* [PATCH v3 1/2] thermal: armada: ap806: use firmware SiP services for thermal operations
2021-02-11 14:02 [PATCH v3 0/2] Enable usage of Marvell FW SIP services kostap
@ 2021-02-11 14:02 ` kostap
2021-02-11 16:47 ` kernel test robot
` (2 more replies)
2021-02-11 14:02 ` [PATCH v3 2/2] clk: mvebu: use firmware SiP service for accessing dfx register set kostap
1 sibling, 3 replies; 6+ messages in thread
From: kostap @ 2021-02-11 14:02 UTC (permalink / raw)
To: linux-pm, linux-clk, linux-kernel
Cc: Julia.Lawall, amitk, daniel.lezcano, rui.zhang, miquel.raynal,
sboyd, mturquette, mw, jaz, nadavh, stefanc, bpeled,
Konstantin Porotchkin
From: Grzegorz Jaszczyk <jaz@semihalf.com>
This patch introduces support for ap806 thermal driver in case when SoC
DFX region is marked as secure by the firmware. In such case accessing
thermal registers, which are part of dfx register set, will not be
possible from non-secure world. Due to above the ARM Trusted Firmware
exposes thermal driver as a SiP service. This allows Linux thermal
driver to initialise and perform various operations on thermal sensor
with use of SMC calls.
If during ap806 thermal initialisation the SMC is unhandled (old fw
case), fallback to regmap handling.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
---
drivers/thermal/armada_thermal.c | 125 +++++++++++++++++++-
include/soc/marvell/armada8k/fw.h | 19 +++
2 files changed, 141 insertions(+), 3 deletions(-)
create mode 100644 include/soc/marvell/armada8k/fw.h
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index c2ebfb5be4b3..ec077e834c85 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2013 Marvell
*/
+#include <linux/arm-smccc.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -18,6 +19,8 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
+#include "soc/marvell/armada8k/fw.h"
#include "thermal_core.h"
@@ -62,6 +65,8 @@
#define STATUS_POLL_TIMEOUT_US 100000
#define OVERHEAT_INT_POLL_DELAY_MS 1000
+#define THERMAL_SUPPORTED_IN_FIRMWARE(priv) (priv->data->is_smc_supported)
+
struct armada_thermal_data;
/* Marvell EBU Thermal Sensor Dev Structure */
@@ -111,6 +116,12 @@ struct armada_thermal_data {
/* One sensor is in the thermal IC, the others are in the CPUs if any */
unsigned int cpu_nr;
+
+ /*
+ * Thermal sensor operations exposed as firmware SIP services and
+ * accessed via SMC
+ */
+ bool is_smc_supported;
};
struct armada_drvdata {
@@ -135,6 +146,18 @@ struct armada_thermal_sensor {
int id;
};
+static int thermal_smc(u32 addr, u32 *reg, u32 val1, u32 val2)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(MV_SIP_DFX, addr, val1, val2, 0, 0, 0, 0, &res);
+
+ if (res.a0 == 0 && reg != NULL)
+ *reg = res.a1;
+
+ return res.a0;
+}
+
static void armadaxp_init(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
@@ -206,6 +229,27 @@ static void armada375_init(struct platform_device *pdev,
static int armada_wait_sensor_validity(struct armada_thermal_priv *priv)
{
u32 reg;
+ int ret;
+ ktime_t timeout;
+
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv)) {
+ timeout = ktime_add_us(ktime_get(), STATUS_POLL_TIMEOUT_US);
+ do {
+ ret = thermal_smc(MV_SIP_DFX_THERMAL_IS_VALID,
+ ®, 0, 0);
+ if (ret || reg)
+ break;
+
+ usleep_range((STATUS_POLL_PERIOD_US >> 2) + 1,
+ STATUS_POLL_PERIOD_US);
+
+ } while (ktime_before(ktime_get(), timeout));
+
+ if (ret == SMCCC_RET_SUCCESS)
+ return reg ? 0 : -ETIMEDOUT;
+
+ return ret;
+ }
return regmap_read_poll_timeout(priv->syscon,
priv->data->syscon_status_off, reg,
@@ -238,6 +282,22 @@ static void armada_ap806_init(struct platform_device *pdev,
{
struct armada_thermal_data *data = priv->data;
u32 reg;
+ int ret;
+
+ /*
+ * The ap806 thermal sensor registers are part of DFX which is secured
+ * by latest firmware, therefore accessing relevant registers from
+ * not-secure world will not be possible. In that case Arm Trusted
+ * Firmware exposes thermal operations as firmware run-time service. If
+ * SMC initialization succeeds, perform other thermal operations using
+ * SMC, otherwise (old fw case) fallback to regmap handling.
