[PATCH v5 0/4] drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs

[PATCH v5 0/4] drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs

[Gabriel Somlo]

This series expands on commit 22447a99c97e ("drivers/soc/litex: add LiteX
SoC Controller driver"), adding support for handling both 8- and 32-bit
LiteX CSR (MMIO) subregisters, on both 32- and 64-bit CPUs.

Notes v5:
	- added patch (4/4) taking 'litex_[set|get]_reg()' private
	- additional optimization of [_]litex_set_reg() in 3/4

Notes v4:
	- improved "eloquence" of some 3/3 commit blurb paragraphs
	- fixed instance of "disgusting" comment style :)
	- litex_[get|set]_reg() now using size_t for 'reg_size' argument
	- slightly tighter shift calculation in litex_set_reg()

Notes v3:
	- split into smaller, more self-explanatory patches
	- more detailed commit blurb for "main payload" (3/3) patch
	- eliminate compiler warning on 32-bit architectures

Notes v2:
	- fix typo (s/u32/u64/) in litex_read64().

Notes v1:
	- LITEX_SUBREG_SIZE now provided by Kconfig.
	- it's not LITEX_REG_SIZE, but rather LITEX_SUBREG_ALIGN!
	- move litex_[get|set]_reg() to include/linux/litex.h and mark
	  them as "static inline";
	- redo litex_[read|write][8|16|32|64]() using litex_[get|set]_reg()
	  (compiler should produce code as efficient as hardcoded shifts,
	   but also automatically matching LITEX_SUBREG_SIZE).

Gabriel Somlo (4):
  drivers/soc/litex: move generic accessors to litex.h
  drivers/soc/litex: separate MMIO from subregister offset calculation
  drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
  drivers/soc/litex: make 'litex_[set|get]_reg()' methods private

 drivers/soc/litex/Kconfig          |  14 ++-
 drivers/soc/litex/litex_soc_ctrl.c |  76 +-------------
 include/linux/litex.h              | 154 +++++++++++++++++++----------
 3 files changed, 119 insertions(+), 125 deletions(-)

-- 
2.26.2

[PATCH v5 1/4] drivers/soc/litex: move generic accessors to litex.h

[Gabriel Somlo]

Move generic LiteX CSR (MMIO) register accessors to litex.h and
declare them as "static inline", in preparation for supporting
32-bit CSR subregisters and 64-bit CPUs.

NOTE: this is a non-functional change.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---
 drivers/soc/litex/litex_soc_ctrl.c | 73 -----------------------------
 include/linux/litex.h              | 74 ++++++++++++++++++++++++++++--
 2 files changed, 69 insertions(+), 78 deletions(-)

diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
index 1217cafdfd4d..65977526d68e 100644
--- a/drivers/soc/litex/litex_soc_ctrl.c
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -16,79 +16,6 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 
-/*
- * LiteX SoC Generator, depending on the configuration, can split a single
- * logical CSR (Control&Status Register) into a series of consecutive physical
- * registers.
- *
- * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
- * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
- * 32-bit physical registers, each one containing one byte of meaningful data.
- *
- * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
- *
- * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
- * of writing to/reading from the LiteX CSR in a single place that can be
- * then reused by all LiteX drivers.
- */
-
-/**
- * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- * @val: Value to be written to the CSR
- *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function splits a single possibly multi-byte write into a series of
- * single-byte writes with a proper offset.
- */
-void litex_set_reg(void __iomem *reg, unsigned long reg_size,
-		    unsigned long val)
-{
-	unsigned long shifted_data, shift, i;
-
-	for (i = 0; i < reg_size; ++i) {
-		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
-		shifted_data = val >> shift;
-
-		WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
-	}
-}
-EXPORT_SYMBOL_GPL(litex_set_reg);
-
-/**
- * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- *
- * Return: Value read from the CSR
- *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function generates a series of single-byte reads with a proper offset
- * and joins their results into a single multi-byte value.
- */
-unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_size)
-{
-	unsigned long shifted_data, shift, i;
-	unsigned long result = 0;
-
-	for (i = 0; i < reg_size; ++i) {
-		shifted_data = READ_LITEX_SUBREGISTER(reg, i);
-
-		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
-		result |= (shifted_data << shift);
-	}
-
-	return result;
-}
-EXPORT_SYMBOL_GPL(litex_get_reg);
-
 #define SCRATCH_REG_OFF         0x04
 #define SCRATCH_REG_VALUE       0x12345678
 #define SCRATCH_TEST_VALUE      0xdeadbeef
diff --git a/include/linux/litex.h b/include/linux/litex.h
index 40f5be503593..67c1a18a7425 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -3,9 +3,6 @@
  * Common LiteX header providing
  * helper functions for accessing CSRs.
  *
- * Implementation of the functions is provided by
- * the LiteX SoC Controller driver.
- *
  * Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
  */
 
