linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/4] tpm_tis: Detect interrupt storms
@ 2020-12-05  1:43 Jerry Snitselaar
  2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
                   ` (3 more replies)
  0 siblings, 4 replies; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-05  1:43 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Thomas Gleixner,
	Jani Nikula, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede

This patchset is an attempt to try and catch tpm_tis devices that have
interrupt storm issues, disable the interrupt, and use polling. In
2016 the tpm_tis interrupt code was accidently disabled, and polling
was just being used. When we initially tried to enable interrupts
again there were some reports of systems being hit with interrupt
storms. It turned out that the ThinkPad T490s had misconfigured a gpio
pin being used for the interrupt.  The problem is more widespread
though, with interrupt storms also being seen on other platforms and
different TPM vendors. With the L490 the system hangs at tpm_tis
initialization even with the detection code, so change the earlier
detection code that used dmi to look for the T490s to instead look for
the L490 and disable interrupts.

Since kstat_irqs needs to be exported to allow building of tpm_tis
as a module, I've included a patch to change the i915_pmu code to
use kstat_irqs where before it was using its own version. If this
isn't desired it can be dropped.

I've been testing this on top of James' proposed patchset which
re-enables interrupts for tpm_tis. With the patchsets applied
it detects the problem on the T490s and on the Ice Lake development
system where I found the issue. I have Lenovo verifying that the
dmi detection code will now detect the L490 and avoid the hang
it experiences. I'm also working on getting access to an L490
to see if I can figure out what the underlying issue is.



Changes from v2:
	- Export kstat_irqs to allow building tpm_tis as a module.
    	- Change i915_pmu.c to use kstat_irqs instead of it's own
      	  version count_interrupts.
    	- Change include from linux/kernel_stat.h to linux/irq.h.
    	- Change dmi checking code to now look for L490 instead of
	  T490s.

Changes from v1:
	- drop tpm_tis specific workqueue and use just system_w.

Jerry Snitselaar (4):
  irq: export kstat_irqs
  drm/i915/pmu: Use kstat_irqs to get interrupt count
  tpm_tis: Disable interrupts if interrupt storm detected
  tpm_tis: Disable Interrupts on the ThinkPad L490


Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org 
Cc: dri-devel@lists.freedesktop.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-integrity@vger.kernel.org

 drivers/char/tpm/tpm_tis.c      |  4 ++--
 drivers/char/tpm/tpm_tis_core.c | 27 +++++++++++++++++++++++++++
 drivers/char/tpm/tpm_tis_core.h |  2 ++
 drivers/gpu/drm/i915/i915_pmu.c | 18 +-----------------
 include/linux/irqdesc.h         |  1 +
 kernel/irq/irqdesc.c            |  1 +
 6 files changed, 34 insertions(+), 19 deletions(-)

-- 
2.27.0


^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-05  1:43 [PATCH v3 0/4] tpm_tis: Detect interrupt storms Jerry Snitselaar
@ 2020-12-05  1:43 ` Jerry Snitselaar
  2020-12-05 10:39   ` Jarkko Sakkinen
  2020-12-06 17:54   ` Thomas Gleixner
  2020-12-05  1:43 ` [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count Jerry Snitselaar
                   ` (2 subsequent siblings)
  3 siblings, 2 replies; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-05  1:43 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, kernel test robot,
	Thomas Gleixner, Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe,
	James Bottomley, Matthew Garrett, Hans de Goede

To try and detect potential interrupt storms that
have been occurring with tpm_tis devices it was suggested
to use kstat_irqs() to get the number of interrupts.
Since tpm_tis can be built as a module it needs kstat_irqs
exported.

Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
 include/linux/irqdesc.h | 1 +
 kernel/irq/irqdesc.c    | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 5745491303e0..fff88c1f1ac6 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -153,6 +153,7 @@ static inline void generic_handle_irq_desc(struct irq_desc *desc)
 }
 
 int generic_handle_irq(unsigned int irq);
+unsigned int kstat_irqs(unsigned int irq);
 
 #ifdef CONFIG_HANDLE_DOMAIN_IRQ
 /*
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 1a7723604399..12398ef1796b 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -1000,6 +1000,7 @@ unsigned int kstat_irqs(unsigned int irq)
 		sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
 	return sum;
 }
+EXPORT_SYMBOL_GPL(kstat_irqs);
 
 /**
  * kstat_irqs_usr - Get the statistics for an interrupt
-- 
2.27.0


^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-05  1:43 [PATCH v3 0/4] tpm_tis: Detect interrupt storms Jerry Snitselaar
  2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
@ 2020-12-05  1:43 ` Jerry Snitselaar
  2020-12-06 16:38   ` Thomas Gleixner
  2020-12-05  1:43 ` [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected Jerry Snitselaar
  2020-12-05  1:43 ` [PATCH v3 4/4] tpm_tis: Disable Interrupts on the ThinkPad L490 Jerry Snitselaar
  3 siblings, 1 reply; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-05  1:43 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Thomas Gleixner,
	Jani Nikula, Rodrigo Vivi, David Airlie, Daniel Vetter,
	Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede

Now that kstat_irqs is exported, get rid of count_interrupts in
i915_pmu.c

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org 
Cc: dri-devel@lists.freedesktop.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
 drivers/gpu/drm/i915/i915_pmu.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
index 69c0fa20eba1..a3e63f03da8c 100644
--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -423,22 +423,6 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
 	return HRTIMER_RESTART;
 }
 
-static u64 count_interrupts(struct drm_i915_private *i915)
-{
-	/* open-coded kstat_irqs() */
-	struct irq_desc *desc = irq_to_desc(i915->drm.pdev->irq);
-	u64 sum = 0;
-	int cpu;
-
-	if (!desc || !desc->kstat_irqs)
-		return 0;
-
-	for_each_possible_cpu(cpu)
-		sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
-
-	return sum;
-}
-
 static void i915_pmu_event_destroy(struct perf_event *event)
 {
 	struct drm_i915_private *i915 =
@@ -581,7 +565,7 @@ static u64 __i915_pmu_event_read(struct perf_event *event)
 				   USEC_PER_SEC /* to MHz */);
 			break;
 		case I915_PMU_INTERRUPTS:
-			val = count_interrupts(i915);
+			val = kstat_irqs(i915->drm.pdev->irq);
 			break;
 		case I915_PMU_RC6_RESIDENCY:
 			val = get_rc6(&i915->gt);
-- 
2.27.0


^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-05  1:43 [PATCH v3 0/4] tpm_tis: Detect interrupt storms Jerry Snitselaar
  2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
  2020-12-05  1:43 ` [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count Jerry Snitselaar
@ 2020-12-05  1:43 ` Jerry Snitselaar
  2020-12-06 19:26   ` Thomas Gleixner
  2020-12-05  1:43 ` [PATCH v3 4/4] tpm_tis: Disable Interrupts on the ThinkPad L490 Jerry Snitselaar
  3 siblings, 1 reply; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-05  1:43 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede

