[PATCH v8 0/7] mtd: spi-nor: keep lock bits if they are non-volatile

[PATCH v8 0/7] mtd: spi-nor: keep lock bits if they are non-volatile

[Michael Walle]

I bundled this as a series, because otherwise there will be conflicts
because the "remove global protection flag" patches modify the same lines
as the main patch.

There are now two more patches:
  mtd: spi-nor: sst: fix BPn bits for the SST25VF064C
  mtd: spi-nor: ignore errors in spi_nor_unlock_all()
Both are fixes and are first in this series. This will ensure that they
might be cherry-picked without conflicts as the following patches touches
the same lines.

See invdividual patches for the version history.

Michael Walle (7):
  mtd: spi-nor: sst: fix BPn bits for the SST25VF064C
  mtd: spi-nor: ignore errors in spi_nor_unlock_all()
  mtd: spi-nor: atmel: remove global protection flag
  mtd: spi-nor: sst: remove global protection flag
  mtd: spi-nor: intel: remove global protection flag
  mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040
  mtd: spi-nor: keep lock bits if they are non-volatile

 drivers/mtd/spi-nor/Kconfig |  44 +++++++++
 drivers/mtd/spi-nor/atmel.c | 191 ++++++++++++++++++++++++++++++++----
 drivers/mtd/spi-nor/core.c  |  46 ++++++---
 drivers/mtd/spi-nor/core.h  |   9 ++
 drivers/mtd/spi-nor/esmt.c  |   2 +-
 drivers/mtd/spi-nor/intel.c |  19 ++--
 drivers/mtd/spi-nor/sst.c   |  32 +++---
 7 files changed, 279 insertions(+), 64 deletions(-)

-- 
2.20.1

[PATCH v8 1/7] mtd: spi-nor: sst: fix BPn bits for the SST25VF064C

[Michael Walle]

This flash part actually has 4 block protection bits.

Please note, that this patch is just based on information of the
datasheet of the datasheet and wasn't tested.

Reported-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - removed Cc: stable
 - added Fixes: tag
 - added note in commit message about not being tested on real hardware

changes since v6:
 - new patch

 drivers/mtd/spi-nor/sst.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index e0af6d25d573..0ab07624fb73 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -18,7 +18,8 @@ static const struct flash_info sst_parts[] = {
 			      SECT_4K | SST_WRITE) },
 	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
 			      SECT_4K | SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
+			      SECT_4K | SPI_NOR_4BIT_BP) },
 	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
 			      SECT_4K | SST_WRITE) },
 	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
-- 
2.20.1

[PATCH v8 2/7] mtd: spi-nor: ignore errors in spi_nor_unlock_all()

[Michael Walle]

Just try to unlock the whole SPI-NOR flash array. Don't abort the
probing in case of an error. Justifications:
 (1) For some boards, this just works because
     spi_nor_write_16bit_sr_and_check() is broken and just checks the
     second half of the 16bit. Once that will be fixed, SPI probe will
     fail for boards which has hardware-write protected SPI-NOR flashes.
 (2) Until now, hardware write-protection was the only viable solution
     to use the block protection bits. This is because this very
     function spi_nor_unlock_all() will be called unconditionally on
     every linux boot. Therefore, this bits only makes sense in
     combination with the hardware write-protection. If we would fail
     the SPI probe on an error in spi_nor_unlock_all() we'd break
     virtually all users of the block protection bits.
 (3) We should try hard to keep the MTD working even if the flash might
     not be writable/erasable.

Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - none

changes since v6:
 - new patch

 drivers/mtd/spi-nor/core.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 5bee7c8da4dc..013198abe929 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3121,20 +3121,27 @@ static int spi_nor_quad_enable(struct spi_nor *nor)
 }
 
 /**
- * spi_nor_unlock_all() - Unlocks the entire flash memory array.
+ * spi_nor_try_unlock_all() - Tries to unlock the entire flash memory array.
  * @nor:	pointer to a 'struct spi_nor'.
  *
  * Some SPI NOR flashes are write protected by default after a power-on reset
  * cycle, in order to avoid inadvertent writes during power-up. Backward
  * compatibility imposes to unlock the entire flash memory array at power-up
  * by default.
+ *
+ * Unprotecting the entire flash array will fail for boards which are hardware
+ * write-protected. Thus any errors are ignored.
  */
-static int spi_nor_unlock_all(struct spi_nor *nor)
+static void spi_nor_try_unlock_all(struct spi_nor *nor)
 {
-	if (nor->flags & SNOR_F_HAS_LOCK)
-		return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+	int ret;
 
-	return 0;
+	if (!(nor->flags & SNOR_F_HAS_LOCK))
+		return;
+
+	ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+	if (ret)
+		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
 }
 
 static int spi_nor_init(struct spi_nor *nor)
@@ -3153,11 +3160,7 @@ static int spi_nor_init(struct spi_nor *nor)
 		return err;
 	}
 
-	err = spi_nor_unlock_all(nor);
-	if (err) {
-		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
-		return err;
-	}
+	spi_nor_try_unlock_all(nor);
 
 	if (nor->addr_width == 4 &&
 	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
-- 
2.20.1

[PATCH v8 3/7] mtd: spi-nor: atmel: remove global protection flag

[Michael Walle]

This is considered bad for the following reasons:
 (1) We only support the block protection with BPn bits for write
     protection. Not all Atmel parts support this.
 (2) Newly added flash chip will automatically inherit the "has
     locking" support and thus needs to explicitly tested. Better
     be opt-in instead of opt-out.
 (3) There are already supported flashes which doesn't support
     the locking scheme. So I assume this wasn't properly tested
     before adding that chip; which enforces my previous argument
     that locking support should be an opt-in.

Remove the global flag and add individual flags to all flashes which
supports BP locking. In particular the following flashes don't support
the BP scheme:
 - AT26F004
 - AT25SL321
 - AT45DB081D

Please note, that some flashes which are marked as SPI_NOR_HAS_LOCK just
support Global Protection, i.e. not our supported block protection
locking scheme. This is to keep backwards compatibility with the
current "unlock all at boot" mechanism. In particular the following
flashes doesn't have BP bits:
 - AT25DF041A
 - AT25DF321
 - AT25DF321A
 - AT25DF641
 - AT26DF081A
 - AT26DF161A
 - AT26DF321

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - none

changes since v6:
 - none

changes since v5:
 - none

changes since v4:
 - none

changes since v3/v2/v1:
 - there was no such version because this patch was bundled with another
   patch

changes since RFC:
 - mention the flashes which just support the "Global Unprotect" in the
   commit message

 drivers/mtd/spi-nor/atmel.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 3f5f21a473a6..49d392c6c8bc 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -10,37 +10,27 @@
 
 static const struct flash_info atmel_parts[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK) },
 
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
-	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K) },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
 
 	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 
 	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
 
 	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
 };
 
-static void atmel_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static const struct spi_nor_fixups atmel_fixups = {
-	.default_init = atmel_default_init,
-};
-
 const struct spi_nor_manufacturer spi_nor_atmel = {
 	.name = "atmel",
 	.parts = atmel_parts,
 	.nparts = ARRAY_SIZE(atmel_parts),
-	.fixups = &atmel_fixups,
 };
-- 
2.20.1

[PATCH v8 4/7] mtd: spi-nor: sst: remove global protection flag

[Michael Walle]

This is considered bad for the following reasons:
 (1) We only support the block protection with BPn bits for write
     protection. Not all SST parts support this.
 (2) Newly added flash chip will automatically inherit the "has
     locking" support and thus needs to explicitly tested. Better
     be opt-in instead of opt-out.
 (3) There are already supported flashes which doesn't support
     the locking scheme. So I assume this wasn't properly tested
     before adding that chip; which enforces my previous argument
     that locking support should be an opt-in.

