* [PATCH v2 2/5] e1000e: Move all s0ix related code into it's own source file
2020-12-02 16:17 [PATCH v2 0/5] Improve s0ix flows for systems i219LM Mario Limonciello
2020-12-02 16:17 ` [PATCH v2 1/5] e1000e: fix S0ix flow to allow S0i3.2 subset entry Mario Limonciello
@ 2020-12-02 16:17 ` Mario Limonciello
2020-12-02 20:11 ` Bjorn Helgaas
2020-12-02 16:17 ` [PATCH v2 3/5] e1000e: Add Dell's Comet Lake systems into s0ix heuristics Mario Limonciello
` (2 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Mario Limonciello @ 2020-12-02 16:17 UTC (permalink / raw)
To: Jeff Kirsher, Tony Nguyen, intel-wired-lan
Cc: linux-kernel, Linux PM, Netdev, Alexander Duyck, Jakub Kicinski,
Sasha Netfin, Aaron Brown, Stefan Assmann, David Miller, darcari,
Yijun.Shen, Perry.Yuan, Mario Limonciello, Yijun Shen
Introduce a flag to indicate the device should be using the s0ix
flows and use this flag to run those functions.
Splitting the code to it's own file will make future heuristics
more self containted.
Tested-by: Yijun Shen <yijun.shen@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
---
drivers/net/ethernet/intel/e1000e/Makefile | 2 +-
drivers/net/ethernet/intel/e1000e/e1000.h | 4 +
drivers/net/ethernet/intel/e1000e/netdev.c | 272 +-------------------
drivers/net/ethernet/intel/e1000e/s0ix.c | 280 +++++++++++++++++++++
4 files changed, 290 insertions(+), 268 deletions(-)
create mode 100644 drivers/net/ethernet/intel/e1000e/s0ix.c
diff --git a/drivers/net/ethernet/intel/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
index 44e58b6e7660..f2332c01f86c 100644
--- a/drivers/net/ethernet/intel/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -9,5 +9,5 @@ obj-$(CONFIG_E1000E) += e1000e.o
e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
mac.o manage.o nvm.o phy.o \
- param.o ethtool.o netdev.o ptp.o
+ param.o ethtool.o netdev.o s0ix.o ptp.o
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index ba7a0f8f6937..b13f956285ae 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -436,6 +436,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca);
#define FLAG2_DFLT_CRC_STRIPPING BIT(12)
#define FLAG2_CHECK_RX_HWTSTAMP BIT(13)
#define FLAG2_CHECK_SYSTIM_OVERFLOW BIT(14)
+#define FLAG2_ENABLE_S0IX_FLOWS BIT(15)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -462,6 +463,9 @@ enum latency_range {
extern char e1000e_driver_name[];
void e1000e_check_options(struct e1000_adapter *adapter);
+void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter);
+void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter);
+void e1000e_maybe_enable_s0ix(struct e1000_adapter *adapter);
void e1000e_set_ethtool_ops(struct net_device *netdev);
int e1000e_open(struct net_device *netdev);
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 128ab6898070..cd9839e86615 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -103,45 +103,6 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
{0, NULL}
};
-struct e1000e_me_supported {
- u16 device_id; /* supported device ID */
-};
-
-static const struct e1000e_me_supported me_supported[] = {
- {E1000_DEV_ID_PCH_LPT_I217_LM},
- {E1000_DEV_ID_PCH_LPTLP_I218_LM},
- {E1000_DEV_ID_PCH_I218_LM2},
- {E1000_DEV_ID_PCH_I218_LM3},
- {E1000_DEV_ID_PCH_SPT_I219_LM},
- {E1000_DEV_ID_PCH_SPT_I219_LM2},
- {E1000_DEV_ID_PCH_LBG_I219_LM3},
- {E1000_DEV_ID_PCH_SPT_I219_LM4},
- {E1000_DEV_ID_PCH_SPT_I219_LM5},
- {E1000_DEV_ID_PCH_CNP_I219_LM6},
- {E1000_DEV_ID_PCH_CNP_I219_LM7},
