr->idle_work, msecs_to_jiffies(200));
> > +
> > + mutex_unlock(&pcr->pcr_mutex);
> > + return ret;
> > +}
> > +
> > #else /* CONFIG_PM */
> >
> > #define rtsx_pci_shutdown NULL
> > +#define rtsx_pci_runtime_suspend NULL
> > +#define rtsx_pic_runtime_resume NULL
> >
> > #endif /* CONFIG_PM */
> >
> > -static SIMPLE_DEV_PM_OPS(rtsx_pci_pm_ops, rtsx_pci_suspend,
> rtsx_pci_resume);
> > +static const struct dev_pm_ops rtsx_pci_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(rtsx_pci_suspend, rtsx_pci_resume)
> > + SET_RUNTIME_PM_OPS(rtsx_pci_runtime_suspend,
> rtsx_pci_runtime_resume, NULL)
> > +};
> >
> > static struct pci_driver rtsx_pci_driver = {
> > .name = DRV_NAME_RTSX_PCI,
> > diff --git a/drivers/misc/cardreader/rtsx_pcr.h
> b/drivers/misc/cardreader/rtsx_pcr.h
> > index fe5f4ca0f937..daf057c4eea6 100644
> > --- a/drivers/misc/cardreader/rtsx_pcr.h
> > +++ b/drivers/misc/cardreader/rtsx_pcr.h
> > @@ -90,6 +90,7 @@ static inline u8 map_sd_drive(int idx)
> >
> > #define rtsx_check_mmc_support(reg) ((reg) & 0x10)
> > #define rtsx_reg_to_rtd3(reg) ((reg) & 0x02)
> > +#define rtsx_reg_to_rtd3_uhsii(reg) ((reg) & 0x04)
> > #define rtsx_reg_to_aspm(reg) (((reg) >> 28) & 0x03)
> > #define rtsx_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 26) & 0x03)
> > #define rtsx_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x03)
> > diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c
> b/drivers/mmc/host/rtsx_pci_sdmmc.c
> > index eb395e144207..02f31f4d0944 100644
> > --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> > +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> > @@ -20,6 +20,7 @@
> > #include <linux/mmc/card.h>
> > #include <linux/rtsx_pci.h>
> > #include <asm/unaligned.h>
> > +#include <linux/pm_runtime.h>
> >
> > struct realtek_pci_sdmmc {
> > struct platform_device *pdev;
> > @@ -953,7 +954,6 @@ static int sd_set_power_mode(struct
> realtek_pci_sdmmc *host,
> > unsigned char power_mode)
> > {
> > int err;
> > -
>
> Not an improvement. Looks like accidental whitespace change. But if
> you wanted to improve this function, you could (in a separate patch)
> make it look like this:
>
> static int sd_set_power_mode(...)
> {
> if (power_mode == MMC_POWER_OFF)
> return sd_power_off(host);
> else
> return sd_power_on(host);
> }
>
OK thanks for your advice
> > if (power_mode == MMC_POWER_OFF)
> > err = sd_power_off(host);
> > else
> > @@ -1249,7 +1249,7 @@ static int sdmmc_switch_voltage(struct mmc_host
> *mmc, struct mmc_ios *ios)
> >
> > out:
> > /* Stop toggle SD clock in idle */
> > - err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
> > + rtsx_pci_write_register(pcr, SD_BUS_STAT,
> > SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
> >
> > mutex_unlock(&pcr->pcr_mutex);
> > @@ -1343,6 +1343,7 @@ static void init_extra_caps(struct
> realtek_pci_sdmmc *host)
> > static void realtek_init_host(struct realtek_pci_sdmmc *host)
> > {
> > struct mmc_host *mmc = host->mmc;
> > + struct rtsx_pcr *pcr = host->pcr;
> >
> > mmc->f_min = 250000;
> > mmc->f_max = 208000000;
> > @@ -1350,6 +1351,8 @@ static void realtek_init_host(struct
> realtek_pci_sdmmc *host)
> > mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
> > MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
> > MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
> > + if (pcr->rtd3_en)
> > + mmc->caps = mmc->caps | MMC_CAP_AGGRESSIVE_PM;
> > mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP |
> MMC_CAP2_FULL_PWR_CYCLE;
> > mmc->max_current_330 = 400;
> > mmc->max_current_180 = 800;
> > @@ -1407,6 +1410,12 @@ static int rtsx_pci_sdmmc_drv_probe(struct
> platform_device *pdev)
> >
> > realtek_init_host(host);
> >
> > + if (pcr->rtd3_en) {
> > + pm_runtime_use_autosuspend(&pdev->dev);
> > + pm_runtime_set_autosuspend_delay(&pdev->dev, 5000);
>
> I think you should swap the order of these so the delay is set first.