Remove the global flag and add individual flags to all flashes
which supports BP locking. In particular the following flashes
don't support the BP scheme:
 - SST26VF016B
 - SST26WF016B
 - SST26VF064B

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - none

changes since v6:
 - none

changes since v5:
 - none

changes since v4:
 - none

changes since v3/v2/v1:
 - there was no such version because this patch was bundled with another
   patch

changes since RFC:
 - none

 drivers/mtd/spi-nor/sst.c | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 0ab07624fb73..0d9d319f61e6 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -11,27 +11,27 @@
 static const struct flash_info sst_parts[] = {
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
-			      SECT_4K | SPI_NOR_4BIT_BP) },
+			      SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
-			      SECT_4K | SST_WRITE) },
-	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
-	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
 	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
@@ -128,11 +128,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return ret;
 }
 
-static void sst_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
 static void sst_post_sfdp_fixups(struct spi_nor *nor)
 {
 	if (nor->info->flags & SST_WRITE)
@@ -140,7 +135,6 @@ static void sst_post_sfdp_fixups(struct spi_nor *nor)
 }
 
 static const struct spi_nor_fixups sst_fixups = {
-	.default_init = sst_default_init,
 	.post_sfdp = sst_post_sfdp_fixups,
 };
 
-- 
2.20.1

[PATCH v8 5/7] mtd: spi-nor: intel: remove global protection flag

[Michael Walle]

For the Atmel and SST parts this flag was already moved to individual
flash parts because it is considered bad esp. because newer flash chips
will automatically inherit the "has locking" support. While this won't
likely be the case for the Intel parts, we do it for consistency
reasons.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7
 - none

changes since v6
 - none

changes since v5
 - new patch

 drivers/mtd/spi-nor/intel.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index d8196f101368..6c31bef3fc60 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -10,23 +10,13 @@
 
 static const struct flash_info intel_parts[] = {
 	/* Intel/Numonyx -- xxxs33b */
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
-};
-
-static void intel_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static const struct spi_nor_fixups intel_fixups = {
-	.default_init = intel_default_init,
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, SPI_NOR_HAS_LOCK) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, SPI_NOR_HAS_LOCK) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, SPI_NOR_HAS_LOCK) },
 };
 
 const struct spi_nor_manufacturer spi_nor_intel = {
 	.name = "intel",
 	.parts = intel_parts,
 	.nparts = ARRAY_SIZE(intel_parts),
-	.fixups = &intel_fixups,
 };
-- 
2.20.1

[PATCH v8 6/7] mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040

[Michael Walle]

These flashes have some weird BP bits mapping which aren't supported in
the current locking code. Just add a simple unlock op to unprotect the
entire flash array which is needed for legacy behavior.

Fixes: 3e0930f109e7 ("mtd: spi-nor: Rework the disabling of block write protection")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - added fixes tag

changes since v6:
 - use spi_nor_write_sr_and_check() and log a debug message if writing
   fails

changes since v5:
 - new patch

 drivers/mtd/spi-nor/atmel.c | 53 +++++++++++++++++++++++++++++++++++--
 drivers/mtd/spi-nor/core.c  |  2 +-
 drivers/mtd/spi-nor/core.h  |  1 +
 3 files changed, 53 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index 49d392c6c8bc..deacf87a68a0 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -8,10 +8,59 @@
 
 #include "core.h"
 
