* [PATCH v4 1/3] ARM: LPAE: Use phys_addr_t instead of unsigned long in outercache hooks
2021-01-13 9:39 [PATCH v4 0/3] ARM: Add support for Hisilicon Kunpeng L3 cache controller Zhen Lei
@ 2021-01-13 9:39 ` Zhen Lei
2021-01-13 9:39 ` [PATCH v4 2/3] dt-bindings: arm: hisilicon: Add binding for Kunpeng L3 cache controller Zhen Lei
2021-01-13 9:39 ` [PATCH v4 3/3] ARM: Add support for Hisilicon " Zhen Lei
2 siblings, 0 replies; 4+ messages in thread
From: Zhen Lei @ 2021-01-13 9:39 UTC (permalink / raw)
To: Russell King, Greg Kroah-Hartman, Will Deacon, Haojian Zhuang,
Arnd Bergmann, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Cc: Zhen Lei
The outercache of some Hisilicon SOCs support physical addresses wider
than 32-bits. The unsigned long datatype is not sufficient for mapping
physical addresses >= 4GB. The commit ad6b9c9d78b9 ("ARM: 6671/1: LPAE:
use phys_addr_t instead of unsigned long in outercache functions") has
already modified the outercache functions. But the parameters of the
outercache hooks are not changed. This patch use phys_addr_t instead of
unsigned long in outercache hooks: inv_range, clean_range, flush_range.
To ensure the outercache that does not support LPAE works properly, do
cast phys_addr_t to unsigned long by adding a group of temporary
variables. For example:
-static void l2c220_inv_range(unsigned long start, unsigned long end)
+static void l2c220_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
Note that the outercache functions have been doing this cast before this
patch. So now, the cast is just moved into the outercache hook functions.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm/include/asm/outercache.h | 6 ++--
arch/arm/mm/cache-feroceon-l2.c | 15 ++++++++--
arch/arm/mm/cache-l2x0.c | 50 ++++++++++++++++++++++---------
arch/arm/mm/cache-tauros2.c | 15 ++++++++--
arch/arm/mm/cache-uniphier.c | 6 ++--
arch/arm/mm/cache-xsc3l2.c | 12 ++++++--
6 files changed, 75 insertions(+), 29 deletions(-)
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 3364637755e86aa..4cee1ea0c15449a 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -14,9 +14,9 @@
struct l2x0_regs;
struct outer_cache_fns {
- void (*inv_range)(unsigned long, unsigned long);
- void (*clean_range)(unsigned long, unsigned long);
- void (*flush_range)(unsigned long, unsigned long);
+ void (*inv_range)(phys_addr_t, phys_addr_t);
+ void (*clean_range)(phys_addr_t, phys_addr_t);
+ void (*flush_range)(phys_addr_t, phys_addr_t);
void (*flush_all)(void);
void (*disable)(void);
#ifdef CONFIG_OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 5c1b7a7b9af6300..10f909744d5e963 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -168,8 +168,11 @@ static unsigned long calc_range_end(unsigned long start, unsigned long end)
return range_end;
}
-static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
+static void feroceon_l2_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
/*
* Clean and invalidate partial first cache line.
*/
@@ -198,8 +201,11 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
dsb();
}
-static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
+static void feroceon_l2_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
/*
* If L2 is forced to WT, the L2 will always be clean and we
* don't need to do anything here.
@@ -217,8 +223,11 @@ static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
dsb();
}
-static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
+static void feroceon_l2_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
start &= ~(CACHE_LINE_SIZE - 1);
end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
while (start != end) {
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 43d91bfd2360086..cdaddd772b09ede 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -184,8 +184,10 @@ static void __l2c210_op_pa_range(void __iomem *reg, unsigned long start,
}
}
-static void l2c210_inv_range(unsigned long start, unsigned long end)
+static void l2c210_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
if (start & (CACHE_LINE_SIZE - 1)) {
@@ -203,8 +205,10 @@ static void l2c210_inv_range(unsigned long start, unsigned long end)
__l2c210_cache_sync(base);
}
-static void l2c210_clean_range(unsigned long start, unsigned long end)
+static void l2c210_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
start &= ~(CACHE_LINE_SIZE - 1);
@@ -212,8 +216,10 @@ static void l2c210_clean_range(unsigned long start, unsigned long end)
__l2c210_cache_sync(base);
}
-static void l2c210_flush_range(unsigned long start, unsigned long end)
+static void l2c210_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
start &= ~(CACHE_LINE_SIZE - 1);
@@ -304,8 +310,10 @@ static unsigned long l2c220_op_pa_range(void __iomem *reg, unsigned long start,
return flags;
}
-static void l2c220_inv_range(unsigned long start, unsigned long end)
+static void l2c220_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
unsigned long flags;
@@ -331,8 +339,10 @@ static void l2c220_inv_range(unsigned long start, unsigned long end)
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}
-static void l2c220_clean_range(unsigned long start, unsigned long end)
+static void l2c220_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
unsigned long flags;
@@ -350,8 +360,10 @@ static void l2c220_clean_range(unsigned long start, unsigned long end)
raw_spin_unlock_irqrestore(&l2x0_lock, flags);
}
-static void l2c220_flush_range(unsigned long start, unsigned long end)
+static void l2c220_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
unsigned long flags;
@@ -464,8 +476,10 @@ static const struct l2c_init_data l2c220_data = {
* Affects: store buffer
* store buffer is not automatically drained.
