[PATCH v3 00/15] introduce a generic IOCTL interface for RPMsg channels management

[PATCH v3 00/15] introduce a generic IOCTL interface for RPMsg channels management

[Arnaud Pouliquen]

This series restructures the RPMsg char driver to decorrelate the control part and to
create a generic RPMsg ioctl interface compatible with other RPMsg services.

The V3 is based on the guideline proposed by Mathieu Poirier to keep as much as possible
the legacy implementation of the rpmsg_char used by the GLINK and SMD platforms.


Objectives of the series:
- Allow to create a service from Linux user application:
  - with a specific name
  - with or without name service announcement.
- Allow to probe the same service by receiving either a NS announcement from the remote firmware
  or a Linux user application request.
- Use these services independently of the RPMsg transport implementation (e.g be able to use
  RPMSg char with the RPMsg virtio bus).

Steps in the series:
  - Extract the control part of the char dev and create the rpmsg_ctrl.c file (patches 1 to 5)
  - Enable the use of the chardev with the virtio backend (patches 6 to 10)
  - Introduce the RPMSG_CREATE_DEV_IOCTL IOCTL to instantiate RPMsg devices (patch 11)
    The application can then create or release a channel by specifying:
       - the name service of the device to instantiate.   
       - the source address.
       - the destination address.
  - Instantiate the /dev/rpmsg interface on remote NS announcement (patches 12 to 15)

In this revision, I do not divide the series into several parts in order to show a complete
picture of the proposed evolution. To simplify the review, as a next step, I can send it in
several steps listed above.

Known current Limitations:
- Tested only with virtio RPMsg bus. The glink and smd drivers adaptations have not been tested
  (not able to test it).
- For the virtio backend: No NS announcement is sent to the remote processor if the source
  address is set to RPMSG_ADDR_ANY.
- For the virtio backend: the existing RPMSG_CREATE_EPT_IOCTL is working but the endpoints are
  not attached to an exiting channel.

This series can be tested on top of the v5.11-rc5 (6ee1d745b7c9).

This series can be tested using rpmsgexport, rpmsgcreatedev and ping tools available here:
https://github.com/arnopo/rpmsgexport.git

Reference to the V2 discussion thread: https://lkml.org/lkml/2020/12/22/207

Arnaud Pouliquen (15):
  rpmsg: char: rename rpmsg_char_init to rpmsg_chrdev_init
  rpmsg: move RPMSG_ADDR_ANY in user API and document the API
  rpmsg: char: export eptdev create an destroy functions
  rpmsg: char: dissociate the control device from the rpmsg class
  rpmsg: move the rpmsg control device from rpmsg_char to rpmsg_ctrl
  rpmsg: update rpmsg_chrdev_register_device function
  rpmsg: virtio: probe the rpmsg_ctrl device
  rpmsg: glink: add sendto and trysendto ops
  rpmsg: smd: add sendto and trysendto ops
  rpmsg: char: use sendto to specify the message destination address
  rpmsg: ctrl: introduce RPMSG_CREATE_DEV_IOCTL
  rpmsg: char: introduce __rpmsg_chrdev_create_eptdev function
  rpmsg: char: introduce a RPMsg driver for the RPmsg char device
  rpmsg: char: no dynamic endpoint management for the default one
  rpmsg: char: return an error if device already open

 drivers/rpmsg/Kconfig             |   9 ++
 drivers/rpmsg/Makefile            |   1 +
 drivers/rpmsg/qcom_glink_native.c |  18 ++-
 drivers/rpmsg/qcom_smd.c          |  18 ++-
 drivers/rpmsg/rpmsg_char.c        | 237 +++++++++++-----------------
 drivers/rpmsg/rpmsg_char.h        |  51 ++++++
 drivers/rpmsg/rpmsg_ctrl.c        | 247 ++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |  10 +-
 drivers/rpmsg/virtio_rpmsg_bus.c  |  37 ++++-
 include/linux/rpmsg.h             |   3 +-
 include/uapi/linux/rpmsg.h        |  18 ++-
 11 files changed, 483 insertions(+), 166 deletions(-)
 create mode 100644 drivers/rpmsg/rpmsg_char.h
 create mode 100644 drivers/rpmsg/rpmsg_ctrl.c

-- 
2.17.1

[PATCH v3 01/15] rpmsg: char: rename rpmsg_char_init to rpmsg_chrdev_init

[Arnaud Pouliquen]

To be coherent with the other functions which are prefixed by
rpmsg_chrdev, rename the rpmsg_chrdev_init function.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 4bbbacdbf3bb..9e33b53bbf56 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -543,7 +543,7 @@ static struct rpmsg_driver rpmsg_chrdev_driver = {
 	},
 };
 
-static int rpmsg_char_init(void)
+static int rpmsg_chrdev_init(void)
 {
 	int ret;
 
@@ -569,7 +569,7 @@ static int rpmsg_char_init(void)
 
 	return ret;
 }
-postcore_initcall(rpmsg_char_init);
+postcore_initcall(rpmsg_chrdev_init);
 
 static void rpmsg_chrdev_exit(void)
 {
-- 
2.17.1

[PATCH v3 02/15] rpmsg: move RPMSG_ADDR_ANY in user API and document the API

[Arnaud Pouliquen]

Add a short description of the user IO controls. As the RPMSG_ADDR_ANY
is a valid src or dst address, migrate its definition to be
able to add it in description.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 include/linux/rpmsg.h      |  3 +--
 include/uapi/linux/rpmsg.h | 13 +++++++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index a5db828b2420..d97dcd049f18 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -18,8 +18,7 @@
 #include <linux/mutex.h>
 #include <linux/poll.h>
 #include <linux/rpmsg/byteorder.h>
-
-#define RPMSG_ADDR_ANY		0xFFFFFFFF
+#include <uapi/linux/rpmsg.h>
 
 struct rpmsg_device;
 struct rpmsg_endpoint;
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index e14c6dab4223..f5ca8740f3fb 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -9,11 +9,13 @@
 #include <linux/ioctl.h>
 #include <linux/types.h>
 
+#define RPMSG_ADDR_ANY		0xFFFFFFFF
+
 /**
  * struct rpmsg_endpoint_info - endpoint info representation
  * @name: name of service
- * @src: local address
- * @dst: destination address
+ * @src: local address. To set to RPMSG_ADDR_ANY if not used.
+ * @dst: destination address. To set to RPMSG_ADDR_ANY if not used.
  */
 struct rpmsg_endpoint_info {
 	char name[32];
@@ -21,7 +23,14 @@ struct rpmsg_endpoint_info {
 	__u32 dst;
 };
 
+/**
+ * Instantiate a new rmpsg char device endpoint.
+ */
 #define RPMSG_CREATE_EPT_IOCTL	_IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
+
+/**
+ * Destroy a rpmsg char device endpoint created by the RPMSG_CREATE_EPT_IOCTL.
+ */
 #define RPMSG_DESTROY_EPT_IOCTL	_IO(0xb5, 0x2)
 
 #endif
-- 
2.17.1

[PATCH v3 03/15] rpmsg: char: export eptdev create an destroy functions

[Arnaud Pouliquen]

To prepare the split code related to the control and the endpoint
devices in separate files:
- suppress the dependency with the rpmsg_ctrldev struct,
- rename and export the functions in rpmsg_char.h.

Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 22 ++++++++++------
 drivers/rpmsg/rpmsg_char.h | 51 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+), 7 deletions(-)
 create mode 100644 drivers/rpmsg/rpmsg_char.h

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 9e33b53bbf56..78a6d19fdf82 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
+ * Copyright (C) 2021, STMicroelectronics
  * Copyright (c) 2016, Linaro Ltd.
  * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2012, PetaLogix
@@ -22,6 +23,7 @@
 #include <linux/uaccess.h>
 #include <uapi/linux/rpmsg.h>
 
+#include "rpmsg_char.h"
 #include "rpmsg_internal.h"
 
 #define RPMSG_DEV_MAX	(MINORMASK + 1)
@@ -78,7 +80,7 @@ struct rpmsg_eptdev {
 	wait_queue_head_t readq;
 };
 
-static int rpmsg_eptdev_destroy(struct device *dev, void *data)
+static int rpmsg_eptdev_destroy(struct device *dev)
 {
 	struct rpmsg_eptdev *eptdev = dev_to_eptdev(dev);
 
@@ -277,7 +279,7 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 	if (cmd != RPMSG_DESTROY_EPT_IOCTL)
 		return -EINVAL;
 
-	return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+	return rpmsg_eptdev_destroy(&eptdev->dev);
 }
 
 static const struct file_operations rpmsg_eptdev_fops = {
@@ -336,10 +338,15 @@ static void rpmsg_eptdev_release_device(struct device *dev)
 	kfree(eptdev);
 }
 
-static int rpmsg_eptdev_create(struct rpmsg_ctrldev *ctrldev,
+int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
+{
+	return rpmsg_eptdev_destroy(dev);
+}
+EXPORT_SYMBOL(rpmsg_chrdev_eptdev_destroy);
+
+int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent,
 			       struct rpmsg_channel_info chinfo)
 {
-	struct rpmsg_device *rpdev = ctrldev->rpdev;
 	struct rpmsg_eptdev *eptdev;
 	struct device *dev;
 	int ret;
@@ -359,7 +366,7 @@ static int rpmsg_eptdev_create(struct rpmsg_ctrldev *ctrldev,
 
 	device_initialize(dev);
 	dev->class = rpmsg_class;
-	dev->parent = &ctrldev->dev;
+	dev->parent = parent;
 	dev->groups = rpmsg_eptdev_groups;
 	dev_set_drvdata(dev, eptdev);
 
@@ -402,6 +409,7 @@ static int rpmsg_eptdev_create(struct rpmsg_ctrldev *ctrldev,
 
 	return ret;
 }
+EXPORT_SYMBOL(rpmsg_chrdev_create_eptdev);
 
 static int rpmsg_ctrldev_open(struct inode *inode, struct file *filp)
 {
@@ -441,7 +449,7 @@ static long rpmsg_ctrldev_ioctl(struct file *fp, unsigned int cmd,
 	chinfo.src = eptinfo.src;
 	chinfo.dst = eptinfo.dst;
 
-	return rpmsg_eptdev_create(ctrldev, chinfo);
+	return rpmsg_chrdev_create_eptdev(ctrldev->rpdev, &ctrldev->dev, chinfo);
 };
 
 static const struct file_operations rpmsg_ctrldev_fops = {
@@ -527,7 +535,7 @@ static void rpmsg_chrdev_remove(struct rpmsg_device *rpdev)
 	int ret;
 
 	/* Destroy all endpoints */
-	ret = device_for_each_child(&ctrldev->dev, NULL, rpmsg_eptdev_destroy);
+	ret = device_for_each_child(&ctrldev->dev, NULL, rpmsg_chrdev_eptdev_destroy);
 	if (ret)
 		dev_warn(&rpdev->dev, "failed to nuke endpoints: %d\n", ret);
 
diff --git a/drivers/rpmsg/rpmsg_char.h b/drivers/rpmsg/rpmsg_char.h
new file mode 100644
index 000000000000..0feb3ea9445c
--- /dev/null
+++ b/drivers/rpmsg/rpmsg_char.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) STMicroelectronics 2021.
+ */
+
+#ifndef __RPMSG_CHRDEV_H__
+#define __RPMSG_CHRDEV_H__
+
+#if IS_ENABLED(CONFIG_RPMSG_CHAR)
+/**
+ * rpmsg_chrdev_create_eptdev() - register char device based on an endpoint
+ * @rpdev:  prepared rpdev to be used for creating endpoints
+ * @parent: parent device
+ * @chinfo: assiated endpoint channel information.
+ *
+ * This function create a new rpmsg char endpoint device to instantiate a new
+ * endpoint based on chinfo information.
+ */
+int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent,
+			       struct rpmsg_channel_info chinfo);
+
+/**
+ * rpmsg_chrdev_eptdev_destroy() - destroy created char device
+ * @data: parent device
+ * @chinfo: assiated endpoint channel information.
+ *
+ * This function create a new rpmsg char endpoint device to instantiate a new
+ * endpoint based on chinfo information.
+ */
+int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data);
+
+#else  /*IS_ENABLED(CONFIG_RPMSG_CHAR) */
+
+static inline int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev,
+					     struct device *parent,
+					     struct rpmsg_channel_info chinfo)
+{
+	return -EINVAL;
+}
+
+static inline int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return 0;
+}
+
+#endif /*IS_ENABLED(CONFIG_RPMSG_CHAR) */
+
+#endif /*__RPMSG_CHRDEV_H__ */
-- 
2.17.1

[PATCH v3 04/15] rpmsg: char: dissociate the control device from the rpmsg class

[Arnaud Pouliquen]

The RPMsg control device is a RPMsg device, it is already
referenced in the RPMsg bus. There is only an interest to
reference the ept char devices in the rpmsg class.
This patch prepares the code split of the control and end point
devices in two separate files.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 78a6d19fdf82..23e369a00531 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -485,7 +485,6 @@ static int rpmsg_chrdev_probe(struct rpmsg_device *rpdev)
 	dev = &ctrldev->dev;
 	device_initialize(dev);
 	dev->parent = &rpdev->dev;
-	dev->class = rpmsg_class;
 
 	cdev_init(&ctrldev->cdev, &rpmsg_ctrldev_fops);
 	ctrldev->cdev.owner = THIS_MODULE;
-- 
2.17.1

[PATCH v3 05/15] rpmsg: move the rpmsg control device from rpmsg_char to rpmsg_ctrl

[Arnaud Pouliquen]

Move the code related to the rpmsg_ctrl char device to the new
rpmsg_ctrl.c module.
Manage the dependency in the kconfig.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/Kconfig      |   9 ++
 drivers/rpmsg/Makefile     |   1 +
 drivers/rpmsg/rpmsg_char.c | 163 ----------------------------
 drivers/rpmsg/rpmsg_ctrl.c | 216 +++++++++++++++++++++++++++++++++++++
 4 files changed, 226 insertions(+), 163 deletions(-)
 create mode 100644 drivers/rpmsg/rpmsg_ctrl.c

diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index 0b4407abdf13..2d0cd7fdd710 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -10,11 +10,20 @@ config RPMSG_CHAR
 	tristate "RPMSG device interface"
 	depends on RPMSG
 	depends on NET
+	select RPMSG_CTRL
 	help
 	  Say Y here to export rpmsg endpoints as device files, usually found
 	  in /dev. They make it possible for user-space programs to send and
 	  receive rpmsg packets.
 