@@ -33,9 +30,76 @@
 #define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
 	le32_to_cpu((__le32 __force)readl(base_offset + (LITEX_REG_SIZE * subreg_id)))
 
-void litex_set_reg(void __iomem *reg, unsigned long reg_sz, unsigned long val);
+/*
+ * LiteX SoC Generator, depending on the configuration, can split a single
+ * logical CSR (Control&Status Register) into a series of consecutive physical
+ * registers.
+ *
+ * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
+ * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
+ * 32-bit physical registers, each one containing one byte of meaningful data.
+ *
+ * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
+ *
+ * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
+ * of writing to/reading from the LiteX CSR in a single place that can be
+ * then reused by all LiteX drivers.
+ */
+
+/**
+ * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ * @val: Value to be written to the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function splits a single possibly multi-byte write into a series of
+ * single-byte writes with a proper offset.
+ */
+static inline void litex_set_reg(void __iomem *reg, ulong reg_size, ulong val)
+{
+	ulong shifted_data, shift, i;
+
+	for (i = 0; i < reg_size; ++i) {
+		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+		shifted_data = val >> shift;
+
+		WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
+	}
+}
+
+/**
+ * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ *
+ * Return: Value read from the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function generates a series of single-byte reads with a proper offset
+ * and joins their results into a single multi-byte value.
+ */
+static inline ulong litex_get_reg(void __iomem *reg, ulong reg_size)
+{
+	ulong shifted_data, shift, i;
+	ulong result = 0;
+
+	for (i = 0; i < reg_size; ++i) {
+		shifted_data = READ_LITEX_SUBREGISTER(reg, i);
+
+		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+		result |= (shifted_data << shift);
+	}
+
+	return result;
+}
 
-unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_sz);
 
 static inline void litex_write8(void __iomem *reg, u8 val)
 {
-- 
2.26.2

[PATCH v5 2/4] drivers/soc/litex: separate MMIO from subregister offset calculation

[Gabriel Somlo]

Separate MMIO (read/write) access into _[read|write]_litex_subregister()
static inline functions, leaving existing "READ|WRITE" macros to handle
calculation of the subregister offset only.

NOTE: this is a non-functional change.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---
 include/linux/litex.h | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/litex.h b/include/linux/litex.h
index 67c1a18a7425..918bab45243c 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -24,11 +24,23 @@
 #define LITEX_SUBREG_SIZE	0x1
 #define LITEX_SUBREG_SIZE_BIT	 (LITEX_SUBREG_SIZE * 8)
 
+static inline void _write_litex_subregister(u32 val, void __iomem *addr)
+{
+	writel((u32 __force)cpu_to_le32(val), addr);
+}
+
+static inline u32 _read_litex_subregister(void __iomem *addr)
+{
+	return le32_to_cpu((__le32 __force)readl(addr));
+}
+
 #define WRITE_LITEX_SUBREGISTER(val, base_offset, subreg_id) \
-	writel((u32 __force)cpu_to_le32(val), base_offset + (LITEX_REG_SIZE * subreg_id))
+	_write_litex_subregister(val, (base_offset) + \
+					LITEX_REG_SIZE * (subreg_id))
 
 #define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
-	le32_to_cpu((__le32 __force)readl(base_offset + (LITEX_REG_SIZE * subreg_id)))
+	_read_litex_subregister((base_offset) + \
+					LITEX_REG_SIZE * (subreg_id))
 
 /*
  * LiteX SoC Generator, depending on the configuration, can split a single
-- 
2.26.2

[PATCH v5 3/4] drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs

[Gabriel Somlo]

Upstream LiteX now defaults to using 32-bit CSR subregisters
(see https://github.com/enjoy-digital/litex/commit/a2b71fde).

This patch expands on commit 22447a99c97e ("drivers/soc/litex: add
LiteX SoC Controller driver"), adding support for handling both 8-
and 32-bit LiteX CSR (MMIO) subregisters, as determined by the
LITEX_SUBREG_SIZE Kconfig option.

