linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Eric Anholt <eric@anholt.net>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>
Cc: Jason Cooper <jason@lakedaemon.net>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-arm-kernel@lists.infradead.org,
	Marc Zyngier <maz@kernel.org>,
	linux-media@vger.kernel.org,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	linux-kernel@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-rpi-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org
Subject: [PATCH 10/15] drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
Date: Thu, 10 Dec 2020 14:46:43 +0100	[thread overview]
Message-ID: <20201210134648.272857-11-maxime@cerno.tech> (raw)
In-Reply-To: <20201210134648.272857-1-maxime@cerno.tech>

The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.

Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 42 ++++++++++++++++++++++++++--------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  7 ++++++
 2 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 80a81fcea315..d208b7d1d937 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1593,9 +1593,11 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 			   ((3600 / usecs) << VC4_HDMI_CEC_CNT_TO_3600_US_SHIFT) |
 			   ((3500 / usecs) << VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT));
 
-		HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
+		if (!vc4_hdmi->variant->external_irq_controller)
+			HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
 	} else {
-		HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
+		if (!vc4_hdmi->variant->external_irq_controller)
+			HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
 		HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
 			   VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
 	}
@@ -1670,8 +1672,6 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
 	cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
 	cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
 
-	HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
-
 	value = HDMI_READ(HDMI_CEC_CNTRL_1);
 	/* Set the logical address to Unregistered */
 	value |= VC4_HDMI_CEC_ADDR_MASK;
@@ -1679,12 +1679,32 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
 
 	vc4_hdmi_cec_update_clk_div(vc4_hdmi);
 
-	ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
-					vc4_cec_irq_handler,
-					vc4_cec_irq_handler_thread, 0,
-					"vc4 hdmi cec", vc4_hdmi);
-	if (ret)
-		goto err_delete_cec_adap;
+	if (vc4_hdmi->variant->external_irq_controller) {
+		ret = devm_request_threaded_irq(&pdev->dev,
+						platform_get_irq_byname(pdev, "cec-rx"),
+						vc4_cec_irq_handler_rx_bare,
+						vc4_cec_irq_handler_rx_thread, 0,
+						"vc4 hdmi cec rx", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+
+		ret = devm_request_threaded_irq(&pdev->dev,
+						platform_get_irq_byname(pdev, "cec-tx"),
+						vc4_cec_irq_handler_tx_bare,
+						vc4_cec_irq_handler_tx_thread, 0,
+						"vc4 hdmi cec tx", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+	} else {
+		HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
+
+		ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
+						vc4_cec_irq_handler,
+						vc4_cec_irq_handler_thread, 0,
+						"vc4 hdmi cec", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+	}
 
 	ret = cec_register_adapter(vc4_hdmi->cec_adap, &pdev->dev);
 	if (ret < 0)
@@ -2083,6 +2103,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
 		PHY_LANE_CK,
 	},
 	.unsupported_odd_h_timings	= true,
+	.external_irq_controller	= true,
 
 	.init_resources		= vc5_hdmi_init_resources,
 	.csc_setup		= vc5_hdmi_csc_setup,
@@ -2109,6 +2130,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
 		PHY_LANE_2,
 	},
 	.unsupported_odd_h_timings	= true,
+	.external_irq_controller	= true,
 
 	.init_resources		= vc5_hdmi_init_resources,
 	.csc_setup		= vc5_hdmi_csc_setup,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index adc4bf33ff15..27352827f70c 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -64,6 +64,13 @@ struct vc4_hdmi_variant {
 	/* The BCM2711 cannot deal with odd horizontal pixel timings */
 	bool unsupported_odd_h_timings;
 
+	/*
+	 * The BCM2711 CEC/hotplug IRQ controller is shared between the
+	 * two HDMI controllers, and we have a proper irqchip driver for
+	 * it.
+	 */
+	bool external_irq_controller;
+
 	/* Callback to get the resources (memory region, interrupts,
 	 * clocks, etc) for that variant.
 	 */
-- 
2.28.0


  parent reply	other threads:[~2020-12-10 13:52 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10 13:46 [PATCH 00/15] drm/vc4: hdmi: Add CEC support for the BCM2711 Maxime Ripard
2020-12-10 13:46 ` [PATCH 01/15] irqchip: Allow to compile bcmstb on other platforms Maxime Ripard
2020-12-10 17:33   ` Florian Fainelli
2020-12-10 17:59   ` Marc Zyngier
2020-12-14 15:27     ` Maxime Ripard
2020-12-14 16:20       ` Marc Zyngier
2020-12-10 13:46 ` [PATCH 02/15] drm/vc4: hdmi: Move hdmi reset to bind Maxime Ripard
2020-12-18 11:20   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 03/15] drm/vc4: hdmi: Fix register offset with longer CEC messages Maxime Ripard
2020-12-15 11:23   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 04/15] drm/vc4: hdmi: Fix up CEC registers Maxime Ripard
2020-12-18 11:21   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 05/15] drm/vc4: hdmi: Restore cec physical address on reconnect Maxime Ripard
2020-12-18 14:21   ` Dave Stevenson
2020-12-18 14:45     ` Dave Stevenson
2021-01-11 10:29       ` Maxime Ripard
2020-12-10 13:46 ` [PATCH 06/15] drm/vc4: hdmi: Compute the CEC clock divider from the clock rate Maxime Ripard
2020-12-18 11:30   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 07/15] drm/vc4: hdmi: Update the CEC clock divider on HSM rate change Maxime Ripard
2020-12-18 14:26   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 08/15] drm/vc4: hdmi: Introduce a CEC clock Maxime Ripard
2020-12-18 11:37   ` Dave Stevenson
2020-12-18 12:23     ` Maxime Ripard
2020-12-18 12:25       ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 09/15] drm/vc4: hdmi: Split the interrupt handlers Maxime Ripard
2020-12-10 13:46 ` Maxime Ripard [this message]
2020-12-10 13:46 ` [PATCH 11/15] drm/vc4: hdmi: Remove cec_available flag Maxime Ripard
2020-12-18 14:30   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 12/15] drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts Maxime Ripard
2020-12-18 14:29   ` Dave Stevenson
2020-12-10 13:46 ` [PATCH 13/15] dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts Maxime Ripard
2020-12-10 13:46 ` [PATCH 14/15] ARM: dts: bcm2711: Add the BSC interrupt controller Maxime Ripard
2020-12-10 17:41   ` Florian Fainelli
2020-12-10 13:46 ` [PATCH 15/15] ARM: dts: bcm2711: Add the CEC " Maxime Ripard
2020-12-10 17:42   ` Florian Fainelli
2020-12-16 12:35 ` [PATCH 00/15] drm/vc4: hdmi: Add CEC support for the BCM2711 Hans Verkuil
2020-12-17 10:49   ` Maxime Ripard
2020-12-17 10:53     ` Hans Verkuil
2020-12-17 12:59       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210134648.272857-11-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maz@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).