[PATCH v4 0/2] ARM: dts: r8a7742-iwg21d-q7-dbcm: Add support for ov7725 sensors

[PATCH v4 0/2] ARM: dts: r8a7742-iwg21d-q7-dbcm: Add support for ov7725 sensors

[Geert Uytterhoeven]

	Hi Prabhakar,

This is an alternative version of your v3, decribing only a single
camera in each .dtsi file, to be included multiple times.

Thanks for your comments!

Lad Prabhakar (2):
  ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
  ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725
    sensors

 .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    | 155 +++++++++---------
 .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi |  30 ++++
 .../r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi |  27 +++
 3 files changed, 134 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes

[Geert Uytterhoeven]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The camera daughter board can also be connected to 8-bit ov7725 sensors,
so in preparation for configurable option to choose depending on the
camera's connected separate out the ov5640 nodes in a dtsi file.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v4:
  - Describe a single camera in the .dtsi file,
  - Include the .dtsi multiple times,

 .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    | 151 +++++++++---------
 .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi |  30 ++++
 2 files changed, 103 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,67 +91,12 @@ &hscif0 {
 	status = "okay";
 };
 
-&i2c0 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam1>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_0: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam2>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_1: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin1ep>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam3>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_2: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin2ep>;
-			};
-		};
-	};
 };
 
 &i2c3 {
@@ -160,23 +105,6 @@ &i2c3 {
 
 	status = "okay";
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam4>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_3: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin3ep>;
-			};
-		};
-	};
 };
 
 &pfc {
@@ -267,6 +195,21 @@ &scifb1 {
 	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
 };
 
+/*
+ * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
+ *
+ * Uncomment the #include statements to change configuration
+ */
+
+/* 8bit CMOS Camera 1 (J13) */
+#define CAM_PARENT_I2C		i2c0
+#define MCLK_CAM		mclk_cam1
+#define CAM_EP			cam0ep
+#define VIN_EP			vin0ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin0 {
 	/*
 	 * Set SW2 switch on the SOM to 'ON'
@@ -278,13 +221,28 @@ &vin0 {
 
 	port {
 		vin0ep: endpoint {
-			remote-endpoint = <&ov5640_0>;
+			remote-endpoint = <&cam0ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 2 (J14) */
+#define CAM_PARENT_I2C		i2c1
+#define MCLK_CAM		mclk_cam2
+#define CAM_EP			cam1ep
+#define VIN_EP			vin1ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin1 {
 	/* Set SW1 switch on the SOM to 'ON' */
 	status = "okay";
@@ -293,13 +251,29 @@ &vin1 {
 
 	port {
 		vin1ep: endpoint {
-			remote-endpoint = <&ov5640_1>;
+			remote-endpoint = <&cam1ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
 
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 3 (J12) */
+#define CAM_PARENT_I2C		i2c2
+#define MCLK_CAM		mclk_cam3
+#define CAM_EP			cam2ep
+#define VIN_EP			vin2ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin2 {
 	status = "okay";
 	pinctrl-0 = <&vin2_pins>;
@@ -307,14 +281,29 @@ &vin2 {
 
 	port {
 		vin2ep: endpoint {
-			remote-endpoint = <&ov5640_2>;
+			remote-endpoint = <&cam2ep>;
 			bus-width = <8>;
 			data-shift = <8>;
 			bus-type = <6>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 4 (J11) */
+#define CAM_PARENT_I2C		i2c3
+#define MCLK_CAM		mclk_cam4
+#define CAM_EP			cam3ep
+#define VIN_EP			vin3ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin3 {
 	status = "okay";
 	pinctrl-0 = <&vin3_pins>;
@@ -322,9 +311,15 @@ &vin3 {
 
 	port {
 		vin3ep: endpoint {
-			remote-endpoint = <&ov5640_3>;
+			remote-endpoint = <&cam3ep>;
 			bus-width = <8>;
 			bus-type = <6>;
 		};
 	};
 };
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
new file mode 100644
index 0000000000000000..408016620f5b1a04
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov5640 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define CAM_ENABLED	1
+
+&CAM_PARENT_I2C {
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&MCLK_CAM>;
+		clock-names = "xclk";
+		status = "okay";
+
+		port {
+			CAM_EP: endpoint {
+				bus-width = <8>;
+				data-shift = <2>;
+				bus-type = <6>;
+				pclk-sample = <1>;
+				remote-endpoint = <&VIN_EP>;
+			};
+		};
+	};
+};
-- 
2.25.1

[PATCH v4 2/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725 sensors

[Geert Uytterhoeven]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

The 8-bit ov7725 sensors can also be connected to the camera daughter
board.