+ */
+ ret = thermal_smc(MV_SIP_DFX_THERMAL_INIT, 0x0, 0, 0);
+ if (ret == SMCCC_RET_SUCCESS) {
+ dev_info(&pdev->dev, "firmware support\n");
+ THERMAL_SUPPORTED_IN_FIRMWARE(priv) = true;
+ return;
+ }
regmap_read(priv->syscon, data->syscon_control0_off, ®);
reg &= ~CONTROL0_TSEN_RESET;
@@ -274,11 +334,17 @@ static void armada_cp110_init(struct platform_device *pdev,
static bool armada_is_valid(struct armada_thermal_priv *priv)
{
+ int ret;
u32 reg;
if (!priv->data->is_valid_bit)
return true;
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv)) {
+ ret = thermal_smc(MV_SIP_DFX_THERMAL_IS_VALID, ®, 0, 0);
+ return ret ? false : reg;
+ }
+
regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
return reg & priv->data->is_valid_bit;
@@ -324,6 +390,7 @@ static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
{
struct armada_thermal_data *data = priv->data;
u32 ctrl0;
+ int ret;
if (channel < 0 || channel > priv->data->cpu_nr)
return -EINVAL;
@@ -331,6 +398,16 @@ static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
if (priv->current_channel == channel)
return 0;
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv)) {
+ ret = thermal_smc(MV_SIP_DFX_THERMAL_SEL_CHANNEL,
+ NULL, channel, 0);
+ if (ret)
+ return ret;
+
+ priv->current_channel = channel;
+ goto is_valid;
+ }
+
/* Stop the measurements */
regmap_read(priv->syscon, data->syscon_control0_off, &ctrl0);
ctrl0 &= ~CONTROL0_TSEN_START;
@@ -357,6 +434,7 @@ static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
ctrl0 |= CONTROL0_TSEN_START;
regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+is_valid:
/*
* The IP has a latency of ~15ms, so after updating the selected source,
* we must absolutely wait for the sensor validity bit to ensure we read
@@ -376,6 +454,9 @@ static int armada_read_sensor(struct armada_thermal_priv *priv, int *temp)
u32 reg, div;
s64 sample, b, m;
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv))
+ return thermal_smc(MV_SIP_DFX_THERMAL_READ, temp, 0, 0);
+
regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
if (priv->data->signed_sample)
@@ -559,7 +640,13 @@ static irqreturn_t armada_overheat_isr_thread(int irq, void *blob)
goto enable_irq;
} while (temperature >= low_threshold);
- regmap_read(priv->syscon, priv->data->dfx_irq_cause_off, &dummy);
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv)) {
+ if (thermal_smc(MV_SIP_DFX_THERMAL_IRQ, 0, 0, 0))
+ return IRQ_NONE;
+ } else {
+ regmap_read(priv->syscon, priv->data->dfx_irq_cause_off,
+ &dummy);
+ }
/* Notify the thermal core that the temperature is acceptable again */
thermal_zone_device_update(priv->overheat_sensor,
@@ -772,6 +859,27 @@ static void armada_set_sane_name(struct platform_device *pdev,
} while (insane_char);
}
+/*
+ * Let the firmware configure the thermal overheat threshold, hysteresis and
+ * enable overheat interrupt
+ */
+static int armada_fw_overheat_settings(struct armada_thermal_priv *priv,
+ int thresh_mc, int hyst_mc)
+{
+ int ret;
+
+ ret = thermal_smc(MV_SIP_DFX_THERMAL_THRESH, NULL, thresh_mc, hyst_mc);
+ if (ret)
+ return ret;
+
+ if (thresh_mc >= 0)
+ priv->current_threshold = thresh_mc;
+ if (hyst_mc >= 0)
+ priv->current_hysteresis = hyst_mc;
+
+ return 0;
+}
+
/*
* The IP can manage to trigger interrupts on overheat situation from all the
* sensors. However, the interrupt source changes along with the last selected
@@ -803,11 +911,22 @@ static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
if (ret)
return ret;
+ priv->overheat_sensor = tz;
+ priv->interrupt_source = sensor_id;
+
+ if (THERMAL_SUPPORTED_IN_FIRMWARE(priv)) {
+ /*
+ * When thermal supported in firmware the configuring overheat
+ * threshold and enabling overheat interrupt is done in one
+ * step.