> Maybe it doesn't matter because both are before pm_runtime_enable(),
> but it's always good style to set parameters before enabling a
> feature.
>
OK thanks for your advice
> > + pm_runtime_enable(&pdev->dev);
> > + }
> > +
> > mmc_add_host(mmc);
> >
> > return 0;
> > @@ -1426,6 +1435,11 @@ static int rtsx_pci_sdmmc_drv_remove(struct
> platform_device *pdev)
> > pcr->slots[RTSX_SD_CARD].card_event = NULL;
> > mmc = host->mmc;
> >
> > + if (pcr->rtd3_en) {
> > + pm_runtime_dont_use_autosuspend(&pdev->dev);
> > + pm_runtime_disable(&pdev->dev);
> > + }
> > +
> > cancel_work_sync(&host->work);
> >
> > mutex_lock(&host->host_mutex);
> > diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
> > index 745f5e73f99a..689d955c2246 100644
> > --- a/include/linux/rtsx_pci.h
> > +++ b/include/linux/rtsx_pci.h
> > @@ -1174,6 +1174,7 @@ struct rtsx_pcr {
> >
> > struct delayed_work carddet_work;
> > struct delayed_work idle_work;
> > + struct delayed_work rtd3_work;
> >
> > spinlock_t lock;
> > struct mutex pcr_mutex;
> > --
> > 2.17.1
> ------Please consider the environment before printing this e-mail.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] misc: rtsx: rts5249 support runtime PM
2020-11-26 3:07 ` 吳昊澄 Ricky
@ 2020-11-26 14:19 ` Rafael J. Wysocki
2020-11-26 15:02 ` Ulf Hansson
0 siblings, 1 reply; 6+ messages in thread
From: Rafael J. Wysocki @ 2020-11-26 14:19 UTC (permalink / raw)
To: 吳昊澄 Ricky
Cc: Rafael J. Wysocki, Bjorn Helgaas, Arnd Bergmann,
Greg Kroah-Hartman, Ulf Hansson, Bjorn Helgaas, vaibhavgupta40,
kdlnx, Doug Anderson, rmfrfs, Lee Jones,
Linux Kernel Mailing List, linux-mmc, Rafael J. Wysocki,
Linux PM
On Thu, Nov 26, 2020 at 4:07 AM 吳昊澄 Ricky <ricky_wu@realtek.com> wrote:
>
> > -----Original Message-----
> > From: Rafael J. Wysocki [mailto:rafael@kernel.org]
> > Sent: Wednesday, November 25, 2020 10:04 PM
> > To: Bjorn Helgaas; 吳昊澄 Ricky
[cut]
> > > > +static void rtsx_pci_rtd3_work(struct work_struct *work)
> > > > +{
> > > > + struct delayed_work *dwork = to_delayed_work(work);
> > > > + struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr,
> > rtd3_work);
> > > > +
> > > > + pcr_dbg(pcr, "--> %s\n", __func__);
> > > > +
> > > > + while (pcr->pci->dev.power.usage_count.counter > 0) {
> > > > + if (pm_runtime_active(&(pcr->pci->dev)))
> > > > + pm_runtime_put(&(pcr->pci->dev));
> > >
> > > I'm not a runtime PM expert, but this looks fishy. AFAICT this is the
> > > only driver in the tree that uses usage_count.counter this way, which
> > > is a pretty big hint that this needs a closer look. Cc'd Rafael.
> >
> > You are right, this is not correct from the PM-runtime POV.
> >
> > It looks like this attempts to force the PM-runtime usage counter down
> > to 0 and it's kind of hard to say why this is done (and it shouldn't
> > be done in the first place, because it destroys the usage counter
> > balance).
> >
> > Ricky, is this an attempt to work around an issue of some sort?
> >
>
> Thanks Bjorn and Rafael
> I found when we boot up, our dev pcr->pci->dev.power.usage_count.counter always is 2,
> Don’t know how to make it to 0 because we need to support D3 and run runtime_suspended callback function
> Is there something wrong with us to enable runtime PM?