This patch creates a separate dtsi file to describe an ov7725 sensor,
and includes it multiple times in r8a7742-iwg21d-q7-dbcm-ca.dts. The
user can (un)comment #include statements depending on the cameras
connected.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
v4:
  - Describe a single camera in the .dtsi file,
  - Include the .dtsi multiple times,

 .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    |  6 ++++-
 .../r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 27 +++++++++++++++++++
 2 files changed, 32 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 00634eb58ce39da5..4d95991bde09c28b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -198,7 +198,7 @@ &scifb1 {
 /*
  * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
  *
- * Uncomment the #include statements to change configuration
+ * (un)comment the #include statements to change configuration
  */
 
 /* 8bit CMOS Camera 1 (J13) */
@@ -208,6 +208,7 @@ &scifb1 {
 #define VIN_EP			vin0ep
 #undef CAM_ENABLED
 #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
 
 #ifdef CAM_ENABLED
 &vin0 {
@@ -241,6 +242,7 @@ vin0ep: endpoint {
 #define VIN_EP			vin1ep
 #undef CAM_ENABLED
 #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
 
 #ifdef CAM_ENABLED
 &vin1 {
@@ -272,6 +274,7 @@ vin1ep: endpoint {
 #define VIN_EP			vin2ep
 #undef CAM_ENABLED
 #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
 
 #ifdef CAM_ENABLED
 &vin2 {
@@ -302,6 +305,7 @@ vin2ep: endpoint {
 #define VIN_EP			vin3ep
 #undef CAM_ENABLED
 #include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
 
 #ifdef CAM_ENABLED
 &vin3 {
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
new file mode 100644
index 0000000000000000..46a6832694d78aaa
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov7725 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define CAM_ENABLED	1
+
+&CAM_PARENT_I2C {
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM>;
+		status = "okay";
+
+		port {
+			CAM_EP: endpoint {
+				bus-width = <8>;
+				bus-type = <6>;
+				remote-endpoint = <&VIN_EP>;
+			};
+		};
+	};
+};
-- 
2.25.1

RE: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes

[Prabhakar Mahadev Lad]

Hi Geert,

> -----Original Message-----
> From: Geert Uytterhoeven <geert@linux-m68k.org>
> Sent: 26 November 2020 13:41
> To: Prabhakar <prabhakar.csengg@gmail.com>; Magnus Damm <magnus.damm@gmail.com>; Rob Herring
> <robh+dt@kernel.org>
> Cc: Biju Das <biju.das.jz@bp.renesas.com>; linux-renesas-soc@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Prabhakar Mahadev Lad <prabhakar.mahadev-
> lad.rj@bp.renesas.com>; Geert Uytterhoeven <geert@linux-m68k.org>
> Subject: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
> 
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> v4:
>   - Describe a single camera in the .dtsi file,
>   - Include the .dtsi multiple times,
> 
>  .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    | 151 +++++++++---------
>  .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi |  30 ++++
>  2 files changed, 103 insertions(+), 78 deletions(-)
>  create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> 
That looks much cleaner thank you.

