From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
tiwai@suse.de, broonie@kernel.org, gregkh@linuxfoundation.org,
jank@cadence.com, srinivas.kandagatla@linaro.org,
rander.wang@linux.intel.com, ranjani.sridharan@linux.intel.com,
hui.wang@canonical.com, pierre-louis.bossart@linux.intel.com,
sanyog.r.kale@intel.com, bard.liao@intel.com
Subject: [PATCH 3/7] soundwire: bus: use no_pm IO routines for all interrupt handling
Date: Thu, 3 Dec 2020 04:46:41 +0800 [thread overview]
Message-ID: <20201202204645.23891-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20201202204645.23891-1-yung-chuan.liao@linux.intel.com>
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
There is no need to play with pm_runtime reference counts, if needed
the codec drivers are already explicitly resumed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/bus.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index b1830032b052..86c339d77a39 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1295,7 +1295,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
u8 clear, impl_int_mask;
int status, status2, ret, count = 0;
- status = sdw_read(slave, SDW_DP0_INT);
+ status = sdw_read_no_pm(slave, SDW_DP0_INT);
if (status < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", status);
@@ -1334,7 +1334,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
}
/* clear the interrupts but don't touch reserved and SDCA_CASCADE fields */
- ret = sdw_write(slave, SDW_DP0_INT, clear);
+ ret = sdw_write_no_pm(slave, SDW_DP0_INT, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT write failed:%d\n", ret);
@@ -1342,7 +1342,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
}
/* Read DP0 interrupt again */
- status2 = sdw_read(slave, SDW_DP0_INT);
+ status2 = sdw_read_no_pm(slave, SDW_DP0_INT);
if (status2 < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", status2);
@@ -1373,7 +1373,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
return sdw_handle_dp0_interrupt(slave, slave_status);
addr = SDW_DPN_INT(port);
- status = sdw_read(slave, addr);
+ status = sdw_read_no_pm(slave, addr);
if (status < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT read failed:%d\n", status);
@@ -1407,7 +1407,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
}
/* clear the interrupt but don't touch reserved fields */
- ret = sdw_write(slave, addr, clear);
+ ret = sdw_write_no_pm(slave, addr, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT write failed:%d\n", ret);
@@ -1415,7 +1415,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
}
/* Read DPN interrupt again */
- status2 = sdw_read(slave, addr);
+ status2 = sdw_read_no_pm(slave, addr);
if (status2 < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT read failed:%d\n", status2);
@@ -1457,7 +1457,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
/* Read Intstat 1, Intstat 2 and Intstat 3 registers */
- ret = sdw_read(slave, SDW_SCP_INT1);
+ ret = sdw_read_no_pm(slave, SDW_SCP_INT1);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 read failed:%d\n", ret);
@@ -1465,7 +1465,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
buf = ret;
- ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, buf2);
+ ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, buf2);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT2/3 read failed:%d\n", ret);
@@ -1473,7 +1473,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
if (slave->prop.is_sdca) {
- ret = sdw_read(slave, SDW_DP0_INT);
+ ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", ret);
@@ -1570,7 +1570,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
/* Ack interrupt */
- ret = sdw_write(slave, SDW_SCP_INT1, clear);
+ ret = sdw_write_no_pm(slave, SDW_SCP_INT1, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 write failed:%d\n", ret);
@@ -1584,7 +1584,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
* Read status again to ensure no new interrupts arrived
* while servicing interrupts.
*/
- ret = sdw_read(slave, SDW_SCP_INT1);
+ ret = sdw_read_no_pm(slave, SDW_SCP_INT1);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 read failed:%d\n", ret);
@@ -1592,7 +1592,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
_buf = ret;
- ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, _buf2);
+ ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, _buf2);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT2/3 read failed:%d\n", ret);
@@ -1600,7 +1600,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
if (slave->prop.is_sdca) {
- ret = sdw_read(slave, SDW_DP0_INT);
+ ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", ret);
--
2.17.1
next prev parent reply other threads:[~2020-12-03 8:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-02 20:46 [PATCH 0/7] soundwire/regmap: use _no_pm routines Bard Liao
2020-12-02 20:46 ` [PATCH 1/7] soundwire: bus: use sdw_update_no_pm when initializing a device Bard Liao
2020-12-05 7:45 ` Vinod Koul
2020-12-05 14:59 ` Pierre-Louis Bossart
2020-12-07 4:43 ` Vinod Koul
2020-12-07 15:31 ` Pierre-Louis Bossart
2020-12-08 4:56 ` Vinod Koul
2020-12-02 20:46 ` [PATCH 2/7] soundwire: bus: use sdw_write_no_pm when setting the bus scale registers Bard Liao
2020-12-02 20:46 ` Bard Liao [this message]
2020-12-02 20:46 ` [PATCH 4/7] soundwire/regmap: use _no_pm functions in regmap_read/write Bard Liao
2020-12-05 7:45 ` Vinod Koul
2020-12-05 14:43 ` Pierre-Louis Bossart
2020-12-02 20:46 ` [PATCH 5/7] regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ Bard Liao
2020-12-05 7:46 ` Vinod Koul
2020-12-05 14:52 ` Pierre-Louis Bossart
2020-12-05 16:31 ` Greg KH
2020-12-07 4:47 ` Vinod Koul
2020-12-02 20:46 ` [PATCH 6/7] soundwire: bus: fix confusion on device used by pm_runtime Bard Liao
2020-12-02 20:46 ` [PATCH 7/7] soundwire: bus: clarify dev_err/dbg device references Bard Liao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201202204645.23891-4-yung-chuan.liao@linux.intel.com \
--to=yung-chuan.liao@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=bard.liao@intel.com \
--cc=broonie@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hui.wang@canonical.com \
--cc=jank@cadence.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rander.wang@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.de \
--cc=vinod.koul@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).