NOTE that while LITEX_SUBREG_SIZE could theoretically be a device
tree property, defining it as a compile-time constant allows for
much better optimization of the resulting code. This is further
supported by the low expected usefulness of deploying the same
kernel across LiteX SoCs built with different CSR-Bus data widths.

The constant LITEX_REG_SIZE is renamed to the more descriptive
LITEX_SUBREG_ALIGN (LiteX CSR subregisters are located at 32-bit
aligned MMIO addresses).

Finally, the litex_[read|write][8|16|32|64]() accessors are
redefined in terms of litex_[get|set]_reg(), which, after compiler
optimization, will result in code as efficient as hardcoded shifts,
but with the added benefit of automatically matching the appropriate
LITEX_SUBREG_SIZE.

NOTE that litex_[get|set]_reg() nominally operate on 64-bit data,
but that will also be optimized by the compiler in situations where
narrower data is used from a call site.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---

Changes since v4:
	- tighter, more optimized implementation of 'litex_set_reg()'

Changes since v3:
	- improved legibility, fixed typos in commit blurb
	- fixed instance of "disgusting" commit style :)
	- litex_[get|set]_reg() now using size_t for 'reg_size' argument
	- slightly tighter shift calculation in litex_set_reg()

Changes since v2:
	- more detailed comomit blurb
	- eliminate compiler warning caused by shift in litex_set_reg()

Changes since v1:
	- fix typo (s/u32/u64/) in litex_read64().

 drivers/soc/litex/Kconfig          |  12 +++
 drivers/soc/litex/litex_soc_ctrl.c |   3 +-
 include/linux/litex.h              | 139 ++++++++++++-----------------
 3 files changed, 70 insertions(+), 84 deletions(-)

diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
index 7c6b009b6f6c..973f8d2fe1a7 100644
--- a/drivers/soc/litex/Kconfig
+++ b/drivers/soc/litex/Kconfig
@@ -16,4 +16,16 @@ config LITEX_SOC_CONTROLLER
 	  All drivers that use functions from litex.h must depend on
 	  LITEX.
 
+config LITEX_SUBREG_SIZE
+	int "Size of a LiteX CSR subregister, in bytes"
+	depends on LITEX
+	range 1 4
+	default 4
+	help
+	LiteX MMIO registers (referred to as Configuration and Status
+	registers, or CSRs) are spread across adjacent 8- or 32-bit
+	subregisters, located at 32-bit aligned MMIO addresses. Use
+	this to select the appropriate size (1 or 4 bytes) matching
+	your particular LiteX build.
+
 endmenu
diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
index 65977526d68e..da17ba56b795 100644
--- a/drivers/soc/litex/litex_soc_ctrl.c
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -58,7 +58,8 @@ static int litex_check_csr_access(void __iomem *reg_addr)
 	/* restore original value of the SCRATCH register */
 	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE);
 
-	pr_info("LiteX SoC Controller driver initialized");
+	pr_info("LiteX SoC Controller driver initialized: subreg:%d, align:%d",
+		LITEX_SUBREG_SIZE, LITEX_SUBREG_ALIGN);
 
 	return 0;
 }
diff --git a/include/linux/litex.h b/include/linux/litex.h
index 918bab45243c..3456d527f644 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -10,20 +10,19 @@
 #define _LINUX_LITEX_H
 
 #include <linux/io.h>
-#include <linux/types.h>
-#include <linux/compiler_types.h>
 
-/*
- * The parameters below are true for LiteX SoCs configured for 8-bit CSR Bus,
- * 32-bit aligned.
- *
- * Supporting other configurations will require extending the logic in this
- * header and in the LiteX SoC controller driver.
- */
-#define LITEX_REG_SIZE	  0x4
-#define LITEX_SUBREG_SIZE	0x1
+/* LiteX SoCs support 8- or 32-bit CSR Bus data width (i.e., subreg. size) */
+#if defined(CONFIG_LITEX_SUBREG_SIZE) && \
+	(CONFIG_LITEX_SUBREG_SIZE == 1 || CONFIG_LITEX_SUBREG_SIZE == 4)
+#define LITEX_SUBREG_SIZE      CONFIG_LITEX_SUBREG_SIZE
+#else
+#error LiteX subregister size (LITEX_SUBREG_SIZE) must be 4 or 1!
+#endif
 #define LITEX_SUBREG_SIZE_BIT	 (LITEX_SUBREG_SIZE * 8)
 
