[PATCH v2 0/3] Intel Speed Select interface changes for 5.11

[PATCH v2 0/3] Intel Speed Select interface changes for 5.11

[Srinivas Pandruvada]

v2
Fix sparse warnings reported by LKP.

Srinivas Pandruvada (3):
  platform/x86: ISST: Check for unaligned mmio address
  platform/x86: ISST: Allow configurable offset range
  platform/x86: ISST: Change PCI device macros

 .../intel_speed_select_if/isst_if_common.h    |  8 +--
 .../intel_speed_select_if/isst_if_mbox_pci.c  |  4 +-
 .../x86/intel_speed_select_if/isst_if_mmio.c  | 49 ++++++++++++++-----
 3 files changed, 42 insertions(+), 19 deletions(-)

-- 
2.25.4

[PATCH v2 1/3] platform/x86: ISST: Check for unaligned mmio address

[Srinivas Pandruvada]

The address should be aligned to 4 byte boundary. So send an error for
unaligned address.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
index aa17fd7817f8..e7e9808a1aed 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
@@ -42,6 +42,9 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
 	if (io_reg->reg < 0x04 || io_reg->reg > 0xD0)
 		return -EINVAL;
 
+	if (io_reg->reg % 4)
+		return -EINVAL;
+
 	if (io_reg->read_write && !capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-- 
2.25.4

[PATCH v2 2/3] platform/x86: ISST: Allow configurable offset range

[Srinivas Pandruvada]

The mmio offset range can be different based on the PCI device id. Here
for INTEL_RAPL_PRIO_DEVID_1, the range is increased from 45 to 64. Pass
the range as the driver_data. Also account for different ranges during
save/restore via suspend/resume callbacks.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
LKP test robot reported sparse warning. Added "Reported-by" as
suggested by the message.

 .../x86/intel_speed_select_if/isst_if_mmio.c  | 50 +++++++++++++------
 1 file changed, 36 insertions(+), 14 deletions(-)

diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
index e7e9808a1aed..4c9020249989 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
@@ -20,15 +20,21 @@ struct isst_mmio_range {
 	int end;
 };
 
-struct isst_mmio_range mmio_range[] = {
+static struct isst_mmio_range mmio_range_devid_0[] = {
 	{0x04, 0x14},
 	{0x20, 0xD0},
 };
 
+static struct isst_mmio_range mmio_range_devid_1[] = {
+	{0x04, 0x14},
+	{0x20, 0x11C},
+};
+
 struct isst_if_device {
 	void __iomem *punit_mmio;
 	u32 range_0[5];
-	u32 range_1[45];
+	u32 range_1[64];
+	struct isst_mmio_range *mmio_range;
 	struct mutex mutex;
 };
 
@@ -39,8 +45,6 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
 	struct pci_dev *pdev;
 
 	io_reg = (struct isst_if_io_reg *)cmd_ptr;
-	if (io_reg->reg < 0x04 || io_reg->reg > 0xD0)
-		return -EINVAL;
 
 	if (io_reg->reg % 4)
 		return -EINVAL;
@@ -56,6 +60,10 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
 	if (!punit_dev)
 		return -EINVAL;
 
+	if (io_reg->reg < punit_dev->mmio_range[0].beg ||
+	    io_reg->reg > punit_dev->mmio_range[1].end)
+		return -EINVAL;
+
 	/*
 	 * Ensure that operation is complete on a PCI device to avoid read
 	 * write race by using per PCI device mutex.
@@ -74,8 +82,10 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
 }
 
 static const struct pci_device_id isst_if_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)},
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0),
+		.driver_data = (kernel_ulong_t)&mmio_range_devid_0},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1),
+		.driver_data = (kernel_ulong_t)&mmio_range_devid_1},
 	{ 0 },
 };
 MODULE_DEVICE_TABLE(pci, isst_if_ids);
@@ -112,6 +122,7 @@ static int isst_if_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	mutex_init(&punit_dev->mutex);
 	pci_set_drvdata(pdev, punit_dev);
+	punit_dev->mmio_range = (struct isst_mmio_range *) ent->driver_data;
 
 	memset(&cb, 0, sizeof(cb));
 	cb.cmd_size = sizeof(struct isst_if_io_reg);
@@ -141,10 +152,15 @@ static int __maybe_unused isst_if_suspend(struct device *device)
 