When enabling the interrupt code for the tpm_tis driver we have
noticed some systems have a bios issue causing an interrupt storm to
occur. The issue isn't limited to a single tpm or system manufacturer
so keeping a denylist of systems with the issue isn't optimal. Instead
try to detect the problem occurring, disable interrupts, and revert to
polling when it happens.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
v3: - Change include from linux/kernel_stat.h to linux/irq.h
v2: - drop tpm_tis specific workqueue and use just system_w

drivers/char/tpm/tpm_tis_core.c | 27 +++++++++++++++++++++++++++
 drivers/char/tpm/tpm_tis_core.h |  2 ++
 2 files changed, 29 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 92c51c6cfd1b..d817ff5664d1 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -24,6 +24,8 @@
 #include <linux/wait.h>
 #include <linux/acpi.h>
 #include <linux/freezer.h>
+#include <linux/workqueue.h>
+#include <linux/irq.h>
 #include "tpm.h"
 #include "tpm_tis_core.h"
 
@@ -715,9 +717,23 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 {
 	struct tpm_chip *chip = dev_id;
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+	static bool check_storm = true;
+	static unsigned int check_start;
 	u32 interrupt;
 	int i, rc;
 
+	if (unlikely(check_storm)) {
+		if (!check_start) {
+			check_start = jiffies_to_msecs(jiffies);
+		} else if ((kstat_irqs(priv->irq) > 1000) &&
+			   (jiffies_to_msecs(jiffies) - check_start < 500)) {
+			check_storm = false;
+			schedule_work(&priv->storm_work);
+		} else if (jiffies_to_msecs(jiffies) - check_start >= 500) {
+			check_storm = false;
+		}
+	}
+
 	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
 	if (rc < 0)
 		return IRQ_NONE;
@@ -943,6 +959,14 @@ static const struct tpm_class_ops tpm_tis = {
 	.clk_enable = tpm_tis_clkrun_enable,
 };
 
+static void tpm_tis_storm_work(struct work_struct *work)
+{
+	struct tpm_tis_data *priv = container_of(work, struct tpm_tis_data, storm_work);
+
+	disable_interrupts(priv->chip);
+	dev_warn(&priv->chip->dev, "Interrupt storm detected, using polling.\n");
+}
+
 int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		      const struct tpm_tis_phy_ops *phy_ops,
 		      acpi_handle acpi_dev_handle)
@@ -959,6 +983,9 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (IS_ERR(chip))
 		return PTR_ERR(chip);
 
+	priv->chip = chip;
+	INIT_WORK(&priv->storm_work, tpm_tis_storm_work);
+
 #ifdef CONFIG_ACPI
 	chip->acpi_dev_handle = acpi_dev_handle;
 #endif
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 9b2d32a59f67..973297ee2e16 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -95,6 +95,8 @@ struct tpm_tis_data {
 	u16 clkrun_enabled;
 	wait_queue_head_t int_queue;
 	wait_queue_head_t read_queue;
+	struct work_struct storm_work;
+	struct tpm_chip *chip;
 	const struct tpm_tis_phy_ops *phy_ops;
 	unsigned short rng_quality;
 };
-- 
2.27.0


^ permalink raw reply	[flat|nested] 27+ messages in thread

* [PATCH v3 4/4] tpm_tis: Disable Interrupts on the ThinkPad L490
  2020-12-05  1:43 [PATCH v3 0/4] tpm_tis: Detect interrupt storms Jerry Snitselaar
                   ` (2 preceding siblings ...)
  2020-12-05  1:43 ` [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected Jerry Snitselaar
@ 2020-12-05  1:43 ` Jerry Snitselaar
  3 siblings, 0 replies; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-05  1:43 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede

The interrupt storm detection code detects the issue on the ThinkPad
T490s, but the L490 still hangs at initialization. So swap out the
T490s for the L490 in the dmi check.

Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Garrett <mjg59@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
 drivers/char/tpm/tpm_tis.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 4ed6e660273a..7322e0986a83 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -77,10 +77,10 @@ static int tpm_tis_disable_irq(const struct dmi_system_id *d)
 static const struct dmi_system_id tpm_tis_dmi_table[] = {
 	{
 		.callback = tpm_tis_disable_irq,
-		.ident = "ThinkPad T490s",
+		.ident = "ThinkPad L490",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L490"),
 		},
 	},
 	{}
-- 
2.27.0


^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
@ 2020-12-05 10:39   ` Jarkko Sakkinen
  2020-12-06 16:40     ` Thomas Gleixner
  2020-12-06 17:54   ` Thomas Gleixner
  1 sibling, 1 reply; 27+ messages in thread
From: Jarkko Sakkinen @ 2020-12-05 10:39 UTC (permalink / raw)
  To: Jerry Snitselaar
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel,
	kernel test robot, Thomas Gleixner, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede, Jiri Kosina, Yunfeng Ye, David Airlie,
	Daniel Vetter, jani.nikula, joonas.lahtinen

On Fri, Dec 04, 2020 at 06:43:37PM -0700, Jerry Snitselaar wrote:
> To try and detect potential interrupt storms that
> have been occurring with tpm_tis devices it was suggested
> to use kstat_irqs() to get the number of interrupts.
> Since tpm_tis can be built as a module it needs kstat_irqs
> exported.

I think you should also have a paragraph explicitly stating that
i915_pmu.c contains a duplicate of kstat_irqs() because it is not
exported as of today. It adds a lot more weight to this given that
there is already existing mainline usage (kind of).

> 
> Reported-by: kernel test robot <lkp@intel.com>

I'm not sure if this makes much sense.

> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jarkko Sakkinen <jarkko@kernel.org>
> Cc: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: Peter Huewe <peterhuewe@gmx.de>
> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
> Cc: Matthew Garrett <mjg59@google.com>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>

/Jarkko

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-05  1:43 ` [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count Jerry Snitselaar
@ 2020-12-06 16:38   ` Thomas Gleixner
  2020-12-06 21:33     ` Thomas Gleixner
                       ` (2 more replies)
  0 siblings, 3 replies; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 16:38 UTC (permalink / raw)
  To: Jerry Snitselaar, linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Jani Nikula, Rodrigo Vivi,
	David Airlie, Daniel Vetter, Jarkko Sakkinen, Jason Gunthorpe,
	Peter Huewe, James Bottomley, Matthew Garrett, Hans de Goede,
	Peter Zijlstra

On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:

> Now that kstat_irqs is exported, get rid of count_interrupts in
> i915_pmu.c
> --- a/drivers/gpu/drm/i915/i915_pmu.c
> +++ b/drivers/gpu/drm/i915/i915_pmu.c
> @@ -423,22 +423,6 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
>  	return HRTIMER_RESTART;
>  }
>  
> -static u64 count_interrupts(struct drm_i915_private *i915)
> -{
> -	/* open-coded kstat_irqs() */
> -	struct irq_desc *desc = irq_to_desc(i915->drm.pdev->irq);
> -	u64 sum = 0;
> -	int cpu;
> -
> -	if (!desc || !desc->kstat_irqs)
> -		return 0;
> -
> -	for_each_possible_cpu(cpu)
> -		sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
> -
> -	return sum;
> -}

May I ask why this has been merged in the first place?

Nothing in a driver has ever to fiddle with the internals of an irq
descriptor. We have functions for properly accessing them. Just because
C allows to fiddle with everything is not a justification. If the
required function is not exported then adding the export with a proper
explanation is not asked too much.