+/* LiteX subregisters of any width are always aligned on a 4-byte boundary */
+#define LITEX_SUBREG_ALIGN	  0x4
+
 static inline void _write_litex_subregister(u32 val, void __iomem *addr)
 {
 	writel((u32 __force)cpu_to_le32(val), addr);
@@ -34,25 +33,32 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
 	return le32_to_cpu((__le32 __force)readl(addr));
 }
 
-#define WRITE_LITEX_SUBREGISTER(val, base_offset, subreg_id) \
-	_write_litex_subregister(val, (base_offset) + \
-					LITEX_REG_SIZE * (subreg_id))
-
-#define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
-	_read_litex_subregister((base_offset) + \
-					LITEX_REG_SIZE * (subreg_id))
-
 /*
  * LiteX SoC Generator, depending on the configuration, can split a single
  * logical CSR (Control&Status Register) into a series of consecutive physical
  * registers.
  *
- * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
- * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
- * 32-bit physical registers, each one containing one byte of meaningful data.
+ * For example, in the configuration with 8-bit CSR Bus, a 32-bit aligned,
+ * 32-bit wide logical CSR will be laid out as four 32-bit physical
+ * subregisters, each one containing one byte of meaningful data.
  *
  * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
- *
+ */
+
+/* number of LiteX subregisters needed to store a register of given reg_size */
+#define _litex_num_subregs(reg_size) \
+	(((reg_size) - 1) / LITEX_SUBREG_SIZE + 1)
+
+/*
+ * since the number of 4-byte aligned subregisters required to store a single
+ * LiteX CSR (MMIO) register varies with LITEX_SUBREG_SIZE, the offset of the
+ * next adjacent LiteX CSR register w.r.t. the offset of the current one also
+ * depends on how many subregisters the latter is spread across
+ */
+#define _next_reg_off(off, size) \
+	((off) + _litex_num_subregs(size) * LITEX_SUBREG_ALIGN)
+
+/*
  * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
  * of writing to/reading from the LiteX CSR in a single place that can be
  * then reused by all LiteX drivers.
@@ -64,22 +70,17 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
  * @reg_size: The width of the CSR expressed in the number of bytes
  * @val: Value to be written to the CSR
  *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function splits a single possibly multi-byte write into a series of
- * single-byte writes with a proper offset.
+ * This function splits a single (possibly multi-byte) LiteX CSR write into
+ * a series of subregister writes with a proper offset.
  */
-static inline void litex_set_reg(void __iomem *reg, ulong reg_size, ulong val)
+static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
 {
-	ulong shifted_data, shift, i;
+	u8 shift = _litex_num_subregs(reg_size) * LITEX_SUBREG_SIZE_BIT;
 
-	for (i = 0; i < reg_size; ++i) {
-		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
-		shifted_data = val >> shift;
-
-		WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
+	while (shift > 0) {
+		shift -= LITEX_SUBREG_SIZE_BIT;
+		_write_litex_subregister(val >> shift, reg);
+		reg += LITEX_SUBREG_ALIGN;
 	}
 }
 
@@ -90,89 +91,61 @@ static inline void litex_set_reg(void __iomem *reg, ulong reg_size, ulong val)
  *
  * Return: Value read from the CSR
  *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function generates a series of single-byte reads with a proper offset
- * and joins their results into a single multi-byte value.
+ * This function generates a series of subregister reads with a proper offset
+ * and joins their results into a single (possibly multi-byte) LiteX CSR value.
  */
-static inline ulong litex_get_reg(void __iomem *reg, ulong reg_size)
+static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
 {
-	ulong shifted_data, shift, i;
-	ulong result = 0;
+	u64 r;
+	u8 i;
 
-	for (i = 0; i < reg_size; ++i) {
-		shifted_data = READ_LITEX_SUBREGISTER(reg, i);
-
-		shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
-		result |= (shifted_data << shift);
+	r = _read_litex_subregister(reg);
+	for (i = 1; i < _litex_num_subregs(reg_size); i++) {
+		r <<= LITEX_SUBREG_SIZE_BIT;
+		reg += LITEX_SUBREG_ALIGN;
+		r |= _read_litex_subregister(reg);
 	}
-
-	return result;
+	return r;
 }
 