 	for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i)
 		punit_dev->range_0[i] = readl(punit_dev->punit_mmio +
-						mmio_range[0].beg + 4 * i);
-	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i)
-		punit_dev->range_1[i] = readl(punit_dev->punit_mmio +
-						mmio_range[1].beg + 4 * i);
+						punit_dev->mmio_range[0].beg + 4 * i);
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) {
+		u32 addr;
+
+		addr = punit_dev->mmio_range[1].beg + 4 * i;
+		if (addr > punit_dev->mmio_range[1].end)
+			break;
+		punit_dev->range_1[i] = readl(punit_dev->punit_mmio + addr);
+	}
 
 	return 0;
 }
@@ -156,10 +172,16 @@ static int __maybe_unused isst_if_resume(struct device *device)
 
 	for (i = 0; i < ARRAY_SIZE(punit_dev->range_0); ++i)
 		writel(punit_dev->range_0[i], punit_dev->punit_mmio +
-						mmio_range[0].beg + 4 * i);
-	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i)
-		writel(punit_dev->range_1[i], punit_dev->punit_mmio +
-						mmio_range[1].beg + 4 * i);
+						punit_dev->mmio_range[0].beg + 4 * i);
+	for (i = 0; i < ARRAY_SIZE(punit_dev->range_1); ++i) {
+		u32 addr;
+
+		addr = punit_dev->mmio_range[1].beg + 4 * i;
+		if (addr > punit_dev->mmio_range[1].end)
+			break;
+
+		writel(punit_dev->range_1[i], punit_dev->punit_mmio + addr);
+	}
 
 	return 0;
 }
-- 
2.25.4

[PATCH v2 3/3] platform/x86: ISST: Change PCI device macros

[Srinivas Pandruvada]

Use PCI_VDEVICE and PCI_DEVICE_DATA macros. No functional changes are
expected.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 .../platform/x86/intel_speed_select_if/isst_if_common.h   | 8 ++++----
 .../platform/x86/intel_speed_select_if/isst_if_mbox_pci.c | 4 ++--
 drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c | 6 ++----
 3 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
index 4f6f7f0761fc..fdecdae248d7 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
@@ -10,11 +10,11 @@
 #ifndef __ISST_IF_COMMON_H
 #define __ISST_IF_COMMON_H
 
-#define INTEL_RAPL_PRIO_DEVID_0	0x3451
-#define INTEL_CFG_MBOX_DEVID_0	0x3459
+#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_0	0x3451
+#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0	0x3459
 
-#define INTEL_RAPL_PRIO_DEVID_1 0x3251
-#define INTEL_CFG_MBOX_DEVID_1  0x3259
+#define PCI_DEVICE_ID_INTEL_RAPL_PRIO_DEVID_1	0x3251
+#define PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1	0x3259
 
 /*
  * Validate maximum commands in a single request.
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c
index 95f01e7a87d5..a2a2d923e60c 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c
@@ -146,8 +146,8 @@ static long isst_if_mbox_proc_cmd(u8 *cmd_ptr, int *write_only, int resume)
 }
 
 static const struct pci_device_id isst_if_mbox_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_0)},
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_CFG_MBOX_DEVID_1)},
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_0)},
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CFG_MBOX_DEVID_1)},
 	{ 0 },
 };
 MODULE_DEVICE_TABLE(pci, isst_if_mbox_ids);
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
index 4c9020249989..ff49025ec085 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
@@ -82,10 +82,8 @@ static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
 }
 
 static const struct pci_device_id isst_if_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0),
-		.driver_data = (kernel_ulong_t)&mmio_range_devid_0},
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_1),
-		.driver_data = (kernel_ulong_t)&mmio_range_devid_1},
+	{ PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_0, &mmio_range_devid_0)},
+	{ PCI_DEVICE_DATA(INTEL, RAPL_PRIO_DEVID_1, &mmio_range_devid_1)},
 	{ 0 },
 };
 MODULE_DEVICE_TABLE(pci, isst_if_ids);
-- 
2.25.4

Re: [PATCH v2 0/3] Intel Speed Select interface changes for 5.11

[Hans de Goede]

Hi,

On 12/7/20 7:15 PM, Srinivas Pandruvada wrote:
> v2
> Fix sparse warnings reported by LKP.
> 
> Srinivas Pandruvada (3):
>   platform/x86: ISST: Check for unaligned mmio address
>   platform/x86: ISST: Allow configurable offset range
>   platform/x86: ISST: Change PCI device macros

I've already added these to the for-next branch of:

https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/

Please send the changes in this v2 as (a) follow-up
patch(es).

Regards,

Hans