*/
-static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
+static void l2c310_inv_range_erratum(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
void __iomem *base = l2x0_base;
if ((start | end) & (CACHE_LINE_SIZE - 1)) {
@@ -496,8 +510,10 @@ static void l2c310_inv_range_erratum(unsigned long start, unsigned long end)
__l2c210_cache_sync(base);
}
-static void l2c310_flush_range_erratum(unsigned long start, unsigned long end)
+static void l2c310_flush_range_erratum(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
raw_spinlock_t *lock = &l2x0_lock;
unsigned long flags;
void __iomem *base = l2x0_base;
@@ -1400,12 +1416,12 @@ static void aurora_pa_range(unsigned long start, unsigned long end,
start = range_end;
}
}
-static void aurora_inv_range(unsigned long start, unsigned long end)
+static void aurora_inv_range(phys_addr_t start, phys_addr_t end)
{
aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
}
-static void aurora_clean_range(unsigned long start, unsigned long end)
+static void aurora_clean_range(phys_addr_t start, phys_addr_t end)
{
/*
* If L2 is forced to WT, the L2 will always be clean and we
@@ -1415,7 +1431,7 @@ static void aurora_clean_range(unsigned long start, unsigned long end)
aurora_pa_range(start, end, AURORA_CLEAN_RANGE_REG);
}
-static void aurora_flush_range(unsigned long start, unsigned long end)
+static void aurora_flush_range(phys_addr_t start, phys_addr_t end)
{
if (l2_wt_override)
aurora_pa_range(start, end, AURORA_INVAL_RANGE_REG);
@@ -1604,8 +1620,10 @@ static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
return addr + BCM_VC_EMI_OFFSET;
}
-static void bcm_inv_range(unsigned long start, unsigned long end)
+static void bcm_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
@@ -1631,8 +1649,10 @@ static void bcm_inv_range(unsigned long start, unsigned long end)
new_end);
}
-static void bcm_clean_range(unsigned long start, unsigned long end)
+static void bcm_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
@@ -1658,8 +1678,10 @@ static void bcm_clean_range(unsigned long start, unsigned long end)
new_end);
}
-static void bcm_flush_range(unsigned long start, unsigned long end)
+static void bcm_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 88255bea65e41e6..d768bbb5e05c690 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -66,8 +66,11 @@ static inline void tauros2_inv_pa(unsigned long addr)
*/
#define CACHE_LINE_SIZE 32
-static void tauros2_inv_range(unsigned long start, unsigned long end)
+static void tauros2_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
/*
* Clean and invalidate partial first cache line.
*/
@@ -95,8 +98,11 @@ static void tauros2_inv_range(unsigned long start, unsigned long end)
dsb();
}
-static void tauros2_clean_range(unsigned long start, unsigned long end)
+static void tauros2_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
tauros2_clean_pa(start);
@@ -106,8 +112,11 @@ static void tauros2_clean_range(unsigned long start, unsigned long end)
dsb();
}
-static void tauros2_flush_range(unsigned long start, unsigned long end)
+static void tauros2_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
+
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
tauros2_clean_inv_pa(start);
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
index ff2881458504329..e2508358e9f4082 100644
--- a/arch/arm/mm/cache-uniphier.c
+++ b/arch/arm/mm/cache-uniphier.c
@@ -250,17 +250,17 @@ static void uniphier_cache_maint_all(u32 operation)
__uniphier_cache_maint_all(data, operation);
}
-static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+static void uniphier_cache_inv_range(phys_addr_t start, phys_addr_t end)
{
uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
}
-static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+static void uniphier_cache_clean_range(phys_addr_t start, phys_addr_t end)
{
uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
}
-static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+static void uniphier_cache_flush_range(phys_addr_t start, phys_addr_t end)
{
uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
}