-
 static inline void litex_write8(void __iomem *reg, u8 val)
 {
-	WRITE_LITEX_SUBREGISTER(val, reg, 0);
+	litex_set_reg(reg, sizeof(u8), val);
 }
 
 static inline void litex_write16(void __iomem *reg, u16 val)
 {
-	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 0);
-	WRITE_LITEX_SUBREGISTER(val, reg, 1);
+	litex_set_reg(reg, sizeof(u16), val);
 }
 
 static inline void litex_write32(void __iomem *reg, u32 val)
 {
-	WRITE_LITEX_SUBREGISTER(val >> 24, reg, 0);
-	WRITE_LITEX_SUBREGISTER(val >> 16, reg, 1);
-	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 2);
-	WRITE_LITEX_SUBREGISTER(val, reg, 3);
+	litex_set_reg(reg, sizeof(u32), val);
 }
 
 static inline void litex_write64(void __iomem *reg, u64 val)
 {
-	WRITE_LITEX_SUBREGISTER(val >> 56, reg, 0);
-	WRITE_LITEX_SUBREGISTER(val >> 48, reg, 1);
-	WRITE_LITEX_SUBREGISTER(val >> 40, reg, 2);
-	WRITE_LITEX_SUBREGISTER(val >> 32, reg, 3);
-	WRITE_LITEX_SUBREGISTER(val >> 24, reg, 4);
-	WRITE_LITEX_SUBREGISTER(val >> 16, reg, 5);
-	WRITE_LITEX_SUBREGISTER(val >> 8, reg, 6);
-	WRITE_LITEX_SUBREGISTER(val, reg, 7);
+	litex_set_reg(reg, sizeof(u64), val);
 }
 
 static inline u8 litex_read8(void __iomem *reg)
 {
-	return READ_LITEX_SUBREGISTER(reg, 0);
+	return litex_get_reg(reg, sizeof(u8));
 }
 
 static inline u16 litex_read16(void __iomem *reg)
 {
-	return (READ_LITEX_SUBREGISTER(reg, 0) << 8)
-		| (READ_LITEX_SUBREGISTER(reg, 1));
+	return litex_get_reg(reg, sizeof(u16));
 }
 
 static inline u32 litex_read32(void __iomem *reg)
 {
-	return (READ_LITEX_SUBREGISTER(reg, 0) << 24)
-		| (READ_LITEX_SUBREGISTER(reg, 1) << 16)
-		| (READ_LITEX_SUBREGISTER(reg, 2) << 8)
-		| (READ_LITEX_SUBREGISTER(reg, 3));
+	return litex_get_reg(reg, sizeof(u32));
 }
 
 static inline u64 litex_read64(void __iomem *reg)
 {
-	return ((u64)READ_LITEX_SUBREGISTER(reg, 0) << 56)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 1) << 48)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 2) << 40)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 3) << 32)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 4) << 24)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 5) << 16)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 6) << 8)
-		| ((u64)READ_LITEX_SUBREGISTER(reg, 7));
+	return litex_get_reg(reg, sizeof(u64));
 }
 
 #endif /* _LINUX_LITEX_H */
-- 
2.26.2

[PATCH v5 4/4] drivers/soc/litex: make 'litex_[set|get]_reg()' methods private

[Gabriel Somlo]

The 'litex_[set|get]_reg()' methods use the 'reg_size' parameter to
specify the width of the LiteX CSR (MMIO) register being accessed.

Since 'u64' is the widest data being supported, the value of 'reg_size'
MUST be between 1 and sizeof(u64), which SHOULD be checked at runtime
if these methods are publicly available for use by other LiteX device
drivers.

At the same time, none of the existing (or foreseeable) LiteX device
drivers have a need to access registers whose size is unknown during
compilation. As such, all LiteX device drivers should use fixed-width
accessor methods such as 'litex_[write|read][8|16|32|64]()'.