+/*
+ * The Atmel AT25FS010/AT25FS040 parts have some weird configuration for the
+ * block protection bits. We don't support them. But legacy behavior in linux
+ * is to unlock the whole flash array on startup. Therefore, we have to support
+ * exactly this operation.
+ */
+static int atmel_at25fs_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static int atmel_at25fs_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	/* We only support unlocking the whole flash array */
+	if (ofs || len != nor->params->size)
+		return -EINVAL;
+
+	/* Write 0x00 to the status register to disable write protection */
+	ret = spi_nor_write_sr_and_check(nor, 0);
+	if (ret)
+		dev_dbg(nor->dev, "unable to clear BP bits, WP# asserted?\n");
+
+	return ret;
+}
+
+static int atmel_at25fs_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct spi_nor_locking_ops atmel_at25fs_locking_ops = {
+	.lock = atmel_at25fs_lock,
+	.unlock = atmel_at25fs_unlock,
+	.is_locked = atmel_at25fs_is_locked,
+};
+
+static void atmel_at25fs_default_init(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &atmel_at25fs_locking_ops;
+}
+
+static const struct spi_nor_fixups atmel_at25fs_fixups = {
+	.default_init = atmel_at25fs_default_init,
+};
+
 static const struct flash_info atmel_parts[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
-	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K | SPI_NOR_HAS_LOCK)
+		.fixups = &atmel_at25fs_fixups },
+	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK)
+		.fixups = &atmel_at25fs_fixups },
 
 	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_HAS_LOCK) },
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 013198abe929..6afcb99e9741 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1049,7 +1049,7 @@ static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
+int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
 {
 	if (nor->flags & SNOR_F_HAS_16BIT_SR)
 		return spi_nor_write_16bit_sr_and_check(nor, sr1);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 0a775a7b5606..7780169d485b 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -430,6 +430,7 @@ void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
 
 int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
 ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
-- 
2.20.1

[PATCH v8 7/7] mtd: spi-nor: keep lock bits if they are non-volatile

[Michael Walle]

Traditionally, linux unlocks the whole flash because there are legacy
devices which has the write protections bits set by default at startup.
If you actually want to use the flash protection bits, eg. because there
is a read-only part for a bootloader, this automatic unlocking is
harmful. If there is no hardware write protection in place (usually
called WP#), a startup of the kernel just discards this protection.

I've gone through the datasheets of all the flashes (except the Intel
ones where I could not find any datasheet nor reference) which supports
the unlocking feature and looked how the sector protection was
implemented. The currently supported flashes can be divided into the
following two categories:
 (1) block protection bits are non-volatile. Thus they keep their values
     at reset and power-cycle
 (2) flashes where these bits are volatile. After reset or power-cycle,
     the whole memory array is protected.
     (a) some devices needs a special "Global Unprotect" command, eg.
         the Atmel AT25DF041A.
     (b) some devices require to clear the BPn bits in the status
         register.

Due to the reasons above, we do not want to clear the bits for flashes
which belong to category (1). Fortunately for us, only Atmel flashes
fall into category (2a). Implement the "Global Protect" and "Global
Unprotect" commands for these. For (2b) we can use normal block
protection locking scheme.

This patch adds a new flag to indicate the case (2). Only if we have
such a flash we unlock the whole flash array. To be backwards compatible
it also introduces a kernel configuration option which restores the
complete legacy behavior ("Disable write protection on any flashes").
Hopefully, this will clean up "unlock the entire flash for legacy
devices" once and for all.

For reference here are the actually commits which introduced the legacy
behavior (and extended the behavior to other chip manufacturers):

commit f80e521c916cb ("mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chips")
commit ea60658a08f8f ("mtd: m25p80: disable SST software protection bits by default")
commit 7228982442365 ("[MTD] m25p80: fix bug - ATmel spi flash fails to be copied to")

Actually, this might also fix handling of the Atmel AT25DF flashes,
because the original commit 7228982442365 ("[MTD] m25p80: fix bug -
ATmel spi flash fails to be copied to") was writing a 0 to the status
register, which is a "Global Unprotect". This might not be the case in
the current code which only handles the block protection bits BP2, BP1
and BP0. Thus, it depends on the current contents of the status register
if this unlock actually corresponds to a "Global Unprotect" command. In
the worst case, the current code might leave the AT25DF flashes in a
write protected state.

The commit 191f5c2ed4b6f ("mtd: spi-nor: use 16-bit WRR command when QE
is set on spansion flashes") changed that behavior by just clearing BP2
to BP0 instead of writing a 0 to the status register.