+config RPMSG_CTRL
+	tristate "RPMSG control interface"
+	depends on RPMSG
+	help
+	  Say Y here to enable the support of the /dev/rpmsg_ctlX API. This API
+	  allows user-space programs to create endpoints with specific service name,
+	  source and destination addresses.
+
 config RPMSG_NS
 	tristate "RPMSG name service announcement"
 	depends on RPMSG
diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
index 8d452656f0ee..58e3b382e316 100644
--- a/drivers/rpmsg/Makefile
+++ b/drivers/rpmsg/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_RPMSG)		+= rpmsg_core.o
 obj-$(CONFIG_RPMSG_CHAR)	+= rpmsg_char.o
+obj-$(CONFIG_RPMSG_CTRL)	+= rpmsg_ctrl.o
 obj-$(CONFIG_RPMSG_NS)		+= rpmsg_ns.o
 obj-$(CONFIG_RPMSG_MTK_SCP)	+= mtk_rpmsg.o
 qcom_glink-objs			:= qcom_glink_native.o qcom_glink_ssr.o
diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 23e369a00531..83c10b39b139 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -31,28 +31,12 @@
 static dev_t rpmsg_major;
 static struct class *rpmsg_class;
 
-static DEFINE_IDA(rpmsg_ctrl_ida);
 static DEFINE_IDA(rpmsg_ept_ida);
 static DEFINE_IDA(rpmsg_minor_ida);
 
 #define dev_to_eptdev(dev) container_of(dev, struct rpmsg_eptdev, dev)
 #define cdev_to_eptdev(i_cdev) container_of(i_cdev, struct rpmsg_eptdev, cdev)
 
-#define dev_to_ctrldev(dev) container_of(dev, struct rpmsg_ctrldev, dev)
-#define cdev_to_ctrldev(i_cdev) container_of(i_cdev, struct rpmsg_ctrldev, cdev)
-
-/**
- * struct rpmsg_ctrldev - control device for instantiating endpoint devices
- * @rpdev:	underlaying rpmsg device
- * @cdev:	cdev for the ctrl device
- * @dev:	device for the ctrl device
- */
-struct rpmsg_ctrldev {
-	struct rpmsg_device *rpdev;
-	struct cdev cdev;
-	struct device dev;
-};
-
 /**
  * struct rpmsg_eptdev - endpoint device context
  * @dev:	endpoint device
@@ -411,145 +395,6 @@ int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent
 }
 EXPORT_SYMBOL(rpmsg_chrdev_create_eptdev);
 
-static int rpmsg_ctrldev_open(struct inode *inode, struct file *filp)
-{
-	struct rpmsg_ctrldev *ctrldev = cdev_to_ctrldev(inode->i_cdev);
-
-	get_device(&ctrldev->dev);
-	filp->private_data = ctrldev;
-
-	return 0;
-}
-
-static int rpmsg_ctrldev_release(struct inode *inode, struct file *filp)
-{
-	struct rpmsg_ctrldev *ctrldev = cdev_to_ctrldev(inode->i_cdev);
-
-	put_device(&ctrldev->dev);
-
-	return 0;
-}
-
-static long rpmsg_ctrldev_ioctl(struct file *fp, unsigned int cmd,
-				unsigned long arg)
-{
-	struct rpmsg_ctrldev *ctrldev = fp->private_data;
-	void __user *argp = (void __user *)arg;
-	struct rpmsg_endpoint_info eptinfo;
-	struct rpmsg_channel_info chinfo;
-
-	if (cmd != RPMSG_CREATE_EPT_IOCTL)
-		return -EINVAL;
-
-	if (copy_from_user(&eptinfo, argp, sizeof(eptinfo)))
-		return -EFAULT;
-
-	memcpy(chinfo.name, eptinfo.name, RPMSG_NAME_SIZE);
-	chinfo.name[RPMSG_NAME_SIZE-1] = '\0';
-	chinfo.src = eptinfo.src;
-	chinfo.dst = eptinfo.dst;
-
-	return rpmsg_chrdev_create_eptdev(ctrldev->rpdev, &ctrldev->dev, chinfo);
-};
-
-static const struct file_operations rpmsg_ctrldev_fops = {
-	.owner = THIS_MODULE,
-	.open = rpmsg_ctrldev_open,
-	.release = rpmsg_ctrldev_release,
-	.unlocked_ioctl = rpmsg_ctrldev_ioctl,
-	.compat_ioctl = compat_ptr_ioctl,
-};
-
-static void rpmsg_ctrldev_release_device(struct device *dev)
-{
-	struct rpmsg_ctrldev *ctrldev = dev_to_ctrldev(dev);
-
-	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
-	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
-	cdev_del(&ctrldev->cdev);
-	kfree(ctrldev);
-}
-
-static int rpmsg_chrdev_probe(struct rpmsg_device *rpdev)
-{
-	struct rpmsg_ctrldev *ctrldev;
-	struct device *dev;
-	int ret;
-
-	ctrldev = kzalloc(sizeof(*ctrldev), GFP_KERNEL);
-	if (!ctrldev)
-		return -ENOMEM;
-
-	ctrldev->rpdev = rpdev;
-
-	dev = &ctrldev->dev;
-	device_initialize(dev);
-	dev->parent = &rpdev->dev;
-
-	cdev_init(&ctrldev->cdev, &rpmsg_ctrldev_fops);
-	ctrldev->cdev.owner = THIS_MODULE;
-
-	ret = ida_simple_get(&rpmsg_minor_ida, 0, RPMSG_DEV_MAX, GFP_KERNEL);
-	if (ret < 0)
-		goto free_ctrldev;
-	dev->devt = MKDEV(MAJOR(rpmsg_major), ret);
-
-	ret = ida_simple_get(&rpmsg_ctrl_ida, 0, 0, GFP_KERNEL);
-	if (ret < 0)
-		goto free_minor_ida;
-	dev->id = ret;
-	dev_set_name(&ctrldev->dev, "rpmsg_ctrl%d", ret);
-
-	ret = cdev_add(&ctrldev->cdev, dev->devt, 1);
-	if (ret)
-		goto free_ctrl_ida;
-
-	/* We can now rely on the release function for cleanup */
-	dev->release = rpmsg_ctrldev_release_device;
-
-	ret = device_add(dev);
-	if (ret) {
-		dev_err(&rpdev->dev, "device_add failed: %d\n", ret);
-		put_device(dev);
-	}
-
-	dev_set_drvdata(&rpdev->dev, ctrldev);
-
-	return ret;
-
-free_ctrl_ida:
-	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
-free_minor_ida:
-	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
-free_ctrldev:
-	put_device(dev);
-	kfree(ctrldev);
-
-	return ret;
-}
-
-static void rpmsg_chrdev_remove(struct rpmsg_device *rpdev)
-{
-	struct rpmsg_ctrldev *ctrldev = dev_get_drvdata(&rpdev->dev);
-	int ret;
-
-	/* Destroy all endpoints */
-	ret = device_for_each_child(&ctrldev->dev, NULL, rpmsg_chrdev_eptdev_destroy);
-	if (ret)
-		dev_warn(&rpdev->dev, "failed to nuke endpoints: %d\n", ret);
-
-	device_del(&ctrldev->dev);
-	put_device(&ctrldev->dev);
-}
-
-static struct rpmsg_driver rpmsg_chrdev_driver = {
-	.probe = rpmsg_chrdev_probe,
-	.remove = rpmsg_chrdev_remove,
-	.drv = {
-		.name = "rpmsg_chrdev",
-	},
-};
-
 static int rpmsg_chrdev_init(void)
 {
 	int ret;
@@ -567,20 +412,12 @@ static int rpmsg_chrdev_init(void)
 		return PTR_ERR(rpmsg_class);
 	}
 