That is possible.
If you want it to be enabled by default, you need to call
pm_runtime_allow() from the driver at probe time, in addition to
pm_runtime_enable(), in the first place, but that only drops one
reference, so question is where the other one comes from.
Are the pm_runtime_get*() and pm_runtime_put*() calls balanced?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] misc: rtsx: rts5249 support runtime PM
2020-11-26 14:19 ` Rafael J. Wysocki
@ 2020-11-26 15:02 ` Ulf Hansson
0 siblings, 0 replies; 6+ messages in thread
From: Ulf Hansson @ 2020-11-26 15:02 UTC (permalink / raw)
To: Rafael J. Wysocki, 吳昊澄 Ricky
Cc: Bjorn Helgaas, Arnd Bergmann, Greg Kroah-Hartman, Bjorn Helgaas,
vaibhavgupta40, kdlnx, Doug Anderson, rmfrfs, Lee Jones,
Linux Kernel Mailing List, linux-mmc, Rafael J. Wysocki,
Linux PM
On Thu, 26 Nov 2020 at 15:19, Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Thu, Nov 26, 2020 at 4:07 AM 吳昊澄 Ricky <ricky_wu@realtek.com> wrote:
> >
> > > -----Original Message-----
> > > From: Rafael J. Wysocki [mailto:rafael@kernel.org]
> > > Sent: Wednesday, November 25, 2020 10:04 PM
> > > To: Bjorn Helgaas; 吳昊澄 Ricky
>
> [cut]
>
> > > > > +static void rtsx_pci_rtd3_work(struct work_struct *work)
> > > > > +{
> > > > > + struct delayed_work *dwork = to_delayed_work(work);
> > > > > + struct rtsx_pcr *pcr = container_of(dwork, struct rtsx_pcr,
> > > rtd3_work);
> > > > > +
> > > > > + pcr_dbg(pcr, "--> %s\n", __func__);
> > > > > +
> > > > > + while (pcr->pci->dev.power.usage_count.counter > 0) {
> > > > > + if (pm_runtime_active(&(pcr->pci->dev)))
> > > > > + pm_runtime_put(&(pcr->pci->dev));
> > > >
> > > > I'm not a runtime PM expert, but this looks fishy. AFAICT this is the
> > > > only driver in the tree that uses usage_count.counter this way, which
> > > > is a pretty big hint that this needs a closer look. Cc'd Rafael.
> > >
> > > You are right, this is not correct from the PM-runtime POV.
> > >
> > > It looks like this attempts to force the PM-runtime usage counter down
> > > to 0 and it's kind of hard to say why this is done (and it shouldn't
> > > be done in the first place, because it destroys the usage counter
> > > balance).
> > >
> > > Ricky, is this an attempt to work around an issue of some sort?
> > >
> >
> > Thanks Bjorn and Rafael
> > I found when we boot up, our dev pcr->pci->dev.power.usage_count.counter always is 2,
> > Don’t know how to make it to 0 because we need to support D3 and run runtime_suspended callback function
> > Is there something wrong with us to enable runtime PM?
>
> That is possible.
>
> If you want it to be enabled by default, you need to call
> pm_runtime_allow() from the driver at probe time, in addition to
> pm_runtime_enable(), in the first place, but that only drops one
> reference, so question is where the other one comes from.
Yes, good point.
Moreover, I am wondering whether you also need to deploy support for
runtime PM for the child device (managed by
drivers/mmc/host/rtsx_pci_sdmmc.c driver), as to make the support
complete.
>
> Are the pm_runtime_get*() and pm_runtime_put*() calls balanced?
Perhaps have a look at how the drivers/misc/cardreader/rtsx_usb.c and
drivers/mmc/host/rtsx_usb_sdmmc.c have implemented this could help. I
know it's USB, but it should work quite similar in regards to runtime
PM, I think.
Kind regards
Uffe
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-26 15:03 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-24 6:02 [PATCH] misc: rtsx: rts5249 support runtime PM ricky_wu
2020-11-24 20:49 ` Bjorn Helgaas
2020-11-25 14:04 ` Rafael J. Wysocki
2020-11-26 3:07 ` 吳昊澄 Ricky
2020-11-26 14:19 ` Rafael J. Wysocki
2020-11-26 15:02 ` Ulf Hansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).