Further, the commit 3e0930f109e76 ("mtd: spi-nor: Rework the disabling
of block write protection") expanded the unlock_all() feature to ANY
flash which supports locking.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
changes since v7:
 - none

changes since v6:
 - fixed typos, small documentation changes
 - changed _WP_ to _SWP_, "write protection" to "software write
   protection"
 - use dev_dbg() instead of dev_err() to print message about WP pin

changes since v5:
 - also set SRWD bit for the "Global Protect" command
 - use spi_nor_write_sr() instead of spi_nor_write_sr_and_check() to send
   the "Global Protect" or "Global Unprotect" command
 - mark ESMT F25L32QA as non-volatile as indicated in a newer datasheet
   revision
 - rebased to latest tree

changes since v4:
 - made atmel_global_protection_default_init() static, spotted by
   lkp@intel.com

changes since v3:
 - now defaulting to MTD_SPI_NOR_WP_DISABLE_ON_VOLATILE, suggested by Vignesh
 - restored the original spi_nor_unlock_all(), instead add individual
   locking ops for the "Global Protect" scheme in atmel.c. This was tested
   partly with the AT25SL321 (for the test I added the fixups to this
   flash).
 - renamed SPI_NOR_UNPROTECT to SPI_NOR_WP_IS_VOLATILE. Suggested by
   Vingesh, although I've renamed it to a more general "WP_IS_VOLATILE"
   because either the BP bits or the individual sector locks might be
   volatile.
 - add mention of both block protection bits and "Global Unprotect" command
   in the Kconfig help text.

changes since v2:
 - add Kconfig option to be able to retain legacy behavior
 - rebased the patch due to the spi-nor rewrite
 - dropped the Fixes: tag, it doens't make sense after the spi-nor rewrite
 - mention commit 3e0930f109e76 which further modified the unlock
   behavior.

changes since v1:
 - completely rewrote patch, the first version used a device tree flag

 drivers/mtd/spi-nor/Kconfig |  44 +++++++++++++
 drivers/mtd/spi-nor/atmel.c | 128 ++++++++++++++++++++++++++++++++++--
 drivers/mtd/spi-nor/core.c  |  23 ++++++-
 drivers/mtd/spi-nor/core.h  |   8 +++
 drivers/mtd/spi-nor/esmt.c  |   2 +-
 drivers/mtd/spi-nor/intel.c |   9 ++-
 drivers/mtd/spi-nor/sst.c   |  21 +++---
 7 files changed, 211 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index ffc4b380f2b1..24cd25de2b8b 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -24,6 +24,50 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 	  Please note that some tools/drivers/filesystems may not work with
 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
 
+choice
+	prompt "Software write protection at boot"
+	default MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE
+
+config MTD_SPI_NOR_SWP_DISABLE
+	bool "Disable SWP on any flashes (legacy behavior)"
+	help
+	  This option disables the software write protection on any SPI
+	  flashes at boot-up.
+
+	  Depending on the flash chip this either clears the block protection
+	  bits or does a "Global Unprotect" command.
+
+	  Don't use this if you intent to use the software write protection
+	  of your SPI flash. This is only to keep backwards compatibility.
+
+config MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE
+	bool "Disable SWP on flashes w/ volatile protection bits"
+	help
+	  Some SPI flashes have volatile block protection bits, ie. after a
+	  power-up or a reset the flash is software write protected by
+	  default.
+
+	  This option disables the software write protection for these kind
+	  of flashes while keeping it enabled for any other SPI flashes
+	  which have non-volatile write protection bits.
+
+	  If the software write protection will be disabled depending on
+	  the flash either the block protection bits are cleared or a
+	  "Global Unprotect" command is issued.
+
+	  If you are unsure, select this option.
+
+config MTD_SPI_NOR_SWP_KEEP
+	bool "Keep software write protection as is"
+	help
+	  If you select this option the software write protection of any
+	  SPI flashes will not be changed. If your flash is software write
+	  protected or will be automatically software write protected after
+	  power-up you have to manually unlock it before you are able to
+	  write to it.
+
+endchoice
+
 source "drivers/mtd/spi-nor/controllers/Kconfig"
 
 endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c
index deacf87a68a0..1fea5cab492c 100644
--- a/drivers/mtd/spi-nor/atmel.c
+++ b/drivers/mtd/spi-nor/atmel.c
@@ -8,6 +8,8 @@
 