This patch renames 'litex_[set|get]_reg()' to '_litex_[set|get]_reg()',
indicating that they should NOT be directly called from outside of
the 'include/linux/litex.h' header file.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---
 drivers/soc/litex/Kconfig |  2 +-
 include/linux/litex.h     | 35 ++++++++++++++++++++---------------
 2 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
index 973f8d2fe1a7..b9b3d51ea7df 100644
--- a/drivers/soc/litex/Kconfig
+++ b/drivers/soc/litex/Kconfig
@@ -11,7 +11,7 @@ config LITEX_SOC_CONTROLLER
 	select LITEX
 	help
 	  This option enables the SoC Controller Driver which verifies
-	  LiteX CSR access and provides common litex_get_reg/litex_set_reg
+	  LiteX CSR access and provides common litex_[read|write]*
 	  accessors.
 	  All drivers that use functions from litex.h must depend on
 	  LITEX.
diff --git a/include/linux/litex.h b/include/linux/litex.h
index 3456d527f644..14748fa86a99 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -59,21 +59,25 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
 	((off) + _litex_num_subregs(size) * LITEX_SUBREG_ALIGN)
 
 /*
- * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
- * of writing to/reading from the LiteX CSR in a single place that can be
- * then reused by all LiteX drivers.
+ * The purpose of `_litex_[set|get]_reg()` is to implement the logic of
+ * writing to/reading from the LiteX CSR in a single place that can be then
+ * reused by all LiteX drivers via the `litex_[write|read][8|16|32|64]()`
+ * accessors for the appropriate data width.
+ * NOTE: direct use of `_litex_[set|get]_reg()` by LiteX drivers is strongly
+ * discouraged, as they perform no error checking on the requested data width!
  */
 
 /**
- * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
+ * _litex_set_reg() - Writes a value to the LiteX CSR (Control&Status Register)
  * @reg: Address of the CSR
  * @reg_size: The width of the CSR expressed in the number of bytes
  * @val: Value to be written to the CSR
  *
  * This function splits a single (possibly multi-byte) LiteX CSR write into
  * a series of subregister writes with a proper offset.
+ * NOTE: caller is responsible for ensuring (0 < reg_size < sizeof(u64)).
  */
-static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
+static inline void _litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
 {
 	u8 shift = _litex_num_subregs(reg_size) * LITEX_SUBREG_SIZE_BIT;
 
@@ -85,7 +89,7 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
 }
 
 /**
- * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
+ * _litex_get_reg() - Reads a value of the LiteX CSR (Control&Status Register)
  * @reg: Address of the CSR
  * @reg_size: The width of the CSR expressed in the number of bytes
  *
@@ -93,8 +97,9 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
  *
  * This function generates a series of subregister reads with a proper offset
  * and joins their results into a single (possibly multi-byte) LiteX CSR value.
+ * NOTE: caller is responsible for ensuring (0 < reg_size < sizeof(u64)).
  */
-static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
+static inline u64 _litex_get_reg(void __iomem *reg, size_t reg_size)
 {
 	u64 r;
 	u8 i;
@@ -110,42 +115,42 @@ static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
 
 static inline void litex_write8(void __iomem *reg, u8 val)
 {
-	litex_set_reg(reg, sizeof(u8), val);
+	_litex_set_reg(reg, sizeof(u8), val);
 }
 
 static inline void litex_write16(void __iomem *reg, u16 val)
 {
-	litex_set_reg(reg, sizeof(u16), val);
+	_litex_set_reg(reg, sizeof(u16), val);
 }
 
 static inline void litex_write32(void __iomem *reg, u32 val)
 {
-	litex_set_reg(reg, sizeof(u32), val);
+	_litex_set_reg(reg, sizeof(u32), val);
 }
 
 static inline void litex_write64(void __iomem *reg, u64 val)
 {
-	litex_set_reg(reg, sizeof(u64), val);
+	_litex_set_reg(reg, sizeof(u64), val);
 }
 
 static inline u8 litex_read8(void __iomem *reg)
 {
-	return litex_get_reg(reg, sizeof(u8));
+	return _litex_get_reg(reg, sizeof(u8));
 }
 
 static inline u16 litex_read16(void __iomem *reg)
 {
-	return litex_get_reg(reg, sizeof(u16));
+	return _litex_get_reg(reg, sizeof(u16));
 }
 
 static inline u32 litex_read32(void __iomem *reg)
 {
-	return litex_get_reg(reg, sizeof(u32));
+	return _litex_get_reg(reg, sizeof(u32));
 }
 
 static inline u64 litex_read64(void __iomem *reg)
 {
-	return litex_get_reg(reg, sizeof(u64));
+	return _litex_get_reg(reg, sizeof(u64));
 }
 