-	ret = register_rpmsg_driver(&rpmsg_chrdev_driver);
-	if (ret < 0) {
-		pr_err("rpmsgchr: failed to register rpmsg driver\n");
-		class_destroy(rpmsg_class);
-		unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
-	}
-
 	return ret;
 }
 postcore_initcall(rpmsg_chrdev_init);
 
 static void rpmsg_chrdev_exit(void)
 {
-	unregister_rpmsg_driver(&rpmsg_chrdev_driver);
 	class_destroy(rpmsg_class);
 	unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
 }
diff --git a/drivers/rpmsg/rpmsg_ctrl.c b/drivers/rpmsg/rpmsg_ctrl.c
new file mode 100644
index 000000000000..fa05b67d24da
--- /dev/null
+++ b/drivers/rpmsg/rpmsg_ctrl.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021, STMicroelectronics
+ * Copyright (c) 2016, Linaro Ltd.
+ * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
+ * Copyright (c) 2012, PetaLogix
+ * Copyright (c) 2011, Texas Instruments, Inc.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Based on rpmsg performance statistics driver by Michal Simek, which in turn
+ * was based on TI & Google OMX rpmsg driver.
+ */
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <uapi/linux/rpmsg.h>
+
+#include "rpmsg_char.h"
+#include "rpmsg_internal.h"
+
+#define RPMSG_DEV_MAX	(MINORMASK + 1)
+
+static dev_t rpmsg_major;
+
+static DEFINE_IDA(rpmsg_ctrl_ida);
+static DEFINE_IDA(rpmsg_minor_ida);
+
+#define dev_to_ctrldev(dev) container_of(dev, struct rpmsg_ctrl, dev)
+#define cdev_to_ctrldev(i_cdev) container_of(i_cdev, struct rpmsg_ctrl, cdev)
+
+/**
+ * struct rpmsg_ctrl - control device for instantiating endpoint devices
+ * @rpdev:	underlaying rpmsg device
+ * @cdev:	cdev for the ctrl device
+ * @dev:	device for the ctrl device
+ */
+struct rpmsg_ctrl {
+	struct rpmsg_device *rpdev;
+	struct cdev cdev;
+	struct device dev;
+};
+
+static int rpmsg_ctrl_open(struct inode *inode, struct file *filp)
+{
+	struct rpmsg_ctrl *ctrldev = cdev_to_ctrldev(inode->i_cdev);
+
+	get_device(&ctrldev->dev);
+	filp->private_data = ctrldev;
+
+	return 0;
+}
+
+static int rpmsg_ctrl_release(struct inode *inode, struct file *filp)
+{
+	struct rpmsg_ctrl *ctrldev = cdev_to_ctrldev(inode->i_cdev);
+
+	put_device(&ctrldev->dev);
+
+	return 0;
+}
+
+static long rpmsg_ctrl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	struct rpmsg_ctrl *ctrldev = fp->private_data;
+	void __user *argp = (void __user *)arg;
+	struct rpmsg_endpoint_info eptinfo;
+	struct rpmsg_channel_info chinfo;
+
+	if (cmd != RPMSG_CREATE_EPT_IOCTL)
+		return -EINVAL;
+
+	if (copy_from_user(&eptinfo, argp, sizeof(eptinfo)))
+		return -EFAULT;
+
+	memcpy(chinfo.name, eptinfo.name, RPMSG_NAME_SIZE);
+	chinfo.name[RPMSG_NAME_SIZE - 1] = '\0';
+	chinfo.src = eptinfo.src;
+	chinfo.dst = eptinfo.dst;
+
+	return rpmsg_chrdev_create_eptdev(ctrldev->rpdev, &ctrldev->dev, chinfo);
+};
+
+static const struct file_operations rpmsg_ctrl_fops = {
+	.owner = THIS_MODULE,
+	.open = rpmsg_ctrl_open,
+	.release = rpmsg_ctrl_release,
+	.unlocked_ioctl = rpmsg_ctrl_ioctl,
+	.compat_ioctl = compat_ptr_ioctl,
+};
+
+static void rpmsg_ctrl_release_device(struct device *dev)
+{
+	struct rpmsg_ctrl *ctrldev = dev_to_ctrldev(dev);
+
+	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
+	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
+	cdev_del(&ctrldev->cdev);
+	kfree(ctrldev);
+}
+
+static int rpmsg_ctrl_probe(struct rpmsg_device *rpdev)
+{
+	struct rpmsg_ctrl *ctrldev;
+	struct device *dev;
+	int ret;
+
+	ctrldev = kzalloc(sizeof(*ctrldev), GFP_KERNEL);
+	if (!ctrldev)
+		return -ENOMEM;
+
+	ctrldev->rpdev = rpdev;
+
+	dev = &ctrldev->dev;
+	device_initialize(dev);
+	dev->parent = &rpdev->dev;
+
+	cdev_init(&ctrldev->cdev, &rpmsg_ctrl_fops);
+	ctrldev->cdev.owner = THIS_MODULE;
+
+	ret = ida_simple_get(&rpmsg_minor_ida, 0, RPMSG_DEV_MAX, GFP_KERNEL);
+	if (ret < 0)
+		goto free_ctrldev;
+	dev->devt = MKDEV(MAJOR(rpmsg_major), ret);
+
+	ret = ida_simple_get(&rpmsg_ctrl_ida, 0, 0, GFP_KERNEL);
+	if (ret < 0)
+		goto free_minor_ida;
+	dev->id = ret;
+	dev_set_name(&ctrldev->dev, "rpmsg_ctrl%d", ret);
+
+	ret = cdev_add(&ctrldev->cdev, dev->devt, 1);
+	if (ret)
+		goto free_ctrl_ida;
+
+	/* We can now rely on the release function for cleanup */
+	dev->release = rpmsg_ctrl_release_device;
+
+	ret = device_add(dev);
+	if (ret) {
+		dev_err(&rpdev->dev, "device_add failed: %d\n", ret);
+		put_device(dev);
+	}
+
+	dev_set_drvdata(&rpdev->dev, ctrldev);
+
+	return ret;
+
+free_ctrl_ida:
+	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
+free_minor_ida:
+	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
+free_ctrldev:
+	put_device(dev);
+	kfree(ctrldev);
+
+	return ret;
+}
+
+static void rpmsg_ctrl_remove(struct rpmsg_device *rpdev)
+{
+	struct rpmsg_ctrl *ctrldev = dev_get_drvdata(&rpdev->dev);
+	int ret;
+
+	/* Destroy all endpoints */
+	ret = device_for_each_child(&ctrldev->dev, NULL,
+				    rpmsg_chrdev_eptdev_destroy);
+	if (ret)
+		dev_warn(&rpdev->dev, "failed to nuke endpoints: %d\n", ret);
+
+	device_del(&ctrldev->dev);
+	put_device(&ctrldev->dev);
+}
+
+static struct rpmsg_driver rpmsg_ctrl_driver = {
+	.probe = rpmsg_ctrl_probe,
+	.remove = rpmsg_ctrl_remove,
+	.drv = {
+		.name = "rpmsg_chrdev",
+	},
+};
+
+static int rpmsg_ctrl_init(void)
+{
+	int ret;
+
+	ret = alloc_chrdev_region(&rpmsg_major, 0, RPMSG_DEV_MAX, "rpmsg");
+	if (ret < 0) {
+		pr_err("rpmsg: failed to allocate char dev region\n");
+		return ret;
+	}
+
+	ret = register_rpmsg_driver(&rpmsg_ctrl_driver);
+	if (ret < 0) {
+		pr_err("rpmsg ctrl: failed to register rpmsg driver\n");
+		unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
+	}
+
+	return ret;
+}
+postcore_initcall(rpmsg_ctrl_init);
+
+static void rpmsg_ctrl_exit(void)
+{
+	unregister_rpmsg_driver(&rpmsg_ctrl_driver);
+	unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
+}
+module_exit(rpmsg_ctrl_exit);
+
+MODULE_DESCRIPTION("rpmsg control interface");
+MODULE_ALIAS("rpmsg:" KBUILD_MODNAME);
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

[PATCH v3 06/15] rpmsg: update rpmsg_chrdev_register_device function

[Arnaud Pouliquen]