 #include "core.h"
 
+#define ATMEL_SR_GLOBAL_PROTECT_MASK GENMASK(5, 2)
+
 /*
  * The Atmel AT25FS010/AT25FS040 parts have some weird configuration for the
  * block protection bits. We don't support them. But legacy behavior in linux
@@ -55,6 +57,104 @@ static const struct spi_nor_fixups atmel_at25fs_fixups = {
 	.default_init = atmel_at25fs_default_init,
 };
 
+/**
+ * atmel_set_global_protection - Do a Global Protect or Unprotect command
+ * @nor:	pointer to 'struct spi_nor'
+ * @ofs:	offset in bytes
+ * @len:	len in bytes
+ * @is_protect:	if true do a Global Protect otherwise it is a Global Unprotect
+ *
+ * Return: 0 on success, -error otherwise.
+ */
+static int atmel_set_global_protection(struct spi_nor *nor, loff_t ofs,
+				       uint64_t len, bool is_protect)
+{
+	int ret;
+	u8 sr;
+
+	/* We only support locking the whole flash array */
+	if (ofs || len != nor->params->size)
+		return -EINVAL;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	sr = nor->bouncebuf[0];
+
+	/* SRWD bit needs to be cleared, otherwise the protection doesn't change */
+	if (sr & SR_SRWD) {
+		sr &= ~SR_SRWD;
+		ret = spi_nor_write_sr_and_check(nor, sr);
+		if (ret) {
+			dev_dbg(nor->dev, "unable to clear SRWD bit, WP# asserted?\n");
+			return ret;
+		}
+	}
+
+	if (is_protect) {
+		sr |= ATMEL_SR_GLOBAL_PROTECT_MASK;
+		/*
+		 * Set the SRWD bit again as soon as we are protecting
+		 * anything. This will ensure that the WP# pin is working
+		 * correctly. By doing this we also behave the same as
+		 * spi_nor_sr_lock(), which sets SRWD if any block protection
+		 * is active.
+		 */
+		sr |= SR_SRWD;
+	} else {
+		sr &= ~ATMEL_SR_GLOBAL_PROTECT_MASK;
+	}
+
+	nor->bouncebuf[0] = sr;
+
+	/*
+	 * We cannot use the spi_nor_write_sr_and_check() because this command
+	 * isn't really setting any bits, instead it is an pseudo command for
+	 * "Global Unprotect" or "Global Protect"
+	 */
+	return spi_nor_write_sr(nor, nor->bouncebuf, 1);
+}
+
+static int atmel_global_protect(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return atmel_set_global_protection(nor, ofs, len, true);
+}
+
+static int atmel_global_unprotect(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	return atmel_set_global_protection(nor, ofs, len, false);
+}
+
+static int atmel_is_global_protected(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+	int ret;
+
+	if (ofs >= nor->params->size || (ofs + len) > nor->params->size)
+		return -EINVAL;
+
+	ret = spi_nor_read_sr(nor, nor->bouncebuf);
+	if (ret)
+		return ret;
+
+	return ((nor->bouncebuf[0] & ATMEL_SR_GLOBAL_PROTECT_MASK) == ATMEL_SR_GLOBAL_PROTECT_MASK);
+}
+
+static const struct spi_nor_locking_ops atmel_global_protection_ops = {
+	.lock = atmel_global_protect,
+	.unlock = atmel_global_unprotect,
+	.is_locked = atmel_is_global_protected,
+};
+
+static void atmel_global_protection_default_init(struct spi_nor *nor)
+{
+	nor->params->locking_ops = &atmel_global_protection_ops;
+}
+
+static const struct spi_nor_fixups atmel_global_protection_fixups = {
+	.default_init = atmel_global_protection_default_init,
+};
+
 static const struct flash_info atmel_parts[] = {
 	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
 	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K | SPI_NOR_HAS_LOCK)
@@ -62,18 +162,32 @@ static const struct flash_info atmel_parts[] = {
 	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK)
 		.fixups = &atmel_at25fs_fixups },
 
-	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
+	{ "at25df321",  INFO(0x1f4700, 0, 64 * 1024,  64,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
+	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
+	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
 
 	{ "at25sl321",	INFO(0x1f4216, 0, 64 * 1024, 64,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 
 	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
-	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_HAS_LOCK) },
-	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
+	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
+	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
+	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64,
+			     SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
+			.fixups = &atmel_global_protection_fixups },
 
 	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
 };
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 6afcb99e9741..235acf3f4c43 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -377,7 +377,7 @@ int spi_nor_write_disable(struct spi_nor *nor)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
+int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
 {
 	int ret;
 
@@ -861,7 +861,7 @@ int spi_nor_wait_till_ready(struct spi_nor *nor)
  *
  * Return: 0 on success, -errno otherwise.
  */
-static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
+int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
 {
 	int ret;
 
@@ -3139,6 +3139,8 @@ static void spi_nor_try_unlock_all(struct spi_nor *nor)
 	if (!(nor->flags & SNOR_F_HAS_LOCK))
 		return;
 
+	dev_dbg(nor->dev, "Unprotecting entire flash array\n");
+
 	ret = spi_nor_unlock(&nor->mtd, 0, nor->params->size);
 	if (ret)
 		dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
@@ -3160,7 +3162,20 @@ static int spi_nor_init(struct spi_nor *nor)
 		return err;
 	}
 
-	spi_nor_try_unlock_all(nor);
+	/*
+	 * Some SPI NOR flashes are write protected by default after a power-on
+	 * reset cycle, in order to avoid inadvertent writes during power-up.
+	 * Backward compatibility imposes to unlock the entire flash memory
+	 * array at power-up by default. Depending on the kernel configuration
+	 * (1) do nothing, (2) always unlock the entire flash array or (3)
+	 * unlock the entire flash array only when the software write
+	 * protection bits are volatile. The latter is indicated by
+	 * SNOR_F_SWP_IS_VOLATILE.
+	 */
+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_SWP_DISABLE) ||
+	    (IS_ENABLED(CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE) &&
+	     nor->flags & SNOR_F_SWP_IS_VOLATILE))
+		spi_nor_try_unlock_all(nor);
 
 	if (nor->addr_width == 4 &&
 	    nor->read_proto != SNOR_PROTO_8_8_8_DTR &&
@@ -3459,6 +3474,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
 	if (info->flags & USE_CLSR)
 		nor->flags |= SNOR_F_USE_CLSR;
+	if (info->flags & SPI_NOR_SWP_IS_VOLATILE)
+		nor->flags |= SNOR_F_SWP_IS_VOLATILE;
 
 	if (info->flags & SPI_NOR_4BIT_BP) {
 		nor->flags |= SNOR_F_HAS_4BIT_BP;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 7780169d485b..89acf499aecb 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -28,6 +28,7 @@ enum spi_nor_option_flags {
 	SNOR_F_HAS_SR_BP3_BIT6  = BIT(13),
 	SNOR_F_IO_MODE_EN_VOLATILE = BIT(14),
 	SNOR_F_SOFT_RESET	= BIT(15),
+	SNOR_F_SWP_IS_VOLATILE	= BIT(16),
 };
 
 struct spi_nor_read_command {
@@ -329,6 +330,11 @@ struct flash_info {
 						 * available I/O mode via a
 						 * volatile bit.
 						 */
+#define SPI_NOR_SWP_IS_VOLATILE	BIT(22)	/*
+					 * Flash has volatile software write
+					 * protection bits. Usually these will
+					 * power-up in a write-protected state.
+					 */
 