 #endif /* _LINUX_LITEX_H */
-- 
2.26.2

Re: [PATCH v5 4/4] drivers/soc/litex: make 'litex_[set|get]_reg()' methods private

[Gabriel L. Somlo]

On Sun, Dec 27, 2020 at 11:13:20AM -0500, Gabriel Somlo wrote:
> The 'litex_[set|get]_reg()' methods use the 'reg_size' parameter to
> specify the width of the LiteX CSR (MMIO) register being accessed.
> 
> Since 'u64' is the widest data being supported, the value of 'reg_size'
> MUST be between 1 and sizeof(u64), which SHOULD be checked at runtime
> if these methods are publicly available for use by other LiteX device
> drivers.
> 
> At the same time, none of the existing (or foreseeable) LiteX device
> drivers have a need to access registers whose size is unknown during
> compilation. As such, all LiteX device drivers should use fixed-width
> accessor methods such as 'litex_[write|read][8|16|32|64]()'.
> 
> This patch renames 'litex_[set|get]_reg()' to '_litex_[set|get]_reg()',
> indicating that they should NOT be directly called from outside of
> the 'include/linux/litex.h' header file.
> 
> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
> ---
>  drivers/soc/litex/Kconfig |  2 +-
>  include/linux/litex.h     | 35 ++++++++++++++++++++---------------
>  2 files changed, 21 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/soc/litex/Kconfig b/drivers/soc/litex/Kconfig
> index 973f8d2fe1a7..b9b3d51ea7df 100644
> --- a/drivers/soc/litex/Kconfig
> +++ b/drivers/soc/litex/Kconfig
> @@ -11,7 +11,7 @@ config LITEX_SOC_CONTROLLER
>  	select LITEX
>  	help
>  	  This option enables the SoC Controller Driver which verifies
> -	  LiteX CSR access and provides common litex_get_reg/litex_set_reg
> +	  LiteX CSR access and provides common litex_[read|write]*
>  	  accessors.
>  	  All drivers that use functions from litex.h must depend on
>  	  LITEX.
> diff --git a/include/linux/litex.h b/include/linux/litex.h
> index 3456d527f644..14748fa86a99 100644
> --- a/include/linux/litex.h
> +++ b/include/linux/litex.h
> @@ -59,21 +59,25 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
>  	((off) + _litex_num_subregs(size) * LITEX_SUBREG_ALIGN)
>  
>  /*
> - * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
> - * of writing to/reading from the LiteX CSR in a single place that can be
> - * then reused by all LiteX drivers.
> + * The purpose of `_litex_[set|get]_reg()` is to implement the logic of
> + * writing to/reading from the LiteX CSR in a single place that can be then
> + * reused by all LiteX drivers via the `litex_[write|read][8|16|32|64]()`
> + * accessors for the appropriate data width.
> + * NOTE: direct use of `_litex_[set|get]_reg()` by LiteX drivers is strongly
> + * discouraged, as they perform no error checking on the requested data width!
>   */
>  
>  /**
> - * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
> + * _litex_set_reg() - Writes a value to the LiteX CSR (Control&Status Register)
>   * @reg: Address of the CSR
>   * @reg_size: The width of the CSR expressed in the number of bytes
>   * @val: Value to be written to the CSR
>   *
>   * This function splits a single (possibly multi-byte) LiteX CSR write into
>   * a series of subregister writes with a proper offset.
> + * NOTE: caller is responsible for ensuring (0 < reg_size < sizeof(u64)).

This will be fixed in v6 to read "(0 < reg_size <= sizeof(u64))".

>   */
> -static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
> +static inline void _litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
>  {
>  	u8 shift = _litex_num_subregs(reg_size) * LITEX_SUBREG_SIZE_BIT;
>  
> @@ -85,7 +89,7 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
>  }
>  
>  /**
> - * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
> + * _litex_get_reg() - Reads a value of the LiteX CSR (Control&Status Register)
>   * @reg: Address of the CSR
>   * @reg_size: The width of the CSR expressed in the number of bytes
>   *
> @@ -93,8 +97,9 @@ static inline void litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
>   *
>   * This function generates a series of subregister reads with a proper offset
>   * and joins their results into a single (possibly multi-byte) LiteX CSR value.
> + * NOTE: caller is responsible for ensuring (0 < reg_size < sizeof(u64)).

Ditto.