+ */
+ return armada_fw_overheat_settings(priv, trips[i].temperature,
+ trips[i].hysteresis);
+ }
+
armada_set_overheat_thresholds(priv,
trips[i].temperature,
trips[i].hysteresis);
- priv->overheat_sensor = tz;
- priv->interrupt_source = sensor_id;
armada_enable_overheat_interrupt(priv);
diff --git a/include/soc/marvell/armada8k/fw.h b/include/soc/marvell/armada8k/fw.h
new file mode 100644
index 000000000000..2a80f26cbf6f
--- /dev/null
+++ b/include/soc/marvell/armada8k/fw.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ */
+
+#ifndef _SOC_MARVELL_ARMADA8K_FW_H
+#define _SOC_MARVELL_ARMADA8K_FW_H
+
+/* FW related definitions */
+#define MV_SIP_DFX 0x82000014
+
+#define MV_SIP_DFX_THERMAL_INIT 1
+#define MV_SIP_DFX_THERMAL_READ 2
+#define MV_SIP_DFX_THERMAL_IS_VALID 3
+#define MV_SIP_DFX_THERMAL_IRQ 4
+#define MV_SIP_DFX_THERMAL_THRESH 5
+#define MV_SIP_DFX_THERMAL_SEL_CHANNEL 6
+
+#endif /* _SOC_MARVELL_ARMADA8K_FW_H */
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/2] clk: mvebu: use firmware SiP service for accessing dfx register set
2021-02-11 14:02 [PATCH v3 0/2] Enable usage of Marvell FW SIP services kostap
2021-02-11 14:02 ` [PATCH v3 1/2] thermal: armada: ap806: use firmware SiP services for thermal operations kostap
@ 2021-02-11 14:02 ` kostap
1 sibling, 0 replies; 6+ messages in thread
From: kostap @ 2021-02-11 14:02 UTC (permalink / raw)
To: linux-pm, linux-clk, linux-kernel
Cc: Julia.Lawall, amitk, daniel.lezcano, rui.zhang, miquel.raynal,
sboyd, mturquette, mw, jaz, nadavh, stefanc, bpeled,
Konstantin Porotchkin
From: Grzegorz Jaszczyk <jaz@semihalf.com>
This patch introduces support for cpu clk driver in case when SoC
DFX region is marked as secure by the firmware. In such case accessing
cpu clk registers, which are part of dfx register set, will not be
possible from non-secure world.
The ARM Trusted Firmware exposes SiP service which allows to read/write
some dfx registers (white-listed in firmware). This allows Linux cpu clk
driver to set_rate and recalc_rate with use of SMC calls.
If during cpu clk operation the SMC is unhandled (old fw case), fallback
to regmap handling.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
---
drivers/clk/mvebu/ap-cpu-clk.c | 174 ++++++++++++++++++--
include/soc/marvell/armada8k/fw.h | 3 +
2 files changed, 161 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/mvebu/ap-cpu-clk.c b/drivers/clk/mvebu/ap-cpu-clk.c
index b4259b60dcfd..9ddfa3f8a32d 100644
--- a/drivers/clk/mvebu/ap-cpu-clk.c
+++ b/drivers/clk/mvebu/ap-cpu-clk.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) "ap-cpu-clk: " fmt
+#include <linux/arm-smccc.h>
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
@@ -19,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include "armada_ap_cp_helper.h"
+#include "soc/marvell/armada8k/fw.h"
#define AP806_CPU_CLUSTER0 0
#define AP806_CPU_CLUSTER1 1
@@ -139,8 +141,122 @@ struct ap_cpu_clk {
struct clk_hw hw;
struct regmap *pll_cr_base;
const struct cpu_dfs_regs *pll_regs;
+ phys_addr_t phys;
+ int (*clk_regmap_read)(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int *val);
+ int (*clk_regmap_write)(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int val);
+ int (*clk_regmap_update_bits)(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int mask, unsigned int val);
+ int (*clk_regmap_read_poll_timeout)(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int stable_bit);
+
};