- {E1000_DEV_ID_PCH_ICP_I219_LM8},
- {E1000_DEV_ID_PCH_ICP_I219_LM9},
- {E1000_DEV_ID_PCH_CMP_I219_LM10},
- {E1000_DEV_ID_PCH_CMP_I219_LM11},
- {E1000_DEV_ID_PCH_CMP_I219_LM12},
- {E1000_DEV_ID_PCH_TGP_I219_LM13},
- {E1000_DEV_ID_PCH_TGP_I219_LM14},
- {E1000_DEV_ID_PCH_TGP_I219_LM15},
- {0}
-};
-
-static bool e1000e_check_me(u16 device_id)
-{
- struct e1000e_me_supported *id;
-
- for (id = (struct e1000e_me_supported *)me_supported;
- id->device_id; id++)
- if (device_id == id->device_id)
- return true;
-
- return false;
-}
-
/**
* __ew32_prepare - prepare to write to MAC CSR register on certain parts
* @hw: pointer to the HW structure
@@ -6368,228 +6329,6 @@ static void e1000e_flush_lpic(struct pci_dev *pdev)
pm_runtime_put_sync(netdev->dev.parent);
}
-/* S0ix implementation */
-static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 mac_data;
- u16 phy_data;
-
- /* Disable the periodic inband message,
- * don't request PCIe clock in K1 page770_17[10:9] = 10b
- */
- e1e_rphy(hw, HV_PM_CTRL, &phy_data);
- phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
- phy_data |= BIT(10);
- e1e_wphy(hw, HV_PM_CTRL, phy_data);
-
- /* Make sure we don't exit K1 every time a new packet arrives
- * 772_29[5] = 1 CS_Mode_Stay_In_K1
- */
- e1e_rphy(hw, I217_CGFREG, &phy_data);
- phy_data |= BIT(5);
- e1e_wphy(hw, I217_CGFREG, phy_data);
-
- /* Change the MAC/PHY interface to SMBus
- * Force the SMBus in PHY page769_23[0] = 1
- * Force the SMBus in MAC CTRL_EXT[11] = 1
- */
- e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
- phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
- e1e_wphy(hw, CV_SMB_CTRL, phy_data);
- mac_data = er32(CTRL_EXT);
- mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_data);
-
- /* DFT control: PHY bit: page769_20[0] = 1
- * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
- */
- e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
- phy_data |= BIT(0);
- e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
-
- mac_data = er32(EXTCNF_CTRL);
- mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
- ew32(EXTCNF_CTRL, mac_data);
-
- /* Check MAC Tx/Rx packet buffer pointers.
- * Reset MAC Tx/Rx packet buffer pointers to suppress any
- * pending traffic indication that would prevent power gating.
- */
- mac_data = er32(TDFH);
- if (mac_data)
- ew32(TDFH, 0);
- mac_data = er32(TDFT);
- if (mac_data)
- ew32(TDFT, 0);
- mac_data = er32(TDFHS);
- if (mac_data)
- ew32(TDFHS, 0);
- mac_data = er32(TDFTS);
- if (mac_data)
- ew32(TDFTS, 0);
- mac_data = er32(TDFPC);
- if (mac_data)
- ew32(TDFPC, 0);
- mac_data = er32(RDFH);
- if (mac_data)
- ew32(RDFH, 0);
- mac_data = er32(RDFT);
- if (mac_data)
- ew32(RDFT, 0);
- mac_data = er32(RDFHS);
- if (mac_data)
- ew32(RDFHS, 0);
- mac_data = er32(RDFTS);
- if (mac_data)
- ew32(RDFTS, 0);
- mac_data = er32(RDFPC);
- if (mac_data)
- ew32(RDFPC, 0);
-
- /* Enable the Dynamic Power Gating in the MAC */
- mac_data = er32(FEXTNVM7);
- mac_data |= BIT(22);
- ew32(FEXTNVM7, mac_data);
-
- /* Disable the time synchronization clock */
- mac_data = er32(FEXTNVM7);
- mac_data |= BIT(31);
- mac_data &= ~BIT(0);
- ew32(FEXTNVM7, mac_data);
-
- /* Dynamic Power Gating Enable */
- mac_data = er32(CTRL_EXT);
- mac_data |= BIT(3);
- ew32(CTRL_EXT, mac_data);
-
- /* Disable disconnected cable conditioning for Power Gating */
- mac_data = er32(DPGFR);
- mac_data |= BIT(2);
- ew32(DPGFR, mac_data);
-
- /* Don't wake from dynamic Power Gating with clock request */