As driver is now the rpmsg_ioctl, rename the function.
In addition, to avoid probe issue related to module dependency,
move the function in the rpmsg_ctrl module. This ensure that the
rpmsg_ctrl module is loaded before that the device is created.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/qcom_glink_native.c |  2 +-
 drivers/rpmsg/qcom_smd.c          |  2 +-
 drivers/rpmsg/rpmsg_ctrl.c        | 20 +++++++++++++++++++-
 drivers/rpmsg/rpmsg_internal.h    | 10 ++--------
 4 files changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 27a05167c18c..d4e4dd482614 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1625,7 +1625,7 @@ static int qcom_glink_create_chrdev(struct qcom_glink *glink)
 	rpdev->dev.parent = glink->dev;
 	rpdev->dev.release = qcom_glink_device_release;
 
-	return rpmsg_chrdev_register_device(rpdev);
+	return rpmsg_ctrl_register_device(rpdev);
 }
 
 struct qcom_glink *qcom_glink_native_probe(struct device *dev,
diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 19903de6268d..40a1c415c775 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1097,7 +1097,7 @@ static int qcom_smd_create_chrdev(struct qcom_smd_edge *edge)
 	qsdev->rpdev.dev.parent = &edge->dev;
 	qsdev->rpdev.dev.release = qcom_smd_release_device;
 
-	return rpmsg_chrdev_register_device(&qsdev->rpdev);
+	return rpmsg_ctrl_register_device(&qsdev->rpdev);
 }
 
 /*
diff --git a/drivers/rpmsg/rpmsg_ctrl.c b/drivers/rpmsg/rpmsg_ctrl.c
index fa05b67d24da..f9b90e927fff 100644
--- a/drivers/rpmsg/rpmsg_ctrl.c
+++ b/drivers/rpmsg/rpmsg_ctrl.c
@@ -176,11 +176,29 @@ static void rpmsg_ctrl_remove(struct rpmsg_device *rpdev)
 	put_device(&ctrldev->dev);
 }
 
+/**
+ * rpmsg_ctrl_register_device() - register name service device based on rpdev
+ * @rpdev: prepared rpdev to be used for creating endpoints
+ *
+ * This function wraps rpmsg_register_device() preparing the rpdev for use as
+ * basis for the rpmsg control service device.
+ */
+int rpmsg_ctrl_register_device(struct rpmsg_device *rpdev)
+{
+	strcpy(rpdev->id.name, "rpmsg_ctrl");
+	rpdev->driver_override = KBUILD_MODNAME;
+	rpdev->src = RPMSG_ADDR_ANY;
+	rpdev->dst = RPMSG_ADDR_ANY;
+
+	return rpmsg_register_device(rpdev);
+}
+EXPORT_SYMBOL(rpmsg_ctrl_register_device);
+
 static struct rpmsg_driver rpmsg_ctrl_driver = {
 	.probe = rpmsg_ctrl_probe,
 	.remove = rpmsg_ctrl_remove,
 	.drv = {
-		.name = "rpmsg_chrdev",
+		.name = KBUILD_MODNAME,
 	},
 };
 
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index a76c344253bf..a9e04641866c 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -82,18 +82,12 @@ struct rpmsg_device *rpmsg_create_channel(struct rpmsg_device *rpdev,
 int rpmsg_release_channel(struct rpmsg_device *rpdev,
 			  struct rpmsg_channel_info *chinfo);
 /**
- * rpmsg_chrdev_register_device() - register chrdev device based on rpdev
+ * rpmsg_ctrl_register_device() - register chrdev device based on rpdev
  * @rpdev:	prepared rpdev to be used for creating endpoints
  *
  * This function wraps rpmsg_register_device() preparing the rpdev for use as
  * basis for the rpmsg chrdev.
  */
-static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev)
-{
-	strcpy(rpdev->id.name, "rpmsg_chrdev");
-	rpdev->driver_override = "rpmsg_chrdev";
-
-	return rpmsg_register_device(rpdev);
-}
+int rpmsg_ctrl_register_device(struct rpmsg_device *rpdev);
 
 #endif
-- 
2.17.1

Re: [PATCH v3 06/15] rpmsg: update rpmsg_chrdev_register_device function

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2024 bytes --]

Hi Arnaud,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.11-rc6 next-20210125]
[cannot apply to rpmsg/for-next agross-msm/qcom/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 61556703b610a104de324e4f061dc6cf7b218b46
config: openrisc-randconfig-r001-20210204 (attached as .config)
compiler: or1k-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/23c166e0b157f0695fa7daefb8c5e30f383c3efd
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
        git checkout 23c166e0b157f0695fa7daefb8c5e30f383c3efd
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=openrisc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   or1k-linux-ld: drivers/rpmsg/qcom_glink_native.o: in function `qcom_glink_native_probe':
>> qcom_glink_native.c:(.text+0x2e88): undefined reference to `rpmsg_ctrl_register_device'
   qcom_glink_native.c:(.text+0x2e88): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `rpmsg_ctrl_register_device'

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 30850 bytes --]

Re: [PATCH v3 06/15] rpmsg: update rpmsg_chrdev_register_device function

[Arnaud POULIQUEN]

On 2/4/21 1:44 PM, kernel test robot wrote:
> Hi Arnaud,
> 
> I love your patch! Yet something to improve:
> 
> [auto build test ERROR on linus/master]
> [also build test ERROR on v5.11-rc6 next-20210125]
> [cannot apply to rpmsg/for-next agross-msm/qcom/for-next]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 61556703b610a104de324e4f061dc6cf7b218b46
> config: openrisc-randconfig-r001-20210204 (attached as .config)
> compiler: or1k-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/23c166e0b157f0695fa7daefb8c5e30f383c3efd
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
>         git checkout 23c166e0b157f0695fa7daefb8c5e30f383c3efd
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=openrisc 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>>
> All errors (new ones prefixed by >>):
> 
>    or1k-linux-ld: drivers/rpmsg/qcom_glink_native.o: in function `qcom_glink_native_probe':
>>> qcom_glink_native.c:(.text+0x2e88): undefined reference to `rpmsg_ctrl_register_device'
>    qcom_glink_native.c:(.text+0x2e88): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `rpmsg_ctrl_register_device'

Thanks for highlighting it!

I await further review comments first, but I will address this in my next
revision, if it still relevant.

> 
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
> 

Re: [PATCH v3 06/15] rpmsg: update rpmsg_chrdev_register_device function

[Mathieu Poirier]

On Thu, 4 Feb 2021 at 08:11, Arnaud POULIQUEN
<arnaud.pouliquen@foss.st.com> wrote:
>
>
>
> On 2/4/21 1:44 PM, kernel test robot wrote:
> > Hi Arnaud,
> >
> > I love your patch! Yet something to improve:
> >
> > [auto build test ERROR on linus/master]
> > [also build test ERROR on v5.11-rc6 next-20210125]
> > [cannot apply to rpmsg/for-next agross-msm/qcom/for-next]
> > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > And when submitting patch, we suggest to use '--base' as documented in
> > https://git-scm.com/docs/git-format-patch]
> >
> > url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
> > base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 61556703b610a104de324e4f061dc6cf7b218b46
> > config: openrisc-randconfig-r001-20210204 (attached as .config)
> > compiler: or1k-linux-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> >         chmod +x ~/bin/make.cross
> >         # https://github.com/0day-ci/linux/commit/23c166e0b157f0695fa7daefb8c5e30f383c3efd
> >         git remote add linux-review https://github.com/0day-ci/linux
> >         git fetch --no-tags linux-review Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
> >         git checkout 23c166e0b157f0695fa7daefb8c5e30f383c3efd
> >         # save the attached .config to linux build tree
> >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=openrisc
> >
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>>
> > All errors (new ones prefixed by >>):
> >
> >    or1k-linux-ld: drivers/rpmsg/qcom_glink_native.o: in function `qcom_glink_native_probe':
> >>> qcom_glink_native.c:(.text+0x2e88): undefined reference to `rpmsg_ctrl_register_device'
> >    qcom_glink_native.c:(.text+0x2e88): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `rpmsg_ctrl_register_device'
>
> Thanks for highlighting it!
>
> I await further review comments first, but I will address this in my next
> revision, if it still relevant.