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index d20d7af02d10fc0..5814731653d9091 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -83,8 +83,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
#endif
}
-static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
+static void xsc3_l2_inv_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long vaddr;
if (start == 0 && end == -1ul) {
@@ -127,8 +129,10 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
dsb();
}
-static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
+static void xsc3_l2_clean_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long vaddr;
vaddr = -1; /* to force the first mapping */
@@ -165,8 +169,10 @@ static inline void xsc3_l2_flush_all(void)
dsb();
}
-static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
+static void xsc3_l2_flush_range(phys_addr_t pa_start, phys_addr_t pa_end)
{
+ unsigned long start = pa_start;
+ unsigned long end = pa_end;
unsigned long vaddr;
if (start == 0 && end == -1ul) {
--
2.26.0.106.g9fadedd
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v4 3/3] ARM: Add support for Hisilicon Kunpeng L3 cache controller
2021-01-13 9:39 [PATCH v4 0/3] ARM: Add support for Hisilicon Kunpeng L3 cache controller Zhen Lei
2021-01-13 9:39 ` [PATCH v4 1/3] ARM: LPAE: Use phys_addr_t instead of unsigned long in outercache hooks Zhen Lei
2021-01-13 9:39 ` [PATCH v4 2/3] dt-bindings: arm: hisilicon: Add binding for Kunpeng L3 cache controller Zhen Lei
@ 2021-01-13 9:39 ` Zhen Lei
2 siblings, 0 replies; 4+ messages in thread
From: Zhen Lei @ 2021-01-13 9:39 UTC (permalink / raw)
To: Russell King, Greg Kroah-Hartman, Will Deacon, Haojian Zhuang,
Arnd Bergmann, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Cc: Zhen Lei
Add support for the Hisilicon Kunpeng L3 cache controller as used with
Kunpeng506 and Kunpeng509 SoCs.
These Hisilicon SoCs support LPAE, so the physical addresses is wider than
32-bits, but the actual bit width does not exceed 36 bits. When the cache
operation is performed based on the address range, the upper 30 bits of
the physical address are recorded in registers L3_MAINT_START and
L3_MAINT_END, and ignore the lower 6 bits cacheline offset.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm/mm/Kconfig | 10 +++
arch/arm/mm/Makefile | 1 +
arch/arm/mm/cache-kunpeng-l3.c | 153 +++++++++++++++++++++++++++++++++
arch/arm/mm/cache-kunpeng-l3.h | 30 +++++++
4 files changed, 194 insertions(+)
create mode 100644 arch/arm/mm/cache-kunpeng-l3.c
create mode 100644 arch/arm/mm/cache-kunpeng-l3.h
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 02692fbe2db5c59..8cc16695a12fd2a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -1070,6 +1070,16 @@ config CACHE_XSC3L2
help
This option enables the L2 cache on XScale3.
+config CACHE_KUNPENG_L3
+ bool "Enable the Hisilicon Kunpeng L3 cache controller"
+ depends on ARCH_HISI && OF
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Kunpeng L3 cache controller on Hisilicon
+ Kunpeng506 and Kunpeng509 SoCs. It supports a maximum of 36-bit
+ physical addresses.
+
config ARM_L1_CACHE_SHIFT_6
bool
default y if CPU_V7
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 3510503bc5e688b..ececc5489e353eb 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -112,6 +112,7 @@ obj-$(CONFIG_CACHE_L2X0_PMU) += cache-l2x0-pmu.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o
+obj-$(CONFIG_CACHE_KUNPENG_L3) += cache-kunpeng-l3.o
KASAN_SANITIZE_kasan_init.o := n
obj-$(CONFIG_KASAN) += kasan_init.o
diff --git a/arch/arm/mm/cache-kunpeng-l3.c b/arch/arm/mm/cache-kunpeng-l3.c
new file mode 100644
index 000000000000000..cb81f15d26a0cf2
--- /dev/null
+++ b/arch/arm/mm/cache-kunpeng-l3.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Hisilicon Limited.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+
+#include "cache-kunpeng-l3.h"
+
+static DEFINE_SPINLOCK(l3cache_lock);
+static void __iomem *l3_ctrl_base;
+
+
+static void l3cache_maint_common(u32 range, u32 op_type)
+{
+ u32 reg;
+
+ reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+ reg &= ~(L3_MAINT_RANGE_MASK | L3_MAINT_TYPE_MASK);
+ reg |= range | op_type;
+ reg |= L3_MAINT_STATUS_START;
+ writel(reg, l3_ctrl_base + L3_MAINT_CTRL);
+
+ /* Wait until the hardware maintenance operation is complete. */