Also this lacks protection or at least a comment why this can be called
safely and is not subject to a concurrent removal of the irq descriptor.
The same problem exists when calling kstat_irqs(). It's even documented
at the top of the function.

Thanks,

        tglx



^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-05 10:39   ` Jarkko Sakkinen
@ 2020-12-06 16:40     ` Thomas Gleixner
  2020-12-06 17:40       ` James Bottomley
  0 siblings, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 16:40 UTC (permalink / raw)
  To: Jarkko Sakkinen, Jerry Snitselaar
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel,
	kernel test robot, Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe,
	James Bottomley, Matthew Garrett, Hans de Goede, Jiri Kosina,
	Yunfeng Ye, David Airlie, Daniel Vetter, jani.nikula,
	joonas.lahtinen

On Sat, Dec 05 2020 at 12:39, Jarkko Sakkinen wrote:
> On Fri, Dec 04, 2020 at 06:43:37PM -0700, Jerry Snitselaar wrote:
>> To try and detect potential interrupt storms that
>> have been occurring with tpm_tis devices it was suggested
>> to use kstat_irqs() to get the number of interrupts.
>> Since tpm_tis can be built as a module it needs kstat_irqs
>> exported.
>
> I think you should also have a paragraph explicitly stating that
> i915_pmu.c contains a duplicate of kstat_irqs() because it is not
> exported as of today. It adds a lot more weight to this given that
> there is already existing mainline usage (kind of).

It's abusage and just the fact that it exists is not an argument by
itself.

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-06 16:40     ` Thomas Gleixner
@ 2020-12-06 17:40       ` James Bottomley
  2020-12-06 19:29         ` Thomas Gleixner
  0 siblings, 1 reply; 27+ messages in thread
From: James Bottomley @ 2020-12-06 17:40 UTC (permalink / raw)
  To: Thomas Gleixner, Jarkko Sakkinen, Jerry Snitselaar
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel,
	kernel test robot, Jason Gunthorpe, Peter Huewe, Matthew Garrett,
	Hans de Goede, Jiri Kosina, Yunfeng Ye, David Airlie,
	Daniel Vetter, jani.nikula, joonas.lahtinen

On Sun, 2020-12-06 at 17:40 +0100, Thomas Gleixner wrote:
> On Sat, Dec 05 2020 at 12:39, Jarkko Sakkinen wrote:
> > On Fri, Dec 04, 2020 at 06:43:37PM -0700, Jerry Snitselaar wrote:
> > > To try and detect potential interrupt storms that
> > > have been occurring with tpm_tis devices it was suggested
> > > to use kstat_irqs() to get the number of interrupts.
> > > Since tpm_tis can be built as a module it needs kstat_irqs
> > > exported.
> > 
> > I think you should also have a paragraph explicitly stating that
> > i915_pmu.c contains a duplicate of kstat_irqs() because it is not
> > exported as of today. It adds a lot more weight to this given that
> > there is already existing mainline usage (kind of).
> 
> It's abusage and just the fact that it exists is not an argument by
> itself.

What we want is a count of the interrupts to see if we're having an
interrupt storm from the TPM device (some seem to be wired to fire the
interrupt even when there's no event to warrant it).  Since
kstat_irqs_user() does the correct RCU locking, should we be using that
instead?

James



^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
  2020-12-05 10:39   ` Jarkko Sakkinen
@ 2020-12-06 17:54   ` Thomas Gleixner
  2020-12-06 21:46     ` Jerry Snitselaar
  1 sibling, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 17:54 UTC (permalink / raw)
  To: Jerry Snitselaar, linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, kernel test robot,
	Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede

Jerry,

On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:

The proper prefix is 'genirq:' git log kernel/irq/irqdesc.c would have
told you. 

> To try and detect potential interrupt storms that
> have been occurring with tpm_tis devices it was suggested
> to use kstat_irqs() to get the number of interrupts.
> Since tpm_tis can be built as a module it needs kstat_irqs
> exported.

I'm not really enthused about exporting this without making it at least
safe. Using it from an interrupt handler is obviously safe vs. concurrent
removal, but the next driver writer who thinks this is cool is going to
get it wrong for sure.

Though I still have to figure out what the advantage of invoking a
function which needs to do a radix tree lookup over a device local
counter is just to keep track of this.

I'll reply on the TPM part of this as well.

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-05  1:43 ` [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected Jerry Snitselaar
@ 2020-12-06 19:26   ` Thomas Gleixner
  2020-12-07 19:28     ` Jason Gunthorpe
  0 siblings, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 19:26 UTC (permalink / raw)
  To: Jerry Snitselaar, linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede

Jerry,

On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
> @@ -715,9 +717,23 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
>  {
>  	struct tpm_chip *chip = dev_id;
>  	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
> +	static bool check_storm = true;
> +	static unsigned int check_start;

So this assumes that there can't be two TPMs which is probably true, but
everything else in this driver has stuff in tpm_tis_data per device.

>  	u32 interrupt;
>  	int i, rc;
>  
> +	if (unlikely(check_storm)) {
> +		if (!check_start) {
> +			check_start = jiffies_to_msecs(jiffies);

Yuck. I had to read that twice to figure out that it's correct vs. the
truncation of the result to unsigned int. You can spare that conversion
by simply doing

   unsigned long end_of_check = jiffies + HZ / 2;

and then the check becomes

    time_before(jiffies, end_of_check)

> +		} else if ((kstat_irqs(priv->irq) > 1000) &&
> +			   (jiffies_to_msecs(jiffies) - check_start < 500)) {

I assume you can't call disable_irq_nosync() here, but shouldn't this
shut up the interrupt at the TPM level right here?

> +			check_storm = false;
> +			schedule_work(&priv->storm_work);
> +		} else if (jiffies_to_msecs(jiffies) - check_start >= 500) {
> +			check_storm = false;
> +		}
> +	}

So back to kstat_irqs(). As this needs two extra variables anyway:

init()
	priv->irq_check = 1;
	priv->end_check = 0;

isr()
	if (unlikely(priv->irq_check)) {
		if (!priv->end_check) {
			priv->end_check = jiffies + HZ / 2;
		} else if (time_before(jiffies, priv->end_check)) {
			if (priv->irq_check++ > 1000)
				schedule_work(...);
		} else {
			priv->irq_check = 0;
		}
	}

Hmm? I still need to see an argument for an kstat_irqs() export being
superior.

Though I wonder whether such an infrastructure should be provided in the
irq core. Let me think about it.

Just as a side note. I was looking at tpm_tis_probe_irq_single() and
that function is leaking the interrupt request if any of the checks
afterwards fails, except for the final interrupt probe check which does
a cleanup. That means on fail before that the interrupt handler stays
requested up to the point where the module is removed. If that's a
shared interrupt and some other device is active on the same line, then
each interrupt from that device will call into the TPM code. Something
like the below is needed.

Also the X86 autoprobe mechanism is interesting:

	if (IS_ENABLED(CONFIG_X86))
		for (i = 3; i <= 15; i++)
			if (!tpm_tis_probe_irq_single(chip, intmask, 0, i))
				return;

The third argument is 'flags' which is handed to request_irq(). So that
won't ever be able to probe a shared interrupt. But if an interrupt
number > 0 is handed to tpm_tis_core_init() the interrupt is requested
with IRQF_SHARED. Same issue when the chip has an interrupt number in
the register. It's also requested exclusive which is pretty likely
to fail on ancient x86 machines.