I will be surprised if I get to look at your patchset before February
22nd so it may be better to address the above.

>
> >
> > ---
> > 0-DAY CI Kernel Test Service, Intel Corporation
> > https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
> >

Re: [PATCH v3 06/15] rpmsg: update rpmsg_chrdev_register_device function

[Arnaud POULIQUEN]

On 2/4/21 5:53 PM, Mathieu Poirier wrote:
> On Thu, 4 Feb 2021 at 08:11, Arnaud POULIQUEN
> <arnaud.pouliquen@foss.st.com> wrote:
>>
>>
>>
>> On 2/4/21 1:44 PM, kernel test robot wrote:
>>> Hi Arnaud,
>>>
>>> I love your patch! Yet something to improve:
>>>
>>> [auto build test ERROR on linus/master]
>>> [also build test ERROR on v5.11-rc6 next-20210125]
>>> [cannot apply to rpmsg/for-next agross-msm/qcom/for-next]
>>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>>> And when submitting patch, we suggest to use '--base' as documented in
>>> https://git-scm.com/docs/git-format-patch]
>>>
>>> url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
>>> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 61556703b610a104de324e4f061dc6cf7b218b46
>>> config: openrisc-randconfig-r001-20210204 (attached as .config)
>>> compiler: or1k-linux-gcc (GCC) 9.3.0
>>> reproduce (this is a W=1 build):
>>>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>>         chmod +x ~/bin/make.cross
>>>         # https://github.com/0day-ci/linux/commit/23c166e0b157f0695fa7daefb8c5e30f383c3efd
>>>         git remote add linux-review https://github.com/0day-ci/linux
>>>         git fetch --no-tags linux-review Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
>>>         git checkout 23c166e0b157f0695fa7daefb8c5e30f383c3efd
>>>         # save the attached .config to linux build tree
>>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=openrisc
>>>
>>> If you fix the issue, kindly add following tag as appropriate
>>> Reported-by: kernel test robot <lkp@intel.com>>
>>> All errors (new ones prefixed by >>):
>>>
>>>    or1k-linux-ld: drivers/rpmsg/qcom_glink_native.o: in function `qcom_glink_native_probe':
>>>>> qcom_glink_native.c:(.text+0x2e88): undefined reference to `rpmsg_ctrl_register_device'
>>>    qcom_glink_native.c:(.text+0x2e88): relocation truncated to fit: R_OR1K_INSN_REL_26 against undefined symbol `rpmsg_ctrl_register_device'
>>
>> Thanks for highlighting it!
>>
>> I await further review comments first, but I will address this in my next
>> revision, if it still relevant.
> 
> I will be surprised if I get to look at your patchset before February
> 22nd so it may be better to address the above.

Thanks for the information.
I will therefore target a new review in week 7 even if no further comments are
posted.

> 
>>
>>>
>>> ---
>>> 0-DAY CI Kernel Test Service, Intel Corporation
>>> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
>>>

[PATCH v3 07/15] rpmsg: virtio: probe the rpmsg_ctrl device

[Arnaud Pouliquen]

Instantiate the rpmsg_ioctl device on virtio RPMsg bus creation.
This provides the possibility to expose the RPMSG_CREATE_EPT_IOCTL
to create RPMsg chdev endpoint.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>

---
V3:
Fix compilation issue
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

warnings:
drivers/rpmsg/virtio_rpmsg_bus.c:978 rpmsg_probe() error: uninitialized symbol 'vch'.
drivers/rpmsg/virtio_rpmsg_bus.c:979 rpmsg_probe() error: uninitialized symbol 'rpdev_ctrl'.
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 37 +++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index e87d4cf926eb..5143fdeca306 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -813,6 +813,35 @@ static void rpmsg_xmit_done(struct virtqueue *svq)
 	wake_up_interruptible(&vrp->sendq);
 }
 
+static struct rpmsg_device *rpmsg_virtio_add_char_dev(struct virtio_device *vdev)
+{
+	struct virtproc_info *vrp = vdev->priv;
+	struct virtio_rpmsg_channel *vch;
+	struct rpmsg_device *rpdev_ctrl;
+	int err = 0;
+
+	vch = kzalloc(sizeof(*vch), GFP_KERNEL);
+	if (!vch)
+		return ERR_PTR(-ENOMEM);
+
+	/* Link the channel to the vrp */
+	vch->vrp = vrp;
+
+	/* Assign public information to the rpmsg_device */
+	rpdev_ctrl = &vch->rpdev;
+	rpdev_ctrl->ops = &virtio_rpmsg_ops;
+
+	rpdev_ctrl->dev.parent = &vrp->vdev->dev;
+	rpdev_ctrl->dev.release = virtio_rpmsg_release_device;
+	rpdev_ctrl->little_endian = virtio_is_little_endian(vrp->vdev);
+
+	err = rpmsg_ctrl_register_device(rpdev_ctrl);
+	if (err)
+		return ERR_PTR(err);
+
+	return rpdev_ctrl;
+}
+
 static int rpmsg_probe(struct virtio_device *vdev)
 {
 	vq_callback_t *vq_cbs[] = { rpmsg_recv_done, rpmsg_xmit_done };
@@ -820,7 +849,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
 	struct virtqueue *vqs[2];
 	struct virtproc_info *vrp;
 	struct virtio_rpmsg_channel *vch;
-	struct rpmsg_device *rpdev_ns;
+	struct rpmsg_device *rpdev_ns = NULL, *rpdev_ctrl = NULL;
 	void *bufs_va;
 	int err = 0, i;
 	size_t total_buf_space;
@@ -918,6 +947,11 @@ static int rpmsg_probe(struct virtio_device *vdev)
 			goto free_coherent;
 	}
 
+	rpdev_ctrl = rpmsg_virtio_add_char_dev(vdev);
+	if (IS_ERR(rpdev_ctrl)) {
+		err = PTR_ERR(rpdev_ctrl);
+		goto free_coherent;
+	}
 	/*
 	 * Prepare to kick but don't notify yet - we can't do this before
 	 * device is ready.
@@ -941,6 +975,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
 
 free_coherent:
 	kfree(vch);
+	kfree(to_virtio_rpmsg_channel(rpdev_ctrl));
 	dma_free_coherent(vdev->dev.parent, total_buf_space,
 			  bufs_va, vrp->bufs_dma);
 vqs_del:
-- 
2.17.1

Re: [PATCH v3 07/15] rpmsg: virtio: probe the rpmsg_ctrl device

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1904 bytes --]

Hi Arnaud,

I love your patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.11-rc6 next-20210125]
[cannot apply to rpmsg/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 61556703b610a104de324e4f061dc6cf7b218b46
config: arm-randconfig-s032-20210204 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # apt-get install sparse
        # sparse version: v0.6.3-215-g0fb77bb6-dirty
        # https://github.com/0day-ci/linux/commit/4033f1be7a04b2b78a2a0946a5b6544afa8b77c7
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Arnaud-Pouliquen/introduce-a-generic-IOCTL-interface-for-RPMsg-channels-management/20210204-165337
        git checkout 4033f1be7a04b2b78a2a0946a5b6544afa8b77c7
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=arm 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>, old ones prefixed by <<):

>> ERROR: modpost: "rpmsg_ctrl_register_device" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 28146 bytes --]