Cheers,
Prabhakar

> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-
> dbcm-ca.dts
> index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> @@ -91,67 +91,12 @@ &hscif0 {
>  	status = "okay";
>  };
> 
> -&i2c0 {
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam1>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_0: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin0ep>;
> -			};
> -		};
> -	};
> -};
> -
>  &i2c1 {
>  	pinctrl-0 = <&i2c1_pins>;
>  	pinctrl-names = "default";
> 
>  	status = "okay";
>  	clock-frequency = <400000>;
> -
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam2>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_1: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin1ep>;
> -			};
> -		};
> -	};
> -};
> -
> -&i2c2 {
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam3>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_2: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin2ep>;
> -			};
> -		};
> -	};
>  };
> 
>  &i2c3 {
> @@ -160,23 +105,6 @@ &i2c3 {
> 
>  	status = "okay";
>  	clock-frequency = <400000>;
> -
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam4>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_3: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin3ep>;
> -			};
> -		};
> -	};
>  };
> 
>  &pfc {
> @@ -267,6 +195,21 @@ &scifb1 {
>  	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
>  };
> 
> +/*
> + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
> + *
> + * Uncomment the #include statements to change configuration
> + */
> +
> +/* 8bit CMOS Camera 1 (J13) */
> +#define CAM_PARENT_I2C		i2c0
> +#define MCLK_CAM		mclk_cam1
> +#define CAM_EP			cam0ep
> +#define VIN_EP			vin0ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin0 {
>  	/*
>  	 * Set SW2 switch on the SOM to 'ON'
> @@ -278,13 +221,28 @@ &vin0 {
> 
>  	port {
>  		vin0ep: endpoint {
> -			remote-endpoint = <&ov5640_0>;
> +			remote-endpoint = <&cam0ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 2 (J14) */
> +#define CAM_PARENT_I2C		i2c1
> +#define MCLK_CAM		mclk_cam2
> +#define CAM_EP			cam1ep
> +#define VIN_EP			vin1ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin1 {
>  	/* Set SW1 switch on the SOM to 'ON' */
>  	status = "okay";
> @@ -293,13 +251,29 @@ &vin1 {
> 
>  	port {
>  		vin1ep: endpoint {
> -			remote-endpoint = <&ov5640_1>;
> +			remote-endpoint = <&cam1ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> 
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 3 (J12) */
> +#define CAM_PARENT_I2C		i2c2
> +#define MCLK_CAM		mclk_cam3
> +#define CAM_EP			cam2ep
> +#define VIN_EP			vin2ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin2 {
>  	status = "okay";
>  	pinctrl-0 = <&vin2_pins>;
> @@ -307,14 +281,29 @@ &vin2 {
> 
>  	port {
>  		vin2ep: endpoint {
> -			remote-endpoint = <&ov5640_2>;
> +			remote-endpoint = <&cam2ep>;
>  			bus-width = <8>;
>  			data-shift = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 4 (J11) */
> +#define CAM_PARENT_I2C		i2c3
> +#define MCLK_CAM		mclk_cam4
> +#define CAM_EP			cam3ep
> +#define VIN_EP			vin3ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin3 {
>  	status = "okay";
>  	pinctrl-0 = <&vin3_pins>;
> @@ -322,9 +311,15 @@ &vin3 {
> 
>  	port {
>  		vin3ep: endpoint {
> -			remote-endpoint = <&ov5640_3>;
> +			remote-endpoint = <&cam3ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-
> iwg21d-q7-dbcm-ov5640-single.dtsi
> new file mode 100644
> index 0000000000000000..408016620f5b1a04
> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This include file ties a VIN interface with a single ov5640 sensor on
> + * the iWave-RZ/G1H Qseven board development platform connected with the
> + * camera daughter board.
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +#define CAM_ENABLED	1
> +
> +&CAM_PARENT_I2C {
> +	ov5640@3c {
> +		compatible = "ovti,ov5640";
> +		reg = <0x3c>;
> +		clocks = <&MCLK_CAM>;
> +		clock-names = "xclk";
> +		status = "okay";
> +
> +		port {
> +			CAM_EP: endpoint {
> +				bus-width = <8>;
> +				data-shift = <2>;
> +				bus-type = <6>;
> +				pclk-sample = <1>;
> +				remote-endpoint = <&VIN_EP>;
> +			};
> +		};
> +	};
> +};
> --
> 2.25.1

Re: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes

[Geert Uytterhoeven]

On Thu, Nov 26, 2020 at 3:20 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Oops, obviously this should have been geert+renesas@glider.be.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v4 1/2] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes

[Jacopo Mondi]

Hi Geert,

On Thu, Nov 26, 2020 at 02:40:30PM +0100, Geert Uytterhoeven wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> v4:
>   - Describe a single camera in the .dtsi file,
>   - Include the .dtsi multiple times,
>
>  .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts    | 151 +++++++++---------
>  .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi |  30 ++++
>  2 files changed, 103 insertions(+), 78 deletions(-)
>  create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
>
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> @@ -91,67 +91,12 @@ &hscif0 {
>  	status = "okay";
>  };
>
> -&i2c0 {
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam1>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_0: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin0ep>;
> -			};
> -		};
> -	};
> -};
> -
>  &i2c1 {
>  	pinctrl-0 = <&i2c1_pins>;
>  	pinctrl-names = "default";
>
>  	status = "okay";
>  	clock-frequency = <400000>;

i2c1 and i2c3 are here unconditionally enabled, while i2c0 and i2c2
seem to be already enabled and configured already in the included
.dtsi

Wouldn't it be more approriate to enable and configure i2c1 and i2c3
in the r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi only if a camera
is there connected ?