 	/* Part specific fixup hooks. */
 	const struct spi_nor_fixups *fixups;
@@ -430,6 +436,8 @@ void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+int spi_nor_read_sr(struct spi_nor *nor, u8 *sr);
+int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len);
 int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
 
 int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c
index c93170008118..cfc9218c1053 100644
--- a/drivers/mtd/spi-nor/esmt.c
+++ b/drivers/mtd/spi-nor/esmt.c
@@ -11,7 +11,7 @@
 static const struct flash_info esmt_parts[] = {
 	/* ESMT */
 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
-			   SECT_4K | SPI_NOR_HAS_LOCK) },
+			   SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
 			   SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
diff --git a/drivers/mtd/spi-nor/intel.c b/drivers/mtd/spi-nor/intel.c
index 6c31bef3fc60..8ece9cceb3cf 100644
--- a/drivers/mtd/spi-nor/intel.c
+++ b/drivers/mtd/spi-nor/intel.c
@@ -10,9 +10,12 @@
 
 static const struct flash_info intel_parts[] = {
 	/* Intel/Numonyx -- xxxs33b */
-	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, SPI_NOR_HAS_LOCK) },
-	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, SPI_NOR_HAS_LOCK) },
-	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, SPI_NOR_HAS_LOCK) },
+	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32,
+			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64,
+			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
+	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128,
+			   SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 };
 
 const struct spi_nor_manufacturer spi_nor_intel = {
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
index 0d9d319f61e6..00e48da0744a 100644
--- a/drivers/mtd/spi-nor/sst.c
+++ b/drivers/mtd/spi-nor/sst.c
@@ -11,27 +11,28 @@
 static const struct flash_info sst_parts[] = {
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128,
-			      SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SPI_NOR_4BIT_BP | SPI_NOR_HAS_LOCK |
+			      SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K | SPI_NOR_HAS_LOCK) },
 	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
-			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK) },
+			      SECT_4K | SST_WRITE | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) },
 	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ) },
-- 
2.20.1

Re: [PATCH v8 0/7] mtd: spi-nor: keep lock bits if they are non-volatile

[Vignesh Raghavendra]

Hi Michael,

On Thu, 3 Dec 2020 17:29:52 +0100, Michael Walle wrote:
> I bundled this as a series, because otherwise there will be conflicts
> because the "remove global protection flag" patches modify the same lines
> as the main patch.
> 
> There are now two more patches:
>   mtd: spi-nor: sst: fix BPn bits for the SST25VF064C
>   mtd: spi-nor: ignore errors in spi_nor_unlock_all()
> Both are fixes and are first in this series. This will ensure that they
> might be cherry-picked without conflicts as the following patches touches
> the same lines.
> 
> [...]

Appreciate all the hard work!

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git spi-nor/next, thanks!
[1/7] mtd: spi-nor: sst: fix BPn bits for the SST25VF064C
      https://git.kernel.org/mtd/c/989d4b72ba
[2/7] mtd: spi-nor: ignore errors in spi_nor_unlock_all()
      https://git.kernel.org/mtd/c/bdb1a75e4b
[3/7] mtd: spi-nor: atmel: remove global protection flag
      https://git.kernel.org/mtd/c/e6204d4620
[4/7] mtd: spi-nor: sst: remove global protection flag
      https://git.kernel.org/mtd/c/a833383732
[5/7] mtd: spi-nor: intel: remove global protection flag
      https://git.kernel.org/mtd/c/afcf93e9d6
[6/7] mtd: spi-nor: atmel: fix unlock_all() for AT25FS010/040
      https://git.kernel.org/mtd/c/8c174d1511
[7/7] mtd: spi-nor: keep lock bits if they are non-volatile
      https://git.kernel.org/mtd/c/31ad3eff09

--
Regards
Vignesh