[PATCH v3 08/15] rpmsg: glink: add sendto and trysendto ops

[Arnaud Pouliquen]

Implement the sendto ops to support the future rpmsg_char update for the
vitio backend support.
The use of sendto in rpmsg_char is needed as a destination address is
requested at least by the virtio backend.
The glink implementation does not need a destination address so ignores it.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/qcom_glink_native.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index d4e4dd482614..ae2c03b59c55 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1332,6 +1332,20 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
 	return __qcom_glink_send(channel, data, len, false);
 }
 
+static int qcom_glink_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+
+	return __qcom_glink_send(channel, data, len, true);
+}
+
+static int qcom_glink_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+
+	return __qcom_glink_send(channel, data, len, false);
+}
+
 /*
  * Finds the device_node for the glink child interested in this channel.
  */
@@ -1364,7 +1378,9 @@ static const struct rpmsg_device_ops glink_device_ops = {
 static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
 	.destroy_ept = qcom_glink_destroy_ept,
 	.send = qcom_glink_send,
+	.sendto = qcom_glink_sendto,
 	.trysend = qcom_glink_trysend,
+	.trysendto = qcom_glink_trysendto,
 };
 
 static void qcom_glink_rpdev_release(struct device *dev)
-- 
2.17.1

[PATCH v3 09/15] rpmsg: smd: add sendto and trysendto ops

[Arnaud Pouliquen]

Implement the sendto ops to support the future rpmsg_char update for the
vitio backend support.
The use of sendto in rpmsg_char is needed as a destination address is
requested at least by the virtio backend.
The SMD implementation does not need a destination address so ignores it.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/qcom_smd.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
index 40a1c415c775..2d279c03a090 100644
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -974,6 +974,20 @@ static int qcom_smd_trysend(struct rpmsg_endpoint *ept, void *data, int len)
 	return __qcom_smd_send(qsept->qsch, data, len, false);
 }
 
+static int qcom_smd_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
+{
+	struct qcom_smd_endpoint *qsept = to_smd_endpoint(ept);
+
+	return __qcom_smd_send(qsept->qsch, data, len, true);
+}
+
+static int qcom_smd_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
+{
+	struct qcom_smd_endpoint *qsept = to_smd_endpoint(ept);
+
+	return __qcom_smd_send(qsept->qsch, data, len, false);
+}
+
 static __poll_t qcom_smd_poll(struct rpmsg_endpoint *ept,
 				  struct file *filp, poll_table *wait)
 {
@@ -1038,7 +1052,9 @@ static const struct rpmsg_device_ops qcom_smd_device_ops = {
 static const struct rpmsg_endpoint_ops qcom_smd_endpoint_ops = {
 	.destroy_ept = qcom_smd_destroy_ept,
 	.send = qcom_smd_send,
+	.sendto = qcom_smd_sendto,
 	.trysend = qcom_smd_trysend,
+	.trysendto = qcom_smd_trysendto,
 	.poll = qcom_smd_poll,
 };
 
-- 
2.17.1

[PATCH v3 10/15] rpmsg: char: use sendto to specify the message destination address

[Arnaud Pouliquen]

When the endpoint device is created by the application a destination
address as been specified in the rpmsg_channel_info structure.
Send the message to this address instead of the default one.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 83c10b39b139..09ae1304837c 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -225,9 +225,9 @@ static ssize_t rpmsg_eptdev_write_iter(struct kiocb *iocb,
 	}
 
 	if (filp->f_flags & O_NONBLOCK)
-		ret = rpmsg_trysend(eptdev->ept, kbuf, len);
+		ret = rpmsg_trysendto(eptdev->ept, kbuf, len, eptdev->chinfo.dst);
 	else
-		ret = rpmsg_send(eptdev->ept, kbuf, len);
+		ret = rpmsg_sendto(eptdev->ept, kbuf, len, eptdev->chinfo.dst);
 
 unlock_eptdev:
 	mutex_unlock(&eptdev->ept_lock);
-- 
2.17.1

[PATCH v3 11/15] rpmsg: ctrl: introduce RPMSG_CREATE_DEV_IOCTL

[Arnaud Pouliquen]

Implement the RPMSG_CREATE_DEV_IOCTL to allow the user application to
initiate a communication through a new RPMsg channel.
This Ioctl can be used to instantiate a local RPMsg device.
Depending on the back-end implementation, a NS announcement can be sent
to the remote processor.

Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_ctrl.c | 21 +++++++++++++++++----
 include/uapi/linux/rpmsg.h |  5 +++++
 2 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_ctrl.c b/drivers/rpmsg/rpmsg_ctrl.c
index f9b90e927fff..88eae475ef33 100644
--- a/drivers/rpmsg/rpmsg_ctrl.c
+++ b/drivers/rpmsg/rpmsg_ctrl.c
@@ -70,9 +70,7 @@ static long rpmsg_ctrl_ioctl(struct file *fp, unsigned int cmd, unsigned long ar
 	void __user *argp = (void __user *)arg;
 	struct rpmsg_endpoint_info eptinfo;
 	struct rpmsg_channel_info chinfo;
-
-	if (cmd != RPMSG_CREATE_EPT_IOCTL)
-		return -EINVAL;
+	struct rpmsg_device *newch;
 
 	if (copy_from_user(&eptinfo, argp, sizeof(eptinfo)))
 		return -EFAULT;
@@ -82,7 +80,22 @@ static long rpmsg_ctrl_ioctl(struct file *fp, unsigned int cmd, unsigned long ar
 	chinfo.src = eptinfo.src;
 	chinfo.dst = eptinfo.dst;
 
-	return rpmsg_chrdev_create_eptdev(ctrldev->rpdev, &ctrldev->dev, chinfo);
+	switch (cmd) {
+	case RPMSG_CREATE_EPT_IOCTL:
+		return rpmsg_chrdev_create_eptdev(ctrldev->rpdev, &ctrldev->dev, chinfo);
+
+	case RPMSG_CREATE_DEV_IOCTL:
+		newch = rpmsg_create_channel(ctrldev->rpdev, &chinfo);
+		if (!newch) {
+			dev_err(&ctrldev->dev, "rpmsg_create_channel failed\n");
+			return -ENXIO;
+		}
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+
 };
 
 static const struct file_operations rpmsg_ctrl_fops = {
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index f5ca8740f3fb..f9d5a74e7801 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -33,4 +33,9 @@ struct rpmsg_endpoint_info {
  */
 #define RPMSG_DESTROY_EPT_IOCTL	_IO(0xb5, 0x2)
 
+/**
+ * Instantiate a rpmsg service device.
+ */
+#define RPMSG_CREATE_DEV_IOCTL	_IOW(0xb5, 0x3, struct rpmsg_endpoint_info)
+
 #endif
-- 
2.17.1

[PATCH v3 12/15] rpmsg: char: introduce __rpmsg_chrdev_create_eptdev function

[Arnaud Pouliquen]

Introduce the __rpmsg_chrdev_create_eptdev internal function that returns
the rpmsg_eptdev context structure.
This patch prepares the introduction of a RPMsg device for the
char device. the RPMsg device will need a reference to the context.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 09ae1304837c..66dcb8845d6c 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -328,8 +328,9 @@ int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
 }
 EXPORT_SYMBOL(rpmsg_chrdev_eptdev_destroy);
 
-int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent,
-			       struct rpmsg_channel_info chinfo)
+static struct rpmsg_eptdev *__rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev,
+							 struct device *parent,
+							 struct rpmsg_channel_info chinfo)
 {
 	struct rpmsg_eptdev *eptdev;
 	struct device *dev;
@@ -337,7 +338,7 @@ int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent
 
 	eptdev = kzalloc(sizeof(*eptdev), GFP_KERNEL);
 	if (!eptdev)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	dev = &eptdev->dev;
 	eptdev->rpdev = rpdev;
@@ -381,7 +382,7 @@ int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent
 		put_device(dev);
 	}
 