+ do {
+ cpu_relax();
+ reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+ } while ((reg & L3_MAINT_STATUS_MASK) != L3_MAINT_STATUS_END);
+}
+
+static void l3cache_maint_range(phys_addr_t start, phys_addr_t end, u32 op_type)
+{
+ start = start >> L3_CACHE_LINE_SHITF;
+ end = ((end - 1) >> L3_CACHE_LINE_SHITF) + 1;
+
+ writel(start, l3_ctrl_base + L3_MAINT_START);
+ writel(end, l3_ctrl_base + L3_MAINT_END);
+
+ l3cache_maint_common(L3_MAINT_RANGE_ADDR, op_type);
+}
+
+static inline void l3cache_flush_all_nolock(void)
+{
+ l3cache_maint_common(L3_MAINT_RANGE_ALL, L3_MAINT_TYPE_FLUSH);
+}
+
+static void l3cache_flush_all(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+ l3cache_flush_all_nolock();
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_inv_range(phys_addr_t start, phys_addr_t end)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+ l3cache_maint_range(start, end, L3_MAINT_TYPE_INV);
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_clean_range(phys_addr_t start, phys_addr_t end)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+ l3cache_maint_range(start, end, L3_MAINT_TYPE_CLEAN);
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_flush_range(phys_addr_t start, phys_addr_t end)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+ l3cache_maint_range(start, end, L3_MAINT_TYPE_FLUSH);
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_disable(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+ l3cache_flush_all_nolock();
+ writel(L3_CTRL_DISABLE, l3_ctrl_base + L3_CTRL);
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static const struct of_device_id l3cache_ids[] __initconst = {
+ {.compatible = "hisilicon,kunpeng-l3cache", .data = NULL},
+ {}
+};
+
+static int __init l3cache_init(void)
+{
+ u32 reg;
+ struct device_node *node;
+
+ node = of_find_matching_node(NULL, l3cache_ids);
+ if (!node)
+ return -ENODEV;
+
+ l3_ctrl_base = of_iomap(node, 0);
+ if (!l3_ctrl_base) {
+ pr_err("failed to map Kunpeng L3 cache controller registers\n");
+ return -ENOMEM;
+ }
+
+ reg = readl(l3_ctrl_base + L3_CTRL);
+ if (!(reg & L3_CTRL_ENABLE)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&l3cache_lock, flags);
+
+ /*
+ * Ensure that no L3 cache hardware maintenance operations are
+ * being performed before enabling the L3 cache. Wait for it to
+ * finish.
+ */
+ do {
+ cpu_relax();
+ reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+ } while ((reg & L3_MAINT_STATUS_MASK) != L3_MAINT_STATUS_END);
+
+ reg = readl(l3_ctrl_base + L3_AUCTRL);
+ reg |= L3_AUCTRL_EVENT_EN | L3_AUCTRL_ECC_EN;
+ writel(reg, l3_ctrl_base + L3_AUCTRL);
+
+ writel(L3_CTRL_ENABLE, l3_ctrl_base + L3_CTRL);
+
+ spin_unlock_irqrestore(&l3cache_lock, flags);
+ }
+
+ outer_cache.inv_range = l3cache_inv_range;
+ outer_cache.clean_range = l3cache_clean_range;
+ outer_cache.flush_range = l3cache_flush_range;
+ outer_cache.flush_all = l3cache_flush_all;
+ outer_cache.disable = l3cache_disable;
+
+ pr_info("Hisilicon Kunpeng L3 cache controller enabled\n");
+
+ return 0;
+}
+arch_initcall(l3cache_init);
diff --git a/arch/arm/mm/cache-kunpeng-l3.h b/arch/arm/mm/cache-kunpeng-l3.h
new file mode 100644
index 000000000000000..9ef6a53e7d4db49
--- /dev/null
+++ b/arch/arm/mm/cache-kunpeng-l3.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CACHE_KUNPENG_L3_H
+#define __CACHE_KUNPENG_L3_H
+
+#define L3_CACHE_LINE_SHITF 6
+
+#define L3_CTRL 0x0
+#define L3_CTRL_ENABLE (1U << 0)
+#define L3_CTRL_DISABLE (0U << 0)
+
+#define L3_AUCTRL 0x4
+#define L3_AUCTRL_EVENT_EN BIT(23)
+#define L3_AUCTRL_ECC_EN BIT(8)
+
+#define L3_MAINT_CTRL 0x20
+#define L3_MAINT_RANGE_MASK GENMASK(3, 3)
+#define L3_MAINT_RANGE_ALL (0U << 3)
+#define L3_MAINT_RANGE_ADDR (1U << 3)
+#define L3_MAINT_TYPE_MASK GENMASK(2, 1)
+#define L3_MAINT_TYPE_CLEAN (1U << 1)
+#define L3_MAINT_TYPE_INV (2U << 1)
+#define L3_MAINT_TYPE_FLUSH (3U << 1)
+#define L3_MAINT_STATUS_MASK GENMASK(0, 0)
+#define L3_MAINT_STATUS_START (1U << 0)
+#define L3_MAINT_STATUS_END (0U << 0)
+
+#define L3_MAINT_START 0x24
+#define L3_MAINT_END 0x28
+
+#endif
--
2.26.0.106.g9fadedd
^ permalink raw reply related [flat|nested] 4+ messages in thread