- mac_data = er32(FEXTNVM12);
- mac_data |= BIT(12);
- ew32(FEXTNVM12, mac_data);
-
- /* Ungate PGCB clock */
- mac_data = er32(FEXTNVM9);
- mac_data &= ~BIT(28);
- ew32(FEXTNVM9, mac_data);
-
- /* Enable K1 off to enable mPHY Power Gating */
- mac_data = er32(FEXTNVM6);
- mac_data |= BIT(31);
- ew32(FEXTNVM6, mac_data);
-
- /* Enable mPHY power gating for any link and speed */
- mac_data = er32(FEXTNVM8);
- mac_data |= BIT(9);
- ew32(FEXTNVM8, mac_data);
-
- /* Enable the Dynamic Clock Gating in the DMA and MAC */
- mac_data = er32(CTRL_EXT);
- mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, mac_data);
-
- /* No MAC DPG gating SLP_S0 in modern standby
- * Switch the logic of the lanphypc to use PMC counter
- */
- mac_data = er32(FEXTNVM5);
- mac_data |= BIT(7);
- ew32(FEXTNVM5, mac_data);
-}
-
-static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 mac_data;
- u16 phy_data;
-
- /* Disable the Dynamic Power Gating in the MAC */
- mac_data = er32(FEXTNVM7);
- mac_data &= 0xFFBFFFFF;
- ew32(FEXTNVM7, mac_data);
-
- /* Enable the time synchronization clock */
- mac_data = er32(FEXTNVM7);
- mac_data |= BIT(0);
- ew32(FEXTNVM7, mac_data);
-
- /* Disable mPHY power gating for any link and speed */
- mac_data = er32(FEXTNVM8);
- mac_data &= ~BIT(9);
- ew32(FEXTNVM8, mac_data);
-
- /* Disable K1 off */
- mac_data = er32(FEXTNVM6);
- mac_data &= ~BIT(31);
- ew32(FEXTNVM6, mac_data);
-
- /* Disable Ungate PGCB clock */
- mac_data = er32(FEXTNVM9);
- mac_data |= BIT(28);
- ew32(FEXTNVM9, mac_data);
-
- /* Cancel not waking from dynamic
- * Power Gating with clock request
- */
- mac_data = er32(FEXTNVM12);
- mac_data &= ~BIT(12);
- ew32(FEXTNVM12, mac_data);
-
- /* Cancel disable disconnected cable conditioning
- * for Power Gating
- */
- mac_data = er32(DPGFR);
- mac_data &= ~BIT(2);
- ew32(DPGFR, mac_data);
-
- /* Disable Dynamic Power Gating */
- mac_data = er32(CTRL_EXT);
- mac_data &= 0xFFFFFFF7;
- ew32(CTRL_EXT, mac_data);
-
- /* Disable the Dynamic Clock Gating in the DMA and MAC */
- mac_data = er32(CTRL_EXT);
- mac_data &= 0xFFF7FFFF;
- ew32(CTRL_EXT, mac_data);
-
- /* Revert the lanphypc logic to use the internal Gbe counter
- * and not the PMC counter
- */
- mac_data = er32(FEXTNVM5);
- mac_data &= 0xFFFFFF7F;
- ew32(FEXTNVM5, mac_data);
-
- /* Enable the periodic inband message,
- * Request PCIe clock in K1 page770_17[10:9] =01b
- */
- e1e_rphy(hw, HV_PM_CTRL, &phy_data);
- phy_data &= 0xFBFF;
- phy_data |= HV_PM_CTRL_K1_CLK_REQ;
- e1e_wphy(hw, HV_PM_CTRL, phy_data);
-
- /* Return back configuration
- * 772_29[5] = 0 CS_Mode_Stay_In_K1
- */
- e1e_rphy(hw, I217_CGFREG, &phy_data);
- phy_data &= 0xFFDF;
- e1e_wphy(hw, I217_CGFREG, phy_data);
-
- /* Change the MAC/PHY interface to Kumeran
- * Unforce the SMBus in PHY page769_23[0] = 0
- * Unforce the SMBus in MAC CTRL_EXT[11] = 0
- */
- e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
- phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
- e1e_wphy(hw, CV_SMB_CTRL, phy_data);
- mac_data = er32(CTRL_EXT);
- mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_data);
-}
-
static int e1000e_pm_freeze(struct device *dev)
{
struct net_device *netdev = dev_get_drvdata(dev);
@@ -6962,7 +6701,6 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = to_pci_dev(dev);
- struct e1000_hw *hw = &adapter->hw;
int rc;
e1000e_flush_lpic(pdev);
@@ -6974,8 +6712,7 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
e1000e_pm_thaw(dev);