-	return ret;
+	return eptdev;
 
 free_ept_ida:
 	ida_simple_remove(&rpmsg_ept_ida, dev->id);
@@ -391,7 +392,19 @@ int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent
 	put_device(dev);
 	kfree(eptdev);
 
-	return ret;
+	return ERR_PTR(ret);
+}
+
+int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent,
+			       struct rpmsg_channel_info chinfo)
+{
+	struct rpmsg_eptdev *eptdev;
+
+	eptdev = __rpmsg_chrdev_create_eptdev(rpdev, &rpdev->dev, chinfo);
+	if (IS_ERR(eptdev))
+		return PTR_ERR(eptdev);
+
+	return 0;
 }
 EXPORT_SYMBOL(rpmsg_chrdev_create_eptdev);
 
-- 
2.17.1

[PATCH v3 13/15] rpmsg: char: introduce a RPMsg driver for the RPmsg char device

[Arnaud Pouliquen]

A RPMsg char device allows to probe the endpoint device on a remote name
service announcement. With this patch the /dev/rpmsgX interface is created
either by a user application or by the remote firmware.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 63 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 66dcb8845d6c..d5aa874865f7 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -28,6 +28,8 @@
 
 #define RPMSG_DEV_MAX	(MINORMASK + 1)
 
+#define RPMSG_CHAR_DEVNAME "rpmsg-raw"
+
 static dev_t rpmsg_major;
 static struct class *rpmsg_class;
 
@@ -408,6 +410,51 @@ int rpmsg_chrdev_create_eptdev(struct rpmsg_device *rpdev, struct device *parent
 }
 EXPORT_SYMBOL(rpmsg_chrdev_create_eptdev);
 
+static int rpmsg_chrdev_probe(struct rpmsg_device *rpdev)
+{
+	struct rpmsg_channel_info chinfo;
+	struct rpmsg_eptdev *eptdev;
+
+	memcpy(chinfo.name, RPMSG_CHAR_DEVNAME, sizeof(RPMSG_CHAR_DEVNAME));
+	chinfo.src = rpdev->src;
+	chinfo.dst = rpdev->dst;
+
+	eptdev = __rpmsg_chrdev_create_eptdev(rpdev, &rpdev->dev, chinfo);
+	if (IS_ERR(eptdev) && rpdev->ept) {
+		rpmsg_destroy_ept(rpdev->ept);
+		return PTR_ERR(eptdev);
+	}
+
+	/* Set the private field of the default endpoint to retrieve context on callback. */
+	rpdev->ept->priv = eptdev;
+
+	return 0;
+}
+
+static void rpmsg_chrdev_remove(struct rpmsg_device *rpdev)
+{
+	int ret;
+
+	ret = device_for_each_child(&rpdev->dev, NULL, rpmsg_chrdev_eptdev_destroy);
+	if (ret)
+		dev_warn(&rpdev->dev, "failed to destroy endpoints: %d\n", ret);
+}
+
+static struct rpmsg_device_id rpmsg_chrdev_id_table[] = {
+	{ .name	= RPMSG_CHAR_DEVNAME },
+	{ },
+};
+
+static struct rpmsg_driver rpmsg_chrdev_driver = {
+	.probe = rpmsg_chrdev_probe,
+	.remove = rpmsg_chrdev_remove,
+	.id_table = rpmsg_chrdev_id_table,
+	.callback = rpmsg_ept_cb,
+	.drv = {
+		.name = "rpmsg_chrdev",
+	},
+};
+
 static int rpmsg_chrdev_init(void)
 {
 	int ret;
@@ -422,9 +469,23 @@ static int rpmsg_chrdev_init(void)
 	if (IS_ERR(rpmsg_class)) {
 		pr_err("failed to create rpmsg class\n");
 		unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
-		return PTR_ERR(rpmsg_class);
+		ret = PTR_ERR(rpmsg_class);
+		goto free_region;
 	}
 
+	ret = register_rpmsg_driver(&rpmsg_chrdev_driver);
+	if (ret < 0) {
+		pr_err("rpmsg raw: failed to register rpmsg driver\n");
+		goto free_class;
+	}
+
+	return 0;
+
+free_class:
+	class_destroy(rpmsg_class);
+free_region:
+	unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
+
 	return ret;
 }
 postcore_initcall(rpmsg_chrdev_init);
-- 
2.17.1

[PATCH v3 14/15] rpmsg: char: no dynamic endpoint management for the default one

[Arnaud Pouliquen]

Do not dynamically manage the default endpoint. The ept address must
not change.
This update is needed to manage the RPMSG_CREATE_DEV_IOCTL. In this
case a default endpoint is used and it's address must not change or
been reused by another service.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index d5aa874865f7..0b0a6b7c0c9a 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -114,14 +114,23 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 	struct rpmsg_endpoint *ept;
 	struct rpmsg_device *rpdev = eptdev->rpdev;
 	struct device *dev = &eptdev->dev;
+	u32 addr = eptdev->chinfo.src;
 
 	get_device(dev);
 
-	ept = rpmsg_create_ept(rpdev, rpmsg_ept_cb, eptdev, eptdev->chinfo);
-	if (!ept) {
-		dev_err(dev, "failed to open %s\n", eptdev->chinfo.name);
-		put_device(dev);
-		return -EINVAL;
+	/*
+	 * The ept device can has been created by a ns announcement. In this
+	 * case a default endpoint has been created. Reuse it to avoid to manage
+	 * a new address on each open close.
+	 */
+	ept = rpdev->ept;
+	if (!ept || addr != ept->addr) {
+		ept = rpmsg_create_ept(rpdev, rpmsg_ept_cb, eptdev, eptdev->chinfo);
+		if (!ept) {
+			dev_err(dev, "failed to open %s\n", eptdev->chinfo.name);
+			put_device(dev);
+			return -EINVAL;
+		}
 	}
 
 	eptdev->ept = ept;
@@ -133,12 +142,17 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
 {
 	struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
+	struct rpmsg_device *rpdev = eptdev->rpdev;
 	struct device *dev = &eptdev->dev;
 
-	/* Close the endpoint, if it's not already destroyed by the parent */
+	/*
+	 * Close the endpoint, if it's not already destroyed by the parent and it is not the
+	 * default one.
+	 */
 	mutex_lock(&eptdev->ept_lock);
 	if (eptdev->ept) {
-		rpmsg_destroy_ept(eptdev->ept);
+		if (eptdev->ept != rpdev->ept)
+			rpmsg_destroy_ept(eptdev->ept);
 		eptdev->ept = NULL;
 	}
 	mutex_unlock(&eptdev->ept_lock);
-- 
2.17.1

[PATCH v3 15/15] rpmsg: char: return an error if device already open

[Arnaud Pouliquen]

The rpmsg_create_ept function is invoked when the device is opened.
As only one endpoint must be created per device. It is not possible to
open the same device twice. But there is nothing to prevent multi open.
Return -EBUSY when device is already opened to have a generic error
instead of relying on the back-end to potentially detect the error.

Without this patch for instance the GLINK driver return -EBUSY while
the virtio bus return -ENOSPC.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
---
 drivers/rpmsg/rpmsg_char.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 0b0a6b7c0c9a..2eacddb83e29 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -116,6 +116,9 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 	struct device *dev = &eptdev->dev;
 	u32 addr = eptdev->chinfo.src;
 
+	if (eptdev->ept)
+		return -EBUSY;
+
 	get_device(dev);
 
 	/*
-- 
2.17.1