+static int dfx_sread_smc(unsigned long addr, unsigned int *reg)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(MV_SIP_DFX, MV_SIP_DFX_SREAD, addr, 0, 0, 0, 0, 0, &res);
+
+ if (res.a0 == 0 && reg != NULL)
+ *reg = res.a1;
+
+ return res.a0;
+}
+
+static int dfx_swrite_smc(unsigned long addr, unsigned long val)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(MV_SIP_DFX, MV_SIP_DFX_SWRITE, addr, val,
+ 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int smc_regmap_read(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int *val)
+{
+ return dfx_sread_smc(clk->phys + reg, val);
+}
+
+static int legacy_regmap_read(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int *val)
+{
+ return regmap_read(clk->pll_cr_base, reg, val);
+}
+
+static int smc_regmap_write(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int val)
+{
+ return dfx_swrite_smc(clk->phys + reg, val);
+}
+
+static int legacy_regmap_write(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int val)
+{
+ return regmap_write(clk->pll_cr_base, reg, val);
+}
+
+static int smc_regmap_update_bits(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ int ret;
+ unsigned int tmp;
+
+ ret = dfx_sread_smc(clk->phys + reg, &tmp);
+ if (ret != SMCCC_RET_SUCCESS)
+ return ret;
+
+ tmp &= ~mask;
+ tmp |= val & mask;
+
+ return dfx_swrite_smc(clk->phys + reg, tmp);
+}
+
+static int legacy_regmap_update_bits(struct ap_cpu_clk *clk, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ return regmap_update_bits(clk->pll_cr_base, reg, mask, val);
+}
+
+static int smc_regmap_read_poll_timeout(struct ap_cpu_clk *clk,
+ unsigned int reg,
+ unsigned int stable_bit)
+{
+ int ret;
+ u32 val;
+ ktime_t timeout;
+
+ timeout = ktime_add_us(ktime_get(), STATUS_POLL_TIMEOUT_US);
+ do {
+ ret = dfx_sread_smc(clk->phys + reg, &val);
+ if (ret || (val & stable_bit))
+ break;
+
+ usleep_range((STATUS_POLL_PERIOD_US >> 2) + 1,
+ STATUS_POLL_PERIOD_US);
+
+ } while (ktime_before(ktime_get(), timeout));
+
+ if (ret == SMCCC_RET_SUCCESS)
+ return (val & stable_bit) ? 0 : -ETIMEDOUT;
+
+ return ret;
+}
+
+static int legacy_regmap_read_poll_timeout(struct ap_cpu_clk *clk,
+ unsigned int reg,
+ unsigned int stable_bit)
+{
+ u32 val;
+
+ return regmap_read_poll_timeout(clk->pll_cr_base,
+ reg, val,
+ (val & stable_bit), STATUS_POLL_PERIOD_US,
+ STATUS_POLL_TIMEOUT_US);
+}
static unsigned long ap_cpu_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -150,7 +266,7 @@ static unsigned long ap_cpu_clk_recalc_rate(struct clk_hw *hw,
cpu_clkdiv_reg = clk->pll_regs->divider_reg +
(clk->cluster * clk->pll_regs->cluster_offset);
- regmap_read(clk->pll_cr_base, cpu_clkdiv_reg, &cpu_clkdiv_ratio);
+ clk->clk_regmap_read(clk, cpu_clkdiv_reg, &cpu_clkdiv_ratio);
cpu_clkdiv_ratio &= clk->pll_regs->divider_mask;
cpu_clkdiv_ratio >>= clk->pll_regs->divider_offset;
@@ -171,7 +287,7 @@ static int ap_cpu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
cpu_ratio_reg = clk->pll_regs->ratio_reg +
(clk->cluster * clk->pll_regs->cluster_offset);
- regmap_read(clk->pll_cr_base, cpu_clkdiv_reg, ®);
+ clk->clk_regmap_read(clk, cpu_clkdiv_reg, ®);
reg &= ~(clk->pll_regs->divider_mask);
reg |= (divider << clk->pll_regs->divider_offset);
@@ -184,29 +300,27 @@ static int ap_cpu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
reg |= ((divider * clk->pll_regs->divider_ratio) <<
AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_OFFSET);