/* Introduce S0ix implementation */
- if (hw->mac.type >= e1000_pch_cnp &&
- !e1000e_check_me(hw->adapter->pdev->device))
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
e1000e_s0ix_entry_flow(adapter);
return rc;
@@ -6986,12 +6723,10 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = to_pci_dev(dev);
- struct e1000_hw *hw = &adapter->hw;
int rc;
/* Introduce S0ix implementation */
- if (hw->mac.type >= e1000_pch_cnp &&
- !e1000e_check_me(hw->adapter->pdev->device))
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
e1000e_s0ix_exit_flow(adapter);
rc = __e1000_resume(pdev);
@@ -7655,6 +7390,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_get_hw_control(adapter);
+ /* use heuristics to decide whether to enable s0ix flows */
+ e1000e_maybe_enable_s0ix(adapter);
+
strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
err = register_netdev(netdev);
if (err)
diff --git a/drivers/net/ethernet/intel/e1000e/s0ix.c b/drivers/net/ethernet/intel/e1000e/s0ix.c
new file mode 100644
index 000000000000..c3013edbd9e4
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/s0ix.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#include <linux/netdevice.h>
+
+#include "e1000.h"
+
+struct e1000e_me_supported {
+ u16 device_id; /* supported device ID */
+};
+
+static const struct e1000e_me_supported me_supported[] = {
+ {E1000_DEV_ID_PCH_LPT_I217_LM},
+ {E1000_DEV_ID_PCH_LPTLP_I218_LM},
+ {E1000_DEV_ID_PCH_I218_LM2},
+ {E1000_DEV_ID_PCH_I218_LM3},
+ {E1000_DEV_ID_PCH_SPT_I219_LM},
+ {E1000_DEV_ID_PCH_SPT_I219_LM2},
+ {E1000_DEV_ID_PCH_LBG_I219_LM3},
+ {E1000_DEV_ID_PCH_SPT_I219_LM4},
+ {E1000_DEV_ID_PCH_SPT_I219_LM5},
+ {E1000_DEV_ID_PCH_CNP_I219_LM6},
+ {E1000_DEV_ID_PCH_CNP_I219_LM7},
+ {E1000_DEV_ID_PCH_ICP_I219_LM8},
+ {E1000_DEV_ID_PCH_ICP_I219_LM9},
+ {E1000_DEV_ID_PCH_CMP_I219_LM10},
+ {E1000_DEV_ID_PCH_CMP_I219_LM11},
+ {E1000_DEV_ID_PCH_CMP_I219_LM12},
+ {E1000_DEV_ID_PCH_TGP_I219_LM13},
+ {E1000_DEV_ID_PCH_TGP_I219_LM14},
+ {E1000_DEV_ID_PCH_TGP_I219_LM15},
+ {0}
+};
+
+static bool e1000e_check_me(u16 device_id)
+{
+ struct e1000e_me_supported *id;
+
+ for (id = (struct e1000e_me_supported *)me_supported;
+ id->device_id; id++)
+ if (device_id == id->device_id)
+ return true;
+
+ return false;
+}
+
+void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mac_data;
+ u16 phy_data;
+
+ /* Disable the periodic inband message,
+ * don't request PCIe clock in K1 page770_17[10:9] = 10b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
+ phy_data |= BIT(10);
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+ /* Make sure we don't exit K1 every time a new packet arrives
+ * 772_29[5] = 1 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data |= BIT(5);
+ e1e_wphy(hw, I217_CGFREG, phy_data);
+
+ /* Change the MAC/PHY interface to SMBus
+ * Force the SMBus in PHY page769_23[0] = 1
+ * Force the SMBus in MAC CTRL_EXT[11] = 1
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+ mac_data = er32(CTRL_EXT);
+ mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_data);
+
+ /* DFT control: PHY bit: page769_20[0] = 1
+ * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
+ */
+ e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
+ phy_data |= BIT(0);
+ e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
+
+ mac_data = er32(EXTCNF_CTRL);
+ mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ ew32(EXTCNF_CTRL, mac_data);
+
+ /* Check MAC Tx/Rx packet buffer pointers.
+ * Reset MAC Tx/Rx packet buffer pointers to suppress any
+ * pending traffic indication that would prevent power gating.
+ */
+ mac_data = er32(TDFH);
+ if (mac_data)
+ ew32(TDFH, 0);
+ mac_data = er32(TDFT);
+ if (mac_data)
+ ew32(TDFT, 0);
+ mac_data = er32(TDFHS);
+ if (mac_data)
+ ew32(TDFHS, 0);
+ mac_data = er32(TDFTS);
+ if (mac_data)
+ ew32(TDFTS, 0);
+ mac_data = er32(TDFPC);
+ if (mac_data)
+ ew32(TDFPC, 0);
+ mac_data = er32(RDFH);
+ if (mac_data)
+ ew32(RDFH, 0);
+ mac_data = er32(RDFT);
+ if (mac_data)
+ ew32(RDFT, 0);
+ mac_data = er32(RDFHS);
+ if (mac_data)
+ ew32(RDFHS, 0);
+ mac_data = er32(RDFTS);
+ if (mac_data)
+ ew32(RDFTS, 0);
+ mac_data = er32(RDFPC);
+ if (mac_data)
+ ew32(RDFPC, 0);
+
+ /* Enable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(22);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Disable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(31);
+ mac_data &= ~BIT(0);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Dynamic Power Gating Enable */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= BIT(3);
+ ew32(CTRL_EXT, mac_data);
+
+ /* Disable disconnected cable conditioning for Power Gating */
+ mac_data = er32(DPGFR);
+ mac_data |= BIT(2);
+ ew32(DPGFR, mac_data);
+
+ /* Don't wake from dynamic Power Gating with clock request */
+ mac_data = er32(FEXTNVM12);
+ mac_data |= BIT(12);
+ ew32(FEXTNVM12, mac_data);
+
+ /* Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data &= ~BIT(28);
+ ew32(FEXTNVM9, mac_data);
+
+ /* Enable K1 off to enable mPHY Power Gating */
+ mac_data = er32(FEXTNVM6);
+ mac_data |= BIT(31);
+ ew32(FEXTNVM6, mac_data);
+
+ /* Enable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data |= BIT(9);
+ ew32(FEXTNVM8, mac_data);
+
+ /* Enable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, mac_data);
+
+ /* No MAC DPG gating SLP_S0 in modern standby
+ * Switch the logic of the lanphypc to use PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data |= BIT(7);
+ ew32(FEXTNVM5, mac_data);
+}
+
+void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mac_data;
+ u16 phy_data;
+
+ /* Disable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data &= 0xFFBFFFFF;
+ ew32(FEXTNVM7, mac_data);
+
+ /* Enable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(0);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Disable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data &= ~BIT(9);
+ ew32(FEXTNVM8, mac_data);
+
+ /* Disable K1 off */
+ mac_data = er32(FEXTNVM6);
+ mac_data &= ~BIT(31);
+ ew32(FEXTNVM6, mac_data);
+
+ /* Disable Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data |= BIT(28);
+ ew32(FEXTNVM9, mac_data);
+
+ /* Cancel not waking from dynamic
+ * Power Gating with clock request
+ */
+ mac_data = er32(FEXTNVM12);
+ mac_data &= ~BIT(12);
+ ew32(FEXTNVM12, mac_data);
+
+ /* Cancel disable disconnected cable conditioning
+ * for Power Gating
+ */
+ mac_data = er32(DPGFR);
+ mac_data &= ~BIT(2);
+ ew32(DPGFR, mac_data);
+
+ /* Disable Dynamic Power Gating */
+ mac_data = er32(CTRL_EXT);
+ mac_data &= 0xFFFFFFF7;
+ ew32(CTRL_EXT, mac_data);
+
+ /* Disable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data &= 0xFFF7FFFF;
+ ew32(CTRL_EXT, mac_data);
+
+ /* Revert the lanphypc logic to use the internal Gbe counter
+ * and not the PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data &= 0xFFFFFF7F;
+ ew32(FEXTNVM5, mac_data);
+
+ /* Enable the periodic inband message,
+ * Request PCIe clock in K1 page770_17[10:9] =01b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= 0xFBFF;
+ phy_data |= HV_PM_CTRL_K1_CLK_REQ;
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+ /* Return back configuration
+ * 772_29[5] = 0 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data &= 0xFFDF;
+ e1e_wphy(hw, I217_CGFREG, phy_data);
+
+ /* Change the MAC/PHY interface to Kumeran
+ * Unforce the SMBus in PHY page769_23[0] = 0
+ * Unforce the SMBus in MAC CTRL_EXT[11] = 0
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+ mac_data = er32(CTRL_EXT);
+ mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_data);
+}
+
+void e1000e_maybe_enable_s0ix(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* require cannon point or later */
+ if (hw->mac.type < e1000_pch_cnp)
+ return;
+ /* turn off on ME configurations */
+ if (e1000e_check_me(pdev->device))
+ return;
+ adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
+}
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 5/5] e1000e: Export s0ix flags to ethtool
2020-12-02 16:17 [PATCH v2 0/5] Improve s0ix flows for systems i219LM Mario Limonciello
` (3 preceding siblings ...)