Thanks,
--Gabriel

>   */
> -static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
> +static inline u64 _litex_get_reg(void __iomem *reg, size_t reg_size)
>  {
>  	u64 r;
>  	u8 i;
> @@ -110,42 +115,42 @@ static inline u64 litex_get_reg(void __iomem *reg, size_t reg_size)
>  
>  static inline void litex_write8(void __iomem *reg, u8 val)
>  {
> -	litex_set_reg(reg, sizeof(u8), val);
> +	_litex_set_reg(reg, sizeof(u8), val);
>  }
>  
>  static inline void litex_write16(void __iomem *reg, u16 val)
>  {
> -	litex_set_reg(reg, sizeof(u16), val);
> +	_litex_set_reg(reg, sizeof(u16), val);
>  }
>  
>  static inline void litex_write32(void __iomem *reg, u32 val)
>  {
> -	litex_set_reg(reg, sizeof(u32), val);
> +	_litex_set_reg(reg, sizeof(u32), val);
>  }
>  
>  static inline void litex_write64(void __iomem *reg, u64 val)
>  {
> -	litex_set_reg(reg, sizeof(u64), val);
> +	_litex_set_reg(reg, sizeof(u64), val);
>  }
>  
>  static inline u8 litex_read8(void __iomem *reg)
>  {
> -	return litex_get_reg(reg, sizeof(u8));
> +	return _litex_get_reg(reg, sizeof(u8));
>  }
>  
>  static inline u16 litex_read16(void __iomem *reg)
>  {
> -	return litex_get_reg(reg, sizeof(u16));
> +	return _litex_get_reg(reg, sizeof(u16));
>  }
>  
>  static inline u32 litex_read32(void __iomem *reg)
>  {
> -	return litex_get_reg(reg, sizeof(u32));
> +	return _litex_get_reg(reg, sizeof(u32));
>  }
>  
>  static inline u64 litex_read64(void __iomem *reg)
>  {
> -	return litex_get_reg(reg, sizeof(u64));
> +	return _litex_get_reg(reg, sizeof(u64));
>  }
>  
>  #endif /* _LINUX_LITEX_H */
> -- 
> 2.26.2
> 

Re: [PATCH v5 0/4] drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs

[Gabriel L. Somlo]

Ping :)

On Sun, Dec 27, 2020 at 11:13:16AM -0500, Gabriel Somlo wrote:
> This series expands on commit 22447a99c97e ("drivers/soc/litex: add LiteX
> SoC Controller driver"), adding support for handling both 8- and 32-bit
> LiteX CSR (MMIO) subregisters, on both 32- and 64-bit CPUs.
> 
> Notes v5:
> 	- added patch (4/4) taking 'litex_[set|get]_reg()' private
> 	- additional optimization of [_]litex_set_reg() in 3/4
> 
> Notes v4:
> 	- improved "eloquence" of some 3/3 commit blurb paragraphs
> 	- fixed instance of "disgusting" comment style :)
> 	- litex_[get|set]_reg() now using size_t for 'reg_size' argument
> 	- slightly tighter shift calculation in litex_set_reg()
> 
> Notes v3:
> 	- split into smaller, more self-explanatory patches
> 	- more detailed commit blurb for "main payload" (3/3) patch
> 	- eliminate compiler warning on 32-bit architectures
> 
> Notes v2:
> 	- fix typo (s/u32/u64/) in litex_read64().
> 
> Notes v1:
> 	- LITEX_SUBREG_SIZE now provided by Kconfig.
> 	- it's not LITEX_REG_SIZE, but rather LITEX_SUBREG_ALIGN!
> 	- move litex_[get|set]_reg() to include/linux/litex.h and mark
> 	  them as "static inline";
> 	- redo litex_[read|write][8|16|32|64]() using litex_[get|set]_reg()
> 	  (compiler should produce code as efficient as hardcoded shifts,
> 	   but also automatically matching LITEX_SUBREG_SIZE).
> 
> Gabriel Somlo (4):
>   drivers/soc/litex: move generic accessors to litex.h
>   drivers/soc/litex: separate MMIO from subregister offset calculation
>   drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
>   drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
> 
>  drivers/soc/litex/Kconfig          |  14 ++-
>  drivers/soc/litex/litex_soc_ctrl.c |  76 +-------------
>  include/linux/litex.h              | 154 +++++++++++++++++++----------
>  3 files changed, 119 insertions(+), 125 deletions(-)
> 
> -- 
> 2.26.2
>