The vast amount of comments didn't help to figure out what the reasoning
is.

Thanks,

        tglx
---
 drivers/char/tpm/tpm_tis_core.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -782,26 +782,26 @@ static int tpm_tis_probe_irq_single(stru
 	rc = tpm_tis_read8(priv, TPM_INT_VECTOR(priv->locality),
 			   &original_int_vec);
 	if (rc < 0)
-		return rc;
+		goto fail;
 
 	rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq);
 	if (rc < 0)
-		return rc;
+		goto fail;
 
 	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status);
 	if (rc < 0)
-		return rc;
+		goto fail;
 
 	/* Clear all existing */
 	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status);
 	if (rc < 0)
-		return rc;
+		goto fail;
 
 	/* Turn on */
 	rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality),
 			     intmask | TPM_GLOBAL_INT_ENABLE);
 	if (rc < 0)
-		return rc;
+		goto fail;
 
 	priv->irq_tested = false;
 
@@ -825,6 +825,10 @@ static int tpm_tis_probe_irq_single(stru
 	}
 
 	return 0;
+
+fail:
+	disable_interrupts(chip);
+	return rc;
 }
 
 /* Try to find the IRQ the TPM is using. This is for legacy x86 systems that

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-06 17:40       ` James Bottomley
@ 2020-12-06 19:29         ` Thomas Gleixner
  0 siblings, 0 replies; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 19:29 UTC (permalink / raw)
  To: James Bottomley, Jarkko Sakkinen, Jerry Snitselaar
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel,
	kernel test robot, Jason Gunthorpe, Peter Huewe, Matthew Garrett,
	Hans de Goede, Jiri Kosina, Yunfeng Ye, David Airlie,
	Daniel Vetter, jani.nikula, joonas.lahtinen

On Sun, Dec 06 2020 at 09:40, James Bottomley wrote:
> On Sun, 2020-12-06 at 17:40 +0100, Thomas Gleixner wrote:
>> On Sat, Dec 05 2020 at 12:39, Jarkko Sakkinen wrote:
>> > On Fri, Dec 04, 2020 at 06:43:37PM -0700, Jerry Snitselaar wrote:
>> > > To try and detect potential interrupt storms that
>> > > have been occurring with tpm_tis devices it was suggested
>> > > to use kstat_irqs() to get the number of interrupts.
>> > > Since tpm_tis can be built as a module it needs kstat_irqs
>> > > exported.
>> > 
>> > I think you should also have a paragraph explicitly stating that
>> > i915_pmu.c contains a duplicate of kstat_irqs() because it is not
>> > exported as of today. It adds a lot more weight to this given that
>> > there is already existing mainline usage (kind of).
>> 
>> It's abusage and just the fact that it exists is not an argument by
>> itself.
>
> What we want is a count of the interrupts to see if we're having an
> interrupt storm from the TPM device (some seem to be wired to fire the
> interrupt even when there's no event to warrant it).  Since
> kstat_irqs_user() does the correct RCU locking, should we be using that
> instead?

If we need to export it, yes. But I still have to understand the
value. See my other reply.

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-06 16:38   ` Thomas Gleixner
@ 2020-12-06 21:33     ` Thomas Gleixner
  2020-12-08  9:54       ` Jarkko Sakkinen
  2020-12-06 21:47     ` Jerry Snitselaar
  2020-12-10  7:53     ` [Intel-gfx] " Joonas Lahtinen
  2 siblings, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 21:33 UTC (permalink / raw)
  To: Jerry Snitselaar, linux-kernel
  Cc: linux-integrity, intel-gfx, dri-devel, Jani Nikula, Rodrigo Vivi,
	David Airlie, Daniel Vetter, Jarkko Sakkinen, Jason Gunthorpe,
	Peter Huewe, James Bottomley, Matthew Garrett, Hans de Goede,
	Peter Zijlstra

On Sun, Dec 06 2020 at 17:38, Thomas Gleixner wrote:
> On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
>> Now that kstat_irqs is exported, get rid of count_interrupts in
>> i915_pmu.c
>
> May I ask why this has been merged in the first place?
>
> Nothing in a driver has ever to fiddle with the internals of an irq
> descriptor. We have functions for properly accessing them. Just because
> C allows to fiddle with everything is not a justification. If the
> required function is not exported then adding the export with a proper
> explanation is not asked too much.
>
> Also this lacks protection or at least a comment why this can be called
> safely and is not subject to a concurrent removal of the irq descriptor.
> The same problem exists when calling kstat_irqs(). It's even documented
> at the top of the function.

And as pointed out vs. that TPM thing this really could have been a
trivial

    i915->irqs++;

in the interrupt handler and a read of that instead of iterating over
all possible cpus and summing it up. Oh well...

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 1/4] irq: export kstat_irqs
  2020-12-06 17:54   ` Thomas Gleixner
@ 2020-12-06 21:46     ` Jerry Snitselaar
  0 siblings, 0 replies; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-06 21:46 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel,
	kernel test robot, Jarkko Sakkinen, Jason Gunthorpe, Peter Huewe,
	James Bottomley, Matthew Garrett, Hans de Goede


Thomas Gleixner @ 2020-12-06 10:54 MST:

> Jerry,
>
> On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
>
> The proper prefix is 'genirq:' git log kernel/irq/irqdesc.c would have
> told you. 
>
>> To try and detect potential interrupt storms that
>> have been occurring with tpm_tis devices it was suggested
>> to use kstat_irqs() to get the number of interrupts.
>> Since tpm_tis can be built as a module it needs kstat_irqs
>> exported.
>
> I'm not really enthused about exporting this without making it at least
> safe. Using it from an interrupt handler is obviously safe vs. concurrent
> removal, but the next driver writer who thinks this is cool is going to
> get it wrong for sure.
>
> Though I still have to figure out what the advantage of invoking a
> function which needs to do a radix tree lookup over a device local
> counter is just to keep track of this.
>
> I'll reply on the TPM part of this as well.
>
> Thanks,
>
>         tglx

I can rework it to use a device local counter.


^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-06 16:38   ` Thomas Gleixner
  2020-12-06 21:33     ` Thomas Gleixner
@ 2020-12-06 21:47     ` Jerry Snitselaar
  2020-12-06 23:38       ` Thomas Gleixner
  2020-12-10  7:53     ` [Intel-gfx] " Joonas Lahtinen
  2 siblings, 1 reply; 27+ messages in thread
From: Jerry Snitselaar @ 2020-12-06 21:47 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel, Jani Nikula,
	Rodrigo Vivi, David Airlie, Daniel Vetter, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede, Peter Zijlstra


Thomas Gleixner @ 2020-12-06 09:38 MST:

> On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
>
>> Now that kstat_irqs is exported, get rid of count_interrupts in
>> i915_pmu.c
>> --- a/drivers/gpu/drm/i915/i915_pmu.c
>> +++ b/drivers/gpu/drm/i915/i915_pmu.c
>> @@ -423,22 +423,6 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
>>  	return HRTIMER_RESTART;
>>  }
>>  
>> -static u64 count_interrupts(struct drm_i915_private *i915)
>> -{
>> -	/* open-coded kstat_irqs() */
>> -	struct irq_desc *desc = irq_to_desc(i915->drm.pdev->irq);
>> -	u64 sum = 0;
>> -	int cpu;
>> -
>> -	if (!desc || !desc->kstat_irqs)
>> -		return 0;
>> -
>> -	for_each_possible_cpu(cpu)
>> -		sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
>> -
>> -	return sum;
>> -}
>
> May I ask why this has been merged in the first place?
>
> Nothing in a driver has ever to fiddle with the internals of an irq
> descriptor. We have functions for properly accessing them. Just because
> C allows to fiddle with everything is not a justification. If the
> required function is not exported then adding the export with a proper
> explanation is not asked too much.
>
> Also this lacks protection or at least a comment why this can be called
> safely and is not subject to a concurrent removal of the irq descriptor.
> The same problem exists when calling kstat_irqs(). It's even documented
> at the top of the function.
>
> Thanks,
>
>         tglx

I don't know the history behind this bit. I stumbled across it in cscope
when looking for places using kstat_irqs.