2020-12-02 16:17 ` [PATCH v2 4/5] e1000e: Add more Dell CML " Mario Limonciello
@ 2020-12-02 16:17 ` Mario Limonciello
4 siblings, 0 replies; 9+ messages in thread
From: Mario Limonciello @ 2020-12-02 16:17 UTC (permalink / raw)
To: Jeff Kirsher, Tony Nguyen, intel-wired-lan
Cc: linux-kernel, Linux PM, Netdev, Alexander Duyck, Jakub Kicinski,
Sasha Netfin, Aaron Brown, Stefan Assmann, David Miller, darcari,
Yijun.Shen, Perry.Yuan, Mario Limonciello, Yijun Shen
This flag can be used for debugging and development purposes
including determining if s0ix flows work properly for a system
not currently recognized by heuristics.
Tested-by: Yijun Shen <yijun.shen@dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
---
drivers/net/ethernet/intel/e1000e/ethtool.c | 40 +++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 03215b0aee4b..eb683949ebfe 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -23,6 +23,13 @@ struct e1000_stats {
int stat_offset;
};
+static const char e1000e_priv_flags_strings[][ETH_GSTRING_LEN] = {
+#define E1000E_PRIV_FLAGS_S0IX_ENABLED BIT(0)
+ "s0ix-enabled",
+};
+
+#define E1000E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(e1000e_priv_flags_strings)
+
#define E1000_STAT(str, m) { \
.stat_string = str, \
.type = E1000_STATS, \
@@ -1776,6 +1783,8 @@ static int e1000e_get_sset_count(struct net_device __always_unused *netdev,
return E1000_TEST_LEN;
case ETH_SS_STATS:
return E1000_STATS_LEN;
+ case ETH_SS_PRIV_FLAGS:
+ return E1000E_PRIV_FLAGS_STR_LEN;
default:
return -EOPNOTSUPP;
}
@@ -2097,6 +2106,10 @@ static void e1000_get_strings(struct net_device __always_unused *netdev,
p += ETH_GSTRING_LEN;
}
break;
+ case ETH_SS_PRIV_FLAGS:
+ memcpy(data, e1000e_priv_flags_strings,
+ E1000E_PRIV_FLAGS_STR_LEN * ETH_GSTRING_LEN);
+ break;
}
}
@@ -2305,6 +2318,31 @@ static int e1000e_get_ts_info(struct net_device *netdev,
return 0;
}
+static u32 e1000e_get_priv_flags(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ u32 priv_flags = 0;
+
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
+ priv_flags |= E1000E_PRIV_FLAGS_S0IX_ENABLED;
+
+ return priv_flags;
+}
+
+static int e1000e_set_priv_flags(struct net_device *netdev, u32 priv_flags)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ unsigned int flags2 = adapter->flags2;
+
+ flags2 &= ~FLAG2_ENABLE_S0IX_FLOWS;
+ if (priv_flags & E1000E_PRIV_FLAGS_S0IX_ENABLED)
+ flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
+ if (flags2 != adapter->flags2)
+ adapter->flags2 = flags2;
+
+ return 0;
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
.get_drvinfo = e1000_get_drvinfo,
@@ -2336,6 +2374,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.set_eee = e1000e_set_eee,
.get_link_ksettings = e1000_get_link_ksettings,
.set_link_ksettings = e1000_set_link_ksettings,
+ .get_priv_flags = e1000e_get_priv_flags,
+ .set_priv_flags = e1000e_set_priv_flags,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)
--
2.25.1
^ permalink raw reply related [flat|nested] 9+ messages in thread