> -
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam2>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_1: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin1ep>;
> -			};
> -		};
> -	};
> -};
> -
> -&i2c2 {
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam3>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_2: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin2ep>;
> -			};
> -		};
> -	};
>  };
>
>  &i2c3 {
> @@ -160,23 +105,6 @@ &i2c3 {
>
>  	status = "okay";
>  	clock-frequency = <400000>;
> -
> -	ov5640@3c {
> -		compatible = "ovti,ov5640";
> -		reg = <0x3c>;
> -		clocks = <&mclk_cam4>;
> -		clock-names = "xclk";
> -
> -		port {
> -			ov5640_3: endpoint {
> -				bus-width = <8>;
> -				data-shift = <2>;
> -				bus-type = <6>;
> -				pclk-sample = <1>;
> -				remote-endpoint = <&vin3ep>;
> -			};
> -		};
> -	};
>  };
>
>  &pfc {
> @@ -267,6 +195,21 @@ &scifb1 {
>  	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
>  };
>
> +/*
> + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
> + *
> + * Uncomment the #include statements to change configuration
> + */
> +
> +/* 8bit CMOS Camera 1 (J13) */
> +#define CAM_PARENT_I2C		i2c0
> +#define MCLK_CAM		mclk_cam1
> +#define CAM_EP			cam0ep
> +#define VIN_EP			vin0ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin0 {
>  	/*
>  	 * Set SW2 switch on the SOM to 'ON'
> @@ -278,13 +221,28 @@ &vin0 {
>
>  	port {
>  		vin0ep: endpoint {
> -			remote-endpoint = <&ov5640_0>;
> +			remote-endpoint = <&cam0ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 2 (J14) */
> +#define CAM_PARENT_I2C		i2c1
> +#define MCLK_CAM		mclk_cam2
> +#define CAM_EP			cam1ep
> +#define VIN_EP			vin1ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin1 {
>  	/* Set SW1 switch on the SOM to 'ON' */
>  	status = "okay";
> @@ -293,13 +251,29 @@ &vin1 {
>
>  	port {
>  		vin1ep: endpoint {
> -			remote-endpoint = <&ov5640_1>;
> +			remote-endpoint = <&cam1ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
>
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 3 (J12) */
> +#define CAM_PARENT_I2C		i2c2
> +#define MCLK_CAM		mclk_cam3
> +#define CAM_EP			cam2ep
> +#define VIN_EP			vin2ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin2 {
>  	status = "okay";
>  	pinctrl-0 = <&vin2_pins>;
> @@ -307,14 +281,29 @@ &vin2 {
>
>  	port {
>  		vin2ep: endpoint {
> -			remote-endpoint = <&ov5640_2>;
> +			remote-endpoint = <&cam2ep>;
>  			bus-width = <8>;
>  			data-shift = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 4 (J11) */
> +#define CAM_PARENT_I2C		i2c3
> +#define MCLK_CAM		mclk_cam4
> +#define CAM_EP			cam3ep
> +#define VIN_EP			vin3ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
>  &vin3 {
>  	status = "okay";
>  	pinctrl-0 = <&vin3_pins>;
> @@ -322,9 +311,15 @@ &vin3 {
>
>  	port {
>  		vin3ep: endpoint {
> -			remote-endpoint = <&ov5640_3>;
> +			remote-endpoint = <&cam3ep>;
>  			bus-width = <8>;
>  			bus-type = <6>;
>  		};
>  	};
>  };
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> new file mode 100644
> index 0000000000000000..408016620f5b1a04
> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This include file ties a VIN interface with a single ov5640 sensor on
> + * the iWave-RZ/G1H Qseven board development platform connected with the
> + * camera daughter board.
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +#define CAM_ENABLED	1
> +
> +&CAM_PARENT_I2C {
> +	ov5640@3c {
> +		compatible = "ovti,ov5640";
> +		reg = <0x3c>;
> +		clocks = <&MCLK_CAM>;
> +		clock-names = "xclk";
> +		status = "okay";
> +
> +		port {
> +			CAM_EP: endpoint {
> +				bus-width = <8>;
> +				data-shift = <2>;
> +				bus-type = <6>;
> +				pclk-sample = <1>;
> +				remote-endpoint = <&VIN_EP>;
> +			};
> +		};
> +	};
> +};
> --
> 2.25.1
>