}
- regmap_write(clk->pll_cr_base, cpu_clkdiv_reg, reg);
+ clk->clk_regmap_write(clk, cpu_clkdiv_reg, reg);
+ clk->clk_regmap_update_bits(clk, cpu_force_reg,
+ clk->pll_regs->force_mask,
+ clk->pll_regs->force_mask);
- regmap_update_bits(clk->pll_cr_base, cpu_force_reg,
- clk->pll_regs->force_mask,
- clk->pll_regs->force_mask);
-
- regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
- BIT(clk->pll_regs->ratio_offset),
- BIT(clk->pll_regs->ratio_offset));
+ clk->clk_regmap_update_bits(clk, cpu_ratio_reg,
+ BIT(clk->pll_regs->ratio_offset),
+ BIT(clk->pll_regs->ratio_offset));
stable_bit = BIT(clk->pll_regs->ratio_state_offset +
clk->cluster *
clk->pll_regs->ratio_state_cluster_offset);
- ret = regmap_read_poll_timeout(clk->pll_cr_base,
- clk->pll_regs->ratio_state_reg, reg,
- reg & stable_bit, STATUS_POLL_PERIOD_US,
- STATUS_POLL_TIMEOUT_US);
+ ret = clk->clk_regmap_read_poll_timeout(clk,
+ clk->pll_regs->ratio_state_reg,
+ stable_bit);
if (ret)
return ret;
- regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
- BIT(clk->pll_regs->ratio_offset), 0);
+ clk->clk_regmap_update_bits(clk, cpu_ratio_reg,
+ BIT(clk->pll_regs->ratio_offset), 0);
return 0;
}
@@ -235,6 +349,11 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
struct clk_hw_onecell_data *ap_cpu_data;
struct ap_cpu_clk *ap_cpu_clk;
struct regmap *regmap;
+ struct resource res;
+
+ ret = of_address_to_resource(np->parent, 0, &res);
+ if (ret)
+ return ret;
regmap = syscon_node_to_regmap(np->parent);
if (IS_ERR(regmap)) {
@@ -286,6 +405,7 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
const char *parent_name;
struct clk *parent;
int cpu, err;
+ unsigned int tmp;
err = of_property_read_u32(dn, "reg", &cpu);
if (WARN_ON(err))
@@ -313,6 +433,28 @@ static int ap_cpu_clock_probe(struct platform_device *pdev)
ap_cpu_clk[cluster_index].dev = dev;
ap_cpu_clk[cluster_index].pll_regs = of_device_get_match_data(&pdev->dev);
+ /* Get the physical address to hand to the firmware. */
+ ap_cpu_clk[cluster_index].phys = res.start;
+
+ /* Try to read a register using SMC and setup DFX access APIs accordingly */
+ ret = smc_regmap_read(&ap_cpu_clk[cluster_index],
+ ap_cpu_clk[cluster_index].pll_regs->divider_reg,
+ &tmp);
+ if (ret == SMCCC_RET_SUCCESS) {
+ ap_cpu_clk[cluster_index].clk_regmap_read = smc_regmap_read;
+ ap_cpu_clk[cluster_index].clk_regmap_write = smc_regmap_write;
+ ap_cpu_clk[cluster_index].clk_regmap_update_bits = smc_regmap_update_bits;
+ ap_cpu_clk[cluster_index].clk_regmap_read_poll_timeout =
+ smc_regmap_read_poll_timeout;
+ } else {
+ ap_cpu_clk[cluster_index].clk_regmap_read = legacy_regmap_read;
+ ap_cpu_clk[cluster_index].clk_regmap_write = legacy_regmap_write;
+ ap_cpu_clk[cluster_index].clk_regmap_update_bits =
+ legacy_regmap_update_bits;
+ ap_cpu_clk[cluster_index].clk_regmap_read_poll_timeout =
+ legacy_regmap_read_poll_timeout;
+ }
+
init.name = ap_cpu_clk[cluster_index].clk_name;
init.ops = &ap_cpu_clk_ops;
init.num_parents = 1;
diff --git a/include/soc/marvell/armada8k/fw.h b/include/soc/marvell/armada8k/fw.h
index 2a80f26cbf6f..e646212a3796 100644
--- a/include/soc/marvell/armada8k/fw.h
+++ b/include/soc/marvell/armada8k/fw.h
@@ -16,4 +16,7 @@
#define MV_SIP_DFX_THERMAL_THRESH 5
#define MV_SIP_DFX_THERMAL_SEL_CHANNEL 6
+#define MV_SIP_DFX_SREAD 20
+#define MV_SIP_DFX_SWRITE 21
+
#endif /* _SOC_MARVELL_ARMADA8K_FW_H */
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread