* [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
@ 2020-12-09 22:09 Lukasz Majewski
2020-12-22 17:41 ` Lukasz Majewski
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Lukasz Majewski @ 2020-12-09 22:09 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Fabio Estevam
Cc: Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel, linux-kernel, Mans Rullgard,
Lukasz Majewski
From: Mans Rullgard <mans@mansr.com>
Add pinmux setting for USB1 overcurrent on pwm2 pad.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
Changes for v2:
- Add S-o-B
---
arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ usb1_pins_b: usb1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
usb0_id_pins_a: usb0id@0 {
reg = <0>;
fsl,pinmux-ids = <
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
2020-12-09 22:09 [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 Lukasz Majewski
@ 2020-12-22 17:41 ` Lukasz Majewski
2020-12-22 17:43 ` Fabio Estevam
2021-01-07 3:27 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Lukasz Majewski @ 2020-12-22 17:41 UTC (permalink / raw)
To: Rob Herring, Shawn Guo, Fabio Estevam
Cc: Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team,
devicetree, linux-arm-kernel, linux-kernel, Mans Rullgard
[-- Attachment #1: Type: text/plain, Size: 1297 bytes --]
Hi Shawn,
> From: Mans Rullgard <mans@mansr.com>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
Gentle ping on this patch.
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
> Changes for v2:
> - Add S-o-B
> ---
> arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi
> b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -948,6 +948,16 @@
> fsl,pull-up =
> <MXS_PULL_DISABLE>; };
>
> + usb1_pins_b: usb1@1 {
> + reg = <1>;
> + fsl,pinmux-ids = <
> +
> MX28_PAD_PWM2__USB1_OVERCURRENT
> + >;
> + fsl,drive-strength =
> <MXS_DRIVE_12mA>;
> + fsl,voltage =
> <MXS_VOLTAGE_HIGH>;
> + fsl,pull-up =
> <MXS_PULL_DISABLE>;
> + };
> +
> usb0_id_pins_a: usb0id@0 {
> reg = <0>;
> fsl,pinmux-ids = <
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
2020-12-09 22:09 [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 Lukasz Majewski
2020-12-22 17:41 ` Lukasz Majewski
@ 2020-12-22 17:43 ` Fabio Estevam
2021-01-07 3:27 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2020-12-22 17:43 UTC (permalink / raw)
To: Lukasz Majewski
Cc: Rob Herring, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel, Mans Rullgard
On Wed, Dec 9, 2020 at 7:10 PM Lukasz Majewski <lukma@denx.de> wrote:
>
> From: Mans Rullgard <mans@mansr.com>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2
2020-12-09 22:09 [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 Lukasz Majewski
2020-12-22 17:41 ` Lukasz Majewski
2020-12-22 17:43 ` Fabio Estevam
@ 2021-01-07 3:27 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2021-01-07 3:27 UTC (permalink / raw)
To: Lukasz Majewski
Cc: Rob Herring, Fabio Estevam, Sascha Hauer,
Pengutronix Kernel Team, NXP Linux Team, devicetree,
linux-arm-kernel, linux-kernel, Mans Rullgard
On Wed, Dec 09, 2020 at 11:09:03PM +0100, Lukasz Majewski wrote:
> From: Mans Rullgard <mans@mansr.com>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-07 3:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 22:09 [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 Lukasz Majewski
2020-12-22 17:41 ` Lukasz Majewski
2020-12-22 17:43 ` Fabio Estevam
2021-01-07 3:27 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).