^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-06 21:47     ` Jerry Snitselaar
@ 2020-12-06 23:38       ` Thomas Gleixner
  0 siblings, 0 replies; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-06 23:38 UTC (permalink / raw)
  To: Jerry Snitselaar
  Cc: linux-kernel, linux-integrity, intel-gfx, dri-devel, Jani Nikula,
	Rodrigo Vivi, David Airlie, Daniel Vetter, Jarkko Sakkinen,
	Jason Gunthorpe, Peter Huewe, James Bottomley, Matthew Garrett,
	Hans de Goede, Peter Zijlstra

On Sun, Dec 06 2020 at 14:47, Jerry Snitselaar wrote:
> Thomas Gleixner @ 2020-12-06 09:38 MST:
>
> I don't know the history behind this bit. I stumbled across it in cscope
> when looking for places using kstat_irqs.

I'm not ranting at you. The i915 people are on Cc.

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-06 19:26   ` Thomas Gleixner
@ 2020-12-07 19:28     ` Jason Gunthorpe
  2020-12-07 19:58       ` James Bottomley
  2020-12-08 17:42       ` Jarkko Sakkinen
  0 siblings, 2 replies; 27+ messages in thread
From: Jason Gunthorpe @ 2020-12-07 19:28 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jerry Snitselaar, linux-kernel, linux-integrity, intel-gfx,
	dri-devel, Jarkko Sakkinen, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede

On Sun, Dec 06, 2020 at 08:26:16PM +0100, Thomas Gleixner wrote:
> Just as a side note. I was looking at tpm_tis_probe_irq_single() and
> that function is leaking the interrupt request if any of the checks
> afterwards fails, except for the final interrupt probe check which does
> a cleanup. That means on fail before that the interrupt handler stays
> requested up to the point where the module is removed. If that's a
> shared interrupt and some other device is active on the same line, then
> each interrupt from that device will call into the TPM code. Something
> like the below is needed.
> 
> Also the X86 autoprobe mechanism is interesting:
> 
> 	if (IS_ENABLED(CONFIG_X86))
> 		for (i = 3; i <= 15; i++)
> 			if (!tpm_tis_probe_irq_single(chip, intmask, 0, i))
> 				return;
> 
> The third argument is 'flags' which is handed to request_irq(). So that
> won't ever be able to probe a shared interrupt. But if an interrupt
> number > 0 is handed to tpm_tis_core_init() the interrupt is requested
> with IRQF_SHARED. Same issue when the chip has an interrupt number in
> the register. It's also requested exclusive which is pretty likely
> to fail on ancient x86 machines.

It is very likely none of this works any more, it has been repeatedly
reworked over the years and just left behind out of fear someone needs
it. I've thought it should be deleted for a while now.

I suppose the original logic was to try and probe without SHARED
because a probe would need exclusive access to the interrupt to tell
if the TPM was actually the source, not some other device.

It is all very old and very out of step with current thinking, IMHO. I
skeptical that TPM interrupts were ever valuable enough to deserve
this in the first place.

Jason

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-07 19:28     ` Jason Gunthorpe
@ 2020-12-07 19:58       ` James Bottomley
  2020-12-08 17:43         ` Jarkko Sakkinen
  2020-12-08 17:42       ` Jarkko Sakkinen
  1 sibling, 1 reply; 27+ messages in thread
From: James Bottomley @ 2020-12-07 19:58 UTC (permalink / raw)
  To: Jason Gunthorpe, Thomas Gleixner
  Cc: Jerry Snitselaar, linux-kernel, linux-integrity, intel-gfx,
	dri-devel, Jarkko Sakkinen, Peter Huewe, Matthew Garrett,
	Hans de Goede

On Mon, 2020-12-07 at 15:28 -0400, Jason Gunthorpe wrote:
> On Sun, Dec 06, 2020 at 08:26:16PM +0100, Thomas Gleixner wrote:
> > Just as a side note. I was looking at tpm_tis_probe_irq_single()
> > and that function is leaking the interrupt request if any of the
> > checks afterwards fails, except for the final interrupt probe check
> > which does a cleanup. That means on fail before that the interrupt
> > handler stays requested up to the point where the module is
> > removed. If that's a shared interrupt and some other device is
> > active on the same line, then each interrupt from that device will
> > call into the TPM code. Something like the below is needed.
> > 
> > Also the X86 autoprobe mechanism is interesting:
> > 
> > 	if (IS_ENABLED(CONFIG_X86))
> > 		for (i = 3; i <= 15; i++)
> > 			if (!tpm_tis_probe_irq_single(chip, intmask, 0,
> > i))
> > 				return;
> > 
> > The third argument is 'flags' which is handed to request_irq(). So
> > that won't ever be able to probe a shared interrupt. But if an
> > interrupt number > 0 is handed to tpm_tis_core_init() the interrupt
> > is requested with IRQF_SHARED. Same issue when the chip has an
> > interrupt number in the register. It's also requested exclusive
> > which is pretty likely to fail on ancient x86 machines.
> 
> It is very likely none of this works any more, it has been repeatedly
> reworked over the years and just left behind out of fear someone
> needs it. I've thought it should be deleted for a while now.
> 
> I suppose the original logic was to try and probe without SHARED
> because a probe would need exclusive access to the interrupt to tell
> if the TPM was actually the source, not some other device.
> 
> It is all very old and very out of step with current thinking, IMHO.
> I skeptical that TPM interrupts were ever valuable enough to deserve
> this in the first place.

For what it's worth, I agree.  Trying to probe all 15 ISA interrupts is
last millennium thinking we should completely avoid.  If it's not
described in ACPI then you don't get an interrupt full stop.

James



^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-06 21:33     ` Thomas Gleixner
@ 2020-12-08  9:54       ` Jarkko Sakkinen
  0 siblings, 0 replies; 27+ messages in thread
From: Jarkko Sakkinen @ 2020-12-08  9:54 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jerry Snitselaar, linux-kernel, linux-integrity, intel-gfx,
	dri-devel, Jani Nikula, Rodrigo Vivi, David Airlie,
	Daniel Vetter, Jason Gunthorpe, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede, Peter Zijlstra

On Sun, Dec 06, 2020 at 10:33:09PM +0100, Thomas Gleixner wrote:
> On Sun, Dec 06 2020 at 17:38, Thomas Gleixner wrote:
> > On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
> >> Now that kstat_irqs is exported, get rid of count_interrupts in
> >> i915_pmu.c
> >
> > May I ask why this has been merged in the first place?
> >
> > Nothing in a driver has ever to fiddle with the internals of an irq
> > descriptor. We have functions for properly accessing them. Just because
> > C allows to fiddle with everything is not a justification. If the
> > required function is not exported then adding the export with a proper
> > explanation is not asked too much.
> >
> > Also this lacks protection or at least a comment why this can be called
> > safely and is not subject to a concurrent removal of the irq descriptor.
> > The same problem exists when calling kstat_irqs(). It's even documented
> > at the top of the function.
> 
> And as pointed out vs. that TPM thing this really could have been a
> trivial
> 
>     i915->irqs++;
> 
> in the interrupt handler and a read of that instead of iterating over
> all possible cpus and summing it up. Oh well...

I'm fine with that. 

> Thanks,
> 
>         tglx

/Jarkko

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-07 19:28     ` Jason Gunthorpe
  2020-12-07 19:58       ` James Bottomley
@ 2020-12-08 17:42       ` Jarkko Sakkinen
  1 sibling, 0 replies; 27+ messages in thread
From: Jarkko Sakkinen @ 2020-12-08 17:42 UTC (permalink / raw)
  To: Jason Gunthorpe
  Cc: Thomas Gleixner, Jerry Snitselaar, linux-kernel, linux-integrity,
	intel-gfx, dri-devel, Peter Huewe, James Bottomley,
	Matthew Garrett, Hans de Goede

On Mon, Dec 07, 2020 at 03:28:03PM -0400, Jason Gunthorpe wrote:
> On Sun, Dec 06, 2020 at 08:26:16PM +0100, Thomas Gleixner wrote:
> > Just as a side note. I was looking at tpm_tis_probe_irq_single() and
> > that function is leaking the interrupt request if any of the checks
> > afterwards fails, except for the final interrupt probe check which does
> > a cleanup. That means on fail before that the interrupt handler stays
> > requested up to the point where the module is removed. If that's a
> > shared interrupt and some other device is active on the same line, then
> > each interrupt from that device will call into the TPM code. Something
> > like the below is needed.
> > 
> > Also the X86 autoprobe mechanism is interesting:
> > 
> > 	if (IS_ENABLED(CONFIG_X86))
> > 		for (i = 3; i <= 15; i++)
> > 			if (!tpm_tis_probe_irq_single(chip, intmask, 0, i))
> > 				return;
> > 
> > The third argument is 'flags' which is handed to request_irq(). So that
> > won't ever be able to probe a shared interrupt. But if an interrupt
> > number > 0 is handed to tpm_tis_core_init() the interrupt is requested
> > with IRQF_SHARED. Same issue when the chip has an interrupt number in
> > the register. It's also requested exclusive which is pretty likely
> > to fail on ancient x86 machines.
> 
> It is very likely none of this works any more, it has been repeatedly
> reworked over the years and just left behind out of fear someone needs
> it. I've thought it should be deleted for a while now.
> 
> I suppose the original logic was to try and probe without SHARED
> because a probe would need exclusive access to the interrupt to tell
> if the TPM was actually the source, not some other device.
> 
> It is all very old and very out of step with current thinking, IMHO. I
> skeptical that TPM interrupts were ever valuable enough to deserve
> this in the first place.
> 
> Jason

+1 for removing it.

/Jarkko

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected
  2020-12-07 19:58       ` James Bottomley
@ 2020-12-08 17:43         ` Jarkko Sakkinen
  0 siblings, 0 replies; 27+ messages in thread
From: Jarkko Sakkinen @ 2020-12-08 17:43 UTC (permalink / raw)
  To: James Bottomley
  Cc: Jason Gunthorpe, Thomas Gleixner, Jerry Snitselaar, linux-kernel,
	linux-integrity, intel-gfx, dri-devel, Peter Huewe,
	Matthew Garrett, Hans de Goede

On Mon, Dec 07, 2020 at 11:58:44AM -0800, James Bottomley wrote:
> On Mon, 2020-12-07 at 15:28 -0400, Jason Gunthorpe wrote:
> > On Sun, Dec 06, 2020 at 08:26:16PM +0100, Thomas Gleixner wrote:
> > > Just as a side note. I was looking at tpm_tis_probe_irq_single()
> > > and that function is leaking the interrupt request if any of the
> > > checks afterwards fails, except for the final interrupt probe check
> > > which does a cleanup. That means on fail before that the interrupt
> > > handler stays requested up to the point where the module is
> > > removed. If that's a shared interrupt and some other device is
> > > active on the same line, then each interrupt from that device will
> > > call into the TPM code. Something like the below is needed.
> > > 
> > > Also the X86 autoprobe mechanism is interesting:
> > > 
> > > 	if (IS_ENABLED(CONFIG_X86))
> > > 		for (i = 3; i <= 15; i++)
> > > 			if (!tpm_tis_probe_irq_single(chip, intmask, 0,
> > > i))
> > > 				return;
> > > 
> > > The third argument is 'flags' which is handed to request_irq(). So
> > > that won't ever be able to probe a shared interrupt. But if an
> > > interrupt number > 0 is handed to tpm_tis_core_init() the interrupt
> > > is requested with IRQF_SHARED. Same issue when the chip has an
> > > interrupt number in the register. It's also requested exclusive
> > > which is pretty likely to fail on ancient x86 machines.
> > 
> > It is very likely none of this works any more, it has been repeatedly
> > reworked over the years and just left behind out of fear someone
> > needs it. I've thought it should be deleted for a while now.
> > 
> > I suppose the original logic was to try and probe without SHARED
> > because a probe would need exclusive access to the interrupt to tell
> > if the TPM was actually the source, not some other device.
> > 
> > It is all very old and very out of step with current thinking, IMHO.
> > I skeptical that TPM interrupts were ever valuable enough to deserve
> > this in the first place.
> 
> For what it's worth, I agree.  Trying to probe all 15 ISA interrupts is
> last millennium thinking we should completely avoid.  If it's not
> described in ACPI then you don't get an interrupt full stop.
> 
> James

Maybe you could add this as part of your patches?

/Jarkko

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-06 16:38   ` Thomas Gleixner
  2020-12-06 21:33     ` Thomas Gleixner
  2020-12-06 21:47     ` Jerry Snitselaar
@ 2020-12-10  7:53     ` Joonas Lahtinen
  2020-12-10 10:45       ` Tvrtko Ursulin
  2 siblings, 1 reply; 27+ messages in thread
From: Joonas Lahtinen @ 2020-12-10  7:53 UTC (permalink / raw)
  To: Jerry Snitselaar, Thomas Gleixner, linux-kernel, Tvrtko Ursulin,
	Chris Wilson
  Cc: Peter Zijlstra, David Airlie, Matthew Garrett, intel-gfx,
	James Bottomley, Jason Gunthorpe, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe

+ Tvrtko and Chris for comments

Code seems to be added in:

commit 0cd4684d6ea9a4ffec33fc19de4dd667bb90d0a5
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Tue Nov 21 18:18:50 2017 +0000

    drm/i915/pmu: Add interrupt count metric

I think later in the thread there was a suggestion to replace this with
simple counter increment in IRQ handler.

Regards, Joonas

Quoting Thomas Gleixner (2020-12-06 18:38:44)
> On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
> 
> > Now that kstat_irqs is exported, get rid of count_interrupts in
> > i915_pmu.c
> > --- a/drivers/gpu/drm/i915/i915_pmu.c
> > +++ b/drivers/gpu/drm/i915/i915_pmu.c
> > @@ -423,22 +423,6 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
> >       return HRTIMER_RESTART;
> >  }
> >  
> > -static u64 count_interrupts(struct drm_i915_private *i915)
> > -{
> > -     /* open-coded kstat_irqs() */
> > -     struct irq_desc *desc = irq_to_desc(i915->drm.pdev->irq);
> > -     u64 sum = 0;
> > -     int cpu;
> > -
> > -     if (!desc || !desc->kstat_irqs)
> > -             return 0;
> > -
> > -     for_each_possible_cpu(cpu)
> > -             sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
> > -
> > -     return sum;
> > -}
> 
> May I ask why this has been merged in the first place?
> 
> Nothing in a driver has ever to fiddle with the internals of an irq
> descriptor. We have functions for properly accessing them. Just because
> C allows to fiddle with everything is not a justification. If the
> required function is not exported then adding the export with a proper
> explanation is not asked too much.
> 
> Also this lacks protection or at least a comment why this can be called
> safely and is not subject to a concurrent removal of the irq descriptor.
> The same problem exists when calling kstat_irqs(). It's even documented
> at the top of the function.
> 
> Thanks,
> 
>         tglx
> 
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-10  7:53     ` [Intel-gfx] " Joonas Lahtinen
@ 2020-12-10 10:45       ` Tvrtko Ursulin
  2020-12-10 16:35         ` Thomas Gleixner
  0 siblings, 1 reply; 27+ messages in thread
From: Tvrtko Ursulin @ 2020-12-10 10:45 UTC (permalink / raw)
  To: Joonas Lahtinen, Jerry Snitselaar, Thomas Gleixner, linux-kernel,
	Tvrtko Ursulin, Chris Wilson
  Cc: Jason Gunthorpe, Peter Zijlstra, intel-gfx, Matthew Garrett,
	James Bottomley, David Airlie, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe


On 10/12/2020 07:53, Joonas Lahtinen wrote:
> + Tvrtko and Chris for comments
> 
> Code seems to be added in:
> 
> commit 0cd4684d6ea9a4ffec33fc19de4dd667bb90d0a5
> Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> Date:   Tue Nov 21 18:18:50 2017 +0000
> 
>      drm/i915/pmu: Add interrupt count metric
> 
> I think later in the thread there was a suggestion to replace this with
> simple counter increment in IRQ handler.

It was indeed unsafe until recent b00bccb3f0bb ("drm/i915/pmu: Handle 
PCI unbind") but now should be fine.

If kstat_irqs does not get exported it is easy enough for i915 to keep a 
local counter. Reasoning was very infrequent per cpu summation is much 
cheaper than very frequent atomic add. Up to thousands of interrupts per 
second vs "once per second" PMU read kind of thing.

Regards,

Tvrtko

> Quoting Thomas Gleixner (2020-12-06 18:38:44)
>> On Fri, Dec 04 2020 at 18:43, Jerry Snitselaar wrote:
>>
>>> Now that kstat_irqs is exported, get rid of count_interrupts in
>>> i915_pmu.c
>>> --- a/drivers/gpu/drm/i915/i915_pmu.c
>>> +++ b/drivers/gpu/drm/i915/i915_pmu.c
>>> @@ -423,22 +423,6 @@ static enum hrtimer_restart i915_sample(struct hrtimer *hrtimer)
>>>        return HRTIMER_RESTART;
>>>   }
>>>   
>>> -static u64 count_interrupts(struct drm_i915_private *i915)
>>> -{
>>> -     /* open-coded kstat_irqs() */
>>> -     struct irq_desc *desc = irq_to_desc(i915->drm.pdev->irq);
>>> -     u64 sum = 0;
>>> -     int cpu;
>>> -
>>> -     if (!desc || !desc->kstat_irqs)
>>> -             return 0;
>>> -
>>> -     for_each_possible_cpu(cpu)
>>> -             sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
>>> -
>>> -     return sum;
>>> -}
>>
>> May I ask why this has been merged in the first place?
>>
>> Nothing in a driver has ever to fiddle with the internals of an irq
>> descriptor. We have functions for properly accessing them. Just because
>> C allows to fiddle with everything is not a justification. If the
>> required function is not exported then adding the export with a proper
>> explanation is not asked too much.
>>
>> Also this lacks protection or at least a comment why this can be called
>> safely and is not subject to a concurrent removal of the irq descriptor.
>> The same problem exists when calling kstat_irqs(). It's even documented
>> at the top of the function.
>>
>> Thanks,
>>
>>          tglx
>>
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-10 10:45       ` Tvrtko Ursulin
@ 2020-12-10 16:35         ` Thomas Gleixner
  2020-12-10 17:09           ` Tvrtko Ursulin
  0 siblings, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-10 16:35 UTC (permalink / raw)
  To: Tvrtko Ursulin, Joonas Lahtinen, Jerry Snitselaar, linux-kernel,
	Tvrtko Ursulin, Chris Wilson
  Cc: Jason Gunthorpe, Peter Zijlstra, intel-gfx, Matthew Garrett,
	James Bottomley, David Airlie, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe

On Thu, Dec 10 2020 at 10:45, Tvrtko Ursulin wrote:
> On 10/12/2020 07:53, Joonas Lahtinen wrote:
>> I think later in the thread there was a suggestion to replace this with
>> simple counter increment in IRQ handler.
>
> It was indeed unsafe until recent b00bccb3f0bb ("drm/i915/pmu: Handle 
> PCI unbind") but now should be fine.
>
> If kstat_irqs does not get exported it is easy enough for i915 to keep a 
> local counter. Reasoning was very infrequent per cpu summation is much 
> cheaper than very frequent atomic add. Up to thousands of interrupts per 
> second vs "once per second" PMU read kind of thing.

Why do you need a atomic_add? It's ONE interrupt which can only be
executed on ONE CPU at a time. Interrupt handlers are non-reentrant.

The core code function will just return an accumulated counter nowadays
which is only 32bit wide, which is what the interface provided forever.
That needs to be fixed first.

Aside of that the accounting is wrong when the interrupt line is shared
because the core accounts interrupt per line not per device sharing the
line. Don't know whether you care or not.

I'll send out a series addressing irq_to_desc() (ab)use all over the
place shortly. i915 is in there...

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-10 16:35         ` Thomas Gleixner
@ 2020-12-10 17:09           ` Tvrtko Ursulin
  2020-12-10 17:44             ` Thomas Gleixner
  0 siblings, 1 reply; 27+ messages in thread
From: Tvrtko Ursulin @ 2020-12-10 17:09 UTC (permalink / raw)
  To: Thomas Gleixner, Joonas Lahtinen, Jerry Snitselaar, linux-kernel,
	Tvrtko Ursulin, Chris Wilson
  Cc: Jason Gunthorpe, Peter Zijlstra, intel-gfx, Matthew Garrett,
	James Bottomley, David Airlie, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe


On 10/12/2020 16:35, Thomas Gleixner wrote:
> On Thu, Dec 10 2020 at 10:45, Tvrtko Ursulin wrote:
>> On 10/12/2020 07:53, Joonas Lahtinen wrote:
>>> I think later in the thread there was a suggestion to replace this with
>>> simple counter increment in IRQ handler.
>>
>> It was indeed unsafe until recent b00bccb3f0bb ("drm/i915/pmu: Handle
>> PCI unbind") but now should be fine.
>>
>> If kstat_irqs does not get exported it is easy enough for i915 to keep a
>> local counter. Reasoning was very infrequent per cpu summation is much
>> cheaper than very frequent atomic add. Up to thousands of interrupts per
>> second vs "once per second" PMU read kind of thing.
> 
> Why do you need a atomic_add? It's ONE interrupt which can only be
> executed on ONE CPU at a time. Interrupt handlers are non-reentrant.
> 
> The core code function will just return an accumulated counter nowadays
> which is only 32bit wide, which is what the interface provided forever.
> That needs to be fixed first.
> 
> Aside of that the accounting is wrong when the interrupt line is shared
> because the core accounts interrupt per line not per device sharing the
> line. Don't know whether you care or not.
> 
> I'll send out a series addressing irq_to_desc() (ab)use all over the
> place shortly. i915 is in there...

Yep we don't need atomic, my bad. And we would care about the shared 
interrupt line. And without atomic the extra accounting falls way below 
noise.

So in the light of it all, it sounds best I just quickly replace our 
abuse with private counting and then you don't have to deal with it in 
your series.

Regards,

Tvrtko

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-10 17:09           ` Tvrtko Ursulin
@ 2020-12-10 17:44             ` Thomas Gleixner
  2020-12-10 17:51               ` Tvrtko Ursulin
  0 siblings, 1 reply; 27+ messages in thread
From: Thomas Gleixner @ 2020-12-10 17:44 UTC (permalink / raw)
  To: Tvrtko Ursulin, Joonas Lahtinen, Jerry Snitselaar, linux-kernel,
	Tvrtko Ursulin, Chris Wilson
  Cc: Jason Gunthorpe, Peter Zijlstra, intel-gfx, Matthew Garrett,
	James Bottomley, David Airlie, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe

On Thu, Dec 10 2020 at 17:09, Tvrtko Ursulin wrote:
> On 10/12/2020 16:35, Thomas Gleixner wrote:
>> I'll send out a series addressing irq_to_desc() (ab)use all over the
>> place shortly. i915 is in there...
>
> Yep we don't need atomic, my bad. And we would care about the shared 
> interrupt line. And without atomic the extra accounting falls way below 
> noise.

You have to be careful though. If you make the accumulated counter 64
bit wide then you need to be careful vs. 32bit machines.

> So in the light of it all, it sounds best I just quickly replace our 
> abuse with private counting and then you don't have to deal with it in 
> your series.

I mostly have it. Still chewing on the 32bit vs. 64bit thing. And
keeping it in my series allows me to remove the export of irq_to_desc()
at the end without waiting for your tree to be merged.

Give me a few.

Thanks,

        tglx

^ permalink raw reply	[flat|nested] 27+ messages in thread

* Re: [Intel-gfx] [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count
  2020-12-10 17:44             ` Thomas Gleixner
@ 2020-12-10 17:51               ` Tvrtko Ursulin
  0 siblings, 0 replies; 27+ messages in thread
From: Tvrtko Ursulin @ 2020-12-10 17:51 UTC (permalink / raw)
  To: Thomas Gleixner, Joonas Lahtinen, Jerry Snitselaar, linux-kernel,
	Tvrtko Ursulin, Chris Wilson
  Cc: Jason Gunthorpe, Peter Zijlstra, intel-gfx, Matthew Garrett,
	James Bottomley, David Airlie, Jarkko Sakkinen, dri-devel,
	linux-integrity, Peter Huewe


On 10/12/2020 17:44, Thomas Gleixner wrote:
> On Thu, Dec 10 2020 at 17:09, Tvrtko Ursulin wrote:
>> On 10/12/2020 16:35, Thomas Gleixner wrote:
>>> I'll send out a series addressing irq_to_desc() (ab)use all over the
>>> place shortly. i915 is in there...
>>
>> Yep we don't need atomic, my bad. And we would care about the shared
>> interrupt line. And without atomic the extra accounting falls way below
>> noise.
> 
> You have to be careful though. If you make the accumulated counter 64
> bit wide then you need to be careful vs. 32bit machines.

Yep, thanks, I am bad jumping from one thing to another. Forgot about 
the read side atomicity completely..

>> So in the light of it all, it sounds best I just quickly replace our
>> abuse with private counting and then you don't have to deal with it in
>> your series.
> 
> I mostly have it. Still chewing on the 32bit vs. 64bit thing. And
> keeping it in my series allows me to remove the export of irq_to_desc()
> at the end without waiting for your tree to be merged.
> 
> Give me a few.

Ok.

Regards,

Tvrtko

^ permalink raw reply	[flat|nested] 27+ messages in thread

end of thread, other threads:[~2020-12-10 17:56 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-05  1:43 [PATCH v3 0/4] tpm_tis: Detect interrupt storms Jerry Snitselaar
2020-12-05  1:43 ` [PATCH v3 1/4] irq: export kstat_irqs Jerry Snitselaar
2020-12-05 10:39   ` Jarkko Sakkinen
2020-12-06 16:40     ` Thomas Gleixner
2020-12-06 17:40       ` James Bottomley
2020-12-06 19:29         ` Thomas Gleixner
2020-12-06 17:54   ` Thomas Gleixner
2020-12-06 21:46     ` Jerry Snitselaar
2020-12-05  1:43 ` [PATCH v3 2/4] drm/i915/pmu: Use kstat_irqs to get interrupt count Jerry Snitselaar
2020-12-06 16:38   ` Thomas Gleixner
2020-12-06 21:33     ` Thomas Gleixner
2020-12-08  9:54       ` Jarkko Sakkinen
2020-12-06 21:47     ` Jerry Snitselaar
2020-12-06 23:38       ` Thomas Gleixner
2020-12-10  7:53     ` [Intel-gfx] " Joonas Lahtinen
2020-12-10 10:45       ` Tvrtko Ursulin
2020-12-10 16:35         ` Thomas Gleixner
2020-12-10 17:09           ` Tvrtko Ursulin
2020-12-10 17:44             ` Thomas Gleixner
2020-12-10 17:51               ` Tvrtko Ursulin
2020-12-05  1:43 ` [PATCH v3 3/4] tpm_tis: Disable interrupts if interrupt storm detected Jerry Snitselaar
2020-12-06 19:26   ` Thomas Gleixner
2020-12-07 19:28     ` Jason Gunthorpe
2020-12-07 19:58       ` James Bottomley
2020-12-08 17:43         ` Jarkko Sakkinen
2020-12-08 17:42       ` Jarkko Sakkinen
2020-12-05  1:43 ` [PATCH v3 4/4] tpm_tis: Disable Interrupts on the ThinkPad L490 Jerry Snitselaar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).